mirror of
https://git.mirrors.martin98.com/https://github.com/SoftFever/OrcaSlicer.git
synced 2025-08-05 16:10:39 +08:00
Add Elegoo OrangeStorm Giga (#6977)
Closes #6256 Thanks to @tlhintoq for providing the profiles in a easily downloadable manner.
This commit is contained in:
SoftFever
GitHub
commit
cc8d90c224
@ -55,6 +55,10 @@
|
|||||||
{
|
{
|
||||||
"name": "Elegoo Neptune 4 Plus",
|
"name": "Elegoo Neptune 4 Plus",
|
||||||
"sub_path": "machine/Elegoo Neptune 4 Plus.json"
|
"sub_path": "machine/Elegoo Neptune 4 Plus.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo OrangeStorm Giga",
|
||||||
|
"sub_path": "machine/Elegoo OrangeStorm Giga.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"process_list": [
|
"process_list": [
|
||||||
@ -74,6 +78,22 @@
|
|||||||
"name": "fdm_process_neptune4max_common",
|
"name": "fdm_process_neptune4max_common",
|
||||||
"sub_path": "process/fdm_process_neptune4max_common.json"
|
"sub_path": "process/fdm_process_neptune4max_common.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_process_elegoo_04020",
|
||||||
|
"sub_path": "process/fdm_process_elegoo_04020.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_process_elegoo_06030",
|
||||||
|
"sub_path": "process/fdm_process_elegoo_06030.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_process_elegoo_08040",
|
||||||
|
"sub_path": "process/fdm_process_elegoo_08040.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_process_elegoo_10050",
|
||||||
|
"sub_path": "process/fdm_process_elegoo_10050.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "0.08mm Extra Fine @Elegoo Neptune",
|
"name": "0.08mm Extra Fine @Elegoo Neptune",
|
||||||
"sub_path": "process/0.08mm Extra Fine @Elegoo Neptune.json"
|
"sub_path": "process/0.08mm Extra Fine @Elegoo Neptune.json"
|
||||||
@ -673,6 +693,86 @@
|
|||||||
{
|
{
|
||||||
"name": "0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle)",
|
"name": "0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle)",
|
||||||
"sub_path": "process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json"
|
"sub_path": "process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"sub_path": "process/0.20mm Standard @Elegoo Giga 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
|
||||||
|
"sub_path": "process/0.50mm Standard @Elegoo Giga 1.0 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.60mm Draft @Elegoo Giga 1.0 nozzle",
|
||||||
|
"sub_path": "process/0.60mm Draft @Elegoo Giga 1.0 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"sub_path": "process/0.40mm Standard @Elegoo Giga 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle",
|
||||||
|
"sub_path": "process/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.48mm Draft @Elegoo Giga 0.8 nozzle",
|
||||||
|
"sub_path": "process/0.48mm Draft @Elegoo Giga 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"sub_path": "process/0.30mm Standard @Elegoo Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle",
|
||||||
|
"sub_path": "process/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle",
|
||||||
|
"sub_path": "process/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.36mm Draft @Elegoo Giga 0.6 nozzle",
|
||||||
|
"sub_path": "process/0.36mm Draft @Elegoo Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle",
|
||||||
|
"sub_path": "process/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.30mm Strength @Elegoo Giga 0.6 nozzle",
|
||||||
|
"sub_path": "process/0.30mm Strength @Elegoo Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.30mm Fine @Elegoo Giga 1.0 nozzle",
|
||||||
|
"sub_path": "process/0.30mm Fine @Elegoo Giga 1.0 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle",
|
||||||
|
"sub_path": "process/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle",
|
||||||
|
"sub_path": "process/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.24mm Fine @Elegoo Giga 0.8 nozzle",
|
||||||
|
"sub_path": "process/0.24mm Fine @Elegoo Giga 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.24mm Draft @Elegoo Giga 0.4 nozzle",
|
||||||
|
"sub_path": "process/0.24mm Draft @Elegoo Giga 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm Strength @Elegoo Giga 0.4 nozzle",
|
||||||
|
"sub_path": "process/0.20mm Strength @Elegoo Giga 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.18mm Fine @Elegoo Giga 0.6 nozzle",
|
||||||
|
"sub_path": "process/0.18mm Fine @Elegoo Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle",
|
||||||
|
"sub_path": "process/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"filament_list": [
|
"filament_list": [
|
||||||
@ -692,6 +792,10 @@
|
|||||||
"name": "fdm_filament_pla",
|
"name": "fdm_filament_pla",
|
||||||
"sub_path": "filament/fdm_filament_pla.json"
|
"sub_path": "filament/fdm_filament_pla.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_filament_asa",
|
||||||
|
"sub_path": "filament/fdm_filament_asa.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "Elegoo Generic ABS",
|
"name": "Elegoo Generic ABS",
|
||||||
"sub_path": "filament/Elegoo Generic ABS.json"
|
"sub_path": "filament/Elegoo Generic ABS.json"
|
||||||
@ -703,6 +807,34 @@
|
|||||||
{
|
{
|
||||||
"name": "Elegoo Generic PLA",
|
"name": "Elegoo Generic PLA",
|
||||||
"sub_path": "filament/Elegoo Generic PLA.json"
|
"sub_path": "filament/Elegoo Generic PLA.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo Generic PLA Matte",
|
||||||
|
"sub_path": "filament/Elegoo Generic PLA Matte.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo Generic ASA",
|
||||||
|
"sub_path": "filament/Elegoo Generic ASA.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo Generic PETG PRO",
|
||||||
|
"sub_path": "filament/Elegoo Generic PETG PRO.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo ASA @Elegoo Giga",
|
||||||
|
"sub_path": "filament/Elegoo ASA @Elegoo Giga.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||||
|
"sub_path": "filament/Elegoo PETG PRO @Elegoo Giga.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo PLA @Elegoo Giga",
|
||||||
|
"sub_path": "filament/Elegoo PLA @Elegoo Giga.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||||
|
"sub_path": "filament/Elegoo PLA Matte @Elegoo Giga.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"machine_list": [
|
"machine_list": [
|
||||||
@ -718,6 +850,10 @@
|
|||||||
"name": "fdm_neptune_4_common",
|
"name": "fdm_neptune_4_common",
|
||||||
"sub_path": "machine/fdm_neptune_4_common.json"
|
"sub_path": "machine/fdm_neptune_4_common.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_elegoo_3dp_001_common",
|
||||||
|
"sub_path": "machine/fdm_elegoo_3dp_001_common.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "Elegoo Neptune 0.4 nozzle",
|
"name": "Elegoo Neptune 0.4 nozzle",
|
||||||
"sub_path": "machine/Elegoo Neptune 0.4 nozzle.json"
|
"sub_path": "machine/Elegoo Neptune 0.4 nozzle.json"
|
||||||
@ -817,6 +953,22 @@
|
|||||||
{
|
{
|
||||||
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
|
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
|
||||||
"sub_path": "machine/Elegoo Neptune 4 Pro (0.8 nozzle).json"
|
"sub_path": "machine/Elegoo Neptune 4 Pro (0.8 nozzle).json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"sub_path": "machine/Elegoo OrangeStorm Giga 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo OrangeStorm Giga 1.0 nozzle",
|
||||||
|
"sub_path": "machine/Elegoo OrangeStorm Giga 1.0 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||||
|
"sub_path": "machine/Elegoo OrangeStorm Giga 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||||
|
"sub_path": "machine/Elegoo OrangeStorm Giga 0.8 nozzle.json"
|
||||||
}
|
}
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
BIN
resources/profiles/Elegoo/Elegoo OrangeStorm Giga_cover.png
Normal file
BIN
resources/profiles/Elegoo/Elegoo OrangeStorm Giga_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 15 KiB |
10418
resources/profiles/Elegoo/elegoo_orangestorm_giga_buildplate_model.stl
Normal file
10418
resources/profiles/Elegoo/elegoo_orangestorm_giga_buildplate_model.stl
Normal file
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 3.4 MiB |
@ -0,0 +1,25 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFB98",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"name": "Elegoo ASA @Elegoo Giga",
|
||||||
|
"inherits": "Elegoo Generic ASA",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
|
|
||||||
18
resources/profiles/Elegoo/filament/Elegoo Generic ASA.json
Normal file
18
resources/profiles/Elegoo/filament/Elegoo Generic ASA.json
Normal file
@ -0,0 +1,18 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFB98",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"name": "Elegoo Generic ASA",
|
||||||
|
"inherits": "fdm_filament_asa",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"filament_vendor": [
|
||||||
|
"Elegoo"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.1"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,81 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFG99",
|
||||||
|
"setting_id": "GFSG99",
|
||||||
|
"name": "Elegoo Generic PETG PRO",
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.25"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Elegoo"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"10%"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"; Filament start gcode\n"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; filament end gcode \n"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,21 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFL99",
|
||||||
|
"setting_id": "GFSL99",
|
||||||
|
"name": "Elegoo Generic PLA Matte",
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"filament_cost": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.25"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Elegoo"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"; filament start gcode\n"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,18 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFG99",
|
||||||
|
"setting_id": "GFSG99",
|
||||||
|
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||||
|
"inherits": "Elegoo Generic PETG PRO",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"21"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,18 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFL99",
|
||||||
|
"setting_id": "GFSL99",
|
||||||
|
"name": "Elegoo PLA @Elegoo Giga",
|
||||||
|
"inherits": "Elegoo Generic PLA",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,42 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFL99",
|
||||||
|
"setting_id": "GFSL99",
|
||||||
|
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||||
|
"inherits": "Elegoo Generic PLA Matte",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"6"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||||
|
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
82
resources/profiles/Elegoo/filament/fdm_filament_asa.json
Normal file
82
resources/profiles/Elegoo/filament/fdm_filament_asa.json
Normal file
@ -0,0 +1,82 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "fdm_filament_asa",
|
||||||
|
"inherits": "fdm_filament_common",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "false",
|
||||||
|
"activate_air_filtration": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.04"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"16"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"ASA"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"280"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"25%"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"90"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -1,32 +1,67 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"name": "fdm_filament_pet",
|
"name": "fdm_filament_pet",
|
||||||
"from": "system",
|
"inherits": "fdm_filament_common",
|
||||||
"instantiation": "false",
|
"from": "system",
|
||||||
"inherits": "fdm_filament_common",
|
"instantiation": "false",
|
||||||
"cool_plate_temp": ["70"],
|
"eng_plate_temp": [
|
||||||
"eng_plate_temp": ["70"],
|
"0"
|
||||||
"hot_plate_temp": ["70"],
|
],
|
||||||
"textured_plate_temp": ["70"],
|
"eng_plate_temp_initial_layer": [
|
||||||
"cool_plate_temp_initial_layer": ["70"],
|
"0"
|
||||||
"eng_plate_temp_initial_layer": ["70"],
|
],
|
||||||
"hot_plate_temp_initial_layer": ["70"],
|
"fan_cooling_layer_time": [
|
||||||
"textured_plate_temp_initial_layer": ["70"],
|
"20"
|
||||||
"slow_down_for_layer_cooling": ["1"],
|
],
|
||||||
"close_fan_the_first_x_layers": ["3"],
|
"fan_min_speed": [
|
||||||
"fan_cooling_layer_time": ["20"],
|
"20"
|
||||||
"filament_max_volumetric_speed": ["8"],
|
],
|
||||||
"filament_type": ["PETG"],
|
"filament_cost": [
|
||||||
"filament_density": ["1.27"],
|
"0"
|
||||||
"filament_cost": ["20"],
|
],
|
||||||
"nozzle_temperature_initial_layer": ["240"],
|
"filament_density": [
|
||||||
"reduce_fan_stop_start_freq": ["1"],
|
"1.27"
|
||||||
"fan_max_speed": ["50"],
|
],
|
||||||
"fan_min_speed": ["20"],
|
"filament_max_volumetric_speed": [
|
||||||
"overhang_fan_speed": ["100"],
|
"12"
|
||||||
"nozzle_temperature": ["240"],
|
],
|
||||||
"temperature_vitrification": ["80"],
|
"filament_type": [
|
||||||
"nozzle_temperature_range_low": ["235"],
|
"PETG"
|
||||||
"nozzle_temperature_range_high": ["240"],
|
],
|
||||||
"filament_start_gcode": ["; filament start gcode\n"]
|
"hot_plate_temp": [
|
||||||
}
|
"80"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"; Filament start gcode\n"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; filament end gcode \n"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,92 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"setting_id": "EOSG04",
|
||||||
|
"name": "Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_elegoo_3dp_001_common",
|
||||||
|
"printer_model": "Elegoo OrangeStorm Giga",
|
||||||
|
"printer_variant": "0.4",
|
||||||
|
"printer_structure": "i3",
|
||||||
|
"default_print_profile": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"810x0",
|
||||||
|
"810x805",
|
||||||
|
"0x805"
|
||||||
|
],
|
||||||
|
"printable_height": [
|
||||||
|
"1010"
|
||||||
|
],
|
||||||
|
"retract_lift_below": [
|
||||||
|
"1010"
|
||||||
|
],
|
||||||
|
"auxiliary_fan": "0",
|
||||||
|
"default_filament_profile": [
|
||||||
|
"Elegoo PLA @Elegoo Giga"
|
||||||
|
],
|
||||||
|
"machine_load_filament_time": "25",
|
||||||
|
"machine_max_acceleration_extruding": [
|
||||||
|
"5000",
|
||||||
|
"5000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"5000",
|
||||||
|
"5000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"5000",
|
||||||
|
"5000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"300",
|
||||||
|
"300"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_travel": [
|
||||||
|
"5000",
|
||||||
|
"5000"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_e": [
|
||||||
|
"3",
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"30",
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"retraction_speed": [
|
||||||
|
"45"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_z": [
|
||||||
|
"2",
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"60",
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"extruder_clearance_height_to_lid": "120",
|
||||||
|
"extruder_clearance_height_to_rod": "65",
|
||||||
|
"extruder_clearance_radius": "65",
|
||||||
|
"fan_speedup_time": "0.5",
|
||||||
|
"thumbnails_format": "COLPIC",
|
||||||
|
"thumbnails": [
|
||||||
|
"400x400/COLPIC",
|
||||||
|
"114x114/COLPIC",
|
||||||
|
"160x160/PNG"
|
||||||
|
],
|
||||||
|
"machine_unload_filament_time": "29",
|
||||||
|
"nozzle_height": "4.76",
|
||||||
|
"nozzle_volume": "125",
|
||||||
|
"scan_first_layer": "0",
|
||||||
|
"time_lapse_gcode": "",
|
||||||
|
"gcode_flavor": "klipper",
|
||||||
|
"change_filament_gcode": "M600",
|
||||||
|
"machine_pause_gcode": "PAUSE",
|
||||||
|
"machine_start_gcode": ";;===== date: 20240520 =====================\n;Machine_use_extruders:1\n;TIME:\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG90\nG28 ;home\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.75-50} Y0.5 F6000\n;\n;Giga zoned hot bed control\n;Case 1\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.75+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.75+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||||
|
"machine_end_gcode": ";PRINT_END\nG90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X30 Y30 Z{min(max_layer_z+200, printable_height)} E-5 F{travel_speed*60} ; Move print head up\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||||
|
"layer_change_gcode": ";LAYER:{layer_num+1}\n{if layer_num > 0 and layer_num < 3}\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n\n{endif}"
|
||||||
|
}
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||||
|
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "EOSG06",
|
||||||
|
"instantiation": "true",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"printer_model": "Elegoo OrangeStorm Giga",
|
||||||
|
"printer_variant": "0.6",
|
||||||
|
"default_filament_profile": [
|
||||||
|
"Elegoo PLA @Elegoo Giga"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"retraction_minimum_travel": [
|
||||||
|
"1.2"
|
||||||
|
],
|
||||||
|
"wipe_distance": [
|
||||||
|
"1.8"
|
||||||
|
],
|
||||||
|
"retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.42"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.12"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||||
|
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "EOSG08",
|
||||||
|
"instantiation": "true",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_model": "Elegoo OrangeStorm Giga",
|
||||||
|
"printer_variant": "0.8",
|
||||||
|
"default_filament_profile": [
|
||||||
|
"Elegoo PLA @Elegoo Giga"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"retraction_minimum_travel": [
|
||||||
|
"1.6"
|
||||||
|
],
|
||||||
|
"wipe_distance": [
|
||||||
|
"2.0"
|
||||||
|
],
|
||||||
|
"retraction_length": [
|
||||||
|
"1.2"
|
||||||
|
],
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.56"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.16"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "Elegoo OrangeStorm Giga 1.0 nozzle",
|
||||||
|
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "EOSG10",
|
||||||
|
"instantiation": "true",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"1.0"
|
||||||
|
],
|
||||||
|
"printer_model": "Elegoo OrangeStorm Giga",
|
||||||
|
"printer_variant": "1.0",
|
||||||
|
"default_filament_profile": [
|
||||||
|
"Elegoo PLA @Elegoo Giga"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
|
||||||
|
"retraction_minimum_travel": [
|
||||||
|
"2.0"
|
||||||
|
],
|
||||||
|
"wipe_distance": [
|
||||||
|
"2.0"
|
||||||
|
],
|
||||||
|
"retraction_length": [
|
||||||
|
"1.5"
|
||||||
|
],
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.7"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.2"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,12 @@
|
|||||||
|
{
|
||||||
|
"type": "machine_model",
|
||||||
|
"name": "Elegoo OrangeStorm Giga",
|
||||||
|
"model_id": "Elegoo-OrangeStorm-Giga",
|
||||||
|
"nozzle_diameter": "0.4;0.6;0.8;1.0",
|
||||||
|
"bed_model": "elegoo_orangestorm_giga_buildplate_model.stl",
|
||||||
|
"bed_texture": "elegoo_orangestorm_giga_buildplate_texture.png",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"family": "Elegoo",
|
||||||
|
"hotend_model": "",
|
||||||
|
"default_materials": "Elegoo PLA @Elegoo Giga;Elegoo PETG PRO @Elegoo Giga;Elegoo ABS @Elegoo Giga;Elegoo PLA Silk"
|
||||||
|
}
|
||||||
142
resources/profiles/Elegoo/machine/fdm_elegoo_3dp_001_common.json
Normal file
142
resources/profiles/Elegoo/machine/fdm_elegoo_3dp_001_common.json
Normal file
@ -0,0 +1,142 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "fdm_elegoo_3dp_001_common",
|
||||||
|
"inherits": "fdm_machine_common",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "false",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.4",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"256x0",
|
||||||
|
"256x256",
|
||||||
|
"0x256"
|
||||||
|
],
|
||||||
|
"auxiliary_fan": "1",
|
||||||
|
"bed_exclude_area": [
|
||||||
|
"0x0"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"Elegoo Generic PLA"
|
||||||
|
],
|
||||||
|
"extruder_colour": [
|
||||||
|
"#018001"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_e": [
|
||||||
|
"5000",
|
||||||
|
"5000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_extruding": [
|
||||||
|
"20000",
|
||||||
|
"20000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_retracting": [
|
||||||
|
"5000",
|
||||||
|
"5000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_travel": [
|
||||||
|
"9000",
|
||||||
|
"9000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"20000",
|
||||||
|
"20000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"20000",
|
||||||
|
"20000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"500",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"30",
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"20",
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_e": [
|
||||||
|
"2.5",
|
||||||
|
"2.5"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_x": [
|
||||||
|
"9",
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_y": [
|
||||||
|
"9",
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_z": [
|
||||||
|
"3",
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"machine_min_extruding_rate": [
|
||||||
|
"0",
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"machine_min_travel_rate": [
|
||||||
|
"0",
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retract_lift_below":[
|
||||||
|
"249"
|
||||||
|
],
|
||||||
|
"extruder_clearance_radius": "57",
|
||||||
|
"extruder_clearance_max_radius": "68",
|
||||||
|
"extruder_clearance_height_to_lid": "90",
|
||||||
|
"nozzle_volume": "107",
|
||||||
|
"printer_structure": "corexy",
|
||||||
|
"best_object_pos":"0.5x0.5",
|
||||||
|
"retraction_minimum_travel": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"retract_before_wipe": [
|
||||||
|
"0%"
|
||||||
|
],
|
||||||
|
"wipe_distance": [
|
||||||
|
"1.2"
|
||||||
|
],
|
||||||
|
"retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"retract_length_toolchange": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"z_hop": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"retraction_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"deretraction_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"z_hop_types": [
|
||||||
|
"Auto Lift"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"320x320",
|
||||||
|
"160x160"
|
||||||
|
],
|
||||||
|
"thumbnails_format": "PNG",
|
||||||
|
"nozzle_type": "brass",
|
||||||
|
"single_extruder_multi_material": "1",
|
||||||
|
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
|
||||||
|
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
|
||||||
|
"change_filament_gcode": "",
|
||||||
|
"machine_pause_gcode": "M600"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"layer_height": "0.16",
|
||||||
|
"name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,8 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"layer_height": "0.18",
|
||||||
|
"name": "0.18mm Fine @Elegoo Giga 0.6 nozzle",
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.6 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,14 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"inherits": "fdm_process_elegoo_04020",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "PEOSG04020",
|
||||||
|
"instantiation": "true",
|
||||||
|
"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||||
|
"initial_layer_print_height": "0.25",
|
||||||
|
"print_flow_ratio": "1.0",
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.4 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"name": "0.20mm Strength @Elegoo Giga 0.4 nozzle",
|
||||||
|
"wall_loops": "6"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"layer_height": "0.24",
|
||||||
|
"name": "0.24mm Draft @Elegoo Giga 0.4 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"layer_height": "0.24",
|
||||||
|
"name": "0.24mm Fine @Elegoo Giga 0.8 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"layer_height": "0.24",
|
||||||
|
"name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
|
||||||
|
"layer_height": "0.28",
|
||||||
|
"name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
|
||||||
|
"layer_height": "0.3",
|
||||||
|
"name": "0.30mm Fine @Elegoo Giga 1.0 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,31 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"inherits": "fdm_process_elegoo_06030",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "PEOSG06030",
|
||||||
|
"instantiation": "true",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||||
|
"initial_layer_acceleration": "1000",
|
||||||
|
"inner_wall_acceleration": "3000",
|
||||||
|
"is_custom_defined": "0",
|
||||||
|
"make_overhang_printable_angle": "90",
|
||||||
|
"outer_wall_acceleration": "2000",
|
||||||
|
"resolution": "0.05",
|
||||||
|
"thick_internal_bridges": "0",
|
||||||
|
"top_shell_layers": "4",
|
||||||
|
"travel_acceleration": "3000",
|
||||||
|
"travel_speed": "300",
|
||||||
|
"detect_thin_wall": "0",
|
||||||
|
"bridge_speed": "50",
|
||||||
|
"sparse_infill_speed": "250",
|
||||||
|
"initial_layer_infill_speed": "80",
|
||||||
|
"initial_layer_speed": "55",
|
||||||
|
"internal_solid_infill_speed": "200",
|
||||||
|
"overhang_3_4_speed": "25",
|
||||||
|
"print_flow_ratio": "1.0",
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.6 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"name": "0.30mm Strength @Elegoo Giga 0.6 nozzle",
|
||||||
|
"wall_loops": "5"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"layer_height": "0.32",
|
||||||
|
"name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"layer_height": "0.36",
|
||||||
|
"name": "0.36mm Draft @Elegoo Giga 0.6 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
|
||||||
|
"layer_height": "0.4",
|
||||||
|
"name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,30 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"inherits": "fdm_process_elegoo_08040",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "PEOSG08040",
|
||||||
|
"instantiation": "true",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||||
|
"initial_layer_acceleration": "1000",
|
||||||
|
"inner_wall_acceleration": "3000",
|
||||||
|
"make_overhang_printable_angle": "90",
|
||||||
|
"outer_wall_acceleration": "2000",
|
||||||
|
"resolution": "0.05",
|
||||||
|
"thick_internal_bridges": "0",
|
||||||
|
"top_shell_layers": "4",
|
||||||
|
"travel_acceleration": "3000",
|
||||||
|
"initial_layer_infill_speed": "60",
|
||||||
|
"initial_layer_speed": "45",
|
||||||
|
"travel_speed": "300",
|
||||||
|
"detect_thin_wall": "0",
|
||||||
|
"bridge_speed": "25",
|
||||||
|
"sparse_infill_speed": "150",
|
||||||
|
"internal_solid_infill_speed": "150",
|
||||||
|
"outer_wall_speed": "100",
|
||||||
|
"print_flow_ratio": "1.0",
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 0.8 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
||||||
|
"layer_height": "0.42",
|
||||||
|
"name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"layer_height": "0.48",
|
||||||
|
"name": "0.48mm Draft @Elegoo Giga 0.8 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,26 @@
|
|||||||
|
{
|
||||||
|
"inherits": "fdm_process_elegoo_10050",
|
||||||
|
"name": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"setting_id": "PEOSG10050",
|
||||||
|
"instantiation": "true",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||||
|
"initial_layer_acceleration": "1000",
|
||||||
|
"inner_wall_acceleration": "3000",
|
||||||
|
"make_overhang_printable_angle": "90",
|
||||||
|
"outer_wall_acceleration": "2000",
|
||||||
|
"resolution": "0.05",
|
||||||
|
"thick_internal_bridges": "0",
|
||||||
|
"top_shell_layers": "4",
|
||||||
|
"travel_acceleration": "3000",
|
||||||
|
"travel_speed": "300",
|
||||||
|
"detect_thin_wall": "0",
|
||||||
|
"bridge_speed": "20",
|
||||||
|
"outer_wall_speed": "80",
|
||||||
|
"sparse_infill_speed": "150",
|
||||||
|
"print_flow_ratio": "1.0",
|
||||||
|
"compatible_printers": [
|
||||||
|
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,4 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
|
||||||
|
"name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
{
|
||||||
|
"inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
|
||||||
|
"layer_height": "0.6",
|
||||||
|
"name": "0.60mm Draft @Elegoo Giga 1.0 nozzle"
|
||||||
|
}
|
||||||
@ -0,0 +1,18 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "fdm_process_elegoo_04020",
|
||||||
|
"inherits": "fdm_process_elegoo_common",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "false",
|
||||||
|
"elefant_foot_compensation": "0.1",
|
||||||
|
"top_shell_thickness": "1.0",
|
||||||
|
"bridge_flow": "1",
|
||||||
|
"initial_layer_speed": "50",
|
||||||
|
"initial_layer_infill_speed": "105",
|
||||||
|
"outer_wall_speed": "160",
|
||||||
|
"inner_wall_speed": "200",
|
||||||
|
"sparse_infill_speed": "200",
|
||||||
|
"internal_solid_infill_speed": "250",
|
||||||
|
"gap_infill_speed": "250",
|
||||||
|
"top_shell_layers": "5"
|
||||||
|
}
|
||||||
@ -0,0 +1,26 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "fdm_process_elegoo_06030",
|
||||||
|
"inherits": "fdm_process_elegoo_common",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "false",
|
||||||
|
"layer_height": "0.3",
|
||||||
|
"initial_layer_print_height": "0.3",
|
||||||
|
"elefant_foot_compensation": "0.15",
|
||||||
|
"bridge_flow": "1",
|
||||||
|
"line_width": "0.62",
|
||||||
|
"outer_wall_line_width": "0.62",
|
||||||
|
"initial_layer_line_width": "0.80",
|
||||||
|
"sparse_infill_line_width": "0.62",
|
||||||
|
"inner_wall_line_width": "0.62",
|
||||||
|
"internal_solid_infill_line_width": "0.62",
|
||||||
|
"support_line_width": "0.62",
|
||||||
|
"top_surface_line_width": "0.62",
|
||||||
|
"initial_layer_speed": "35",
|
||||||
|
"initial_layer_infill_speed": "55",
|
||||||
|
"gap_infill_speed": "80",
|
||||||
|
"sparse_infill_speed": "200",
|
||||||
|
"top_surface_speed": "150",
|
||||||
|
"bridge_speed": "30",
|
||||||
|
"overhang_3_4_speed": "25"
|
||||||
|
}
|
||||||
@ -0,0 +1,27 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "fdm_process_elegoo_08040",
|
||||||
|
"inherits": "fdm_process_elegoo_common",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "false",
|
||||||
|
"layer_height": "0.4",
|
||||||
|
"initial_layer_print_height": "0.4",
|
||||||
|
"elefant_foot_compensation": "0.15",
|
||||||
|
"bridge_flow": "1",
|
||||||
|
"line_width": "0.82",
|
||||||
|
"outer_wall_line_width": "0.82",
|
||||||
|
"initial_layer_line_width": "0.82",
|
||||||
|
"sparse_infill_line_width": "0.82",
|
||||||
|
"inner_wall_line_width": "0.82",
|
||||||
|
"internal_solid_infill_line_width": "0.82",
|
||||||
|
"support_line_width": "0.82",
|
||||||
|
"top_surface_line_width": "0.82",
|
||||||
|
"initial_layer_speed": "35",
|
||||||
|
"initial_layer_infill_speed": "55",
|
||||||
|
"sparse_infill_speed": "100",
|
||||||
|
"top_surface_speed": "150",
|
||||||
|
"bridge_speed": "30",
|
||||||
|
"overhang_2_4_speed": "40",
|
||||||
|
"overhang_3_4_speed": "20",
|
||||||
|
"overhang_4_4_speed": "10"
|
||||||
|
}
|
||||||
@ -0,0 +1,28 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"name": "fdm_process_elegoo_10050",
|
||||||
|
"inherits": "fdm_process_elegoo_common",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "false",
|
||||||
|
"layer_height": "0.5",
|
||||||
|
"initial_layer_print_height": "0.4",
|
||||||
|
"elefant_foot_compensation": "0.2",
|
||||||
|
"bridge_flow": "1",
|
||||||
|
"line_width": "1.00",
|
||||||
|
"outer_wall_line_width": "1.00",
|
||||||
|
"initial_layer_line_width": "1.00",
|
||||||
|
"sparse_infill_line_width": "1.00",
|
||||||
|
"inner_wall_line_width": "1.00",
|
||||||
|
"internal_solid_infill_line_width": "1.00",
|
||||||
|
"support_line_width": "1.00",
|
||||||
|
"top_surface_line_width": "1.00",
|
||||||
|
"initial_layer_speed": "35",
|
||||||
|
"initial_layer_infill_speed": "55",
|
||||||
|
"outer_wall_speed": "80",
|
||||||
|
"sparse_infill_speed": "100",
|
||||||
|
"top_surface_speed": "150",
|
||||||
|
"bridge_speed": "20",
|
||||||
|
"overhang_2_4_speed": "35",
|
||||||
|
"overhang_3_4_speed": "15",
|
||||||
|
"overhang_4_4_speed": "8"
|
||||||
|
}
|
||||||
Loading…
x
Reference in New Issue
Block a user