diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
index f2ccd3c796..e00049c085 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
@@ -83,7 +83,7 @@
 		"0.4"
 	],
 	"max_layer_height": [
-		"0.36"
+		"0.32"
 	],
 	"min_layer_height": [
 		"0.08"
@@ -107,7 +107,7 @@
 		"40"
 	],
 	"z_hop": [
-		"0.1"
+		"0.2"
 	],
 	"single_extruder_multi_material": "1",
 	"manual_filament_change": "1",
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
index cfa9a5a72d..81210d5a72 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json	
@@ -83,7 +83,7 @@
 		"0.4"
 	],
 	"max_layer_height": [
-		"0.36"
+		"0.32"
 	],
 	"min_layer_height": [
 		"0.08"
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
index a00e9b7d8c..b67f41ee2a 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
@@ -34,7 +34,7 @@
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "2000",
+	"outer_wall_acceleration": "2500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -74,12 +74,13 @@
 	"support_line_width": "0.38",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
-	"support_interface_top_layers": "3",
+	"support_interface_top_layers": "4",
 	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
+	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
 	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "0.2",
+	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
 	"support_threshold_angle": "45",
 	"support_object_xy_distance": "60%",
@@ -92,10 +93,10 @@
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "105",
-	"outer_wall_speed": "200",
+	"outer_wall_speed": "250",
 	"inner_wall_speed": "300",
 	"internal_solid_infill_speed": "300",
-	"top_surface_speed": "200",
+	"top_surface_speed": "250",
 	"gap_infill_speed": "100",
 	"sparse_infill_speed": "300",
 	"travel_speed": "300",
@@ -104,13 +105,13 @@
 	"prime_tower_width": "60",
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
-	"default_jerk": "30",
-	"outer_wall_jerk": "30",
-	"inner_wall_jerk": "30",
-	"infill_jerk": "30",
-	"top_surface_jerk": "15",
-	"initial_layer_jerk": "15",
-	"travel_jerk": "30",
+	"default_jerk": "7",
+	"outer_wall_jerk": "8",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "8",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "8",
 	"compatible_printers": [
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json
index 95746c0bd7..91842734a1 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json	
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -74,8 +74,8 @@
 	"support_line_width": "0.38",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
-	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
index 0668dc00c9..77463015b9 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
@@ -34,7 +34,7 @@
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "2000",
+	"outer_wall_acceleration": "2500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -74,12 +74,13 @@
 	"support_line_width": "0.38",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
-	"support_interface_top_layers": "4",
+	"support_interface_top_layers": "3",
 	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
+	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
 	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "0.2",
+	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
 	"support_threshold_angle": "45",
 	"support_object_xy_distance": "60%",
@@ -92,10 +93,10 @@
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "105",
-	"outer_wall_speed": "200",
+	"outer_wall_speed": "250",
 	"inner_wall_speed": "300",
 	"internal_solid_infill_speed": "300",
-	"top_surface_speed": "200",
+	"top_surface_speed": "250",
 	"gap_infill_speed": "100",
 	"sparse_infill_speed": "300",
 	"travel_speed": "300",
@@ -104,13 +105,13 @@
 	"prime_tower_width": "60",
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
-	"default_jerk": "30",
-	"outer_wall_jerk": "30",
-	"inner_wall_jerk": "30",
-	"infill_jerk": "30",
-	"top_surface_jerk": "15",
-	"initial_layer_jerk": "15",
-	"travel_jerk": "30",
+	"default_jerk": "7",
+	"outer_wall_jerk": "8",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "8",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "8",
 	"compatible_printers": [
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json
index 925693ba2c..824a468f8d 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json	
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -74,8 +74,8 @@
 	"support_line_width": "0.38",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
-	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
index 3ebb10711b..e1dd35fd3d 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
@@ -34,7 +34,7 @@
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "2000",
+	"outer_wall_acceleration": "2500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -74,12 +74,13 @@
 	"support_line_width": "0.38",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
-	"support_interface_top_layers": "3",
+	"support_interface_top_layers": "2",
 	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
+	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
 	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "0.2",
+	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
 	"support_threshold_angle": "45",
 	"support_object_xy_distance": "60%",
@@ -92,10 +93,10 @@
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "105",
-	"outer_wall_speed": "200",
+	"outer_wall_speed": "250",
 	"inner_wall_speed": "300",
 	"internal_solid_infill_speed": "300",
-	"top_surface_speed": "200",
+	"top_surface_speed": "250",
 	"gap_infill_speed": "100",
 	"sparse_infill_speed": "300",
 	"travel_speed": "300",
@@ -104,13 +105,13 @@
 	"prime_tower_width": "60",
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
-	"default_jerk": "30",
-	"outer_wall_jerk": "30",
-	"inner_wall_jerk": "30",
-	"infill_jerk": "30",
-	"top_surface_jerk": "15",
-	"initial_layer_jerk": "15",
-	"travel_jerk": "30",
+	"default_jerk": "7",
+	"outer_wall_jerk": "8",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "8",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "8",
 	"compatible_printers": [
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json
index acb5f272fc..5eb897dc41 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json	
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -75,7 +75,7 @@
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
+	"support_interface_bottom_layers": "-1",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
index 93b1118672..01ab4fa9ca 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
@@ -34,7 +34,7 @@
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "2000",
+	"outer_wall_acceleration": "2500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -74,12 +74,13 @@
 	"support_line_width": "0.38",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
-	"support_interface_top_layers": "3",
+	"support_interface_top_layers": "2",
 	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
+	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
 	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "0.2",
+	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
 	"support_threshold_angle": "45",
 	"support_object_xy_distance": "60%",
@@ -92,10 +93,10 @@
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "105",
-	"outer_wall_speed": "200",
+	"outer_wall_speed": "250",
 	"inner_wall_speed": "300",
 	"internal_solid_infill_speed": "300",
-	"top_surface_speed": "200",
+	"top_surface_speed": "250",
 	"gap_infill_speed": "100",
 	"sparse_infill_speed": "300",
 	"travel_speed": "300",
@@ -104,13 +105,13 @@
 	"prime_tower_width": "60",
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
-	"default_jerk": "30",
-	"outer_wall_jerk": "30",
-	"inner_wall_jerk": "30",
-	"infill_jerk": "30",
-	"top_surface_jerk": "15",
-	"initial_layer_jerk": "15",
-	"travel_jerk": "30",
+	"default_jerk": "7",
+	"outer_wall_jerk": "8",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "8",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "8",
 	"compatible_printers": [
 		"Creality Ender-3 V3 KE 0.4 nozzle"
 	]
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json
index 3c51628d7d..c2a0066d42 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json	
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.42",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -75,7 +75,7 @@
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
+	"support_interface_bottom_layers": "-1",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",