diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 017470de67..0b303db46f 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -80,8 +80,8 @@ "sub_path": "process/0.20mm Standard @BBL X1C.json" }, { - "name":"0.20mm Strength @BBL X1C", - "sub_path":"process/0.20mm Strength @BBL X1C.json" + "name": "0.20mm Strength @BBL X1C", + "sub_path": "process/0.20mm Strength @BBL X1C.json" }, { "name": "0.24mm Draft @BBL X1C", @@ -112,44 +112,44 @@ "sub_path": "process/0.40mm Standard @BBL X1 0.8 nozzle.json" }, { - "name":"0.10mm Standard @BBL P1P 0.2 nozzle", - "sub_path":"process/0.10mm Standard @BBL P1P 0.2 nozzle.json" + "name": "0.10mm Standard @BBL P1P 0.2 nozzle", + "sub_path": "process/0.10mm Standard @BBL P1P 0.2 nozzle.json" }, { - "name":"0.20mm Standard @BBL P1P", - "sub_path":"process/0.20mm Standard @BBL P1P.json" + "name": "0.20mm Standard @BBL P1P", + "sub_path": "process/0.20mm Standard @BBL P1P.json" }, { - "name":"0.30mm Standard @BBL P1P 0.6 nozzle", - "sub_path":"process/0.30mm Standard @BBL P1P 0.6 nozzle.json" + "name": "0.30mm Standard @BBL P1P 0.6 nozzle", + "sub_path": "process/0.30mm Standard @BBL P1P 0.6 nozzle.json" }, { - "name":"0.08mm Extra Fine @BBL P1P", - "sub_path":"process/0.08mm Extra Fine @BBL P1P.json" + "name": "0.08mm Extra Fine @BBL P1P", + "sub_path": "process/0.08mm Extra Fine @BBL P1P.json" }, { - "name":"0.12mm Fine @BBL P1P", - "sub_path":"process/0.12mm Fine @BBL P1P.json" + "name": "0.12mm Fine @BBL P1P", + "sub_path": "process/0.12mm Fine @BBL P1P.json" }, { - "name":"0.16mm Optimal @BBL P1P", - "sub_path":"process/0.16mm Optimal @BBL P1P.json" + "name": "0.16mm Optimal @BBL P1P", + "sub_path": "process/0.16mm Optimal @BBL P1P.json" }, { - "name":"0.20mm Strength @BBL P1P", - "sub_path":"process/0.20mm Strength @BBL P1P.json" + "name": "0.20mm Strength @BBL P1P", + "sub_path": "process/0.20mm Strength @BBL P1P.json" }, { - "name":"0.24mm Draft @BBL P1P", - "sub_path":"process/0.24mm Draft @BBL P1P.json" + "name": "0.24mm Draft @BBL P1P", + "sub_path": "process/0.24mm Draft @BBL P1P.json" }, { - "name":"0.28mm Extra Draft @BBL P1P", - "sub_path":"process/0.28mm Extra Draft @BBL P1P.json" + "name": "0.28mm Extra Draft @BBL P1P", + "sub_path": "process/0.28mm Extra Draft @BBL P1P.json" }, { - "name":"0.40mm Standard @BBL P1P 0.8 nozzle", - "sub_path":"process/0.40mm Standard @BBL P1P 0.8 nozzle.json" + "name": "0.40mm Standard @BBL P1P 0.8 nozzle", + "sub_path": "process/0.40mm Standard @BBL P1P 0.8 nozzle.json" }, { "name": "fdm_process_bbl_0.06_nozzle_0.2", @@ -248,8 +248,8 @@ "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json" }, { - "name":"0.30mm Strength @BBL X1C 0.6 nozzle", - "sub_path":"process/0.30mm Strength @BBL X1C 0.6 nozzle.json" + "name": "0.30mm Strength @BBL X1C 0.6 nozzle", + "sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json" } ], "filament_list": [ @@ -654,44 +654,44 @@ "sub_path": "filament/PolyLite PLA @BBL X1C 0.2 nozzle.json" }, { - "name":"Bambu Support G @BBL P1P", - "sub_path":"filament/P1P/Bambu Support G @BBL P1P.json" + "name": "Bambu Support G @BBL P1P", + "sub_path": "filament/P1P/Bambu Support G @BBL P1P.json" }, { "name": "Bambu ABS @BBL P1P 0.2 nozzle", "sub_path": "filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu PLA Matte @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json" + "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu PLA Matte @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA Matte @BBL P1P.json" + "name": "Bambu PLA Matte @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P.json" }, { - "name":"Bambu PLA Basic @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json" + "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu PLA Basic @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA Basic @BBL P1P.json" + "name": "Bambu PLA Basic @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P.json" }, { - "name":"Bambu PLA Tough @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json" + "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu PLA Tough @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA Tough @BBL P1P.json" + "name": "Bambu PLA Tough @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P.json" }, { - "name":"Bambu PLA Marble @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA Marble @BBL P1P.json" + "name": "Bambu PLA Marble @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Marble @BBL P1P.json" }, { - "name":"Bambu PLA Sparkle @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA Sparkle @BBL P1P.json" + "name": "Bambu PLA Sparkle @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Sparkle @BBL P1P.json" }, { "name": "Bambu ABS @BBL P1P", @@ -710,24 +710,24 @@ "sub_path": "filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu TPU 95A @BBL P1P", - "sub_path":"filament/P1P/Bambu TPU 95A @BBL P1P.json" + "name": "Bambu TPU 95A @BBL P1P", + "sub_path": "filament/P1P/Bambu TPU 95A @BBL P1P.json" }, { "name": "Bambu Support W @BBL P1P", "sub_path": "filament/P1P/Bambu Support W @BBL P1P.json" }, { - "name":"Generic PLA @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json" + "name": "Generic PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json" }, { - "name":"Generic PLA @BBL P1P", - "sub_path":"filament/P1P/Generic PLA @BBL P1P.json" + "name": "Generic PLA @BBL P1P", + "sub_path": "filament/P1P/Generic PLA @BBL P1P.json" }, { - "name":"Generic PLA Silk @BBL P1P", - "sub_path":"filament/P1P/Generic PLA Silk @BBL P1P.json" + "name": "Generic PLA Silk @BBL P1P", + "sub_path": "filament/P1P/Generic PLA Silk @BBL P1P.json" }, { "name": "Generic ABS @BBL P1P 0.2 nozzle", @@ -754,112 +754,112 @@ "sub_path": "filament/P1P/Generic PC @BBL P1P.json" }, { - "name":"Generic PETG @0.2 nozzle", - "sub_path":"filament/Generic PETG @0.2 nozzle.json" + "name": "Generic PETG @0.2 nozzle", + "sub_path": "filament/Generic PETG @0.2 nozzle.json" }, { - "name":"Bambu PLA Metal @BBL X1C 0.2 nozzle", - "sub_path":"filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json" + "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json" }, { - "name":"Bambu PLA Metal @BBL X1", - "sub_path":"filament/Bambu PLA Metal @BBL X1.json" + "name": "Bambu PLA Metal @BBL X1", + "sub_path": "filament/Bambu PLA Metal @BBL X1.json" }, { - "name":"Bambu PLA Metal @BBL X1C", - "sub_path":"filament/Bambu PLA Metal @BBL X1C.json" + "name": "Bambu PLA Metal @BBL X1C", + "sub_path": "filament/Bambu PLA Metal @BBL X1C.json" }, { - "name":"Bambu PLA-CF @base", - "sub_path":"filament/Bambu PLA-CF @base.json" + "name": "Bambu PLA-CF @base", + "sub_path": "filament/Bambu PLA-CF @base.json" }, { - "name":"Bambu PLA-CF @BBL X1C 0.8 nozzle", - "sub_path":"filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json" + "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json" }, { - "name":"Bambu PLA-CF @BBL X1C", - "sub_path":"filament/Bambu PLA-CF @BBL X1C.json" + "name": "Bambu PLA-CF @BBL X1C", + "sub_path": "filament/Bambu PLA-CF @BBL X1C.json" }, { - "name":"Bambu PAHT-CF @base", - "sub_path":"filament/Bambu PAHT-CF @base.json" + "name": "Bambu PAHT-CF @base", + "sub_path": "filament/Bambu PAHT-CF @base.json" }, { - "name":"Bambu PAHT-CF @BBL X1C", - "sub_path":"filament/Bambu PAHT-CF @BBL X1C.json" + "name": "Bambu PAHT-CF @BBL X1C", + "sub_path": "filament/Bambu PAHT-CF @BBL X1C.json" }, { "name": "Generic PETG @BBL P1P", "sub_path": "filament/P1P/Generic PETG @BBL P1P.json" }, { - "name":"Generic PVA @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json" + "name": "Generic PVA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json" }, { - "name":"Generic PVA @BBL P1P", - "sub_path":"filament/P1P/Generic PVA @BBL P1P.json" + "name": "Generic PVA @BBL P1P", + "sub_path": "filament/P1P/Generic PVA @BBL P1P.json" }, { - "name":"Generic TPU @BBL P1P", - "sub_path":"filament/P1P/Generic TPU @BBL P1P.json" + "name": "Generic TPU @BBL P1P", + "sub_path": "filament/P1P/Generic TPU @BBL P1P.json" }, { - "name":"PolyLite PLA @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json" + "name": "PolyLite PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json" }, { - "name":"PolyLite PLA @BBL P1P", - "sub_path":"filament/P1P/PolyLite PLA @BBL P1P.json" + "name": "PolyLite PLA @BBL P1P", + "sub_path": "filament/P1P/PolyLite PLA @BBL P1P.json" }, { - "name":"PolyTerra PLA @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json" + "name": "PolyTerra PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json" }, { - "name":"PolyTerra PLA @BBL P1P", - "sub_path":"filament/P1P/PolyTerra PLA @BBL P1P.json" + "name": "PolyTerra PLA @BBL P1P", + "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P.json" }, { - "name":"Bambu PA-CF @BBL P1P", - "sub_path":"filament/P1P/Bambu PA-CF @BBL P1P.json" + "name": "Bambu PA-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PA-CF @BBL P1P.json" }, { - "name":"Generic PA-CF @BBL P1P", - "sub_path":"filament/P1P/Generic PA-CF @BBL P1P.json" + "name": "Generic PA-CF @BBL P1P", + "sub_path": "filament/P1P/Generic PA-CF @BBL P1P.json" }, { - "name":"Generic PA @BBL P1P", - "sub_path":"filament/P1P/Generic PA @BBL P1P.json" + "name": "Generic PA @BBL P1P", + "sub_path": "filament/P1P/Generic PA @BBL P1P.json" }, { - "name":"Generic PETG @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json" + "name": "Generic PETG @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu PAHT-CF @BBL P1P", - "sub_path":"filament/P1P/Bambu PAHT-CF @BBL P1P.json" + "name": "Bambu PAHT-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PAHT-CF @BBL P1P.json" }, { - "name":"Bambu PLA Metal @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json" + "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu PLA Metal @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA Metal @BBL P1P.json" + "name": "Bambu PLA Metal @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P.json" }, { - "name":"Bambu PLA-CF @BBL P1P", - "sub_path":"filament/P1P/Bambu PLA-CF @BBL P1P.json" + "name": "Bambu PLA-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P.json" }, { - "name":"Generic PLA-CF @BBL P1P", - "sub_path":"filament/P1P/Generic PLA-CF @BBL P1P.json" + "name": "Generic PLA-CF @BBL P1P", + "sub_path": "filament/P1P/Generic PLA-CF @BBL P1P.json" }, { - "name":"Bambu PLA-CF @BBL P1P 0.8 nozzle", - "sub_path":"filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json" + "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", + "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json" }, { "name": "Bambu PET-CF @BBL X1C", @@ -870,36 +870,36 @@ "sub_path": "filament/P1P/Bambu PET-CF @BBL P1P.json" }, { - "name":"Bambu Support For PLA @base", - "sub_path":"filament/Bambu Support For PLA @base.json" + "name": "Bambu Support For PLA @base", + "sub_path": "filament/Bambu Support For PLA @base.json" }, { - "name":"Bambu Support For PLA @BBL X1C 0.2 nozzle", - "sub_path":"filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json" + "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json" }, { - "name":"Bambu Support For PLA @BBL X1C", - "sub_path":"filament/Bambu Support For PLA @BBL X1C.json" + "name": "Bambu Support For PLA @BBL X1C", + "sub_path": "filament/Bambu Support For PLA @BBL X1C.json" }, { - "name":"Bambu Support For PLA @BBL P1P 0.2 nozzle", - "sub_path":"filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json" + "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json" }, { - "name":"Bambu Support For PLA @BBL P1P", - "sub_path":"filament/P1P/Bambu Support For PLA @BBL P1P.json" + "name": "Bambu Support For PLA @BBL P1P", + "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P.json" }, { - "name":"Bambu Support For PA/PET @base", - "sub_path":"filament/Bambu Support For PA PET @base.json" + "name": "Bambu Support For PA/PET @base", + "sub_path": "filament/Bambu Support For PA PET @base.json" }, { - "name":"Bambu Support For PA/PET @BBL P1P", - "sub_path":"filament/P1P/Bambu Support For PA PET @BBL P1P.json" + "name": "Bambu Support For PA/PET @BBL P1P", + "sub_path": "filament/P1P/Bambu Support For PA PET @BBL P1P.json" }, { - "name":"Bambu Support For PA/PET @BBL X1C", - "sub_path":"filament/Bambu Support For PA PET @BBL X1C.json" + "name": "Bambu Support For PA/PET @BBL X1C", + "sub_path": "filament/Bambu Support For PA PET @BBL X1C.json" } ], "machine_list": [ @@ -960,4 +960,4 @@ "sub_path": "machine/Bambu Lab P1P 0.8 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json index 61f915fcd3..f0114486c3 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json index c3230932b0..20e4a03425 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json @@ -15,7 +15,7 @@ "10" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json index fdaaec3bf2..eb45946bef 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json @@ -9,9 +9,9 @@ "22" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json index f32991617c..0117852594 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS @base.json @@ -14,4 +14,4 @@ "filament_vendor": [ "Bambu Lab" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json index 7c2f2e15dc..20a8fb0469 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json @@ -5,33 +5,30 @@ "from": "system", "instantiation": "true", "inherits": "Bambu PA-CF @base", - "filament_max_volumetric_speed": [ - "8" - ], "nozzle_temperature_initial_layer": [ - "290" + "290" ], "nozzle_temperature": [ - "290" + "290" ], "fan_max_speed": [ - "30" + "30" ], "fan_min_speed": [ - "10" + "10" ], "fan_cooling_layer_time": [ - "5" + "5" ], "full_fan_speed_layer": [ - "2" + "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json index 894ebb411e..7d34ca5072 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json @@ -5,9 +5,6 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_pa", - "required_nozzle_HRC": [ - "40" - ], "filament_vendor": [ "Bambu Lab" ], @@ -35,4 +32,4 @@ "nozzle_temperature": [ "280" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json index 78d7c29370..1d226fc1a1 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Bambu PAHT-CF @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json index 5f0e6cfecf..67182ecc5c 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json @@ -5,23 +5,17 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_pa", - "filament_max_volumetric_speed": [ - "8" - ], "fan_max_speed": [ - "30" + "30" ], "fan_min_speed": [ - "10" + "10" ], "fan_cooling_layer_time": [ - "5" + "5" ], "full_fan_speed_layer": [ - "2" - ], - "required_nozzle_HRC": [ - "40" + "2" ], "filament_vendor": [ "Bambu Lab" @@ -32,9 +26,6 @@ "filament_flow_ratio": [ "0.96" ], - "nozzle_temperature_initial_layer": [ - "290" - ], "overhang_fan_threshold": [ "0%" ], @@ -49,8 +40,5 @@ ], "temperature_vitrification": [ "180" - ], - "nozzle_temperature": [ - "290" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json index f024e4cab5..6afdd4352b 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json @@ -12,7 +12,7 @@ "260" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json index d770c69d27..360b0465b9 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json @@ -9,7 +9,7 @@ "260" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json index 141a95002c..f067ceab0a 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json @@ -9,7 +9,7 @@ "260" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json index fd464679c7..047a71fe82 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json @@ -6,7 +6,7 @@ "instantiation": "true", "inherits": "Bambu PC @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @base.json b/resources/profiles/BBL/filament/Bambu PC @base.json index 7bbcbbd30a..a9038a4b92 100644 --- a/resources/profiles/BBL/filament/Bambu PC @base.json +++ b/resources/profiles/BBL/filament/Bambu PC @base.json @@ -14,4 +14,4 @@ "filament_flow_ratio": [ "0.94" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json index d44d01115d..a6985f95a3 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json @@ -5,24 +5,18 @@ "from": "system", "instantiation": "true", "inherits": "Bambu PET-CF @base", - "slow_down_for_layer_cooling": [ - "1" - ], "reduce_fan_stop_start_freq": [ "0" ], "slow_down_min_speed": [ "20" ], - "slow_down_layer_time": [ - "2" - ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json index 325f991443..04c6947b51 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json @@ -29,28 +29,28 @@ "fan_cooling_layer_time": [ "5" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "80" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "100" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "80" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "100" ], "required_nozzle_HRC": [ @@ -80,4 +80,4 @@ "nozzle_temperature": [ "270" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json index 7805e7125d..5b6d8dc952 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json @@ -1,16 +1,16 @@ { - "type": "filament", - "setting_id": "GFSG00_00", - "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PETG Basic @base", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSG00_00", + "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PETG Basic @base", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json index 02590dc33d..632793d241 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json @@ -1,25 +1,25 @@ { - "type": "filament", - "setting_id": "GFSG00_02", - "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PETG Basic @base", - "filament_max_volumetric_speed": [ - "16" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSG00_02", + "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PETG Basic @base", + "filament_max_volumetric_speed": [ + "16" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json index a7b23cc1fa..9c46de0c41 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json @@ -1,16 +1,16 @@ { - "type": "filament", - "setting_id": "GFSG00_01", - "name": "Bambu PETG Basic @BBL X1C", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PETG Basic @base", - "filament_max_volumetric_speed": [ - "14" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSG00_01", + "name": "Bambu PETG Basic @BBL X1C", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PETG Basic @base", + "filament_max_volumetric_speed": [ + "14" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json index c306561a38..9c9da0703e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json @@ -1,86 +1,71 @@ { - "type": "filament", - "filament_id": "GFG00", - "name": "Bambu PETG Basic @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pet", - "filament_flow_ratio": [ - "0.95" - ], - "temperature_vitrification": [ - "70" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "10" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "slow_down_layer_time": [ - "8" - ], - "fan_cooling_layer_time": [ - "30" - ], - "cool_plate_temp" : [ - "0" - ], - "eng_plate_temp" : [ - "70" - ], - "hot_plate_temp" : [ - "70" - ], - "textured_plate_temp" : [ - "70" - ], - "cool_plate_temp_initial_layer" : [ - "0" - ], - "eng_plate_temp_initial_layer" : [ - "70" - ], - "hot_plate_temp_initial_layer" : [ - "70" - ], - "textured_plate_temp_initial_layer" : [ - "70" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_type": [ - "PETG" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.25" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature": [ - "255" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" - ] -} + "type": "filament", + "filament_id": "GFG00", + "name": "Bambu PETG Basic @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pet", + "filament_flow_ratio": [ + "0.95" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "fan_cooling_layer_time": [ + "30" + ], + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.25" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json index 7a0a106668..052c01c00b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json @@ -1,16 +1,16 @@ { - "type": "filament", - "setting_id": "GFSG50_01", - "name": "Bambu PETG-CF @BBL X1C", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PETG-CF @base", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "type": "filament", + "setting_id": "GFSG50_01", + "name": "Bambu PETG-CF @BBL X1C", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PETG-CF @base", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json index f6e26c2edb..4616ce2d06 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json @@ -1,86 +1,77 @@ { - "type": "filament", - "filament_id": "GFG50", - "name": "Bambu PETG-CF @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pet", - "filament_flow_ratio": [ - "0.95" - ], - "temperature_vitrification": [ - "75" - ], - "overhang_fan_threshold": [ - "25%" - ], - "overhang_fan_speed": [ - "90" - ], - "cool_plate_temp" : [ - "0" - ], - "eng_plate_temp" : [ - "70" - ], - "hot_plate_temp" : [ - "70" - ], - "textured_plate_temp" : [ - "70" - ], - "cool_plate_temp_initial_layer" : [ - "0" - ], - "eng_plate_temp_initial_layer" : [ - "70" - ], - "hot_plate_temp_initial_layer" : [ - "70" - ], - "textured_plate_temp_initial_layer" : [ - "70" - ], - "required_nozzle_HRC": [ - "40" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_type": [ - "PETG-CF" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature": [ - "255" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.25" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "slow_down_layer_time": [ - "6" - ], - "fan_cooling_layer_time": [ - "20" - ] -} + "type": "filament", + "filament_id": "GFG50", + "name": "Bambu PETG-CF @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pet", + "filament_flow_ratio": [ + "0.95" + ], + "temperature_vitrification": [ + "75" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "90" + ], + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "required_nozzle_HRC": [ + "40" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_type": [ + "PETG-CF" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json index 37cbb87b17..45684a3ffa 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json @@ -16,4 +16,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json index 8ae3cd52f4..18cd35515a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json index aca84b0d7a..38faedf717 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json @@ -8,10 +8,7 @@ "filament_max_volumetric_speed": [ "21" ], - "slow_down_min_speed": [ - "20" - ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json index 1e323ba2e4..f3805cc418 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json @@ -9,7 +9,7 @@ "21" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json index 5f936cec7f..279b719b9b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json @@ -17,4 +17,4 @@ "filament_density": [ "1.26" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Impact @base.json b/resources/profiles/BBL/filament/Bambu PLA Impact @base.json index 8c7bd99ee5..cf7f860a53 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Impact @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Impact @base.json @@ -11,10 +11,7 @@ "filament_cost": [ "25.4" ], - "filament_density": [ - "1.24" - ], "filament_flow_ratio": [ "0.95" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json index cdff3abb3b..795f60b2a4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json @@ -9,8 +9,8 @@ "8" ], "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json index 32c6616433..73f924b854 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json @@ -6,8 +6,8 @@ "instantiation": "true", "inherits": "Bambu PLA Marble @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json index 1d54c0a6af..5af790fc72 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json @@ -16,8 +16,5 @@ ], "filament_flow_ratio": [ "0.98" - ], - "filament_max_volumetric_speed": [ - "12" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json index e775f0acf7..e180056e6d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json @@ -16,4 +16,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json index 66b6e3b000..9a3d75e313 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json index 7d46ab5456..6d40ddbad1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json @@ -8,10 +8,7 @@ "filament_max_volumetric_speed": [ "22" ], - "slow_down_min_speed": [ - "20" - ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json index 5c560c3380..6d1d4dd148 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json @@ -9,7 +9,7 @@ "22" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json index af1d3e1f21..5cce3e912a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json @@ -17,4 +17,4 @@ "filament_flow_ratio": [ "0.98" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json index 93217b3f81..389813b431 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json @@ -16,4 +16,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json index e68814b8eb..be628909be 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json index b21c661b22..05298e0276 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Bambu PLA Metal @base", "filament_max_volumetric_speed": [ - "21" + "21" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json index c456f963a0..a3be127d32 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json @@ -17,4 +17,4 @@ "filament_density": [ "1.25" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json index 47e74d129a..388cea4614 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json @@ -1,19 +1,16 @@ { - "type": "filament", - "setting_id": "GFSA05_02", - "name": "Bambu PLA Silk @BBL X1", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PLA Silk @base", - "filament_max_volumetric_speed": [ - "12" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "type": "filament", + "setting_id": "GFSA05_02", + "name": "Bambu PLA Silk @BBL X1", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PLA Silk @base", + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json index 4a79c4245f..3125bb6f01 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json @@ -1,15 +1,15 @@ { - "type": "filament", - "setting_id": "GFSA05_00", - "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PLA Silk @base", - "filament_max_volumetric_speed": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" - ] + "type": "filament", + "setting_id": "GFSA05_00", + "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PLA Silk @base", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json index f1f4151e0e..a4631516cc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json @@ -1,16 +1,13 @@ { - "type": "filament", - "setting_id": "GFSA05_01", - "name": "Bambu PLA Silk @BBL X1C", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PLA Silk @base", - "filament_max_volumetric_speed": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" - ] + "type": "filament", + "setting_id": "GFSA05_01", + "name": "Bambu PLA Silk @BBL X1C", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PLA Silk @base", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json index 888799234a..5e53cd424d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json @@ -1,29 +1,26 @@ { - "type": "filament", - "filament_id": "GFA05", - "name": "Bambu PLA Silk @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], - "required_nozzle_HRC": [ - "3" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_density": [ - "1.32" - ], - "filament_cost": [ - "29.99" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature": [ - "230" - ] + "type": "filament", + "filament_id": "GFA05", + "name": "Bambu PLA Silk @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pla", + "filament_vendor": [ + "Bambu Lab" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_density": [ + "1.32" + ], + "filament_cost": [ + "29.99" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json index 074908ccc3..5a03b0bb69 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json @@ -9,8 +9,8 @@ "8" ], "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json index 39bcd798df..a2e5ee4182 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json @@ -6,8 +6,8 @@ "instantiation": "true", "inherits": "Bambu PLA Sparkle @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json index a79b3517e6..9b79037898 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json @@ -16,8 +16,5 @@ ], "filament_flow_ratio": [ "0.98" - ], - "filament_max_volumetric_speed": [ - "12" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json index e8cbe51c81..4ba18df635 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json @@ -16,4 +16,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json index 8621887cb4..84c6118f99 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json index f6068911d5..863ece5129 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json @@ -9,8 +9,8 @@ "21" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json index 9186f804cd..54d251da63 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json @@ -17,4 +17,4 @@ "filament_density": [ "1.26" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json index c7dfbb3d52..9faccbf884 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json @@ -9,15 +9,15 @@ "18" ], "nozzle_temperature_initial_layer": [ - "230" + "230" ], "nozzle_temperature": [ - "230" + "230" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json index a6cd2e53ae..4032b31142 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json @@ -9,13 +9,13 @@ "15" ], "nozzle_temperature_initial_layer": [ - "230" + "230" ], "nozzle_temperature": [ - "230" + "230" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json index 533e5d6117..6f45efb26b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json @@ -8,10 +8,10 @@ "filament_vendor": [ "Bambu Lab" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "45" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "45" ], "filament_cost": [ @@ -41,4 +41,4 @@ "filament_type": [ "PLA-CF" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json index bbf5d836ac..090e8de175 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Bambu Support For PA/PET @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json index 5ba24bd8d3..1c41f14c7f 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json @@ -29,7 +29,7 @@ "filament_cost": [ "34.99" ], - "slow_down_layer_time":[ + "slow_down_layer_time": [ "6" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json index 61cf0a8ab6..cc017cc03d 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Bambu Support For PLA @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json index 5a49fef271..f91af36f3c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json @@ -26,4 +26,4 @@ "slow_down_layer_time": [ "8" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json index 8733c225fa..f2c4ca4fc3 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Bambu Support G @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json index d79ea893df..bbc35bf607 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @base.json +++ b/resources/profiles/BBL/filament/Bambu Support G @base.json @@ -29,7 +29,7 @@ "filament_cost": [ "34.99" ], - "slow_down_layer_time":[ + "slow_down_layer_time": [ "6" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json index 530eae88ef..b631fe80c0 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json @@ -6,8 +6,8 @@ "instantiation": "true", "inherits": "Bambu Support W @base", "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json index 7dc4b4f9b7..9993c501b8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json @@ -6,8 +6,8 @@ "instantiation": "true", "inherits": "Bambu Support W @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json index 2f515c79b0..821b937556 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @base.json +++ b/resources/profiles/BBL/filament/Bambu Support W @base.json @@ -26,4 +26,4 @@ "slow_down_layer_time": [ "8" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json index b1a567d263..709e94f9bd 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json @@ -9,8 +9,8 @@ "3.6" ], "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json index 2ef09cab10..dad36754c7 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json @@ -9,8 +9,8 @@ "3.6" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json index 8de5fe9fde..507386fb56 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json @@ -20,4 +20,4 @@ "nozzle_temperature": [ "230" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json index 0fd366dced..ff01278197 100644 --- a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS.json b/resources/profiles/BBL/filament/Generic ABS.json index 256bc5674f..e05809f056 100644 --- a/resources/profiles/BBL/filament/Generic ABS.json +++ b/resources/profiles/BBL/filament/Generic ABS.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Generic ABS @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json index 18235191fa..1a355bf7d3 100644 --- a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json @@ -9,7 +9,7 @@ "2" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json index ac74598de7..10ed891833 100644 --- a/resources/profiles/BBL/filament/Generic ASA @base.json +++ b/resources/profiles/BBL/filament/Generic ASA @base.json @@ -11,4 +11,4 @@ "filament_max_volumetric_speed": [ "12" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA.json b/resources/profiles/BBL/filament/Generic ASA.json index b2187b615f..311076352a 100644 --- a/resources/profiles/BBL/filament/Generic ASA.json +++ b/resources/profiles/BBL/filament/Generic ASA.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Generic ASA @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json index 51ca84dff0..ef0e63c195 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF.json +++ b/resources/profiles/BBL/filament/Generic PA-CF.json @@ -7,34 +7,25 @@ "instantiation": "true", "inherits": "fdm_filament_pa", "filament_type": [ - "PA-CF" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature": [ - "290" - ], - "filament_max_volumetric_speed": [ - "8" + "PA-CF" ], "fan_max_speed": [ - "30" + "30" ], "fan_min_speed": [ - "10" + "10" ], "overhang_fan_threshold": [ - "0%" + "0%" ], "overhang_fan_speed": [ - "40" + "40" ], "fan_cooling_layer_time": [ - "5" + "5" ], "full_fan_speed_layer": [ - "2" + "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", @@ -44,4 +35,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json index f466c7d3cd..193c0e61ba 100644 --- a/resources/profiles/BBL/filament/Generic PA.json +++ b/resources/profiles/BBL/filament/Generic PA.json @@ -7,23 +7,23 @@ "instantiation": "true", "inherits": "fdm_filament_pa", "required_nozzle_HRC": [ - "3" + "3" ], "nozzle_temperature_initial_layer": [ - "280" + "280" ], "nozzle_temperature": [ - "280" + "280" ], "filament_max_volumetric_speed": [ - "16" + "16" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json index d9f3e5d76d..1563dd5c8a 100644 --- a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json @@ -9,7 +9,7 @@ "1" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json index dc053680d1..b51b608898 100644 --- a/resources/profiles/BBL/filament/Generic PC @base.json +++ b/resources/profiles/BBL/filament/Generic PC @base.json @@ -11,4 +11,4 @@ "filament_flow_ratio": [ "0.94" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC.json b/resources/profiles/BBL/filament/Generic PC.json index 1a322050c5..156ee20981 100644 --- a/resources/profiles/BBL/filament/Generic PC.json +++ b/resources/profiles/BBL/filament/Generic PC.json @@ -1,16 +1,16 @@ { - "type": "filament", - "setting_id": "GFSC99", - "name": "Generic PC", - "from": "system", - "instantiation": "true", - "inherits": "Generic PC @base", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "type": "filament", + "setting_id": "GFSC99", + "name": "Generic PC", + "from": "system", + "instantiation": "true", + "inherits": "Generic PC @base", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json index 609ae6b932..058dfa6f42 100644 --- a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json @@ -6,10 +6,10 @@ "instantiation": "true", "inherits": "Generic PETG @base", "filament_max_volumetric_speed": [ - "1" + "1" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @base.json b/resources/profiles/BBL/filament/Generic PETG @base.json index 98f25bdf71..4a7dd3e120 100644 --- a/resources/profiles/BBL/filament/Generic PETG @base.json +++ b/resources/profiles/BBL/filament/Generic PETG @base.json @@ -5,12 +5,6 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_pet", - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_for_layer_cooling": [ - "1" - ], "fan_cooling_layer_time": [ "30" ], @@ -29,9 +23,6 @@ "slow_down_min_speed": [ "20" ], - "slow_down_layer_time": [ - "8" - ], "filament_flow_ratio": [ "0.95" ], @@ -41,31 +32,31 @@ "nozzle_temperature_range_high": [ "270" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "70" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "70" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "70" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "70" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "70" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "70" ], "filament_start_gcode": [ " ; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json index af5dece0dc..ebfa065b87 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json @@ -1,16 +1,16 @@ { - "type": "filament", - "setting_id": "GFSG50", - "name": "Generic PETG-CF @BBL X1C", - "from": "system", - "instantiation": "true", - "inherits": "Generic PETG-CF @base", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "type": "filament", + "setting_id": "GFSG50", + "name": "Generic PETG-CF @BBL X1C", + "from": "system", + "instantiation": "true", + "inherits": "Generic PETG-CF @base", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json index 949c11f5e2..d66a3a700f 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json @@ -1,86 +1,77 @@ { - "type": "filament", - "filament_id": "GFG98", - "name": "Generic PETG-CF @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pet", - "filament_flow_ratio": [ - "0.95" - ], - "temperature_vitrification": [ - "75" - ], - "overhang_fan_threshold": [ - "25%" - ], - "overhang_fan_speed": [ - "90" - ], - "cool_plate_temp" : [ - "0" - ], - "eng_plate_temp" : [ - "70" - ], - "hot_plate_temp" : [ - "70" - ], - "textured_plate_temp" : [ - "70" - ], - "cool_plate_temp_initial_layer" : [ - "0" - ], - "eng_plate_temp_initial_layer" : [ - "70" - ], - "hot_plate_temp_initial_layer" : [ - "70" - ], - "textured_plate_temp_initial_layer" : [ - "70" - ], - "required_nozzle_HRC": [ - "40" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_type": [ - "PETG-CF" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature": [ - "255" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.25" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "slow_down_layer_time": [ - "6" - ], - "fan_cooling_layer_time": [ - "20" - ] -} + "type": "filament", + "filament_id": "GFG98", + "name": "Generic PETG-CF @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pet", + "filament_flow_ratio": [ + "0.95" + ], + "temperature_vitrification": [ + "75" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "90" + ], + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "required_nozzle_HRC": [ + "40" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_type": [ + "PETG-CF" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG.json b/resources/profiles/BBL/filament/Generic PETG.json index 6171ba8a84..0b1ff297b2 100644 --- a/resources/profiles/BBL/filament/Generic PETG.json +++ b/resources/profiles/BBL/filament/Generic PETG.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Generic PETG @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json index 0a7507380e..ab72bc9939 100644 --- a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json @@ -9,10 +9,10 @@ "2" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json index 43de916b4a..43e3ff2f6a 100644 --- a/resources/profiles/BBL/filament/Generic PLA @base.json +++ b/resources/profiles/BBL/filament/Generic PLA @base.json @@ -8,13 +8,10 @@ "filament_flow_ratio": [ "0.98" ], - "filament_max_volumetric_speed": [ - "12" - ], "slow_down_layer_time": [ "8" ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json index cf7e7b080a..23cbdf9c4c 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json @@ -1,20 +1,17 @@ { - "type": "filament", - "filament_id": "GFA05", - "name": "Generic PLA Silk @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pla", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" - ] -} + "type": "filament", + "filament_id": "GFA05", + "name": "Generic PLA Silk @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk.json b/resources/profiles/BBL/filament/Generic PLA Silk.json index b836780578..a9d007ce6b 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk.json @@ -12,11 +12,11 @@ "0.5" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json index aebf40321e..5adb591abd 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json @@ -1,44 +1,29 @@ { - "type": "filament", - "filament_id": "GFL98", - "name": "Generic PLA-CF @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pla", - "required_nozzle_HRC": [ - "40" - ], - "cool_plate_temp" : [ - "45" - ], - "cool_plate_temp_initial_layer" : [ - "45" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "slow_down_layer_time": [ - "7" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "temperature_vitrification": [ - "55" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" - ] -} + "type": "filament", + "filament_id": "GFL98", + "name": "Generic PLA-CF @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pla", + "required_nozzle_HRC": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_type": [ + "PLA-CF" + ], + "slow_down_layer_time": [ + "7" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF.json b/resources/profiles/BBL/filament/Generic PLA-CF.json index 4151ffcbc9..970d25f16b 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF.json @@ -12,5 +12,5 @@ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" - ] + ] } diff --git a/resources/profiles/BBL/filament/Generic PLA.json b/resources/profiles/BBL/filament/Generic PLA.json index 0546d2e84e..62660e9919 100644 --- a/resources/profiles/BBL/filament/Generic PLA.json +++ b/resources/profiles/BBL/filament/Generic PLA.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Generic PLA @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json index e309e458b8..aa3c484f76 100644 --- a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json @@ -9,7 +9,7 @@ "0.5" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json index cc7a2c9fa7..e472d0284c 100644 --- a/resources/profiles/BBL/filament/Generic PVA @base.json +++ b/resources/profiles/BBL/filament/Generic PVA @base.json @@ -17,4 +17,4 @@ "slow_down_min_speed": [ "20" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA.json b/resources/profiles/BBL/filament/Generic PVA.json index 961b77bf77..bb056167a3 100644 --- a/resources/profiles/BBL/filament/Generic PVA.json +++ b/resources/profiles/BBL/filament/Generic PVA.json @@ -6,11 +6,11 @@ "instantiation": "true", "inherits": "Generic PVA @base", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json index 5df255d936..3e7d274cb8 100644 --- a/resources/profiles/BBL/filament/Generic TPU.json +++ b/resources/profiles/BBL/filament/Generic TPU.json @@ -10,14 +10,14 @@ "3.2" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" ], "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json index f7603eeea9..a12c39b56c 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "2" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "100" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "100" ], "fan_max_speed": [ @@ -29,4 +29,4 @@ "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json index 9c585c9a6b..5b4be18b33 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json @@ -14,16 +14,16 @@ "reduce_fan_stop_start_freq": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "100" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "100" ], "compatible_printers": [ @@ -31,4 +31,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json index 1afbe432b6..13ceed98d4 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json @@ -5,30 +5,27 @@ "from": "system", "instantiation": "true", "inherits": "Bambu PA-CF @base", - "filament_max_volumetric_speed": [ - "8" - ], "nozzle_temperature_initial_layer": [ - "290" + "290" ], "nozzle_temperature": [ - "290" + "290" ], "fan_max_speed": [ - "30" + "30" ], "fan_min_speed": [ - "10" + "10" ], "fan_cooling_layer_time": [ - "5" + "5" ], "full_fan_speed_layer": [ - "2" + "2" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json index 7d988b5665..bc2295d4b6 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json @@ -10,4 +10,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json index 38d40953c0..b535c8d0ea 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json @@ -16,4 +16,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json index 649cda5ae0..068922bf6b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json @@ -1,25 +1,19 @@ { - "type": "filament", - "setting_id": "GFST01_10", - "name": "Bambu PET-CF @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PET-CF @base", - "slow_down_for_layer_cooling": [ - "1" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" -] -} + "type": "filament", + "setting_id": "GFST01_10", + "name": "Bambu PET-CF @BBL P1P", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PET-CF @base", + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json index bd49859717..6aa5b988bc 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json @@ -1,13 +1,13 @@ { - "type": "filament", - "setting_id": "GFSG50_11", - "name": "Bambu PETG-CF @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PETG-CF @base", - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSG50_11", + "name": "Bambu PETG-CF @BBL P1P", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PETG-CF @base", + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json index afce920b5a..488581d21f 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "2" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -27,6 +27,6 @@ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json index 11921d2b46..1b61b991b0 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json @@ -11,16 +11,16 @@ "slow_down_layer_time": [ "8" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -34,4 +34,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json index c4244d02d8..5abcc629e2 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json @@ -5,16 +5,16 @@ "from": "system", "instantiation": "true", "inherits": "Bambu PLA Marble @base", - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -27,8 +27,8 @@ "8" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json index 0196d2a6a9..f4f918dac7 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "2" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -29,4 +29,4 @@ "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json index aa3ac96dc4..095d4ebd97 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json @@ -11,16 +11,16 @@ "slow_down_layer_time": [ "8" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -34,4 +34,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json index 76b9e91b83..86655f6942 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "2" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -27,6 +27,6 @@ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json index 80918deaf9..1f4adeaf76 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json @@ -11,16 +11,16 @@ "slow_down_layer_time": [ "8" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -34,4 +34,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json index a2c70f94de..981cf85905 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json @@ -1,26 +1,26 @@ { - "type": "filament", - "setting_id": "GFSA05_11", - "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PLA Silk @base", - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp" : [ - "65" - ], - "hot_plate_temp_initial_layer" : [ - "65" - ], - "textured_plate_temp" : [ - "65" - ], - "textured_plate_temp_initial_layer" : [ - "65" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] + "type": "filament", + "setting_id": "GFSA05_11", + "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PLA Silk @base", + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json index 7e473c2f08..a0fb732d5e 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json @@ -1,31 +1,28 @@ { - "type": "filament", - "setting_id": "GFSA05_12", - "name": "Bambu PLA Silk @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "Bambu PLA Silk @base", - "filament_max_volumetric_speed": [ - "12" - ], - "slow_down_layer_time": [ - "8" - ], - "hot_plate_temp" : [ - "65" - ], - "hot_plate_temp_initial_layer" : [ - "65" - ], - "textured_plate_temp" : [ - "65" - ], - "textured_plate_temp_initial_layer" : [ - "65" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] + "type": "filament", + "setting_id": "GFSA05_12", + "name": "Bambu PLA Silk @BBL P1P", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PLA Silk @base", + "slow_down_layer_time": [ + "8" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json index 53189104d1..9a86021fed 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json @@ -5,16 +5,16 @@ "from": "system", "instantiation": "true", "inherits": "Bambu PLA Marble @base", - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -27,8 +27,8 @@ "8" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json index bfbc37a242..885a4aaeff 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "2" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -27,6 +27,6 @@ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json index c44e9e3d4a..210a049069 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json @@ -11,16 +11,16 @@ "slow_down_layer_time": [ "8" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -34,4 +34,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json index 370f48f5df..686af8659c 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "18" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -36,4 +36,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json index 18536780ed..9a67e3e639 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "15" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -35,4 +35,4 @@ "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json index e59d77e2dc..63a8fd739e 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json @@ -6,8 +6,8 @@ "instantiation": "true", "inherits": "Bambu Support For PA/PET @base", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json index 0b73e5f494..dfcea17db9 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json @@ -14,16 +14,16 @@ "nozzle_temperature": [ "240" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json index 19ebe7afc1..f8ca06c6e6 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json @@ -5,27 +5,27 @@ "from": "system", "instantiation": "true", "inherits": "Bambu Support For PLA @base", - "hot_plate_temp" : [ - "65" + "hot_plate_temp": [ + "65" ], - "hot_plate_temp_initial_layer" : [ - "65" + "hot_plate_temp_initial_layer": [ + "65" ], - "textured_plate_temp" : [ - "65" + "textured_plate_temp": [ + "65" ], - "textured_plate_temp_initial_layer" : [ - "65" + "textured_plate_temp_initial_layer": [ + "65" ], "fan_min_speed": [ - "50" + "50" ], "fan_cooling_layer_time": [ - "80" + "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json index ab03c12c37..aeed825b3a 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json @@ -6,8 +6,8 @@ "instantiation": "true", "inherits": "Bambu Support G @base", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json index 820a7da2af..19c2eccd0f 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json @@ -14,16 +14,16 @@ "nozzle_temperature": [ "240" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json index 01700c8440..a3e191bcf1 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json @@ -5,27 +5,27 @@ "from": "system", "instantiation": "true", "inherits": "Bambu Support W @base", - "hot_plate_temp" : [ - "65" + "hot_plate_temp": [ + "65" ], - "hot_plate_temp_initial_layer" : [ - "65" + "hot_plate_temp_initial_layer": [ + "65" ], - "textured_plate_temp" : [ - "65" + "textured_plate_temp": [ + "65" ], - "textured_plate_temp_initial_layer" : [ - "65" + "textured_plate_temp_initial_layer": [ + "65" ], "fan_min_speed": [ - "50" + "50" ], "fan_cooling_layer_time": [ - "80" + "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json index 85747f1d2e..cda492b5da 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json @@ -8,21 +8,21 @@ "filament_max_volumetric_speed": [ "3.6" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "45" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "45" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "45" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "45" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json index ae2447b030..0f8174fafd 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json @@ -14,19 +14,19 @@ "reduce_fan_stop_start_freq": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "100" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "100" ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json index 12c954002a..24b48a38f7 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json @@ -11,16 +11,16 @@ "reduce_fan_stop_start_freq": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "100" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "100" ], "compatible_printers": [ @@ -28,4 +28,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json index 9b74c093d0..2226507caf 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json @@ -8,19 +8,19 @@ "filament_max_volumetric_speed": [ "2" ], - "hot_plate_temp" : [ - "100" + "hot_plate_temp": [ + "100" ], - "hot_plate_temp_initial_layer" : [ - "100" + "hot_plate_temp_initial_layer": [ + "100" ], - "textured_plate_temp" : [ - "100" + "textured_plate_temp": [ + "100" ], - "textured_plate_temp_initial_layer" : [ - "100" + "textured_plate_temp_initial_layer": [ + "100" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json index 8802f7bdad..5797ed01e2 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json @@ -5,21 +5,21 @@ "from": "system", "instantiation": "true", "inherits": "Generic ASA @base", - "hot_plate_temp" : [ - "100" + "hot_plate_temp": [ + "100" ], - "hot_plate_temp_initial_layer" : [ - "100" + "hot_plate_temp_initial_layer": [ + "100" ], - "textured_plate_temp" : [ - "100" + "textured_plate_temp": [ + "100" ], - "textured_plate_temp_initial_layer" : [ - "100" + "textured_plate_temp_initial_layer": [ + "100" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json index a8fc99a311..9b2754cc66 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json @@ -1,26 +1,26 @@ { - "type": "filament", - "filament_id": "GFN99", - "setting_id": "GFSN98_10", - "name": "Generic PA @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pa", - "required_nozzle_HRC": [ - "3" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "nozzle_temperature": [ - "280" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" -] -} + "type": "filament", + "filament_id": "GFN99", + "setting_id": "GFSN98_10", + "name": "Generic PA @BBL P1P", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pa", + "required_nozzle_HRC": [ + "3" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature": [ + "280" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json index 7d084b2c25..6970fa4bf1 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json @@ -7,22 +7,13 @@ "instantiation": "true", "inherits": "fdm_filament_pa", "filament_type": [ - "PA-CF" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature": [ - "290" - ], - "filament_max_volumetric_speed": [ - "8" + "PA-CF" ], "fan_max_speed": [ - "30" + "30" ], "fan_min_speed": [ - "10" + "10" ], "overhang_fan_threshold": [ "0%" @@ -31,7 +22,7 @@ "40" ], "fan_cooling_layer_time": [ - "5" + "5" ], "full_fan_speed_layer": [ "2" @@ -41,4 +32,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json index 413af620b8..8bfba92151 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json @@ -16,4 +16,4 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" ] - } \ No newline at end of file +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json index d2e0801e06..f1ffc06718 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json @@ -1,26 +1,26 @@ { - "type": "filament", - "setting_id": "GFSG99_11", - "name": "Generic PETG @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "Generic PETG @base", - "hot_plate_temp" : [ - "80" - ], - "hot_plate_temp_initial_layer" : [ - "80" - ], - "textured_plate_temp" : [ - "80" - ], - "textured_plate_temp_initial_layer" : [ - "80" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSG99_11", + "name": "Generic PETG @BBL P1P 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Generic PETG @base", + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json index cbae651f8a..020f98de97 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json @@ -5,21 +5,21 @@ "from": "system", "instantiation": "true", "inherits": "Generic PETG @base", - "hot_plate_temp" : [ + "hot_plate_temp": [ "80" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "80" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "80" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json index 46ccf78a18..e5ff5b8e87 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json @@ -1,13 +1,13 @@ { - "type": "filament", - "setting_id": "GFSG50_10", - "name": "Generic PETG-CF @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "Generic PETG-CF @base", - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSG50_10", + "name": "Generic PETG-CF @BBL P1P", + "from": "system", + "instantiation": "true", + "inherits": "Generic PETG-CF @base", + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json index b6f3fef0a7..2d801bd309 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json @@ -9,18 +9,18 @@ "2" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -30,6 +30,6 @@ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json index 8f5ecefc3f..e94b51e711 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json @@ -5,16 +5,16 @@ "from": "system", "instantiation": "true", "inherits": "Generic PLA @base", - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -24,8 +24,8 @@ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json index 3654126f28..bf471473cb 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json @@ -12,8 +12,8 @@ "0.5" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json index 7f8bffb761..920616976f 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json @@ -1,25 +1,25 @@ { - "type": "filament", - "setting_id": "GFSL98_10", - "name": "Generic PLA-CF @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "Generic PLA-CF @base", - "hot_plate_temp" : [ - "65" - ], - "hot_plate_temp_initial_layer" : [ - "65" - ], - "textured_plate_temp" : [ - "65" - ], - "textured_plate_temp_initial_layer" : [ - "65" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "setting_id": "GFSL98_10", + "name": "Generic PLA-CF @BBL P1P", + "from": "system", + "instantiation": "true", + "inherits": "Generic PLA-CF @base", + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json index dab75dd701..430fc457fb 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json @@ -8,19 +8,19 @@ "filament_max_volumetric_speed": [ "0.5" ], - "hot_plate_temp" : [ - "65" + "hot_plate_temp": [ + "65" ], - "hot_plate_temp_initial_layer" : [ - "65" + "hot_plate_temp_initial_layer": [ + "65" ], - "textured_plate_temp" : [ - "65" + "textured_plate_temp": [ + "65" ], - "textured_plate_temp_initial_layer" : [ - "65" + "textured_plate_temp_initial_layer": [ + "65" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json index 8bedcc72cb..d0a5b8642b 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json @@ -5,27 +5,27 @@ "from": "system", "instantiation": "true", "inherits": "Generic PVA @base", - "textured_plate_temp" : [ - "65" + "textured_plate_temp": [ + "65" ], - "textured_plate_temp_initial_layer" : [ - "65" + "textured_plate_temp_initial_layer": [ + "65" ], - "hot_plate_temp" : [ - "65" + "hot_plate_temp": [ + "65" ], - "hot_plate_temp_initial_layer" : [ - "65" + "hot_plate_temp_initial_layer": [ + "65" ], "fan_min_speed": [ - "50" + "50" ], "fan_cooling_layer_time": [ - "80" + "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json index c085a57d57..9771d54828 100644 --- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json @@ -10,23 +10,23 @@ "3.2" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "45" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "45" ], - "textured_plate_temp" : [ - "45" + "textured_plate_temp": [ + "45" ], - "textured_plate_temp_initial_layer" : [ - "45" + "textured_plate_temp_initial_layer": [ + "45" ], "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json index 0bc8d0e0c0..2da0dd181f 100644 --- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "1" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -27,6 +27,6 @@ "80" ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json index ced0f6fa41..df33c39ffe 100644 --- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json @@ -11,16 +11,16 @@ "slow_down_layer_time": [ "8" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -33,5 +33,5 @@ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" - ] -} + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json index 8c876821c4..0be3c67559 100644 --- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json @@ -8,16 +8,16 @@ "filament_max_volumetric_speed": [ "1" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -25,8 +25,8 @@ ], "fan_cooling_layer_time": [ "80" - ], + ], "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json index 8f5f4141a5..fec170b4d4 100644 --- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json @@ -11,16 +11,16 @@ "slow_down_layer_time": [ "8" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "65" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "65" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "65" ], "fan_min_speed": [ @@ -33,5 +33,5 @@ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" - ] -} + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json index b1854271e6..6b5561966c 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json @@ -15,5 +15,5 @@ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" - ] + ] } diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json index 9e3a86c788..1a5eae3e91 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "1" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json index cc3e5cd067..24639d0071 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json @@ -8,12 +8,9 @@ "filament_max_volumetric_speed": [ "15" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" - ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @base.json b/resources/profiles/BBL/filament/PolyLite PLA @base.json index 4a67c09316..f8914467ea 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @base.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @base.json @@ -11,10 +11,7 @@ "filament_cost": [ "25.4" ], - "filament_density": [ - "1.24" - ], "filament_flow_ratio": [ "0.95" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json index ff2b229b2f..19b82baf49 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json @@ -15,5 +15,5 @@ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" - ] + ] } diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json index 32d9d09fed..2db969f0f7 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json @@ -9,7 +9,7 @@ "1" ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json index 70d9cef54e..0aae00edca 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json @@ -8,12 +8,9 @@ "filament_max_volumetric_speed": [ "22" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" - ], "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @base.json b/resources/profiles/BBL/filament/PolyTerra PLA @base.json index 306401f647..16a29aa51d 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @base.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @base.json @@ -17,4 +17,4 @@ "filament_flow_ratio": [ "0.98" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json index 3714e43235..1828f96883 100644 --- a/resources/profiles/BBL/filament/fdm_filament_asa.json +++ b/resources/profiles/BBL/filament/fdm_filament_asa.json @@ -4,36 +4,30 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "90" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "90" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "90" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "90" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "90" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "90" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], "fan_cooling_layer_time": [ "35" ], @@ -70,9 +64,6 @@ "nozzle_temperature": [ "260" ], - "temperature_vitrification": [ - "100" - ], "nozzle_temperature_range_low": [ "240" ], @@ -85,4 +76,4 @@ "slow_down_layer_time": [ "3" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json index 646ec19711..89fe50f477 100644 --- a/resources/profiles/BBL/filament/fdm_filament_common.json +++ b/resources/profiles/BBL/filament/fdm_filament_common.json @@ -9,28 +9,28 @@ "required_nozzle_HRC": [ "3" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "60" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "60" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "60" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "60" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "60" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "60" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "60" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "60" ], "overhang_fan_threshold": [ @@ -144,4 +144,4 @@ "temperature_vitrification": [ "100" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json index 4abbc279a2..89d268af2e 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pa.json +++ b/resources/profiles/BBL/filament/fdm_filament_pa.json @@ -7,36 +7,30 @@ "required_nozzle_HRC": [ "40" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "100" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "100" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "100" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "100" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], "fan_cooling_layer_time": [ "4" ], @@ -55,9 +49,6 @@ "nozzle_temperature_initial_layer": [ "290" ], - "reduce_fan_stop_start_freq": [ - "0" - ], "fan_max_speed": [ "60" ], @@ -85,4 +76,4 @@ "slow_down_layer_time": [ "2" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json index 8342bf1168..477812e6d5 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pc.json +++ b/resources/profiles/BBL/filament/fdm_filament_pc.json @@ -4,36 +4,30 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "110" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "110" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "110" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "110" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "110" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "110" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], "fan_cooling_layer_time": [ "30" ], @@ -85,4 +79,4 @@ "slow_down_layer_time": [ "2" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json index c6f4fc2960..e71333f631 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pet.json +++ b/resources/profiles/BBL/filament/fdm_filament_pet.json @@ -4,36 +4,24 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ - "60" - ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "80" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "80" ], - "cool_plate_temp_initial_layer" : [ - "60" - ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "80" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "80" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], "fan_cooling_layer_time": [ "20" ], @@ -55,15 +43,9 @@ "reduce_fan_stop_start_freq": [ "1" ], - "fan_max_speed": [ - "100" - ], "fan_min_speed": [ "20" ], - "overhang_fan_speed": [ - "100" - ], "nozzle_temperature": [ "255" ], @@ -79,4 +61,4 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json index e02e18fd3b..4253f36169 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pva.json +++ b/resources/profiles/BBL/filament/fdm_filament_pva.json @@ -4,28 +4,28 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "cool_plate_temp": [ "45" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "55" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "55" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "45" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "55" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "55" ], "fan_cooling_layer_time": [ @@ -55,18 +55,9 @@ "reduce_fan_stop_start_freq": [ "1" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "fan_max_speed": [ - "100" - ], "fan_min_speed": [ "100" ], - "overhang_fan_speed": [ - "100" - ], "overhang_fan_threshold": [ "50%" ], @@ -97,4 +88,4 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json index df97b1ccf4..5c490e0af8 100644 --- a/resources/profiles/BBL/filament/fdm_filament_tpu.json +++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json @@ -4,28 +4,28 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "cool_plate_temp": [ "30" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "30" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "35" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "35" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "30" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "30" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "35" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "35" ], "fan_cooling_layer_time": [ @@ -52,18 +52,9 @@ "reduce_fan_stop_start_freq": [ "1" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "fan_max_speed": [ - "100" - ], "fan_min_speed": [ "100" ], - "overhang_fan_speed": [ - "100" - ], "additional_cooling_fan_speed": [ "70" ], @@ -85,4 +76,4 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" ] -} +} \ No newline at end of file