* Add "Manual filament change" option and logic
* make suggested changes
* make suggested changes
* change tag from "CHANGE_TOOL" to "MANUAL_TOOL_CHANGE"
* some tweaks
* More fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* Change direction for perimeter extrusion at odd layers.
Initial test code based on supermerill/SuperSlicer@87245ae3c1
* Perimeters for both contours and holes can have alternating direction, to support overhangs on both side.
Also fixes wipe on loop.
* Only reverse order if the loops have steep overhang
* Support a special case that treat every layer as steep overhang
* Add options
* Disable overhang reverse if vase mode is enabled
* Allow extrusion reversal and skip overhang detection if fuzzy skin
---------
Co-authored-by: supermerill <merill@free.fr>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add needed src files and update CMake files
* Implementation of GCodeThumbnailsFormat for PNG, JPG, and QOI complete
* Implement BIQU (Big Tree Tech) Thumbnail Format
* have GCodeProcessor.post_process pass through original line end characters
* fix biqu thumbnail output
use \r\n for new lines in the biqu thumbnail portion. the firmware requires these end characters to function properly.
update names of variables and add comments to be more descriptive
replace modified Qt pixel algorithm with much simpler algorithm from BTT TFT firmware
* rename BiQU to BTT_TFT for better clarity
* remove underscore from GUI option
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* remove hardcoded set chamber temp gcode
* Revert "remove hardcoded set chamber temp gcode"
This reverts commit 8fc1f4a38113087a8fb11901981ca8c9cfdf7777.
* disable heated chamber only if chamber is used/defined
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6bebe0a6abb3ca28d4a162aacbe75f40.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com>
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Z height after timelaps gcode is changed. Should get
the new z height and save into gcode writer.
Jira: none, bug is found by self-test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I25516def507782600f0f270a339c88ea01a472a3
This placeholder can be used for smooth timelapse of i3 type printers.
Change-Id: I953a437a7733835d850812565ff5f31b83292912
(cherry picked from commit 5d5b528541490a9ef762fdad6590b6cddeee2a5b)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
the amount of total extruded material and per extruder extruded material
up to the point the value is evaluated:
"extruded_volume", "extruded_weight",
"extruded_volume_total", "extruded_weight_total"
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!
github issue: https://github.com/bambulab/BambuStudio/issues/2222
Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
(cherry picked from commit 2b07c1154f4a009612f951938e7865dc338b2d9b)
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
(cherry picked from commit 7cbd0b35671518636dcca173220b25f6dc18ec1f)
What: As title. The original code is always apply
at the end of last object of last layer, whichi is before
layer change
Why: the fan spped will be skipped if the last object is
skipped. So we must move the layer time fan speed setting
after changing layer, where is common gcode block and does
not belong to any object.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I442f80e00778b524576210b451f81dd15e25e14c
