diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json index 22a507b289..d3f38dc64f 100644 --- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json +++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "10%" @@ -31,7 +31,7 @@ "20" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json index aea117419f..73c403deda 100644 --- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json +++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json @@ -16,7 +16,7 @@ "8" ], "enable_pressure_advance": [ - "1" + "0" ], "pressure_advance": [ "0.032" diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json index 7f00939382..2afb746d58 100644 --- a/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "10%" @@ -31,7 +31,7 @@ "20" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json index e51861f40d..aabb4c3afd 100644 --- a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json @@ -16,7 +16,7 @@ "8" ], "enable_pressure_advance": [ - "1" + "0" ], "pressure_advance": [ "0.032" diff --git a/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json index 141c1caf15..bc3271196c 100644 --- a/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "10%" @@ -31,7 +31,7 @@ "20" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json index 139d025b6b..947b30484d 100644 --- a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json @@ -16,7 +16,7 @@ "8" ], "enable_pressure_advance": [ - "1" + "0" ], "pressure_advance": [ "0.032" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json index 2b7ad42520..4f9a44a409 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json @@ -50,7 +50,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "230" + "250" ], "reduce_fan_stop_start_freq": [ "1" @@ -68,7 +68,7 @@ "80" ], "nozzle_temperature": [ - "230" + "250" ], "temperature_vitrification": [ "110" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json index d2e30901f6..807d3139e8 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json @@ -50,7 +50,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "250" + "260" ], "reduce_fan_stop_start_freq": [ "1" @@ -68,7 +68,7 @@ "80" ], "nozzle_temperature": [ - "250" + "260" ], "temperature_vitrification": [ "110" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json index 4cc9edb309..7902947c11 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json @@ -53,7 +53,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "240" + "260" ], "reduce_fan_stop_start_freq": [ "0" @@ -68,7 +68,7 @@ "40" ], "nozzle_temperature": [ - "240" + "260" ], "temperature_vitrification": [ "108" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json index e6e6810b6a..406073c512 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json @@ -53,7 +53,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "260" + "270" ], "reduce_fan_stop_start_freq": [ "0" @@ -68,7 +68,7 @@ "40" ], "nozzle_temperature": [ - "260" + "270" ], "temperature_vitrification": [ "108" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json index 977729341f..8d73e7ec19 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json @@ -53,7 +53,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "240" + "260" ], "reduce_fan_stop_start_freq": [ "0" @@ -71,7 +71,7 @@ "60" ], "nozzle_temperature": [ - "240" + "260" ], "temperature_vitrification": [ "140" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json index 731c700f5e..3d874c4b04 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json @@ -53,7 +53,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "260" + "270" ], "reduce_fan_stop_start_freq": [ "0" @@ -71,7 +71,7 @@ "60" ], "nozzle_temperature": [ - "260" + "270" ], "temperature_vitrification": [ "140" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json index 09d5310c17..2779a0e9f2 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json @@ -53,7 +53,7 @@ "30" ], "nozzle_temperature_initial_layer": [ - "220" + "245" ], "reduce_fan_stop_start_freq": [ "1" @@ -68,7 +68,7 @@ "90" ], "nozzle_temperature": [ - "220" + "245" ], "temperature_vitrification": [ "80" @@ -80,7 +80,7 @@ "280" ], "additional_cooling_fan_speed": [ - "100" + "0" ], "filament_start_gcode": [ "; filament start gcode\n" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json index e5abf0d738..f8c4494332 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json @@ -53,7 +53,7 @@ "30" ], "nozzle_temperature_initial_layer": [ - "230" + "255" ], "reduce_fan_stop_start_freq": [ "1" @@ -68,7 +68,7 @@ "90" ], "nozzle_temperature": [ - "230" + "255" ], "temperature_vitrification": [ "80" @@ -80,7 +80,7 @@ "280" ], "additional_cooling_fan_speed": [ - "100" + "0" ], "filament_start_gcode": [ "; filament start gcode\n" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json index 0bbf0700f3..979b1fd21a 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json @@ -47,7 +47,7 @@ "60" ], "nozzle_temperature_initial_layer": [ - "200" + "220" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,7 +71,7 @@ "1" ], "nozzle_temperature": [ - "195" + "220" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json index 0efe00c727..258291b529 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json @@ -47,7 +47,7 @@ "60" ], "nozzle_temperature_initial_layer": [ - "200" + "220" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,7 +71,7 @@ "1" ], "nozzle_temperature": [ - "195" + "220" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json index 873af639ce..f3a30afc35 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json @@ -47,7 +47,7 @@ "60" ], "nozzle_temperature_initial_layer": [ - "205" + "220" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,7 +71,7 @@ "1" ], "nozzle_temperature": [ - "205" + "220" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json index 1bdc487991..5e3de73ae1 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json @@ -47,7 +47,7 @@ "60" ], "nozzle_temperature_initial_layer": [ - "205" + "220" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,7 +71,7 @@ "1" ], "nozzle_temperature": [ - "205" + "220" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json index cb6104e08c..32ed84f0c9 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json @@ -48,7 +48,7 @@ ], "nozzle_temperature_initial_layer": [ - "210" + "230" ], "reduce_fan_stop_start_freq": [ "1" @@ -72,7 +72,7 @@ "1" ], "nozzle_temperature": [ - "210" + "230" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json index 2f449cb2f2..53b49f7857 100644 --- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json @@ -48,7 +48,7 @@ ], "nozzle_temperature_initial_layer": [ - "220" + "230" ], "reduce_fan_stop_start_freq": [ "1" @@ -72,7 +72,7 @@ "1" ], "nozzle_temperature": [ - "220" + "230" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_abs.json b/resources/profiles/FlyingBear/filament/fdm_filament_abs.json index 23952b651f..8314c953c0 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_abs.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_abs.json @@ -50,7 +50,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "230" + "250" ], "reduce_fan_stop_start_freq": [ "1" @@ -68,7 +68,7 @@ "80" ], "nozzle_temperature": [ - "230" + "250" ], "temperature_vitrification": [ "110" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json index 79003f4129..d4a2ad1183 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json @@ -53,7 +53,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "240" + "260" ], "reduce_fan_stop_start_freq": [ "0" @@ -68,7 +68,7 @@ "40" ], "nozzle_temperature": [ - "240" + "260" ], "temperature_vitrification": [ "108" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pc.json b/resources/profiles/FlyingBear/filament/fdm_filament_pc.json index 589ae19b4e..a1edd95671 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_pc.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_pc.json @@ -53,7 +53,7 @@ "20" ], "nozzle_temperature_initial_layer": [ - "240" + "260" ], "reduce_fan_stop_start_freq": [ "0" @@ -71,7 +71,7 @@ "60" ], "nozzle_temperature": [ - "240" + "260" ], "temperature_vitrification": [ "140" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pet.json b/resources/profiles/FlyingBear/filament/fdm_filament_pet.json index 389942acf7..8beaffd58b 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_pet.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_pet.json @@ -53,7 +53,7 @@ "30" ], "nozzle_temperature_initial_layer": [ - "220" + "245" ], "reduce_fan_stop_start_freq": [ "1" @@ -68,7 +68,7 @@ "90" ], "nozzle_temperature": [ - "220" + "245" ], "temperature_vitrification": [ "80" @@ -80,7 +80,7 @@ "280" ], "additional_cooling_fan_speed": [ - "100" + "0" ], "filament_start_gcode": [ "; filament start gcode\n" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json index 3855f25b66..4c42035fc3 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json @@ -47,7 +47,7 @@ "60" ], "nozzle_temperature_initial_layer": [ - "200" + "220" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,7 +71,7 @@ "1" ], "nozzle_temperature": [ - "195" + "220" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json index 05c348ce5e..02b6187305 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json @@ -47,7 +47,7 @@ "60" ], "nozzle_temperature_initial_layer": [ - "200" + "220" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,7 +71,7 @@ "1" ], "nozzle_temperature": [ - "195" + "220" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json b/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json index 6a335be746..cc8aee7552 100644 --- a/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json +++ b/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json @@ -48,7 +48,7 @@ ], "nozzle_temperature_initial_layer": [ - "210" + "230" ], "reduce_fan_stop_start_freq": [ "1" @@ -72,7 +72,7 @@ "1" ], "nozzle_temperature": [ - "210" + "230" ], "temperature_vitrification": [ "60" diff --git a/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json index 124619ba7f..483fa64e92 100644 --- a/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json +++ b/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json @@ -8,19 +8,21 @@ "inner_wall_acceleration": "3000", "bottom_shell_layers": "7", - "overhang_1_4_speed": "60", + "overhang_1_4_speed": "30", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "top_shell_layers": "9", "top_shell_thickness": "0.8", "tree_support_wall_count": "1", "brim_width": "5", - "gap_infill_speed": "350", - "inner_wall_speed": "350", - "internal_solid_infill_speed": "350", + "gap_infill_speed": "120", + "outer_wall_speed": "60", + "inner_wall_speed": "120", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", "layer_height": "0.08", "print_settings_id": "0.08mm Extra Fine @InfiMech TX", - "sparse_infill_speed": "450", + "sparse_infill_speed": "150", "exclude_object": "1", "internal_bridge_speed": "50", "compatible_printers": [ diff --git a/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json index f725af6340..56a649735c 100644 --- a/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json +++ b/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json @@ -8,19 +8,21 @@ "inner_wall_acceleration": "3000", "bottom_shell_layers": "5", - "overhang_1_4_speed": "50", + "overhang_1_4_speed": "30", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "top_shell_layers": "5", "top_shell_thickness": "0.6", "tree_support_wall_count": "0", "brim_width": "5", - "gap_infill_speed": "350", - "inner_wall_speed": "350", - "internal_solid_infill_speed": "350", + "gap_infill_speed": "180", + "outer_wall_speed": "80", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "180", + "top_surface_speed": "150", "layer_height": "0.12", "print_settings_id": "0.12mm Fine @InfiMech TX", - "sparse_infill_speed": "400", + "sparse_infill_speed": "180", "exclude_object": "1", "internal_bridge_speed": "50", "compatible_printers": [ diff --git a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json index a5d9abd3a5..22ceae74e7 100644 --- a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json +++ b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json @@ -16,8 +16,9 @@ "bridge_speed": "25", "brim_object_gap": "0.1", "exclude_object": "1", - "gap_infill_speed": "300", - "inner_wall_speed": "300", + "gap_infill_speed": "250", + "inner_wall_speed": "250", + "outer_wall_speed": "120", "internal_bridge_speed": "50", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "300", diff --git a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json index e155b9a092..1930525085 100644 --- a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json +++ b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json @@ -9,19 +9,21 @@ "inner_wall_acceleration": "3000", "bottom_shell_layers": "7", - "overhang_1_4_speed": "50", + "overhang_1_4_speed": "30", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "top_shell_layers": "9", "top_shell_thickness": "0.8", "tree_support_wall_count": "1", "brim_width": "5", - "gap_infill_speed": "350", - "inner_wall_speed": "350", - "internal_solid_infill_speed": "350", + "gap_infill_speed": "120", + "outer_wall_speed": "60", + "inner_wall_speed": "120", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", "layer_height": "0.08", "print_settings_id": "0.08mm Extra Fine @FlyingBear S1", - "sparse_infill_speed": "450", + "sparse_infill_speed": "150", "exclude_object": "1", "internal_bridge_speed": "50", "compatible_printers": [ diff --git a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json index 8b72568142..0deb01db1b 100644 --- a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json +++ b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json @@ -8,19 +8,21 @@ "inner_wall_acceleration": "3000", "bottom_shell_layers": "5", - "overhang_1_4_speed": "50", + "overhang_1_4_speed": "30", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "top_shell_layers": "5", "top_shell_thickness": "0.6", "tree_support_wall_count": "0", "brim_width": "5", - "gap_infill_speed": "350", - "inner_wall_speed": "350", - "internal_solid_infill_speed": "350", + "gap_infill_speed": "180", + "outer_wall_speed": "80", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "180", + "top_surface_speed": "150", "layer_height": "0.12", "print_settings_id": "0.12mm Fine @FlyingBear S1", - "sparse_infill_speed": "400", + "sparse_infill_speed": "180", "exclude_object": "1", "internal_bridge_speed": "50", "compatible_printers": [ diff --git a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json index 4e8e277710..a8afda5cf2 100644 --- a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json +++ b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json @@ -16,8 +16,9 @@ "bridge_speed": "25", "brim_object_gap": "0.1", "exclude_object": "1", - "gap_infill_speed": "300", - "inner_wall_speed": "300", + "gap_infill_speed": "250", + "inner_wall_speed": "250", + "outer_wall_speed": "120", "internal_bridge_speed": "50", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "300",