diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx index 77fdf5a83b..a108d837fd 100644 --- a/resources/profiles/PrusaResearch.idx +++ b/resources/profiles/PrusaResearch.idx @@ -1,4 +1,5 @@ min_slic3r_version = 2.6.0-alpha5 +1.9.0-alpha1 Added profiles for Original Prusa MK4. 1.9.0-alpha0 Updated output filename format. 1.7.0-alpha2 Updated compatibility condition in some filament profiles (Prusa XL). 1.7.0-alpha1 Added profiles for Original Prusa XL. Added filament profile for Prusament PETG Tungsten 75%. @@ -8,10 +9,12 @@ min_slic3r_version = 2.6.0-alpha1 1.6.0-alpha1 Updated FW version notification. Decreased min layer time for PLA. 1.6.0-alpha0 Default top fill set to monotonic lines. Updated infill/perimeter overlap values. Updated output filename format. Enabled dynamic overhang speeds. min_slic3r_version = 2.5.1-rc0 +1.6.3 Added SLA materials. 1.6.2 Updated compatibility condition in some filament profiles (Prusa XL). 1.6.1 Added filament profile for Prusament PETG Tungsten 75%. Updated Prusa XL profiles. 1.6.0 Added Original Prusa XL profiles. Updated acceleration settings for Prusa MINI. Updated infill/perimeter overlap values. min_slic3r_version = 2.5.0-alpha0 +1.5.9 Added SLA materials. 1.5.8 Added filament profile for Prusament PETG Tungsten 75%. Updated FW version notification. 1.5.7 Added filament profile for Prusament PETG Carbon Fiber and Fiberthree F3 PA-GF30 Pro. 1.5.6 Updated FW version notification (MK2.5/MK3 family). Added filament profile for Kimya PEBA-S. diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index f57a8110d7..0194657972 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 1.9.0-alpha0 +config_version = 1.9.0-alpha1 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -14,14 +14,14 @@ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. -[printer_model:XL] -name = Original Prusa XL -variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8 +[printer_model:MK4] +name = Original Prusa MK4 +variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8 technology = FFF -family = XL -bed_model = xl_bed.stl -bed_texture = xl.svg -default_materials = Generic PLA @PG 0.6; Generic ABS @PG 0.6; Generic PETG @PG 0.6; Prusament PLA @PG 0.6; Prusament PETG @PG 0.6; Prusament ASA @PG 0.6; Prusament PC Blend @PG 0.6; Prusament PC Blend Carbon Fiber @PG 0.6; Prusament PVB @PG 0.6; Prusament PA11 Carbon Fiber @PG 0.6 +family = MK4 +bed_model = mk4_bed.stl +bed_texture = mk4.svg +default_materials = Generic PLA @PG; Generic ABS @MK4; Generic PETG @PG; Prusament PLA @PG; Prusament PETG @PG; Prusament ASA @MK4; Prusament PC Blend @MK4; Prusament PC Blend Carbon Fiber @MK4; Prusament PVB @PG; Prusament PA11 Carbon Fiber @PG [printer_model:MINI] name = Original Prusa MINI && MINI+ @@ -68,6 +68,15 @@ bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 +[printer_model:XL] +name = Original Prusa XL +variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8 +technology = FFF +family = XL +bed_model = xl_bed.stl +bed_texture = xl.svg +default_materials = Generic PLA @PG 0.6; Generic ABS @PG 0.6; Generic PETG @PG 0.6; Prusament PLA @PG 0.6; Prusament PETG @PG 0.6; Prusament ASA @PG 0.6; Prusament PC Blend @PG 0.6; Prusament PC Blend Carbon Fiber @PG 0.6; Prusament PVB @PG 0.6; Prusament PA11 Carbon Fiber @PG 0.6 + [printer_model:MK2.5S] name = Original Prusa i3 MK2.5S variants = 0.4; 0.25; 0.6; 0.8 @@ -284,6 +293,30 @@ raft_first_layer_density = 80% ## gcode_substitutions = "; stop printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S-1\\n";r;;"; printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S$2\\nM486 N$1\\n";r; output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode +[print:*MK4*] +inherits = *common* +single_extruder_multi_material_priming = 0 +travel_speed = 200 +travel_speed_z = 12 +fill_density = 15% +default_acceleration = 1000 +bridge_acceleration = 800 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +infill_anchor = 2 +perimeter_acceleration = 800 +first_layer_acceleration = 600 +fill_pattern = grid +skirts = 0 +extruder_clearance_height = 13 +extruder_clearance_radius = 45 +first_layer_speed = 20 +support_material_threshold = 45 +raft_first_layer_density = 80% +## gcode_substitutions = "; stop printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S-1\\n";r;;"; printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S$2\\nM486 N$1\\n";r; +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode + [print:*MK306*] inherits = *MK3* fill_pattern = gyroid @@ -363,6 +396,9 @@ infill_anchor = 1 perimeters = 3 brim_separation = 0 +[print:*0.25nozzleMK4*] +inherits = *0.25nozzleXL* + [print:*0.3nozzle*] external_perimeter_extrusion_width = 0.33 extrusion_width = 0.33 @@ -434,6 +470,9 @@ fill_density = 20% support_material_interface_spacing = 0.25 infill_anchor = 2.5 +[print:*0.6nozzleMK4*] +inherits = *0.6nozzleXL* + [print:*0.6nozzleMINI*] inherits = *0.6nozzleMK3* infill_extrusion_width = 0.68 @@ -502,6 +541,13 @@ support_material_style = snug raft_first_layer_expansion = 2 default_acceleration = 1250 infill_anchor = 2.5 +first_layer_acceleration = 500 + +[print:*0.8nozzleMK4*] +inherits = *0.8nozzleXL* +default_acceleration = 1000 +infill_acceleration = 2000 +first_layer_acceleration = 600 [print:*soluble_support*] overhangs = 1 @@ -1848,7 +1894,7 @@ compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.25 [print:0.05mm ULTRADETAIL @XL 0.3] inherits = *0.05mm*; *XL*; *0.3nozzle* -top_solid_layers = 12 +top_solid_layers = 14 bottom_solid_layers = 9 support_material_contact_distance = 0.07 raft_contact_distance = 0.07 @@ -1987,6 +2033,8 @@ compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.3 [print:0.07mm ULTRADETAIL @XL 0.4] inherits = *0.07mm*; *XL* +thick_bridges = 1 +bridge_flow_ratio = 0.6 top_infill_extrusion_width = 0.4 first_layer_extrusion_width = 0.45 perimeter_extrusion_width = 0.4 @@ -2173,13 +2221,13 @@ bridge_acceleration = 1000 first_layer_acceleration = 600 default_acceleration = 1250 max_print_speed = 200 -external_perimeter_extrusion_width = 0.55 -extrusion_width = 0.55 +external_perimeter_extrusion_width = 0.5 +extrusion_width = 0.5 first_layer_extrusion_width = 0.5 -infill_extrusion_width = 0.55 -perimeter_extrusion_width = 0.55 -solid_infill_extrusion_width = 0.55 -top_infill_extrusion_width = 0.42 +infill_extrusion_width = 0.5 +perimeter_extrusion_width = 0.5 +solid_infill_extrusion_width = 0.5 +top_infill_extrusion_width = 0.45 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.4 @@ -2311,6 +2359,7 @@ compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.5 [print:0.15mm DETAIL @XL 0.6] inherits = *0.15mm*; *XL*; *0.6nozzleXL* +fill_pattern = gyroid perimeter_speed = 45 external_perimeter_speed = 30 small_perimeter_speed = 30 @@ -2345,6 +2394,7 @@ compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.6 [print:0.20mm DETAIL @XL 0.6] inherits = *0.20mm*; *XL*; *0.6nozzleXL* +fill_pattern = gyroid perimeter_speed = 50 external_perimeter_speed = 35 small_perimeter_speed = 30 @@ -2425,7 +2475,7 @@ external_perimeter_acceleration = 1000 perimeter_acceleration = 1200 solid_infill_acceleration = 2000 infill_acceleration = 3000 -top_solid_layers = 4 +top_solid_layers = 5 bottom_solid_layers = 4 default_acceleration = 1250 dynamic_overhang_speeds = 35,20,15,15 @@ -2603,6 +2653,910 @@ top_solid_infill_acceleration = 800 solid_infill_acceleration = 2000 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 +## MK4 ## + +## MK4 - 0.25mm nozzle + +[print:0.05mm ULTRADETAIL @MK4 0.25] +inherits = *0.05mm*; *MK4*; *0.25nozzleMK4* +support_material_contact_distance = 0.07 +raft_contact_distance = 0.1 +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 40 +solid_infill_speed = 40 +top_solid_infill_speed = 25 +support_material_speed = 30 +support_material_interface_speed = 80% +gap_fill_speed = 25 +gcode_resolution = 0.006 +external_perimeter_acceleration = 300 +perimeter_acceleration = 300 +top_solid_infill_acceleration = 600 +solid_infill_acceleration = 800 +infill_acceleration = 800 +bridge_acceleration = 300 +first_layer_acceleration = 600 +default_acceleration = 800 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25 + +[print:0.07mm ULTRADETAIL @MK4 0.25] +inherits = *0.07mm*; *MK4*; *0.25nozzleMK4* +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 45 +solid_infill_speed = 45 +top_solid_infill_speed = 35 +support_material_speed = 30 +support_material_interface_speed = 80% +support_material_contact_distance = 0.07 +gap_fill_speed = 25 +bridge_speed = 20 +external_perimeter_acceleration = 300 +perimeter_acceleration = 300 +top_solid_infill_acceleration = 500 +solid_infill_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 300 +first_layer_acceleration = 600 +default_acceleration = 800 +max_print_speed = 200 +gcode_resolution = 0.006 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25 + +[print:0.10mm QUALITY @MK4 0.25] +inherits = *0.10mm*; *MK4*; *0.25nozzleMK4* +perimeter_speed = 35 +external_perimeter_speed = 20 +small_perimeter_speed = 25 +infill_speed = 60 +solid_infill_speed = 60 +top_solid_infill_speed = 30 +support_material_speed = 40 +support_material_interface_speed = 85% +support_material_contact_distance = 0.07 +gap_fill_speed = 30 +bridge_speed = 20 +external_perimeter_acceleration = 400 +perimeter_acceleration = 500 +top_solid_infill_acceleration = 600 +solid_infill_acceleration = 800 +infill_acceleration = 1200 +bridge_acceleration = 500 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25 + +[print:0.12mm QUALITY @MK4 0.25] +inherits = *0.12mm*; *MK4*; *0.25nozzleMK4* +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 60 +solid_infill_speed = 60 +top_solid_infill_speed = 30 +support_material_speed = 50 +support_material_interface_speed = 80% +support_material_contact_distance = 0.08 +gap_fill_speed = 40 +bridge_speed = 25 +external_perimeter_acceleration = 500 +perimeter_acceleration = 500 +top_solid_infill_acceleration = 600 +solid_infill_acceleration = 1000 +infill_acceleration = 1200 +bridge_acceleration = 500 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +gcode_resolution = 0.008 +perimeter_extrusion_width = 0.27 +external_perimeter_extrusion_width = 0.27 +infill_extrusion_width = 0.27 +solid_infill_extrusion_width = 0.27 +top_infill_extrusion_width = 0.25 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25 + +[print:0.15mm SPEED @MK4 0.25] +inherits = *0.15mm*; *MK4*; *0.25nozzleMK4* +perimeter_speed = 35 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 80 +solid_infill_speed = 60 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 80% +support_material_contact_distance = 0.08 +gap_fill_speed = 45 +bridge_speed = 25 +external_perimeter_acceleration = 500 +perimeter_acceleration = 500 +top_solid_infill_acceleration = 600 +solid_infill_acceleration = 1000 +infill_acceleration = 1200 +bridge_acceleration = 500 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.3 +perimeter_extrusion_width = 0.27 +external_perimeter_extrusion_width = 0.27 +infill_extrusion_width = 0.27 +solid_infill_extrusion_width = 0.27 +top_infill_extrusion_width = 0.25 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25 + +## MK4 - 0.3mm nozzle + +[print:0.05mm ULTRADETAIL @MK4 0.3] +inherits = *0.05mm*; *MK4*; *0.3nozzle* +top_solid_layers = 14 +bottom_solid_layers = 9 +support_material_contact_distance = 0.07 +raft_contact_distance = 0.07 +perimeter_speed = 25 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 45 +solid_infill_speed = 45 +top_solid_infill_speed = 35 +support_material_speed = 40 +support_material_interface_speed = 80% +gap_fill_speed = 25 +gcode_resolution = 0.006 +external_perimeter_acceleration = 300 +perimeter_acceleration = 300 +top_solid_infill_acceleration = 600 +solid_infill_acceleration = 800 +infill_acceleration = 800 +bridge_acceleration = 500 +default_acceleration = 800 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3 + +[print:0.08mm DETAIL @MK4 0.3] +inherits = *0.07mm*; *MK4*; *0.3nozzle* +layer_height = 0.08 +support_material_contact_distance = 0.08 +raft_contact_distance = 0.08 +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 60 +solid_infill_speed = 60 +top_solid_infill_speed = 35 +support_material_speed = 40 +support_material_interface_speed = 80% +gap_fill_speed = 25 +bridge_speed = 20 +external_perimeter_acceleration = 500 +perimeter_acceleration = 600 +top_solid_infill_acceleration = 700 +solid_infill_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +perimeters = 3 +gcode_resolution = 0.006 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3 + +[print:0.12mm QUALITY @MK4 0.3] +inherits = *0.12mm*; *MK4*; *0.3nozzle* +support_material_contact_distance = 0.1 +raft_contact_distance = 0.1 +perimeter_speed = 35 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 80 +solid_infill_speed = 80 +top_solid_infill_speed = 30 +support_material_speed = 45 +support_material_interface_speed = 85% +gap_fill_speed = 40 +bridge_speed = 25 +external_perimeter_acceleration = 600 +perimeter_acceleration = 800 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1200 +infill_acceleration = 1500 +bridge_acceleration = 800 +default_acceleration = 1000 +max_print_speed = 200 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3 + +[print:0.16mm SPEED @MK4 0.3] +inherits = *0.16mm*; *MK4*; *0.3nozzle* +support_material_contact_distance = 0.15 +raft_contact_distance = 0.15 +perimeter_speed = 50 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 90 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_speed = 45 +support_material_interface_speed = 80% +gap_fill_speed = 40 +bridge_speed = 25 +external_perimeter_acceleration = 600 +perimeter_acceleration = 800 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1250 +bridge_acceleration = 800 +default_acceleration = 1000 +max_print_speed = 200 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3 + +[print:0.20mm DRAFT @MK4 0.3] +inherits = *0.20mm*; *MK4*; *0.3nozzle* +support_material_contact_distance = 0.18 +raft_contact_distance = 0.18 +perimeter_speed = 50 +external_perimeter_speed = 35 +small_perimeter_speed = 30 +infill_speed = 90 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 80% +gap_fill_speed = 45 +bridge_speed = 25 +external_perimeter_acceleration = 700 +perimeter_acceleration = 800 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1250 +bridge_acceleration = 800 +default_acceleration = 1250 +max_print_speed = 200 +first_layer_extrusion_width = 0.4 +perimeter_extrusion_width = 0.35 +external_perimeter_extrusion_width = 0.35 +infill_extrusion_width = 0.35 +solid_infill_extrusion_width = 0.35 +top_infill_extrusion_width = 0.3 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3 + +## MK4 - 0.4mm nozzle + +[print:0.05mm ULTRADETAIL @MK4 0.4] +inherits = *0.05mm*; *MK4* +thick_bridges = 1 +bridge_flow_ratio = 0.6 +top_infill_extrusion_width = 0.4 +first_layer_extrusion_width = 0.45 +perimeter_extrusion_width = 0.4 +external_perimeter_extrusion_width = 0.4 +infill_extrusion_width = 0.4 +solid_infill_extrusion_width = 0.4 +perimeters = 3 +support_material_contact_distance = 0.1 +raft_contact_distance = 0.1 +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 40 +solid_infill_speed = 40 +top_solid_infill_speed = 30 +support_material_style = snug +support_material_interface_layers = 0 +support_material_speed = 30 +support_material_interface_speed = 80% +support_material_spacing = 1.5 +gap_fill_speed = 25 +gcode_resolution = 0.006 +external_perimeter_acceleration = 300 +perimeter_acceleration = 300 +top_solid_infill_acceleration = 500 +solid_infill_acceleration = 700 +infill_acceleration = 800 +bridge_acceleration = 300 +default_acceleration = 800 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.07mm ULTRADETAIL @MK4 0.4] +inherits = *0.07mm*; *MK4* +thick_bridges = 1 +bridge_flow_ratio = 0.6 +top_infill_extrusion_width = 0.4 +first_layer_extrusion_width = 0.45 +perimeter_extrusion_width = 0.4 +external_perimeter_extrusion_width = 0.4 +infill_extrusion_width = 0.4 +solid_infill_extrusion_width = 0.4 +perimeters = 3 +support_material_contact_distance = 0.1 +raft_contact_distance = 0.1 +perimeter_speed = 35 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 45 +solid_infill_speed = 45 +top_solid_infill_speed = 30 +support_material_style = snug +support_material_interface_layers = 0 +support_material_speed = 35 +support_material_interface_speed = 80% +support_material_spacing = 1.5 +gap_fill_speed = 25 +gcode_resolution = 0.006 +external_perimeter_acceleration = 300 +perimeter_acceleration = 300 +top_solid_infill_acceleration = 500 +solid_infill_acceleration = 800 +infill_acceleration = 800 +bridge_acceleration = 300 +first_layer_acceleration = 600 +default_acceleration = 800 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.10mm DETAIL @MK4 0.4] +inherits = *0.10mm*; *MK4* +support_material_contact_distance = 0.17 +raft_contact_distance = 0.15 +perimeter_speed = 45 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 80 +solid_infill_speed = 80 +top_solid_infill_speed = 35 +support_material_style = snug +support_material_interface_layers = 5 +support_material_speed = 40 +support_material_interface_speed = 85% +support_material_xy_spacing = 80% +gap_fill_speed = 40 +bridge_speed = 20 +external_perimeter_acceleration = 500 +perimeter_acceleration = 700 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1250 +infill_acceleration = 1500 +bridge_acceleration = 700 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.5 +perimeter_extrusion_width = 0.4 +external_perimeter_extrusion_width = 0.4 +infill_extrusion_width = 0.4 +solid_infill_extrusion_width = 0.4 +top_infill_extrusion_width = 0.4 +perimeters = 3 +gcode_resolution = 0.006 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.15mm QUALITY @MK4 0.4] +inherits = *0.15mm*; *MK4* +perimeter_speed = 45 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 90 +solid_infill_speed = 90 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.2 +raft_contact_distance = 0.15 +support_material_style = snug +support_material_interface_layers = 5 +support_material_speed = 45 +support_material_interface_speed = 80% +support_material_xy_spacing = 80% +gap_fill_speed = 40 +bridge_speed = 25 +external_perimeter_acceleration = 700 +perimeter_acceleration = 900 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +bridge_acceleration = 1000 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.5 +support_material_extrusion_width = 0.37 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.15mm SPEED @MK4 0.4] +inherits = *0.15mm*; *MK4* +perimeter_speed = 70 +external_perimeter_speed = 40 +small_perimeter_speed = 35 +infill_speed = 200 +solid_infill_speed = 200 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.2 +raft_contact_distance = 0.15 +support_material_style = snug +support_material_interface_layers = 5 +support_material_speed = 45 +support_material_interface_speed = 80% +support_material_xy_spacing = 80% +gap_fill_speed = 40 +bridge_speed = 25 +external_perimeter_acceleration = 800 +perimeter_acceleration = 1000 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +bridge_acceleration = 1000 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.5 +support_material_extrusion_width = 0.37 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.20mm QUALITY @MK4 0.4] +inherits = *0.20mm*; *MK4* +perimeter_speed = 45 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 90 +solid_infill_speed = 90 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.2 +raft_contact_distance = 0.2 +support_material_style = snug +support_material_interface_layers = 5 +support_material_xy_spacing = 80% +support_material_speed = 50 +support_material_interface_speed = 70% +gap_fill_speed = 40 +bridge_speed = 25 +external_perimeter_acceleration = 700 +perimeter_acceleration = 900 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +bridge_acceleration = 1000 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.5 +gcode_resolution = 0.008 +support_material_extrusion_width = 0.37 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.20mm SPEED @MK4 0.4] +inherits = *0.20mm*; *MK4* +perimeter_speed = 70 +external_perimeter_speed = 40 +small_perimeter_speed = 35 +infill_speed = 200 +solid_infill_speed = 200 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.2 +raft_contact_distance = 0.2 +support_material_style = snug +support_material_interface_layers = 5 +support_material_speed = 50 +support_material_interface_speed = 70% +support_material_xy_spacing = 80% +gap_fill_speed = 45 +bridge_speed = 25 +external_perimeter_acceleration = 800 +perimeter_acceleration = 1000 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +bridge_acceleration = 1000 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.5 +support_material_extrusion_width = 0.37 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +[print:0.30mm DRAFT @MK4 0.4] +inherits = *0.30mm*; *MK4* +bottom_solid_layers = 3 +perimeter_speed = 70 +external_perimeter_speed = 40 +small_perimeter_speed = 40 +infill_speed = 95 +solid_infill_speed = 85 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.2 +raft_contact_distance = 0.2 +support_material_style = snug +support_material_interface_layers = 5 +support_material_speed = 60 +support_material_interface_speed = 70% +support_material_xy_spacing = 80% +gap_fill_speed = 45 +bridge_speed = 25 +external_perimeter_acceleration = 1000 +perimeter_acceleration = 1100 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1700 +infill_acceleration = 2000 +bridge_acceleration = 1000 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +external_perimeter_extrusion_width = 0.5 +extrusion_width = 0.5 +first_layer_extrusion_width = 0.5 +infill_extrusion_width = 0.5 +perimeter_extrusion_width = 0.5 +solid_infill_extrusion_width = 0.5 +top_infill_extrusion_width = 0.45 +support_material_extrusion_width = 0.38 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4 + +## MK4 - 0.5mm nozzle + +[print:0.10mm DETAIL @MK4 0.5] +inherits = *0.10mm*; *MK4*; *0.5nozzle* +fill_pattern = gyroid +perimeter_speed = 40 +external_perimeter_speed = 25 +small_perimeter_speed = 25 +infill_speed = 80 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 85% +support_material_style = snug +support_material_interface_layers = 4 +gap_fill_speed = 40 +bridge_speed = 30 +external_perimeter_acceleration = 700 +perimeter_acceleration = 800 +solid_infill_acceleration = 1200 +infill_acceleration = 1500 +bridge_acceleration = 1000 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +first_layer_extrusion_width = 0.5 +perimeter_extrusion_width = 0.5 +external_perimeter_extrusion_width = 0.5 +infill_extrusion_width = 0.5 +solid_infill_extrusion_width = 0.5 +top_infill_extrusion_width = 0.45 +perimeters = 2 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5 + +[print:0.15mm QUALITY @MK4 0.5] +inherits = *0.15mm*; *MK4*; *0.5nozzle* +fill_pattern = gyroid +perimeter_speed = 45 +external_perimeter_speed = 30 +small_perimeter_speed = 25 +infill_speed = 120 +solid_infill_speed = 120 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 70% +support_material_style = snug +support_material_interface_layers = 4 +gap_fill_speed = 40 +bridge_speed = 30 +external_perimeter_acceleration = 800 +perimeter_acceleration = 900 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +bridge_acceleration = 1000 +first_layer_acceleration = 600 +default_acceleration = 1000 +max_print_speed = 200 +gcode_resolution = 0.008 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5 + +[print:0.20mm QUALITY @MK4 0.5] +inherits = 0.15mm QUALITY @MK4 0.5; *0.20mm*; *MK4*; *0.5nozzle* +perimeter_speed = 50 +external_perimeter_speed = 35 +small_perimeter_speed = 30 +gcode_resolution = 0.01 +support_material_interface_layers = 4 +infill_speed = 200 +solid_infill_speed = 120 +support_material_speed = 50 +support_material_interface_speed = 70% +external_perimeter_acceleration = 800 +perimeter_acceleration = 900 +infill_acceleration = 2000 +default_acceleration = 1000 +max_print_speed = 200 + +[print:0.25mm SPEED @MK4 0.5] +inherits = *0.25mm*; *MK4*; *0.5nozzle* +bottom_solid_layers = 3 +perimeter_speed = 70 +external_perimeter_speed = 40 +small_perimeter_speed = 35 +infill_speed = 200 +solid_infill_speed = 100 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 75% +support_material_style = snug +support_material_interface_layers = 4 +support_material_contact_distance = 0.25 +raft_contact_distance = 0.25 +gap_fill_speed = 45 +bridge_speed = 25 +external_perimeter_acceleration = 900 +perimeter_acceleration = 1000 +infill_acceleration = 2000 +bridge_acceleration = 800 +default_acceleration = 1000 +max_print_speed = 200 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5 + +[print:0.32mm DRAFT @MK4 0.5] +inherits = *0.32mm*; *MK4*; *0.5nozzle* +bottom_solid_layers = 3 +perimeter_speed = 70 +external_perimeter_speed = 45 +small_perimeter_speed = 40 +infill_speed = 200 +solid_infill_speed = 100 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 75% +support_material_style = snug +support_material_interface_layers = 4 +support_material_contact_distance = 0.3 +support_material_extrusion_width = 0.42 +raft_contact_distance = 0.3 +gap_fill_speed = 45 +bridge_speed = 25 +external_perimeter_acceleration = 1000 +perimeter_acceleration = 1000 +infill_acceleration = 2000 +bridge_acceleration = 1000 +default_acceleration = 1000 +max_print_speed = 200 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5 + +## MK4 - 0.6mm nozzle + +[print:0.15mm DETAIL @MK4 0.6] +inherits = *0.15mm*; *MK4*; *0.6nozzleMK4* +fill_pattern = gyroid +perimeter_speed = 45 +external_perimeter_speed = 30 +small_perimeter_speed = 30 +infill_speed = 100 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.22 +raft_contact_distance = 0.2 +support_material_style = snug +support_material_interface_layers = 4 +support_material_speed = 50 +support_material_interface_speed = 80% +gap_fill_speed = 40 +bridge_speed = 25 +extrusion_width = 0.65 +external_perimeter_extrusion_width = 0.6 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.6 +perimeter_extrusion_width = 0.6 +solid_infill_extrusion_width = 0.6 +top_infill_extrusion_width = 0.5 +support_material_extrusion_width = 0.5 +external_perimeter_acceleration = 800 +perimeter_acceleration = 800 +infill_acceleration = 2000 +bridge_acceleration = 800 +default_acceleration = 1000 +bridge_flow_ratio = 1 +max_print_speed = 200 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[print:0.20mm DETAIL @MK4 0.6] +inherits = *0.20mm*; *MK4*; *0.6nozzleMK4* +fill_pattern = gyroid +perimeter_speed = 50 +external_perimeter_speed = 35 +small_perimeter_speed = 30 +infill_speed = 120 +solid_infill_speed = 80 +support_material_contact_distance = 0.22 +raft_contact_distance = 0.2 +support_material_style = snug +support_material_interface_layers = 4 +top_solid_infill_speed = 40 +support_material_speed = 50 +support_material_interface_speed = 80% +gap_fill_speed = 40 +bridge_speed = 25 +extrusion_width = 0.65 +external_perimeter_extrusion_width = 0.6 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.6 +perimeter_extrusion_width = 0.6 +solid_infill_extrusion_width = 0.6 +top_infill_extrusion_width = 0.5 +support_material_extrusion_width = 0.5 +external_perimeter_acceleration = 800 +perimeter_acceleration = 900 +infill_acceleration = 2000 +default_acceleration = 1000 +bridge_flow_ratio = 1 +max_print_speed = 200 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[print:0.25mm QUALITY @MK4 0.6] +inherits = *0.25mm*; *MK4*; *0.6nozzleMK4* +perimeter_speed = 60 +external_perimeter_speed = 35 +small_perimeter_speed = 30 +infill_speed = 200 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.25 +raft_contact_distance = 0.25 +support_material_style = snug +support_material_interface_layers = 4 +support_material_speed = 50 +support_material_interface_speed = 75% +gap_fill_speed = 40 +bridge_speed = 25 +extrusion_width = 0.65 +top_infill_extrusion_width = 0.55 +support_material_extrusion_width = 0.5 +external_perimeter_acceleration = 800 +perimeter_acceleration = 1000 +infill_acceleration = 2000 +bridge_acceleration = 1000 +default_acceleration = 1000 +bridge_flow_ratio = 1 +top_solid_layers = 5 +bottom_solid_layers = 4 +max_print_speed = 200 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[print:0.32mm SPEED @MK4 0.6] +inherits = *0.32mm*; *MK4*; *0.6nozzleMK4* +perimeter_speed = 65 +external_perimeter_speed = 40 +small_perimeter_speed = 35 +infill_speed = 200 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +support_material_contact_distance = 0.25 +raft_contact_distance = 0.25 +support_material_style = snug +support_material_interface_layers = 4 +support_material_speed = 50 +support_material_interface_speed = 75% +gap_fill_speed = 50 +bridge_speed = 25 +extrusion_width = 0.68 +external_perimeter_extrusion_width = 0.68 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +top_infill_extrusion_width = 0.55 +support_material_extrusion_width = 0.5 +external_perimeter_acceleration = 800 +perimeter_acceleration = 1000 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +first_layer_acceleration = 600 +default_acceleration = 1000 +bridge_flow_ratio = 0.95 +max_print_speed = 200 +bottom_solid_layers = 3 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[print:0.40mm DRAFT @MK4 0.6] +inherits = *0.40mm*; *MK4*; *0.6nozzleMK4* +perimeter_speed = 60 +external_perimeter_speed = 40 +small_perimeter_speed = 35 +infill_speed = 200 +solid_infill_speed = 55 +top_solid_infill_speed = 40 +support_material_contact_distance = 0.25 +raft_contact_distance = 0.25 +support_material_style = snug +support_material_interface_layers = 4 +support_material_speed = 50 +support_material_interface_speed = 80% +gap_fill_speed = 40 +bridge_speed = 25 +extrusion_width = 0.68 +external_perimeter_extrusion_width = 0.68 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.5 +external_perimeter_acceleration = 900 +perimeter_acceleration = 1000 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +default_acceleration = 1500 +bridge_flow_ratio = 0.95 +dynamic_overhang_speeds = 30,20,15,15 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +## MK4 - 0.8mm nozzle + +[print:0.30mm DETAIL @MK4 0.8] +inherits = *0.30mm*; *MK4*; *0.8nozzleMK4* +perimeter_speed = 45 +external_perimeter_speed = 30 +small_perimeter_speed = 30 +infill_speed = 70 +solid_infill_speed = 50 +support_material_speed = 40 +support_material_interface_speed = 90% +top_solid_infill_speed = 35 +bridge_speed = 22 +gap_fill_speed = 30 +top_infill_extrusion_width = 0.75 +support_material_extrusion_width = 0.7 +external_perimeter_acceleration = 800 +perimeter_acceleration = 1000 +bridge_acceleration = 1000 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 + +[print:0.40mm QUALITY @MK4 0.8] +inherits = *0.40mm*; *MK4*; *0.8nozzleMK4* +perimeter_speed = 45 +external_perimeter_speed = 35 +small_perimeter_speed = 30 +infill_speed = 65 +solid_infill_speed = 45 +top_solid_infill_speed = 35 +support_material_speed = 40 +support_material_interface_speed = 90% +bridge_speed = 22 +gap_fill_speed = 30 +top_infill_extrusion_width = 0.8 +support_material_extrusion_width = 0.7 +external_perimeter_acceleration = 800 +perimeter_acceleration = 1000 +bridge_acceleration = 1000 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 + +[print:0.55mm DRAFT @MK4 0.8] +inherits = *MK4*; *0.8nozzleMK4* +layer_height = 0.55 +top_solid_layers = 4 +bottom_solid_layers = 3 +perimeter_speed = 40 +external_perimeter_speed = 30 +small_perimeter_speed = 30 +infill_speed = 55 +solid_infill_speed = 35 +top_solid_infill_speed = 30 +support_material_speed = 35 +support_material_interface_speed = 90% +bridge_speed = 22 +gap_fill_speed = 30 +top_infill_extrusion_width = 0.8 +support_material_extrusion_width = 0.7 +perimeter_extrusion_width = 1 +external_perimeter_extrusion_width = 1 +external_perimeter_acceleration = 1000 +perimeter_acceleration = 1000 +bridge_acceleration = 1000 +top_solid_infill_acceleration = 800 +solid_infill_acceleration = 1500 +infill_acceleration = 2000 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 + # XXXXXXxxXXXXXXXXXXXXXX # XXX--- filament ---XXX # XXXXXXXXxxXXXXXXXXXXXX @@ -2611,7 +3565,7 @@ compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 cooling = 1 compatible_printers = # For now, all but selected filaments are disabled for the MMU 2.0 -compatible_printers_condition = ! single_extruder_multi_material and printer_model!="XL" +compatible_printers_condition = ! single_extruder_multi_material and printer_notes!~/.*PG.*/ end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 filament_loading_speed = 28 @@ -2654,11 +3608,11 @@ min_fan_speed = 100 temperature = 210 slowdown_below_layer_time = 10 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" -compatible_printers_condition = ! single_extruder_multi_material and printer_model!="XL" +compatible_printers_condition = ! single_extruder_multi_material and printer_notes!~/.*PG.*/ [filament:*PLAPG*] start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.06{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.08{elsif nozzle_diameter[0]==0.35}0.07{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" -compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 +compatible_printers_condition = printer_notes=~/.*PG.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 slowdown_below_layer_time = 8 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 @@ -2675,13 +3629,13 @@ filament_unloading_speed_start = 100 [filament:*PLA06PG*] inherits = *PLAPG* -compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_notes=~/.*PG.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15.5 slowdown_below_layer_time = 10 [filament:*PLA08PG*] inherits = *PLAPG* -compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_notes=~/.*PG.*/ and nozzle_diameter[0]==0.8 filament_max_volumetric_speed = 19 slowdown_below_layer_time = 18 @@ -2704,15 +3658,15 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no temperature = 240 filament_retract_length = 1 filament_retract_lift = 0.2 -compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:*PET06*] inherits = *PET* -compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_max_volumetric_speed = 15 [filament:*PETPG*] -compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 +compatible_printers_condition = printer_notes=~/.*PG.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 filament_max_volumetric_speed = 10 start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.08{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.1{elsif nozzle_diameter[0]==0.35}0.09{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" filament_cooling_final_speed = 1 @@ -2733,24 +3687,25 @@ slowdown_below_layer_time = 9 [filament:*PET06PG*] inherits = *PETPG* -compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_notes=~/.*PG.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 17 slowdown_below_layer_time = 12 +filament_retract_length = 0.9 [filament:*PET08PG*] inherits = *PETPG* -compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_notes=~/.*PG.*/ and nozzle_diameter[0]==0.8 filament_max_volumetric_speed = 22 slowdown_below_layer_time = 18 +filament_retract_length = 0.8 [filament:*04PLUS*] -compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! single_extruder_multi_material and printer_model!="XL" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! single_extruder_multi_material and printer_notes!~/.*PG.*/ [filament:*04PLUSPG*] -compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="XL" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ [filament:*PETMMU1*] -# inherits = *PET* filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = 0.2 @@ -2834,7 +3789,7 @@ max_fan_speed = 30 min_fan_speed = 20 temperature = 255 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" -compatible_printers_condition = printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*ABSC*] inherits = *common* @@ -2856,7 +3811,7 @@ min_fan_speed = 15 min_print_speed = 15 temperature = 255 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" -compatible_printers_condition = printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*ABSPG*] compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 @@ -2884,6 +3839,21 @@ filament_max_volumetric_speed = 18 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 slowdown_below_layer_time = 25 +[filament:*ABSMK4*] +inherits = *ABSPG* +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 + +[filament:*ABS06MK4*] +inherits = *ABSMK4* +filament_max_volumetric_speed = 15 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[filament:*ABS08MK4*] +inherits = *ABSMK4* +filament_max_volumetric_speed = 18 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 +slowdown_below_layer_time = 25 + [filament:*PCPG*] inherits = *ABSPG* filament_max_volumetric_speed = 8 @@ -2902,6 +3872,22 @@ inherits = *PCPG* filament_max_volumetric_speed = 20 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 +[filament:*PCMK4*] +inherits = *ABSMK4* +filament_max_volumetric_speed = 8 +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp\n" +## idle_temperature = 170 + +[filament:*PC06MK4*] +inherits = *PCMK4* +filament_max_volumetric_speed = 14 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[filament:*PC08MK4*] +inherits = *PCMK4* +filament_max_volumetric_speed = 20 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 + [filament:*PAPG*] inherits = *ABSPG* filament_max_volumetric_speed = 5 @@ -2910,21 +3896,37 @@ bed_temperature = 105 ## idle_temperature = 170 [filament:*PA06PG*] -inherits = *PCPG* +inherits = *PAPG* filament_max_volumetric_speed = 7 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.6 [filament:*PA08PG*] -inherits = *PCPG* +inherits = *PAPG* filament_max_volumetric_speed = 10 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 +[filament:*PAMK4*] +inherits = *ABSMK4* +filament_max_volumetric_speed = 5 +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp\n" +## idle_temperature = 170 + +[filament:*PA06MK4*] +inherits = *PAMK4* +filament_max_volumetric_speed = 7 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[filament:*PA08MK4*] +inherits = *PAMK4* +filament_max_volumetric_speed = 10 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 + [filament:*FLEX*] inherits = *common* bed_temperature = 50 bridge_fan_speed = 80 # For now, all but selected filaments are disabled for the MMU 2.0 -compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) cooling = 0 disable_fan_first_layers = 3 extrusion_multiplier = 1.15 @@ -2945,7 +3947,7 @@ filament_retract_lift = 0 filament_wipe = 0 [filament:*FLEXPG*] -filament_max_volumetric_speed = 4 +filament_max_volumetric_speed = 3.5 filament_retract_speed = 60 filament_deretract_speed = 20 filament_retract_before_travel = 2 @@ -2955,14 +3957,33 @@ start_filament_gcode = "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak tar [filament:*FLEX06PG*] inherits = *FLEXPG* -filament_max_volumetric_speed = 6.5 +filament_max_volumetric_speed = 4.5 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.6 [filament:*FLEX08PG*] inherits = *FLEXPG* -filament_max_volumetric_speed = 9 +filament_max_volumetric_speed = 8 compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 +[filament:*FLEXMK4*] +filament_max_volumetric_speed = 4 +filament_retract_speed = 60 +filament_deretract_speed = 20 +filament_retract_before_travel = 2 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]>=0.3 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 +## idle_temperature = 170 +start_filament_gcode = "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + +[filament:*FLEX06MK4*] +inherits = *FLEXMK4* +filament_max_volumetric_speed = 6.5 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[filament:*FLEX08MK4*] +inherits = *FLEXMK4* +filament_max_volumetric_speed = 9 +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 + [filament:ColorFabb bronzeFill] inherits = *PLA*; *04PLUS* filament_vendor = ColorFabb @@ -3049,12 +4070,27 @@ temperature = 270 inherits = ColorFabb HT; *PETPG* first_layer_bed_temperature = 100 bed_temperature = 105 +compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 [filament:ColorFabb HT @PG 0.6] inherits = ColorFabb HT @PG; *PET06PG* +compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.6 [filament:ColorFabb HT @PG 0.8] inherits = ColorFabb HT @PG; *PET08PG* +compatible_printers_condition = printer_model=="XL" and nozzle_diameter[0]==0.8 + +[filament:ColorFabb HT @MK4] +inherits = ColorFabb HT; *PETPG* +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 + +[filament:ColorFabb HT @MK4 0.6] +inherits = ColorFabb HT @MK4; *PET06PG* +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6 + +[filament:ColorFabb HT @MK4 0.8] +inherits = ColorFabb HT @MK4; *PET08PG* +compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8 [filament:ColorFabb PLA-PHA] inherits = *PLA* @@ -3160,7 +4196,7 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no temperature = 260 filament_retract_length = nil filament_retract_lift = 0.4 -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:ColorFabb XT-CF20 @PG] inherits = ColorFabb XT-CF20; *PETPG*; *04PLUSPG* @@ -3217,19 +4253,32 @@ min_fan_speed = 20 temperature = 260 filament_retract_length = nil filament_retract_lift = 0 -compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and printer_model!="XL" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) [filament:ColorFabb nGen flex @PG] inherits = ColorFabb nGen flex; *FLEXPG* -filament_max_volumetric_speed = 7 +filament_max_volumetric_speed = 6 filament_retract_length = 2.5 [filament:ColorFabb nGen flex @PG 0.6] inherits = ColorFabb nGen flex; *FLEX06PG* -filament_max_volumetric_speed = 9 +filament_max_volumetric_speed = 7 [filament:ColorFabb nGen flex @PG 0.8] inherits = ColorFabb nGen flex; *FLEX08PG* +filament_max_volumetric_speed = 10 + +[filament:ColorFabb nGen flex @MK4] +inherits = ColorFabb nGen flex; *FLEXMK4* +filament_max_volumetric_speed = 7 +filament_retract_length = 2.5 + +[filament:ColorFabb nGen flex @MK4 0.6] +inherits = ColorFabb nGen flex; *FLEX06MK4* +filament_max_volumetric_speed = 9 + +[filament:ColorFabb nGen flex @MK4 0.8] +inherits = ColorFabb nGen flex; *FLEX08MK4* filament_max_volumetric_speed = 12 [filament:Kimya PETG Carbon] @@ -3246,7 +4295,7 @@ temperature = 240 filament_retract_length = nil filament_retract_lift = 0.3 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Kimya PETG Carbon @PG] inherits = Kimya PETG Carbon; *PETPG*; *04PLUSPG* @@ -3268,12 +4317,13 @@ filament_colour = #804040 filament_max_volumetric_speed = 6 first_layer_temperature = 260 temperature = 260 -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Kimya ABS Carbon @PG] inherits = Kimya ABS Carbon; *ABSPG*; *04PLUSPG* bed_temperature = 105 filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="XL" [filament:Kimya ABS Carbon @PG 0.6] inherits = Kimya ABS Carbon @PG; *ABS06PG* @@ -3283,6 +4333,19 @@ filament_max_volumetric_speed = 10 inherits = Kimya ABS Carbon @PG; *ABS08PG* filament_max_volumetric_speed = 14 +[filament:Kimya ABS Carbon @MK4] +inherits = Kimya ABS Carbon; *ABSMK4* +filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="MK4" + +[filament:Kimya ABS Carbon @MK4 0.6] +inherits = Kimya ABS Carbon @MK4; *ABS06MK4* +filament_max_volumetric_speed = 10 + +[filament:Kimya ABS Carbon @MK4 0.8] +inherits = Kimya ABS Carbon @MK4; *ABS08MK4* +filament_max_volumetric_speed = 14 + [filament:Kimya ABS Kevlar] inherits = Kimya ABS Carbon filament_vendor = Kimya @@ -3291,6 +4354,7 @@ filament_density = 1.037 [filament:Kimya ABS Kevlar @PG] inherits = Kimya ABS Kevlar; *ABSPG*; *04PLUSPG* bed_temperature = 105 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="XL" [filament:Kimya ABS Kevlar @PG 0.6] inherits = Kimya ABS Kevlar @PG; *ABS06PG* @@ -3300,6 +4364,18 @@ filament_max_volumetric_speed = 10 inherits = Kimya ABS Kevlar @PG; *ABS08PG* filament_max_volumetric_speed = 14 +[filament:Kimya ABS Kevlar @MK4] +inherits = Kimya ABS Kevlar; *ABSMK4*; *04PLUSPG* +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="MK4" + +[filament:Kimya ABS Kevlar @MK4 0.6] +inherits = Kimya ABS Kevlar @MK4; *ABS06MK4* +filament_max_volumetric_speed = 10 + +[filament:Kimya ABS Kevlar @MK4 0.8] +inherits = Kimya ABS Kevlar @MK4; *ABS08MK4* +filament_max_volumetric_speed = 14 + [filament:Kimya PEBA-S] inherits = *PET* filament_vendor = Kimya @@ -3312,7 +4388,7 @@ filament_max_volumetric_speed = 6.5 filament_type = PEBA min_fan_speed = 30 max_fan_speed = 30 -compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Kimya PEBA-S @PG] inherits = Kimya PEBA-S; *PETPG* @@ -3387,6 +4463,15 @@ inherits = Fillamentum ABS @PG; *ABS06PG* [filament:Fillamentum ABS @PG 0.8] inherits = Fillamentum ABS @PG; *ABS08PG* +[filament:Fillamentum ABS @MK4] +inherits = Fillamentum ABS; *ABSMK4* + +[filament:Fillamentum ABS @MK4 0.6] +inherits = Fillamentum ABS @MK4; *ABS06MK4* + +[filament:Fillamentum ABS @MK4 0.8] +inherits = Fillamentum ABS @MK4; *ABS08MK4* + [filament:Fillamentum ASA] inherits = *ABS* filament_vendor = Fillamentum @@ -3413,6 +4498,15 @@ inherits = Fillamentum ASA @PG; *ABS06PG* [filament:Fillamentum ASA @PG 0.8] inherits = Fillamentum ASA @PG; *ABS08PG* +[filament:Fillamentum ASA @MK4] +inherits = Fillamentum ASA; *ABSMK4* + +[filament:Fillamentum ASA @MK4 0.6] +inherits = Fillamentum ASA @MK4; *ABS06MK4* + +[filament:Fillamentum ASA @MK4 0.8] +inherits = Fillamentum ASA @MK4; *ABS08MK4* + [filament:Prusament ASA] inherits = *ABS* filament_vendor = Prusa Polymers @@ -3434,7 +4528,7 @@ disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament ASA @PG] inherits = Prusament ASA; *ABSPG* @@ -3449,6 +4543,17 @@ inherits = Prusament ASA @PG; *ABS08PG* first_layer_temperature = 265 temperature = 265 +[filament:Prusament ASA @MK4] +inherits = Prusament ASA; *ABSMK4* + +[filament:Prusament ASA @MK4 0.6] +inherits = Prusament ASA @MK4; *ABS06MK4* + +[filament:Prusament ASA @MK4 0.8] +inherits = Prusament ASA @MK4; *ABS08MK4* +first_layer_temperature = 265 +temperature = 265 + [filament:Prusament PC Blend] inherits = *ABS* filament_vendor = Prusa Polymers @@ -3472,7 +4577,7 @@ filament_type = PC filament_colour = #DEE0E6 filament_max_volumetric_speed = 8 filament_retract_lift = 0.2 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Prusament PC Blend @PG] @@ -3487,6 +4592,18 @@ filament_max_volumetric_speed = 13 inherits = Prusament PC Blend @PG; *PC08PG* filament_max_volumetric_speed = 18 +[filament:Prusament PC Blend @MK4] +inherits = Prusament PC Blend; *PCMK4* +filament_max_volumetric_speed = 9 + +[filament:Prusament PC Blend @MK4 0.6] +inherits = Prusament PC Blend @MK4; *PC06MK4* +filament_max_volumetric_speed = 13 + +[filament:Prusament PC Blend @MK4 0.8] +inherits = Prusament PC Blend @MK4; *PC08MK4* +filament_max_volumetric_speed = 18 + [filament:Prusament PC Blend @MK2] inherits = Prusament PC Blend first_layer_bed_temperature = 105 @@ -3506,7 +4623,7 @@ fan_below_layer_time = 10 filament_colour = #BBBBBB filament_retract_length = nil filament_retract_lift = nil -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PC Blend Carbon Fiber @PG] inherits = Prusament PC Blend Carbon Fiber; *PCPG* @@ -3519,6 +4636,17 @@ filament_max_volumetric_speed = 13 inherits = Prusament PC Blend Carbon Fiber; *PC08PG* filament_max_volumetric_speed = 18 +[filament:Prusament PC Blend Carbon Fiber @MK4] +inherits = Prusament PC Blend Carbon Fiber; *PCMK4* + +[filament:Prusament PC Blend Carbon Fiber @MK4 0.6] +inherits = Prusament PC Blend Carbon Fiber; *PC06MK4* +filament_max_volumetric_speed = 13 + +[filament:Prusament PC Blend Carbon Fiber @MK4 0.8] +inherits = Prusament PC Blend Carbon Fiber; *PC08MK4* +filament_max_volumetric_speed = 18 + [filament:Prusament PC Blend Carbon Fiber @MK2] inherits = Prusament PC Blend Carbon Fiber first_layer_bed_temperature = 105 @@ -3539,7 +4667,7 @@ temperature = 285 first_layer_bed_temperature = 90 bed_temperature = 115 fan_below_layer_time = 10 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PA11 Carbon Fiber @PG] inherits = Prusament PA11 Carbon Fiber; *PCPG* @@ -3553,6 +4681,18 @@ filament_max_volumetric_speed = 8 inherits = Prusament PA11 Carbon Fiber @PG; *PC08PG* filament_max_volumetric_speed = 10 +[filament:Prusament PA11 Carbon Fiber @MK4] +inherits = Prusament PA11 Carbon Fiber; *PCMK4* +filament_max_volumetric_speed = 6.5 + +[filament:Prusament PA11 Carbon Fiber @MK4 0.6] +inherits = Prusament PA11 Carbon Fiber @MK4; *PC06MK4* +filament_max_volumetric_speed = 8 + +[filament:Prusament PA11 Carbon Fiber @MK4 0.8] +inherits = Prusament PA11 Carbon Fiber @MK4; *PC08MK4* +filament_max_volumetric_speed = 10 + [filament:Prusament PA11 Carbon Fiber @MK2] inherits = Prusament PA11 Carbon Fiber first_layer_bed_temperature = 90 @@ -3646,7 +4786,7 @@ inherits = *ABSC* filament_vendor = Generic filament_cost = 27.82 filament_density = 1.04 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic ABS @PG] inherits = Generic ABS; *ABSPG* @@ -3660,6 +4800,17 @@ inherits = Generic ABS @PG; *ABS08PG* first_layer_temperature = 265 temperature = 265 +[filament:Generic ABS @MK4] +inherits = Generic ABS; *ABSMK4* + +[filament:Generic ABS @MK4 0.6] +inherits = Generic ABS @MK4; *ABS06MK4* + +[filament:Generic ABS @MK4 0.8] +inherits = Generic ABS @MK4; *ABS08MK4* +first_layer_temperature = 265 +temperature = 265 + [filament:Esun ABS] inherits = *ABSC* filament_vendor = Esun @@ -3677,6 +4828,15 @@ inherits = Esun ABS @PG; *ABS06PG* [filament:Esun ABS @PG 0.8] inherits = Esun ABS @PG; *ABS08PG* +[filament:Esun ABS @MK4] +inherits = Esun ABS; *ABSMK4* + +[filament:Esun ABS @MK4 0.6] +inherits = Esun ABS @MK4; *ABS06MK4* + +[filament:Esun ABS @MK4 0.8] +inherits = Esun ABS @MK4; *ABS08MK4* + [filament:Hatchbox ABS] inherits = *ABSC* filament_vendor = Hatchbox @@ -3694,6 +4854,15 @@ inherits = Hatchbox ABS @PG; *ABS06PG* [filament:Hatchbox ABS @PG 0.8] inherits = Hatchbox ABS @PG; *ABS08PG* +[filament:Hatchbox ABS @MK4] +inherits = Hatchbox ABS; *ABSMK4* + +[filament:Hatchbox ABS @MK4 0.6] +inherits = Hatchbox ABS @MK4; *ABS06MK4* + +[filament:Hatchbox ABS @MK4 0.8] +inherits = Hatchbox ABS @MK4; *ABS08MK4* + [filament:Filament PM ABS] inherits = *ABSC* renamed_from = "Plasty Mladec ABS" @@ -3712,6 +4881,15 @@ inherits = Filament PM ABS @PG; *ABS06PG* [filament:Filament PM ABS @PG 0.8] inherits = Filament PM ABS @PG; *ABS08PG* +[filament:Filament PM ABS @MK4] +inherits = Filament PM ABS; *ABSMK4* + +[filament:Filament PM ABS @MK4 0.6] +inherits = Filament PM ABS @MK4; *ABS06MK4* + +[filament:Filament PM ABS @MK4 0.8] +inherits = Filament PM ABS @MK4; *ABS08MK4* + [filament:Verbatim ABS] inherits = *ABSC* filament_vendor = Verbatim @@ -3730,13 +4908,22 @@ inherits = Verbatim ABS @PG; *ABS06PG* [filament:Verbatim ABS @PG 0.8] inherits = Verbatim ABS @PG; *ABS08PG* +[filament:Verbatim ABS @MK4] +inherits = Verbatim ABS; *ABSMK4* + +[filament:Verbatim ABS @MK4 0.6] +inherits = Verbatim ABS @MK4; *ABS06MK4* + +[filament:Verbatim ABS @MK4 0.8] +inherits = Verbatim ABS @MK4; *ABS08MK4* + [filament:Generic PETG] inherits = *PET* renamed_from = "Generic PET" filament_vendor = Generic filament_cost = 27.82 filament_density = 1.27 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic PETG @PG] inherits = Generic PETG; *PETPG* @@ -3766,12 +4953,15 @@ filament_spool_weight = 230 [filament:Extrudr DuraPro ASA @PG] inherits = Extrudr DuraPro ASA; *ABSPG* filament_max_volumetric_speed = 10 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Extrudr DuraPro ASA @PG 0.6] inherits = Extrudr DuraPro ASA @PG; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Extrudr DuraPro ASA @PG 0.8] inherits = Extrudr DuraPro ASA @PG; *ABS08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Extrudr PETG] inherits = *PET* @@ -3809,7 +4999,7 @@ filament_density = 1.29 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198" first_layer_temperature = 235 temperature = 235 -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_spool_weight = 230 [filament:Extrudr XPETG CF @PG] @@ -4030,6 +5220,17 @@ inherits = Extrudr Flex Hard @PG; *FLEX06PG* [filament:Extrudr Flex Hard @PG 0.8] inherits = Extrudr Flex Hard @PG; *FLEX08PG* +[filament:Extrudr Flex Hard @MK4] +inherits = Extrudr Flex Hard; *FLEXMK4* +extrusion_multiplier = 1.1 +filament_retract_length = 2.5 + +[filament:Extrudr Flex Hard @MK4 0.6] +inherits = Extrudr Flex Hard @MK4; *FLEX06MK4* + +[filament:Extrudr Flex Hard @MK4 0.8] +inherits = Extrudr Flex Hard @MK4; *FLEX08MK4* + [filament:Extrudr Flex Medium] inherits = *FLEX* filament_vendor = Extrudr @@ -4056,6 +5257,17 @@ inherits = Extrudr Flex Medium @PG; *FLEX06PG* [filament:Extrudr Flex Medium @PG 0.8] inherits = Extrudr Flex Medium @PG; *FLEX08PG* +[filament:Extrudr Flex Medium @MK4] +inherits = Extrudr Flex Medium; *FLEXMK4* +extrusion_multiplier = 1.1 +filament_retract_length = 2.5 + +[filament:Extrudr Flex Medium @MK4 0.6] +inherits = Extrudr Flex Medium @MK4; *FLEX06MK4* + +[filament:Extrudr Flex Medium @MK4 0.8] +inherits = Extrudr Flex Medium @MK4; *FLEX08MK4* + [filament:Extrudr Flex SemiSoft] inherits = *FLEX* filament_vendor = Extrudr @@ -4085,6 +5297,20 @@ filament_max_volumetric_speed = 5 inherits = Extrudr Flex SemiSoft @PG; *FLEX08PG* filament_max_volumetric_speed = 8 +[filament:Extrudr Flex SemiSoft @MK4] +inherits = Extrudr Flex SemiSoft; *FLEXMK4* +extrusion_multiplier = 1.1 +filament_retract_length = 3 +filament_max_volumetric_speed = 3 + +[filament:Extrudr Flex SemiSoft @MK4 0.6] +inherits = Extrudr Flex SemiSoft @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 5 + +[filament:Extrudr Flex SemiSoft @MK4 0.8] +inherits = Extrudr Flex SemiSoft @MK4; *FLEX08MK4* +filament_max_volumetric_speed = 8 + [filament:addnorth Adamant S1] inherits = *FLEX* filament_vendor = addnorth @@ -4121,12 +5347,27 @@ filament_retract_lift = 0.2 [filament:addnorth Adamant S1 @PG 0.6] inherits = addnorth Adamant S1 @PG; *FLEX06PG* -filament_max_volumetric_speed = 5.5 +filament_max_volumetric_speed = 4.5 [filament:addnorth Adamant S1 @PG 0.8] inherits = addnorth Adamant S1 @PG; *FLEX08PG* filament_max_volumetric_speed = 9 +[filament:addnorth Adamant S1 @MK4] +inherits = addnorth Adamant S1; *FLEXMK4* +filament_max_volumetric_speed = 3 +filament_retract_length = 1.5 +filament_retract_restart_extra = 0 +filament_retract_lift = 0.2 + +[filament:addnorth Adamant S1 @MK4 0.6] +inherits = addnorth Adamant S1 @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 5.5 + +[filament:addnorth Adamant S1 @MK4 0.8] +inherits = addnorth Adamant S1 @MK4; *FLEX08MK4* +filament_max_volumetric_speed = 9 + [filament:addnorth Adura X] inherits = *PET* filament_vendor = addnorth @@ -4152,21 +5393,39 @@ filament_retract_lift = 0.4 filament_max_volumetric_speed = 4 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" filament_spool_weight = 0 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="XL" and printer_model!="MK2SMM" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and printer_model!="MK2SMM" and ! single_extruder_multi_material [filament:addnorth Adura X @PG] inherits = addnorth Adura X; *PETPG* first_layer_bed_temperature = 100 bed_temperature = 105 filament_max_volumetric_speed = 4 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="XL" and ! single_extruder_multi_material [filament:addnorth Adura X @PG 0.6] inherits = addnorth Adura X @PG; *PET06PG* filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model=="XL" and ! single_extruder_multi_material [filament:addnorth Adura X @PG 0.8] inherits = addnorth Adura X @PG; *PET08PG* filament_max_volumetric_speed = 8 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="XL" and ! single_extruder_multi_material + +[filament:addnorth Adura X @MK4] +inherits = addnorth Adura X; *PETPG* +filament_max_volumetric_speed = 4 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="MK4" and ! single_extruder_multi_material + +[filament:addnorth Adura X @MK4 0.6] +inherits = addnorth Adura X @MK4; *PET06PG* +filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model=="MK4" and ! single_extruder_multi_material + +[filament:addnorth Adura X @MK4 0.8] +inherits = addnorth Adura X @MK4; *PET08PG* +filament_max_volumetric_speed = 8 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MK4" and ! single_extruder_multi_material [filament:addnorth Adura X @MINI] inherits = addnorth Adura X @@ -4305,6 +5564,19 @@ filament_max_volumetric_speed = 6 inherits = addnorth OBC Polyethylene @PG; *FLEX08PG* filament_max_volumetric_speed = 10 +[filament:addnorth OBC Polyethylene @MK4] +inherits = addnorth OBC Polyethylene; *FLEXMK4* +filament_max_volumetric_speed = 4 +filament_retract_length = 1.5 + +[filament:addnorth OBC Polyethylene @MK4 0.6] +inherits = addnorth OBC Polyethylene @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6 + +[filament:addnorth OBC Polyethylene @MK4 0.8] +inherits = addnorth OBC Polyethylene @MK4; *FLEX08MK4* +filament_max_volumetric_speed = 10 + [filament:addnorth PETG] inherits = *PET* filament_vendor = addnorth @@ -4375,7 +5647,7 @@ filament_retract_length = 1.4 filament_max_volumetric_speed = 5 filament_spool_weight = 0 filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel." -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="XL" and printer_model!="MK2SMM" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and printer_model!="MK2SMM" and ! single_extruder_multi_material [filament:addnorth Rigid X @PG] inherits = addnorth Rigid X; *PETPG*; *04PLUSPG* @@ -4421,7 +5693,7 @@ slowdown_below_layer_time = 15 min_print_speed = 20 filament_spool_weight = 0 filament_retract_length = 1 -compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:addnorth Textura @PG] inherits = addnorth Textura; *PLAPG* @@ -4458,19 +5730,22 @@ disable_fan_first_layers = 3 fan_below_layer_time = 60 slowdown_below_layer_time = 15 bridge_fan_speed = 20 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Filamentworld ABS @PG] inherits = Filamentworld ABS; *ABSPG* first_layer_bed_temperature = 100 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filamentworld ABS @PG 0.6] inherits = Filamentworld ABS @PG; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filamentworld ABS @PG 0.8] inherits = Filamentworld ABS @PG; *ABS08PG* first_layer_temperature = 240 temperature = 240 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filamentworld ABS @MINI] inherits = Filamentworld ABS @@ -4552,7 +5827,7 @@ filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 -compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Filament PM PETG @PG] inherits = Filament PM PETG; *PETPG* @@ -4568,7 +5843,7 @@ inherits = *PLA* filament_vendor = Generic filament_cost = 25.4 filament_density = 1.24 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic PLA @PG] inherits = Generic PLA; *PLAPG* @@ -4707,6 +5982,15 @@ inherits = 3D-Fuel Workday ABS @PG; *ABS06PG* [filament:3D-Fuel Workday ABS @PG 0.8] inherits = 3D-Fuel Workday ABS @PG; *ABS08PG* +[filament:3D-Fuel Workday ABS @MK4] +inherits = 3D-Fuel Workday ABS; *ABSMK4* + +[filament:3D-Fuel Workday ABS @MK4 0.6] +inherits = 3D-Fuel Workday ABS @MK4; *ABS06MK4* + +[filament:3D-Fuel Workday ABS @MK4 0.8] +inherits = 3D-Fuel Workday ABS @MK4; *ABS08MK4* + [filament:3D-Fuel Workday ABS @MINI] inherits = 3D-Fuel Workday ABS; *ABSMINI* @@ -4817,7 +6101,7 @@ filament_max_volumetric_speed = 1.2 filament_retract_length = 0 filament_retract_speed = nil filament_retract_lift = nil -compatible_printers_condition = nozzle_diameter[0]>=0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic FLEX @PG] inherits = Generic FLEX; *FLEXPG* @@ -4835,10 +6119,32 @@ extrusion_multiplier = 1.08 [filament:Generic FLEX @PG 0.6] inherits = Generic FLEX @PG; *FLEX06PG* -filament_max_volumetric_speed = 6 +filament_max_volumetric_speed = 4 [filament:Generic FLEX @PG 0.8] inherits = Generic FLEX @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Generic FLEX @MK4] +inherits = Generic FLEX; *FLEXMK4* +filament_max_volumetric_speed = 3 +filament_retract_length = 2.5 +fan_always_on = 1 +min_fan_speed = 30 +max_fan_speed = 30 +cooling = 1 +filament_retract_lift = 0 +slowdown_below_layer_time = 10 +first_layer_temperature = 230 +temperature = 230 +extrusion_multiplier = 1.08 + +[filament:Generic FLEX @MK4 0.6] +inherits = Generic FLEX @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6 + +[filament:Generic FLEX @MK4 0.8] +inherits = Generic FLEX @MK4; *FLEX08MK4* filament_max_volumetric_speed = 9 [filament:Fillamentum Flexfill 92A] @@ -4860,16 +6166,30 @@ full_fan_speed_layer = 6 [filament:Fillamentum Flexfill 92A @PG] inherits = Fillamentum Flexfill 92A; *FLEXPG* -filament_max_volumetric_speed = 3.5 +filament_max_volumetric_speed = 3 extrusion_multiplier = 1.1 filament_retract_length = 3.5 [filament:Fillamentum Flexfill 92A @PG 0.6] inherits = Fillamentum Flexfill 92A @PG; *FLEX06PG* -filament_max_volumetric_speed = 6.5 +filament_max_volumetric_speed = 4.5 [filament:Fillamentum Flexfill 92A @PG 0.8] inherits = Fillamentum Flexfill 92A @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Fillamentum Flexfill 92A @MK4] +inherits = Fillamentum Flexfill 92A; *FLEXMK4* +filament_max_volumetric_speed = 3.5 +extrusion_multiplier = 1.1 +filament_retract_length = 3.5 + +[filament:Fillamentum Flexfill 92A @MK4 0.6] +inherits = Fillamentum Flexfill 92A @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6.5 + +[filament:Fillamentum Flexfill 92A @MK4 0.8] +inherits = Fillamentum Flexfill 92A @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:AmazonBasics TPU] @@ -4906,10 +6226,23 @@ extrusion_multiplier = 1.1 [filament:AmazonBasics TPU @PG 0.6] inherits = AmazonBasics TPU @PG; *FLEX06PG* -filament_max_volumetric_speed = 6.5 +filament_max_volumetric_speed = 5 [filament:AmazonBasics TPU @PG 0.8] inherits = AmazonBasics TPU @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:AmazonBasics TPU @MK4] +inherits = AmazonBasics TPU; *FLEXMK4* +filament_retract_length = 2.5 +extrusion_multiplier = 1.1 + +[filament:AmazonBasics TPU @MK4 0.6] +inherits = AmazonBasics TPU @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6.5 + +[filament:AmazonBasics TPU @MK4 0.8] +inherits = AmazonBasics TPU @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:SainSmart TPU] @@ -4948,10 +6281,25 @@ filament_retract_length = 1.5 [filament:SainSmart TPU @PG 0.6] inherits = SainSmart TPU @PG; *FLEX06PG* -filament_max_volumetric_speed = 7 +filament_max_volumetric_speed = 6 [filament:SainSmart TPU @PG 0.8] inherits = SainSmart TPU @PG; *FLEX08PG* +filament_max_volumetric_speed = 9 + +[filament:SainSmart TPU @MK4] +inherits = SainSmart TPU; *FLEXMK4* +filament_max_volumetric_speed = 5 +first_layer_temperature = 235 +temperature = 235 +filament_retract_length = 1.5 + +[filament:SainSmart TPU @MK4 0.6] +inherits = SainSmart TPU @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 7 + +[filament:SainSmart TPU @MK4 0.8] +inherits = SainSmart TPU @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:NinjaTek NinjaFlex TPU] @@ -4983,16 +6331,30 @@ cooling = 1 [filament:NinjaTek NinjaFlex TPU @PG] inherits = NinjaTek NinjaFlex TPU; *FLEXPG* -filament_max_volumetric_speed = 3.5 +filament_max_volumetric_speed = 3 filament_retract_length = 3.5 extrusion_multiplier = 1.12 [filament:NinjaTek NinjaFlex TPU @PG 0.6] inherits = NinjaTek NinjaFlex TPU @PG; *FLEX06PG* -filament_max_volumetric_speed = 6.5 +filament_max_volumetric_speed = 4.5 [filament:NinjaTek NinjaFlex TPU @PG 0.8] inherits = NinjaTek NinjaFlex TPU @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:NinjaTek NinjaFlex TPU @MK4] +inherits = NinjaTek NinjaFlex TPU; *FLEXMK4* +filament_max_volumetric_speed = 3.5 +filament_retract_length = 3.5 +extrusion_multiplier = 1.12 + +[filament:NinjaTek NinjaFlex TPU @MK4 0.6] +inherits = NinjaTek NinjaFlex TPU @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6.5 + +[filament:NinjaTek NinjaFlex TPU @MK4 0.8] +inherits = NinjaTek NinjaFlex TPU @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:NinjaTek Cheetah TPU] @@ -5008,15 +6370,28 @@ temperature = 240 [filament:NinjaTek Cheetah TPU @PG] inherits = NinjaTek Cheetah TPU; *FLEXPG* -filament_max_volumetric_speed = 6 +filament_max_volumetric_speed = 5 filament_retract_length = 2.2 [filament:NinjaTek Cheetah TPU @PG 0.6] inherits = NinjaTek Cheetah TPU @PG; *FLEX06PG* -filament_max_volumetric_speed = 8 +filament_max_volumetric_speed = 7 [filament:NinjaTek Cheetah TPU @PG 0.8] inherits = NinjaTek Cheetah TPU @PG; *FLEX08PG* +filament_max_volumetric_speed = 10 + +[filament:NinjaTek Cheetah TPU @MK4] +inherits = NinjaTek Cheetah TPU; *FLEXMK4* +filament_max_volumetric_speed = 6 +filament_retract_length = 2.2 + +[filament:NinjaTek Cheetah TPU @MK4 0.6] +inherits = NinjaTek Cheetah TPU @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 8 + +[filament:NinjaTek Cheetah TPU @MK4 0.8] +inherits = NinjaTek Cheetah TPU @MK4; *FLEX08MK4* filament_max_volumetric_speed = 12 [filament:NinjaTek Cheetah TPU @MINI] @@ -5070,6 +6445,19 @@ filament_max_volumetric_speed = 5 inherits = Filatech FilaFlex40 @PG; *FLEX08PG* filament_max_volumetric_speed = 10 +[filament:Filatech FilaFlex40 @MK4] +inherits = Filatech FilaFlex40; *FLEXMK4* +filament_max_volumetric_speed = 4 +filament_retract_length = 2.5 + +[filament:Filatech FilaFlex40 @MK4 0.6] +inherits = Filatech FilaFlex40 @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 5 + +[filament:Filatech FilaFlex40 @MK4 0.8] +inherits = Filatech FilaFlex40 @MK4; *FLEX08MK4* +filament_max_volumetric_speed = 10 + [filament:Filatech FilaFlex30] inherits = Filatech FilaFlex40 temperature = 225 @@ -5084,10 +6472,23 @@ filament_retract_length = 3 [filament:Filatech FilaFlex30 @PG 0.6] inherits = Filatech FilaFlex30 @PG; *FLEX06PG* -filament_max_volumetric_speed = 7 +filament_max_volumetric_speed = 5 [filament:Filatech FilaFlex30 @PG 0.8] inherits = Filatech FilaFlex30 @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Filatech FilaFlex30 @MK4] +inherits = Filatech FilaFlex30; *FLEXMK4* +filament_max_volumetric_speed = 3.5 +filament_retract_length = 3 + +[filament:Filatech FilaFlex30 @MK4 0.6] +inherits = Filatech FilaFlex30 @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 7 + +[filament:Filatech FilaFlex30 @MK4 0.8] +inherits = Filatech FilaFlex30 @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:Filatech FilaFlex55] @@ -5132,16 +6533,30 @@ temperature = 235 [filament:Filatech TPU @PG] inherits = Filatech TPU; *FLEXPG* -filament_max_volumetric_speed = 5.5 +filament_max_volumetric_speed = 4.5 first_layer_temperature = 235 filament_retract_length = 2.2 [filament:Filatech TPU @PG 0.6] inherits = Filatech TPU @PG; *FLEX06PG* -filament_max_volumetric_speed = 7 +filament_max_volumetric_speed = 5 [filament:Filatech TPU @PG 0.8] inherits = Filatech TPU @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Filatech TPU @MK4] +inherits = Filatech TPU; *FLEXMK4* +filament_max_volumetric_speed = 5.5 +first_layer_temperature = 235 +filament_retract_length = 2.2 + +[filament:Filatech TPU @MK4 0.6] +inherits = Filatech TPU @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 7 + +[filament:Filatech TPU @MK4 0.8] +inherits = Filatech TPU @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:Filatech ABS] @@ -5161,6 +6576,15 @@ inherits = Filatech ABS @PG; *ABS06PG* [filament:Filatech ABS @PG 0.8] inherits = Filatech ABS @PG; *ABS08PG* +[filament:Filatech ABS @MK4] +inherits = Filatech ABS; *ABSMK4* + +[filament:Filatech ABS @MK4 0.6] +inherits = Filatech ABS @MK4; *ABS06MK4* + +[filament:Filatech ABS @MK4 0.8] +inherits = Filatech ABS @MK4; *ABS08MK4* + [filament:Filatech ABS @MINI] inherits = Filatech ABS; *ABSMINI* @@ -5172,17 +6596,20 @@ extrusion_multiplier = 0.95 filament_density = 1.1 first_layer_bed_temperature = 105 bed_temperature = 100 -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech FilaCarbon @PG] inherits = Filatech FilaCarbon; *ABSPG*; *04PLUSPG* first_layer_bed_temperature = 100 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech FilaCarbon @PG 0.6] inherits = Filatech FilaCarbon @PG; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech FilaCarbon @PG 0.8] inherits = Filatech FilaCarbon @PG; *ABS08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech FilaCarbon @MINI] inherits = Filatech FilaCarbon; *ABSMINI* @@ -5251,12 +6678,15 @@ cooling = 0 [filament:Filatech FilaTough @PG] inherits = Filatech FilaTough; *ABSPG* +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech FilaTough @PG 0.6] inherits = Filatech FilaTough; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech FilaTough @PG 0.8] inherits = Filatech FilaTough; *ABS08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech HIPS] inherits = Prusa HIPS @@ -5268,7 +6698,7 @@ first_layer_temperature = 230 first_layer_bed_temperature = 100 temperature = 225 bed_temperature = 110 -compatible_printers_condition = printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech HIPS @PG] inherits = Filatech HIPS; *ABSPG* @@ -5290,6 +6720,24 @@ inherits = Filatech HIPS @PG; *ABS06PG* [filament:Filatech HIPS @PG 0.8] inherits = Filatech HIPS @PG; *ABS08PG* +[filament:Filatech HIPS @MK4] +inherits = Filatech HIPS; *ABSMK4* +bridge_fan_speed = 50 +cooling = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 10 +first_layer_temperature = 220 +temperature = 225 +max_fan_speed = 20 +min_fan_speed = 20 + +[filament:Filatech HIPS @MK4 0.6] +inherits = Filatech HIPS @MK4; *ABS06MK4* + +[filament:Filatech HIPS @MK4 0.8] +inherits = Filatech HIPS @MK4; *ABS08MK4* + [filament:Filatech HIPS @MINI] inherits = Filatech HIPS; *ABSMINI* @@ -5307,7 +6755,7 @@ cooling = 0 bridge_fan_speed = 25 filament_type = PA filament_max_volumetric_speed = 8 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Filatech PA @PG] inherits = Filatech PA; *ABSPG* @@ -5323,6 +6771,18 @@ filament_max_volumetric_speed = 10 inherits = Filatech PA @PG; *ABS08PG* filament_max_volumetric_speed = 12 +[filament:Filatech PA @MK4] +inherits = Filatech PA; *ABSMK4* +filament_max_volumetric_speed = 8 + +[filament:Filatech PA @MK4 0.6] +inherits = Filatech PA @MK4; *ABS06MK4* +filament_max_volumetric_speed = 10 + +[filament:Filatech PA @MK4 0.8] +inherits = Filatech PA @MK4; *ABS08MK4* +filament_max_volumetric_speed = 12 + [filament:Filatech PA @MK2] inherits = Filatech PA first_layer_bed_temperature = 105 @@ -5351,6 +6811,15 @@ inherits = Filatech PC @PG; *PC06PG* [filament:Filatech PC @PG 0.8] inherits = Filatech PC @PG; *PC08PG* +[filament:Filatech PC @MK4] +inherits = Filatech PC; *PCMK4* + +[filament:Filatech PC @MK4 0.6] +inherits = Filatech PC @MK4; *PC06MK4* + +[filament:Filatech PC @MK4 0.8] +inherits = Filatech PC @MK4; *PC08MK4* + [filament:Filatech PC @MK2] inherits = Filatech PC first_layer_bed_temperature = 105 @@ -5379,6 +6848,15 @@ inherits = Filatech PC-ABS; *PC06PG* [filament:Filatech PC-ABS @PG 0.8] inherits = Filatech PC-ABS; *PC08PG* +[filament:Filatech PC-ABS @MK4] +inherits = Filatech PC-ABS; *PCMK4* + +[filament:Filatech PC-ABS @MK4 0.6] +inherits = Filatech PC-ABS @MK4; *PC06MK4* + +[filament:Filatech PC-ABS @MK4 0.8] +inherits = Filatech PC-ABS @MK4; *PC08MK4* + [filament:Filatech PC-ABS @MK2] inherits = Filatech PC-ABS first_layer_bed_temperature = 105 @@ -5474,7 +6952,7 @@ filament_retract_lift = 0 filament_retract_speed = 40 filament_retract_before_travel = 2 filament_retract_layer_change = 0 -compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PRO1 @PG] inherits = Ultrafuse PRO1; *PLAPG* @@ -5519,6 +6997,15 @@ inherits = Ultrafuse ABS @PG; *ABS06PG* [filament:Ultrafuse ABS @PG 0.8] inherits = Ultrafuse ABS @PG; *ABS08PG* +[filament:Ultrafuse ABS @MK4] +inherits = Ultrafuse ABS; *ABSMK4* + +[filament:Ultrafuse ABS @MK4 0.6] +inherits = Ultrafuse ABS @MK4; *ABS06MK4* + +[filament:Ultrafuse ABS @MK4 0.8] +inherits = Ultrafuse ABS @MK4; *ABS08MK4* + [filament:Ultrafuse ABS @MINI] inherits = Ultrafuse ABS; *ABSMINI* filament_retract_layer_change = nil @@ -5547,6 +7034,15 @@ inherits = Ultrafuse ABS Fusion+ @PG; *ABS06PG* [filament:Ultrafuse ABS Fusion+ @PG 0.8] inherits = Ultrafuse ABS Fusion+ @PG; *ABS08PG* +[filament:Ultrafuse ABS Fusion+ @MK4] +inherits = Ultrafuse ABS Fusion+; *ABSMK4* + +[filament:Ultrafuse ABS Fusion+ @MK4 0.6] +inherits = Ultrafuse ABS Fusion+ @MK4; *ABS06MK4* + +[filament:Ultrafuse ABS Fusion+ @MK4 0.8] +inherits = Ultrafuse ABS Fusion+ @MK4; *ABS08MK4* + [filament:Ultrafuse ABS Fusion+ @MINI] inherits = Ultrafuse ABS Fusion+; *ABSMINI* first_layer_bed_temperature = 100 @@ -5582,6 +7078,18 @@ filament_max_volumetric_speed = 9 inherits = Ultrafuse ASA @PG; *ABS08PG* filament_max_volumetric_speed = 12 +[filament:Ultrafuse ASA @MK4] +inherits = Ultrafuse ASA; *ABSMK4* +filament_max_volumetric_speed = 5 + +[filament:Ultrafuse ASA @MK4 0.6] +inherits = Ultrafuse ASA @MK4; *ABS06MK4* +filament_max_volumetric_speed = 9 + +[filament:Ultrafuse ASA @MK4 0.8] +inherits = Ultrafuse ASA @MK4; *ABS08MK4* +filament_max_volumetric_speed = 12 + [filament:Ultrafuse ASA @MINI] inherits = Ultrafuse ASA; *ABSMINI* filament_type = ASA @@ -5607,6 +7115,15 @@ inherits = Ultrafuse HIPS @PG; *ABS06PG* [filament:Ultrafuse HIPS @PG 0.8] inherits = Ultrafuse HIPS @PG; *ABS08PG* +[filament:Ultrafuse HIPS @MK4] +inherits = Ultrafuse HIPS; *ABSMK4* + +[filament:Ultrafuse HIPS @MK4 0.6] +inherits = Ultrafuse HIPS @MK4; *ABS06MK4* + +[filament:Ultrafuse HIPS @MK4 0.8] +inherits = Ultrafuse HIPS @MK4; *ABS08MK4* + [filament:Ultrafuse HIPS @MINI] inherits = Ultrafuse HIPS; *ABSMINI* filament_type = HIPS @@ -5635,21 +7152,24 @@ filament_retract_before_travel = 2 filament_retract_layer_change = 0 filament_cost = 0 filament_spool_weight = 0 -compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" filament_notes = "Material Description\nThe key features of Ultrafuse PA are the high strength and high modulus. Furthermore, Ultrafuse PA shows a good thermal distortion stability.\n\nPrinting Recommendations:\nApply PVA glue, Kapton tape or PA adhesive to a clean buildplate to improve adhesion." [filament:Ultrafuse PA @PG] inherits = Ultrafuse PA; *ABSPG* filament_max_volumetric_speed = 8 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PA @PG 0.6] inherits = Ultrafuse PA @PG; *ABS06PG* filament_max_volumetric_speed = 10 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PA @PG 0.8] inherits = Ultrafuse PA @PG; *ABS08PG* filament_max_volumetric_speed = 12 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PA6 GF30] inherits = Ultrafuse PA @@ -5673,17 +7193,19 @@ filament_deretract_speed = 30 filament_retract_lift = nil filament_wipe = 0 filament_notes = "Material Description\nUltrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.\n\nWith its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.\n\nUltrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PA6 GF30 can be printed directly onto a clean build plate. For challenging prints, use Magigoo PA gluestick to improve adhesion." -compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PA6 GF30 @PG 0.6] inherits = Ultrafuse PA6 GF30; *ABS06PG* filament_max_volumetric_speed = 10 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PA6 GF30 @PG 0.8] inherits = Ultrafuse PA6 GF30; *ABS08PG* filament_max_volumetric_speed = 14 first_layer_temperature = 275 temperature = 275 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PAHT-CF15] inherits = Ultrafuse PA6 GF30 @@ -5692,9 +7214,11 @@ filament_notes = "Material Description\nPAHT CF15 is a high-performance 3D print [filament:Ultrafuse PAHT-CF15 @PG 0.6] inherits = Ultrafuse PAHT-CF15; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PAHT-CF15 @PG 0.8] inherits = Ultrafuse PAHT-CF15; *ABS08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PC-ABS-FR] inherits = Ultrafuse ABS @@ -5711,7 +7235,7 @@ min_fan_speed = 20 max_fan_speed = 20 bridge_fan_speed = 30 disable_fan_first_layers = 4 -compatible_printers_condition = printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material filament_notes = "Material Description\nUltrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications. The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS. Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.\n\nPrinting Recommendations:\nApply Magigoo PC to a clean build plate to improve adhesion." start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" @@ -5729,6 +7253,18 @@ filament_max_volumetric_speed = 10 inherits = Ultrafuse PC-ABS-FR @PG; *ABS08PG* filament_max_volumetric_speed = 12 +[filament:Ultrafuse PC-ABS-FR @MK4] +inherits = Ultrafuse PC-ABS-FR; *ABSMK4* +filament_max_volumetric_speed = 8 + +[filament:Ultrafuse PC-ABS-FR @MK4 0.6] +inherits = Ultrafuse PC-ABS-FR @MK4; *ABS06MK4* +filament_max_volumetric_speed = 10 + +[filament:Ultrafuse PC-ABS-FR @MK4 0.8] +inherits = Ultrafuse PC-ABS-FR @MK4; *ABS08MK4* +filament_max_volumetric_speed = 12 + [filament:Ultrafuse PET-CF15] inherits = Ultrafuse PET filament_density = 1.36 @@ -5752,7 +7288,7 @@ filament_retract_lift = nil filament_wipe = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" filament_notes = "Material Description\nPET CF15 is a Carbon Fiber reinforced PET which has precisely tuned material properties, for a wide range of technical applications. The filament is very strong and stiff and has high heat resistance. With its high dimensional stability and low abrasiveness, the filament offers an easy to print experience which allows direct printing on glass or a PEI sheet. It is compatible with HiPS for breakaway support and water soluble support and has an excellent surface finish.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PET-CF15 can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion." -compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PET-CF15 @PG 0.6] inherits = Ultrafuse PET; *PET06PG* @@ -5803,19 +7339,22 @@ filament_deretract_speed = 25 filament_retract_layer_change = 0 filament_wipe = nil filament_notes = "Material Description\nUltrafuse PP is high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties make it an ideal material for 3D-printing applications which have to endure high stress or strain. The filament has high chemical resistance and a high isolation value. PP is one of the most used materials in the world, due to its versatility and ability to engineer lightweight tough parts.\n\nPrinting Recommendations:\nApply PP tape or Magigoo PP adhesive to the buildplate for optimal adhesion." -compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PP @PG] inherits = Ultrafuse PP; *ABSPG* filament_max_volumetric_speed = 2.5 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PP @PG 0.6] inherits = Ultrafuse PP @PG; *ABS06PG* filament_max_volumetric_speed = 4 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PP @PG 0.8] inherits = Ultrafuse PP @PG; *ABS08PG* filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PP-GF30] inherits = Ultrafuse PP @@ -5837,13 +7376,15 @@ filament_deretract_speed = 30 filament_retract_lift = nil filament_wipe = 0 filament_notes = "Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PPGF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nApply PP strapping tape or PPGF adhesive to a clean build plate for optimal adhesion." -compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PP-GF30 @PG 0.6] inherits = Ultrafuse PP; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse PP-GF30 @PG 0.8] inherits = Ultrafuse PP; *ABS08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse TPC-45D] inherits = *FLEX* @@ -5934,10 +7475,26 @@ filament_retract_length = 3.5 [filament:Ultrafuse TPU-85A @PG 0.6] inherits = Ultrafuse TPU-85A @PG; *FLEX06PG* -filament_max_volumetric_speed = 6 +filament_max_volumetric_speed = 4 [filament:Ultrafuse TPU-85A @PG 0.8] inherits = Ultrafuse TPU-85A @PG; *FLEX08PG* +filament_max_volumetric_speed = 7 + +[filament:Ultrafuse TPU-85A @MK4] +inherits = Ultrafuse TPU-85A; *FLEXMK4* +filament_max_volumetric_speed = 3 +extrusion_multiplier = 1.1 +first_layer_temperature = 220 +temperature = 215 +filament_retract_length = 3.5 + +[filament:Ultrafuse TPU-85A @MK4 0.6] +inherits = Ultrafuse TPU-85A @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6 + +[filament:Ultrafuse TPU-85A @MK4 0.8] +inherits = Ultrafuse TPU-85A @MK4; *FLEX08MK4* filament_max_volumetric_speed = 8 [filament:Ultrafuse TPU-95A] @@ -5954,10 +7511,23 @@ filament_retract_length = 3 [filament:Ultrafuse TPU-95A @PG 0.6] inherits = Ultrafuse TPU-95A @PG; *FLEX06PG* -filament_max_volumetric_speed = 5 +filament_max_volumetric_speed = 3.5 [filament:Ultrafuse TPU-95A @PG 0.8] inherits = Ultrafuse TPU-95A @PG; *FLEX08PG* +filament_max_volumetric_speed = 6 + +[filament:Ultrafuse TPU-95A @MK4] +inherits = Ultrafuse TPU-95A; *FLEXMK4* +filament_max_volumetric_speed = 2.5 +filament_retract_length = 3 + +[filament:Ultrafuse TPU-95A @MK4 0.6] +inherits = Ultrafuse TPU-95A @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 5 + +[filament:Ultrafuse TPU-95A @MK4 0.8] +inherits = Ultrafuse TPU-95A @MK4; *FLEX08MK4* filament_max_volumetric_speed = 7 [filament:Ultrafuse rPET] @@ -6008,7 +7578,7 @@ cooling = 0 fan_always_on = 0 filament_max_volumetric_speed = 4 filament_type = METAL -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material start_filament_gcode = "M900 K0" filament_colour = #FFFFFF @@ -6016,11 +7586,13 @@ filament_colour = #FFFFFF inherits = Ultrafuse Metal; *ABSPG*; *04PLUSPG* filament_max_volumetric_speed = 4 start_filament_gcode = "M900 K0" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Ultrafuse Metal @PG 0.6] inherits = Ultrafuse Metal @PG; *ABS06PG* filament_max_volumetric_speed = 4 start_filament_gcode = "M900 K0" +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Polymaker PC-Max] inherits = *ABS* @@ -6050,6 +7622,18 @@ filament_max_volumetric_speed = 12 inherits = Polymaker PC-Max @PG; *ABS08PG* filament_max_volumetric_speed = 15 +[filament:Polymaker PC-Max @MK4] +inherits = Polymaker PC-Max; *ABSMK4* +filament_max_volumetric_speed = 8 + +[filament:Polymaker PC-Max @MK4 0.6] +inherits = Polymaker PC-Max @MK4; *ABS06MK4* +filament_max_volumetric_speed = 12 + +[filament:Polymaker PC-Max @MK4 0.8] +inherits = Polymaker PC-Max @MK4; *ABS08MK4* +filament_max_volumetric_speed = 15 + [filament:PrimaSelect PVA+] inherits = *PLA* filament_vendor = PrimaSelect @@ -6086,7 +7670,7 @@ filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.08 filament_spool_weight = 230 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusa ABS @PG] inherits = Prusa ABS; *ABSPG* @@ -6100,6 +7684,17 @@ inherits = Prusa ABS @PG; *ABS08PG* first_layer_temperature = 265 temperature = 265 +[filament:Prusa ABS @MK4] +inherits = Prusa ABS; *ABSMK4* + +[filament:Prusa ABS @MK4 0.6] +inherits = Prusa ABS @MK4; *ABS06MK4* + +[filament:Prusa ABS @MK4 0.8] +inherits = Prusa ABS @MK4; *ABS08MK4* +first_layer_temperature = 265 +temperature = 265 + [filament:*ABS MMU2*] inherits = Prusa ABS compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material @@ -6330,7 +7925,7 @@ max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 220 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic HIPS] inherits = *ABS* @@ -6350,7 +7945,7 @@ max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 230 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic HIPS @PG] inherits = Generic HIPS; *ABSPG* @@ -6362,6 +7957,15 @@ inherits = Generic HIPS @PG; *ABS06PG* [filament:Generic HIPS @PG 0.8] inherits = Generic HIPS @PG; *ABS08PG* +[filament:Generic HIPS @MK4] +inherits = Generic HIPS; *ABSMK4* + +[filament:Generic HIPS @MK4 0.6] +inherits = Generic HIPS @MK4; *ABS06MK4* + +[filament:Generic HIPS @MK4 0.8] +inherits = Generic HIPS @MK4; *ABS08MK4* + [filament:Prusa PETG] inherits = *PET* renamed_from = "Prusa PET" @@ -6369,7 +7973,7 @@ filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 -compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusa PETG @PG] inherits = Prusa PETG; *PETPG* @@ -6386,7 +7990,7 @@ filament_vendor = Verbatim filament_cost = 27.90 filament_density = 1.27 filament_spool_weight = 235 -compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim PETG @PG] inherits = Verbatim PETG; *PETPG* @@ -6406,7 +8010,7 @@ filament_cost = 36.29 filament_density = 1.27 filament_spool_weight = 201 filament_type = PETG -compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PETG @PG] inherits = Prusament PETG; *PETPG* @@ -6428,7 +8032,7 @@ extrusion_multiplier = 1.03 filament_cost = 54.99 filament_density = 1.27 filament_colour = #BBBBBB -compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PETG Carbon Fiber @PG] inherits = Prusament PETG; *PETPG*; *04PLUSPG* @@ -6439,34 +8043,34 @@ inherits = Prusament PETG Carbon Fiber @PG; *PET06PG* [filament:Prusament PETG Carbon Fiber @PG 0.8] inherits = Prusament PETG Carbon Fiber @PG; *PET08PG* -[filament:Prusament PETG Tungsten 75%] -inherits = *PET* -filament_vendor = Prusa Polymers -filament_colour = #BBBBBB -first_layer_temperature = 255 -temperature = 265 -filament_cost = 277.09 -filament_density = 4 -filament_spool_weight = 201 -filament_type = PETG -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) -cooling = 0 -min_fan_speed = 50 -max_fan_speed = 70 -start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.01{else}0{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif nozzle_diameter[0]==0.4}M900 K12{else}M900 K0{endif} ; Filament gcode LA 1.0" +## [filament:Prusament PETG Tungsten 75%] +## inherits = *PET* +## filament_vendor = Prusa Polymers +## filament_colour = #BBBBBB +## first_layer_temperature = 255 +## temperature = 265 +## filament_cost = 277.09 +## filament_density = 4 +## filament_spool_weight = 201 +## filament_type = PETG +## compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +## cooling = 0 +## min_fan_speed = 50 +## max_fan_speed = 70 +## start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.01{else}0{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif nozzle_diameter[0]==0.4}M900 K12{else}M900 K0{endif} ; Filament gcode LA 1.0" -[filament:Prusament PETG Tungsten 75% @PG] -inherits = Prusament PETG Tungsten 75%; *PETPG* -filament_max_volumetric_speed = 8 -start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.01{else}0{endif} ; Filament gcode" +## [filament:Prusament PETG Tungsten 75% @PG] +## inherits = Prusament PETG Tungsten 75%; *PETPG* +## filament_max_volumetric_speed = 8 +## start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.01{else}0{endif} ; Filament gcode" -[filament:Prusament PETG Tungsten 75% @PG 0.6] -inherits = Prusament PETG Tungsten 75% @PG; *PET06PG* -filament_max_volumetric_speed = 9 +## [filament:Prusament PETG Tungsten 75% @PG 0.6] +## inherits = Prusament PETG Tungsten 75% @PG; *PET06PG* +## filament_max_volumetric_speed = 9 -[filament:Prusament PETG Tungsten 75% @PG 0.8] -inherits = Prusament PETG Tungsten 75% @PG; *PET08PG* -filament_max_volumetric_speed = 10 +## [filament:Prusament PETG Tungsten 75% @PG 0.8] +## inherits = Prusament PETG Tungsten 75% @PG; *PET08PG* +## filament_max_volumetric_speed = 10 [filament:Prusa PETG @0.6 nozzle] inherits = *PET06* @@ -6635,7 +8239,7 @@ filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.24 filament_spool_weight = 230 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusa PLA @PG] inherits = Prusa PLA; *PLAPG* @@ -6781,6 +8385,17 @@ inherits = Eolas Prints TPU 93A @PG; *FLEX06PG* [filament:Eolas Prints TPU 93A @PG 0.8] inherits = Eolas Prints TPU 93A @PG; *FLEX08PG* +[filament:Eolas Prints TPU 93A @MK4] +inherits = Eolas Prints TPU 93A; *FLEXMK4* +extrusion_multiplier = 1.1 +filament_retract_length = 2.5 + +[filament:Eolas Prints TPU 93A @MK4 0.6] +inherits = Eolas Prints TPU 93A @MK4; *FLEX06MK4* + +[filament:Eolas Prints TPU 93A @MK4 0.8] +inherits = Eolas Prints TPU 93A @MK4; *FLEX08MK4* + [filament:Print With Smile PLA] inherits = *PLA* filament_vendor = Print With Smile @@ -6860,6 +8475,17 @@ inherits = Print With Smile ASA @PG; *ABS08PG* first_layer_temperature = 255 temperature = 255 +[filament:Print With Smile ASA @MK4] +inherits = Print With Smile ASA; *ABSMK4* + +[filament:Print With Smile ASA @MK4 0.6] +inherits = Print With Smile ASA @MK4; *ABS06MK4* + +[filament:Print With Smile ASA @MK4 0.8] +inherits = Print With Smile ASA @MK4; *ABS08MK4* +first_layer_temperature = 255 +temperature = 255 + [filament:Print With Smile ABS] inherits = *ABSC* filament_vendor = Print With Smile @@ -6882,6 +8508,15 @@ inherits = Print With Smile ABS @PG; *ABS06PG* [filament:Print With Smile ABS @PG 0.8] inherits = Print With Smile ABS @PG; *ABS08PG* +[filament:Print With Smile ABS @MK4] +inherits = Print With Smile ABS; *ABSMK4* + +[filament:Print With Smile ABS @MK4 0.6] +inherits = Print With Smile ABS @MK4; *ABS06MK4* + +[filament:Print With Smile ABS @MK4 0.8] +inherits = Print With Smile ABS @MK4; *ABS08MK4* + [filament:Print With Smile PETG CF] inherits = Extrudr XPETG CF filament_vendor = Print With Smile @@ -6930,14 +8565,27 @@ filament_deretract_speed = 20 [filament:Print With Smile TPU96A @PG] inherits = Print With Smile TPU96A; *FLEXPG* filament_retract_length = 2 -filament_max_volumetric_speed = 3 +filament_max_volumetric_speed = 2.5 [filament:Print With Smile TPU96A @PG 0.6] inherits = Print With Smile TPU96A @PG; *FLEX06PG* -filament_max_volumetric_speed = 5 +filament_max_volumetric_speed = 3.5 [filament:Print With Smile TPU96A @PG 0.8] inherits = Print With Smile TPU96A @PG; *FLEX08PG* +filament_max_volumetric_speed = 7 + +[filament:Print With Smile TPU96A @MK4] +inherits = Print With Smile TPU96A; *FLEXMK4* +filament_retract_length = 2 +filament_max_volumetric_speed = 3 + +[filament:Print With Smile TPU96A @MK4 0.6] +inherits = Print With Smile TPU96A @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 5 + +[filament:Print With Smile TPU96A @MK4 0.8] +inherits = Print With Smile TPU96A @MK4; *FLEX08MK4* filament_max_volumetric_speed = 8 [filament:Fiberlogy Easy PLA] @@ -6966,7 +8614,7 @@ filament_vendor = Fiberlogy filament_spool_weight = 330 filament_cost = 20 filament_density = 1.27 -compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material first_layer_bed_temperature = 80 bed_temperature = 80 first_layer_temperature = 235 @@ -7019,6 +8667,15 @@ inherits = Fiberlogy ASA @PG; *ABS06PG* [filament:Fiberlogy ASA @PG 0.8] inherits = Fiberlogy ASA @PG; *ABS08PG* +[filament:Fiberlogy ASA @MK4] +inherits = Fiberlogy ASA; *ABSMK4* + +[filament:Fiberlogy ASA @MK4 0.6] +inherits = Fiberlogy ASA @MK4; *ABS06MK4* + +[filament:Fiberlogy ASA @MK4 0.8] +inherits = Fiberlogy ASA @MK4; *ABS08MK4* + [filament:Fiberlogy ASA @MINI] inherits = Fiberlogy ASA; *ABSMINI* @@ -7042,12 +8699,15 @@ disable_fan_first_layers = 5 [filament:Fiberlogy Easy ABS @PG] inherits = Fiberlogy Easy ABS; *ABSPG* +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberlogy Easy ABS @PG 0.6] inherits = Fiberlogy Easy ABS; *ABS06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberlogy Easy ABS @PG 0.8] inherits = Fiberlogy Easy ABS; *ABS08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberlogy Easy ABS @MINI] inherits = Fiberlogy Easy ABS; *ABSMINI* @@ -7139,7 +8799,7 @@ filament_spool_weight = 330 [filament:Fiberlogy FiberFlex 40D @PG] inherits = Fiberlogy FiberFlex 40D; *FLEXPG* -filament_max_volumetric_speed = 4 +filament_max_volumetric_speed = 3 filament_retract_length = 2.2 extrusion_multiplier = 1.1 first_layer_temperature = 220 @@ -7147,10 +8807,26 @@ temperature = 220 [filament:Fiberlogy FiberFlex 40D @PG 0.6] inherits = Fiberlogy FiberFlex 40D @PG; *FLEX06PG* -filament_max_volumetric_speed = 6 +filament_max_volumetric_speed = 4.5 [filament:Fiberlogy FiberFlex 40D @PG 0.8] inherits = Fiberlogy FiberFlex 40D @PG; *FLEX08PG* +filament_max_volumetric_speed = 9 + +[filament:Fiberlogy FiberFlex 40D @MK4] +inherits = Fiberlogy FiberFlex 40D; *FLEXMK4* +filament_max_volumetric_speed = 4 +filament_retract_length = 2.2 +extrusion_multiplier = 1.1 +first_layer_temperature = 220 +temperature = 220 + +[filament:Fiberlogy FiberFlex 40D @MK4 0.6] +inherits = Fiberlogy FiberFlex 40D @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6 + +[filament:Fiberlogy FiberFlex 40D @MK4 0.8] +inherits = Fiberlogy FiberFlex 40D @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:Fiberlogy FiberFlex 40D @MINI] @@ -7184,15 +8860,28 @@ filament_retract_length = 1.2 [filament:Fiberlogy MattFlex 40D @PG] inherits = Fiberlogy MattFlex 40D; *FLEXPG* -filament_max_volumetric_speed = 4 +filament_max_volumetric_speed = 3 filament_retract_length = 2.2 [filament:Fiberlogy MattFlex 40D @PG 0.6] inherits = Fiberlogy MattFlex 40D @PG; *FLEX06PG* -filament_max_volumetric_speed = 6 +filament_max_volumetric_speed = 4.5 [filament:Fiberlogy MattFlex 40D @PG 0.8] inherits = Fiberlogy MattFlex 40D @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Fiberlogy MattFlex 40D @MK4] +inherits = Fiberlogy MattFlex 40D; *FLEXMK4* +filament_max_volumetric_speed = 4 +filament_retract_length = 2.2 + +[filament:Fiberlogy MattFlex 40D @MK4 0.6] +inherits = Fiberlogy MattFlex 40D @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 6 + +[filament:Fiberlogy MattFlex 40D @MK4 0.8] +inherits = Fiberlogy MattFlex 40D @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:Fiberlogy FiberFlex 30D] @@ -7208,7 +8897,7 @@ filament_retract_length = 1.2 [filament:Fiberlogy FiberFlex 30D @PG] inherits = Fiberlogy FiberFlex 30D; *FLEXPG* -filament_max_volumetric_speed = 3.5 +filament_max_volumetric_speed = 2.5 filament_retract_length = 3 first_layer_temperature = 220 temperature = 220 @@ -7218,10 +8907,28 @@ extrusion_multiplier = 1.1 [filament:Fiberlogy FiberFlex 30D @PG 0.6] inherits = Fiberlogy FiberFlex 30D @PG; *FLEX06PG* -filament_max_volumetric_speed = 7 +filament_max_volumetric_speed = 5 [filament:Fiberlogy FiberFlex 30D @PG 0.8] inherits = Fiberlogy FiberFlex 30D @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Fiberlogy FiberFlex 30D @MK4] +inherits = Fiberlogy FiberFlex 30D; *FLEXMK4* +filament_max_volumetric_speed = 3.5 +filament_retract_length = 3 +first_layer_temperature = 220 +temperature = 220 +first_layer_bed_temperature = 55 +bed_temperature = 55 +extrusion_multiplier = 1.1 + +[filament:Fiberlogy FiberFlex 30D @MK4 0.6] +inherits = Fiberlogy FiberFlex 30D @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 7 + +[filament:Fiberlogy FiberFlex 30D @MK4 0.8] +inherits = Fiberlogy FiberFlex 30D @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:Fiberlogy FiberSatin] @@ -7367,6 +9074,18 @@ filament_max_volumetric_speed = 8 inherits = Fiberlogy Nylon PA12 @PG; *ABS08PG* filament_max_volumetric_speed = 11 +[filament:Fiberlogy Nylon PA12 @MK4] +inherits = Fiberlogy Nylon PA12; *ABSMK4* +filament_max_volumetric_speed = 6 + +[filament:Fiberlogy Nylon PA12 @MK4 0.6] +inherits = Fiberlogy Nylon PA12 @MK4; *ABS06MK4* +filament_max_volumetric_speed = 8 + +[filament:Fiberlogy Nylon PA12 @MK4 0.8] +inherits = Fiberlogy Nylon PA12 @MK4; *ABS08MK4* +filament_max_volumetric_speed = 11 + [filament:Fiberlogy Nylon PA12+CF15] inherits = Fiberlogy Nylon PA12 extrusion_multiplier = 0.97 @@ -7382,13 +9101,14 @@ fan_below_layer_time = 20 bridge_fan_speed = 30 fan_always_on = 0 filament_max_volumetric_speed = 8 -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberlogy Nylon PA12+CF15 @PG] inherits = Fiberlogy Nylon PA12+CF15; *ABSPG*; *04PLUSPG* first_layer_bed_temperature = 100 bed_temperature = 105 filament_max_volumetric_speed = 8 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="XL" and ! single_extruder_multi_material [filament:Fiberlogy Nylon PA12+CF15 @PG 0.6] inherits = Fiberlogy Nylon PA12+CF15 @PG; *ABS06PG* @@ -7398,6 +9118,19 @@ filament_max_volumetric_speed = 10 inherits = Fiberlogy Nylon PA12+CF15 @PG; *ABS08PG* filament_max_volumetric_speed = 12 +[filament:Fiberlogy Nylon PA12+CF15 @MK4] +inherits = Fiberlogy Nylon PA12+CF15; *ABSMK4*; *04PLUSPG* +filament_max_volumetric_speed = 8 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=="MK4" and ! single_extruder_multi_material + +[filament:Fiberlogy Nylon PA12+CF15 @MK4 0.6] +inherits = Fiberlogy Nylon PA12+CF15 @MK4; *ABS06MK4* +filament_max_volumetric_speed = 10 + +[filament:Fiberlogy Nylon PA12+CF15 @MK4 0.8] +inherits = Fiberlogy Nylon PA12+CF15 @MK4; *ABS08MK4* +filament_max_volumetric_speed = 12 + [filament:Fiberlogy Nylon PA12+GF15] inherits = Fiberlogy Nylon PA12+CF15 filament_density = 1.13 @@ -7415,6 +9148,18 @@ filament_density = 1.13 inherits = Fiberlogy Nylon PA12+CF15 @PG 0.8 filament_density = 1.13 +[filament:Fiberlogy Nylon PA12+GF15 @MK4] +inherits = Fiberlogy Nylon PA12+CF15 @MK4 +filament_density = 1.13 + +[filament:Fiberlogy Nylon PA12+GF15 @MK4 0.6] +inherits = Fiberlogy Nylon PA12+CF15 @MK4 0.6 +filament_density = 1.13 + +[filament:Fiberlogy Nylon PA12+GF15 @MK4 0.8] +inherits = Fiberlogy Nylon PA12+CF15 @MK4 0.8 +filament_density = 1.13 + [filament:Fiberlogy PP] inherits = *ABS* filament_vendor = Fiberlogy @@ -7441,16 +9186,19 @@ filament_max_volumetric_speed = 5 [filament:Fiberlogy PP @PG] inherits = Fiberlogy PP; *ABSPG* filament_max_volumetric_speed = 5 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberlogy PP @PG 0.6] inherits = Fiberlogy PP @PG; *ABS06PG* filament_max_volumetric_speed = 7 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberlogy PP @PG 0.8] inherits = Fiberlogy PP @PG; *ABS08PG* filament_max_volumetric_speed = 10 first_layer_temperature = 250 temperature = 250 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Filament PM PLA] inherits = *PLA* @@ -7602,7 +9350,7 @@ filament_cost = 36.29 filament_density = 1.24 filament_spool_weight = 201 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PLA @PG] inherits = Prusament PLA; *PLAPG* @@ -7629,7 +9377,7 @@ filament_max_volumetric_speed = 8 filament_type = PVB filament_soluble = 1 filament_colour = #FFFF6F -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" @@ -7743,16 +9491,30 @@ filament_deretract_speed = 20 [filament:Fillamentum Flexfill 98A @PG] inherits = Fillamentum Flexfill 98A; *FLEXPG* -filament_max_volumetric_speed = 3 +filament_max_volumetric_speed = 2.5 filament_retract_length = 3 extrusion_multiplier = 1.08 [filament:Fillamentum Flexfill 98A @PG 0.6] inherits = Fillamentum Flexfill 98A @PG; *FLEX06PG* -filament_max_volumetric_speed = 5 +filament_max_volumetric_speed = 3 [filament:Fillamentum Flexfill 98A @PG 0.8] inherits = Fillamentum Flexfill 98A @PG; *FLEX08PG* +filament_max_volumetric_speed = 8 + +[filament:Fillamentum Flexfill 98A @MK4] +inherits = Fillamentum Flexfill 98A; *FLEXMK4* +filament_max_volumetric_speed = 3 +filament_retract_length = 3 +extrusion_multiplier = 1.08 + +[filament:Fillamentum Flexfill 98A @MK4 0.6] +inherits = Fillamentum Flexfill 98A @MK4; *FLEX06MK4* +filament_max_volumetric_speed = 4 + +[filament:Fillamentum Flexfill 98A @MK4 0.8] +inherits = Fillamentum Flexfill 98A @MK4; *FLEX08MK4* filament_max_volumetric_speed = 10 [filament:ColorFabb VarioShore TPU] @@ -7770,6 +9532,10 @@ temperature = 220 inherits = ColorFabb VarioShore TPU; *FLEXPG* filament_max_volumetric_speed = 1.5 +[filament:ColorFabb VarioShore TPU @MK4] +inherits = ColorFabb VarioShore TPU; *FLEXMK4* +filament_max_volumetric_speed = 1.5 + [filament:Taulman Bridge] inherits = *common* filament_vendor = Taulman @@ -7791,7 +9557,7 @@ temperature = 260 max_fan_speed = 0 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" -compatible_printers_condition = printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Taulman Bridge @PG] inherits = Taulman Bridge; *ABSPG* @@ -7808,6 +9574,20 @@ filament_max_volumetric_speed = 12 first_layer_temperature = 270 temperature = 270 +[filament:Taulman Bridge @MK4] +inherits = Taulman Bridge; *ABSMK4* +filament_max_volumetric_speed = 7 + +[filament:Taulman Bridge @MK4 0.6] +inherits = Taulman Bridge @MK4; *ABS06MK4* +filament_max_volumetric_speed = 9 + +[filament:Taulman Bridge @MK4 0.8] +inherits = Taulman Bridge @MK4; *ABS08MK4* +filament_max_volumetric_speed = 12 +first_layer_temperature = 270 +temperature = 270 + [filament:Taulman Bridge @MINI] inherits = Taulman Bridge bed_temperature = 90 @@ -7844,14 +9624,17 @@ temperature = 250 [filament:Fillamentum Nylon FX256 @PG] inherits = Fillamentum Nylon FX256; *PAPG* filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fillamentum Nylon FX256 @PG 0.6] inherits = Fillamentum Nylon FX256 @PG; *PA06PG* filament_max_volumetric_speed = 8 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fillamentum Nylon FX256 @PG 0.8] inherits = Fillamentum Nylon FX256 @PG; *PA08PG* filament_max_volumetric_speed = 11 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA Pure Pro] inherits = *common* @@ -7881,19 +9664,28 @@ filament_retract_speed = 40 filament_retract_lift = nil filament_retract_before_travel = 1.5 filament_wipe = 0 -compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA Pure Pro @PG] inherits = Fiberthree F3 PA Pure Pro; *PAPG* filament_max_volumetric_speed = 5 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA Pure Pro @PG 0.6] inherits = Fiberthree F3 PA Pure Pro @PG; *PA06PG* filament_max_volumetric_speed = 7 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA Pure Pro @PG 0.8] inherits = Fiberthree F3 PA Pure Pro @PG; *PA08PG* filament_max_volumetric_speed = 10 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-CF Pro] inherits = *common* @@ -7923,19 +9715,28 @@ filament_retract_speed = 40 filament_retract_lift = nil filament_retract_before_travel = 1.5 filament_wipe = 0 -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-CF Pro @PG] inherits = Fiberthree F3 PA-CF Pro; *PAPG* filament_max_volumetric_speed = 5 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-CF Pro @PG 0.6] inherits = Fiberthree F3 PA-CF Pro; *PA06PG* filament_max_volumetric_speed = 7 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-CF Pro @PG 0.8] inherits = Fiberthree F3 PA-CF Pro; *PA08PG* filament_max_volumetric_speed = 10 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-GF Pro] inherits = Fiberthree F3 PA-CF Pro @@ -7949,14 +9750,23 @@ min_fan_speed = 15 [filament:Fiberthree F3 PA-GF Pro @PG] inherits = Fiberthree F3 PA-GF Pro; *PAPG* filament_max_volumetric_speed = 5 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-GF Pro @PG 0.6] inherits = Fiberthree F3 PA-GF Pro @PG; *PA06PG* filament_max_volumetric_speed = 7 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-GF Pro @PG 0.8] inherits = Fiberthree F3 PA-GF Pro @PG; *PA08PG* filament_max_volumetric_speed = 10 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-GF30 Pro] inherits = Prusament PC Blend Carbon Fiber @@ -7969,7 +9779,7 @@ temperature = 285 first_layer_bed_temperature = 90 bed_temperature = 90 fan_below_layer_time = 10 -compatible_printers_condition = printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material max_fan_speed = 15 min_fan_speed = 15 filament_type = PA @@ -7978,14 +9788,23 @@ filament_max_volumetric_speed = 6 [filament:Fiberthree F3 PA-GF30 Pro @PG] inherits = Fiberthree F3 PA-GF30 Pro; *PAPG* filament_max_volumetric_speed = 6 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-GF30 Pro @PG 0.6] inherits = Fiberthree F3 PA-GF30 Pro @PG; *PA06PG* filament_max_volumetric_speed = 7.5 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Fiberthree F3 PA-GF30 Pro @PG 0.8] inherits = Fiberthree F3 PA-GF30 Pro @PG; *PA08PG* filament_max_volumetric_speed = 10 +bed_temperature = 90 +first_layer_bed_temperature = 90 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Taulman T-Glase] inherits = *PET* @@ -8003,12 +9822,15 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no [filament:Taulman T-Glase @PG] inherits = Taulman T-Glase; *PAPG* +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Taulman T-Glase @PG 0.6] inherits = Taulman T-Glase @PG; *PA06PG* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Taulman T-Glase @PG 0.8] inherits = Taulman T-Glase @PG; *PA08PG* +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim PLA] inherits = *PLA* @@ -8055,14 +9877,17 @@ temperature = 210 [filament:Verbatim BVOH @PG] inherits = Verbatim BVOH; *ABSPG* filament_max_volumetric_speed = 4 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim BVOH @PG 0.6] inherits = Verbatim BVOH @PG; *ABS06PG* filament_max_volumetric_speed = 6 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim BVOH @PG 0.8] inherits = Verbatim BVOH @PG; *ABS08PG* filament_max_volumetric_speed = 9 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim BVOH @MMU2] inherits = Verbatim BVOH @@ -8148,14 +9973,17 @@ temperature = 220 [filament:Verbatim PP @PG] inherits = Verbatim PP; *ABSPG* filament_max_volumetric_speed = 5 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim PP @PG 0.6] inherits = Verbatim PP @PG; *ABS06PG* filament_max_volumetric_speed = 7 +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:Verbatim PP @PG 0.8] inherits = Verbatim PP @PG; *ABS08PG* filament_max_volumetric_speed = 10 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material [filament:FormFutura Centaur PP] inherits = *common* @@ -8181,7 +10009,7 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no temperature = 235 filament_wipe = 0 filament_retract_lift = 0 -compatible_printers_condition = nozzle_diameter[0]>=0.35 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]>=0.35 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:FormFutura Centaur PP @PG] inherits = FormFutura Centaur PP; *PETPG* @@ -8437,12 +10265,12 @@ filament_cost = 54.99 filament_colour = #BBBBBB compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 -[filament:Prusament PETG Tungsten 75% @MINI] -inherits = Prusament PETG Tungsten 75%; *PETMINI* -full_fan_speed_layer = 5 -start_filament_gcode = "M900 K0" -filament_colour = #BBBBBB -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" +## [filament:Prusament PETG Tungsten 75% @MINI] +## inherits = Prusament PETG Tungsten 75%; *PETMINI* +## full_fan_speed_layer = 5 +## start_filament_gcode = "M900 K0" +## filament_colour = #BBBBBB +## compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Kimya PETG Carbon @MINI] inherits = Kimya PETG Carbon; *PETMINI* @@ -8697,14 +10525,14 @@ first_layer_temperature = 220 temperature = 220 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic ABS @0.8 nozzle] inherits = Generic ABS first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 15 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic PETG @0.8 nozzle] inherits = Generic PETG @@ -8713,7 +10541,7 @@ temperature = 250 filament_max_volumetric_speed = 20 filament_retract_lift = 0.2 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusa PLA @0.8 nozzle] inherits = Prusa PLA @@ -8721,7 +10549,7 @@ first_layer_temperature = 220 temperature = 220 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusa PETG @0.8 nozzle] inherits = Prusa PETG @@ -8729,26 +10557,26 @@ first_layer_temperature = 240 temperature = 250 filament_max_volumetric_speed = 20 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusa ABS @0.8 nozzle] inherits = Prusa ABS first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 15 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic FLEX @0.8 nozzle] inherits = Generic FLEX filament_max_volumetric_speed = 4.3 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Generic HIPS @0.8 nozzle] inherits = Generic HIPS first_layer_temperature = 240 temperature = 240 filament_max_volumetric_speed = 15 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PLA @0.8 nozzle] inherits = Prusament PLA @@ -8756,7 +10584,7 @@ first_layer_temperature = 225 temperature = 225 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PETG @0.8 nozzle] inherits = Prusament PETG @@ -8765,7 +10593,7 @@ temperature = 260 filament_max_volumetric_speed = 20 filament_retract_lift = 0.2 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PETG Carbon Fiber @0.8 nozzle] inherits = Prusament PETG @0.8 nozzle @@ -8781,64 +10609,64 @@ first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PC Blend @0.8 nozzle] inherits = Prusament PC Blend filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PC Blend Carbon Fiber @0.8 nozzle] inherits = Prusament PC Blend Carbon Fiber filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PA11 Carbon Fiber @0.8 nozzle] inherits = Prusament PA11 Carbon Fiber filament_max_volumetric_speed = 11 -compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material [filament:Prusament PA11 Carbon Fiber @0.8 nozzle MK2] inherits = Prusament PA11 Carbon Fiber @MK2 filament_max_volumetric_speed = 11 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="XL" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) [filament:Prusament PC Blend @0.8 nozzle MK2] inherits = Prusament PC Blend @MK2 filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="XL" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) [filament:Prusament PVB @0.8 nozzle] inherits = Prusament PVB first_layer_temperature = 225 temperature = 225 filament_max_volumetric_speed = 15 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and ! single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material slowdown_below_layer_time = 20 ## Filaments 0.8 nozzle MMU2 [filament:Generic HIPS @MMU2 0.8 nozzle] inherits = Generic HIPS @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material [filament:Prusament ASA @MMU2 0.8 nozzle] inherits = Prusament ASA @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material slowdown_below_layer_time = 20 filament_max_volumetric_speed = 14 [filament:Prusament PC Blend @MMU2 0.8 nozzle] inherits = Prusament PC Blend @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 12 [filament:Generic PETG @MMU2 0.8 nozzle] inherits = Generic PETG @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 18 first_layer_temperature = 240 temperature = 240 @@ -8847,7 +10675,7 @@ filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5. [filament:Prusament PETG @MMU2 0.8 nozzle] inherits = Prusament PETG @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 18 first_layer_temperature = 240 temperature = 240 @@ -8864,26 +10692,26 @@ filament_colour = #BBBBBB [filament:Generic PLA @MMU2 0.8 nozzle] inherits = Generic PLA @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 14 first_layer_temperature = 215 temperature = 210 [filament:Prusament PLA @MMU2 0.8 nozzle] inherits = Prusament PLA @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 14 first_layer_temperature = 215 temperature = 210 [filament:Verbatim BVOH @MMU2 0.8 nozzle] inherits = Verbatim BVOH @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 8 [filament:PrimaSelect PVA+ @MMU2 0.8 nozzle] inherits = PrimaSelect PVA+ @MMU2 -compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="XL" and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 8 ## Filaments 0.8 nozzle MINI @@ -9413,6 +11241,22 @@ material_type = Tough material_vendor = Prusa Polymers material_colour = #EC0000 +[sla_material:Prusament Resin Model Solid Grey @0.025] +inherits = *common 0.025* +exposure_time = 4.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #9C9D9D + +[sla_material:Prusament Resin Model Alabaster White @0.025] +inherits = *common 0.025* +exposure_time = 4.5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #D6D7D8 + [sla_material:Prusament Resin BioBased60 Herbal Green @0.025] inherits = *common 0.025* exposure_time = 7 @@ -10426,6 +12270,22 @@ material_type = Tough material_vendor = Prusa Polymers material_colour = #EC0000 +[sla_material:Prusament Resin Model Solid Grey @0.05] +inherits = *common 0.05* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #9C9D9D + +[sla_material:Prusament Resin Model Alabaster White @0.05] +inherits = *common 0.05* +exposure_time = 5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #D6D7D8 + [sla_material:Prusament Resin BioBased60 Herbal Green @0.05] inherits = *common 0.05* exposure_time = 8 @@ -10878,6 +12738,22 @@ material_type = Tough material_vendor = Prusa Polymers material_colour = #3AD200 +[sla_material:Prusament Resin Model Solid Grey @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #9C9D9D + +[sla_material:Prusament Resin Model Alabaster White @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #D6D7D8 + [sla_material:Prusament Resin BioBased60 Magma Red @0.1] inherits = *common 0.1* exposure_time = 13 @@ -11134,6 +13010,22 @@ material_type = Tough material_vendor = Prusa Polymers material_colour = #EC0000 +[sla_material:Prusament Resin Model Solid Grey @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #9C9D9D + +[sla_material:Prusament Resin Model Alabaster White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #D6D7D8 + [sla_material:Prusament Resin BioBased60 Herbal Green @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 3.5 @@ -11612,6 +13504,22 @@ material_type = Tough material_vendor = Prusa Polymers material_colour = #EC0000 +[sla_material:Prusament Resin Model Solid Grey @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #9C9D9D + +[sla_material:Prusament Resin Model Alabaster White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.2 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #D6D7D8 + [sla_material:Prusament Resin BioBased60 Herbal Green @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 4 @@ -12294,6 +14202,30 @@ material_type = Tough material_vendor = 3DJake material_colour = #007EFD +[sla_material:LOCTITE 3D IND475 @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 4 +initial_exposure_time = 15 +material_type = Flexible +material_vendor = Henkel +material_colour = #FFFFFF + +[sla_material:LOCTITE 3D PRO476 @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 7 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Henkel +material_colour = #595959 + +[sla_material:LOCTITE 3D 3843 HDT60 High Toughness @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 13 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Henkel +material_colour = #595959 + ## 0.1 SL1S ## Prusa Polymers 0.1 @@ -12394,6 +14326,22 @@ material_type = Tough material_vendor = Prusa Polymers material_colour = #EC0000 +[sla_material:Prusament Resin Model Solid Grey @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #9C9D9D + +[sla_material:Prusament Resin Model Alabaster White @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.8 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Prusa Polymers +material_colour = #D6D7D8 + [sla_material:Prusament Resin BioBased60 Herbal Green @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 5 @@ -12754,6 +14702,30 @@ material_type = Tough material_vendor = 3DJake material_colour = #007EFD +[sla_material:LOCTITE 3D IND475 @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 6.5 +initial_exposure_time = 15 +material_type = Flexible +material_vendor = Henkel +material_colour = #FFFFFF + +[sla_material:LOCTITE 3D PRO476 @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 9 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Henkel +material_colour = #595959 + +[sla_material:LOCTITE 3D 3843 HDT60 High Toughness @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 18 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Henkel +material_colour = #595959 + [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 @@ -13577,7 +15549,7 @@ max_layer_height = 0.25 min_layer_height = 0.07 silent_mode = 0 remaining_times = 1 -printer_notes = PRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_XL\nPG +printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_XL\nPG retract_lift_below = 359 retract_speed = 35 deretract_speed = 25 @@ -13643,13 +15615,120 @@ machine_max_acceleration_travel = 1500 inherits = *commonXL* printer_variant = 0.8 nozzle_diameter = 0.8 -retract_length = 0.8 +retract_length = 0.6 +retract_before_wipe = 50% retract_lift = 0.25 +retract_speed = 25 +deretract_speed = 15 max_layer_height = 0.6 min_layer_height = 0.2 default_print_profile = 0.40mm QUALITY @XL 0.8 default_filament_profile = "Prusament PLA @PG 0.8" +[printer:*commonMK4*] +inherits = *common* +bed_shape = 0x0,250x0,250x210,0x210 +max_print_height = 220 +printer_variant = 0.4 +printer_model = MK4 +nozzle_diameter = 0.4 +end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y170 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z] +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 2500 +machine_max_acceleration_extruding = 2000 +machine_max_acceleration_retracting = 1200 +machine_max_acceleration_travel = 2000 +machine_max_acceleration_x = 2500 +machine_max_acceleration_y = 2500 +machine_max_acceleration_z = 200 +machine_max_feedrate_e = 100 +machine_max_feedrate_x = 200 +machine_max_feedrate_y = 200 +machine_max_feedrate_z = 40 +machine_max_jerk_e = 10 +machine_max_jerk_x = 8 +machine_max_jerk_y = 8 +machine_max_jerk_z = 2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 0.25 +min_layer_height = 0.07 +silent_mode = 0 +remaining_times = 1 +printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK4\nPG +retract_lift_below = 219 +retract_speed = 35 +deretract_speed = 25 +retract_before_travel = 1.5 +retract_before_wipe = 80% +retract_layer_change = 1 +retract_length = 0.8 +start_gcode = M17 ; enable steppers\nM862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\n{if filament_type[initial_tool]=="PC" or filament_type[initial_tool]=="NYLON"}\nM104 S{first_layer_temperature[initial_tool]-25} ; set extruder temp for bed leveling\nM109 R{first_layer_temperature[initial_tool]-25} ; wait for temp\n{elsif filament_type[initial_tool]=="FLEX"}\nM104 S210 ; set extruder temp for bed leveling\nM109 R210 ; wait for temp\n{else}\nM104 S170 ; set extruder temp for bed leveling\nM109 R170 ; wait for temp\n{endif}\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\n; probe to clean the nozzle\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)+32} Y{((first_layer_print_min[1]) - 4)} Z{5} F4800\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{32} H{4}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} Z{40} F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 ; mesh bed leveling\nM104 S[first_layer_temperature] ; set extruder temp\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5} Z{30} F4800\n\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.2 F720\nG92 E0\n\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\n{if filament_type[initial_tool]=="FLEX"}\nG1 E4 F2400 ; deretraction\n{else}\nG1 E2 F2400 ; deretraction\n{endif}\n\n; move right\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) + 32} E{32 * 0.15} F1000\n; move down\nG1 Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5 - 1.5} E{1.5 * 0.15} F1000\n; move left\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} E{32 * 0.30} F800\n\nG92 E0\nM221 S100 ; set flow to 100% +default_print_profile = 0.20mm QUALITY @MK4 0.4 +default_filament_profile = "Prusament PLA @PG" +thumbnails = 16x16,313x173,440x240 +thumbnails_format = PNG +gcode_flavor = marlin2 +high_current_on_filament_swap = 0 +retract_lift = 0.2 + +[printer:Original Prusa MK4 0.4 nozzle] +inherits = *commonMK4* +max_layer_height = 0.30 + +[printer:Original Prusa MK4 0.6 nozzle] +inherits = *commonMK4* +printer_variant = 0.6 +nozzle_diameter = 0.6 +retract_length = 0.7 +retract_lift = 0.2 +max_layer_height = 0.40 +min_layer_height = 0.15 +default_print_profile = 0.25mm QUALITY @MK4 0.6 + +[printer:Original Prusa MK4 0.5 nozzle] +inherits = *commonMK4* +printer_variant = 0.5 +nozzle_diameter = 0.5 +retract_length = 0.7 +max_layer_height = 0.32 +min_layer_height = 0.07 +default_print_profile = 0.20mm QUALITY @MK4 0.5 + +[printer:Original Prusa MK4 0.3 nozzle] +inherits = *commonMK4* +printer_variant = 0.3 +nozzle_diameter = 0.3 +retract_length = 0.7 +max_layer_height = 0.22 +min_layer_height = 0.05 +default_print_profile = 0.16mm QUALITY @MK4 0.3 + +[printer:Original Prusa MK4 0.25 nozzle] +inherits = *commonMK4* +printer_variant = 0.25 +nozzle_diameter = 0.25 +retract_length = 0.8 +retract_lift = 0.15 +max_layer_height = 0.15 +min_layer_height = 0.05 +default_print_profile = 0.12mm QUALITY @MK4 0.25 +machine_max_acceleration_travel = 1500 + +[printer:Original Prusa MK4 0.8 nozzle] +inherits = *commonMK4* +printer_variant = 0.8 +nozzle_diameter = 0.8 +retract_length = 0.6 +retract_before_wipe = 50% +retract_lift = 0.25 +retract_speed = 25 +deretract_speed = 15 +max_layer_height = 0.6 +min_layer_height = 0.2 +default_print_profile = 0.40mm QUALITY @MK4 0.8 +default_filament_profile = "Prusament PLA @PG 0.8" + [printer:Original Prusa SL1] printer_technology = SLA printer_model = SL1