diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index 28f4a90e21..23ce3e784a 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -119,6 +119,10 @@ { "name": "Creality K2 Plus", "sub_path": "machine/Creality K2 Plus.json" + }, + { + "name": "Creality Hi", + "sub_path": "machine/Creality Hi.json" } ], "process_list": [ @@ -266,6 +270,10 @@ "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle", "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json" }, + { + "name": "0.08mm SuperDetail @Creality Hi", + "sub_path": "process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json" + }, { "name": "0.10mm HighDetail @Creality CR-6 0.4.json", "sub_path": "process/0.10mm HighDetail @Creality CR-6 0.4.json" @@ -422,6 +430,10 @@ "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle", "sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json" }, + { + "name": "0.12mm Fine @Creality Hi", + "sub_path": "process/0.12mm Fine @Creality Hi 0.4 nozzle.json" + }, { "name": "0.16mm Optimal @Creality CR10V2", "sub_path": "process/0.16mm Optimal @Creality CR10V2.json" @@ -586,6 +598,10 @@ "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", "sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json" }, + { + "name": "0.16mm Optimal @Creality Hi", + "sub_path": "process/0.16mm Optimal @Creality Hi 0.4 nozzle.json" + }, { "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", "sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json" @@ -782,6 +798,10 @@ "name": "0.20mm Fast @Creality K1 SE 0.4", "sub_path": "process/0.20mm Fast @Creality K1 SE 0.4.json" }, + { + "name": "0.20mm Standard @Creality Hi", + "sub_path": "process/0.20mm Standard @Creality Hi 0.4 nozzle.json" + }, { "name": "0.24mm Draft @Creality Ender3 0.2", "sub_path": "process/0.24mm Draft @Creality Ender3 0.2.json" @@ -914,6 +934,14 @@ "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle", "sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json" }, + { + "name": "0.24mm Draft @Creality Hi", + "sub_path": "process/0.24mm Draft @Creality Hi 0.4 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality Hi", + "sub_path": "process/0.24mm Optimal @Creality Hi 0.6 nozzle.json" + }, { "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle", "sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json" @@ -1082,6 +1110,10 @@ "name": "0.30mm Standard @Creality K1C", "sub_path": "process/0.30mm Standard @Creality K1C 0.6 nozzle.json" }, + { + "name": "0.30mm Standard @Creality Hi", + "sub_path": "process/0.30mm Standard @Creality Hi 0.6 nozzle.json" + }, { "name": "0.30mm Standard @Creality K1Max (0.6 nozzle)", "sub_path": "process/0.30mm Standard @Creality K1Max (0.6 nozzle).json" @@ -1106,6 +1138,10 @@ "name": "0.36mm Draft @Creality K1C", "sub_path": "process/0.36mm Draft @Creality K1C 0.6 nozzle.json" }, + { + "name": "0.36mm Draft @Creality Hi", + "sub_path": "process/0.36mm Draft @Creality Hi 0.6 nozzle.json" + }, { "name": "0.36mm Draft @Creality K1Max (0.6 nozzle)", "sub_path": "process/0.36mm Draft @Creality K1Max (0.6 nozzle).json" @@ -1327,6 +1363,50 @@ { "name": "Creality Generic PA-CF @K2-all", "sub_path": "filament/Creality Generic PA-CF @K2-all.json" + }, + { + "name": "Creality Generic ABS @Hi-all", + "sub_path": "filament/Creality Generic ABS @Hi-all.json" + }, + { + "name": "Creality Generic ASA @Hi-all", + "sub_path": "filament/Creality Generic ASA @Hi-all.json" + }, + { + "name": "Creality Generic ASA-CF @Hi-all", + "sub_path": "filament/Creality Generic ASA-CF @Hi-all.json" + }, + { + "name": "Creality Generic PETG @Hi-all", + "sub_path": "filament/Creality Generic PETG @Hi-all.json" + }, + { + "name": "Creality Generic PETG-CF @Hi-all", + "sub_path": "filament/Creality Generic PETG-CF @Hi-all.json" + }, + { + "name": "Creality Generic PLA @Hi-all", + "sub_path": "filament/Creality Generic PLA @Hi-all.json" + }, + { + "name": "Creality Generic PLA High Speed @Hi-all", + "sub_path": "filament/Creality Generic PLA High Speed @Hi-all.json" + }, + { + "name": "Creality Generic PLA Matte @Hi-all", + "sub_path": "filament/Creality Generic PLA Matte @Hi-all.json" + }, + { + "name": "Creality Generic PLA Silk @Hi-all", + "sub_path": "filament/Creality Generic PLA Silk @Hi-all.json" + }, + { + "name": "Creality Generic PLA-CF @Hi-all", + "sub_path": "filament/Creality Generic PLA-CF @Hi-all.json" + }, + { + "name": "Creality Generic TPU @Hi-all", + "sub_path": "filament/Creality Generic TPU @Hi-all.json" } ], "machine_list": [ @@ -1609,6 +1689,14 @@ { "name": "Creality K2 Plus 0.8 nozzle", "sub_path": "machine/Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "Creality Hi 0.4 nozzle", + "sub_path": "machine/Creality Hi 0.4 nozzle.json" + }, + { + "name": "Creality Hi 0.6 nozzle", + "sub_path": "machine/Creality Hi 0.6 nozzle.json" } ] } \ No newline at end of file diff --git a/resources/profiles/Creality/Creality Hi_cover.png b/resources/profiles/Creality/Creality Hi_cover.png new file mode 100644 index 0000000000..442bc3714e Binary files /dev/null and b/resources/profiles/Creality/Creality Hi_cover.png differ diff --git a/resources/profiles/Creality/creality_hi_buildplate_model.stl b/resources/profiles/Creality/creality_hi_buildplate_model.stl new file mode 100644 index 0000000000..262c3279e5 Binary files /dev/null and b/resources/profiles/Creality/creality_hi_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_hi_buildplate_texture.png b/resources/profiles/Creality/creality_hi_buildplate_texture.png new file mode 100644 index 0000000000..d08316d5ec Binary files /dev/null and b/resources/profiles/Creality/creality_hi_buildplate_texture.png differ diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json new file mode 100644 index 0000000000..13fbd8c737 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @Hi", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ABS", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @Hi-all.json new file mode 100644 index 0000000000..7e229dc729 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic ASA @Hi-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic ASA-CF @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic ASA-CF @Hi-all.json new file mode 100644 index 0000000000..e757f82176 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic ASA-CF @Hi-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA-CF @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA @Hi-all", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @Hi-all.json new file mode 100644 index 0000000000..11a699ef25 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PETG @Hi-all.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "cool_plate_temp" : ["70"], + "eng_plate_temp" : ["70"], + "hot_plate_temp" : ["70"], + "textured_plate_temp" : ["70"], + "cool_plate_temp_initial_layer" : ["70"], + "eng_plate_temp_initial_layer" : ["70"], + "hot_plate_temp_initial_layer" : ["70"], + "textured_plate_temp_initial_layer" : ["70"], + "nozzle_temperature_initial_layer": ["250"], + "nozzle_temperature": ["250"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PETG-CF @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PETG-CF @Hi-all.json new file mode 100644 index 0000000000..e09239c326 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PETG-CF @Hi-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG-CF @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG @Hi-all", + "filament_max_volumetric_speed": ["9"], + "filament_flow_ratio": ["0.95"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @Hi-all.json new file mode 100644 index 0000000000..dd1da0b595 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA @Hi-all.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "setting_id": "GFSL99_00", + "name": "Creality Generic PLA @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "cool_plate_temp": [ + "55" + ], + "eng_plate_temp": [ + "55" + ], + "hot_plate_temp": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_load_time": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Hi-all.json new file mode 100644 index 0000000000..b661eddf23 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Hi-all.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "setting_id": "GFSL95_00", + "name": "Creality Generic PLA High Speed @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Matte @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Matte @Hi-all.json new file mode 100644 index 0000000000..540725ceb2 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA Matte @Hi-all.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "setting_id": "GFSL05_00", + "name": "Creality Generic PLA Matte @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Silk @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Silk @Hi-all.json new file mode 100644 index 0000000000..dfb79cb6b9 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA Silk @Hi-all.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Silk @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA-CF @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic PLA-CF @Hi-all.json new file mode 100644 index 0000000000..96712a38f7 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA-CF @Hi-all.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA-CF @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA-CF", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @Hi-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @Hi-all.json new file mode 100644 index 0000000000..f34d8600c3 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic TPU @Hi-all.json @@ -0,0 +1,36 @@ +{ + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ], + "filament_max_volumetric_speed": [ + "3.5" + ], + "slow_down_layer_time": [ + "5" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000000..1c0a4b4421 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json @@ -0,0 +1,145 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Hi 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Hi", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Hi", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "260x0", + "260x260", + "0x260" + ], + "printable_height": "300", + "auxiliary_fan": "0", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "12000", + "12000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "12000", + "12000" + ], + "machine_max_acceleration_x": [ + "12000", + "12000" + ], + "machine_max_acceleration_y": [ + "12000", + "12000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "purge_in_prime_tower": "0", + "retraction_minimum_travel": [ + "0.5" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_below": [ + "299" + ], + "retract_when_changing_layer": [ + "1" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_lid": "27", + "extruder_clearance_height_to_rod": "27", + "extruder_clearance_radius": "55", + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600", + "default_filament_profile": [ + "Creality Generic PLA @Hi-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "96x96/PNG, 300x300/PNG" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000000..c42ddd6ed4 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json @@ -0,0 +1,145 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Hi 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Hi", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.30mm Standard @Creality Hi", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "260x0", + "260x260", + "0x260" + ], + "printable_height": "300", + "auxiliary_fan": "0", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "12000", + "12000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "12000", + "12000" + ], + "machine_max_acceleration_x": [ + "12000", + "12000" + ], + "machine_max_acceleration_y": [ + "12000", + "12000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.35" + ], + "min_layer_height": [ + "0.1" + ], + "printer_settings_id": "Creality", + "purge_in_prime_tower": "0", + "retraction_minimum_travel": [ + "0.5" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_below": [ + "299" + ], + "retract_when_changing_layer": [ + "1" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_lid": "27", + "extruder_clearance_height_to_rod": "27", + "extruder_clearance_radius": "55", + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600", + "default_filament_profile": [ + "Creality Generic PLA @Hi-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "96x96/PNG, 300x300/PNG" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Hi.json b/resources/profiles/Creality/machine/Creality Hi.json new file mode 100644 index 0000000000..20bfd0d55c --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Hi.json @@ -0,0 +1,13 @@ +{ + "type": "machine_model", + "name": "Creality Hi", + "model_id": "Creality-Hi", + "nozzle_diameter": "0.4;0.6", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_hi_buildplate_model.stl", + "bed_texture": "creality_hi_buildplate_texture.png", + "default_bed_type": "Textured PEI Plate", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Hi-all;Creality Generic ASA @Hi-all;Creality Generic ASA-CF @Hi-all;Creality Generic PETG @Hi-all;Creality Generic PETG-CF @Hi-all;Creality Generic PLA @Hi-all;Creality Generic PLA High Speed @Hi-all;Creality Generic PLA Matte @Hi-all;Creality Generic PLA Silk @Hi-all;Creality Generic PLA-CF @Hi-all;Creality Generic TPU @Hi-all" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000000..e21dceac19 --- /dev/null +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "7", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "8%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.08", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000000..d091be7ea1 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.22", + "support_bottom_z_distance": "0.24", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000000..8b30e2b88b --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000000..023cf2eeae --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "230", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000000..0ae0cd860d --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "230", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000000..31adad81ab --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.6 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000000..b960981a53 --- /dev/null +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.6 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000000..ca3749291c --- /dev/null +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.6 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file