From 7b88104870944d7f3a41c758ea0f4f4472db1943 Mon Sep 17 00:00:00 2001 From: SoftFever Date: Thu, 10 Aug 2023 20:43:00 +0800 Subject: [PATCH] update locale --- localization/i18n/OrcaSlicer.pot | 37 ++++++++++++++++++--- localization/i18n/cs/OrcaSlicer_cs.po | 37 ++++++++++++++++++--- localization/i18n/de/OrcaSlicer_de.po | 37 ++++++++++++++++++--- localization/i18n/en/OrcaSlicer_en.po | 37 ++++++++++++++++++--- localization/i18n/es/OrcaSlicer_es.po | 37 ++++++++++++++++++--- localization/i18n/fr/OrcaSlicer_fr.po | 37 ++++++++++++++++++--- localization/i18n/hu/OrcaSlicer_hu.po | 37 ++++++++++++++++++--- localization/i18n/it/OrcaSlicer_it.po | 37 ++++++++++++++++++--- localization/i18n/ja/OrcaSlicer_ja.po | 37 ++++++++++++++++++--- localization/i18n/ko/OrcaSlicer_ko.po | 37 ++++++++++++++++++--- localization/i18n/nl/OrcaSlicer_nl.po | 37 ++++++++++++++++++--- localization/i18n/ru/OrcaSlicer_ru.po | 37 ++++++++++++++++++--- localization/i18n/sv/OrcaSlicer_sv.po | 37 ++++++++++++++++++--- localization/i18n/uk/OrcaSlicer_uk.po | 37 ++++++++++++++++++--- localization/i18n/zh_cn/OrcaSlicer_zh_CN.po | 37 ++++++++++++++++++--- 15 files changed, 495 insertions(+), 60 deletions(-) diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 9e389614d6..684ae27936 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -5029,6 +5029,12 @@ msgid "" "the overhang degree range and wall speed is used" msgstr "" +msgid "Bridge" +msgstr "" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "" @@ -5952,9 +5958,6 @@ msgstr "" msgid "Bottom surface" msgstr "" -msgid "Bridge" -msgstr "" - msgid "Gap infill" msgstr "" @@ -6461,6 +6464,21 @@ msgid "" "pattern" msgstr "" +msgid "One wall threshold" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "" @@ -6484,12 +6502,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "" msgid "mm/s" msgstr "" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index b03d892413..60ae52f9a2 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: 2023-07-17 21:51+0200\n" "Last-Translator: Momo \n" "Language-Team: \n" @@ -5361,6 +5361,12 @@ msgstr "" "jako procento šířky extruze. 0 rychlost znamená žádné zpomalení pro používá " "s rozsahy stupňů převisů a rychlost stěny" +msgid "Bridge" +msgstr "Most" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Cestovní rychlost" @@ -6347,9 +6353,6 @@ msgstr "Horní plocha" msgid "Bottom surface" msgstr "Spodní plocha" -msgid "Bridge" -msgstr "Most" - msgid "Gap infill" msgstr "Výplň mezery" @@ -6950,6 +6953,21 @@ msgstr "" "Používejte pouze jednu stěnu na rovném horním povrchu, abyste získali více " "prostoru pro horní vzor výplně" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Pouze jedna stěna v první vrstvě" @@ -6975,12 +6993,23 @@ msgstr "Povolte tuto volbu pro zpomalení tisku pro různé stupně převisů" msgid "mm/s or %" msgstr "mm/s or %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Rychlost mostu a zcela převislé stěny" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Šířka Límce" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index cffc637f7e..c17eceb4c5 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -5503,6 +5503,12 @@ msgstr "" "von 0 bedeutet keine Verlangsamung für den Überhangsbereich und es wird die " "Wandgeschwindigkeit verwendet." +msgid "Bridge" +msgstr "Überbrückung" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Fahrgeschwindigkeit" @@ -6520,9 +6526,6 @@ msgstr "Obere Oberfläche" msgid "Bottom surface" msgstr "Untere Fläche" -msgid "Bridge" -msgstr "Überbrückung" - msgid "Gap infill" msgstr "Lückenfüllung" @@ -7150,6 +7153,21 @@ msgstr "" "Verwenden Sie nur eine Wand auf der Oberfläche, um mehr Platz für das obere " "Füllungsmuster zu schaffen" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Nur eine Wand in der ersten Schicht" @@ -7177,12 +7195,23 @@ msgstr "" msgid "mm/s or %" msgstr "mm/s o. %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Geschwindigkeit für Brücken und vollständig überhängende Wände." msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Randbreite" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 9fc0569e40..35f03cc46d 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5319,6 +5319,12 @@ msgstr "" "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" +msgid "Bridge" +msgstr "Bridge" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Travel speed" @@ -6301,9 +6307,6 @@ msgstr "Top surface" msgid "Bottom surface" msgstr "Bottom surface" -msgid "Bridge" -msgstr "Bridge" - msgid "Gap infill" msgstr "Gap infill" @@ -6900,6 +6903,21 @@ msgstr "" "Use only one wall on flat top surfaces, to give more space to the top infill " "pattern" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Only one wall on first layer" @@ -6925,12 +6943,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "This is the speed for bridges and 100% overhang walls." msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Brim width" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index f13203bd34..2255dfc8ad 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5457,6 +5457,12 @@ msgstr "" "significa que no hay ralentización para el rango de grados de voladizo y se " "utiliza la velocidad de la pared" +msgid "Bridge" +msgstr "Puente" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Velocidad de desplazamiento" @@ -6464,9 +6470,6 @@ msgstr "Superficie superior" msgid "Bottom surface" msgstr "Superficie inferior" -msgid "Bridge" -msgstr "Puente" - msgid "Gap infill" msgstr "Relleno de huecos" @@ -7092,6 +7095,21 @@ msgstr "" "Sólo una pared en la superficies superiores, para dar más espacio al " "patrónde relleno superior" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Solo un pared en la primera capa" @@ -7119,12 +7137,23 @@ msgstr "" msgid "mm/s or %" msgstr "mm/s o %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Velocidad del puente y pared completo en voladizo" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Ancho de del borde de adherencia" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index b15aaf4355..1642873b32 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril\n" @@ -5486,6 +5486,12 @@ msgstr "" "vitesse à 0 signifie qu'il n'y a pas de ralentissement pour la plage de " "degrés des surplombs et que la vitesse des parois est utilisée" +msgid "Bridge" +msgstr "Ponts" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Vitesse de déplacements" @@ -6507,9 +6513,6 @@ msgstr "Surface supérieure" msgid "Bottom surface" msgstr "Surface inférieure" -msgid "Bridge" -msgstr "Ponts" - msgid "Gap infill" msgstr "Remplissage des espaces" @@ -7145,6 +7148,21 @@ msgstr "" "Utiliser qu'une seule paroi sur une surface plane pour donner plus d'espace " "au motif de remplissage supérieur" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Une seule paroi sur la première couche" @@ -7170,12 +7188,23 @@ msgstr "Permet de ralentir l'impression pour différents degrés de surplomb" msgid "mm/s or %" msgstr "mm/s ou %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Vitesse des ponts et parois complètement en surplombs" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Largeur de la bordure" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index ea495db89e..725687d434 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5365,6 +5365,12 @@ msgstr "" "a vonalszélesség százalékában van kifejezve. A 0 sebesség azt jelenti, hogy " "nem történik lassítás, és a fal nyomtatási sebessége kerül alkalmazásra." +msgid "Bridge" +msgstr "Áthidalás" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Mozgás sebessége" @@ -6361,9 +6367,6 @@ msgstr "Felső felület" msgid "Bottom surface" msgstr "Alsó felület" -msgid "Bridge" -msgstr "Áthidalás" - msgid "Gap infill" msgstr "Réskitöltés" @@ -6973,6 +6976,21 @@ msgstr "" "Csak egy falat használ a sík felső felületeken, hogy több hely maradjon a " "felső kitöltési mintának" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Only one wall on first layer" @@ -6998,12 +7016,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Az áthidalások és a teljesen túlnyúló falak nyomtatási sebessége" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Perem szélessége" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index 61252be850..4fbed2d0a4 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5353,6 +5353,12 @@ msgstr "" "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" +msgid "Bridge" +msgstr "Bridge" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Travel speed" @@ -6338,9 +6344,6 @@ msgstr "Top surface" msgid "Bottom surface" msgstr "Bottom surface" -msgid "Bridge" -msgstr "Bridge" - msgid "Gap infill" msgstr "Gap infill" @@ -6944,6 +6947,21 @@ msgstr "" "Use only one wall on flat top surfaces, to give more space to the top infill " "pattern" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Solo un perimetro sul primo layer" @@ -6969,12 +6987,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "This is the speed for bridges and 100% overhang walls." msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Larghezza brim" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index 760cc69500..ceee3617fa 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5213,6 +5213,12 @@ msgstr "" "オーバーハングを造形時の速度です。オーバーハングの角度が線幅に対する割合で表" "示します。0は減速無しで壁面の速度が使用されます。" +msgid "Bridge" +msgstr "ブリッジ" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "移動速度" @@ -6167,9 +6173,6 @@ msgstr "トップ面" msgid "Bottom surface" msgstr "底面" -msgid "Bridge" -msgstr "ブリッジ" - msgid "Gap infill" msgstr "隙間インフィル" @@ -6730,6 +6733,21 @@ msgid "" "pattern" msgstr "トップ面に1層だけ造形します、インフィルを多い空間を与えます。" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Only one wall on first layer" @@ -6755,12 +6773,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "ブリッジを造形する時に速度です。" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "ブリム幅" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index a02b89659d..dc282f77e0 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: 2023-08-03 10:45+0900\n" "Last-Translator: Hotsolidinfill\n" "Language-Team: \n" @@ -5287,6 +5287,12 @@ msgstr "" "로 표시됩니다. 0 속도는 돌출부 정도에 대한 감속이 없음을 의미하며 벽 속도가 " "사용됩니다" +msgid "Bridge" +msgstr "다리" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "이동 속도(트레블)" @@ -6261,9 +6267,6 @@ msgstr "상단 표면" msgid "Bottom surface" msgstr "하단 표면" -msgid "Bridge" -msgstr "다리" - msgid "Gap infill" msgstr "틈(갭) 채우기" @@ -6849,6 +6852,21 @@ msgstr "" "평평한 상단 표면에 하나의 벽만 사용하여 상단 표면 패턴에 더 많은 공간을 제공" "합니다" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "첫 레이어에서 벽 하나만 그리기" @@ -6873,12 +6891,23 @@ msgstr "돌출부 정도에 따라 출력 속도를 낮추려면 이 옵션을 msgid "mm/s or %" msgstr "mm/s or %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "다리와 완전히 돌출된 돌출부 벽의 속도" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "챙(브림) 너비" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index c1826ef8e5..72a434850c 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5424,6 +5424,12 @@ msgstr "" "afgeremd wordt voor overhanggraden en dat dezelfde snelheid als voor wanden " "gebruikt wordt." +msgid "Bridge" +msgstr "Brug" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Verplaatsing-sneleheid" @@ -6430,9 +6436,6 @@ msgstr "Bovenvlak" msgid "Bottom surface" msgstr "Bodem oppervlak" -msgid "Bridge" -msgstr "Brug" - msgid "Gap infill" msgstr "Gat opvulling" @@ -7048,6 +7051,21 @@ msgstr "" "Gebruik slechts één wand op het vlakke bovenvlak, om meer ruimte te geven " "aan het bovenste invulpatroon" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Only one wall on first layer" @@ -7073,12 +7091,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Dit is de snelheid voor bruggen en 100% overhangende wanden." msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Rand breedte" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 6ee9ace2d7..d4a46b9e4f 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: 2023-08-08 15:05+0300\n" "Last-Translator: Ilya \n" "Language-Team: SPb 3D Printing\n" @@ -5430,6 +5430,12 @@ msgstr "" "в процентах от ширины линии. 0 скорость означает отсутствие замедления для " "диапазона степеней нависаний и используется скорость печати периметров" +msgid "Bridge" +msgstr "Мост" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Скорость перемещения" @@ -6431,9 +6437,6 @@ msgstr "Верхний слой" msgid "Bottom surface" msgstr "Нижняя поверхность" -msgid "Bridge" -msgstr "Мост" - msgid "Gap infill" msgstr "Заполнение пробелов" @@ -7048,6 +7051,21 @@ msgstr "" "Использовать только один периметр на плоской верхней поверхности, чтобы " "предоставить больше места для верхнего массива заполнения" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Только один периметр на первом слое" @@ -7074,12 +7092,23 @@ msgstr "" msgid "mm/s or %" msgstr "мм/с или %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Скорость моста и полностью свисающий периметр" msgid "mm/s" msgstr "мм/с" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Ширина каймы" diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index de87cb5c22..95f78310bf 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5337,6 +5337,12 @@ msgstr "" "uttrycks som en procent av linjebredden. Hastigheten 0 betyder att den inte " "minskar för överhängs gradernas område och hastigheten för väggarna används" +msgid "Bridge" +msgstr "Bridge/bro" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Förflyttnings hastighet" @@ -6324,9 +6330,6 @@ msgstr "Topp yta" msgid "Bottom surface" msgstr "Botten yta" -msgid "Bridge" -msgstr "Bridge/bro" - msgid "Gap infill" msgstr "Mellanrums ifyllnad" @@ -6913,6 +6916,21 @@ msgstr "" "Använd endast en vägg på topp ytan, för att ge mer utrymme till det övre " "ifyllningsmönstret" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Endast en vägg på första lagret" @@ -6937,12 +6955,23 @@ msgstr "" msgid "mm/s or %" msgstr "" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Hastighet för bridges/bryggor och hela överhängs väggar" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Brim bredd" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 6ab8940269..eada2a8f1c 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: 2023-07-27 23:15+0300\n" "Last-Translator: \n" "Language-Team: \n" @@ -5412,6 +5412,12 @@ msgstr "" "відсотках від ширини лінії. 0 швидкість означає відсутність уповільнення для " "діапазону ступенів звису і використовується швидкість друку периметрів" +msgid "Bridge" +msgstr "Міст" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "Швидкість переміщення" @@ -6409,9 +6415,6 @@ msgstr "Верхній шар" msgid "Bottom surface" msgstr "Нижня поверхня" -msgid "Bridge" -msgstr "Міст" - msgid "Gap infill" msgstr "Заповнення пропусків" @@ -7021,6 +7024,21 @@ msgstr "" "Використовуйте лише один периметр на плоскій верхній поверхні, щоб надати " "більше місця для верхнього масиву заповнення" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "Тільки один периметр на першому шарі" @@ -7047,12 +7065,23 @@ msgstr "" msgid "mm/s or %" msgstr "мм/с або %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "Швидкість мосту і периметр, що повністю звисає" msgid "mm/s" msgstr "mm/с" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Ширина кайми" diff --git a/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po b/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po index ee0f7b282c..12e066f67b 100644 --- a/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-09 14:06+0800\n" +"POT-Creation-Date: 2023-08-10 20:42+0800\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -5165,6 +5165,12 @@ msgstr "" "不同悬垂程度的打印速度。悬垂程度使用相对于线宽的百分表示。速度为0代表这个悬垂" "程度范围内不降速，直接使用墙的速度" +msgid "Bridge" +msgstr "桥接" + +msgid "Set speed for external and internal bridges" +msgstr "" + msgid "Travel speed" msgstr "空驶速度" @@ -6104,9 +6110,6 @@ msgstr "顶面" msgid "Bottom surface" msgstr "底面" -msgid "Bridge" -msgstr "桥接" - msgid "Gap infill" msgstr "填缝" @@ -6639,6 +6642,21 @@ msgid "" "pattern" msgstr "顶面只使用单层墙，从而更多的空间能够使用顶部填充图案" +msgid "One wall threshold" +msgstr "" + +#, c-format, boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created is you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + msgid "Only one wall on first layer" msgstr "首层仅单层墙" @@ -6662,12 +6680,23 @@ msgstr "打开这个选项将降低不同悬垂程度的走线的打印速度" msgid "mm/s or %" msgstr "mm/s 或 %" +msgid "External" +msgstr "" + msgid "Speed of bridge and completely overhang wall" msgstr "桥接和完全悬空的外墙的打印速度" msgid "mm/s" msgstr "mm/s" +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + msgid "Brim width" msgstr "Brim宽度"