diff --git a/resources/profiles/Flashforge.json b/resources/profiles/Flashforge.json index 950205f59f..740f234c6c 100644 --- a/resources/profiles/Flashforge.json +++ b/resources/profiles/Flashforge.json @@ -32,6 +32,14 @@ { "name": "Flashforge Guider 2s", "sub_path": "machine/Flashforge Guider 2s.json" + }, + { + "name": "Flashforge Guider4 Pro", + "sub_path": "machine/Flashforge Guider4 Pro.json" + }, + { + "name": "Flashforge Guider4", + "sub_path": "machine/Flashforge Guider4.json" } ], "process_list": [ @@ -289,7 +297,175 @@ }, { "name": "0.56mm Draft @FF AD5X 0.8 nozzle", - "sub_path":"process/0.56mm Draft @FF AD5X 0.8 nozzle.json" + "sub_path": "process/0.56mm Draft @FF AD5X 0.8 nozzle.json" + }, + { + "name": "0.16mm Standard @FF G4P", + "sub_path": "process/0.16mm Standard @FF G4P.json" + }, + { + "name": "0.20mm Standard @FF G4P", + "sub_path": "process/0.20mm Standard @FF G4P.json" + }, + { + "name": "0.24mm Standard @FF G4P", + "sub_path": "process/0.24mm Standard @FF G4P.json" + }, + { + "name": "0.16mm Standard @FF G4P HF", + "sub_path": "process/0.16mm Standard @FF G4P HF.json" + }, + { + "name": "0.20mm Standard @FF G4P HF for PLA 600", + "sub_path":"process/0.20mm Standard @FF G4P HF for PLA 600.json" + }, + { + "name": "0.20mm Standard @FF G4P HF", + "sub_path": "process/0.20mm Standard @FF G4P HF.json" + }, + { + "name": "0.24mm Standard @FF G4P HF", + "sub_path": "process/0.24mm Standard @FF G4P HF.json" + }, + { + "name": "0.25mm Standard @FF G4P 0.6 nozzle", + "sub_path": "process/0.25mm Standard @FF G4P 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @FF G4P 0.6 nozzle", + "sub_path": "process/0.30mm Standard @FF G4P 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @FF G4P 0.6 nozzle", + "sub_path": "process/0.36mm Standard @FF G4P 0.6 nozzle.json" + }, + { + "name": "0.42mm Standard @FF G4P 0.6 nozzle", + "sub_path": "process/0.42mm Standard @FF G4P 0.6 nozzle.json" + }, + { + "name": "0.25mm Standard @FF G4P 0.6 HF nozzle", + "sub_path": "process/0.25mm Standard @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "0.3mm Standard @FF G4P 0.6 HF nozzle", + "sub_path": "process/0.3mm Standard @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "0.36mm Standard @FF G4P 0.6 HF nozzle", + "sub_path": "process/0.36mm Standard @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "0.42mm Standard @FF G4P 0.6 HF nozzle", + "sub_path": "process/0.42mm Standard @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "0.32mm Standard @FF G4P 0.8 HF nozzle", + "sub_path": "process/0.32mm Standard @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "0.40mm Standard @FF G4P 0.8 HF nozzle", + "sub_path": "process/0.40mm Standard @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "0.48mm Standard @FF G4P 0.8 HF nozzle", + "sub_path": "process/0.48mm Standard @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "0.10mm Standard @FF G4P 0.25 nozzle", + "sub_path": "process/0.10mm Standard @FF G4P 0.25 nozzle.json" + }, + { + "name": "0.12mm Standard @FF G4P 0.25 nozzle", + "sub_path": "process/0.12mm Standard @FF G4P 0.25 nozzle.json" + }, + { + "name": "0.14mm Standard @FF G4P 0.25 nozzle", + "sub_path": "process/0.14mm Standard @FF G4P 0.25 nozzle.json" + }, + { + "name": "0.10mm Standard @FF G4 0.25 nozzle", + "sub_path": "process/0.10mm Standard @FF G4 0.25 nozzle.json" + }, + { + "name": "0.12mm Standard @FF G4 0.25 nozzle", + "sub_path": "process/0.12mm Standard @FF G4 0.25 nozzle.json" + }, + { + "name": "0.14mm Standard @FF G4 0.25 nozzle", + "sub_path": "process/0.14mm Standard @FF G4 0.25 nozzle.json" + }, + { + "name": "0.16mm Standard @FF G4", + "sub_path": "process/0.16mm Standard @FF G4.json" + }, + { + "name": "0.20mm Standard @FF G4", + "sub_path": "process/0.20mm Standard @FF G4.json" + }, + { + "name": "0.24mm Standard @FF G4", + "sub_path": "process/0.24mm Standard @FF G4.json" + }, + { + "name": "0.16mm Standard @FF G4 HF", + "sub_path": "process/0.16mm Standard @FF G4 HF.json" + }, + { + "name": "0.20mm Standard @FF G4 HF", + "sub_path": "process/0.20mm Standard @FF G4 HF.json" + }, + { + "name": "0.20mm Standard @FF G4 PLA600", + "sub_path": "process/0.20mm Standard @FF G4 PLA600.json" + }, + { + "name": "0.24mm Standard @FF G4 HF", + "sub_path": "process/0.24mm Standard @FF G4 HF.json" + }, + { + "name": "0.25mm Standard @FF G4 0.6 nozzle", + "sub_path": "process/0.25mm Standard @FF G4 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @FF G4 0.6 nozzle", + "sub_path": "process/0.30mm Standard @FF G4 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @FF G4 0.6 nozzle", + "sub_path": "process/0.36mm Standard @FF G4 0.6 nozzle.json" + }, + { + "name": "0.42mm Standard @FF G4 0.6 nozzle", + "sub_path": "process/0.42mm Standard @FF G4 0.6 nozzle.json" + }, + { + "name": "0.25mm Standard @FF G4 0.6 HF nozzle", + "sub_path": "process/0.25mm Standard @FF G4 0.6 HF nozzle.json" + }, + { + "name": "0.3mm Standard @FF G4 0.6 HF nozzle", + "sub_path": "process/0.3mm Standard @FF G4 0.6 HF nozzle.json" + }, + { + "name": "0.36mm Standard @FF G4 0.6 HF nozzle", + "sub_path": "process/0.36mm Standard @FF G4 0.6 HF nozzle.json" + }, + { + "name": "0.42mm Standard @FF G4 0.6 HF nozzle", + "sub_path": "process/0.42mm Standard @FF G4 0.6 HF nozzle.json" + }, + { + "name": "0.32mm Standard @FF G4 0.8 HF nozzle", + "sub_path": "process/0.32mm Standard @FF G4 0.8 HF nozzle.json" + }, + { + "name": "0.40mm Standard @FF G4 0.8 HF nozzle", + "sub_path": "process/0.40mm Standard @FF G4 0.8 HF nozzle.json" + }, + { + "name": "0.48mm Standard @FF G4 0.8 HF nozzle", + "sub_path": "process/0.48mm Standard @FF G4 0.8 HF nozzle.json" } ], "filament_list": [ @@ -321,6 +497,10 @@ "name": "Flashforge Generic ABS", "sub_path": "filament/Flashforge Generic ABS.json" }, + { + "name": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "sub_path": "filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json" + }, { "name": "Flashforge Generic ABS @FF AD5M 0.25 Nozzle", "sub_path": "filament/Flashforge Generic ABS @FF AD5M 0.25 Nozzle.json" @@ -329,6 +509,10 @@ "name": "Flashforge Generic PETG", "sub_path": "filament/Flashforge Generic PETG.json" }, + { + "name": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "sub_path": "filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json" + }, { "name": "Flashforge Generic PETG @FF AD5M 0.25 Nozzle", "sub_path": "filament/Flashforge Generic PETG @FF AD5M 0.25 Nozzle.json" @@ -337,6 +521,10 @@ "name": "Flashforge Generic PLA", "sub_path": "filament/Flashforge Generic PLA.json" }, + { + "name": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "sub_path": "filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json" + }, { "name": "Flashforge Generic PLA @FF AD5M 0.25 Nozzle", "sub_path": "filament/Flashforge Generic PLA @FF AD5M 0.25 Nozzle.json" @@ -349,6 +537,10 @@ "name": "Flashforge Generic PLA-Silk", "sub_path": "filament/Flashforge Generic PLA-Silk.json" }, + { + "name": "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle", + "sub_path": "filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json" + }, { "name": "Flashforge Generic PLA-SILK @FF AD5M 0.25 Nozzle", "sub_path": "filament/Flashforge Generic PLA-SILK @FF AD5M 0.25 Nozzle.json" @@ -357,6 +549,10 @@ "name": "Flashforge Generic HS PLA", "sub_path": "filament/Flashforge Generic HS PLA.json" }, + { + "name": "Flashforge HS PLA @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json" + }, { "name": "Flashforge Generic HS PLA @FF AD5M 0.25 Nozzle", "sub_path": "filament/Flashforge Generic HS PLA @FF AD5M 0.25 Nozzle.json" @@ -365,6 +561,10 @@ "name": "Flashforge Generic ASA", "sub_path": "filament/Flashforge Generic ASA.json" }, + { + "name": "Flashforge ASA @FF AD5M 0.25 Nozzle", + "sub_path": "filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json" + }, { "name": "Flashforge Generic ASA @FF AD5M 0.25 Nozzle", "sub_path": "filament/Flashforge Generic ASA @FF AD5M 0.25 Nozzle.json" @@ -552,7 +752,463 @@ { "name": "Generic TPU @Flashforge AD4", "sub_path": "filament/Generic TPU @Flashforge AD4.json" - }, + }, + { + "name": "Flashforge HS PETG", + "sub_path": "filament/Flashforge HS PETG.json" + }, + { + "name": "Flashforge HS PLA", + "sub_path": "filament/Flashforge HS PLA.json" + }, + { + "name": "Flashforge PETG Basic", + "sub_path": "filament/Flashforge PETG Basic.json" + }, + { + "name": "Flashforge PETG Pro", + "sub_path": "filament/Flashforge PETG Pro.json" + }, + { + "name": "Flashforge PETG Transparent", + "sub_path": "filament/Flashforge PETG Transparent.json" + }, + { + "name": "Flashforge PETG-CF", + "sub_path": "filament/Flashforge PETG-CF.json" + }, + { + "name": "Flashforge PLA Basic", + "sub_path": "filament/Flashforge PLA Basic.json" + }, + { + "name": "Flashforge PLA Color Change", + "sub_path": "filament/Flashforge PLA Color Change.json" + }, + { + "name": "Flashforge PLA Galaxy", + "sub_path": "filament/Flashforge PLA Galaxy.json" + }, + { + "name": "Flashforge PLA Luminous", + "sub_path": "filament/Flashforge PLA Luminous.json" + }, + { + "name": "Flashforge PLA Matte", + "sub_path": "filament/Flashforge PLA Matte.json" + }, + { + "name": "Flashforge PLA Metal", + "sub_path": "filament/Flashforge PLA Metal.json" + }, + { + "name": "Flashforge PLA Pro", + "sub_path": "filament/Flashforge PLA Pro.json" + }, + { + "name": "Flashforge PLA Silk", + "sub_path": "filament/Flashforge PLA Silk.json" + }, + { + "name": "Flashforge PLA Sparkle", + "sub_path": "filament/Flashforge PLA Sparkle.json" + }, + { + "name": "Flashforge PLA-CF", + "sub_path": "filament/Flashforge PLA-CF.json" + }, + { + "name": "Flashforge TPU 95A", + "sub_path": "filament/Flashforge TPU 95A.json" + }, + { + "name": "Flashforge ABS Basic @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge ABS Basic", + "sub_path": "filament/Flashforge ABS Basic.json" + }, + { + "name": "Flashforge ASA Basic @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge ASA Basic", + "sub_path": "filament/Flashforge ASA Basic.json" + }, + { + "name": "Flashforge HS PETG @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Basic @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Basic @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json" + }, + { + "name": "Flashforge ASA-CF", + "sub_path": "filament/Flashforge ASA-CF.json" + }, + { + "name": "Flashforge PA6-CF", + "sub_path": "filament/Flashforge PA6-CF.json" + }, + { + "name": "Flashforge PA12-CF", + "sub_path": "filament/Flashforge PA12-CF.json" + }, + { + "name": "Flashforge PA66-CF", + "sub_path": "filament/Flashforge PA66-CF.json" + }, + { + "name": "Flashforge PET-CF", + "sub_path": "filament/Flashforge PET-CF.json" + }, + { + "name": "Flashforge PPA-CF", + "sub_path": "filament/Flashforge PPA-CF.json" + }, + { + "name": "Flashforge PPA-GF", + "sub_path": "filament/Flashforge PPA-GF.json" + }, + { + "name": "Flashforge PPS-CF", + "sub_path": "filament/Flashforge PPS-CF.json" + }, + { + "name": "Flashforge ABS Basic @FF AD5X", + "sub_path": "filament/Flashforge ABS Basic @FF AD5X.json" + }, + { + "name": "Flashforge ASA Basic @FF AD5X", + "sub_path": "filament/Flashforge ASA Basic @FF AD5X.json" + }, + { + "name": "Flashforge HS PETG @FF AD5X", + "sub_path": "filament/Flashforge HS PETG @FF AD5X.json" + }, + { + "name": "Flashforge HS PLA @FF AD5X", + "sub_path": "filament/Flashforge HS PLA @FF AD5X.json" + }, + { + "name": "Flashforge PETG Pro @FF AD5X", + "sub_path": "filament/Flashforge PETG Pro @FF AD5X.json" + }, + { + "name": "Flashforge PETG Transparent @FF AD5X", + "sub_path": "filament/Flashforge PETG Transparent @FF AD5X.json" + }, + { + "name": "Flashforge PETG-CF @FF AD5X", + "sub_path": "filament/Flashforge PETG-CF @FF AD5X.json" + }, + { + "name": "Flashforge PLA Basic @FF AD5X", + "sub_path": "filament/Flashforge PLA Basic @FF AD5X.json" + }, + { + "name": "Flashforge PLA Color Change @FF AD5X", + "sub_path": "filament/Flashforge PLA Color Change @FF AD5X.json" + }, + { + "name": "Flashforge PLA Galaxy @FF AD5X", + "sub_path": "filament/Flashforge PLA Galaxy @FF AD5X.json" + }, + { + "name": "Flashforge PLA Luminous @FF AD5X", + "sub_path": "filament/Flashforge PLA Luminous @FF AD5X.json" + }, + { + "name": "Flashforge PLA Matte @FF AD5X", + "sub_path": "filament/Flashforge PLA Matte @FF AD5X.json" + }, + { + "name": "Flashforge PLA Metal @FF AD5X", + "sub_path": "filament/Flashforge PLA Metal @FF AD5X.json" + }, + { + "name": "Flashforge PLA Pro @FF AD5X", + "sub_path": "filament/Flashforge PLA Pro @FF AD5X.json" + }, + { + "name": "Flashforge PLA Silk @FF AD5X", + "sub_path": "filament/Flashforge PLA Silk @FF AD5X.json" + }, + { + "name": "Flashforge PLA Sparkle @FF AD5X", + "sub_path": "filament/Flashforge PLA Sparkle @FF AD5X.json" + }, + { + "name": "Flashforge PLA-CF @FF AD5X", + "sub_path": "filament/Flashforge PLA-CF @FF AD5X.json" + }, + { + "name": "Flashforge TPU 95A @FF AD5X", + "sub_path": "filament/Flashforge TPU 95A @FF AD5X.json" + }, + { + "name": "Flashforge ABS Basic @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG-CF @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA-CF @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF AD5X 0.6 nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PETG-CF @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA-CF @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF AD5X 0.8 nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Generic TPU 85A @FF AD5X", + "sub_path":"filament/Generic TPU 85A @FF AD5X.json" + }, + { + "name": "Generic TPU 85A @FF AD5X 0.8 nozzle", + "sub_path":"filament/Generic TPU 85A @FF AD5X 0.8 nozzle.json" + }, + { + "name": "Generic TPU 85A @FF AD5X 0.6 nozzle", + "sub_path":"filament/Generic TPU 85A @FF AD5X 0.6 nozzle.json" + }, { "name": "SUNLU PLA Matte @base", "sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json" @@ -660,7 +1316,1127 @@ { "name": "SUNLU Wood PLA @FF AD3", "sub_path": "filament/SUNLU/SUNLU Wood PLA @FF AD3.json" - } + }, + { + "name": "Flashforge ABS Basic @FF G4P", + "sub_path": "filament/Flashforge ABS Basic @FF G4P.json" + }, + { + "name": "Flashforge ABS-CF @FF G4P", + "sub_path": "filament/Flashforge ABS-CF @FF G4P.json" + }, + { + "name": "Flashforge ASA Basic @FF G4P", + "sub_path": "filament/Flashforge ASA Basic @FF G4P.json" + }, + { + "name": "Flashforge ASA-CF @FF G4P", + "sub_path":"filament/Flashforge ASA-CF @FF G4P.json" + }, + { + "name": "Flashforge HIPS @FF G4P", + "sub_path": "filament/Flashforge HIPS @FF G4P.json" + }, + { + "name": "Flashforge HS PETG @FF G4P", + "sub_path": "filament/Flashforge HS PETG @FF G4P.json" + }, + { + "name": "Flashforge HS PLA @FF G4P", + "sub_path": "filament/Flashforge HS PLA @FF G4P.json" + }, + { + "name": "Flashforge PA @FF G4P", + "sub_path": "filament/Flashforge PA @FF G4P.json" + }, + { + "name": "Flashforge PA-CF @FF G4P", + "sub_path": "filament/Flashforge PA-CF @FF G4P.json" + }, + { + "name": "Flashforge PAHT-CF @FF G4P", + "sub_path": "filament/Flashforge PAHT-CF @FF G4P.json" + }, + { + "name": "Flashforge PETG Pro @FF G4P", + "sub_path": "filament/Flashforge PETG Pro @FF G4P.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4P", + "sub_path": "filament/Flashforge PETG Transparent @FF G4P.json" + }, + { + "name": "Flashforge PETG-CF @FF G4P", + "sub_path": "filament/Flashforge PETG-CF @FF G4P.json" + }, + { + "name": "Flashforge PLA Basic @FF G4P", + "sub_path": "filament/Flashforge PLA Basic @FF G4P.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4P", + "sub_path": "filament/Flashforge PLA Color Change @FF G4P.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4P", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4P.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4P", + "sub_path": "filament/Flashforge PLA Luminous @FF G4P.json" + }, + { + "name": "Flashforge PLA Matte @FF G4P", + "sub_path": "filament/Flashforge PLA Matte @FF G4P.json" + }, + { + "name": "Flashforge PLA Metal @FF G4P", + "sub_path": "filament/Flashforge PLA Metal @FF G4P.json" + }, + { + "name": "Flashforge PLA Pro @FF G4P", + "sub_path": "filament/Flashforge PLA Pro @FF G4P.json" + }, + { + "name": "Flashforge PLA Silk @FF G4P", + "sub_path": "filament/Flashforge PLA Silk @FF G4P.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4P", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4P.json" + }, + { + "name": "Flashforge PLA-CF @FF G4P", + "sub_path": "filament/Flashforge PLA-CF @FF G4P.json" + }, + { + "name": "Flashforge PPS @FF G4P", + "sub_path": "filament/Flashforge PPS @FF G4P.json" + }, + { + "name": "Flashforge PPS-CF @FF G4P", + "sub_path": "filament/Flashforge PPS-CF @FF G4P.json" + }, + { + "name": "Flashforge TPU 95A @FF G4P", + "sub_path": "filament/Flashforge TPU 95A @FF G4P.json" + }, + { + "name": "FusRock PAHT-CF @FF G4P", + "sub_path":"filament/FusRock PAHT-CF @FF G4P.json" + }, + { + "name": "FusRock PET-CF @FF G4P", + "sub_path":"filament/FusRock PET-CF @FF G4P.json" + }, + { + "name": "Generic PET @FF G4P", + "sub_path":"filament/Generic PET @FF G4P.json" + }, + { + "name": "Flashforge ABS Basic @FF G4P HF", + "sub_path": "filament/Flashforge ABS Basic @FF G4P HF.json" + }, + { + "name": "Flashforge ASA Basic @FF G4P HF", + "sub_path": "filament/Flashforge ASA Basic @FF G4P HF.json" + }, + { + "name": "Flashforge HIPS @FF G4P HF", + "sub_path": "filament/Flashforge HIPS @FF G4P HF.json" + }, + { + "name": "Flashforge HS PETG @FF G4P HF", + "sub_path": "filament/Flashforge HS PETG @FF G4P HF.json" + }, + { + "name": "Flashforge HS PLA @FF G4P HF", + "sub_path": "filament/Flashforge HS PLA @FF G4P HF.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti @FF G4P HF", + "sub_path": "filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json" + }, + { + "name": "Flashforge PA @FF G4P HF", + "sub_path": "filament/Flashforge PA @FF G4P HF.json" + }, + { + "name": "Flashforge PETG Pro @FF G4P HF", + "sub_path": "filament/Flashforge PETG Pro @FF G4P HF.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4P HF", + "sub_path": "filament/Flashforge PETG Transparent @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Basic @FF G4P HF", + "sub_path": "filament/Flashforge PLA Basic @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4P HF", + "sub_path": "filament/Flashforge PLA Color Change @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4P HF", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4P HF", + "sub_path": "filament/Flashforge PLA Luminous @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Matte @FF G4P HF", + "sub_path": "filament/Flashforge PLA Matte @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Metal @FF G4P HF", + "sub_path": "filament/Flashforge PLA Metal @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Pro @FF G4P HF", + "sub_path": "filament/Flashforge PLA Pro @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Silk @FF G4P HF", + "sub_path": "filament/Flashforge PLA Silk @FF G4P HF.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4P HF", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4P HF.json" + }, + { + "name": "Flashforge ABS Basic @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge ABS-CF @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge HIPS @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge HIPS @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json" + }, + { + "name": "FlashForge PC @FF G4P 0.6 nozzle", + "sub_path": "filament/FlashForge PC @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG-CF @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4P 0.6 nozzle", + "sub_path":"filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4P 0.6 nozzle", + "sub_path":"filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA-CF @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json" + }, + { + "name": "FlashForge PPS @FF G4P 0.6 nozzle", + "sub_path": "filament/FlashForge PPS @FF G4P 0.6 nozzle.json" + }, + { + "name": "FlashForge PPS-CF @FF G4P 0.6 nozzle", + "sub_path": "filament/FlashForge PPS-CF @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge TPU 65D @FF G4P 0.6 nozzle", + "sub_path":"filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF G4P 0.6 nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json" + }, + { + "name": "FusRock PAHT @FF G4P 0.6 nozzle", + "sub_path": "filament/FusRock PAHT @FF G4P 0.6 nozzle.json" + }, + { + "name": "FusRock PAHT-CF @FF G4P 0.6 nozzle", + "sub_path": "filament/FusRock PAHT-CF @FF G4P 0.6 nozzle.json" + }, + { + "name": "FusRock PET-CF @FF G4P 0.6 nozzle", + "sub_path": "filament/FusRock PET-CF @FF G4P 0.6 nozzle.json" + }, + { + "name": "Generic PET @FF G4P 0.6 nozzle", + "sub_path":"filament/Generic PET @FF G4P 0.6 nozzle.json" + }, + { + "name": "Polymaker CoPA @FF G4P 0.6 nozzle", + "sub_path": "filament/Polymaker CoPA @FF G4P 0.6 nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HIPS @FF G4P 0.6 HF nozzle", + "sub_path":"filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PA @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PA @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "FlashForge PC @FF G4P 0.6 HF nozzle", + "sub_path": "filament/FlashForge PC @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "FlashForge PPS @FF G4P 0.6 HF nozzle", + "sub_path":"filament/FlashForge PPS @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge TPU 65D @FF G4P 0.6 HF nozzle", + "sub_path":"filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "FusRock PAHT @FF G4P 0.6 HF nozzle", + "sub_path":"filament/FusRock PAHT @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Generic PET @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Generic PET @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Polymaker CoPA @FF G4P 0.6 HF nozzle", + "sub_path": "filament/Polymaker CoPA @FF G4P 0.6 HF nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HIPS @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json" + }, + { + "name": "FlashForge PC @FF G4P 0.8 HF nozzle", + "sub_path": "filament/FlashForge PC @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Buint Ti @FF G4P 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Buint Ti @FF G4P 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4P 0.8 HF nozzle", + "sub_path":"filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4P 0.8 HF nozzle", + "sub_path":"filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "FlashForge PPS @FF G4P 0.8 HF nozzle", + "sub_path": "filament/FlashForge PPS @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge TPU 65D @FF G4P 0.8 HF nozzle", + "sub_path":"filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "FusRock PAHT @FF G4P 0.8 HF nozzle", + "sub_path": "filament/FusRock PAHT @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Generic PET @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Generic PET @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Polymaker CoPA @FF G4P 0.8 HF nozzle", + "sub_path": "filament/Polymaker CoPA @FF G4P 0.8 HF nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4 0.25 nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4", + "sub_path": "filament/Flashforge ABS Basic @FF G4.json" + }, + { + "name": "Flashforge ABS-CF @FF G4", + "sub_path": "filament/Flashforge ABS-CF @FF G4.json" + }, + { + "name": "Flashforge ASA Basic @FF G4", + "sub_path": "filament/Flashforge ASA Basic @FF G4.json" + }, + { + "name": "Flashforge ASA-CF @FF G4", + "sub_path":"filament/Flashforge ASA-CF @FF G4.json" + }, + { + "name": "Flashforge HIPS @FF G4", + "sub_path": "filament/Flashforge HIPS @FF G4.json" + }, + { + "name": "Flashforge HS PETG @FF G4", + "sub_path": "filament/Flashforge HS PETG @FF G4.json" + }, + { + "name": "Flashforge HS PLA @FF G4", + "sub_path": "filament/Flashforge HS PLA @FF G4.json" + }, + { + "name": "Flashforge PA @FF G4", + "sub_path": "filament/Flashforge PA @FF G4.json" + }, + { + "name": "Flashforge PA-CF @FF G4", + "sub_path": "filament/Flashforge PA-CF @FF G4.json" + }, + { + "name": "Flashforge PAHT-CF @FF G4", + "sub_path": "filament/Flashforge PAHT-CF @FF G4.json" + }, + { + "name": "Flashforge PETG Pro @FF G4", + "sub_path": "filament/Flashforge PETG Pro @FF G4.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4", + "sub_path": "filament/Flashforge PETG Transparent @FF G4.json" + }, + { + "name": "Flashforge PETG-CF @FF G4", + "sub_path": "filament/Flashforge PETG-CF @FF G4.json" + }, + { + "name": "Flashforge PLA Basic @FF G4", + "sub_path": "filament/Flashforge PLA Basic @FF G4.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4", + "sub_path": "filament/Flashforge PLA Color Change @FF G4.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4", + "sub_path": "filament/Flashforge PLA Luminous @FF G4.json" + }, + { + "name": "Flashforge PLA Matte @FF G4", + "sub_path": "filament/Flashforge PLA Matte @FF G4.json" + }, + { + "name": "Flashforge PLA Metal @FF G4", + "sub_path": "filament/Flashforge PLA Metal @FF G4.json" + }, + { + "name": "Flashforge PLA Pro @FF G4", + "sub_path": "filament/Flashforge PLA Pro @FF G4.json" + }, + { + "name": "Flashforge PLA Silk @FF G4", + "sub_path": "filament/Flashforge PLA Silk @FF G4.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4.json" + }, + { + "name": "Flashforge PLA-CF @FF G4", + "sub_path": "filament/Flashforge PLA-CF @FF G4.json" + }, + { + "name": "Flashforge PPS @FF G4", + "sub_path": "filament/Flashforge PPS @FF G4.json" + }, + { + "name": "Flashforge PPS-CF @FF G4", + "sub_path": "filament/Flashforge PPS-CF @FF G4.json" + }, + { + "name": "Flashforge TPU 95A @FF G4", + "sub_path": "filament/Flashforge TPU 95A @FF G4.json" + }, + { + "name": "FusRock PAHT-CF @FF G4", + "sub_path": "filament/FusRock PAHT-CF @FF G4.json" + }, + { + "name": "FusRock PET-CF @FF G4", + "sub_path": "filament/FusRock PET-CF @FF G4.json" + }, + { + "name": "Generic PET @FF G4", + "sub_path": "filament/Generic PET @FF G4.json" + }, + { + "name": "Flashforge ABS Basic @FF G4 HF", + "sub_path": "filament/Flashforge ABS Basic @FF G4 HF.json" + }, + { + "name": "Flashforge ASA Basic @FF G4 HF", + "sub_path": "filament/Flashforge ASA Basic @FF G4 HF.json" + }, + { + "name": "Flashforge HIPS @FF G4 HF", + "sub_path": "filament/Flashforge HIPS @FF G4 HF.json" + }, + { + "name": "Flashforge HS PETG @FF G4 HF", + "sub_path": "filament/Flashforge HS PETG @FF G4 HF.json" + }, + { + "name": "Flashforge HS PLA @FF G4 HF", + "sub_path": "filament/Flashforge HS PLA @FF G4 HF.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti @FF G4 HF", + "sub_path": "filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json" + }, + { + "name": "Flashforge PA @FF G4 HF", + "sub_path": "filament/Flashforge PA @FF G4 HF.json" + }, + { + "name": "Flashforge PETG Pro @FF G4 HF", + "sub_path": "filament/Flashforge PETG Pro @FF G4 HF.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4 HF", + "sub_path": "filament/Flashforge PETG Transparent @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Basic @FF G4 HF", + "sub_path": "filament/Flashforge PLA Basic @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4 HF", + "sub_path": "filament/Flashforge PLA Color Change @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4 HF", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4 HF", + "sub_path": "filament/Flashforge PLA Luminous @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Matte @FF G4 HF", + "sub_path": "filament/Flashforge PLA Matte @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Metal @FF G4 HF", + "sub_path": "filament/Flashforge PLA Metal @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Pro @FF G4 HF", + "sub_path": "filament/Flashforge PLA Pro @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Silk @FF G4 HF", + "sub_path": "filament/Flashforge PLA Silk @FF G4 HF.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4 HF", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4 HF.json" + }, + { + "name": "Flashforge ABS Basic @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge ABS-CF @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge HIPS @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge HIPS @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json" + }, + { + "name": "FlashForge PC @FF G4 0.6 nozzle", + "sub_path": "filament/FlashForge PC @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PETG-CF @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4 0.6 nozzle", + "sub_path":"filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge PLA-CF @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json" + }, + { + "name": "FlashForge PPS @FF G4 0.6 nozzle", + "sub_path": "filament/FlashForge PPS @FF G4 0.6 nozzle.json" + }, + { + "name": "FlashForge PPS-CF @FF G4 0.6 nozzle", + "sub_path": "filament/FlashForge PPS-CF @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge TPU 65D @FF G4 0.6 nozzle", + "sub_path":"filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF G4 0.6 nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json" + }, + { + "name": "FusRock PAHT @FF G4 0.6 nozzle", + "sub_path": "filament/FusRock PAHT @FF G4 0.6 nozzle.json" + }, + { + "name": "FusRock PAHT-CF @FF G4 0.6 nozzle", + "sub_path": "filament/FusRock PAHT-CF @FF G4 0.6 nozzle.json" + }, + { + "name": "FusRock PET-CF @FF G4 0.6 nozzle", + "sub_path":"filament/FusRock PET-CF @FF G4 0.6 nozzle.json" + }, + { + "name": "Generic PET @FF G4 0.6 nozzle", + "sub_path": "filament/Generic PET @FF G4 0.6 nozzle.json" + }, + { + "name": "Polymaker CoPA @FF G4 0.6 nozzle", + "sub_path": "filament/Polymaker CoPA @FF G4 0.6 nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HIPS @FF G4 0.6 HF nozzle", + "sub_path":"filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PA @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PA @FF G4 0.6 HF nozzle.json" + }, + { + "name": "FlashForge PC @FF G4 0.6 HF nozzle", + "sub_path": "filament/FlashForge PC @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge PLA Sparkle @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json" + }, + { + "name": "FlashForge PPS @FF G4 0.6 HF nozzle", + "sub_path":"filament/FlashForge PPS @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge TPU 65D @FF G4 0.6 HF nozzle", + "sub_path":"filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json" + }, + { + "name": "FusRock PAHT @FF G4 0.6 HF nozzle", + "sub_path":"filament/FusRock PAHT @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Generic PET @FF G4 0.6 HF nozzle", + "sub_path": "filament/Generic PET @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Polymaker CoPA @FF G4 0.6 HF nozzle", + "sub_path": "filament/Polymaker CoPA @FF G4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge ABS Basic @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge ASA Basic @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HIPS @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HS PETG @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json" + }, + { + "name": "FlashForge PC @FF G4 0.8 HF nozzle", + "sub_path": "filament/FlashForge PC @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PETG Pro @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PETG Transparent @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Basic @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Buint Ti @FF G4 0.8 nozzle", + "sub_path": "filament/Flashforge PLA Buint Ti @FF G4 0.8 nozzle.json" + }, + { + "name": "Flashforge PLA Color Change @FF G4 0.8 HF nozzle", + "sub_path":"filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Galaxy @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Luminous @FF G4 0.8 HF nozzle", + "sub_path":"filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Matte @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Metal @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Pro @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge PLA Silk @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json" + }, + { + "name": "FlashForge PPS @FF G4 0.8 HF nozzle", + "sub_path": "filament/FlashForge PPS @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge TPU 65D @FF G4 0.8 HF nozzle", + "sub_path":"filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge TPU 95A @FF G4 0.8 HF nozzle", + "sub_path": "filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json" + }, + { + "name": "FusRock PAHT @FF G4 0.8 HF nozzle", + "sub_path": "filament/FusRock PAHT @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Generic PET @FF G4 0.8 HF nozzle", + "sub_path": "filament/Generic PET @FF G4 0.8 HF nozzle.json" + }, + { + "name": "Polymaker CoPA @FF G4 0.8 HF nozzle", + "sub_path": "filament/Polymaker CoPA @FF G4 0.8 HF nozzle.json" + } ], "machine_list": [ { @@ -773,7 +2549,55 @@ }, { "name": "Flashforge AD5X 0.8 nozzle", - "sub_path":"machine/Flashforge AD5X 0.8 nozzle.json" + "sub_path": "machine/Flashforge AD5X 0.8 nozzle.json" + }, + { + "name": "Flashforge Guider4 Pro 0.4 nozzle", + "sub_path": "machine/Flashforge Guider4 Pro 0.4 nozzle.json" + }, + { + "name": "Flashforge Guider4 Pro 0.4 HF nozzle", + "sub_path": "machine/Flashforge Guider4 Pro 0.4 HF nozzle.json" + }, + { + "name": "Flashforge Guider4 Pro 0.6 nozzle", + "sub_path": "machine/Flashforge Guider4 Pro 0.6 nozzle.json" + }, + { + "name": "Flashforge Guider4 Pro 0.6 HF nozzle", + "sub_path": "machine/Flashforge Guider4 Pro 0.6 HF nozzle.json" + }, + { + "name": "Flashforge Guider4 Pro 0.8 HF nozzle", + "sub_path": "machine/Flashforge Guider4 Pro 0.8 HF nozzle.json" + }, + { + "name": "Flashforge Guider4 Pro 0.25 nozzle", + "sub_path": "machine/Flashforge Guider4 Pro 0.25 nozzle.json" + }, + { + "name": "Flashforge Guider4 0.4 nozzle", + "sub_path": "machine/Flashforge Guider4 0.4 nozzle.json" + }, + { + "name": "Flashforge Guider4 0.4 HF nozzle", + "sub_path": "machine/Flashforge Guider4 0.4 HF nozzle.json" + }, + { + "name": "Flashforge Guider4 0.6 nozzle", + "sub_path": "machine/Flashforge Guider4 0.6 nozzle.json" + }, + { + "name": "Flashforge Guider4 0.6 HF nozzle", + "sub_path": "machine/Flashforge Guider4 0.6 HF nozzle.json" + }, + { + "name": "Flashforge Guider4 0.8 HF nozzle", + "sub_path": "machine/Flashforge Guider4 0.8 HF nozzle.json" + }, + { + "name": "Flashforge Guider4 0.25 nozzle", + "sub_path": "machine/Flashforge Guider4 0.25 nozzle.json" } ] } diff --git a/resources/profiles/Flashforge/Flashforge Guider4 Pro_cover.png b/resources/profiles/Flashforge/Flashforge Guider4 Pro_cover.png new file mode 100644 index 0000000000..0c65964205 Binary files /dev/null and b/resources/profiles/Flashforge/Flashforge Guider4 Pro_cover.png differ diff --git a/resources/profiles/Flashforge/Flashforge Guider4_cover.png b/resources/profiles/Flashforge/Flashforge Guider4_cover.png new file mode 100644 index 0000000000..eb108eae61 Binary files /dev/null and b/resources/profiles/Flashforge/Flashforge Guider4_cover.png differ diff --git a/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..ab6b900a06 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.6 HF nozzle.json @@ -0,0 +1,95 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PC @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PC" + ], + "filament_type": [ + "PC" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PC @FF G4 0.6 HF nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "temperature_vitrification": [ + "120" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..5c8d3e6186 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PC @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PC" + ], + "filament_type": [ + "PC" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PC @FF G4 0.6 nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "temperature_vitrification": [ + "120" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..33e4f56129 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4 0.8 HF nozzle.json @@ -0,0 +1,95 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PC @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PC" + ], + "filament_type": [ + "PC" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PC @FF G4 0.8 HF nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "temperature_vitrification": [ + "120" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..b9e017271b --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,95 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PC @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PC" + ], + "filament_type": [ + "PC" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PC @FF G4P 0.6 HF nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "temperature_vitrification": [ + "120" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..fc426b4780 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PC @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PC" + ], + "filament_type": [ + "PC" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PC @FF G4P 0.6 nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "temperature_vitrification": [ + "120" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..0dd7065e41 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PC @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,95 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PC @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PC" + ], + "filament_type": [ + "PC" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PC @FF G4P 0.8 HF nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "temperature_vitrification": [ + "120" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..3e0b122381 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.6 HF nozzle.json @@ -0,0 +1,116 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "315" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "125" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..ae07779b54 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.6 nozzle.json @@ -0,0 +1,116 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "125" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..e2e6b33e62 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4 0.8 HF nozzle.json @@ -0,0 +1,116 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "315" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "125" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..c8ec750ae3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,116 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "315" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "125" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..18174832a5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.6 nozzle.json @@ -0,0 +1,116 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "125" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..5ecf87b062 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,116 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "315" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "125" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS-CF @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..ccfbe17c45 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS-CF @FF G4 0.6 nozzle.json @@ -0,0 +1,104 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS-CF @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS-CF @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "315" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "220" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FlashForge PPS-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FlashForge PPS-CF @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..ef927660a9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FlashForge PPS-CF @FF G4P 0.6 nozzle.json @@ -0,0 +1,104 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "175" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FlashForge PPS-CF @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS" + ], + "filament_type": [ + "PPS-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FlashForge PPS-CF @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "315" + ], + "nozzle_temperature_initial_layer": [ + "315" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "40" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "5" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "220" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json new file mode 100644 index 0000000000..c181444314 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "inherits": "Flashforge Generic ABS", + "from": "system", + "setting_id": "GFSA04_02", + "instantiation": "false", + "compatible_printers": [ + "Flashforge Adventurer 5M 0.25 Nozzle", + "Flashforge Adventurer 5M Pro 0.25 Nozzle" + ], + "filament_id": "GFB99", + "filament_settings_id": [ + "Flashforge ABS @FF AD5M 0.25 Nozzle" + ], + "fan_max_speed": [ + "50" + ], + "filament_cost": [ + "40" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "pressure_advance": [ + "0.1" + ], + "version": "1.8.0.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..e918ad383b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge ABS Basic @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_02", + "instantiation": "true", + "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..96f41106d0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.25 nozzle.json @@ -0,0 +1,64 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_02", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "260" + ], + "pressure_advance": [ + "0.04" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..9c93db6d67 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF AD5X 0.6 nozzle", + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..eb01b4b3f6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF AD5X 0.8 nozzle", + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json new file mode 100644 index 0000000000..32bcf75b44 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json @@ -0,0 +1,54 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF AD5X", + "nozzle_temperature": [ + "260" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..273bd391c2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.25 nozzle.json @@ -0,0 +1,44 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "20" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4 0.25 nozzle", + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..64332a6e58 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json @@ -0,0 +1,104 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:ABS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..6d045f7b18 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ABS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..8dcd6f00d8 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ABS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json new file mode 100644 index 0000000000..26640be840 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json @@ -0,0 +1,77 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ABS\n" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4 HF", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json new file mode 100644 index 0000000000..8c3ff52ae1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json @@ -0,0 +1,53 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4", + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..02b6c2463e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.25 nozzle.json @@ -0,0 +1,68 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4P 0.25 nozzle", + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..0f7f2b461d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,104 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:ABS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..e44869f419 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ABS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..ec3b670e55 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ABS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json new file mode 100644 index 0000000000..aa5623e96e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json @@ -0,0 +1,101 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ABS\n" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4P HF", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "80" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json new file mode 100644 index 0000000000..3faedc0b46 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json @@ -0,0 +1,53 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_settings_id": [ + "Flashforge ABS Basic @FF G4P" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS Basic @FF G4P", + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json new file mode 100644 index 0000000000..8a357f570f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Flashforge ABS Basic", + "inherits": "Flashforge Generic ABS", + "from": "system", + "filament_settings_id": [ + "Flashforge ABS Basic" + ], + "setting_id": "GFSA04_02", + "instantiation": "true", + "is_custom_defined": "0", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..e9b1e9708d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json @@ -0,0 +1,101 @@ +{ + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS-CF @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ABS" + ], + "filament_type": [ + "ABS-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS-CF @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json new file mode 100644 index 0000000000..c4c2716f77 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json @@ -0,0 +1,71 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_settings_id": [ + "Flashforge ABS-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ABS-CF\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS-CF @FF G4", + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "6" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..55c791eb22 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json @@ -0,0 +1,101 @@ +{ + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ABS-CF @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ABS" + ], + "filament_type": [ + "ABS-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ABS-CF @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json new file mode 100644 index 0000000000..66e0aed0e6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json @@ -0,0 +1,71 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_settings_id": [ + "Flashforge ABS-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ABS-CF\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ABS-CF @FF G4P", + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "6" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json new file mode 100644 index 0000000000..2020c4b62e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json @@ -0,0 +1,35 @@ +{ + "type": "filament", + "name": "Flashforge ASA @FF AD5M 0.25 Nozzle", + "inherits": "Flashforge Generic ASA", + "from": "system", + "setting_id": "GFSA04_05", + "instantiation": "false", + "compatible_printers": [ + "Flashforge Adventurer 5M 0.25 Nozzle", + "Flashforge Adventurer 5M Pro 0.25 Nozzle" + ], + "filament_id": "GFL99", + "filament_settings_id": [ + "Flashforge ASA @FF AD5M 0.25 Nozzle" + ], + "fan_max_speed": [ + "50" + ], + "filament_cost": [ + "40" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "pressure_advance": [ + "0.1" + ], + "version": "1.8.0.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..92dda00ff4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge ASA Basic @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_05", + "instantiation": "true", + "inherits": "Flashforge ASA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..e4021a774f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_05", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge ASA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF AD5X 0.25 nozzle", + "nozzle_temperature_initial_layer": [ + "265" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..95cacc64b9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF AD5X 0.6 nozzle", + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..cd321e1129 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF AD5X 0.8 nozzle", + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json new file mode 100644 index 0000000000..34759ee743 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json @@ -0,0 +1,54 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF AD5X", + "nozzle_temperature": [ + "260" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..e0a0fb79c0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.25 nozzle.json @@ -0,0 +1,50 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "20" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4 0.25 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4 0.25 nozzle", + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..862bd0e145 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:ASA" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..1a313426f6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ASA" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..9580db8faf --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ASA" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json new file mode 100644 index 0000000000..49d80c487a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json @@ -0,0 +1,80 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "filament_type": [ + "ASA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4 HF", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json new file mode 100644 index 0000000000..196bada180 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json @@ -0,0 +1,59 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4", + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..d9e2e612ff --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.25 nozzle.json @@ -0,0 +1,74 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4P 0.25 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4P 0.25 nozzle", + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..32ac11be3e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:ASA" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..234c5d506f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ASA" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..e8e0631e3c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:ASA" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json new file mode 100644 index 0000000000..1cc1e03b49 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json @@ -0,0 +1,104 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "filament_type": [ + "ASA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4P HF", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "80" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json new file mode 100644 index 0000000000..6cdd323c74 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json @@ -0,0 +1,59 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_settings_id": [ + "Flashforge ASA Basic @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA\n" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA Basic @FF G4P", + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json new file mode 100644 index 0000000000..fe6a757acf --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Flashforge ASA Basic", + "inherits": "Flashforge Generic ASA", + "from": "system", + "filament_settings_id": [ + "Flashforge ASA Basic" + ], + "setting_id": "GFSA04_05", + "instantiation": "true", + "is_custom_defined": "0", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF G4.json new file mode 100644 index 0000000000..57faf8d9c5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF G4.json @@ -0,0 +1,59 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_settings_id": [ + "Flashforge ASA-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA-CF\n" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA-CF @FF G4", + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF G4P.json new file mode 100644 index 0000000000..3e4b06e112 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF G4P.json @@ -0,0 +1,59 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_settings_id": [ + "Flashforge ASA-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: ASA-CF\n" + ], + "filament_type": [ + "ASA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS", + "is_custom_defined": "0", + "name": "Flashforge ASA-CF @FF G4P", + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-CF.json b/resources/profiles/Flashforge/filament/Flashforge ASA-CF.json new file mode 100644 index 0000000000..05c9086af1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-CF.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Flashforge ASA-CF", + "inherits": "FusRock Generic PAHT-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge ASA-CF" + ], + "filament_type": [ + "ASA" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "20" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..82e6358b06 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..967cd87458 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..2e178f490b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json new file mode 100644 index 0000000000..4352df503e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json @@ -0,0 +1,53 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: HIPS\n" + ], + "filament_type": [ + "HIPS" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4 HF", + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json new file mode 100644 index 0000000000..36ee1b6ca1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json @@ -0,0 +1,104 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.04" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS\n" + ], + "filament_type": [ + "HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.036" + ], + "slow_down_layer_time": [ + "8" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..b352e7b233 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..4fb24dc7ff --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..30d1da7d8d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,110 @@ +{ + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "115" + ], + "eng_plate_temp_initial_layer": [ + "115" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "25" + ], + "filament_cost": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "115" + ], + "textured_plate_temp_initial_layer": [ + "115" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json new file mode 100644 index 0000000000..8ef2f41da2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json @@ -0,0 +1,77 @@ +{ + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: HIPS\n" + ], + "filament_type": [ + "HIPS" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4P HF", + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json new file mode 100644 index 0000000000..ac3e875b93 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json @@ -0,0 +1,104 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.04" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge HIPS @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:HIPS\n" + ], + "filament_type": [ + "HIPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge HIPS @FF G4P", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.036" + ], + "slow_down_layer_time": [ + "8" + ], + "support_material_interface_fan_speed": [ + "40" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..15aca674fa --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge HS PETG @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..87085dacdb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_min_speed": [ + "30" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..03e430c4f6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json @@ -0,0 +1,57 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "pressure_advance": [ + "0.04" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..43c4b5bb7f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json @@ -0,0 +1,57 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "pressure_advance": [ + "0.04" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json new file mode 100644 index 0000000000..6ea716e926 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json @@ -0,0 +1,58 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "pressure_advance": [ + "0.04" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..5421080d70 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..09e0f972d8 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json @@ -0,0 +1,92 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "40" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.68817 6.75269 6.43011 7.39785 11.957 17.6344 20 19.8925 19.8925 19.1398 13.5484 4.60215 0.215054 0.193548 0.473118 0.494624| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 19.8699 1.95 19.7215 2.45 19.0323 2.95 1.06237 3.45 0.245161 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "235" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..af612e2333 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..c18f77fc2f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json new file mode 100644 index 0000000000..2226738f2c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json @@ -0,0 +1,89 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PETG" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4 HF", + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.075" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "30" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "temperature_vitrification": [ + "70" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json new file mode 100644 index 0000000000..c15a9fd9ab --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json @@ -0,0 +1,62 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.08" + ], + "slow_down_layer_time": [ + "5" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..fc096cced7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.25 nozzle.json @@ -0,0 +1,77 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..514b610dd1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,92 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "40" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.68817 6.75269 6.43011 7.39785 11.957 17.6344 20 19.8925 19.8925 19.1398 13.5484 4.60215 0.215054 0.193548 0.473118 0.494624| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 19.8699 1.95 19.7215 2.45 19.0323 2.95 1.06237 3.45 0.245161 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "235" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..aa686f2063 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..86bc234f32 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json new file mode 100644 index 0000000000..61f4d69b94 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json @@ -0,0 +1,101 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PETG" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4P HF", + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.075" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "30" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "temperature_vitrification": [ + "70" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json new file mode 100644 index 0000000000..5d80b20d88 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json @@ -0,0 +1,62 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge HS PETG @FF G4P" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge HS PETG @FF G4P", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.08" + ], + "slow_down_layer_time": [ + "5" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG.json new file mode 100644 index 0000000000..3c0199e7a5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge HS PETG" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge HS PETG", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json new file mode 100644 index 0000000000..4a01aa1fb9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Flashforge HS PLA @FF AD5M 0.25 nozzle", + "inherits": "Flashforge Generic HS PLA", + "from": "system", + "setting_id": "GFSA04_09", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Adventurer 5M 0.25 Nozzle", + "Flashforge Adventurer 5M Pro 0.25 Nozzle" + ], + "filament_id": "GFL99", + "filament_settings_id": [ + "Flashforge HS PLA @FF AD5M 0.25 nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: HS PLA\n" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "210" + ], + "pressure_advance": [ + "0.1" + ], + "slow_down_min_speed": [ + "15" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..ad7a6104f9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..06b80df4f6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..744a9c9edc --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json new file mode 100644 index 0000000000..6e02ccaa3f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..a282545081 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.026" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..c0a8f97625 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "43" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 9.50538 9.56989 9.39785 10.2366 13.7634 18.129 19.9355 19.8495 19.8925 19.3548 13.6559 4.32258 0.0430108 0.301075 0.645161 0.55914| 0.05 9.43871 0.45 9.5957 0.95 10.5957 1.45 19.6978 1.95 19.6355 2.45 19.5484 2.95 0.417204 3.45 0.417204 3.95 0.417204 4.45 0.288172 4.95 0.245161" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4 0.6 HF nozzle", + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..941adfed7a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..bf60e66447 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json new file mode 100644 index 0000000000..a15457e50f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json @@ -0,0 +1,98 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.031" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json new file mode 100644 index 0000000000..e69729819c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..35cfe1fdc5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.026" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..cdb108cc3e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "43" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 9.50538 9.56989 9.39785 10.2366 13.7634 18.129 19.9355 19.8495 19.8925 19.3548 13.6559 4.32258 0.0430108 0.301075 0.645161 0.55914| 0.05 9.43871 0.45 9.5957 0.95 10.5957 1.45 19.6978 1.95 19.6355 2.45 19.5484 2.95 0.417204 3.45 0.417204 3.95 0.417204 4.45 0.288172 4.95 0.245161" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4P 0.6 HF nozzle", + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..b62c7b8684 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..4758f99203 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json new file mode 100644 index 0000000000..ac62ded84e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json @@ -0,0 +1,116 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.031" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json new file mode 100644 index 0000000000..8e57fa7733 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge HS PLA @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge HS PLA @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..ccd6231db1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 9.87097 10.129 10.129 10.9247 14.1505 18.1505 19.7634 19.7419 19.8925 19.5484 13.9785 4.45161 0.0430108 0.236559 0.473118 0.301075| 0.05 9.73979 0.45 10.2409 0.95 11.2409 1.45 19.5688 1.95 19.5925 2.45 19.9355 2.95 0.503226 3.45 0.331183 3.95 0.116129 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json new file mode 100644 index 0000000000..84ce00bf3f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json @@ -0,0 +1,98 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.031" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..9a16e36073 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 9.87097 10.129 10.129 10.9247 14.1505 18.1505 19.7634 19.7419 19.8925 19.5484 13.9785 4.45161 0.0430108 0.236559 0.473118 0.301075| 0.05 9.73979 0.45 10.2409 0.95 11.2409 1.45 19.5688 1.95 19.5925 2.45 19.9355 2.95 0.503226 3.45 0.331183 3.95 0.116129 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json new file mode 100644 index 0000000000..31b8deb620 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json @@ -0,0 +1,116 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.031" + ], + "slow_down_layer_time": [ + "4" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..68c3bbeb75 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..1c45bbc2ae --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..5abe08f9a9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..89c4620016 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA.json new file mode 100644 index 0000000000..48fa9c5276 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge HS PLA" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge HS PLA", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..b0da411e47 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json @@ -0,0 +1,119 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_density": [ + "1.04" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PA @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PA\n\n\n" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "105" + ], + "hot_plate_temp_initial_layer": [ + "105" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PA @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "295" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.023" + ], + "slow_down_layer_time": [ + "8" + ], + "support_material_interface_fan_speed": [ + "80" + ], + "temperature_vitrification": [ + "108" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json new file mode 100644 index 0000000000..57cf18f00b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json @@ -0,0 +1,89 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PA @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PA\n" + ], + "filament_type": [ + "PA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PA @FF G4 HF", + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.02" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "110" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json new file mode 100644 index 0000000000..d4ff81a355 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json @@ -0,0 +1,89 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PA @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA\n" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge PA @FF G4", + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "pressure_advance": [ + "0.02" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..195ee46d5d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,119 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_density": [ + "1.04" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PA @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PA\n\n\n" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "105" + ], + "hot_plate_temp_initial_layer": [ + "105" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PA @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "295" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.023" + ], + "slow_down_layer_time": [ + "8" + ], + "support_material_interface_fan_speed": [ + "80" + ], + "temperature_vitrification": [ + "108" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json new file mode 100644 index 0000000000..fca8702c4f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PA @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PA\n" + ], + "filament_type": [ + "PA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PA @FF G4P HF", + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.02" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "110" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json new file mode 100644 index 0000000000..61bc382d5d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json @@ -0,0 +1,89 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PA @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA\n" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge PA @FF G4P", + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "pressure_advance": [ + "0.02" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json new file mode 100644 index 0000000000..78cc8fee8e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PA-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA-CF\n" + ], + "filament_type": [ + "PA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PA-CF @FF G4", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "180" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json new file mode 100644 index 0000000000..070fa8282b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PA-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA-CF\n" + ], + "filament_type": [ + "PA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PA-CF @FF G4P", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "180" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA12-CF.json b/resources/profiles/Flashforge/filament/Flashforge PA12-CF.json new file mode 100644 index 0000000000..7dbd81db30 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA12-CF.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "name": "Flashforge PA12-CF", + "inherits": "FusRock Generic PET-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_density": [ + "1.1" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PA12-CF" + ], + "filament_type": [ + "PA-CF" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA6-CF.json b/resources/profiles/Flashforge/filament/Flashforge PA6-CF.json new file mode 100644 index 0000000000..3bedb724f0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA6-CF.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Flashforge PA6-CF", + "inherits": "FusRock Generic PET-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_density": [ + "1.1" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PA6-CF" + ], + "filament_type": [ + "PA6-CF" + ], + "hot_plate_temp": [ + "95" + ], + "hot_plate_temp_initial_layer": [ + "95" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PA66-CF.json b/resources/profiles/Flashforge/filament/Flashforge PA66-CF.json new file mode 100644 index 0000000000..25aa934c3b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PA66-CF.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Flashforge PA66-CF", + "inherits": "FusRock Generic PET-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_density": [ + "1.1" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PA66-CF" + ], + "filament_type": [ + "PA-CF" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PAHT-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PAHT-CF @FF G4.json new file mode 100644 index 0000000000..f4164da83e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PAHT-CF @FF G4.json @@ -0,0 +1,107 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PAHT-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA-CF\n" + ], + "filament_type": [ + "PA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PAHT-CF @FF G4", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "180" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PAHT-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PAHT-CF @FF G4P.json new file mode 100644 index 0000000000..30a7ed5432 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PAHT-CF @FF G4P.json @@ -0,0 +1,107 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PAHT-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA-CF\n" + ], + "filament_type": [ + "PA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PAHT-CF @FF G4P", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "180" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PET-CF.json b/resources/profiles/Flashforge/filament/Flashforge PET-CF.json new file mode 100644 index 0000000000..449ed25791 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PET-CF.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "name": "Flashforge PET-CF", + "inherits": "FusRock Generic PET-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_density": [ + "1.1" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PET-CF" + ], + "hot_plate_temp": [ + "80" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json new file mode 100644 index 0000000000..c2bd02e49f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "inherits": "Flashforge Generic PETG", + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "false", + "compatible_printers": [ + "Flashforge Adventurer 5M 0.25 Nozzle", + "Flashforge Adventurer 5M Pro 0.25 Nozzle" + ], + "filament_id": "GFG99", + "filament_settings_id": [ + "Flashforge PETG @FF AD5M 0.25 Nozzle" + ], + "fan_max_speed": [ + "80" + ], + "filament_max_volumetric_speed": [ + "1.5" + ], + "pressure_advance": [ + "0.1" + ], + "slow_down_min_speed": [ + "15" + ], + "version": "1.8.0.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Basic @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Basic @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..d239645d81 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Basic @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PETG Basic @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Basic @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json b/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json new file mode 100644 index 0000000000..af99bda27f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "additional_cooling_fan_speed": [ + "60" + ], + "filament_settings_id": [ + "Flashforge PETG Basic" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Basic", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..82fec2fb49 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PETG Pro @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..84f650a206 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.25 nozzle.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "30" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..71a7830475 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json @@ -0,0 +1,78 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "70" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..cfb310c0b5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json @@ -0,0 +1,75 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF AD5X 0.8 nozzle", + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json new file mode 100644 index 0000000000..8718e044d2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..880360a177 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.25 nozzle.json @@ -0,0 +1,47 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4 0.25 nozzle", + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..a57bbe92e9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.68817 6.75269 6.51613 7.54839 11.9355 17.5054 19.957 19.828 19.828 18.9892 13.0538 4.08602 0.0430108 0.387097 0.666667 0.344086| 0.05 6.6 0.45 6.8 0.95 7.97204 1.45 19.4828 1.95 19.5495 2.45 18.7742 2.95 0.331183 3.45 0.632258 3.95 0.116129 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "235" + ], + "overhang_fan_speed": [ + "100" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..89886df2f9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..3501e97be3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json new file mode 100644 index 0000000000..e7575c6380 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json @@ -0,0 +1,92 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PETG\n" + ], + "filament_type": [ + "PETG" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4 HF", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "30" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "temperature_vitrification": [ + "70" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json new file mode 100644 index 0000000000..2a389fc09d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json @@ -0,0 +1,56 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4", + "pressure_advance": [ + "0.08" + ], + "slow_down_layer_time": [ + "5" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..b682cbc763 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.25 nozzle.json @@ -0,0 +1,71 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4P 0.25 nozzle", + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..e06a99c976 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.68817 6.75269 6.51613 7.54839 11.9355 17.5054 19.957 19.828 19.828 18.9892 13.0538 4.08602 0.0430108 0.387097 0.666667 0.344086| 0.05 6.6 0.45 6.8 0.95 7.97204 1.45 19.4828 1.95 19.5495 2.45 18.7742 2.95 0.331183 3.45 0.632258 3.95 0.116129 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "235" + ], + "overhang_fan_speed": [ + "100" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..3a4f3b6de2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..33a74f6992 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json new file mode 100644 index 0000000000..56299666d1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json @@ -0,0 +1,104 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PETG\n" + ], + "filament_type": [ + "PETG" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4P HF", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "30" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "temperature_vitrification": [ + "70" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json new file mode 100644 index 0000000000..9457d0e726 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json @@ -0,0 +1,56 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge PETG Pro @FF G4P" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro @FF G4P", + "pressure_advance": [ + "0.08" + ], + "slow_down_layer_time": [ + "5" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json new file mode 100644 index 0000000000..6fd513c95c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "additional_cooling_fan_speed": [ + "60" + ], + "filament_settings_id": [ + "Flashforge PETG Pro" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Pro", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..1bcf72341d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PETG Transparent @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..d91b942906 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.25 nozzle.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_12", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "30" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..fdf71affea --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json @@ -0,0 +1,78 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "70" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..73edb6e260 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json @@ -0,0 +1,75 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF AD5X 0.8 nozzle", + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json new file mode 100644 index 0000000000..8bfded333f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "close_fan_the_first_x_layers": [ + "2" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..2ddde34121 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.25 nozzle.json @@ -0,0 +1,47 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4 0.25 nozzle", + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..94fce06a99 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.68817 6.75269 6.51613 7.54839 11.9355 17.5054 19.957 19.828 19.828 18.9892 13.0538 4.08602 0.0430108 0.387097 0.666667 0.344086| 0.05 6.6 0.45 6.8 0.95 7.97204 1.45 19.4828 1.95 19.5495 2.45 18.7742 2.95 0.331183 3.45 0.632258 3.95 0.116129 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "235" + ], + "overhang_fan_speed": [ + "100" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..9314d20f87 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..7fc3e2482f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json new file mode 100644 index 0000000000..9d9e987312 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json @@ -0,0 +1,92 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PETG\n" + ], + "filament_type": [ + "PETG" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4 HF", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "30" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "temperature_vitrification": [ + "70" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json new file mode 100644 index 0000000000..8be7e0e780 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json @@ -0,0 +1,56 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4", + "pressure_advance": [ + "0.08" + ], + "slow_down_layer_time": [ + "5" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..0fbdf18bee --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json @@ -0,0 +1,71 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4P 0.25 nozzle", + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "0" + ], + "textured_cool_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..2b3f9834cc --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.68817 6.75269 6.51613 7.54839 11.9355 17.5054 19.957 19.828 19.828 18.9892 13.0538 4.08602 0.0430108 0.387097 0.666667 0.344086| 0.05 6.6 0.45 6.8 0.95 7.97204 1.45 19.4828 1.95 19.5495 2.45 18.7742 2.95 0.331183 3.45 0.632258 3.95 0.116129 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "235" + ], + "overhang_fan_speed": [ + "100" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..16308e2246 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..5146750a33 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json new file mode 100644 index 0000000000..d3edbd751e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json @@ -0,0 +1,104 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PETG\n" + ], + "filament_type": [ + "PETG" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4P HF", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "overhang_fan_speed": [ + "80" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "30" + ], + "support_material_interface_fan_speed": [ + "90" + ], + "temperature_vitrification": [ + "70" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json new file mode 100644 index 0000000000..ca96495a52 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json @@ -0,0 +1,56 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent @FF G4P" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent @FF G4P", + "pressure_advance": [ + "0.08" + ], + "slow_down_layer_time": [ + "5" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json new file mode 100644 index 0000000000..74e14bcb88 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "additional_cooling_fan_speed": [ + "60" + ], + "filament_settings_id": [ + "Flashforge PETG Transparent" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG Transparent", + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..9e04b922bc --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF AD5X 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG-CF\n" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG-CF10", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF AD5X 0.6 nozzle", + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..5e0809480e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF AD5X 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG-CF\n" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG-CF10", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF AD5X 0.8 nozzle", + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json new file mode 100644 index 0000000000..824f358e81 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF AD5X" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG-CF\n" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "inherits": "Flashforge Generic PETG-CF10", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "240" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..6e0aba052a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json new file mode 100644 index 0000000000..640773a232 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json @@ -0,0 +1,71 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode \n;right_extruder_material:PETG-CF" + ], + "filament_type": [ + "PETG-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF G4", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.075" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..9a2ef8dbc0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "65" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PETG" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "265" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json new file mode 100644 index 0000000000..a17401238a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json @@ -0,0 +1,71 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_settings_id": [ + "Flashforge PETG-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode \n;right_extruder_material:PETG-CF" + ], + "filament_type": [ + "PETG-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic PETG", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF @FF G4P", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "pressure_advance": [ + "0.075" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json new file mode 100644 index 0000000000..e6aed65066 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PETG-CF" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PETG-CF10", + "is_custom_defined": "0", + "name": "Flashforge PETG-CF", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json new file mode 100644 index 0000000000..df8dd072b0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json @@ -0,0 +1,49 @@ +{ + "type": "filament", + "name": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "inherits": "Flashforge Generic PLA", + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "false", + "compatible_printers": [ + "Flashforge Adventurer 5M 0.25 Nozzle", + "Flashforge Adventurer 5M Pro 0.25 Nozzle" + ], + "filament_settings_id": [ + "Flashforge PLA @FF AD5M 0.25 Nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2.8" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "15" + ], + "version": "1.8.0.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..b80437afda --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Basic @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..b23b196dce --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..0d4635ae83 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "9" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..ab0c285a24 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "9" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json new file mode 100644 index 0000000000..5edca78019 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..47b03cc69e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..b8fc1b44e4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..62e6e1f26f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4 0.6 nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..9c5c0b79f1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json new file mode 100644 index 0000000000..4d416a6fd7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json new file mode 100644 index 0000000000..70d9530282 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..a3e71717a4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..5fb6cfd68a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..b9fd73495c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4P 0.6 nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..d37ca80461 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4P 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json new file mode 100644 index 0000000000..6a52d334cc --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json new file mode 100644 index 0000000000..cafd33b31d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Basic @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json new file mode 100644 index 0000000000..30d0a8680a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Basic" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Basic", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Buint Ti @FF G4 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Buint Ti @FF G4 0.8 nozzle.json new file mode 100644 index 0000000000..bff51b2995 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Buint Ti @FF G4 0.8 nozzle.json @@ -0,0 +1,92 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Buint Ti @FF G4 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Buint Ti @FF G4 0.8 nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Buint Ti @FF G4P 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Buint Ti @FF G4P 0.8 nozzle.json new file mode 100644 index 0000000000..f17c8d789d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Buint Ti @FF G4P 0.8 nozzle.json @@ -0,0 +1,92 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Buint Ti @FF G4P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Buint Ti @FF G4P 0.8 nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..a9fc911987 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Color Change @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..d7012e081b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..0e080ca279 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..23e0a4b542 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json new file mode 100644 index 0000000000..07b00cb8f9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..6edb256c06 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..b453ed40cb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..e46c1753b9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4 0.6 nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..6fe7b793b2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json new file mode 100644 index 0000000000..dc58aaeb92 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json new file mode 100644 index 0000000000..97e4ca62ef --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..fc63de347a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..651b320076 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..12410de9d4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4P 0.6 nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..9e529749ce --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4P 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json new file mode 100644 index 0000000000..2e5058cf6c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json new file mode 100644 index 0000000000..17ea415cab --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Color Change @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json new file mode 100644 index 0000000000..93d1c43114 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Color Change" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Color Change", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..c41d2faa08 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..5af54993f5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..a5fd70b302 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..dcb8e89020 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json new file mode 100644 index 0000000000..540ad63b33 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..cdbc27e43e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..dcd573b8eb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..c748b853dc --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..5c2d473ffe --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json new file mode 100644 index 0000000000..cd8d4c3cd1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json new file mode 100644 index 0000000000..7f51358df7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..774624ab49 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..0c8b6ec144 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..1e2d60220b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..63e60d0da2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json new file mode 100644 index 0000000000..7d4213823e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json new file mode 100644 index 0000000000..9d853a2873 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Galaxy @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json new file mode 100644 index 0000000000..c2c8ef9133 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Galaxy" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Galaxy", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..ca63379b67 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Luminous @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..893fb46ba1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..007bb22964 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..1225c57238 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json new file mode 100644 index 0000000000..ac90482671 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..ec36dc6372 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..f8fc05313f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..78a6e8cfe3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json new file mode 100644 index 0000000000..aa61bf4218 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json new file mode 100644 index 0000000000..f721dd3812 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..c1c6640349 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..4af9caec1a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..e9cef8b3b3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4P 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json new file mode 100644 index 0000000000..933fcc971b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json new file mode 100644 index 0000000000..46ac96e44c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Luminous @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json new file mode 100644 index 0000000000..4c24f116a1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Luminous" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Luminous", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..e790cfd512 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Matte @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..49292b1e12 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..8590e61340 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..6866d9183e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json new file mode 100644 index 0000000000..3f8bf2bc9c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..3dad7fa731 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..be96ce5384 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..43eb7dcf97 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..c414b4ff76 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json new file mode 100644 index 0000000000..ffe2138965 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json new file mode 100644 index 0000000000..287eb04908 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..46f2936a87 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..58c3956e5e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..a75efcb573 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..de3fdc3606 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json new file mode 100644 index 0000000000..eda286fa70 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json new file mode 100644 index 0000000000..13a40602e9 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Matte @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json new file mode 100644 index 0000000000..1955a67e88 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json @@ -0,0 +1,15 @@ +{ + "filament_max_volumetric_speed": [ + "22" + ], + "filament_settings_id": [ + "Flashforge PLA Matte" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Matte", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..9ecca13498 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Metal @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..02bb6eca70 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..625d511e74 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..d2ea48d2f4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json new file mode 100644 index 0000000000..3b102843df --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..6e0a097737 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..433d8be3fb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..5bad67534d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..d958f8e4eb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json new file mode 100644 index 0000000000..812ce954db --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json new file mode 100644 index 0000000000..996ca6b747 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..c80feeb448 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..65655cc54b --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..c086a89573 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..74514bcf0a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json new file mode 100644 index 0000000000..7a974c9f31 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json new file mode 100644 index 0000000000..f3180b9fd2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Metal @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json new file mode 100644 index 0000000000..de6dbc3a72 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Metal" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Metal", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..53c7b96061 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Pro @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..6d6af35109 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..cf9f9082e2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..cb618c268a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json new file mode 100644 index 0000000000..819837f314 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..136b0ebe01 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..99f2e0fdfb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.027" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..a07cf90be7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.028" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..c4960228d2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.028" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json new file mode 100644 index 0000000000..1a4df02c9d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json new file mode 100644 index 0000000000..f982e3e4af --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..e2ae8fbcf7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..2406740428 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.027" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..cbc09a8380 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.028" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..6a3100aac3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.028" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json new file mode 100644 index 0000000000..a58ece6846 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json new file mode 100644 index 0000000000..aad4d2a8d7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Pro @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json new file mode 100644 index 0000000000..8f2edc787a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Pro" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Pro", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..314ac9230d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Silk @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_25", + "instantiation": "true", + "inherits": "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..c2aabaa9c3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json @@ -0,0 +1,70 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF AD5X 0.25 nozzle" + ], + "filament_type": [ + "SILK" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..1ac2e41462 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json @@ -0,0 +1,54 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF AD5X 0.6 nozzle" + ], + "filament_type": [ + "SILK" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA-Silk", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "pressure_advance": [ + "0.027" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..bc16a9b99e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json @@ -0,0 +1,54 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF AD5X 0.8 nozzle" + ], + "filament_type": [ + "SILK" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA-Silk", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "pressure_advance": [ + "0.027" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json new file mode 100644 index 0000000000..9e3be0eb17 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF AD5X" + ], + "filament_type": [ + "SILK" + ], + "from": "system", + "instantiation": "true", + "setting_id": "GFSA04", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA-Silk", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.027" + ], + "textured_cool_plate_temp": [ + "50" + ], + "textured_cool_plate_temp_initial_layer": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..6ae7bd5943 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..6a3cabc392 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 9.95699 10.0645 9.54839 9.80645 13.1183 17.7419 19.828 19.7204 19.7849 19.0538 13.8065 5.52688 0.795699 0.150538 0.344086 0.344086| 0.05 9.82581 0.45 10.1548 0.95 9.95054 1.45 19.3968 1.95 19.4634 2.45 18.8172 2.95 2.22366 3.45 0.20215 3.95 0.288172 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..b535255268 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..4557b207de --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json @@ -0,0 +1,89 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json new file mode 100644 index 0000000000..730bdce431 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4 HF", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.026" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json new file mode 100644 index 0000000000..f6b28801db --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json @@ -0,0 +1,71 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..f54e4e5138 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..3aff03c758 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 9.95699 10.0645 9.54839 9.80645 13.1183 17.7419 19.828 19.7204 19.7849 19.0538 13.8065 5.52688 0.795699 0.150538 0.344086 0.344086| 0.05 9.82581 0.45 10.1548 0.95 9.95054 1.45 19.3968 1.95 19.4634 2.45 18.8172 2.95 2.22366 3.45 0.20215 3.95 0.288172 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..1df6431fa0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..12c785c990 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,89 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json new file mode 100644 index 0000000000..018df27caa --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4P HF", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.026" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json new file mode 100644 index 0000000000..1bc47110e2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json @@ -0,0 +1,71 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Silk @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk @FF G4P", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json new file mode 100644 index 0000000000..2b8d24ba84 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Silk" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA-Silk", + "is_custom_defined": "0", + "name": "Flashforge PLA Silk", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json new file mode 100644 index 0000000000..b456bb6434 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json new file mode 100644 index 0000000000..167084b3f5 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle" + ], + "from": "system", + "setting_id": "GFSA04_19", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.25 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..38a1b08221 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..a1b430047a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json new file mode 100644 index 0000000000..cfaa07c76d --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.0325" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..d4afe5a7ba --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json @@ -0,0 +1,53 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..829a9a5c21 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..da2640e2e4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4 0.6 nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json new file mode 100644 index 0000000000..f0e35d0221 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4 HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4 HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json new file mode 100644 index 0000000000..79e461a671 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..f9467e01dc --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4P 0.25 nozzle" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..bfa7e2d942 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,83 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 11.2043 11.2258 11.0108 11.5269 14.129 17.5699 19.2903 19.6129 19.871 18.9462 13.3118 4.66667 0.322581 0.215054 0.494624 0.494624| 0.05 11.1591 0.45 11.2301 0.95 11.757 1.45 18.7946 1.95 19.5925 2.45 18.6882 2.95 1.27742 3.45 0.288172 3.95 0.417204 4.45 7.6 4.95 7.6" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..6a798eacc6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4P 0.6 nozzle", + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json new file mode 100644 index 0000000000..98f9661f06 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json @@ -0,0 +1,113 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "49" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4P HF" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA\n" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "Flashforge Generic ABS @G3U", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4P HF", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.032" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json new file mode 100644 index 0000000000..ba3e805689 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json @@ -0,0 +1,65 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_settings_id": [ + "Flashforge PLA Sparkle @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA\n" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle @FF G4P", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json new file mode 100644 index 0000000000..aa3427c1f0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA Sparkle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA Sparkle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..3465965478 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF AD5X 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA-CF\n" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF AD5X 0.6 nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..9e03bd01fb --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json @@ -0,0 +1,45 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF AD5X 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA-CF\n" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json new file mode 100644 index 0000000000..da8507f38f --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json @@ -0,0 +1,49 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF AD5X" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA-CF\n" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..b7bf2b7992 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic PLA-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF G4 0.6 nozzle", + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json new file mode 100644 index 0000000000..94b6427ee0 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json @@ -0,0 +1,68 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA-CF\n" + ], + "filament_type": [ + "PLA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF G4", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.015" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..77b80fe726 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic PLA-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF G4P 0.6 nozzle", + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json new file mode 100644 index 0000000000..3e2eab5fec --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json @@ -0,0 +1,68 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_settings_id": [ + "Flashforge PLA-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PLA-CF\n" + ], + "filament_type": [ + "PLA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "inherits": "Flashforge Generic HS PLA", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF @FF G4P", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.045" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json new file mode 100644 index 0000000000..e37e5cdb6e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge PLA-CF" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PLA-CF", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json new file mode 100644 index 0000000000..108b45d39e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle", + "inherits": "Flashforge Generic PLA-Silk", + "from": "system", + "setting_id": "GFSA04_25", + "instantiation": "false", + "compatible_printers": [ + "Flashforge Adventurer 5M 0.25 Nozzle", + "Flashforge Adventurer 5M Pro 0.25 Nozzle" + ], + "filament_id": "GFL99", + "filament_settings_id": [ + "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2.8" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material: PLA-Silk\n" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "217" + ], + "pressure_advance": [ + "0.1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "15" + ], + "version": "1.8.0.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPA-CF.json b/resources/profiles/Flashforge/filament/Flashforge PPA-CF.json new file mode 100644 index 0000000000..8a40cb7709 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPA-CF.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Flashforge PPA-CF", + "inherits": "FusRock Generic PAHT-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPA-CF" + ], + "filament_type": [ + "PPA-CF" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "20" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPA-GF.json b/resources/profiles/Flashforge/filament/Flashforge PPA-GF.json new file mode 100644 index 0000000000..043016af4c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPA-GF.json @@ -0,0 +1,58 @@ +{ + "type": "filament", + "name": "Flashforge PPA-GF", + "inherits": "FusRock Generic PAHT-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "1.03" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPA-GF" + ], + "filament_type": [ + "PPA-GF" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "20" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json new file mode 100644 index 0000000000..4ab6ec64cf --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json @@ -0,0 +1,113 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPS @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS\n" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PPS @FF G4", + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "30" + ], + "temperature_vitrification": [ + "125" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json new file mode 100644 index 0000000000..e5a916bb33 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json @@ -0,0 +1,113 @@ +{ + "activate_chamber_temp_control": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPS @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS\n" + ], + "filament_type": [ + "PPS" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PPS @FF G4P", + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "30" + ], + "temperature_vitrification": [ + "125" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4.json new file mode 100644 index 0000000000..1f472e4393 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPS-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS-CF\n" + ], + "filament_type": [ + "PPS-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PPS-CF @FF G4", + "nozzle_temperature": [ + "310" + ], + "nozzle_temperature_initial_layer": [ + "310" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "30" + ], + "temperature_vitrification": [ + "220" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P.json new file mode 100644 index 0000000000..98a1389230 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P.json @@ -0,0 +1,107 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPS-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PPS-CF\n" + ], + "filament_type": [ + "PPS-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "Flashforge PPS-CF @FF G4P", + "nozzle_temperature": [ + "310" + ], + "nozzle_temperature_initial_layer": [ + "310" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "30" + ], + "temperature_vitrification": [ + "220" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF.json new file mode 100644 index 0000000000..d89cbfd63a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Flashforge PPS-CF", + "inherits": "FusRock Generic PAHT-CF", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_settings_id": [ + "Flashforge PPS-CF" + ], + "filament_type": [ + "PPS-CF" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "is_custom_defined": "0", + "nozzle_temperature": [ + "305" + ], + "nozzle_temperature_initial_layer": [ + "305" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "20" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "20" + ], + "version": "2.0.2.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..0d756b4811 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json @@ -0,0 +1,113 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.62366 6.75269 6.98925 7.5914 8.94624 10.9892 13.2903 15.2043 16.129 16.2366 16.1505 16.1075 16.0645 16.0215 16.0215 16.0215 15.957 15.8495 15.8065 15.8495| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 11.7839 1.95 15.8075 2.45 16.1936 2.95 16.1162 3.45 16.0301 3.95 16.0301 4.45 15.8151 4.95 15.9011" + ], + "filament_settings_id": [ + "Flashforge TPU 65D @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:TPU" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 65D @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "30" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..3658888770 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 65D @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 65D @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..c023f870e3 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 65D @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 65D @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..ac43de6993 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,113 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.62366 6.75269 6.98925 7.5914 8.94624 10.9892 13.2903 15.2043 16.129 16.2366 16.1505 16.1075 16.0645 16.0215 16.0215 16.0215 15.957 15.8495 15.8065 15.8495| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 11.7839 1.95 15.8075 2.45 16.1936 2.95 16.1162 3.45 16.0301 3.95 16.0301 4.45 15.8151 4.95 15.9011" + ], + "filament_settings_id": [ + "Flashforge TPU 65D @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:TPU" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 65D @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "30" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..29923150e2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 65D @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 65D @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..bc79045864 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 65D @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 65D @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..6de2f23400 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF AD5X 0.6 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF AD5X 0.6 nozzle", + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..799f714798 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json @@ -0,0 +1,54 @@ +{ + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF AD5X 0.8 nozzle" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF AD5X 0.8 nozzle", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json new file mode 100644 index 0000000000..e154fa0b7a --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json @@ -0,0 +1,43 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF AD5X" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF AD5X", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..65affc8ba1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json @@ -0,0 +1,113 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.62366 6.75269 6.98925 7.5914 8.94624 10.9892 13.2903 15.2043 16.129 16.2366 16.1505 16.1075 16.0645 16.0215 16.0215 16.0215 15.957 15.8495 15.8065 15.8495| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 11.7839 1.95 15.8075 2.45 16.1936 2.95 16.1162 3.45 16.0301 3.95 16.0301 4.45 15.8151 4.95 15.9011" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:TPU" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "30" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..b942a55611 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4 0.6 nozzle", + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..94c35aef67 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json @@ -0,0 +1,95 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json new file mode 100644 index 0000000000..a68392bcb4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..592b0d6dca --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,113 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "105 105 6.62366 6.75269 6.98925 7.5914 8.94624 10.9892 13.2903 15.2043 16.129 16.2366 16.1505 16.1075 16.0645 16.0215 16.0215 16.0215 15.957 15.8495 15.8065 15.8495| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 11.7839 1.95 15.8075 2.45 16.1936 2.95 16.1162 3.45 16.0301 3.95 16.0301 4.45 15.8151 4.95 15.9011" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:TPU" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "30" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..60567d3805 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4P 0.6 nozzle", + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..6ce2a66b29 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,95 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:TPU\n\n" + ], + "filament_type": [ + "TPU" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4P 0.8 HF nozzle", + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json new file mode 100644 index 0000000000..6aa8075ce1 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json @@ -0,0 +1,62 @@ +{ + "additional_cooling_fan_speed": [ + "40" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Flashforge TPU 95A @FF G4P" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A @FF G4P", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json new file mode 100644 index 0000000000..ace1cfaa19 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json @@ -0,0 +1,12 @@ +{ + "filament_settings_id": [ + "Flashforge TPU 95A" + ], + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Flashforge TPU 95A", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..431803aea8 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.6 HF nozzle.json @@ -0,0 +1,62 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT @FF G4 0.6 HF nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..58fe29599a --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PAHT" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT @FF G4 0.6 nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..ceaaf67306 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4 0.8 HF nozzle.json @@ -0,0 +1,62 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT @FF G4 0.8 HF nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..60073321fe --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,62 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT @FF G4P 0.6 HF nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..a604be0649 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PAHT" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT @FF G4P 0.6 nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..3ebcc1d7fd --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,62 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "75" + ], + "eng_plate_temp_initial_layer": [ + "75" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT @FF G4P 0.8 HF nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "75" + ], + "textured_cool_plate_temp_initial_layer": [ + "75" + ], + "textured_plate_temp": [ + "75" + ], + "textured_plate_temp_initial_layer": [ + "75" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..786458d913 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4 0.6 nozzle.json @@ -0,0 +1,71 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT-CF @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PAHT-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT-CF @FF G4 0.6 nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json new file mode 100644 index 0000000000..418bccbd9a --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "FusRock PAHT-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA-CF\n" + ], + "filament_type": [ + "PA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "FusRock PAHT-CF @FF G4", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "180" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..e0c1bf9ade --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P 0.6 nozzle.json @@ -0,0 +1,71 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PAHT-CF @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PAHT-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PAHT-CF @FF G4P 0.6 nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json new file mode 100644 index 0000000000..fb252489c6 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json @@ -0,0 +1,101 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "FusRock PAHT-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA-CF\n" + ], + "filament_type": [ + "PA-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "Flashforge Generic PLA-CF10", + "is_custom_defined": "0", + "name": "FusRock PAHT-CF @FF G4P", + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "2" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "180" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..d30175272d --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,53 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "filament_load_time": [ + "29" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PET @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "filament_unload_time": [ + "29" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PET @FF G4P 0.8 HF nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..41a6707ce4 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4 0.6 nozzle.json @@ -0,0 +1,62 @@ +{ + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PET-CF @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PET-CF @FF G4 0.6 nozzle", + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4.json b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4.json new file mode 100644 index 0000000000..00c4595b9b --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4.json @@ -0,0 +1,95 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "10" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "FusRock PET-CF @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET-CF\n" + ], + "filament_type": [ + "PET-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "FusRock PET-CF @FF G4", + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "6" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..d7f6c5ffa2 --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4P 0.6 nozzle.json @@ -0,0 +1,62 @@ +{ + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "FusRock PET-CF @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "FusRock PET-CF @FF G4P 0.6 nozzle", + "slow_down_min_speed": [ + "20" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4P.json b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4P.json new file mode 100644 index 0000000000..b9d88f938b --- /dev/null +++ b/resources/profiles/Flashforge/filament/FusRock PET-CF @FF G4P.json @@ -0,0 +1,95 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "10" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_settings_id": [ + "FusRock PET-CF @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET-CF\n" + ], + "filament_type": [ + "PET-CF" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "FusRock PET-CF @FF G4P", + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "6" + ], + "support_material_interface_fan_speed": [ + "60" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..d107ccfb5c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.6 HF nozzle.json @@ -0,0 +1,77 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Generic PET @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..01e5b38d7e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Generic PET @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..b213554847 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4 0.8 HF nozzle.json @@ -0,0 +1,77 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Generic PET @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4.json new file mode 100644 index 0000000000..858f17624e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4.json @@ -0,0 +1,80 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "10" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "filament_density": [ + "1.4" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET\n" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Generic PET @FF G4", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "6" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..9b461cc26c --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,77 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Generic PET @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..933faabdac --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.6 nozzle.json @@ -0,0 +1,80 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Generic PET @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..d249891bfd --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,77 @@ +{ + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n; right_extruder_material:PET" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Generic PET @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "80" + ], + "textured_cool_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic PET @FF G4P.json b/resources/profiles/Flashforge/filament/Generic PET @FF G4P.json new file mode 100644 index 0000000000..3f9bb3d5bd --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic PET @FF G4P.json @@ -0,0 +1,80 @@ +{ + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "10" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "filament_density": [ + "1.4" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_settings_id": [ + "Generic PET @FF G4P" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PET\n" + ], + "filament_type": [ + "PET" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Generic PET @FF G4P", + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_layer_time": [ + "6" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "80" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X 0.6 nozzle.json new file mode 100644 index 0000000000..94c784c3d7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X 0.6 nozzle.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Generic TPU 85A @FF AD5X 0.6 nozzle" + ], + "from": "system", + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Generic TPU 85A @FF AD5X 0.6 nozzle", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.6 nozzle" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X 0.8 nozzle.json new file mode 100644 index 0000000000..241b61739e --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X 0.8 nozzle.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "filament_settings_id": [ + "Generic TPU 85A @FF AD5X 0.8 nozzle" + ], + "from": "system", + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Generic TPU 85A @FF AD5X 0.8 nozzle", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.8 nozzle" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X.json b/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X.json new file mode 100644 index 0000000000..e89c896a54 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Generic TPU 85A @FF AD5X.json @@ -0,0 +1,58 @@ +{ + "type": "filament", + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "3.2" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_settings_id": [ + "Generic TPU 85A @FF AD5X" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "2.5" + ], + "from": "system", + "inherits": "Flashforge Generic TPU", + "is_custom_defined": "0", + "name": "Generic TPU 85A @FF AD5X", + "setting_id": "GFSA04", + "instantiation": "true", + "compatible_printers": [ + "Flashforge AD5X 0.4 nozzle" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..9d413f8b15 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.6 HF nozzle.json @@ -0,0 +1,89 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "50" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker CoPA @FF G4 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Polymaker CoPA @FF G4 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..91461077b7 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.6 nozzle.json @@ -0,0 +1,89 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "50" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker CoPA @FF G4 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Polymaker CoPA @FF G4 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..a20bb68172 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4 0.8 HF nozzle.json @@ -0,0 +1,89 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "50" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker CoPA @FF G4 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Polymaker CoPA @FF G4 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..c25546ff88 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,89 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "50" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker CoPA @FF G4P 0.6 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Polymaker CoPA @FF G4P 0.6 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..ecf1d1e537 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.6 nozzle.json @@ -0,0 +1,89 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "50" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker CoPA @FF G4P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Polymaker CoPA @FF G4P 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..a68b86e802 --- /dev/null +++ b/resources/profiles/Flashforge/filament/Polymaker CoPA @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,89 @@ +{ + "close_fan_the_first_x_layers": [ + "2" + ], + "complete_print_exhaust_fan_speed": [ + "40" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "40" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "50" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker CoPA @FF G4P 0.8 HF nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n;right_extruder_material:PA" + ], + "filament_type": [ + "PA" + ], + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle", + "is_custom_defined": "0", + "name": "Polymaker CoPA @FF G4P 0.8 HF nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "50" + ], + "textured_cool_plate_temp": [ + "45" + ], + "textured_cool_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/flashforge_g4_buildplate_model.stl b/resources/profiles/Flashforge/flashforge_g4_buildplate_model.stl new file mode 100644 index 0000000000..b598b41e16 Binary files /dev/null and b/resources/profiles/Flashforge/flashforge_g4_buildplate_model.stl differ diff --git a/resources/profiles/Flashforge/flashforge_g4pro_buildplate_model.stl b/resources/profiles/Flashforge/flashforge_g4pro_buildplate_model.stl new file mode 100644 index 0000000000..17c4c38888 Binary files /dev/null and b/resources/profiles/Flashforge/flashforge_g4pro_buildplate_model.stl differ diff --git a/resources/profiles/Flashforge/flashforge_g4pro_buildplate_texture.png b/resources/profiles/Flashforge/flashforge_g4pro_buildplate_texture.png new file mode 100644 index 0000000000..b405cfbb03 Binary files /dev/null and b/resources/profiles/Flashforge/flashforge_g4pro_buildplate_texture.png differ diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json new file mode 100644 index 0000000000..69e66739a6 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA" + ], + "default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "deretraction_speed": [ + "45" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Adventurer 5M Pro 0.25 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "700", + "600" + ], + "machine_max_speed_y": [ + "700", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.08" + ], + "name": "Flashforge Guider4 0.25 nozzle", + "nozzle_diameter": [ + "0.25" + ], + "nozzle_height": "2.5", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "printer_model": "Flashforge Guider4", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 0.25 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.25", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "5" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "-5" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "0", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "0", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.2.0.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.3" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json new file mode 100644 index 0000000000..d8d04b93ad --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U" + ], + "default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "deretraction_speed": [ + "45" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.4 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "700", + "600" + ], + "machine_max_speed_y": [ + "700", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "name": "Flashforge Guider4 0.4 HF nozzle", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "2.5", + "nozzle_hrc": "0", + "nozzle_type": "stainless_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "printer_model": "Flashforge Guider4", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 0.4 HF nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "5" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "-5" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "0", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json new file mode 100644 index 0000000000..d170a75c42 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "deretraction_speed": [ + "45" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Adventurer 5M Pro 0.4 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "700", + "600" + ], + "machine_max_speed_y": [ + "700", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "name": "Flashforge Guider4 0.4 nozzle", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "printer_model": "Flashforge Guider4", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 0.4 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "2.5" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json new file mode 100644 index 0000000000..e71ea4b345 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U 0.6 Nozzle" + ], + "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.6 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M104 S0\nM140 S0\nG1 E-2 F3600\nG0 X50 Y50 F30000\nM106 P101 S0\nM106 S0", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "50", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "40", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.15" + ], + "name": "Flashforge Guider4 0.6 HF nozzle", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "stainless_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "301", + "printer_model": "Flashforge Guider4", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 0.6 HF nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.6", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "3" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.2" + ], + "retraction_minimum_travel": [ + "2" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2.2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json new file mode 100644 index 0000000000..787eee69ad --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; change filament start", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U 0.6 Nozzle" + ], + "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.6 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": "", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M104 S0\nM140 S0\nG1 E-2 F3600\nG0 X50 Y50 F30000\nM106 P101 S0\nM106 S0", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "50", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "35", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.15" + ], + "name": "Flashforge Guider4 0.6 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "301", + "printer_model": "Flashforge Guider4", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 0.6 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.6", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "3" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.3" + ], + "retraction_minimum_travel": [ + "3" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json new file mode 100644 index 0000000000..d2b9c97631 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; change filament start", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U 0.6 Nozzle" + ], + "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.6 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": "", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M104 S0\nM140 S0\nG1 E-2 F3600\nG0 X50 Y50 F30000\nM106 P101 S0\nM106 S0", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "50", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "35", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.24" + ], + "name": "Flashforge Guider4 0.8 HF nozzle", + "nozzle_diameter": [ + "0.8" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "stainless_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "301", + "printer_model": "Flashforge Guider4", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 0.8 HF nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.6", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "3" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.5" + ], + "retraction_minimum_travel": [ + "3" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json new file mode 100644 index 0000000000..9697e7e531 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA" + ], + "default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "deretraction_speed": [ + "45" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Adventurer 5M Pro 0.25 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "700", + "600" + ], + "machine_max_speed_y": [ + "700", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.08" + ], + "name": "Flashforge Guider4 Pro 0.25 nozzle", + "nozzle_diameter": [ + "0.25" + ], + "nozzle_height": "2.5", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "printer_model": "Flashforge Guider4 Pro", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 Pro 0.25 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.25", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "2.5" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.2.0.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.3" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json new file mode 100644 index 0000000000..a75581e351 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U" + ], + "default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "deretraction_speed": [ + "45" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.4 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "700", + "600" + ], + "machine_max_speed_y": [ + "700", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "name": "Flashforge Guider4 Pro 0.4 HF nozzle", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "stainless_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "printer_model": "Flashforge Guider4 Pro", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 Pro 0.4 HF nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "2.5" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json new file mode 100644 index 0000000000..bfbb40ff96 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "deretraction_speed": [ + "45" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Adventurer 5M Pro 0.4 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "700", + "600" + ], + "machine_max_speed_y": [ + "700", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "name": "Flashforge Guider4 Pro 0.4 nozzle", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "printer_model": "Flashforge Guider4 Pro", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 Pro 0.4 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "2.5" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.1" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Normal Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json new file mode 100644 index 0000000000..d00b56cbe0 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U 0.6 Nozzle" + ], + "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.6 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M104 S0\nM140 S0\nG1 E-2 F3600\nG0 X50 Y50 F30000\nM106 P101 S0\nM106 S0", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "50", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "40", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.15" + ], + "name": "Flashforge Guider4 Pro 0.6 HF nozzle", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "stainless_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "301", + "printer_model": "Flashforge Guider4 Pro", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 Pro 0.6 HF nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.6", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "100%" + ], + "retract_length_toolchange": [ + "3" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.2" + ], + "retraction_minimum_travel": [ + "2" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2.2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..d2ebafae4a --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; change filament start", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U 0.6 Nozzle" + ], + "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.6 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": "", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M104 S0\nM140 S0\nG1 E-2 F3600\nG0 X50 Y50 F30000\nM106 P101 S0\nM106 S0", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "50", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "35", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.15" + ], + "name": "Flashforge Guider4 Pro 0.6 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "301", + "printer_model": "Flashforge Guider4 Pro", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 Pro 0.6 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.6", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "3" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.3" + ], + "retraction_minimum_travel": [ + "3" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json new file mode 100644 index 0000000000..01426a7f8e --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json @@ -0,0 +1,231 @@ +{ + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; change filament start", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Flashforge Generic PLA @G3U 0.6 Nozzle" + ], + "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "165", + "extruder_clearance_height_to_rod": "42", + "extruder_clearance_radius": "75", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "instantiation": "true", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "Flashforge Guider 3 Ultra 0.6 Nozzle", + "is_custom_defined": "0", + "layer_change_gcode": "", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M104 S0\nM140 S0\nG1 E-2 F3600\nG0 X50 Y50 F30000\nM106 P101 S0\nM106 S0", + "machine_load_filament_time": "50", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "30000", + "20000" + ], + "machine_max_acceleration_y": [ + "30000", + "20000" + ], + "machine_max_acceleration_z": [ + "50", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "35", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M25", + "machine_start_gcode": "START_GCODE\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z2 F6000\nG1 X2 Y150 F1800\nG1 Z0.3 F6000\nG1 Y2 E30 F1800\nT[initial_no_support_extruder]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "50", + "manual_filament_change": "0", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.24" + ], + "name": "Flashforge Guider4 Pro 0.8 HF nozzle", + "nozzle_diameter": [ + "0.8" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "stainless_steel", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "301", + "printer_model": "Flashforge Guider4 Pro", + "printer_notes": "", + "printer_settings_id": "Flashforge Guider4 Pro 0.8 HF nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.6", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "3" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "1.5" + ], + "retraction_minimum_travel": [ + "3" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "thumbnails": "140x110/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json new file mode 100644 index 0000000000..2673618b07 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Flashforge Guider4 Pro", + "model_id": "Flashforge-Guider4-Pro", + "nozzle_diameter": "0.25;0.4;0.4HF;0.6;0.6HF;0.8HF", + "machine_tech": "FFF", + "family": "Flashforge", + "bed_model": "flashforge_g4pro_buildplate_model.stl", + "bed_texture": "flashforge_g4pro_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Flashforge Generic PVA;Flashforge Generic HIPS;Flashforge Generic PETG-CF @G3U;Flashforge Generic PETG @G3U;Flashforge Generic PLA-CF @G3U;Flashforge Generic PLA @G3U;Flashforge Generic ASA @G3U;Flashforge Generic ABS @G3U;FusRock Generic PET-CF;FusRock Generic PAHT-CF;FusRock Generic NexPA-CF25;FusRock Generic S-Multi;FusRock Generic S-PAHT;Polymaker Generic CoPA;Polymaker Generic S1" +} diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4.json b/resources/profiles/Flashforge/machine/Flashforge Guider4.json new file mode 100644 index 0000000000..ea2fa99a36 --- /dev/null +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Flashforge Guider4", + "model_id": "Flashforge-Guider4", + "nozzle_diameter": "0.25;0.4;0.4HF;0.6;0.6HF;0.8HF", + "machine_tech": "FFF", + "family": "Flashforge", + "bed_model": "flashforge_g4pro_buildplate_model.stl", + "bed_texture": "flashforge_g4pro_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Flashforge Generic PVA;Flashforge Generic HIPS;Flashforge Generic PETG-CF @G3U;Flashforge Generic PETG @G3U;Flashforge Generic PLA-CF @G3U;Flashforge Generic PLA @G3U;Flashforge Generic ASA @G3U;Flashforge Generic ABS @G3U;FusRock Generic PET-CF;FusRock Generic PAHT-CF;FusRock Generic NexPA-CF25;FusRock Generic S-Multi;FusRock Generic S-PAHT;Polymaker Generic CoPA;Polymaker Generic S1" +} diff --git a/resources/profiles/Flashforge/process/0.10mm Standard @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.10mm Standard @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..35b8c03ff6 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.10mm Standard @FF G4 0.25 nozzle.json @@ -0,0 +1,29 @@ +{ + "bridge_acceleration": "10%", + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "gap_fill_target": "topbottom", + "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "50", + "is_custom_defined": "0", + "layer_height": "0.1", + "name": "0.10mm Standard @FF G4 0.25 nozzle", + "only_one_wall_top": "1", + "print_settings_id": "0.10mm Standard @FF G4 0.25 nozzle", + "resolution": "0.005", + "seam_gap": "5%", + "small_perimeter_speed": "10", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "version": "2.2.0.0", + "wall_loops": "3" +} diff --git a/resources/profiles/Flashforge/process/0.10mm Standard @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.10mm Standard @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..b93c26606e --- /dev/null +++ b/resources/profiles/Flashforge/process/0.10mm Standard @FF G4P 0.25 nozzle.json @@ -0,0 +1,37 @@ +{ + "bridge_acceleration": "10%", + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "50", + "is_custom_defined": "0", + "layer_height": "0.1", + "name": "0.10mm Standard @FF G4P 0.25 nozzle", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "15", + "print_settings_id": "0.10mm Standard @FF G4P 0.25 nozzle", + "seam_gap": "5%", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "version": "2.2.0.0", + "wall_loops": "3", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.12mm Standard @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.12mm Standard @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..5cc976b795 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.12mm Standard @FF G4 0.25 nozzle.json @@ -0,0 +1,28 @@ +{ + "bridge_acceleration": "10%", + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "gap_fill_target": "topbottom", + "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "50", + "is_custom_defined": "0", + "name": "0.12mm Standard @FF G4 0.25 nozzle", + "only_one_wall_top": "1", + "print_settings_id": "0.12mm Standard @FF G4 0.25 nozzle", + "resolution": "0.005", + "seam_gap": "5%", + "small_perimeter_speed": "10", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "version": "2.2.0.0", + "wall_loops": "3" +} diff --git a/resources/profiles/Flashforge/process/0.12mm Standard @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.12mm Standard @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..da942d8837 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.12mm Standard @FF G4P 0.25 nozzle.json @@ -0,0 +1,36 @@ +{ + "bridge_acceleration": "10%", + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "50", + "is_custom_defined": "0", + "name": "0.12mm Standard @FF G4P 0.25 nozzle", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "15", + "print_settings_id": "0.12mm Standard @FF G4P 0.25 nozzle", + "seam_gap": "5%", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "version": "2.2.0.0", + "wall_loops": "3", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.14mm Standard @FF G4 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.14mm Standard @FF G4 0.25 nozzle.json new file mode 100644 index 0000000000..423d0652b1 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.14mm Standard @FF G4 0.25 nozzle.json @@ -0,0 +1,29 @@ +{ + "bridge_acceleration": "10%", + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.25 nozzle" + ], + "gap_fill_target": "topbottom", + "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "50", + "is_custom_defined": "0", + "layer_height": "0.14", + "name": "0.14mm Standard @FF G4 0.25 nozzle", + "only_one_wall_top": "1", + "print_settings_id": "0.14mm Standard @FF G4 0.25 nozzle", + "resolution": "0.005", + "seam_gap": "5%", + "small_perimeter_speed": "10", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "version": "2.2.0.0", + "wall_loops": "3" +} diff --git a/resources/profiles/Flashforge/process/0.14mm Standard @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/process/0.14mm Standard @FF G4P 0.25 nozzle.json new file mode 100644 index 0000000000..d74f8cf8c1 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.14mm Standard @FF G4P 0.25 nozzle.json @@ -0,0 +1,37 @@ +{ + "bridge_acceleration": "10%", + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.25 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "50", + "is_custom_defined": "0", + "layer_height": "0.14", + "name": "0.14mm Standard @FF G4P 0.25 nozzle", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "20", + "print_settings_id": "0.14mm Standard @FF G4P 0.25 nozzle", + "seam_gap": "5%", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "version": "2.2.0.0", + "wall_loops": "3", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.16mm Standard @FF G4 HF.json b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4 HF.json new file mode 100644 index 0000000000..c8fcfb6e93 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4 HF.json @@ -0,0 +1,44 @@ +{ + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "50%", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "layer_height": "0.16", + "name": "0.16mm Standard @FF G4 HF", + "only_one_wall_first_layer": "1", + "print_settings_id": "0.16mm Standard @FF G4 HF", + "resolution": "0.005", + "seam_gap": "5%", + "skirt_loops": "0", + "small_perimeter_speed": "10", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "330", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.14", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "150", + "support_top_z_distance": "0.14", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/process/0.16mm Standard @FF G4.json b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4.json new file mode 100644 index 0000000000..6736d39c4b --- /dev/null +++ b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4.json @@ -0,0 +1,42 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "initial_layer_speed": "60", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "300", + "name": "0.16mm Standard @FF G4", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_settings_id": "0.16mm Standard @FF G4", + "seam_gap": "5%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "sparse_infill_speed": "330", + "support_bottom_z_distance": "0.16", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "top_shell_layers": "6", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.16mm Standard @FF G4P HF.json b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4P HF.json new file mode 100644 index 0000000000..b45a1bd4dc --- /dev/null +++ b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4P HF.json @@ -0,0 +1,50 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "layer_height": "0.16", + "name": "0.16mm Standard @FF G4P HF", + "only_one_wall_first_layer": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_settings_id": "0.16mm Standard @FF G4P HF", + "seam_gap": "5%", + "skirt_loops": "0", + "small_perimeter_speed": "10", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "330", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.14", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "150", + "support_top_z_distance": "0.14", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.16mm Standard @FF G4P.json b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4P.json new file mode 100644 index 0000000000..a22ed3bccc --- /dev/null +++ b/resources/profiles/Flashforge/process/0.16mm Standard @FF G4P.json @@ -0,0 +1,47 @@ +{ + "bottom_solid_infill_flow_ratio": "0.98", + "bridge_flow": "0.98", + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "initial_layer_speed": "60", + "internal_bridge_flow": "0.98", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "300", + "name": "0.16mm Standard @FF G4P", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_settings_id": "0.16mm Standard @FF G4P", + "seam_gap": "5%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "sparse_infill_speed": "330", + "support_bottom_z_distance": "0.16", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "top_shell_layers": "6", + "top_solid_infill_flow_ratio": "0.98", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @FF G4 HF.json b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4 HF.json new file mode 100644 index 0000000000..282bd0062b --- /dev/null +++ b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4 HF.json @@ -0,0 +1,40 @@ +{ + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "50%", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "60", + "inner_wall_speed": "300", + "is_custom_defined": "0", + "name": "0.20mm Standard @FF G4 HF", + "only_one_wall_first_layer": "1", + "print_settings_id": "0.20mm Standard @FF G4 HF", + "resolution": "0.005", + "seam_gap": "5%", + "skirt_loops": "0", + "small_perimeter_speed": "10", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "150", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @FF G4 PLA600.json b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4 PLA600.json new file mode 100644 index 0000000000..687e83a530 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4 PLA600.json @@ -0,0 +1,43 @@ +{ + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "infill_wall_overlap": "50%", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "60", + "inner_wall_speed": "600", + "internal_solid_infill_speed": "600", + "is_custom_defined": "0", + "name": "0.20mm Standard @FF G4 PLA600", + "only_one_wall_first_layer": "1", + "print_settings_id": "0.20mm Standard @FF G4 PLA600", + "resolution": "0.005", + "seam_gap": "5%", + "skirt_loops": "0", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "600", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "200", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "top_surface_speed": "300", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @FF G4.json b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4.json new file mode 100644 index 0000000000..a570d372b3 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4.json @@ -0,0 +1,38 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "initial_layer_print_height": "0.25", + "initial_layer_speed": "60", + "is_custom_defined": "0", + "max_travel_detour_distance": "300", + "name": "0.20mm Standard @FF G4", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "40", + "print_settings_id": "0.20mm Standard @FF G4", + "seam_gap": "5%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF for PLA 600.json b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF for PLA 600.json new file mode 100644 index 0000000000..139dee9a9b --- /dev/null +++ b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF for PLA 600.json @@ -0,0 +1,48 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "infill_wall_overlap": "50%", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "60", + "inner_wall_speed": "600", + "internal_solid_infill_speed": "600", + "is_custom_defined": "0", + "name": "0.20mm Standard @FF G4P HF for PLA 600", + "only_one_wall_first_layer": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "print_settings_id": "0.20mm Standard @FF G4P HF for PLA 600", + "seam_gap": "5%", + "skirt_loops": "0", + "sparse_infill_speed": "600", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "200", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "top_surface_speed": "300", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF.json b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF.json new file mode 100644 index 0000000000..2da9c942ea --- /dev/null +++ b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF.json @@ -0,0 +1,45 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "60", + "inner_wall_speed": "300", + "is_custom_defined": "0", + "name": "0.20mm Standard @FF G4P HF", + "only_one_wall_first_layer": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "print_settings_id": "0.20mm Standard @FF G4P HF", + "seam_gap": "5%", + "skirt_loops": "0", + "small_perimeter_speed": "10", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "150", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P.json b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P.json new file mode 100644 index 0000000000..0cc5448e3e --- /dev/null +++ b/resources/profiles/Flashforge/process/0.20mm Standard @FF G4P.json @@ -0,0 +1,43 @@ +{ + "bottom_solid_infill_flow_ratio": "0.98", + "bridge_flow": "0.98", + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "15%", + "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "initial_layer_print_height": "0.25", + "initial_layer_speed": "60", + "internal_bridge_flow": "0.98", + "is_custom_defined": "0", + "max_travel_detour_distance": "300", + "name": "0.20mm Standard @FF G4P", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "40", + "print_settings_id": "0.20mm Standard @FF G4P", + "seam_gap": "5%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "top_solid_infill_flow_ratio": "0.98", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.24mm Standard @FF G4 HF.json b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4 HF.json new file mode 100644 index 0000000000..0b5d5094b8 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4 HF.json @@ -0,0 +1,44 @@ +{ + "bridge_speed": "15", + "elefant_foot_compensation": "0.1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "180", + "infill_wall_overlap": "50%", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "60", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "230", + "is_custom_defined": "0", + "layer_height": "0.24", + "name": "0.24mm Standard @FF G4 HF", + "only_one_wall_first_layer": "1", + "print_settings_id": "0.24mm Standard @FF G4 HF", + "resolution": "0.005", + "seam_gap": "5%", + "skirt_loops": "0", + "small_perimeter_speed": "10", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "230", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.18", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "150", + "support_top_z_distance": "0.18", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Flashforge/process/0.24mm Standard @FF G4.json b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4.json new file mode 100644 index 0000000000..28c02bc6d9 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4.json @@ -0,0 +1,42 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.4 nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "180", + "infill_wall_overlap": "15%", + "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "initial_layer_print_height": "0.25", + "initial_layer_speed": "60", + "internal_solid_infill_speed": "230", + "is_custom_defined": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "300", + "name": "0.24mm Standard @FF G4", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "40", + "print_settings_id": "0.24mm Standard @FF G4", + "seam_gap": "5%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "sparse_infill_speed": "230", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "top_shell_layers": "4", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.24mm Standard @FF G4P HF.json b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4P HF.json new file mode 100644 index 0000000000..84c31ee32a --- /dev/null +++ b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4P HF.json @@ -0,0 +1,50 @@ +{ + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_support": "0", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "180", + "infill_wall_overlap": "50%", + "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", + "initial_layer_infill_speed": "80", + "initial_layer_speed": "60", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "230", + "is_custom_defined": "0", + "layer_height": "0.24", + "name": "0.24mm Standard @FF G4P HF", + "only_one_wall_first_layer": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "print_settings_id": "0.24mm Standard @FF G4P HF", + "seam_gap": "5%", + "skirt_loops": "0", + "small_perimeter_speed": "10", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "230", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.18", + "support_interface_filament": "0", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_speed": "150", + "support_top_z_distance": "0.18", + "support_type": "tree(auto)", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.24mm Standard @FF G4P.json b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4P.json new file mode 100644 index 0000000000..38989d80c6 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.24mm Standard @FF G4P.json @@ -0,0 +1,47 @@ +{ + "bottom_solid_infill_flow_ratio": "0.98", + "bridge_flow": "0.98", + "bridge_speed": "15", + "brim_type": "auto_brim", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "filter_out_gap_fill": "0.1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.4 nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "180", + "infill_wall_overlap": "15%", + "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", + "initial_layer_print_height": "0.25", + "initial_layer_speed": "60", + "internal_bridge_flow": "0.98", + "internal_solid_infill_speed": "230", + "is_custom_defined": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "300", + "name": "0.24mm Standard @FF G4P", + "only_one_wall_top": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "40", + "print_settings_id": "0.24mm Standard @FF G4P", + "seam_gap": "5%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "10", + "sparse_infill_speed": "230", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_type": "tree(auto)", + "top_shell_layers": "4", + "top_solid_infill_flow_ratio": "0.98", + "travel_acceleration": "30000", + "travel_speed": "600", + "version": "2.1.1.0", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..c39d0f5256 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4 0.6 HF nozzle.json @@ -0,0 +1,77 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "default_acceleration": "20000", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "200", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.25", + "line_width": "0.62", + "name": "0.25mm Standard @FF G4 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "50", + "print_settings_id": "0.25mm Standard @FF G4 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "300", + "support_bottom_z_distance": "0.22", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "support_top_z_distance": "0.25", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..1b3d3d1475 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4 0.6 nozzle.json @@ -0,0 +1,70 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "default_acceleration": "20000", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "200", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.25", + "line_width": "0.62", + "name": "0.25mm Standard @FF G4 0.6 nozzle", + "only_one_wall_first_layer": "1", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "50", + "print_settings_id": "0.25mm Standard @FF G4 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "support_top_z_distance": "0.3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..53cde7913f --- /dev/null +++ b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,77 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "default_acceleration": "20000", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "200", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.25", + "line_width": "0.62", + "name": "0.25mm Standard @FF G4P 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "50", + "print_settings_id": "0.25mm Standard @FF G4P 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "300", + "support_bottom_z_distance": "0.22", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "support_top_z_distance": "0.25", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..543b4de6a5 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json @@ -0,0 +1,68 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "default_acceleration": "20000", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "infill_wall_overlap": "15%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "200", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.25", + "line_width": "0.62", + "name": "0.25mm Standard @FF G4P 0.6 nozzle", + "only_one_wall_first_layer": "1", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "overhang_speed_classic": "1", + "prime_tower_width": "45", + "prime_volume": "45", + "print_settings_id": "0.25mm Standard @FF G4P 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "support_top_z_distance": "0.3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_max_purge_speed": "120" +} diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..9eec025e87 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4 0.6 nozzle.json @@ -0,0 +1,66 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "line_width": "0.62", + "name": "0.30mm Standard @FF G4 0.6 nozzle", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "50", + "print_settings_id": "0.30mm Standard @FF G4 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..453cb1b33b --- /dev/null +++ b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json @@ -0,0 +1,63 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "infill_wall_overlap": "15%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "line_width": "0.62", + "name": "0.30mm Standard @FF G4P 0.6 nozzle", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "overhang_speed_classic": "1", + "prime_tower_width": "45", + "prime_volume": "45", + "print_settings_id": "0.30mm Standard @FF G4P 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_max_purge_speed": "120" +} diff --git a/resources/profiles/Flashforge/process/0.32mm Standard @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/process/0.32mm Standard @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..50d88a4761 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.32mm Standard @FF G4 0.8 HF nozzle.json @@ -0,0 +1,69 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "default_acceleration": "20000", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "200", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.32", + "line_width": "0.82", + "name": "0.32mm Standard @FF G4 0.8 HF nozzle", + "outer_wall_line_width": "0.82", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "70", + "print_settings_id": "0.32mm Standard @FF G4 0.8 HF nozzle", + "role_based_wipe_speed": "0", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.82", + "support_speed": "70", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.82", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.32mm Standard @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/process/0.32mm Standard @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..d483442848 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.32mm Standard @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,69 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "default_acceleration": "20000", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "200", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.32", + "line_width": "0.82", + "name": "0.32mm Standard @FF G4P 0.8 HF nozzle", + "outer_wall_line_width": "0.82", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "70", + "print_settings_id": "0.32mm Standard @FF G4P 0.8 HF nozzle", + "role_based_wipe_speed": "0", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.82", + "support_speed": "70", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.82", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..ed4a370f4b --- /dev/null +++ b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.36", + "line_width": "0.62", + "name": "0.36mm Standard @FF G4 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "70", + "print_settings_id": "0.36mm Standard @FF G4 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..9ebe7221fa --- /dev/null +++ b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4 0.6 nozzle.json @@ -0,0 +1,67 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.36", + "line_width": "0.62", + "name": "0.36mm Standard @FF G4 0.6 nozzle", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "70", + "print_settings_id": "0.36mm Standard @FF G4 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..c86823c895 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.36", + "line_width": "0.62", + "name": "0.36mm Standard @FF G4P 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "70", + "print_settings_id": "0.36mm Standard @FF G4P 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..2a265062bd --- /dev/null +++ b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json @@ -0,0 +1,64 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "infill_wall_overlap": "15%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.36", + "line_width": "0.62", + "name": "0.36mm Standard @FF G4P 0.6 nozzle", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "overhang_speed_classic": "1", + "prime_tower_width": "45", + "prime_volume": "45", + "print_settings_id": "0.36mm Standard @FF G4P 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_max_purge_speed": "120" +} diff --git a/resources/profiles/Flashforge/process/0.3mm Standard @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.3mm Standard @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..95d0a8cc7e --- /dev/null +++ b/resources/profiles/Flashforge/process/0.3mm Standard @FF G4 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "line_width": "0.62", + "name": "0.3mm Standard @FF G4 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "50", + "print_settings_id": "0.3mm Standard @FF G4 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "support_top_z_distance": "0.3", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.3mm Standard @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.3mm Standard @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..ecef050717 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.3mm Standard @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "line_width": "0.62", + "name": "0.3mm Standard @FF G4P 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "50", + "print_settings_id": "0.3mm Standard @FF G4P 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "support_top_z_distance": "0.3", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.40mm Standard @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/process/0.40mm Standard @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..17148d11a2 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.40mm Standard @FF G4 0.8 HF nozzle.json @@ -0,0 +1,67 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.82", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.4", + "line_width": "0.82", + "name": "0.40mm Standard @FF G4 0.8 HF nozzle", + "outer_wall_line_width": "0.82", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "80", + "print_settings_id": "0.40mm Standard @FF G4 0.8 HF nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.82", + "support_speed": "70", + "thick_internal_bridges": "0", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.82", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.40mm Standard @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/process/0.40mm Standard @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..e3f93c2019 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.40mm Standard @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,67 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.82", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.4", + "line_width": "0.82", + "name": "0.40mm Standard @FF G4P 0.8 HF nozzle", + "outer_wall_line_width": "0.82", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "80", + "print_settings_id": "0.40mm Standard @FF G4P 0.8 HF nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.82", + "support_speed": "70", + "thick_internal_bridges": "0", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.82", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 HF nozzle.json new file mode 100644 index 0000000000..eba5f38e02 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.42", + "line_width": "0.62", + "name": "0.42mm Standard @FF G4 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "80", + "print_settings_id": "0.42mm Standard @FF G4 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.3", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 nozzle.json new file mode 100644 index 0000000000..5a4fe7e055 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 nozzle.json @@ -0,0 +1,67 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.6 nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.42", + "line_width": "0.62", + "name": "0.42mm Standard @FF G4 0.6 nozzle", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "80", + "print_settings_id": "0.42mm Standard @FF G4 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.3", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 HF nozzle.json new file mode 100644 index 0000000000..6fecc87e00 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 HF nozzle.json @@ -0,0 +1,74 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "bridge_flow": "0.98", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 HF nozzle" + ], + "gap_fill_target": "topbottom", + "gap_infill_speed": "70", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.98", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "is_custom_defined": "0", + "layer_height": "0.42", + "line_width": "0.62", + "name": "0.42mm Standard @FF G4P 0.6 HF nozzle", + "outer_wall_acceleration": "5000", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "80", + "print_settings_id": "0.42mm Standard @FF G4P 0.6 HF nozzle", + "reduce_infill_retraction": "0", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "small_perimeter_threshold": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.3", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_speed": "105", + "thick_internal_bridges": "0", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "travel_acceleration": "30000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "500", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json new file mode 100644 index 0000000000..86e29d4206 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json @@ -0,0 +1,64 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.6 nozzle" + ], + "infill_wall_overlap": "15%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.62", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.42", + "line_width": "0.62", + "name": "0.42mm Standard @FF G4P 0.6 nozzle", + "outer_wall_line_width": "0.62", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "overhang_speed_classic": "1", + "prime_tower_width": "45", + "prime_volume": "45", + "print_settings_id": "0.42mm Standard @FF G4P 0.6 nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "10%", + "skirt_loops": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.3", + "support_interface_filament": "0", + "support_line_width": "0.62", + "support_speed": "70", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.62", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_max_purge_speed": "120" +} diff --git a/resources/profiles/Flashforge/process/0.48mm Standard @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/process/0.48mm Standard @FF G4 0.8 HF nozzle.json new file mode 100644 index 0000000000..049a8c748e --- /dev/null +++ b/resources/profiles/Flashforge/process/0.48mm Standard @FF G4 0.8 HF nozzle.json @@ -0,0 +1,67 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 0.8 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.82", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.48", + "line_width": "0.82", + "name": "0.48mm Standard @FF G4 0.8 HF nozzle", + "outer_wall_line_width": "0.82", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "90", + "print_settings_id": "0.48mm Standard @FF G4 0.8 HF nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "8%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.82", + "support_speed": "70", + "thick_internal_bridges": "0", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.82", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Flashforge/process/0.48mm Standard @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/process/0.48mm Standard @FF G4P 0.8 HF nozzle.json new file mode 100644 index 0000000000..a03eb67e54 --- /dev/null +++ b/resources/profiles/Flashforge/process/0.48mm Standard @FF G4P 0.8 HF nozzle.json @@ -0,0 +1,67 @@ +{ + "bottom_solid_infill_flow_ratio": "0.96", + "bridge_acceleration": "3000", + "brim_type": "auto_brim", + "enable_arc_fitting": "1", + "enable_prime_tower": "1", + "exclude_object": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0.1", + "flush_into_support": "1", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Flashforge Guider4 Pro 0.8 HF nozzle" + ], + "gap_fill_target": "topbottom", + "infill_wall_overlap": "20%", + "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", + "initial_layer_acceleration": "800", + "initial_layer_infill_speed": "60", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "600", + "inner_wall_acceleration": "10000", + "inner_wall_line_width": "0.82", + "internal_bridge_flow": "0.96", + "internal_bridge_speed": "35", + "internal_solid_infill_acceleration": "8000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "120", + "is_custom_defined": "0", + "layer_height": "0.48", + "line_width": "0.82", + "name": "0.48mm Standard @FF G4P 0.8 HF nozzle", + "outer_wall_line_width": "0.82", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "12", + "prime_tower_brim_width": "6", + "prime_volume": "90", + "print_settings_id": "0.48mm Standard @FF G4P 0.8 HF nozzle", + "role_based_wipe_speed": "0", + "seam_gap": "8%", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "0", + "small_perimeter_speed": "35", + "sparse_infill_acceleration": "100%", + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": "220", + "support_bottom_z_distance": "0.25", + "support_interface_filament": "0", + "support_line_width": "0.82", + "support_speed": "70", + "thick_internal_bridges": "0", + "top_solid_infill_flow_ratio": "0.96", + "top_surface_acceleration": "3000", + "top_surface_line_width": "0.82", + "top_surface_speed": "100", + "travel_acceleration": "20000", + "travel_speed": "550", + "version": "2.1.1.0", + "wipe_speed": "50", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "10", + "wipe_tower_extra_spacing": "110%" +}