diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json
index 1f86ff0016..6d44f7b91f 100644
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -36,6 +36,10 @@
 			"name": "Creality Ender-3",
 			"sub_path": "machine/Creality Ender-3.json"
 		},
+		{
+			"name":"Creality Ender-3 Pro",
+			"sub_path": "machine/Creality Ender-3 Pro.json"
+		},
 		{
 			"name": "Creality Ender-3 S1 Pro",
 			"sub_path": "machine/Creality Ender-3 S1 Pro.json"
@@ -126,6 +130,86 @@
 			"name": "fdm_process_creality_common_1_0",
 			"sub_path": "process/fdm_process_creality_common_1_0.json"
 		},
+		{
+			"name": "0.12mm Fine @Creality Ender3 Pro 0.2",
+			"sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.2.json"
+		},
+		{
+			"name": "0.12mm Fine @Creality Ender3 Pro 0.6",
+			"sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.6.json"
+		},
+		{
+			"name": "0.12mm Fine @Creality Ender3 Pro 0.8",
+			"sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.8.json"
+		},
+		{
+			"name": "0.12mm Fine @Creality Ender3 Pro 0.4",
+			"sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.4.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3 Pro 0.2",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.2.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3 Pro 0.4",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.4.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3 Pro 0.6",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.6.json"
+		},
+		{
+			"name": "0.16mm Optimal @Creality Ender3 Pro 0.8",
+			"sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.8.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3 Pro 0.2",
+			"sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.2.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3 Pro 0.4",
+			"sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3 Pro 0.6",
+			"sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.6.json"
+		},
+		{
+			"name": "0.20mm Standard @Creality Ender3 Pro 0.8",
+			"sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.8.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3 Pro 0.2",
+			"sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.2.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3 Pro 0.4",
+			"sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3 Pro 0.6",
+			"sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.6.json"
+		},
+		{
+			"name": "0.24mm Draft @Creality Ender3 Pro 0.8",
+			"sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.8.json"
+		},
+		{
+			"name": "0.28mm Draft @Creality Ender3 Pro 0.2",
+			"sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json"
+		},
+		{
+			"name": "0.28mm Draft @Creality Ender3 Pro 0.4",
+			"sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json"
+		},
+		{
+			"name": "0.28mm Draft @Creality Ender3 Pro 0.6",
+			"sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json"
+		},
+		{
+			"name": "0.28mm Draft @Creality Ender3 Pro 0.8",
+			"sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json"
+		},
 		{
 			"name": "0.08mm SuperDetail @Creality CR-6 0.2",
 			"sub_path": "process/0.08mm SuperDetail @Creality CR-6 0.2.json"
@@ -922,6 +1006,22 @@
 			"name": "Creality Ender-3 0.8 nozzle",
 			"sub_path": "machine/Creality Ender-3 0.8 nozzle.json"
 		},
+		{
+			"name": "Creality Ender-3 Pro 0.4 nozzle",
+			"sub_path": "machine/Creality Ender-3 Pro 0.4 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 Pro 0.2 nozzle",
+			"sub_path": "machine/Creality Ender-3 Pro 0.2 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 Pro 0.6 nozzle",
+			"sub_path": "machine/Creality Ender-3 Pro 0.6 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-3 Pro 0.8 nozzle",
+			"sub_path": "machine/Creality Ender-3 Pro 0.8 nozzle.json"
+		},
 		{
 			"name": "Creality Ender-3 S1 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-3 S1 0.4 nozzle.json"
@@ -1023,4 +1123,4 @@
 			"sub_path": "machine/Creality K1 Max (0.8 nozzle).json"
 		}
 	]
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/Creality/Creality Ender-3 Pro_cover.png b/resources/profiles/Creality/Creality Ender-3 Pro_cover.png
new file mode 100644
index 0000000000..d42c0dc14a
Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-3 Pro_cover.png differ
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json
new file mode 100644
index 0000000000..9cd139b34e
--- /dev/null
+++ b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.2",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..ca050a468e
--- /dev/null
+++ b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.4",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..759243c2b7
--- /dev/null
+++ b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.6",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.6",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json
new file mode 100644
index 0000000000..e807d8f2f0
--- /dev/null
+++ b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.8",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.8",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Pro.json b/resources/profiles/Creality/machine/Creality Ender-3 Pro.json
new file mode 100644
index 0000000000..6df373e534
--- /dev/null
+++ b/resources/profiles/Creality/machine/Creality Ender-3 Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 Pro",
+    "model_id": "Creality-Ender3-Pro",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v2_buildplate_model.stl",
+    "bed_texture": "creality_ender3v2_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000000..7fdec59c18
--- /dev/null
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000000..8db8cbe7bf
--- /dev/null
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000000..53a9e37792
--- /dev/null
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000000..29c2821863
--- /dev/null
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000000..15ea186a05
--- /dev/null
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000000..c673f050fd
--- /dev/null
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000000..3d99e46056
--- /dev/null
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000000..368893012f
--- /dev/null
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}	
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000000..76fe4f2103
--- /dev/null
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.20",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000000..ca3ae01e2f
--- /dev/null
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000000..96f81bb121
--- /dev/null
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000000..c5dc8ec7a2
--- /dev/null
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000000..2b495cad25
--- /dev/null
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000000..805dc42a38
--- /dev/null
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000000..bd4c6e5f2b
--- /dev/null
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000000..fdebf4946b
--- /dev/null
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000000..3d17eea026
--- /dev/null
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000000..1484a5a12a
--- /dev/null
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000000..6b4185940b
--- /dev/null
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000000..f884f5dc63
--- /dev/null
+++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file