GitHub-Proxy/PrusaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/prusa3d/PrusaSlicer.git synced 2025-08-14 16:45:53 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

fix prointConfig for dynamic speeds - for single line options, label must be used (instead of fulllabel)

Browse Source
This commit is contained in:
Pavel Mikus 2023-02-22 15:11:15 +01:00 committed by Pavel Mikuš
parent a496444b7e
commit 59faa86915
1 changed files with 9 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
src/libslic3r/PrintConfig.cpp
View File

@ -535,20 +535,16 @@ void PrintConfigDef::init_fff_params()
def->label = L("Enable dynamic overhang speeds"); def->label = L("Enable dynamic overhang speeds");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("This setting enables dynamic speed control on overhangs." def->tooltip = L("This setting enables dynamic speed control on overhangs."
"Controls overhang levels, expressed as a percentage of overlap of the extrusion with the previous layer - " "Overhang size is expressed as a percentage of overlap of the extrusion with the previous layer - "
"100% represents full overlap - no overhang is present, while 0% represents full overhang (floating extrusion). " "100% represents full overlap - no overhang is present, while 0% represents full overhang (floating extrusion, bridge). "
"Each overhang level then corresponds with the overhang speed below. Speeds for overhang levels in between are " "You can set speed for each overhang size listed below. Speeds for overhang levels in between are "
"calculated via linear interpolation." "calculated via linear interpolation. If set as percentage, the speed is calculated over the external perimeter speed."
"If you set multiple different speeds for the same overhang level, only the largest speed is used. "
"This setting controls the speed on the overhang with the overlap value set above. "
"The speed of the extrusion is calculated as a linear interpolation of the speeds for higher and lower overlap. "
"If set as percentage, the speed is calculated over the external perimeter speed."
); );
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false)); def->set_default_value(new ConfigOptionBool(false));
def = this->add("overhang_speed_0", coFloatOrPercent); def = this->add("overhang_speed_0", coFloatOrPercent);
def->full_label = L("speed for 0\% overlap (bridge)"); def->label = L("speed for 0\% overlap (bridge)");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value."); def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");
@ -557,7 +553,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(15, false)); def->set_default_value(new ConfigOptionFloatOrPercent(15, false));
def = this->add("overhang_speed_1", coFloatOrPercent); def = this->add("overhang_speed_1", coFloatOrPercent);
def->full_label = L("speed for 20\% overlap"); def->label = L("speed for 20\% overlap");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value."); def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");
@ -566,7 +562,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(20, false)); def->set_default_value(new ConfigOptionFloatOrPercent(20, false));
def = this->add("overhang_speed_2", coFloatOrPercent); def = this->add("overhang_speed_2", coFloatOrPercent);
def->full_label = L("speed for 40\% overlap"); def->label = L("speed for 40\% overlap");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value."); def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");
@ -575,7 +571,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(25, false)); def->set_default_value(new ConfigOptionFloatOrPercent(25, false));
def = this->add("overhang_speed_3", coFloatOrPercent); def = this->add("overhang_speed_3", coFloatOrPercent);
def->full_label = L("speed for 60\% overlap"); def->label = L("speed for 60\% overlap");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value."); def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");
@ -584,7 +580,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(25, false)); def->set_default_value(new ConfigOptionFloatOrPercent(25, false));
def = this->add("overhang_speed_4", coFloatOrPercent); def = this->add("overhang_speed_4", coFloatOrPercent);
def->full_label = L("speed for 80\% overlap"); def->label = L("speed for 80\% overlap");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value."); def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");