diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json
index 96ff81a4c0..690eaded8f 100644
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -367,6 +367,14 @@
         {
             "name": "Overture PLA @base",
             "sub_path": "filament/Overture/Overture PLA @base.json"
+        },
+		{
+            "name": "Overture TPU @base",
+            "sub_path": "filament/Overture/Overture TPU @base.json"
+        },
+		{
+            "name": "Overture ABS Basic @base",
+            "sub_path": "filament/Overture/Overture ABS Basic @base.json"
         },
         {
             "name": "PolyLite PLA @base",
@@ -683,6 +691,14 @@
         {
             "name": "Overture PLA @System",
             "sub_path": "filament/Overture/Overture PLA @System.json"
+        },
+		{
+            "name": "Overture TPU @System",
+            "sub_path": "filament/Overture/Overture TPU @System.json"
+        },
+		{
+            "name": "Overture ABS Basic @System",
+            "sub_path": "filament/Overture/Overture ABS Basic @System.json"
         },
         {
             "name": "PolyLite Dual PLA @System",
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture ABS Basic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture ABS Basic @System.json
new file mode 100644
index 0000000000..c8b5543e0e
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture ABS Basic @System.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Overture ABS Basic @System",
+    "inherits": "Overture ABS Basic @base",
+    "from": "system",
+    "setting_id": "OVABS08",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_long_retractions_when_cut": ["nil"],
+    "filament_retraction_distances_when_cut": ["nil"],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture ABS Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture ABS Basic @base.json
new file mode 100644
index 0000000000..479894a51f
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture ABS Basic @base.json	
@@ -0,0 +1,195 @@
+{
+	"type": "filament",
+    "name": "Overture ABS Basic @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "OVTABS08",
+    "instantiation": "false",
+	"description": "Overture ABS settings from https://overture3d.com/.",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "compatible_printers": [
+        ""
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "default_filament_colour": [
+        ""
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "enable_overhang_bridge_fan": [
+        "1"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
+    ],
+    "fan_cooling_layer_time": [
+        "38"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.15"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \nM106 P3 S0\n"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_notes": "",
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        "OVERTURE ABS Basic"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "OVERTURE"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "is_custom_defined": "0",
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "265"
+    ],
+    "nozzle_temperature_range_low": [
+        "245"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "103"
+    ],
+    "textured_plate_temp": [
+        "90"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "90"
+    ],
+    "version": "1.9.0.14"
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture TPU @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture TPU @System.json
new file mode 100644
index 0000000000..4f004c6c12
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture TPU @System.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Overture TPU @System",
+    "inherits": "Overture TPU @base",
+    "from": "system",
+    "setting_id": "OFOVT08",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "4"
+    ],
+    "filament_long_retractions_when_cut": ["0"],
+    "filament_retraction_distances_when_cut": ["0"],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture TPU @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture TPU @base.json
new file mode 100644
index 0000000000..9485dd5fe9
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture TPU @base.json	
@@ -0,0 +1,184 @@
+{
+    "type": "filament",
+    "name": "Overture TPU @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "OGFOVT08",
+    "instantiation": "false",
+	"description": "Overture TPU settings from https://overture3d.com/.",
+	"activate_air_filtration": [
+        "0"
+    ],
+    "additional_cooling_fan_speed": [
+        "100"
+    ],
+    "chamber_temperatures": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
+    "default_filament_colour": [
+        ""
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "enable_overhang_bridge_fan": [
+        "1"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "120"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.18"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \nM106 P3 S0\n"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_notes": "",
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_vendor": [
+        "OVERTURE"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "35"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "35"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "120"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "0"
+    ],
+    "textured_plate_temp": [
+        "35"
+    ],
+    "textured_plate_temp_initial_layer": [
+		"35"
+	]
+}
\ No newline at end of file