1. move the global functions to Model
2. set brim automation paremeters before process
JIRA: STUDIO-4208
Change-Id: I3f75175ec74d214ca2a6d5f3ade56d08e0ecd4f3
(cherry picked from commit bcc88bc01ec396e8fb8af1186b47a75cd5116f3c)
JIRA: STUDIO-4177
different printer may have different hms wiki page
Change-Id: I0f4443580466ab1afc1fe16da6f5ed924e5d201d
Signed-off-by: Stone Li <stone.li@bambulab.com>
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
so that it does not decimate all triangles on very high detailed models
Relevant issue 8834 Access Error when slicing
Github: #2283
Change-Id: I047361c88c561962ef4d3cf67bc0126402c41941
(cherry picked from commit f8aaa5c69d59c5fced4b7bb112376e4df94b5ddc)
when arrange failed and restore to original
we will compute the position of wipe tower again
we should skip this case
JIRA: STUDIO-4048
Change-Id: I19edc36dfa7ec5a9f6b5ba3a1c1e0767361b3e33
fix the ironing be apply to the preview layer of bridge
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Follow-up of 6be84d529d740c44c1e9bf533e70e167b3442063 - Fixed processing of spiral vase mode in GCodeProcessor::process_G1
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz>
* Updated inner outer inner algorithm to cater for edge case where an internal island with multiple internal perimeters would cause the external island to fall back to outer-> inner wall ordering.
Updated inner outer inner algorithm to cater for edge case where an internal island with multiple internal perimeters would cause the external island to fall back to outer-> inner wall ordering.
* Reworked the inner outer inner algorithm to better work with more than 3 perimeters.
* Code comment updates. Removed error check code.
* Cleaned up code and comments
Cleaned up code and comments
* Disabled inner outer inner algorithm on first layer
Disabling inner outer inner algorithm and using inner to outer wall ordering to promote bed adhesion as having isolated perimeters on the bed has resulted on occasion to warping or incomplete adherence to the bed.
* Code optimisation
