GitHub-Proxy/PrusaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/prusa3d/PrusaSlicer.git synced 2025-08-12 22:09:09 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Updated tooltips for the new parameters

Browse Source
This commit is contained in:
Lukas Matena 2024-02-23 16:19:09 +01:00
parent 763c02f218
commit 60981059f6
1 changed files with 22 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
src/libslic3r/PrintConfig.cpp
View File

@ -3884,7 +3884,9 @@ void PrintConfigDef::init_sla_params()
def = this->add("area_fill", coFloat);
def->label = L("Area fill");
def->tooltip = L("The percentage of the bed area. \nIf the print area exceeds the specified value, \nthen a slow tilt will be used, otherwise - a fast tilt");
def->tooltip = L("The percentage of the bed area.\nIf the area of a particular layer is smaller than 'area_fill', "
"then 'Below area fill' parameters are used to determine the layer separation (tearing) procedure. "
"Otherwise 'Above area fill parameters are used.");
def->sidetext = L("%");
def->min = 0;
def->mode = comExpert;
@ -4408,7 +4410,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("delay_before_exposure_ms", coFloats);
def->full_label = L("Delay before exposure");
def->tooltip = L("Delay time before exposure");
def->tooltip = L("Delay before exposure after previous layer separation.");
def->sidetext = L("s");
def->min = 0;
def->max = 30;
@ -4417,7 +4419,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("delay_after_exposure_ms", coFloats);
def->full_label = L("Delay after exposure");
def->tooltip = L("Delay time after exposure");
def->tooltip = L("Delay after exposure before layer separation.");
def->sidetext = L("s");
def->min = 0;
def->max = 30;
@ -4426,7 +4428,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tower_hop_height_nm", coInts);
def->full_label = L("Tower hop height");
def->tooltip = L("Tower hop height");
def->tooltip = L("The height of the tower raise.");
def->sidetext = L("mm");
def->min = 0;
def->max = 100;
@ -4436,7 +4438,7 @@ void PrintConfigDef::init_sla_tilt_params()
//ysFIXME
def = this->add("tower_profile", coEnums);
def->full_label = L("Tower profile");
def->tooltip = L("Tower profile");
def->tooltip = L("Tower profile used for tower raise.");
def->mode = comExpert;
def->set_enum<TiltProfiles>({
{ "homingFast", L("Homing Fast"), },
@ -4452,7 +4454,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_down_initial_profile", coEnums);
def->full_label = L("Tilt down initial profile");
def->tooltip = L("Tilt down initial profile");
def->tooltip = L("Tilt profile used for an initial portion of tilt down move.");
def->mode = comExpert;
def->set_enum<TiltProfiles>({
{ "homingFast", L("Homing Fast"), },
@ -4468,7 +4470,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_down_finish_profile", coEnums);
def->full_label = L("Tilt down finish profile");
def->tooltip = L("Tilt down finish profile");
def->tooltip = L("Tilt profile used for the rest of the tilt down move.");
def->mode = comExpert;
def->set_enum<TiltProfiles>({
{ "homingFast", L("Homing Fast"), },
@ -4484,7 +4486,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_up_initial_profile", coEnums);
def->full_label = L("Tilt up initial profile");
def->tooltip = L("Tilt up initial profile");
def->tooltip = L("Tilt profile used for an initial portion of tilt up move.");
def->mode = comExpert;
def->set_enum<TiltProfiles>({
{ "homingFast", L("Homing Fast"), },
@ -4500,7 +4502,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_up_finish_profile", coEnums);
def->full_label = L("Tilt up finish profile");
def->tooltip = L("Tilt up finish profile");
def->tooltip = L("Tilt profile used for the rest of the tilt-up.");
def->mode = comExpert;
def->set_enum<TiltProfiles>({
{ "homingFast", L("Homing Fast"), },
@ -4516,13 +4518,13 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("use_tilt", coBools);
def->full_label = L("Use tilt");
def->tooltip = L("Use tilt");
def->tooltip = L("If enabled, tilt is used for layer separation. Otherwise, all the parameters below are ignored.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBools({ true, true }));
def = this->add("tilt_down_offset_steps", coInts);
def->full_label = L("Tilt down offset steps");
def->tooltip = L("Tilt down offset steps");
def->tooltip = L("Number of steps to move down from the calibrated (horizontal) position with 'tilt_down_initial_profile'.");
def->sidetext = L("μ-steps");
def->min = 0;
def->max = 10000;
@ -4531,7 +4533,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_down_offset_delay_ms", coFloats);
def->full_label = L("Tilt down offset delay");
def->tooltip = L("Tilt down offset delay");
def->tooltip = L("Delay after the tilt reaches 'tilt_down_offset_steps' position.");
def->sidetext = L("s");
def->min = 0;
def->max = 20;
@ -4540,7 +4542,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_down_cycles", coInts);
def->full_label = L("Tilt down cycles");
def->tooltip = L("Tilt down cycles");
def->tooltip = L("Number of cycles to split the rest of the tilt down move.");
def->min = 0;
def->max = 10;
def->mode = comExpert;
@ -4548,7 +4550,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_down_delay_ms", coFloats);
def->full_label = L("Tilt down delay");
def->tooltip = L("Tilt down delay");
def->tooltip = L("The delay between tilt-down cycles.");
def->sidetext = L("s");
def->min = 0;
def->max = 20;
@ -4557,7 +4559,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_up_offset_steps", coInts);
def->full_label = L("Tilt up offset steps");
def->tooltip = L("Tilt up offset steps");
def->tooltip = L("Move tilt up to calibrated (horizontal) position minus this offset.");
def->sidetext = L("μ-steps");
def->min = 0;
def->max = 10000;
@ -4566,7 +4568,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_up_offset_delay_ms", coFloats);
def->full_label = L("Tilt up offset delay");
def->tooltip = L("Tilt up offset delay");
def->tooltip = L("Delay after the tilt reaches 'tilt_up_offset_steps' position.");
def->sidetext = L("s");
def->min = 0;
def->max = 20;
@ -4575,7 +4577,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_up_cycles", coInts);
def->full_label = L("Tilt up cycles");
def->tooltip = L("Tilt up cycles");
def->tooltip = L("Number of cycles to split the rest of the tilt-up.");
def->min = 0;
def->max = 10;
def->mode = comExpert;
@ -4583,7 +4585,7 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("tilt_up_delay_ms", coFloats);
def->full_label = L("Tilt up delay");
def->tooltip = L("Tilt up delay");
def->tooltip = L("The delay between tilt-up cycles.");
def->sidetext = L("s");
def->min = 0;
def->max = 20;
@ -4592,7 +4594,8 @@ void PrintConfigDef::init_sla_tilt_params()
def = this->add("moves_time_ms", coFloats);
def->full_label = L("Moves time");
def->tooltip = L("Moves time");
def->tooltip = L("Measured time of this layer separation procedure. This parameter will "
"be deprecated and tilt times will be automatically calculated.");
def->sidetext = L("s");
def->min = 0;
def->max = 60;