update prusa profiles

resources/profiles/Prusa.json

@@ -1,6 +1,6 @@
 {
     "name": "Prusa",
-    "version": "02.01.01.20",
+    "version": "02.01.01.30",
     "force_update": "0",
     "description": "Prusa configurations",
     "machine_model_list": [

resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_5",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ABS @MK4.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @MK4",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ABS @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @XL 5T",
     "from": "system",
@@ -57,7 +56,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS @XL",
     "from": "system",
@@ -42,7 +41,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "50",
     "filament_retract_lift_below": "1.5",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusa Generic ABS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ABS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98_5",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ASA @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ASA @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ASA @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ASA @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ASA @MK4.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ASA @MK4",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic ASA.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98",
     "setting_id": "GFSA04",
     "name": "Prusa Generic ASA",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN99_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN99_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA-CF @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA-CF @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA-CF @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA-CF @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA-CF @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA-CF @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA-CF @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA-CF @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA-CF.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA-CF",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PA.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PA",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PC @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFC99_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PC @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PC @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFC99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PC @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PC @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFC99_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PC @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PC @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFC99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PC @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PC.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFC99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PC",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99_5",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PETG @MK4.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @MK4",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PETG @XL 5T.json

@@ -1,7 +1,6 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
+    "setting_id": "GFG99_PRUSA_0",
-    "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @XL 5T",
     "from": "system",
     "instantiation": "true",
@@ -60,7 +59,7 @@
     ],
     "filament_wipe": "1",
     "filament_retract_before_wipe": "20%",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG @XL",
     "from": "system",
@@ -45,7 +44,7 @@
     "filament_retract_lift_below": "1.5",
     "filament_wipe": "1",
     "filament_retract_before_wipe": "20%",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusa Generic PETG.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PETG",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_5",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA @MK4.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @MK4",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @XL 5T",
     "from": "system",
@@ -55,7 +54,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",
@@ -64,4 +63,4 @@
         "Prusa XL 5T 0.6 nozzle",
         "Prusa XL 5T 0.8 nozzle"
     ]
-}
+}

resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA @XL",
     "from": "system",
@@ -40,7 +39,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "3.5",
     "filament_retract_lift_below": "0.6",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusa Generic PLA-CF @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL98_5",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA-CF @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA-CF @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL98_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA-CF @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA-CF @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL98_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA-CF @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA-CF @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL98_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA-CF @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA-CF.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL98",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA-CF",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PLA.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PLA",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PVA @MINIIS 0.25.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99_4",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PVA @MINIIS 0.25",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PVA @MINIIS 0.6.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PVA @MINIIS 0.6",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PVA @MINIIS 0.8.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99_3",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PVA @MINIIS 0.8",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PVA @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PVA @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic PVA.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic PVA",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic TPU @MINIIS.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFU99_2",
     "setting_id": "GFSA04",
     "name": "Prusa Generic TPU @MINIIS",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic TPU @MK4.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFU99_1",
     "setting_id": "GFSA04",
     "name": "Prusa Generic TPU @MK4",
     "from": "system",

resources/profiles/Prusa/filament/Prusa Generic TPU.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFU99",
     "setting_id": "GFSA04",
     "name": "Prusa Generic TPU",
     "from": "system",

resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98",
     "setting_id": "GFSA04",
     "name": "Prusament ASA @XL 5T",
     "from": "system",
@@ -59,7 +58,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament ASA @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFB98",
     "setting_id": "GFSA04",
     "name": "Prusament ASA @XL",
     "from": "system",
@@ -44,7 +43,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "50",
     "filament_retract_lift_below": "1.5",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98",
     "setting_id": "GFSA04",
     "name": "Prusament PA-CF @XL 5T",
     "from": "system",
@@ -59,7 +58,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PA-CF @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFN98",
     "setting_id": "GFSA04",
     "name": "Prusament PA-CF @XL",
     "from": "system",
@@ -44,7 +43,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "50",
     "filament_retract_lift_below": "1.5",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PC Blend @XL 5T",
     "from": "system",
@@ -59,7 +58,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PC Blend @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PC Blend @XL",
     "from": "system",
@@ -44,7 +43,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "50",
     "filament_retract_lift_below": "1.5",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PC-CF @XL 5T",
     "from": "system",
@@ -59,7 +58,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PC-CF @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PC-CF @XL",
     "from": "system",
@@ -44,7 +43,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "50",
     "filament_retract_lift_below": "1.5",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json

@@ -1,7 +1,6 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
+    "setting_id": "GFG99_PRUSA_1",
-    "setting_id": "GFSA04",
     "name": "Prusament PETG @XL 5T",
     "from": "system",
     "instantiation": "true",
@@ -60,7 +59,7 @@
     ],
     "filament_wipe": "1",
     "filament_retract_before_wipe": "20%",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PETG @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PETG @XL",
     "from": "system",
@@ -45,7 +44,7 @@
     "filament_retract_lift_below": "1.5",
     "filament_wipe": "1",
     "filament_retract_before_wipe": "20%",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PLA @XL 5T",
     "from": "system",
@@ -55,7 +54,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PLA @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament PLA @XL",
     "from": "system",
@@ -40,7 +39,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "3.5",
     "filament_retract_lift_below": "0.6",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99",
     "setting_id": "GFSA04",
     "name": "Prusament PVB @XL 5T",
     "from": "system",
@@ -60,7 +59,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament PVB @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFS99",
     "setting_id": "GFSA04",
     "name": "Prusament PVB @XL",
     "from": "system",
@@ -45,7 +44,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "3.5",
     "filament_retract_lift_below": "0.6",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament rPLA @XL 5T",
     "from": "system",
@@ -58,7 +57,7 @@
     "filament_stamping_loading_speed": [
         "29"
     ],
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 5T 0.25 nozzle",
         "Prusa XL 5T 0.3 nozzle",

resources/profiles/Prusa/filament/Prusament rPLA @XL.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFL99_1",
     "setting_id": "GFSA04",
     "name": "Prusament rPLA @XL",
     "from": "system",
@@ -43,7 +42,7 @@
     "filament_cooling_initial_speed": "10",
     "filament_cooling_final_speed": "3.5",
     "filament_retract_lift_below": "0.6",
-    "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
     "compatible_printers": [
         "Prusa XL 0.25 nozzle",
         "Prusa XL 0.3 nozzle",

resources/profiles/Prusa/filament/fdm_filament_abs.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFB99",
     "cool_plate_temp": [
         "105"
     ],

resources/profiles/Prusa/filament/fdm_filament_asa.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFB98",
     "cool_plate_temp" : [
         "105"
     ],

resources/profiles/Prusa/filament/fdm_filament_pa.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFN99",
     "cool_plate_temp" : [
         "0"
     ],

resources/profiles/Prusa/filament/fdm_filament_pa11cf.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFN98",
     "cool_plate_temp" : [
         "0"
     ],

resources/profiles/Prusa/filament/fdm_filament_pc.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFC99",
     "cool_plate_temp" : [
         "0"
     ],

resources/profiles/Prusa/filament/fdm_filament_pccf.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFC98",
     "cool_plate_temp" : [
         "0"
     ],

resources/profiles/Prusa/filament/fdm_filament_pet.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFT02",
     "cool_plate_temp" : [
         "60"
     ],

resources/profiles/Prusa/filament/fdm_filament_pla.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFL99",
     "fan_cooling_layer_time": [
         "100"
     ],

resources/profiles/Prusa/filament/fdm_filament_pva.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFS99",
     "cool_plate_temp" : [
         "35"
     ],

resources/profiles/Prusa/filament/fdm_filament_pvb.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFS98",
     "cool_plate_temp" : [
         "35"
     ],

resources/profiles/Prusa/filament/fdm_filament_tpu.json

@@ -4,6 +4,7 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_id": "GFU99",
     "cool_plate_temp" : [
         "30"
     ],