GitHub-Proxy/OrcaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-25 07:24:25 +08:00
Code Issues Packages Projects Releases Wiki Activity

Update fdm_process_qidi_x3_common.json 11/13 (#2717)

Browse Source 
* 10-25

Add TPU-95A HF

* 1030

Adding Introduction of Chamber Temperature Control Macros(M191) to Notes

* 1102

Add ABS-GF10 profile，
Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file

* 1106

Add the PA value to some genetic filament profiles

* Update fdm_filament_pla.json

Change the fan rate of begin layers

* Update fdm_process_qidi_x3_common.json

Reduction of top surface particles

* Update fdm_process_qidi_x3_common.json

Add  M140 S90 to M191 macro, Preventing slow chamber warming in cold winter environments
This commit is contained in:
Hukete 2023-11-13 22:22:21 +08:00 committed by GitHub
parent 60424baac0
commit c03d58318a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
View File

@ -114,5 +114,5 @@
"internal_solid_infill_pattern": "monotonic",
"initial_layer_travel_speed": "50%",
"filter_out_gap_fill": "2",
"notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART \n\n[gcode_macro M191]\ngcode:\n #Parameters\n {% set s = params.S|float %}\n \n M141 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp\n {% if s != 0 %}\n TEMPERATURE_WAIT SENSOR=\"heater_generic hot\" MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)\n {% endif %}"
"notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART \n\n[gcode_macro M191]\ngcode:\n {% set s = params.S|float %}\n {% if s == 0 %}\n # If target temperature is 0, do nothing\n M117 Chamber heating cancelled\n {% else %}\n SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n M140 S90\n TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n M117 Chamber at target temperature\n {% endif %}"
}