Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support

https://github.com/prusa3d/PrusaSlicer-settings/pull/108

resources/profiles/TriLAB.idx

@@ -1,3 +1,5 @@
+min_slic3r_version = 2.3.0-alpha3
+0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
 min_slic3r_version = 2.3.0-alpha0
 0.0.2 Added 0.15mm print profile
 0.0.1 Initial TriLAB bundle

resources/profiles/TriLAB.ini

@@ -1,13 +1,12 @@
-# DeltiQ presets for PrusaSlicer
+# Print profiles for the TriLAB printers
-# https://github.com/prusa3d/PrusaSlicer-settings/pull/100
+# based on https://github.com/trilab3d/PrusaSlicer-settings/tree/master/live/TriLAB
-# based on https://github.com/trilab3d/Slicer-profiles/tree/deltiq/Slic3r_PE_1_41_3
 
 [vendor]
 # Vendor name will be shown by the Config Wizard.
 name = TriLAB
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.2
+config_version = 0.0.3
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -16,215 +15,364 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
-[printer_model:DQM]
+[printer_model:DQ2]
-name = TRILAB DeltiQ M
+name = DeltiQ 2
 variants = 0.4
 technology = FFF
-bed_model = 
+family = DeltiQ 2
-bed_texture = 
+bed_model = dq2_bed.stl
+bed_texture = dq2_bed_texture.svg
+default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
+
+[printer_model:DQ2P]
+name = DeltiQ 2 Plus
+variants = 0.4
+technology = FFF
+family = DeltiQ 2
+bed_model = dq2_bed.stl
+bed_texture = dq2_bed_texture.svg
+default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
+
+[printer_model:DQ2+FP2]
+name = DeltiQ 2 + FlexPrint 2
+variants = 0.4
+technology = FFF
+family = DeltiQ 2
+bed_model = dq2_bed.stl
+bed_texture = dq2_bed_texture.svg
+default_materials = DeltiQ FlexPrint 2 FLEX; DeltiQ FlexPrint 2 FLEX Smartfil; DeltiQ FlexPrint 2 PLA; DeltiQ FlexPrint 2 ASA; DeltiQ FlexPrint 2 PET; DeltiQ FlexPrint 2 ABS; DeltiQ FlexPrint 2 CPE
+
+[printer_model:DQ2P+FP2]
+name = DeltiQ 2 Plus + FlexPrint 2
+variants = 0.4
+technology = FFF
+family = DeltiQ 2
+bed_model = dq2_bed.stl
+bed_texture = dq2_bed_texture.svg
+default_materials = DeltiQ FlexPrint 2 FLEX; DeltiQ FlexPrint 2 FLEX Smartfil; DeltiQ FlexPrint 2 PLA; DeltiQ FlexPrint 2 ASA; DeltiQ FlexPrint 2 PET; DeltiQ FlexPrint 2 ABS; DeltiQ FlexPrint 2 CPE
+
+[printer_model:DQ2+FP]
+name = DeltiQ 2 + FlexPrint
+variants = 0.4
+technology = FFF
+family = DeltiQ 2
+bed_model = dq2_bed.stl
+bed_texture = dq2_bed_texture.svg
+default_materials = DeltiQ FlexPrint FLEX; DeltiQ FlexPrint PLA; DeltiQ FlexPrint ASA; DeltiQ FlexPrint PET; DeltiQ FlexPrint ABS; DeltiQ FlexPrint CPE
+
+[printer_model:DQ2P+FP]
+name = DeltiQ 2 Plus + FlexPrint
+variants = 0.4
+technology = FFF
+family = DeltiQ 2
+bed_model = dq2_bed.stl
+bed_texture = dq2_bed_texture.svg
+default_materials = DeltiQ FlexPrint FLEX; DeltiQ FlexPrint PLA; DeltiQ FlexPrint ASA; DeltiQ FlexPrint PET; DeltiQ FlexPrint ABS; DeltiQ FlexPrint CPE
+
+[printer_model:DQM]
+name = DeltiQ M
+variants = 0.4
+technology = FFF
+family = DeltiQ
 default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
 
 [printer_model:DQL]
-name = TRILAB DeltiQ L
+name = DeltiQ L
 variants = 0.4
 technology = FFF
-bed_model = 
+family = DeltiQ
-bed_texture = 
 default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
 
 [printer_model:DQXL]
-name = TRILAB DeltiQ XL
+name = DeltiQ XL
 variants = 0.4
 technology = FFF
-bed_model = 
+family = DeltiQ
-bed_texture = 
 default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
 
-
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
-[print:DeltiQ 0.15mm]
-inherits = DeltiQ 0.2mm
-layer_height = 0.15
-bottom_solid_layers = 5
-top_solid_layers = 6
 
-[print:DeltiQ 0.2mm]
+[print:DeltiQ 0.20mm Normal]
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.7
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 20
+bridge_speed = 30
 brim_width = 0
-clip_multipart_objects = 0
+clip_multipart_objects = 1
-compatible_printers_condition = printer_notes=~/.*TRILAB.*/
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/
 complete_objects = 0
 default_acceleration = 2000
-dont_support_bridges = 1
+dont_support_bridges = 0
-elefant_foot_compensation = 0
+draft_shield = 0
-ensure_vertical_shell_thickness = 1
+elefant_foot_compensation = 0.2
-external_fill_pattern = rectilinear
+ensure_vertical_shell_thickness = 0
-external_perimeter_extrusion_width = 0.4
+external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
+extruder_clearance_height = 60
-extruder_clearance_radius = 20
+extruder_clearance_radius = 45
-extrusion_width = 0.4
+extrusion_width = 0.45
 fill_angle = 45
-fill_density = 15%
+fill_density = 20%
-fill_pattern = gyroid
+fill_pattern = grid
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.4
+first_layer_extrusion_width = 0.42
-first_layer_height = 0.3
+first_layer_height = 0.2
 first_layer_speed = 20
-gap_fill_speed = 50
+gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.55
+infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 50
+infill_speed = 60
-inherits = 
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
-max_print_speed = 100
+max_print_speed = 60
-max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_speed = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 10
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode
+output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 1500
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.4
+perimeter_extrusion_width = 0.45
-perimeter_speed = 40
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
-skirt_distance = 2
+skirt_distance = 3
-skirt_height = 1
+skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 20
-solid_infill_below_area = 15
+solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.4
+solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
+solid_infill_speed = 60
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
-support_material_angle = 0
+support_material_angle = 40
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
-support_material_extrusion_width = 0
+support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
-support_material_interface_layers = 3
+support_material_interface_layers = 4
-support_material_interface_spacing = 0
+support_material_interface_spacing = 0.4
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 2.5
+support_material_spacing = 2
 support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 55
-support_material_with_sheath = 1
+support_material_with_sheath = 0
-support_material_xy_spacing = 100%
+support_material_xy_spacing = 0.6
 thin_walls = 0
-threads = 4
+threads = 12
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
+top_solid_infill_speed = 40
 top_solid_layers = 5
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:DeltiQ 0.10mm Normal]
+inherits = DeltiQ 0.20mm Normal
+bottom_solid_layers = 7
+bottom_solid_min_thickness = 0.7
+bridge_flow_ratio = 0.7
+bridge_speed = 30
+ensure_vertical_shell_thickness = 1
+layer_height = 0.1
+first_layer_height = 0.2
+top_solid_layers = 9
+top_solid_min_thickness = 0.7
+top_infill_extrusion_width = 0.4
+fill_pattern = grid
+fill_density = 20%
+
+[print:DeltiQ 0.15mm Normal]
+inherits = DeltiQ 0.20mm Normal
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.7
+bridge_flow_ratio = 0.7
+bridge_speed = 30
+ensure_vertical_shell_thickness = 1
+layer_height = 0.15
+first_layer_height = 0.2
+top_solid_layers = 7
+top_solid_min_thickness = 0.7
+fill_pattern = grid
+fill_density = 20%
+
+[print:DeltiQ 0.20mm Vase]
+inherits = DeltiQ 0.20mm Normal
+perimeters = 1
+top_solid_layers = 0
+fill_density = 0
+support_material = 0
+spiral_vase = 1
+ensure_vertical_shell_thickness = 1
+thin_walls = 0
+
+[print:DeltiQ 0.20mm FLEX]
+inherits = DeltiQ 0.20mm Normal
+avoid_crossing_perimeters = 0
+bridge_flow_ratio = 0.90
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*FLEXPRINT.*/
+only_retract_when_crossing_perimeters = 1
+overhangs = 0
+seam_position = nearest
+thin_walls = 0
+bridge_speed = 20
+external_perimeter_speed = 20
+first_layer_speed = 20
+gap_fill_speed = 25
+infill_speed = 30
+perimeter_speed = 25
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_contact_distance = 0.3
+top_solid_infill_speed = 20
+top_fill_pattern = rectilinear
+fill_pattern = grid
+fill_density = 25%
+travel_speed = 200
+max_print_speed = 30
+complete_objects = 1
+
+
 [filament:*DeltiQ common*]
-bed_temperature = 90
+compatible_printers = 
-bridge_fan_speed = 50
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/)
-compatible_printers_condition = printer_notes=~/.*TRILAB.*/
-cooling = 1
-filament_vendor = Generic
 disable_fan_first_layers = 3
-end_filament_gcode = ""
 extrusion_multiplier = 1
-fan_always_on = 1
+filament_colour = #FF0000
-fan_below_layer_time = 60
-filament_colour = #FF3232
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 0
-filament_density = 1.25
 filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 10
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
+start_filament_gcode = "; FILAMENT_START_GCODE"
+end_filament_gcode = "; FILAMENT_END_GCODE"
+
+[filament:DeltiQ PET]
+inherits = *DeltiQ common* 
+bed_temperature = 90
+bridge_fan_speed = 50
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = DevilDesign
+filament_cost = 480
+filament_density = 1.27
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_speed = 45
 filament_type = PET
-filament_unload_time = 0
+filament_wipe = 1
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
 first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 10
 slowdown_below_layer_time = 5
-start_filament_gcode = ""
 temperature = 245
 
-[filament:DeltiQ PET]
-inherits = *DeltiQ common* 
-
 [filament:DeltiQ PLA]
 inherits = *DeltiQ common* 
 bed_temperature = 55
 bridge_fan_speed = 100
-disable_fan_first_layers = 1
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_vendor = Fillamentum
+filament_cost = 767
+filament_density = 1.24
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 90%
+filament_retract_layer_change = 1
+filament_retract_length = 4.0
+filament_retract_lift = 0.2
+filament_retract_speed = 30
 filament_type = PLA
+filament_wipe = 1
 first_layer_bed_temperature = 55
-first_layer_temperature = 215
+first_layer_temperature = 220
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
+min_print_speed = 10
 slowdown_below_layer_time = 4
-temperature = 210
+temperature = 215
 
 [filament:DeltiQ ABS]
 inherits = *DeltiQ common* 
 bed_temperature = 100
-bridge_fan_speed = 20
+bridge_fan_speed = 25
-filament_density = 1.04
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Fillamentum
+filament_cost = 774
+filament_density = 1.08
+filament_max_volumetric_speed = 4
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_speed = 25
 filament_type = ABS
+filament_wipe = 1
 first_layer_bed_temperature = 100
 first_layer_temperature = 255
-max_fan_speed = 20
+max_fan_speed = 15
 min_fan_speed = 5
+min_print_speed = 10
 slowdown_below_layer_time = 15
 temperature = 255
 
@@ -237,11 +385,160 @@ temperature = 265
 
 [filament:DeltiQ CPE]
 inherits = *DeltiQ common* 
-bed_temperature = 85
+bed_temperature = 90
+bridge_fan_speed = 50
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Fillamentum
+filament_cost = 1214
+filament_density = 1.25
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 0
+filament_retract_length = 4.3
+filament_retract_lift = 0.2
+filament_retract_speed = 45
 filament_type = CPE
-first_layer_bed_temperature = 85
+filament_wipe = 1
-first_layer_temperature = 260
+first_layer_bed_temperature = 90
-temperature = 265
+first_layer_temperature = 265
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 260
+
+
+[filament:DeltiQ FlexPrint 2 PET]
+inherits = DeltiQ PET 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+filament_retract_length = 1.4
+filament_retract_speed = 35
+filament_retract_before_wipe = 0%
+
+[filament:DeltiQ FlexPrint 2 PLA]
+inherits = DeltiQ PLA
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+filament_retract_length = 1.2
+filament_retract_speed = 28
+
+[filament:DeltiQ FlexPrint 2 ABS]
+inherits = DeltiQ ABS
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+filament_retract_length = 0.8
+filament_retract_speed = 25
+
+[filament:DeltiQ FlexPrint 2 ASA]
+inherits = DeltiQ ASA
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+
+[filament:DeltiQ FlexPrint 2 CPE]
+inherits = DeltiQ CPE
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+filament_retract_length = 0.8
+filament_retract_speed = 35
+filament_deretract_speed = 0
+filament_retract_before_wipe = 0%
+
+[filament:DeltiQ FlexPrint 2 FLEX]
+inherits = *DeltiQ common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+bed_temperature = 50
+bridge_fan_speed = 80
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.07
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Fillamentum
+filament_cost = 1870
+filament_density = 1.22
+filament_deretract_speed = 0
+filament_max_volumetric_speed = 2.9
+filament_retract_before_travel = 1
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 0
+filament_retract_length = 1.6
+filament_retract_lift = 0.2
+filament_retract_restart_extra = nil
+filament_retract_speed = 20
+filament_type = FLEX
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 225
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 4
+temperature = 225
+
+[filament:DeltiQ FlexPrint 2 FLEX Smartfil]
+inherits = *DeltiQ common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
+bed_temperature = 50
+bridge_fan_speed = 80
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.07
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Smart Materials 3D
+filament_cost = 1209
+filament_density = 1.21
+filament_deretract_speed = 0
+filament_max_volumetric_speed = 2.5
+filament_retract_before_travel = 1
+filament_retract_before_wipe = nil
+filament_retract_layer_change = 0
+filament_retract_length = 1.2
+filament_retract_lift = 0.2
+filament_retract_restart_extra = nil
+filament_retract_speed = 20
+filament_type = FLEX
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 4
+temperature = 240
+
+
+[filament:DeltiQ FlexPrint PET]
+inherits = DeltiQ PET 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
+[filament:DeltiQ FlexPrint PLA]
+inherits = DeltiQ PLA
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
+filament_retract_length = 0.7
+filament_retract_speed = 28
+
+[filament:DeltiQ FlexPrint ABS]
+inherits = DeltiQ ABS
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
+[filament:DeltiQ FlexPrint ASA]
+inherits = DeltiQ ASA
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
+[filament:DeltiQ FlexPrint CPE]
+inherits = DeltiQ CPE
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
+filament_retract_length = 0.7
+filament_retract_speed = 25
+filament_deretract_speed = 0
+filament_retract_before_wipe = 0%
 
                      
 [printer:*DeltiQ*]
@@ -251,64 +548,117 @@ before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
 between_objects_gcode = 
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
-default_filament_profile = ""
+default_filament_profile = "DeltiQ PLA"
-default_print_profile = 
+default_print_profile = DeltiQ 0.20mm Normal
-deretract_speed = 25
+deretract_speed = 0
 end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning
 extra_loading_move = -2
-extruder_colour = ""
+extruder_colour = #FF0000
 extruder_offset = 0x0
 gcode_flavor = repetier
+host_type = octoprint
 layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 500,200
-machine_max_feedrate_y = 500,200
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 10,10
-machine_max_jerk_y = 10,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
 max_layer_height = 0.25
 max_print_height = 320
 min_layer_height = 0.15
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
+print_host = 
 printer_model = 
-printer_notes = TRILAB
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL
 printer_settings_id = 
 printer_variant = 
-printer_vendor = 
+printer_vendor = TriLAB Group s.r.o.
+printhost_apikey = 
+printhost_cafile = 
 remaining_times = 0
-retract_before_travel = 2
+retract_before_travel = 3
 retract_before_wipe = 100%
 retract_layer_change = 1
-retract_length = 4.1
+retract_length = 4.0
 retract_length_toolchange = 10
-retract_lift = 0.3
+retract_lift = 0.2
 retract_lift_above = 0
-retract_lift_below = 0
+retract_lift_below = 319
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 33
+retract_speed = 30
-silent_mode = 1
+serial_port = 
+serial_speed = 250000
+silent_mode = 0
 single_extruder_multi_material = 0
 start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
+thumbnails = 
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
 use_volumetric_e = 0
 variable_layer_height = 0
-wipe = 0
+wipe = 1
 z_offset = 0
 
+[printer:*DeltiQ 2*]
+inherits = *DeltiQ*
+before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
+end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100  ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
+gcode_flavor = reprap
+layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
+pause_print_gcode = M0
+start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
+
+[printer:*DeltiQ 2 FlexPrint*]
+inherits = *DeltiQ 2*
+start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
+default_print_profile = DeltiQ 0.20mm FLEX
+default_filament_profile = "DeltiQ FlexPrint 2 FLEX"
+retract_length = 0.7
+retract_speed = 25
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1
+
+[printer:*DeltiQ 2 FlexPrint 2*]
+inherits = *DeltiQ 2 FlexPrint*
+default_filament_profile = "DeltiQ FlexPrint 2 FLEX"
+retract_length = 0.8
+retract_speed = 25
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2
+
+[printer:DeltiQ 2]
+inherits = *DeltiQ 2*
+printer_model = DQ2
+printer_variant = 0.4
+max_print_height = 320
+
+[printer:DeltiQ 2 Plus]
+inherits = *DeltiQ 2*
+printer_model = DQ2P
+printer_variant = 0.4
+max_print_height = 500
+
+[printer:DeltiQ 2 + FlexPrint 2]
+inherits = *DeltiQ 2 FlexPrint 2*
+printer_model = DQ2+FP2
+printer_variant = 0.4
+max_print_height = 320
+
+[printer:DeltiQ 2 Plus + FlexPrint 2]
+inherits = *DeltiQ 2 FlexPrint 2*
+printer_model = DQ2P+FP2
+printer_variant = 0.4
+max_print_height = 500
+
+[printer:DeltiQ 2 + FlexPrint]
+inherits = *DeltiQ 2 FlexPrint*
+printer_model = DQ2+FP
+printer_variant = 0.4
+max_print_height = 320
+
+[printer:DeltiQ 2 Plus + FlexPrint]
+inherits = *DeltiQ 2 FlexPrint*
+printer_model = DQ2P+FP
+printer_variant = 0.4
+max_print_height = 500
+         
 [printer:DeltiQ L]
 inherits = *DeltiQ*
 printer_model = DQL
@@ -337,6 +687,6 @@ retract_length = 4.5
 retract_speed = 35
 
 [presets]
-print = DeltiQ 0.2mm
+print = DeltiQ 0.20mm Normal
-printer = DeltiQ L
+printer = DeltiQ 2
 filament = DeltiQ PLA