From f13dc1fdcd5345744f79f2415d5bf9439023413c Mon Sep 17 00:00:00 2001 From: SoftFever Date: Wed, 22 May 2024 22:54:56 +0800 Subject: [PATCH] bump profiles version to 2.1, change most profiles' top_surface_pattern to monotonicline as default pattern --- resources/profiles/Anker.json | 2 +- .../profiles/Anker/process/fdm_process_anker_fast_common.json | 2 +- resources/profiles/Anycubic.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic Chiron.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic Vyper.json | 2 +- .../Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic Chiron.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic Kobra2.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic KobraMax.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic Vyper.json | 2 +- .../Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json | 2 +- .../Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json | 2 +- .../Anycubic/process/0.30mm Draft @Anycubic Chiron.json | 2 +- .../Anycubic/process/0.30mm Draft @Anycubic Kobra2.json | 2 +- .../Anycubic/process/0.30mm Draft @Anycubic KobraMax.json | 2 +- .../Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json | 2 +- .../profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json | 2 +- .../Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json | 2 +- resources/profiles/Anycubic/process/fdm_process_common.json | 2 +- resources/profiles/Artillery.json | 2 +- .../Artillery/process/0.15mm Optimal @Artillery Genius Pro.json | 2 +- .../Artillery/process/0.15mm Optimal @Artillery Genius.json | 2 +- .../Artillery/process/0.16mm Optimal @Artillery Hornet.json | 2 +- .../Artillery/process/0.16mm Optimal @Artillery X1.json | 2 +- .../process/0.20mm Standard @Artillery Genius Pro.json | 2 +- .../Artillery/process/0.20mm Standard @Artillery Genius.json | 2 +- .../Artillery/process/0.20mm Standard @Artillery Hornet.json | 2 +- .../Artillery/process/0.20mm Standard @Artillery X1.json | 2 +- .../Artillery/process/0.20mm Standard @Artillery X2.json | 2 +- .../Artillery/process/0.24mm Draft @Artillery Hornet.json | 2 +- .../profiles/Artillery/process/0.24mm Draft @Artillery X1.json | 2 +- .../Artillery/process/0.25mm Draft @Artillery Genius Pro.json | 2 +- .../Artillery/process/0.25mm Draft @Artillery Genius.json | 2 +- resources/profiles/Artillery/process/fdm_process_common.json | 2 +- resources/profiles/BBL.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json | 2 +- resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json | 2 +- .../profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json | 2 +- .../profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json | 2 +- .../profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json | 2 +- .../profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json | 2 +- resources/profiles/BIQU.json | 2 +- resources/profiles/BIQU/process/fdm_process_biqu_common.json | 2 +- resources/profiles/BIQU/process/fdm_process_hurakan_common.json | 2 +- resources/profiles/CONSTRUCT3D.json | 2 +- resources/profiles/CONSTRUCT3D/process/fdm_process_common.json | 2 +- resources/profiles/Comgrow.json | 2 +- .../Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json | 2 +- .../Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json | 2 +- .../profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json | 2 +- .../Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json | 2 +- .../Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json | 2 +- .../Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json | 2 +- .../profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json | 2 +- .../Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json | 2 +- .../Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json | 2 +- .../Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json | 2 +- .../Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json | 2 +- .../Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json | 2 +- .../Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json | 2 +- .../Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json | 2 +- .../Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json | 2 +- .../Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json | 2 +- .../profiles/Comgrow/process/fdm_process_comgrow_common.json | 2 +- resources/profiles/Creality.json | 2 +- .../Creality/process/0.12mm Fine @Creality CR10Max.json | 2 +- .../Creality/process/0.12mm Fine @Creality CR10SE 0.2.json | 2 +- .../Creality/process/0.12mm Fine @Creality CR10SE 0.4.json | 2 +- .../Creality/process/0.12mm Fine @Creality CR10SE 0.6.json | 2 +- .../Creality/process/0.12mm Fine @Creality CR10SE 0.8.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 0.2.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 0.4.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 0.6.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 0.8.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V2.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V2Neo.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V3KE.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json | 2 +- .../Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json | 2 +- .../process/0.12mm Fine @Creality Ender5Pro (2019).json | 2 +- .../Creality/process/0.15mm Optimal @Creality CR10Max.json | 2 +- .../Creality/process/0.15mm Optimal @Creality Ender3V2.json | 2 +- .../process/0.15mm Optimal @Creality Ender5Pro (2019).json | 2 +- .../Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json | 2 +- .../Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json | 2 +- .../Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json | 2 +- .../Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json | 2 +- .../Creality/process/0.16mm Optimal @Creality CR10V2.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3 0.2.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3 0.4.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3 0.6.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3 0.8.json | 2 +- .../process/0.16mm Optimal @Creality Ender3 Pro 0.2.json | 2 +- .../process/0.16mm Optimal @Creality Ender3 Pro 0.4.json | 2 +- .../process/0.16mm Optimal @Creality Ender3 Pro 0.6.json | 2 +- .../process/0.16mm Optimal @Creality Ender3 Pro 0.8.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3S1.json | 2 +- .../process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json | 2 +- .../process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json | 2 +- .../process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json | 2 +- .../process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender3V3KE.json | 2 +- .../process/0.16mm Optimal @Creality Ender3V3SE 0.2.json | 2 +- .../process/0.16mm Optimal @Creality Ender3V3SE 0.4.json | 2 +- .../process/0.16mm Optimal @Creality Ender3V3SE 0.6.json | 2 +- .../process/0.16mm Optimal @Creality Ender3V3SE 0.8.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender5.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender5Plus.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender5S.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender5S1.json | 2 +- .../Creality/process/0.16mm Optimal @Creality Ender6.json | 2 +- .../Creality/process/0.20mm Standard @Creality CR10Max.json | 2 +- .../Creality/process/0.20mm Standard @Creality CR10SE 0.2.json | 2 +- .../Creality/process/0.20mm Standard @Creality CR10SE 0.4.json | 2 +- .../Creality/process/0.20mm Standard @Creality CR10SE 0.6.json | 2 +- .../Creality/process/0.20mm Standard @Creality CR10SE 0.8.json | 2 +- .../Creality/process/0.20mm Standard @Creality CR10V2.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3 0.2.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3 0.4.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3 0.6.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3 0.8.json | 2 +- .../process/0.20mm Standard @Creality Ender3 Pro 0.2.json | 2 +- .../process/0.20mm Standard @Creality Ender3 Pro 0.4.json | 2 +- .../process/0.20mm Standard @Creality Ender3 Pro 0.6.json | 2 +- .../process/0.20mm Standard @Creality Ender3 Pro 0.8.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3S1.json | 2 +- .../process/0.20mm Standard @Creality Ender3S1Plus 0.2.json | 2 +- .../process/0.20mm Standard @Creality Ender3S1Plus 0.4.json | 2 +- .../process/0.20mm Standard @Creality Ender3S1Plus 0.6.json | 2 +- .../process/0.20mm Standard @Creality Ender3S1Plus 0.8.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3S1Pro.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3V2.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3V2Neo.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender3V3KE.json | 2 +- .../process/0.20mm Standard @Creality Ender3V3SE 0.2.json | 2 +- .../process/0.20mm Standard @Creality Ender3V3SE 0.4.json | 2 +- .../process/0.20mm Standard @Creality Ender3V3SE 0.6.json | 2 +- .../process/0.20mm Standard @Creality Ender3V3SE 0.8.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender5.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender5Plus.json | 2 +- .../process/0.20mm Standard @Creality Ender5Pro (2019).json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender5S.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender5S1.json | 2 +- .../Creality/process/0.20mm Standard @Creality Ender6.json | 2 +- .../Creality/process/0.24mm Draft @Creality CR10Max.json | 2 +- .../Creality/process/0.24mm Draft @Creality CR10SE 0.2.json | 2 +- .../Creality/process/0.24mm Draft @Creality CR10SE 0.4.json | 2 +- .../Creality/process/0.24mm Draft @Creality CR10SE 0.6.json | 2 +- .../Creality/process/0.24mm Draft @Creality CR10SE 0.8.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 0.2.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 0.4.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 0.6.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 0.8.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json | 2 +- .../process/0.24mm Draft @Creality Ender3S1Plus 0.2.json | 2 +- .../process/0.24mm Draft @Creality Ender3S1Plus 0.4.json | 2 +- .../process/0.24mm Draft @Creality Ender3S1Plus 0.6.json | 2 +- .../process/0.24mm Draft @Creality Ender3S1Plus 0.8.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V2.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V2Neo.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V3KE.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json | 2 +- .../Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json | 2 +- .../process/0.24mm Draft @Creality Ender5Pro (2019).json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 0.2.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 0.4.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 0.6.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 0.8.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json | 2 +- .../process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json | 2 +- .../profiles/Creality/process/fdm_process_creality_common.json | 2 +- resources/profiles/Custom.json | 2 +- .../profiles/Custom/process/fdm_process_klipper_common.json | 2 +- .../profiles/Custom/process/fdm_process_marlin_common.json | 2 +- resources/profiles/Custom/process/fdm_process_rrf_common.json | 2 +- .../profiles/Dremel/process/fdm_process_dremel_common.json | 2 +- resources/profiles/Elegoo.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle).json | 2 +- .../0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle).json | 2 +- .../Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json | 2 +- .../profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json | 2 +- .../profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json | 2 +- .../profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json | 2 +- .../profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json | 2 +- .../profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json | 2 +- .../Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json | 2 +- .../Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json | 2 +- .../Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4 (0.2 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4 (0.4 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4 (0.6 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4 (0.8 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle).json | 2 +- .../process/0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle).json | 2 +- .../profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json | 2 +- .../profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json | 2 +- .../process/0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle).json | 2 +- .../process/0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle).json | 2 +- .../process/0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle).json | 2 +- .../process/0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle).json | 2 +- .../0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle).json | 2 +- .../Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune2.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune3.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json | 2 +- .../process/0.20mm Standard @Elegoo Neptune4 (0.2 nozzle).json | 2 +- .../process/0.20mm Standard @Elegoo Neptune4 (0.4 nozzle).json | 2 +- .../process/0.20mm Standard @Elegoo Neptune4 (0.6 nozzle).json | 2 +- .../process/0.20mm Standard @Elegoo Neptune4 (0.8 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle).json | 2 +- .../0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle).json | 2 +- .../Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json | 2 +- .../profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json | 2 +- .../profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json | 2 +- .../profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json | 2 +- .../profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json | 2 +- .../profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json | 2 +- .../Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json | 2 +- .../Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json | 2 +- .../Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4 (0.2 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4 (0.4 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4 (0.6 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4 (0.8 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle).json | 2 +- .../process/0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle).json | 2 +- .../profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle).json | 2 +- .../0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json | 2 +- .../Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json | 2 +- .../profiles/Elegoo/process/fdm_process_elegoo_common.json | 2 +- .../profiles/Elegoo/process/fdm_process_neptune4_common.json | 2 +- resources/profiles/FLSun.json | 2 +- resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json | 2 +- resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json | 2 +- resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json | 2 +- .../profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json | 2 +- resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json | 2 +- .../profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json | 2 +- resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json | 2 +- .../profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json | 2 +- .../profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json | 2 +- .../FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json | 2 +- resources/profiles/FLSun/process/fdm_process_common.json | 2 +- resources/profiles/Flashforge.json | 2 +- resources/profiles/FlyingBear.json | 2 +- resources/profiles/Folgertech.json | 2 +- .../Folgertech/process/fdm_process_folgertech_common.json | 2 +- resources/profiles/InfiMech.json | 2 +- resources/profiles/Kingroon.json | 2 +- resources/profiles/Kingroon/process/fdm_process_common.json | 2 +- .../profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json | 2 +- .../profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json | 2 +- .../profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json | 2 +- .../profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json | 2 +- resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json | 2 +- .../MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json | 2 +- .../profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json | 2 +- .../MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json | 2 +- .../MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json | 2 +- .../MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json | 2 +- .../MagicMaker/process/0.20mm Standard @MM BoneKing.json | 2 +- .../profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json | 2 +- .../profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json | 2 +- .../profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json | 2 +- .../profiles/MagicMaker/process/0.20mm Standard @MM slb.json | 2 +- .../MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json | 2 +- .../MagicMaker/process/0.20mm Standard Fast @MM hj SK.json | 2 +- .../MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json | 2 +- .../profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json | 2 +- .../profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json | 2 +- .../profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json | 2 +- .../profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json | 2 +- resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json | 2 +- .../MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json | 2 +- .../MagicMaker/process/0.30mm Draft Fast @MM hj SK.json | 2 +- .../MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json | 2 +- resources/profiles/OrcaArena.json | 2 +- .../OrcaArena/process/fdm_process_bbl_0.24_nozzle_0.8.json | 2 +- .../OrcaArena/process/fdm_process_bbl_0.32_nozzle_0.8.json | 2 +- .../OrcaArena/process/fdm_process_bbl_0.40_nozzle_0.8.json | 2 +- .../OrcaArena/process/fdm_process_bbl_0.48_nozzle_0.8.json | 2 +- .../OrcaArena/process/fdm_process_bbl_0.56_nozzle_0.8.json | 2 +- resources/profiles/Peopoly.json | 2 +- .../profiles/Peopoly/process/fdm_process_peopoly_common.json | 2 +- .../Peopoly/process/fdm_process_pply_0.40_nozzle_0.8.json | 2 +- resources/profiles/Prusa.json | 2 +- resources/profiles/Prusa/process/fdm_process_common.json | 2 +- resources/profiles/Qidi.json | 2 +- resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json | 2 +- resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json | 2 +- resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json | 2 +- resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json | 2 +- resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json | 2 +- .../profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json | 2 +- resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json | 2 +- resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json | 2 +- .../profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json | 2 +- resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json | 2 +- .../profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json | 2 +- resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json | 2 +- resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json | 2 +- .../profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json | 2 +- .../profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json | 2 +- .../profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json | 2 +- .../profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json | 2 +- .../profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json | 2 +- .../profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json | 2 +- .../profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json | 2 +- resources/profiles/Qidi/process/fdm_process_qidi_common.json | 2 +- resources/profiles/Raise3D.json | 2 +- .../profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json | 2 +- .../profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json | 2 +- .../profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json | 2 +- .../Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json | 2 +- .../profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json | 2 +- .../Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json | 2 +- resources/profiles/Ratrig.json | 2 +- .../profiles/Ratrig/process/fdm_process_ratrig_common.json | 2 +- resources/profiles/SecKit.json | 2 +- .../profiles/SecKit/process/fdm_process_seckit_common.json | 2 +- resources/profiles/Snapmaker/process/fdm_process_common.json | 2 +- resources/profiles/Sovol.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json | 2 +- .../profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV02.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV05.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV06.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV07.json | 2 +- .../profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json | 2 +- resources/profiles/Tronxy.json | 2 +- resources/profiles/Tronxy/process/fdm_process_common.json | 2 +- .../profiles/Tronxy/process/fdm_process_tronxy_common.json | 2 +- resources/profiles/TwoTrees.json | 2 +- resources/profiles/TwoTrees/process/0.08mm Extra Fine @SK1.json | 2 +- resources/profiles/TwoTrees/process/0.12mm Fine @SK1.json | 2 +- resources/profiles/TwoTrees/process/0.16mm Optimal @SK1.json | 2 +- resources/profiles/TwoTrees/process/0.20mm Quality @SK1.json | 2 +- resources/profiles/TwoTrees/process/0.20mm Standard @SK1.json | 2 +- resources/profiles/TwoTrees/process/0.24mm Draft @SK1.json | 2 +- resources/profiles/TwoTrees/process/0.24mm HSpeed @SK1.json | 2 +- .../profiles/TwoTrees/process/0.28mm Extra Draft @SK1.json | 2 +- resources/profiles/UltiMaker.json | 2 +- .../profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json | 2 +- .../UltiMaker/process/0.18mm Standard @UltiMaker 2.json | 2 +- .../profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json | 2 +- resources/profiles/Vivedino.json | 2 +- .../profiles/Vivedino/process/fdm_process_klipper_common.json | 2 +- resources/profiles/Voron.json | 2 +- resources/profiles/Voron/process/fdm_process_voron_common.json | 2 +- resources/profiles/Voxelab.json | 2 +- .../Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json | 2 +- .../Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json | 2 +- resources/profiles/Vzbot.json | 2 +- resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json | 2 +- .../Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json | 2 +- .../Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json | 2 +- resources/profiles/Wanhao.json | 2 +- .../profiles/Wanhao/process/fdm_process_wanhao_common.json | 2 +- 483 files changed, 483 insertions(+), 483 deletions(-) diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json index 74723c2173..5d2e9080a5 100644 --- a/resources/profiles/Anker.json +++ b/resources/profiles/Anker.json @@ -1,6 +1,6 @@ { "name": "Anker", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Anker configurations", "machine_model_list": [ diff --git a/resources/profiles/Anker/process/fdm_process_anker_fast_common.json b/resources/profiles/Anker/process/fdm_process_anker_fast_common.json index 82cc0d87fd..8eb9e65782 100644 --- a/resources/profiles/Anker/process/fdm_process_anker_fast_common.json +++ b/resources/profiles/Anker/process/fdm_process_anker_fast_common.json @@ -5,7 +5,7 @@ "instantiation": "false", "inherits": "fdm_process_anker_common", "reduce_crossing_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "bottom_shell_thickness": "0", "top_shell_thickness": "0", "default_acceleration": "6000", diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json index 6d8818a7e0..aa4b1b8965 100644 --- a/resources/profiles/Anycubic.json +++ b/resources/profiles/Anycubic.json @@ -1,6 +1,6 @@ { "name": "Anycubic", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Anycubic configurations", "machine_model_list": [ diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json index c7b30bc5f4..ae2e17bad9 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json index e516880a08..2f47366db3 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.35", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json index 9c75644713..eade07cdad 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "3", "top_shell_thickness": "0.6", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json index 73db772a2a..28f69756de 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json index f236f609e0..f2a73b0216 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json index ca65287273..7263d1b0ab 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json index ffa79dfcc0..fb909fa35e 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.35", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json index 3eec452725..1aff6200a3 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json index 99a1501abb..ec3a9fe452 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.35", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json index 7be6a36476..4615902fda 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "3", "top_shell_thickness": "0.6", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json index 097e6ae25c..48a56550b0 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json index 249aae8b65..cb6bc1e1dd 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json index f1c5e98f04..9d63fb5bfa 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json index 7e8f2256da..f5479ab1f6 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.35", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json index c6fd6c3b4f..63bae7a319 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json index 496528f2c0..789cca8906 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.35", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json index 59f44fea87..af95cfe7da 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "3", "top_shell_thickness": "0.6", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json index 605f81e5c3..00460d0e0b 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json index f42c73f1d9..c454c2bc9b 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json index f3fe2d9587..8f850856df 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "1.2", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json index 1f2f55dfcb..7f569fd758 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.35", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Anycubic/process/fdm_process_common.json b/resources/profiles/Anycubic/process/fdm_process_common.json index 30291bf626..3afdc03365 100644 --- a/resources/profiles/Anycubic/process/fdm_process_common.json +++ b/resources/profiles/Anycubic/process/fdm_process_common.json @@ -81,7 +81,7 @@ "tree_support_wall_count": "0", "tree_support_with_infill": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/Artillery.json b/resources/profiles/Artillery.json index 7cfbfa06f8..e1749947f1 100644 --- a/resources/profiles/Artillery.json +++ b/resources/profiles/Artillery.json @@ -1,6 +1,6 @@ { "name": "Artillery", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Artillery configurations", "machine_model_list": [ diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json index 5e1b7012dc..ab4089b9fd 100644 --- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json +++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json index 02f19906a6..5dae150088 100644 --- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json index 90b3717bc7..1b5877d31e 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json index 23b5e6605e..c7aa5ed4ec 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json index a068c3c314..f3c6595ca7 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json index 03d0e59ef3..b6e42dc551 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json index 24899e1bd9..b680aa141b 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json index ed6853df93..850efe6b1e 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json index 327afad6f7..9e4fda6b7d 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json index d3fb6cc4fd..610ee45999 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json index 06b10e836a..616ff0b2fa 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json index 97dfe75dc1..13e1dc5945 100644 --- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json +++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json index d5e0f991dd..c9a13e35c8 100644 --- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Artillery/process/fdm_process_common.json b/resources/profiles/Artillery/process/fdm_process_common.json index ec9d332fac..d40a097651 100644 --- a/resources/profiles/Artillery/process/fdm_process_common.json +++ b/resources/profiles/Artillery/process/fdm_process_common.json @@ -81,7 +81,7 @@ "tree_support_wall_count": "0", "tree_support_with_infill": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 2e2dc75a62..9ad3779363 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "01.09.00.10", + "version": "01.09.00.11", "force_update": "0", "description": "the initial version of BBL configurations", "machine_model_list": [ diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json index 4da8c72134..e13f52b66d 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json @@ -30,5 +30,5 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle" ], - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json index b3fa83d3de..b947c06289 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json @@ -37,7 +37,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n\t{elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", + "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json index 36bede9f0a..f29aeb7434 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle" ], - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json index 504d3123e3..10bafbdfa2 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle" ], - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json index ff1c26441a..8ebf4fea73 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json @@ -30,5 +30,5 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle" ], - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json index f76ee65d84..5cee189af5 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json @@ -36,7 +36,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n", + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n", "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json index 8284615176..e935d6664e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle" ], - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json index 29cfca14f2..49cbe6ecdb 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle" ], - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json index ad0f3cd438..782ec98d50 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json @@ -30,5 +30,5 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json index 9f2087a532..adf2a3bc7f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json @@ -37,7 +37,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json index 2a4e8d888b..732e99f8a0 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json index 9728fde873..c9f7e6908e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json index d752a45687..0a55296780 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json @@ -31,5 +31,5 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json index 4594156001..540fd0bb5b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json @@ -35,7 +35,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json index 73f67a2c9e..23526c9d03 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json @@ -33,5 +33,5 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json index e7865c1d5e..ea4e5e27a2 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json @@ -33,5 +33,5 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230824 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BIQU.json b/resources/profiles/BIQU.json index d97e1b2eee..0b34e7888f 100644 --- a/resources/profiles/BIQU.json +++ b/resources/profiles/BIQU.json @@ -1,6 +1,6 @@ { "name": "BIQU", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "BIQU configurations", "machine_model_list": [ diff --git a/resources/profiles/BIQU/process/fdm_process_biqu_common.json b/resources/profiles/BIQU/process/fdm_process_biqu_common.json index 0375a6ced1..1b296b8dcc 100644 --- a/resources/profiles/BIQU/process/fdm_process_biqu_common.json +++ b/resources/profiles/BIQU/process/fdm_process_biqu_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json index ac3fa6d8f5..5728d0a583 100644 --- a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json +++ b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/CONSTRUCT3D.json b/resources/profiles/CONSTRUCT3D.json index 9580e9cd06..204e5e75eb 100644 --- a/resources/profiles/CONSTRUCT3D.json +++ b/resources/profiles/CONSTRUCT3D.json @@ -1,6 +1,6 @@ { "name": "CONSTRUCT3D", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Construct3D configurations", "machine_model_list": [ diff --git a/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json b/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json index b5ccd4173d..98f24aad78 100644 --- a/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json +++ b/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json @@ -83,7 +83,7 @@ "tree_support_wall_count": "0", "tree_support_with_infill": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", diff --git a/resources/profiles/Comgrow.json b/resources/profiles/Comgrow.json index 6150492e6c..dd962a7e20 100644 --- a/resources/profiles/Comgrow.json +++ b/resources/profiles/Comgrow.json @@ -1,6 +1,6 @@ { "name": "Comgrow", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Comgrow configurations", "machine_model_list": [ diff --git a/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json index 75aad4846c..f65c16459b 100644 --- a/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json index 17d1839a79..db41ecc64e 100644 --- a/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json b/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json index 2b364ee2a8..3d5420355a 100644 --- a/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json +++ b/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json index 9d94e6c504..5cfa3a3188 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json index d11dfb24a1..dd3a8070f3 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json index 17de958703..e70b15981d 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "1.0", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json index 505373d1e9..14719cd6ef 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json index 7f8c3778b1..cbfcd4992c 100644 --- a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json index 3b9cbaa7a5..db859c397b 100644 --- a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json index a1ca8bf2cb..3791c14d3b 100644 --- a/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json index 9fbe8bb3f8..b80a6609b9 100644 --- a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json index af0be46947..2bd2493503 100644 --- a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json index 7fc0fb213c..729f151519 100644 --- a/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json index a7385a9177..2512181865 100644 --- a/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json index 8bddb7adca..13f8660ec3 100644 --- a/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json index 0b014b0791..0c04a9280f 100644 --- a/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json @@ -78,7 +78,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "2", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json index 41009107e5..0c75457ac1 100644 --- a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json +++ b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json @@ -179,7 +179,7 @@ "top_surface_acceleration": "2000", "top_surface_jerk": "9", "top_surface_line_width": "0.4", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "40", "travel_acceleration": "3000", "travel_jerk": "12", diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index a3e7f60d0b..a72b06b076 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -1,6 +1,6 @@ { "name": "Creality", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Creality configurations", "machine_model_list": [ diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json index 86937ca76f..c6e0e3c049 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json index 08f49d3512..7c514b556a 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json index 0763c0eef7..9e7593af59 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json index 7aa30a730a..f924e7d589 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json index 9fced98b54..4f4926aacd 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json index 2e4347739b..5b6d4c5676 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json index 68cb76aeef..ac9717eba1 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json index 9e03ec13dd..db047e4269 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json index 0ceadf8e36..efce8c2d03 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json index 7fdec59c18..7693975ddc 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json index 8db8cbe7bf..0e02c09dbb 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json index 53a9e37792..913636b953 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json index 29c2821863..9d347da551 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json index eac84c4088..9ca84807f4 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json index eb9a1a3523..fccae88f53 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json index 9521fc51e4..a357c83882 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json index 0fbd9d9218..6a7de541d1 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.22", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json index 229bccb94b..40a01902d3 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json index bd5a636f29..8a6d369f10 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.62", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json index d8b251a1fd..be014f9f0b 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.82", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json index 95e24872c8..2ae5db21bd 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json index eb649fb1f1..2d9cc2ea68 100644 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json index 997f6face1..cb71707f79 100644 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json index 9404f9d2f8..b3ff50fb2f 100644 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json index 644ddc4fed..840d148cd5 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json index 34f855f799..b5c5838283 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json index 6b2ec5c2fe..b80208b576 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.63", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json index 11285e327a..d2aa8c80ec 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json index 0ded3d9508..fec8117098 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json index 26de209709..8f002a72cc 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json index c57f64c041..a75e149b6e 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json index 8cce719d05..dad348b317 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json index 493e91839d..e4e4c901c7 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json index 15ea186a05..d9cc157fa1 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json index c673f050fd..485685ec4b 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json index 3d99e46056..0c1a0f749e 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json index 368893012f..edff62e441 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json index 2d7a02e45e..2665ea3fd3 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json index e38e4c4089..873eb182ec 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json index 45ca5389c6..7214188347 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json index 0bd95f7ac4..70163bc3dc 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json index bcd0c9d992..3b652dcf0a 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json index 6897175b64..f94eec09ab 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json index 6dc83dadbd..2538aa11be 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json index 5584669a73..46d65e7122 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json index 8e79d226d0..ef2bffcc02 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.22", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json index 369b0a1a4a..530d41624d 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json index 5c9cd487c7..91b36ae6f4 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.62", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json index c9fdcc4187..deb23c8a3b 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.82", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json index 5600ad9174..7f76fbd942 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json index 78c523f829..484d32d0df 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json index 86044fd774..27a0feb8d7 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json index 64fdc16a1f..4573868e81 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json index 6586f39240..af22c17768 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json index 9913f7f5b7..db483caf0b 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json index a52c72adb6..bd0601cf9d 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json index 2c7643b16c..88cc271d75 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json index e6c4204f03..36bd342bf8 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json index d6c78d4b32..b17d83b7ce 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json index a6cbe7ac1a..38553af9b2 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json index 01620cfa09..0a065d178f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json index 786de08cdb..ac7771ebb9 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json index 8d1ee9ba06..e0dcb2cc87 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json index ad84a4e627..139b3699c1 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json index 76fe4f2103..9ca6179416 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json index ca3ae01e2f..eb9b3bf7cc 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json index 96f81bb121..11bff339aa 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json index c5dc8ec7a2..5c29468ab7 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json index 94574083f0..12a38655a6 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json index a3d25a670c..4c2647a755 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json index fbb57bcb08..49d1e4b9ea 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json index 02f6f27b91..8b4e385b9d 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json index 57f9f6c6a1..7ad55384bc 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json index 2562ed334b..9ac4b820ac 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json index 4743cb6256..a12165953f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json index d6984b116e..ff40fda1f3 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json index ef601ed163..a3532c6a73 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json index d02539eb45..23f1e4b44a 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json index b685b84dba..2a996b4473 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.22", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json index 73b1636de4..3415709f38 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json index 1a82bd54c2..daa3e807d8 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.62", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json index 1c36e38e18..6bd2c594af 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.82", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json index b8ab9727f6..515b2cd6bb 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json index c9518d4655..88592919f7 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json index 04b6b36d34..2e186e482f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json index 63815b0e6e..1487772565 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json index 608e67142b..da250fc845 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json index ae98760d8a..7f6a59d33b 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json index 59fe41c01d..432562e3a1 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json index 536dc77546..12f174c33c 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json index b9f3144edd..14962e5087 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json index b0f98c9699..ea231e98c9 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json index 32fbed681b..6db6db80be 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json index 492b2675bb..2621599ba0 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json index ccf0dd7258..529528c050 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json index 020c8e13a7..73b949f04a 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json index 97df4f70ba..3573867d86 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json index 2b495cad25..5f822b2cfa 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json index 805dc42a38..c6d0c98fc9 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json index bd4c6e5f2b..a81b7d1ab4 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json index fdebf4946b..6cb0a25fc3 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json index fec5ce6f54..03c9d8730e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json index 3a523cd522..8b1545a11b 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json index 6961aa3c67..78d7e1378e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json index aa5bac7b5c..3c808556f6 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json index f9727bbf9c..af24ef669e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json index a461943f93..40feb298fc 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json index 6644c9ba84..084f441372 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json index 9c65d0b440..d5f01e73b2 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.22", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json index 83e2f9d4e8..33dacc26b0 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json index e5bb153a68..cf1126078b 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.62", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json index b023f761aa..5b1cf6e198 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json @@ -87,7 +87,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "2", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.82", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json index d6df736aba..3fbafc29a5 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json index 7d9f3fe5ff..3b8d34c2c2 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json index 2ba5989636..189dbdb064 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json index acf78ef95a..b1787e9fdf 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json index 502148a517..e32cc005ff 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json index 3d17eea026..1dc90a53a5 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json index 1484a5a12a..5f1b9abfbb 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json index 6b4185940b..9b17965523 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.6", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json index f884f5dc63..c803271945 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Creality/process/fdm_process_creality_common.json b/resources/profiles/Creality/process/fdm_process_creality_common.json index 83c8322a28..ce779b40e2 100644 --- a/resources/profiles/Creality/process/fdm_process_creality_common.json +++ b/resources/profiles/Creality/process/fdm_process_creality_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Custom.json b/resources/profiles/Custom.json index 118607cf52..ebd4f0c118 100644 --- a/resources/profiles/Custom.json +++ b/resources/profiles/Custom.json @@ -1,6 +1,6 @@ { "name": "Custom Printer", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "My configurations", "machine_model_list": [ diff --git a/resources/profiles/Custom/process/fdm_process_klipper_common.json b/resources/profiles/Custom/process/fdm_process_klipper_common.json index 4c2320391c..dae96dd844 100644 --- a/resources/profiles/Custom/process/fdm_process_klipper_common.json +++ b/resources/profiles/Custom/process/fdm_process_klipper_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Custom/process/fdm_process_marlin_common.json b/resources/profiles/Custom/process/fdm_process_marlin_common.json index ad5002ab20..d39d2becc1 100644 --- a/resources/profiles/Custom/process/fdm_process_marlin_common.json +++ b/resources/profiles/Custom/process/fdm_process_marlin_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Custom/process/fdm_process_rrf_common.json b/resources/profiles/Custom/process/fdm_process_rrf_common.json index 86061eb72a..abf616fd04 100644 --- a/resources/profiles/Custom/process/fdm_process_rrf_common.json +++ b/resources/profiles/Custom/process/fdm_process_rrf_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Dremel/process/fdm_process_dremel_common.json b/resources/profiles/Dremel/process/fdm_process_dremel_common.json index ee2cd3a42e..40222d6337 100644 --- a/resources/profiles/Dremel/process/fdm_process_dremel_common.json +++ b/resources/profiles/Dremel/process/fdm_process_dremel_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json index f361afaaed..734cc1262c 100644 --- a/resources/profiles/Elegoo.json +++ b/resources/profiles/Elegoo.json @@ -1,6 +1,6 @@ { "name": "Elegoo", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Elegoo configurations", "machine_model_list": [ diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json index 539343e9fe..b038c37443 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json index d1a3bb0599..6651d359db 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json index 63200f7671..d4442bebb2 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json index dfef27e158..ea7f169339 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json index 739cef8085..c38fc06729 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json index aaade1da53..f1e200d157 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json index 10550956df..65ab7e3a6f 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json index 4d1d16f32d..bd85516ca5 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle).json index 8c0d224646..9ecb45398c 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle).json index 10a5912c2c..098cd34659 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle).json index ef65fe8243..93301e83a8 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle).json index 4706ab2596..f31866bee6 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle).json index e06676560c..7e6dc95e2c 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle).json index cb38d8f590..24e2e69c3b 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle).json index 21174abd99..37b8ede2aa 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle).json index 98b1e7aa41..4172092c74 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle).json index 9f0a4e1fc3..eb1a047936 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle).json index 41fe9cbc3b..569a1bccde 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle).json index 0803d18037..ee6d45e915 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle).json index bcf08edbcc..87d8bf3b3e 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json index e92801bf1d..1e5418088c 100644 --- a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json index 6af8821327..fc5396ab40 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json index 8d281ef78e..b194e0a6c8 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json index 6edc7d035a..67a3bbda3e 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json index f43bfe5a10..14abacd546 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json index bf32664861..4794503cec 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json index 18d409bb33..a6c5865df3 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json index 1995dce6d1..e77f50295d 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json index bd61f8bc83..6cfa6ea4c4 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.2 nozzle).json index ef1414f069..687a1811a0 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.4 nozzle).json index 3f585caab2..ae186fc6dd 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.6 nozzle).json index a009da29eb..61e8bb626d 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.8 nozzle).json index aaf50deefd..e12bc1d4dd 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4 (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle).json index 41f12f0f02..42ab9780f1 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle).json index 401e4fc217..cfbc308a17 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle).json index 3da84ebf49..cd5c0df92c 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle).json index 4f5ffceb57..93af963348 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle).json index a3f24129ab..7230507c95 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle).json index 37c42c6663..e6267acb74 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle).json index 7addbe460f..4f4ac4fbd8 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle).json index e713c1dce6..38b05e66d5 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json index eac0b78091..adb55ad26e 100644 --- a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json index 3794fd2e8b..c577b314c8 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json index cf79ff16ac..9f14de0704 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json index 3ab4f03850..61090b1d91 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json index fb2a9fea72..9acf8c84ba 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json index 90e2e6e9e7..263890c3f1 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json index 1da848e6f1..29c21bfd0e 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json index cbfaca0474..948a95d5bd 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json index 4695d5fa0a..82c035dd6a 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle).json index 2741157aa3..9f57a9b25f 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle).json index 05b1c10d53..412536db2f 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle).json index 69b4cccac1..5da075cff6 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle).json index 4a8a6a10f6..b6f0ec9d79 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle).json index 79fb839db3..a86317ecb2 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle).json index 1587ad552b..8a5170e8a4 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle).json index 8f2d254baa..600339ba44 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle).json index 6f37cb8756..ce8e971115 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle).json index 510a17fda2..e123f95bf6 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle).json index 644e78490b..e8c2299202 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle).json index bc8d7ecb57..0cf857bc9b 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle).json index a94a77f35b..73c24246e1 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json index d13dfe8f32..c5a43079af 100644 --- a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json index c0ca9ac7e3..c8dcba56f6 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json index 37fde48d04..feb3d5f70e 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json index fe84b11aa6..e885c64f13 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json index af3f7ad675..690c244d6a 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json index 7af032bde2..74defae68c 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json index 419aab1794..34e1212b50 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json index c1aed883be..37a9a90d3c 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json index add697439b..8ddb13f45d 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.2 nozzle).json index 7dbac42615..6a50274cae 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.4 nozzle).json index 6f50f7149b..23d4113146 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.6 nozzle).json index 080770c151..ec9cbf92a9 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.8 nozzle).json index 5093910fda..7cb6d0cd98 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4 (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle).json index 3fe7c398a5..661aa88f63 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle).json index 89eb5ba878..a74e90b2c1 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle).json index 318b6a396b..73369e7456 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle).json index 68615fbc10..97dbc4cc08 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle).json index bbf6de592c..71a82a0fc4 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle).json index b949da8ea4..41834bde97 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle).json index 0f8653e791..e75da66406 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.56", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle).json index d05dfae48d..cdb7048d7e 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.78", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json index 6c959477f7..fd6788587c 100644 --- a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json index b3278427ac..7309292ef8 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json index 692951a97c..d7411cd3dd 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json index 92035a3fc7..382fd05c9d 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json index 53ea928c64..1b1e1c3205 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json index df072e3506..7c8c35c50d 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json index d465779d5c..0982941b52 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json index b3a1023b99..c8c097ae86 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json index b270e5b302..345a3e2e9e 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.2 nozzle).json index fd60e63a23..54ba31a3d7 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.4 nozzle).json index a71372ae75..5904d912bb 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.6 nozzle).json index e86310a6eb..e1601d15a4 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.8 nozzle).json index d058cd9026..3276e82691 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4 (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle).json index fefb7b6b81..ebf0bf32c5 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle).json index cd0d5ab883..45cc94b453 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle).json index 9061cff097..e6d3275fb2 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle).json index 4e35b2b9fc..f0d7ed8bca 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle).json index 0b2b3bc9c1..8ee549de06 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle).json index cb2080be4b..bc966a39b4 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle).json index a37af48be2..d8d40fbc0e 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle).json index ebda19568f..efcb13855c 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json index b9a14acade..e3eb2e8dee 100644 --- a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json index a5c5dd2c91..27b0c5bd55 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json index 2a67da73c7..852c9c475d 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json index 7e7a9062a6..ea331c3bb5 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json index 4342f9aec1..b572a44beb 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json index 9bb848aeea..32b156a08c 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json index d8d19449fe..cee9de657f 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json index ac002f95d3..f65b350d31 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json index 4c6529a260..264e4d1ae1 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle).json index 21a1a10741..80181addff 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle).json index 1ce0a7317e..f4efcacccb 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle).json index 987d8f78bb..e0ea48c46d 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle).json index 2ad24c0a03..63a661770c 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle).json index 29a57e8bb6..ba4bfcd3ed 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle).json index feb9ca7ad0..fc5cd75b39 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle).json index 93b683e79d..6b137a152e 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle).json index 590c53b55c..f6fc767aa2 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle).json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle).json index d1474f68b7..591374e647 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.25", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle).json index a727fd9831..b96b4c4e0d 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle).json index aec1d00c39..f9ce9dd4de 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle).json @@ -72,7 +72,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json index 585a66496c..b2271d8abf 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle).json @@ -74,7 +74,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.85", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json index 292d88f247..dbc97f7e87 100644 --- a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json b/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json index 79830b41b9..d2fba5e576 100644 --- a/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json +++ b/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json @@ -82,7 +82,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Elegoo/process/fdm_process_neptune4_common.json b/resources/profiles/Elegoo/process/fdm_process_neptune4_common.json index c3d1c3fecd..3b633006df 100644 --- a/resources/profiles/Elegoo/process/fdm_process_neptune4_common.json +++ b/resources/profiles/Elegoo/process/fdm_process_neptune4_common.json @@ -75,7 +75,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.2", "top_shell_layers": "11", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun.json b/resources/profiles/FLSun.json index 2c512a86ce..b177ba6962 100644 --- a/resources/profiles/FLSun.json +++ b/resources/profiles/FLSun.json @@ -1,6 +1,6 @@ { "name": "FLSun", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "FLSun configurations", "machine_model_list": [ diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json index b2f8c0a6ef..a867e5fd9b 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "12", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json index 21d435028c..fda7d144f9 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "12", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json index d9aac91088..4f1c63c248 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json index 093584d733..057e0bb19f 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "6", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json index b3e33c1928..0e2d1461a1 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json index f4b46ac571..4bb8e85c75 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json index ca8b4bf23c..0c1daaff5a 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json index f06ed8b702..5ba222dc3f 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json index f6a8572ee2..00bce5225f 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json index 5b0c670c41..e9da429ad0 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/FLSun/process/fdm_process_common.json b/resources/profiles/FLSun/process/fdm_process_common.json index dbcc552bbd..5eba546926 100644 --- a/resources/profiles/FLSun/process/fdm_process_common.json +++ b/resources/profiles/FLSun/process/fdm_process_common.json @@ -81,7 +81,7 @@ "tree_support_wall_count": "0", "tree_support_with_infill": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/Flashforge.json b/resources/profiles/Flashforge.json index b58dbefe0d..636d1fa396 100644 --- a/resources/profiles/Flashforge.json +++ b/resources/profiles/Flashforge.json @@ -1,7 +1,7 @@ { "name": "Flashforge", "url": "", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Flashforge configurations", "machine_model_list": [ diff --git a/resources/profiles/FlyingBear.json b/resources/profiles/FlyingBear.json index c03595bce2..9854e2cee0 100644 --- a/resources/profiles/FlyingBear.json +++ b/resources/profiles/FlyingBear.json @@ -1,6 +1,6 @@ { "name": "FlyingBear", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "1", "description": "FlyingBear configurations", "machine_model_list": [ diff --git a/resources/profiles/Folgertech.json b/resources/profiles/Folgertech.json index 3753a8892f..f38f081914 100644 --- a/resources/profiles/Folgertech.json +++ b/resources/profiles/Folgertech.json @@ -1,6 +1,6 @@ { "name": "Folgertech", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Folgertech configurations", "machine_model_list": [ diff --git a/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json b/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json index ead894d6f0..2d2149e724 100644 --- a/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json +++ b/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/InfiMech.json b/resources/profiles/InfiMech.json index 38c380e380..08a831bedf 100644 --- a/resources/profiles/InfiMech.json +++ b/resources/profiles/InfiMech.json @@ -1,6 +1,6 @@ { "name": "InfiMech", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "1", "description": "InfiMech configurations", "machine_model_list": [ diff --git a/resources/profiles/Kingroon.json b/resources/profiles/Kingroon.json index 292090de84..19304b1e50 100644 --- a/resources/profiles/Kingroon.json +++ b/resources/profiles/Kingroon.json @@ -1,7 +1,7 @@ { "name": "Kingroon", "url": "https://kingroon.com/", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Kingroon configuration files", "machine_model_list": [ diff --git a/resources/profiles/Kingroon/process/fdm_process_common.json b/resources/profiles/Kingroon/process/fdm_process_common.json index cfe9b4199d..0477c19f03 100644 --- a/resources/profiles/Kingroon/process/fdm_process_common.json +++ b/resources/profiles/Kingroon/process/fdm_process_common.json @@ -157,7 +157,7 @@ "top_surface_acceleration": "3000", "top_surface_jerk": "9", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "60", "travel_acceleration": "3000", "travel_jerk": "12", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json index 96031f4534..ef58fa21f7 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json index 9e65e3c0f1..823e1e59a4 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json index aac3d619ec..90485e8569 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json index 1cf2bb15bd..95828c323a 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json index 0d84145903..4ab240baac 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json index edcec6770e..4b6ca0d952 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json index 12fbabfa16..0b398ff6e2 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json index 95d35c5974..d261694e40 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json index a852f468cb..72ce20e9ea 100644 --- a/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json index 9993d37aa7..81716f27f9 100644 --- a/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json index 309d1d3ab4..8c18dcaacb 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "initial_layer_travel_speed": "60", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json index 89506213f6..17905e7921 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "initial_layer_travel_speed": "60", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json index c04bf60770..7fc44d68a0 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "initial_layer_travel_speed": "60", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json index 4f0224481f..7b292da39c 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "initial_layer_travel_speed": "60", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json index 3a2ce22e6e..73618b0dde 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json @@ -68,7 +68,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "initial_layer_travel_speed": "60", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json index c496a8b2b4..1e0e84b7ea 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json @@ -68,7 +68,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json index ed09680bbd..2f8681b695 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json @@ -68,7 +68,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json index 0c7e0bab23..6cc84ec800 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json @@ -68,7 +68,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json index bdce77e824..f4d1fcf9b2 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json index bf9b4bf478..175f3076b0 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json index 0929e9dd48..f358cdf02b 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json index 2dae174d7f..816bc041d5 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "travel_speed": "150", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json index 7314b4cfaa..d142dfd0d1 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json @@ -68,7 +68,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json index f1feb9d4d7..223b8b2345 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json index 4935a4a224..c3754a40ae 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json index 90aaa46fb9..ed40c3e8d0 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_thickness": "0.8", "enable_prime_tower": "0", diff --git a/resources/profiles/OrcaArena.json b/resources/profiles/OrcaArena.json index a5ee2329af..81fe110cbb 100644 --- a/resources/profiles/OrcaArena.json +++ b/resources/profiles/OrcaArena.json @@ -1,7 +1,7 @@ { "name": "Orca Arena Printer", "url": "", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Orca Arena configuration files", "machine_model_list": [ diff --git a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.24_nozzle_0.8.json b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.24_nozzle_0.8.json index 9c1cbf2028..55d9be4407 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.24_nozzle_0.8.json +++ b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.24_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.32_nozzle_0.8.json b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.32_nozzle_0.8.json index d64d4b6f24..6172f32e94 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.32_nozzle_0.8.json +++ b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.32_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.40_nozzle_0.8.json b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.40_nozzle_0.8.json index ce35f532e5..aa514e6f04 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.40_nozzle_0.8.json +++ b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.40_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.48_nozzle_0.8.json b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.48_nozzle_0.8.json index 87c7d6b04c..d026bdc746 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.48_nozzle_0.8.json +++ b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.48_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.56_nozzle_0.8.json b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.56_nozzle_0.8.json index 311925326a..f43ab7e2e5 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_bbl_0.56_nozzle_0.8.json +++ b/resources/profiles/OrcaArena/process/fdm_process_bbl_0.56_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/Peopoly.json b/resources/profiles/Peopoly.json index 894485f3fc..b776df7c93 100644 --- a/resources/profiles/Peopoly.json +++ b/resources/profiles/Peopoly.json @@ -1,6 +1,6 @@ { "name": "Peopoly", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Peopoly configurations", "machine_model_list": [ diff --git a/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json b/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json index 35138b2e2d..1f11ed867b 100644 --- a/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json +++ b/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Peopoly/process/fdm_process_pply_0.40_nozzle_0.8.json b/resources/profiles/Peopoly/process/fdm_process_pply_0.40_nozzle_0.8.json index b1dbf2c592..b06735853b 100644 --- a/resources/profiles/Peopoly/process/fdm_process_pply_0.40_nozzle_0.8.json +++ b/resources/profiles/Peopoly/process/fdm_process_pply_0.40_nozzle_0.8.json @@ -15,7 +15,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "45", "initial_layer_infill_speed": "80", "sparse_infill_speed": "150", diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 1a7cf4e465..bb0ca7890e 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -1,6 +1,6 @@ { "name": "Prusa", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Prusa configurations", "machine_model_list": [ diff --git a/resources/profiles/Prusa/process/fdm_process_common.json b/resources/profiles/Prusa/process/fdm_process_common.json index 8995061a1d..c903b622c4 100644 --- a/resources/profiles/Prusa/process/fdm_process_common.json +++ b/resources/profiles/Prusa/process/fdm_process_common.json @@ -84,7 +84,7 @@ "tree_support_wall_count": "0", "tree_support_with_infill": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index 9a6e3fa2d1..8b820d30ad 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -1,6 +1,6 @@ { "name": "Qidi", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Qidi configurations", "machine_model_list": [ diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json index 61346c894b..e2f3a6c4a3 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json @@ -69,7 +69,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json index e94ba2bf36..446bbe9496 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json index 27cc928993..f106b5991e 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json index 950638c6e8..0f2a3a17c1 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json index db7467a566..41b490ad9c 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json @@ -66,7 +66,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json index c3723494a1..2db184f4e3 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json index 73d3761633..1291095474 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json index 5883e726e0..8f4ccd2869 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json index 978fb331bd..dfe0359d24 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json index 274a05a25a..0b80f7bc7c 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json index 39d83b5b7d..5028ba5743 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json index abeef5e362..e278cf73d8 100644 --- a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json @@ -63,7 +63,7 @@ "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", "tree_support_wall_count": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json index e2aff726a8..876398b4ef 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json index 21ed5164fd..b9a009f8d7 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json index 6cdb09eb56..d4ee408d40 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json index 3ab5523afe..34cbaf33b7 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json index 3c9b3735cf..4ac52c1f90 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json index 52668072a4..2235d8945b 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json index f3d46079f7..d4c6431549 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json index 0e8fe22031..ea39b843e0 100644 --- a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json @@ -64,7 +64,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json index 2607ba42df..c7d9c64114 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json index 7a6af747a9..ebd6383f2b 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json index 063964384a..bfafd86424 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json index 6b5c01270e..3bd33b5ca9 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json index 0f3c7fbf6b..1004626dab 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json index 19fec3bcff..3f76f2e2cb 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json index a9c78c9216..53a00b97ff 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json @@ -70,7 +70,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.45", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json index bb88ef21c1..b650d2a639 100644 --- a/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json index c34e9f9421..6a017a5573 100644 --- a/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json index c7cc1dfa35..603ad93eff 100644 --- a/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json index 2bf013928a..3d596138b7 100644 --- a/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json index 02013be08c..d8f039f189 100644 --- a/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json @@ -18,7 +18,7 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", "outer_wall_speed": "120", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_common.json index e1fa78fd3d..d776fe2bd1 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_common.json @@ -82,7 +82,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D.json b/resources/profiles/Raise3D.json index 7a57d09d3c..ad5a2be34b 100644 --- a/resources/profiles/Raise3D.json +++ b/resources/profiles/Raise3D.json @@ -1,7 +1,7 @@ { "name": "Raise3D", "url": "", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Raise3D configurations", "machine_model_list": [ diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json index 0818f0dd88..545db35bec 100644 --- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json index 6150d744c3..a3f88c3853 100644 --- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json index 93873d18a4..0781fd1dca 100644 --- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json index 9e06abcac5..f1b623c744 100644 --- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json index 8fa0f3696e..e85f075e4c 100644 --- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json index 1c5076efc5..9a45951619 100644 --- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json index 7253b6bfbd..8768544f5d 100644 --- a/resources/profiles/Ratrig.json +++ b/resources/profiles/Ratrig.json @@ -1,6 +1,6 @@ { "name": "RatRig", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "RatRig configurations", "machine_model_list": [ diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json index 10f49e4516..410426c2d3 100644 --- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/SecKit.json b/resources/profiles/SecKit.json index e7cba2af8a..1b4f846c01 100644 --- a/resources/profiles/SecKit.json +++ b/resources/profiles/SecKit.json @@ -1,6 +1,6 @@ { "name": "SecKit", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "SecKit configurations", "machine_model_list": [ diff --git a/resources/profiles/SecKit/process/fdm_process_seckit_common.json b/resources/profiles/SecKit/process/fdm_process_seckit_common.json index 1ad7b2d9a7..89c5662446 100644 --- a/resources/profiles/SecKit/process/fdm_process_seckit_common.json +++ b/resources/profiles/SecKit/process/fdm_process_seckit_common.json @@ -82,7 +82,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Snapmaker/process/fdm_process_common.json b/resources/profiles/Snapmaker/process/fdm_process_common.json index f35f39ffb1..7836aecab2 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_common.json @@ -56,7 +56,7 @@ "print_flow_ratio": "1", "wall_loops": "3", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_shell_layers": "4", "top_shell_thickness": "0.8", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Sovol.json b/resources/profiles/Sovol.json index 1139c9f816..dc66c331b0 100644 --- a/resources/profiles/Sovol.json +++ b/resources/profiles/Sovol.json @@ -1,7 +1,7 @@ { "name": "Sovol", "url": "", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Sovol configurations", "machine_model_list": [ diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json index 7e4a1b232c..739474c390 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json index f598f0464c..2a87643214 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json index f6686c5718..c3df99cb5c 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json index 5ed34435b4..7535223e0a 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json index a98e47d432..09a3b793f8 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json index 8e66ac39b7..09b4a01bca 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json index 3ac6922467..969ca2e52b 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json index e9fa54468c..38857e3841 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json index dd0b5b9f21..cba4597eb8 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json index 8a5661ad38..3f93669137 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json index ae293d4841..e51fe7c0ff 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json index 2859ad0ed5..272b1bdf65 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json index db0e7d0d9c..abaffaf0de 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json index 50eb1ca5a4..43460a7489 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Tronxy.json b/resources/profiles/Tronxy.json index 5c1498973a..55fa64a864 100644 --- a/resources/profiles/Tronxy.json +++ b/resources/profiles/Tronxy.json @@ -1,6 +1,6 @@ { "name": "Tronxy", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Tronxy configurations", "machine_model_list": [ diff --git a/resources/profiles/Tronxy/process/fdm_process_common.json b/resources/profiles/Tronxy/process/fdm_process_common.json index d9b11e2551..bda31378e2 100644 --- a/resources/profiles/Tronxy/process/fdm_process_common.json +++ b/resources/profiles/Tronxy/process/fdm_process_common.json @@ -79,7 +79,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json b/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json index 99b1ec95ff..a35b15c8b2 100644 --- a/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json +++ b/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json @@ -80,7 +80,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/TwoTrees.json b/resources/profiles/TwoTrees.json index 1fef53bef0..54408265be 100644 --- a/resources/profiles/TwoTrees.json +++ b/resources/profiles/TwoTrees.json @@ -1,6 +1,6 @@ { "name": "TwoTrees", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "1", "description": "TwoTrees configurations", "machine_model_list": [ diff --git a/resources/profiles/TwoTrees/process/0.08mm Extra Fine @SK1.json b/resources/profiles/TwoTrees/process/0.08mm Extra Fine @SK1.json index 4feb9e39ce..d921bd17a0 100644 --- a/resources/profiles/TwoTrees/process/0.08mm Extra Fine @SK1.json +++ b/resources/profiles/TwoTrees/process/0.08mm Extra Fine @SK1.json @@ -80,7 +80,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/TwoTrees/process/0.12mm Fine @SK1.json b/resources/profiles/TwoTrees/process/0.12mm Fine @SK1.json index 648094331d..c3485f4a82 100644 --- a/resources/profiles/TwoTrees/process/0.12mm Fine @SK1.json +++ b/resources/profiles/TwoTrees/process/0.12mm Fine @SK1.json @@ -78,7 +78,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/TwoTrees/process/0.16mm Optimal @SK1.json b/resources/profiles/TwoTrees/process/0.16mm Optimal @SK1.json index 1c74438f86..4939b0598d 100644 --- a/resources/profiles/TwoTrees/process/0.16mm Optimal @SK1.json +++ b/resources/profiles/TwoTrees/process/0.16mm Optimal @SK1.json @@ -81,7 +81,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/TwoTrees/process/0.20mm Quality @SK1.json b/resources/profiles/TwoTrees/process/0.20mm Quality @SK1.json index 5b394002eb..249fc21546 100644 --- a/resources/profiles/TwoTrees/process/0.20mm Quality @SK1.json +++ b/resources/profiles/TwoTrees/process/0.20mm Quality @SK1.json @@ -82,7 +82,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "60", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/TwoTrees/process/0.20mm Standard @SK1.json b/resources/profiles/TwoTrees/process/0.20mm Standard @SK1.json index 4eb5e8000d..3b7c5ae399 100644 --- a/resources/profiles/TwoTrees/process/0.20mm Standard @SK1.json +++ b/resources/profiles/TwoTrees/process/0.20mm Standard @SK1.json @@ -82,7 +82,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/TwoTrees/process/0.24mm Draft @SK1.json b/resources/profiles/TwoTrees/process/0.24mm Draft @SK1.json index 303f020c9b..87f969bb7b 100644 --- a/resources/profiles/TwoTrees/process/0.24mm Draft @SK1.json +++ b/resources/profiles/TwoTrees/process/0.24mm Draft @SK1.json @@ -82,7 +82,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/TwoTrees/process/0.24mm HSpeed @SK1.json b/resources/profiles/TwoTrees/process/0.24mm HSpeed @SK1.json index 0eedf1a9cc..be3cb89bc2 100644 --- a/resources/profiles/TwoTrees/process/0.24mm HSpeed @SK1.json +++ b/resources/profiles/TwoTrees/process/0.24mm HSpeed @SK1.json @@ -88,7 +88,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "0", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "700", diff --git a/resources/profiles/TwoTrees/process/0.28mm Extra Draft @SK1.json b/resources/profiles/TwoTrees/process/0.28mm Extra Draft @SK1.json index 5e2eef68f4..b975875d9e 100644 --- a/resources/profiles/TwoTrees/process/0.28mm Extra Draft @SK1.json +++ b/resources/profiles/TwoTrees/process/0.28mm Extra Draft @SK1.json @@ -84,7 +84,7 @@ "top_shell_thickness": "0", "top_surface_acceleration": "5000", "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_speed": "200", "travel_acceleration": "20000", "travel_speed": "500", diff --git a/resources/profiles/UltiMaker.json b/resources/profiles/UltiMaker.json index b05fc11677..840ebb17ee 100644 --- a/resources/profiles/UltiMaker.json +++ b/resources/profiles/UltiMaker.json @@ -1,7 +1,7 @@ { "name": "UltiMaker", "url": "", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "UltiMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json index 567a228c3c..85ba578017 100644 --- a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "7", "top_shell_thickness": "0.8", diff --git a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json index 6e6829860f..61a567fe70 100644 --- a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json index 5740c576b5..a8d8c5d043 100644 --- a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Vivedino.json b/resources/profiles/Vivedino.json index 95cbec2413..40fdf10c16 100644 --- a/resources/profiles/Vivedino.json +++ b/resources/profiles/Vivedino.json @@ -1,6 +1,6 @@ { "name": "Vivedino", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Vivedino configurations", "machine_model_list": [ diff --git a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json index f12f318c52..a775861791 100644 --- a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json +++ b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json index 5208f72290..9e9083ecef 100644 --- a/resources/profiles/Voron.json +++ b/resources/profiles/Voron.json @@ -1,6 +1,6 @@ { "name": "Voron", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Voron configurations", "machine_model_list": [ diff --git a/resources/profiles/Voron/process/fdm_process_voron_common.json b/resources/profiles/Voron/process/fdm_process_voron_common.json index d993c7b5ea..6a38d0129a 100644 --- a/resources/profiles/Voron/process/fdm_process_voron_common.json +++ b/resources/profiles/Voron/process/fdm_process_voron_common.json @@ -84,7 +84,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Voxelab.json b/resources/profiles/Voxelab.json index d4e6471dcd..b1a585d396 100644 --- a/resources/profiles/Voxelab.json +++ b/resources/profiles/Voxelab.json @@ -1,7 +1,7 @@ { "name": "Voxelab", "url": "", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Voxelab configurations", "machine_model_list": [ diff --git a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json index 6aa62f184d..2145de1360 100644 --- a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json index db2d6f6595..8755f614b8 100644 --- a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.38", "top_shell_layers": "5", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Vzbot.json b/resources/profiles/Vzbot.json index cfd5750fd6..81b2611c5c 100644 --- a/resources/profiles/Vzbot.json +++ b/resources/profiles/Vzbot.json @@ -1,6 +1,6 @@ { "name": "Vzbot", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Vzbot configurations", "machine_model_list": [ diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json index 96202dd138..be4437d698 100644 --- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json +++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json @@ -86,7 +86,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json index 5e5a80da0b..eb86d56577 100644 --- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json +++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.52", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json index eedeb3fd31..a973247842 100644 --- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json +++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json @@ -85,7 +85,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.65", "top_shell_layers": "3", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Wanhao.json b/resources/profiles/Wanhao.json index b6574de3ae..c80b0ecf0d 100644 --- a/resources/profiles/Wanhao.json +++ b/resources/profiles/Wanhao.json @@ -1,6 +1,6 @@ { "name": "Wanhao", - "version": "02.00.02.00", + "version": "02.01.00.00", "force_update": "0", "description": "Wanhao configurations", "machine_model_list": [ diff --git a/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json b/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json index bbb877de8f..da5e08d5ac 100644 --- a/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json +++ b/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json @@ -83,7 +83,7 @@ "tree_support_branch_angle": "45", "tree_support_wall_count": "0", "detect_thin_wall": "0", - "top_surface_pattern": "monotonic", + "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8",