GitHub-Proxy/PrusaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/prusa3d/PrusaSlicer.git synced 2025-08-11 16:58:59 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Updated tooltips

Browse Source
This commit is contained in:
Lukas Matena 2024-03-26 13:27:12 +01:00
parent 7e3e2b577b
commit 686e1c54bc
1 changed files with 12 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
src/libslic3r/PrintConfig.cpp
View File

@ -499,20 +499,21 @@ void PrintConfigDef::init_fff_params()
def = this->add("chamber_temperature", coInts);
def->label = L("Nominal");
def->full_label = L("Chamber temperature");
def->tooltip = L("Chamber temperature. Note that this setting doesn't do anything, but you can access it in Start G-code, Tool change G-code and the other ones, like for other temperature settings.");
def->tooltip = L("Required chamber temperature for the print. Only used when heated chamber is supported by the printer.");
def->sidetext = L("°C");
def->min = 0;
def->max = 300;
def->max = 1000;
def->mode = comExpert;
def->set_default_value(new ConfigOptionInts{ 0 });
def = this->add("chamber_minimal_temperature", coInts);
def->label = L("Minimal");
def->full_label = L("Chamber minimal temperature");
def->tooltip = L("Chamber temperature. Note that this setting doesn't do anything, but you can access it in Start G-code, Tool change G-code and the other ones, like for other temperature settings.");
def->tooltip = L("Minimal chamber temperature that the printer should wait for before the print starts. This allows "
"to start the print before the nominal chamber temperature is reached.");
def->sidetext = L("°C");
def->min = 0;
def->max = 300;
def->max = 1000;
def->mode = comExpert;
def->set_default_value(new ConfigOptionInts{ 0 });
@ -2725,16 +2726,17 @@ void PrintConfigDef::init_fff_params()
def = this->add("autoemit_temperature_commands", coBool);
def->label = L("Emit temperature commands automatically");
def->tooltip = L("When enabled, PrusaSlicer will check whether your Custom Start G-Code contains M104 or M190. "
def->tooltip = L("When enabled, PrusaSlicer will check whether your custom Start G-Code contains G-codes to set "
"extruder, bed or chamber temperature (M104, M109, M140, M190, M141 and M191). "
"If so, the temperatures will not be emitted automatically so you're free to customize "
"the order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put "
"a \"M109 S[first_layer_temperature]\" command wherever you want.\n"
"If your Custom Start G-Code does NOT contain M104 or M190, "
"PrusaSlicer will execute the Start G-Code after bed reached its target temperature "
"and extruder just started heating.\n\n"
"When disabled, PrusaSlicer will NOT emit commands to heat up extruder and bed, "
"leaving both to Custom Start G-Code.");
"If your custom Start G-Code does NOT contain these G-codes, "
"PrusaSlicer will execute the Start G-Code after heated chamber was set to its temperature, "
"bed reached its target temperature and extruder just started heating.\n\n"
"When disabled, PrusaSlicer will NOT emit commands to heat up extruder, bed or chamber, "
"leaving all to Custom Start G-Code.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));