GitHub-Proxy/OrcaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/SoftFever/OrcaSlicer.git synced 2025-08-14 04:56:02 +08:00
Code Issues Packages Projects Releases Wiki Activity

Updated some configurations for the Geeetech M1 machine (#7481)

Browse Source 
Updated some configurations for the M1 machine

Fixed an issue where incorrect parameters on the M1 machine caused slicing to fail.
This commit is contained in:
whoseyoung 2025-01-07 22:46:02 +08:00 committed by GitHub
parent d4580e7a32
commit 9b68c695d7
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
28 changed files with 464 additions and 365 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json
View File

@ -15,19 +15,19 @@
"0.2"
],
"extruder_type": [
"Direct"
"Direct Drive"
],
"machine_max_acceleration_e": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
@ -102,8 +102,8 @@
"retract_lift_below":[
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

18
resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json
View File

@ -15,19 +15,19 @@
"0.4"
],
"extruder_type": [
"Direct"
"Direct Drive"
],
"machine_max_acceleration_e": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
@ -108,8 +108,8 @@
"retract_lift_below":[
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

18
resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json
View File

@ -15,19 +15,19 @@
"0.6"
],
"extruder_type": [
"Direct"
"Direct Drive"
],
"machine_max_acceleration_e": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
@ -108,8 +108,8 @@
"retract_lift_below":[
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

18
resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json
View File

@ -15,19 +15,19 @@
"0.8"
],
"extruder_type": [
"Direct"
"Direct Drive"
],
"machine_max_acceleration_e": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
@ -108,8 +108,8 @@
"retract_lift_below":[
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

4
resources/profiles/Geeetech/machine/fdm_geeetech_common.json
View File

@ -80,7 +80,8 @@
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "47",
"extruder_clearance_max_radius": "47",
"extruder_clearance_dist_to_rod": "24",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
@ -137,5 +138,4 @@
"support_multi_bed_types": "1",
"auxiliary_fan": "0",
"z_hop_types": "Normal Lift"
}

3
resources/profiles/Geeetech/machine/fdm_machine_common.json
View File

@ -70,7 +70,8 @@
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_max_radius": "65",
"extruder_clearance_dist_to_rod": "33",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [

7
resources/profiles/Geeetech/process/0.08mm Extra Fine @Geeetech M1.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.4 nozzle"
]

7
resources/profiles/Geeetech/process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.2 nozzle"
]

7
resources/profiles/Geeetech/process/0.10mm Fine @Geeetech M1.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.4 nozzle"
]

7
resources/profiles/Geeetech/process/0.10mm Standard @Geeetech M1 0.2 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.2 nozzle"
]

7
resources/profiles/Geeetech/process/0.12mm Draft @Geeetech M1 0.2 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.2 nozzle"
]

7
resources/profiles/Geeetech/process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.2 nozzle"
]

7
resources/profiles/Geeetech/process/0.16mm Optimal @Geeetech M1.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.4 nozzle"
]

7
resources/profiles/Geeetech/process/0.20mm Standard @Geeetech M1.json
View File

@ -28,6 +28,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.4 nozzle"
]

7
resources/profiles/Geeetech/process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.6 nozzle"
]

7
resources/profiles/Geeetech/process/0.25mm Draft @Geeetech M1.json
View File

@ -28,6 +28,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.4 nozzle"
]

7
resources/profiles/Geeetech/process/0.30mm Standard @Geeetech M1 0.6 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.6 nozzle"
]

7
resources/profiles/Geeetech/process/0.36mm Draft @Geeetech M1 0.6 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.6 nozzle"
]

7
resources/profiles/Geeetech/process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.8 nozzle"
]

7
resources/profiles/Geeetech/process/0.44mm Draft @Geeetech M1 0.8 nozzle.json
View File

@ -20,6 +20,13 @@
"initial_layer_acceleration": "500",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"default_jerk": "10",
"initial_layer_jerk": "10",
"outer_wall_jerk": "10",
"infill_jerk": "10",
"travel_jerk": "10",
"inner_wall_jerk": "10",
"top_surface_jerk": "10",
"compatible_printers": [
"Geeetech M1 0.8 nozzle"
]