diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M 0.4 Nozzle.json
index 6618bfee58..ad1801d0c8 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M 0.4 Nozzle.json	
@@ -12,7 +12,7 @@
   "bottom_shell_layers": "3",
   "bottom_shell_thickness": "0",
   "bridge_flow": "1",
-  "bridge_speed": "50",
+  "bridge_speed": "25",
   "brim_width": "5",
   "brim_object_gap": "0.1",
   "compatible_printers_condition": "",
@@ -29,7 +29,7 @@
   "infill_direction": "45",
   "sparse_infill_density": "15%",
   "sparse_infill_pattern": "grid",
-  "initial_layer_acceleration": "2000",
+  "initial_layer_acceleration": "500",
   "travel_acceleration": "10000",
   "inner_wall_acceleration": "5000",
   "initial_layer_line_width": "0.45",
diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json
index ccc66a8c6d..e431269ad9 100644
--- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json	
@@ -9,7 +9,7 @@
   "reduce_crossing_wall": "0",
   "max_travel_detour_distance": "0",
   "bottom_surface_pattern": "monotonic",
-  "bottom_shell_layers": "5",
+  "bottom_shell_layers": "3",
   "bottom_shell_thickness": "0",
   "bridge_flow": "1",
   "bridge_speed": "25",
@@ -29,9 +29,9 @@
   "infill_direction": "45",
   "sparse_infill_density": "15%",
   "sparse_infill_pattern": "grid",
-  "initial_layer_acceleration": "2000",
+  "initial_layer_acceleration": "500",
   "travel_acceleration": "10000",
-  "inner_wall_acceleration": "500",
+  "inner_wall_acceleration": "5000",
   "initial_layer_line_width": "0.45",
   "initial_layer_print_height": "0.2",
   "infill_combination": "0",
@@ -42,7 +42,7 @@
   "ironing_spacing": "0.1",
   "ironing_speed": "15",
   "ironing_type": "no ironing",
-  "layer_height": "0.12",
+  "layer_height": "0.2",
   "reduce_infill_retraction": "1",
   "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
   "detect_overhang_wall": "1",
@@ -57,7 +57,7 @@
   "seam_position": "aligned",
   "skirt_distance": "2",
   "skirt_height": "1",
-  "skirt_loops": "1",
+  "skirt_loops": "0",
   "minimum_sparse_infill_area": "15",
   "internal_solid_infill_line_width": "0.42",
   "spiral_mode": "0",
@@ -88,7 +88,7 @@
   "top_surface_line_width": "0.42",
   "top_shell_layers": "3",
   "top_shell_thickness": "0",
-  "initial_layer_speed": "15",
+  "initial_layer_speed": "50",
   "initial_layer_infill_speed": "80",
   "outer_wall_speed": "200",
   "inner_wall_speed": "300",
@@ -113,11 +113,12 @@
   "overhang_speed_classic": "1",
   "internal_bridge_speed": "50",
   "outer_wall_acceleration": "5000",
-  "internal_solid_fill_acceleration": "7000",
+  "internal_solid_infill_acceleration": "7000",
   "accel_to_decel_enable": "0",
   "filter_out_gap_fill": "0.5",
   "internal_bridge_support_thickness": "0.8",
   "support_bottom_z_distance": "0.18",
+  "wipe_speed": "200",
   "compatible_printers": [
     "Flashforge Adventurer 5M Pro 0.4 Nozzle"
   ]
diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M 0.6 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M 0.6 Nozzle.json
index ceeb29b4da..6e3302aa17 100644
--- a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M 0.6 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M 0.6 Nozzle.json	
@@ -12,7 +12,7 @@
   "bottom_shell_layers": "3",
   "bottom_shell_thickness": "0",
   "bridge_flow": "1",
-  "bridge_speed": "50",
+  "bridge_speed": "25",
   "brim_width": "5",
   "brim_object_gap": "0.1",
   "compatible_printers_condition": "",
@@ -29,7 +29,7 @@
   "infill_direction": "45",
   "sparse_infill_density": "15%",
   "sparse_infill_pattern": "grid",
-  "initial_layer_acceleration": "2000",
+  "initial_layer_acceleration": "500",
   "travel_acceleration": "10000",
   "inner_wall_acceleration": "5000",
   "initial_layer_line_width": "0.62",
diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json
index c3f02bb55b..08a0518188 100644
--- a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json	
+++ b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json	
@@ -16,7 +16,7 @@
   "bridge_density": "100%",
   "bridge_flow": "1",
   "bridge_no_support": "0",
-  "bridge_speed": "50",
+  "bridge_speed": "25",
   "brim_ears_detection_length": "1",
   "brim_ears_max_angle": "125",
   "brim_object_gap": "0.1",
@@ -60,7 +60,7 @@
   "infill_direction": "45",
   "infill_jerk": "9",
   "infill_wall_overlap": "15%",
-  "initial_layer_acceleration": "2000",
+  "initial_layer_acceleration": "500",
   "initial_layer_infill_speed": "65",
   "initial_layer_jerk": "9",
   "initial_layer_line_width": "0.62",
diff --git a/resources/profiles/Flashforge/process/fdm_process_klipper_common.json b/resources/profiles/Flashforge/process/fdm_process_klipper_common.json
index 111573307d..d8e99a26d8 100644
--- a/resources/profiles/Flashforge/process/fdm_process_klipper_common.json
+++ b/resources/profiles/Flashforge/process/fdm_process_klipper_common.json
@@ -11,7 +11,7 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "0.95",
-    "bridge_speed": "50",
+    "bridge_speed": "25",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers_condition": "",