Geoffrey Ward 16164e99a9

Add AnkerMake 0.6mm Nozzle Profiles (#4338) ...

* Correct consistency error in layer heights

* Initial 0.6 settings

* Set good retraction values

---------

Co-authored-by: Geofrey Ward <Xelinor@mail.com>

2024-03-05 22:37:28 +08:00

..

Anker Generic ABS 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic ABS 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic ABS @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic ABS.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic ASA 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic ASA 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic ASA @base.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic ASA.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PA 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PA 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PA @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic PA-CF @base.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PA-CF.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PA.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PC 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PC 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PC @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic PC.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PETG 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PETG 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PETG @base.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PETG-CF @base.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PETG-CF.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PETG.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PLA 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic PLA Silk 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA Silk 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA Silk @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic PLA Silk.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PLA-CF @base.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA-CF.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PLA.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PLA+ 0.2 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA+ 0.25 nozzle.json

Add 0.2mm and 0.25mm nozzle profiles to AnkerMake printers (#4260)

2024-03-01 21:37:08 +08:00

Anker Generic PLA+ @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic PLA+.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic PVA @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic PVA.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

Anker Generic TPU @base.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

Anker Generic TPU.json

Add AnkerMake 0.6mm Nozzle Profiles (#4338)

2024-03-05 22:37:28 +08:00

fdm_filament_abs.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_asa.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_common.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_pa.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_pc.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_pet.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_pla.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_pva.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00

fdm_filament_tpu.json

Refactor anker (#3845)

2024-01-28 10:01:44 +08:00