diff --git a/resources/profiles/Sovol.json b/resources/profiles/Sovol.json index 50c239399f..3476b80ef1 100644 --- a/resources/profiles/Sovol.json +++ b/resources/profiles/Sovol.json @@ -9,7 +9,7 @@ "name": "Sovol SV01 Pro", "sub_path": "machine/Sovol SV01 Pro.json" }, - { + { "name": "Sovol SV02", "sub_path": "machine/Sovol SV02.json" }, @@ -17,11 +17,11 @@ "name": "Sovol SV05", "sub_path": "machine/Sovol SV05.json" }, - { + { "name": "Sovol SV06", "sub_path": "machine/Sovol SV06.json" }, - { + { "name": "Sovol SV06 Plus", "sub_path": "machine/Sovol SV06 Plus.json" }, @@ -33,15 +33,15 @@ "name": "Sovol SV06 Plus ACE", "sub_path": "machine/Sovol SV06 Plus ACE.json" }, - { + { "name": "Sovol SV07", "sub_path": "machine/Sovol SV07.json" }, - { + { "name": "Sovol SV07 Plus", "sub_path": "machine/Sovol SV07 Plus.json" }, - { + { "name": "Sovol SV08", "sub_path": "machine/Sovol SV08.json" } @@ -55,7 +55,7 @@ "name": "0.18mm Optimal @Sovol SV01Pro", "sub_path": "process/0.18mm Optimal @Sovol SV01Pro.json" }, - { + { "name": "0.18mm Optimal @Sovol SV02", "sub_path": "process/0.18mm Optimal @Sovol SV02.json" }, @@ -63,19 +63,19 @@ "name": "0.18mm Optimal @Sovol SV05", "sub_path": "process/0.18mm Optimal @Sovol SV05.json" }, - { + { "name": "0.18mm Optimal @Sovol SV06", "sub_path": "process/0.18mm Optimal @Sovol SV06.json" }, - { + { "name": "0.18mm Optimal @Sovol SV06Plus", "sub_path": "process/0.18mm Optimal @Sovol SV06Plus.json" }, - { + { "name": "0.18mm Optimal @Sovol SV07", "sub_path": "process/0.18mm Optimal @Sovol SV07.json" }, - { + { "name": "0.18mm Optimal @Sovol SV07 Plus", "sub_path": "process/0.18mm Optimal @Sovol SV07Plus.json" }, @@ -83,7 +83,7 @@ "name": "0.20mm Standard @Sovol SV01Pro", "sub_path": "process/0.20mm Standard @Sovol SV01Pro.json" }, - { + { "name": "0.20mm Standard @Sovol SV02", "sub_path": "process/0.20mm Standard @Sovol SV02.json" }, @@ -91,11 +91,11 @@ "name": "0.20mm Standard @Sovol SV05", "sub_path": "process/0.20mm Standard @Sovol SV05.json" }, - { + { "name": "0.20mm Standard @Sovol SV06", "sub_path": "process/0.20mm Standard @Sovol SV06.json" }, - { + { "name": "0.20mm Standard @Sovol SV06Plus", "sub_path": "process/0.20mm Standard @Sovol SV06Plus.json" }, @@ -131,27 +131,27 @@ "name": "0.20mm Standard @Sovol SV06 Plus ACE", "sub_path": "process/0.20mm Standard @Sovol SV06 Plus ACE.json" }, - { + { "name": "0.20mm Standard @Sovol SV07", "sub_path": "process/0.20mm Standard @Sovol SV07.json" }, - { + { "name": "0.20mm Standard @Sovol SV07 Plus", "sub_path": "process/0.20mm Standard @Sovol SV07Plus.json" }, - { + { "name": "0.10mm Standard @Sovol SV08 0.2 nozzle", "sub_path": "process/0.10mm Standard @Sovol SV08 0.2 nozzle.json" }, - { + { "name": "0.20mm Standard @Sovol SV08 0.4 nozzle", "sub_path": "process/0.20mm Standard @Sovol SV08 0.4 nozzle.json" }, - { + { "name": "0.30mm Standard @Sovol SV08 0.6 nozzle", "sub_path": "process/0.30mm Standard @Sovol SV08 0.6 nozzle.json" }, - { + { "name": "0.40mm Standard @Sovol SV08 0.8 nozzle", "sub_path": "process/0.40mm Standard @Sovol SV08 0.8 nozzle.json" }, @@ -161,46 +161,6 @@ } ], "filament_list": [ - { - "name": "fdm_filament_common", - "sub_path": "filament/fdm_filament_common.json" - }, - { - "name": "fdm_filament_abs", - "sub_path": "filament/fdm_filament_abs.json" - }, - { - "name": "fdm_filament_pet", - "sub_path": "filament/fdm_filament_pet.json" - }, - { - "name": "fdm_filament_pla", - "sub_path": "filament/fdm_filament_pla.json" - }, - { - "name": "fdm_filament_tpu", - "sub_path": "filament/fdm_filament_tpu.json" - }, - { - "name": "Sovol Generic ABS", - "sub_path": "filament/Sovol Generic ABS.json" - }, - { - "name": "Sovol Generic PETG", - "sub_path": "filament/Sovol Generic PETG.json" - }, - { - "name": "Sovol Generic PLA", - "sub_path": "filament/Sovol Generic PLA.json" - }, - { - "name": "Sovol Generic TPU", - "sub_path": "filament/Sovol Generic TPU.json" - }, - { - "name": "Sovol SV06 ACE PLA", - "sub_path": "filament/Sovol SV06 ACE PLA.json" - }, { "name": "Sovol SV06 ACE ABS", "sub_path": "filament/Sovol SV06 ACE ABS.json" @@ -210,12 +170,12 @@ "sub_path": "filament/Sovol SV06 ACE PETG.json" }, { - "name": "Sovol SV06 ACE TPU", - "sub_path": "filament/Sovol SV06 ACE TPU.json" + "name": "Sovol SV06 ACE PLA", + "sub_path": "filament/Sovol SV06 ACE PLA.json" }, { - "name": "Sovol SV06 Plus ACE PLA", - "sub_path": "filament/Sovol SV06 Plus ACE PLA.json" + "name": "Sovol SV06 ACE TPU", + "sub_path": "filament/Sovol SV06 ACE TPU.json" }, { "name": "Sovol SV06 Plus ACE ABS", @@ -225,6 +185,10 @@ "name": "Sovol SV06 Plus ACE PETG", "sub_path": "filament/Sovol SV06 Plus ACE PETG.json" }, + { + "name": "Sovol SV06 Plus ACE PLA", + "sub_path": "filament/Sovol SV06 Plus ACE PLA.json" + }, { "name": "Sovol SV06 Plus ACE TPU", "sub_path": "filament/Sovol SV06 Plus ACE TPU.json" @@ -233,14 +197,6 @@ "name": "Sovol SV07 PLA", "sub_path": "filament/Sovol SV07 PLA.json" }, - { - "name": "Sovol SV08 PLA", - "sub_path": "filament/Sovol SV08 PLA.json" - }, - { - "name": "Sovol SV08 PLA @SV08 0.2 nozzle", - "sub_path": "filament/Sovol SV08 PLA @SV08 0.2 nozzle.json" - }, { "name": "Sovol SV08 ABS", "sub_path": "filament/Sovol SV08 ABS.json" @@ -249,6 +205,14 @@ "name": "Sovol SV08 PETG", "sub_path": "filament/Sovol SV08 PETG.json" }, + { + "name": "Sovol SV08 PLA", + "sub_path": "filament/Sovol SV08 PLA.json" + }, + { + "name": "Sovol SV08 PLA @SV08 0.2 nozzle", + "sub_path": "filament/Sovol SV08 PLA @SV08 0.2 nozzle.json" + }, { "name": "Sovol SV08 TPU", "sub_path": "filament/Sovol SV08 TPU.json" @@ -263,7 +227,7 @@ "name": "Sovol SV01 Pro 0.4 nozzle", "sub_path": "machine/Sovol SV01 Pro 0.4 nozzle.json" }, - { + { "name": "Sovol SV02 0.4 nozzle", "sub_path": "machine/Sovol SV02 0.4 nozzle.json" }, @@ -271,15 +235,15 @@ "name": "Sovol SV05 0.4 nozzle", "sub_path": "machine/Sovol SV05 0.4 nozzle.json" }, - { + { "name": "Sovol SV06 0.4 High-Speed nozzle", "sub_path": "machine/Sovol SV06 0.4 High-Speed nozzle.json" }, - { + { "name": "Sovol SV06 0.4 nozzle", "sub_path": "machine/Sovol SV06 0.4 nozzle.json" }, - { + { "name": "Sovol SV06 Plus 0.4 nozzle", "sub_path": "machine/Sovol SV06 Plus 0.4 nozzle.json" }, @@ -303,29 +267,29 @@ "name": "Sovol SV06 Plus ACE 0.4 nozzle", "sub_path": "machine/Sovol SV06 Plus ACE 0.4 nozzle.json" }, - { + { "name": "Sovol SV07 0.4 nozzle", "sub_path": "machine/Sovol SV07 0.4 nozzle.json" }, - { + { "name": "Sovol SV07 Plus 0.4 nozzle", "sub_path": "machine/Sovol SV07 Plus 0.4 nozzle.json" }, - { + { "name": "Sovol SV08 0.2 nozzle", "sub_path": "machine/Sovol SV08 0.2 nozzle.json" }, - { + { "name": "Sovol SV08 0.4 nozzle", "sub_path": "machine/Sovol SV08 0.4 nozzle.json" }, - { + { "name": "Sovol SV08 0.6 nozzle", "sub_path": "machine/Sovol SV08 0.6 nozzle.json" }, - { + { "name": "Sovol SV08 0.8 nozzle", "sub_path": "machine/Sovol SV08 0.8 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Sovol/filament/Sovol Generic ABS.json b/resources/profiles/Sovol/filament/Sovol Generic ABS.json deleted file mode 100644 index ebf389e1d6..0000000000 --- a/resources/profiles/Sovol/filament/Sovol Generic ABS.json +++ /dev/null @@ -1,25 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFB99", - "setting_id": "GFSA04", - "name": "Sovol Generic ABS", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_abs", - "filament_flow_ratio": [ - "0.926" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "compatible_printers": [ - "Sovol SV01 Pro 0.4 nozzle", - "Sovol SV02 0.4 nozzle", - "Sovol SV05 0.4 nozzle", - "Sovol SV06 0.4 nozzle", - "Sovol SV06 0.4 High-Speed nozzle", - "Sovol SV06 Plus 0.4 nozzle", - "Sovol SV07 0.4 nozzle", - "Sovol SV07 Plus 0.4 nozzle" - ] -} diff --git a/resources/profiles/Sovol/filament/Sovol Generic PETG.json b/resources/profiles/Sovol/filament/Sovol Generic PETG.json deleted file mode 100644 index 1436fdc233..0000000000 --- a/resources/profiles/Sovol/filament/Sovol Generic PETG.json +++ /dev/null @@ -1,52 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFG99", - "setting_id": "GFSG99", - "name": "Sovol Generic PETG", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pet", - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "fan_cooling_layer_time": [ - "30" - ], - "overhang_fan_speed": [ - "90" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "compatible_printers": [ - "Sovol SV01 Pro 0.4 nozzle", - "Sovol SV02 0.4 nozzle", - "Sovol SV05 0.4 nozzle", - "Sovol SV06 0.4 nozzle", - "Sovol SV06 0.4 High-Speed nozzle", - "Sovol SV06 Plus 0.4 nozzle", - "Sovol SV07 0.4 nozzle", - "Sovol SV07 Plus 0.4 nozzle" - ] -} diff --git a/resources/profiles/Sovol/filament/Sovol Generic PLA.json b/resources/profiles/Sovol/filament/Sovol Generic PLA.json deleted file mode 100644 index 822e0558a5..0000000000 --- a/resources/profiles/Sovol/filament/Sovol Generic PLA.json +++ /dev/null @@ -1,28 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFL99", - "setting_id": "GFSL99", - "name": "Sovol Generic PLA", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pla", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Sovol SV01 Pro 0.4 nozzle", - "Sovol SV02 0.4 nozzle", - "Sovol SV05 0.4 nozzle", - "Sovol SV06 0.4 nozzle", - "Sovol SV06 0.4 High-Speed nozzle", - "Sovol SV06 Plus 0.4 nozzle", - "Sovol SV07 0.4 nozzle", - "Sovol SV07 Plus 0.4 nozzle" - ] -} diff --git a/resources/profiles/Sovol/filament/Sovol Generic TPU.json b/resources/profiles/Sovol/filament/Sovol Generic TPU.json deleted file mode 100644 index cc11b47d1d..0000000000 --- a/resources/profiles/Sovol/filament/Sovol Generic TPU.json +++ /dev/null @@ -1,28 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFL99", - "setting_id": "GFSL99", - "name": "Sovol Generic TPU", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_tpu", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Sovol SV01 Pro 0.4 nozzle", - "Sovol SV02 0.4 nozzle", - "Sovol SV05 0.4 nozzle", - "Sovol SV06 0.4 nozzle", - "Sovol SV06 0.4 High-Speed nozzle", - "Sovol SV06 Plus 0.4 nozzle", - "Sovol SV07 0.4 nozzle", - "Sovol SV07 Plus 0.4 nozzle" - ] -} diff --git a/resources/profiles/Sovol/filament/Sovol SV06 ACE ABS.json b/resources/profiles/Sovol/filament/Sovol SV06 ACE ABS.json index e7e6b637b9..114cfe18c9 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 ACE ABS.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 ACE ABS.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 ACE ABS", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic ABS", + "inherits": "Generic ABS @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["15"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 ACE PETG.json b/resources/profiles/Sovol/filament/Sovol SV06 ACE PETG.json index ddf4172297..8dc1532b10 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 ACE PETG.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 ACE PETG.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 ACE PETG", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PETG", + "inherits": "Generic PETG @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["15"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 ACE PLA.json b/resources/profiles/Sovol/filament/Sovol SV06 ACE PLA.json index d9c1cdf709..a4ff71e307 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 ACE PLA.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 ACE PLA.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 ACE PLA", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PLA", + "inherits": "Generic PLA @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["21"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 ACE TPU.json b/resources/profiles/Sovol/filament/Sovol SV06 ACE TPU.json index 0582b407e8..ee33fc6d4e 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 ACE TPU.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 ACE TPU.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 ACE TPU", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic TPU", + "inherits": "Generic TPU @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["3.6"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE ABS.json b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE ABS.json index 33e25425f5..8ad233e820 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE ABS.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE ABS.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 Plus ACE ABS", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic ABS", + "inherits": "Generic ABS @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["15"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PETG.json b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PETG.json index e69c6117e4..ae4b0bf5f4 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PETG.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PETG.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 Plus ACE PETG", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PETG", + "inherits": "Generic PETG @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["15"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PLA.json b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PLA.json index 642d2d12b7..44ec5a7121 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PLA.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE PLA.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 Plus ACE PLA", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PLA", + "inherits": "Generic PLA @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["21"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE TPU.json b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE TPU.json index 77163f8a94..58e1118989 100644 --- a/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE TPU.json +++ b/resources/profiles/Sovol/filament/Sovol SV06 Plus ACE TPU.json @@ -5,7 +5,7 @@ "name": "Sovol SV06 Plus ACE TPU", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic TPU", + "inherits": "Generic TPU @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["3.6"], "full_fan_speed_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV07 PLA.json b/resources/profiles/Sovol/filament/Sovol SV07 PLA.json index 9a977e92ad..ee1ef64456 100644 --- a/resources/profiles/Sovol/filament/Sovol SV07 PLA.json +++ b/resources/profiles/Sovol/filament/Sovol SV07 PLA.json @@ -5,7 +5,7 @@ "name": "Sovol SV07 PLA", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PLA", + "inherits": "Generic PLA @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["24"], "filament_retraction_length": ["0.5"], diff --git a/resources/profiles/Sovol/filament/Sovol SV08 ABS.json b/resources/profiles/Sovol/filament/Sovol SV08 ABS.json index dc51fb5b67..4d18f24a36 100644 --- a/resources/profiles/Sovol/filament/Sovol SV08 ABS.json +++ b/resources/profiles/Sovol/filament/Sovol SV08 ABS.json @@ -5,7 +5,7 @@ "name": "Sovol SV08 ABS", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic ABS", + "inherits": "Generic ABS @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["21"], "nozzle_temperature_initial_layer": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV08 PETG.json b/resources/profiles/Sovol/filament/Sovol SV08 PETG.json index 6f2a8f041d..f7e6676b0a 100644 --- a/resources/profiles/Sovol/filament/Sovol SV08 PETG.json +++ b/resources/profiles/Sovol/filament/Sovol SV08 PETG.json @@ -5,7 +5,7 @@ "name": "Sovol SV08 PETG", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PETG", + "inherits": "Generic PETG @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": [ "17" diff --git a/resources/profiles/Sovol/filament/Sovol SV08 PLA @SV08 0.2 nozzle.json b/resources/profiles/Sovol/filament/Sovol SV08 PLA @SV08 0.2 nozzle.json index 09a5db4744..35ad887591 100644 --- a/resources/profiles/Sovol/filament/Sovol SV08 PLA @SV08 0.2 nozzle.json +++ b/resources/profiles/Sovol/filament/Sovol SV08 PLA @SV08 0.2 nozzle.json @@ -5,7 +5,7 @@ "name": "Sovol SV08 PLA @SV08 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PLA", + "inherits": "Generic PLA @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["10"], "compatible_printers": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV08 PLA.json b/resources/profiles/Sovol/filament/Sovol SV08 PLA.json index fbf3fa6802..b47bfb6a81 100644 --- a/resources/profiles/Sovol/filament/Sovol SV08 PLA.json +++ b/resources/profiles/Sovol/filament/Sovol SV08 PLA.json @@ -5,7 +5,7 @@ "name": "Sovol SV08 PLA", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic PLA", + "inherits": "Generic PLA @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": ["21"], "compatible_printers": [ diff --git a/resources/profiles/Sovol/filament/Sovol SV08 TPU.json b/resources/profiles/Sovol/filament/Sovol SV08 TPU.json index aeefdaac18..25b2bddb80 100644 --- a/resources/profiles/Sovol/filament/Sovol SV08 TPU.json +++ b/resources/profiles/Sovol/filament/Sovol SV08 TPU.json @@ -5,7 +5,7 @@ "name": "Sovol SV08 TPU", "from": "system", "instantiation": "true", - "inherits": "Sovol Generic TPU", + "inherits": "Generic TPU @System", "filament_flow_ratio": ["0.98"], "filament_max_volumetric_speed": [ "3.6" diff --git a/resources/profiles/Sovol/filament/fdm_filament_abs.json b/resources/profiles/Sovol/filament/fdm_filament_abs.json deleted file mode 100644 index 1ada3b4ae1..0000000000 --- a/resources/profiles/Sovol/filament/fdm_filament_abs.json +++ /dev/null @@ -1,88 +0,0 @@ -{ - "type": "filament", - "name": "fdm_filament_abs", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_common", - "cool_plate_temp" : [ - "80" - ], - "eng_plate_temp" : [ - "80" - ], - "hot_plate_temp" : [ - "80" - ], - "textured_plate_temp" : [ - "80" - ], - "cool_plate_temp_initial_layer" : [ - "80" - ], - "eng_plate_temp_initial_layer" : [ - "80" - ], - "hot_plate_temp_initial_layer" : [ - "80" - ], - "textured_plate_temp_initial_layer" : [ - "80" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "30" - ], - "filament_max_volumetric_speed": [ - "0" - ], - "filament_type": [ - "ABS" - ], - "filament_density": [ - "1.10" - ], - "filament_cost": [ - "20" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_max_speed": [ - "5" - ], - "fan_min_speed": [ - "5" - ], - "overhang_fan_threshold": [ - "25%" - ], - "overhang_fan_speed": [ - "80" - ], - "nozzle_temperature": [ - "235" - ], - "temperature_vitrification": [ - "110" - ], - "nozzle_temperature_range_low": [ - "235" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "15" - ] -} diff --git a/resources/profiles/Sovol/filament/fdm_filament_common.json b/resources/profiles/Sovol/filament/fdm_filament_common.json deleted file mode 100644 index e8244c65c4..0000000000 --- a/resources/profiles/Sovol/filament/fdm_filament_common.json +++ /dev/null @@ -1,144 +0,0 @@ -{ - "type": "filament", - "name": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "cool_plate_temp" : [ - "60" - ], - "eng_plate_temp" : [ - "60" - ], - "hot_plate_temp" : [ - "60" - ], - "textured_plate_temp" : [ - "60" - ], - "cool_plate_temp_initial_layer" : [ - "60" - ], - "eng_plate_temp_initial_layer" : [ - "60" - ], - "hot_plate_temp_initial_layer" : [ - "60" - ], - "textured_plate_temp_initial_layer" : [ - "60" - ], - "overhang_fan_threshold": [ - "95%" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "filament_flow_ratio": [ - "1" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "fan_cooling_layer_time": [ - "60" - ], - "filament_cost": [ - "0" - ], - "filament_density": [ - "0" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_max_volumetric_speed": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_settings_id": [ - "" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "bed_type": [ - "Cool Plate" - ], - "nozzle_temperature_initial_layer": [ - "200" - ], - "full_fan_speed_layer": [ - "0" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "35" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; Filament gcode\n" - ], - "nozzle_temperature": [ - "200" - ], - "temperature_vitrification": [ - "100" - ] -} diff --git a/resources/profiles/Sovol/filament/fdm_filament_pet.json b/resources/profiles/Sovol/filament/fdm_filament_pet.json deleted file mode 100644 index 58fd5baf30..0000000000 --- a/resources/profiles/Sovol/filament/fdm_filament_pet.json +++ /dev/null @@ -1,82 +0,0 @@ -{ - "type": "filament", - "name": "fdm_filament_pet", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_common", - "cool_plate_temp" : [ - "85" - ], - "eng_plate_temp" : [ - "85" - ], - "hot_plate_temp" : [ - "85" - ], - "textured_plate_temp" : [ - "85" - ], - "cool_plate_temp_initial_layer" : [ - "85" - ], - "eng_plate_temp_initial_layer" : [ - "85" - ], - "hot_plate_temp_initial_layer" : [ - "85" - ], - "textured_plate_temp_initial_layer" : [ - "85" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "15" - ], - "filament_max_volumetric_speed": [ - "0" - ], - "filament_type": [ - "PETG" - ], - "filament_density": [ - "1.27" - ], - "filament_cost": [ - "30" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "overhang_fan_speed": [ - "50" - ], - "nozzle_temperature": [ - "235" - ], - "temperature_vitrification": [ - "80" - ], - "nozzle_temperature_range_low": [ - "235" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} diff --git a/resources/profiles/Sovol/filament/fdm_filament_pla.json b/resources/profiles/Sovol/filament/fdm_filament_pla.json deleted file mode 100644 index b5403a0855..0000000000 --- a/resources/profiles/Sovol/filament/fdm_filament_pla.json +++ /dev/null @@ -1,91 +0,0 @@ -{ - "type": "filament", - "name": "fdm_filament_pla", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_common", - "fan_cooling_layer_time": [ - "100" - ], - "filament_max_volumetric_speed": [ - "0" - ], - "filament_type": [ - "PLA" - ], - "filament_density": [ - "1.24" - ], - "filament_cost": [ - "20" - ], - "cool_plate_temp" : [ - "60" - ], - "eng_plate_temp" : [ - "60" - ], - "hot_plate_temp" : [ - "60" - ], - "textured_plate_temp" : [ - "60" - ], - "cool_plate_temp_initial_layer" : [ - "55" - ], - "eng_plate_temp_initial_layer" : [ - "55" - ], - "hot_plate_temp_initial_layer" : [ - "55" - ], - "textured_plate_temp_initial_layer" : [ - "55" - ], - "nozzle_temperature_initial_layer": [ - "205" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "nozzle_temperature": [ - "210" - ], - "temperature_vitrification": [ - "100" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "210" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "4" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} diff --git a/resources/profiles/Sovol/filament/fdm_filament_tpu.json b/resources/profiles/Sovol/filament/fdm_filament_tpu.json deleted file mode 100644 index 5a89993bd3..0000000000 --- a/resources/profiles/Sovol/filament/fdm_filament_tpu.json +++ /dev/null @@ -1,91 +0,0 @@ -{ - "type": "filament", - "name": "fdm_filament_tpu", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_common", - "fan_cooling_layer_time": [ - "100" - ], - "filament_max_volumetric_speed": [ - "0" - ], - "filament_type": [ - "PLA" - ], - "filament_density": [ - "1.24" - ], - "filament_cost": [ - "20" - ], - "cool_plate_temp" : [ - "60" - ], - "eng_plate_temp" : [ - "60" - ], - "hot_plate_temp" : [ - "60" - ], - "textured_plate_temp" : [ - "60" - ], - "cool_plate_temp_initial_layer" : [ - "55" - ], - "eng_plate_temp_initial_layer" : [ - "55" - ], - "hot_plate_temp_initial_layer" : [ - "55" - ], - "textured_plate_temp_initial_layer" : [ - "55" - ], - "nozzle_temperature_initial_layer": [ - "205" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "nozzle_temperature": [ - "210" - ], - "temperature_vitrification": [ - "100" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "210" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "4" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} diff --git a/resources/profiles/Sovol/machine/Sovol SV01 Pro 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV01 Pro 0.4 nozzle.json index a04e707cc3..292383e8a8 100644 --- a/resources/profiles/Sovol/machine/Sovol SV01 Pro 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV01 Pro 0.4 nozzle.json @@ -101,7 +101,7 @@ "change_filament_gcode": "M600", "machine_pause_gcode": "M0", "default_filament_profile": [ - "Sovol Generic PLA" + "Generic PLA @System" ], "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", diff --git a/resources/profiles/Sovol/machine/Sovol SV01 Pro.json b/resources/profiles/Sovol/machine/Sovol SV01 Pro.json index 5bc220c62c..35daf595c0 100644 --- a/resources/profiles/Sovol/machine/Sovol SV01 Pro.json +++ b/resources/profiles/Sovol/machine/Sovol SV01 Pro.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv01pro_buildplate_model.stl", "bed_texture": "sovol_sv01pro_buildplate_texture.png", "hotend_model": "", - "default_materials": "Sovol Generic ABS;Sovol Generic PETG;Sovol Generic PLA" + "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System" } diff --git a/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json index 9bb5c55d9f..12b15ca281 100644 --- a/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json @@ -133,7 +133,7 @@ "change_filament_gcode": "M600", "machine_pause_gcode": "M0", "default_filament_profile": [ - "Sovol Generic PLA" + "Generic PLA @System" ], "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0", "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", diff --git a/resources/profiles/Sovol/machine/Sovol SV02.json b/resources/profiles/Sovol/machine/Sovol SV02.json index 887e496425..f2872b91a1 100644 --- a/resources/profiles/Sovol/machine/Sovol SV02.json +++ b/resources/profiles/Sovol/machine/Sovol SV02.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv02_buildplate_model.stl", "bed_texture": "sovol_sv02_buildplate_texture.png", "hotend_model": "", - "default_materials": "Sovol Generic ABS;Sovol Generic PETG;Sovol Generic PLA" + "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System" } diff --git a/resources/profiles/Sovol/machine/Sovol SV05 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV05 0.4 nozzle.json index f4e169a391..9a12ce7d41 100644 --- a/resources/profiles/Sovol/machine/Sovol SV05 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV05 0.4 nozzle.json @@ -101,7 +101,7 @@ "change_filament_gcode": "M600", "machine_pause_gcode": "M0", "default_filament_profile": [ - "Sovol Generic PLA" + "Generic PLA @System" ], "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", diff --git a/resources/profiles/Sovol/machine/Sovol SV05.json b/resources/profiles/Sovol/machine/Sovol SV05.json index db85cba8d1..f86d320fa6 100644 --- a/resources/profiles/Sovol/machine/Sovol SV05.json +++ b/resources/profiles/Sovol/machine/Sovol SV05.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv05_buildplate_model.stl", "bed_texture": "sovol_sv05_buildplate_texture.png", "hotend_model": "", - "default_materials": "Sovol Generic ABS;Sovol Generic PETG;Sovol Generic PLA" + "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System" } diff --git a/resources/profiles/Sovol/machine/Sovol SV06 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 0.4 nozzle.json index 9fa2344888..1b4f426b75 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 0.4 nozzle.json @@ -104,7 +104,7 @@ "change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change", "machine_pause_gcode": "M601", "default_filament_profile": [ - "Sovol Generic PLA" + "Generic PLA @System" ], "machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n", "machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 Plus 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 Plus 0.4 nozzle.json index fa81ddaedb..34e2997d8a 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 Plus 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 Plus 0.4 nozzle.json @@ -104,7 +104,7 @@ "change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change", "machine_pause_gcode": "M601", "default_filament_profile": [ - "Sovol Generic PLA" + "Generic PLA @System" ], "machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n", "machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 Plus.json b/resources/profiles/Sovol/machine/Sovol SV06 Plus.json index 4b49fb45f1..b00bb3d508 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 Plus.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 Plus.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv06plus_buildplate_model.stl", "bed_texture": "sovol_sv06plus_buildplate_texture.png", "hotend_model": "", - "default_materials": "Sovol Generic ABS;Sovol Generic PETG;Sovol Generic PLA" + "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System" } diff --git a/resources/profiles/Sovol/machine/Sovol SV06.json b/resources/profiles/Sovol/machine/Sovol SV06.json index 10d943d1b2..695920de7f 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06.json +++ b/resources/profiles/Sovol/machine/Sovol SV06.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv06_buildplate_model.stl", "bed_texture": "sovol_sv06_buildplate_texture.png", "hotend_model": "", - "default_materials": "Sovol Generic ABS;Sovol Generic PETG;Sovol Generic PLA;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic ASA @System;Generic TPU @System;" + "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic ASA @System;Generic TPU @System;" } diff --git a/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json index 457b1efa8f..fe97cd5e58 100644 --- a/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json @@ -118,7 +118,7 @@ "change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change", "machine_pause_gcode": "M601", "default_filament_profile": [ - "Sovol Generic PLA" + "Generic PLA @System" ], "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single] ; Setting bed temprature\nM109 S[nozzle_temperature_initial_layer] ; Setting hot-end temprature\nSTART_PRINT ; Running macro from klipper\n", "machine_end_gcode": "END_PRINT", diff --git a/resources/profiles/Sovol/machine/Sovol SV07 Plus.json b/resources/profiles/Sovol/machine/Sovol SV07 Plus.json index 3533765e38..90b95696e1 100644 --- a/resources/profiles/Sovol/machine/Sovol SV07 Plus.json +++ b/resources/profiles/Sovol/machine/Sovol SV07 Plus.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv07plus_buildplate_model.stl", "bed_texture": "sovol_sv07plus_buildplate_texture.png", "hotend_model": "", - "default_materials": "Sovol Generic ABS;Sovol Generic PETG;Sovol Generic PLA" + "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System" }