1.2.0-beta0

resources/profiles/PrusaResearch.idx

@@ -1,143 +1,147 @@
-min_slic3r_version = 2.3.0-alpha4
+min_slic3r_version = 2.3.0-beta0
-1.2.0-alpha0 Added filament spool weights
+1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights. 
-min_slic3r_version = 2.2.0-alpha3
+min_slic3r_version = 2.3.0-alpha4
-1.1.10 Updated firmware version.
+1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
-1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
+1.2.0-alpha0 Added filament spool weights
-1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
+min_slic3r_version = 2.2.0-alpha3
-1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
+1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
-1.1.6 Updated firmware version for MK2.5/S and MK3/S.
+1.1.10 Updated firmware version.
-1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
+1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
-1.1.4 Added Prusament PC Blend filament profile.
+1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
-1.1.3 Added SLA material and filament profile
+1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
-1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
+1.1.6 Updated firmware version for MK2.5/S and MK3/S.
-1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
+1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
-1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
+1.1.4 Added Prusament PC Blend filament profile.
-1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
+1.1.3 Added SLA material and filament profile
-1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
+1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
-# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
+1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
-# so they will see the print bed.
+1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
-max_slic3r_version = 2.2.0-alpha2
+1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
-min_slic3r_version = 2.2.0-alpha0
+1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
-1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
+# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
-1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
+# so they will see the print bed.
-min_slic3r_version = 2.1.1-beta0
+max_slic3r_version = 2.2.0-alpha2
-1.0.10 Updated firmware version for MK2.5/S and MK3/S.
+min_slic3r_version = 2.2.0-alpha0
-1.0.9 Updated firmware version for MK2.5/S and MK3/S.
+1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
-1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
+1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
-1.0.7 Updated layer height limits for MINI
+min_slic3r_version = 2.1.1-beta0
-1.0.6 Added Prusa MINI profiles
+1.0.10 Updated firmware version for MK2.5/S and MK3/S.
-min_slic3r_version = 2.1.0-alpha0
+1.0.9 Updated firmware version for MK2.5/S and MK3/S.
-1.0.5 Added SLA materials
+1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
-1.0.4 Updated firmware version and 0.25mm nozzle profiles
+1.0.7 Updated layer height limits for MINI
-1.0.3 Added filament profiles
+1.0.6 Added Prusa MINI profiles
-1.0.2 Added SLA materials
+min_slic3r_version = 2.1.0-alpha0
-1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
+1.0.5 Added SLA materials
-1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
+1.0.4 Updated firmware version and 0.25mm nozzle profiles
-1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
+1.0.3 Added filament profiles
-1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
+1.0.2 Added SLA materials
-1.0.0-alpha2 Printer model and nozzle diameter check
+1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
-1.0.0-alpha1 Added Prusament ASA profile
+1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
-1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
+1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
-min_slic3r_version = 1.42.0-alpha6
+1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
-0.8.9 Updated firmware version for MK2.5/S and MK3/S.
+1.0.0-alpha2 Printer model and nozzle diameter check
-0.8.8 Updated firmware version for MK2.5/S and MK3/S.
+1.0.0-alpha1 Added Prusament ASA profile
-0.8.7 Updated firmware version
+1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
-0.8.6 Updated firmware version for MK2.5/S and MK3/S
+min_slic3r_version = 1.42.0-alpha6
-0.8.5 Updated SL1 printer and material settings
+0.8.9 Updated firmware version for MK2.5/S and MK3/S.
-0.8.4 Added Prusament ASA profile
+0.8.8 Updated firmware version for MK2.5/S and MK3/S.
-0.8.3 FW version and SL1 materials update
+0.8.7 Updated firmware version
-0.8.2 FFF and SL1 settings update
+0.8.6 Updated firmware version for MK2.5/S and MK3/S
-0.8.1 Output settings and SLA materials update
+0.8.5 Updated SL1 printer and material settings
-0.8.0 Updated for the PrusaSlicer 2.0.0 final release
+0.8.4 Added Prusament ASA profile
-0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
+0.8.3 FW version and SL1 materials update
-0.8.0-rc1 Updated SLA profiles
+0.8.2 FFF and SL1 settings update
-0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
+0.8.1 Output settings and SLA materials update
-0.8.0-beta4 Updated SLA profiles
+0.8.0 Updated for the PrusaSlicer 2.0.0 final release
-0.8.0-beta3 Updated SLA profiles
+0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
-0.8.0-beta2 Updated SLA profiles
+0.8.0-rc1 Updated SLA profiles
-0.8.0-beta1 Updated SLA profiles
+0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
-0.8.0-beta Updated SLA profiles
+0.8.0-beta4 Updated SLA profiles
-0.8.0-alpha9 Updated SLA and FFF profiles
+0.8.0-beta3 Updated SLA profiles
-0.8.0-alpha8 Updated SLA profiles
+0.8.0-beta2 Updated SLA profiles
-0.8.0-alpha7 Updated SLA profiles
+0.8.0-beta1 Updated SLA profiles
-0.8.0-alpha6 Updated SLA profiles
+0.8.0-beta Updated SLA profiles
-min_slic3r_version = 1.42.0-alpha
+0.8.0-alpha9 Updated SLA and FFF profiles
-0.8.0-alpha Updated SLA profiles
+0.8.0-alpha8 Updated SLA profiles
-0.4.0-alpha4 Updated SLA profiles
+0.8.0-alpha7 Updated SLA profiles
-0.4.0-alpha3 Update of SLA profiles
+0.8.0-alpha6 Updated SLA profiles
-0.4.0-alpha2 First SLA profiles
+min_slic3r_version = 1.42.0-alpha
-min_slic3r_version = 1.41.3-alpha
+0.8.0-alpha Updated SLA profiles
-0.4.12 Updated firmware version for MK2.5/S and MK3/S.
+0.4.0-alpha4 Updated SLA profiles
-0.4.11 Updated firmware version for MK2.5/S and MK3/S.
+0.4.0-alpha3 Update of SLA profiles
-0.4.10 Updated firmware version
+0.4.0-alpha2 First SLA profiles
-0.4.9 Updated firmware version for MK2.5/S and MK3/S
+min_slic3r_version = 1.41.3-alpha
-0.4.8 MK2.5/3/S FW update
+0.4.12 Updated firmware version for MK2.5/S and MK3/S.
-0.4.7 MK2/S/MMU FW update
+0.4.11 Updated firmware version for MK2.5/S and MK3/S.
-0.4.6 Updated firmware versions for MK2.5/S and MK3/S
+0.4.10 Updated firmware version
-0.4.5 Enabled remaining time support for MK2/S/MMU1
+0.4.9 Updated firmware version for MK2.5/S and MK3/S
-0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
+0.4.8 MK2.5/3/S FW update
-0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
+0.4.7 MK2/S/MMU FW update
-0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
+0.4.6 Updated firmware versions for MK2.5/S and MK3/S
-0.4.1 New MK2.5S and MK3S FW versions
+0.4.5 Enabled remaining time support for MK2/S/MMU1
-0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
+0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-min_slic3r_version = 1.41.1
+0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.3.11 Updated firmware version for MK2.5/S and MK3/S.
+0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.3.10 Updated firmware version
+0.4.1 New MK2.5S and MK3S FW versions
-0.3.9 Updated firmware version for MK2.5/S and MK3/S
+0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
-0.3.8 MK2.5/3/S FW update
+min_slic3r_version = 1.41.1
-0.3.7 MK2/S/MMU FW update
+0.3.11 Updated firmware version for MK2.5/S and MK3/S.
-0.3.6 Updated firmware versions for MK2.5 and MK3
+0.3.10 Updated firmware version
-0.3.5 New MK2.5 and MK3 FW versions
+0.3.9 Updated firmware version for MK2.5/S and MK3/S
-0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
+0.3.8 MK2.5/3/S FW update
-0.3.3 Prusament PETG released
+0.3.7 MK2/S/MMU FW update
-0.3.2 New MK2.5 and MK3 FW versions
+0.3.6 Updated firmware versions for MK2.5 and MK3
-0.3.1 New MK2.5 and MK3 FW versions
+0.3.5 New MK2.5 and MK3 FW versions
-0.3.0 New MK2.5 and MK3 FW version
+0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
-min_slic3r_version = 1.41.0-alpha
+0.3.3 Prusament PETG released
-0.2.9 New MK2.5 and MK3 FW versions
+0.3.2 New MK2.5 and MK3 FW versions
-0.2.8 New MK2.5 and MK3 FW version
+0.3.1 New MK2.5 and MK3 FW versions
-min_slic3r_version = 1.41.1
+0.3.0 New MK2.5 and MK3 FW version
-0.2.7 New MK2.5 and MK3 FW version
+min_slic3r_version = 1.41.0-alpha
-0.2.6 Added MMU2 MK2.5 settings
+0.2.9 New MK2.5 and MK3 FW versions
-min_slic3r_version = 1.41.0-alpha
+0.2.8 New MK2.5 and MK3 FW version
-0.2.5 Prusament is out - added prusament settings
+min_slic3r_version = 1.41.1
-0.2.4 Added soluble support profiles for MMU2
+0.2.7 New MK2.5 and MK3 FW version
-0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
+0.2.6 Added MMU2 MK2.5 settings
-0.2.2 Edited MMU2 Single mode purge line
+min_slic3r_version = 1.41.0-alpha
-0.2.1 Added PET and BVOH settings for MMU2
+0.2.5 Prusament is out - added prusament settings
-0.2.0-beta5 Fixed MMU1 ramming parameters
+0.2.4 Added soluble support profiles for MMU2
-0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
+0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
-0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
+0.2.2 Edited MMU2 Single mode purge line
-0.2.0-beta2 Edited first layer speed and wipe tower position
+0.2.1 Added PET and BVOH settings for MMU2
-0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
+0.2.0-beta5 Fixed MMU1 ramming parameters
-0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
+0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
-0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
+0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
-0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
+0.2.0-beta2 Edited first layer speed and wipe tower position
-0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
+0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
-0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
+0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
-0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
+0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
-0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
+0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
-0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
+0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
-0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
+0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
-min_slic3r_version = 1.40.0
+0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
-0.1.18 Updated firmware version
+0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
-0.1.17 Updated firmware version for MK2.5/S and MK3/S
+0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
-0.1.16 MK2.5/3/S FW update
+0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
-0.1.15 MK2/S/MMU FW update
+min_slic3r_version = 1.40.0
-0.1.14 Updated firmware versions for MK2.5 and MK3
+0.1.18 Updated firmware version
-0.1.13 New MK2.5 and MK3 FW versions
+0.1.17 Updated firmware version for MK2.5/S and MK3/S
-0.1.12 New MK2.5 and MK3 FW versions
+0.1.16 MK2.5/3/S FW update
-0.1.11 fw version changed to 3.3.1
+0.1.15 MK2/S/MMU FW update
-0.1.10 MK3 jerk and acceleration update
+0.1.14 Updated firmware versions for MK2.5 and MK3
-0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
+0.1.13 New MK2.5 and MK3 FW versions
-0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
+0.1.12 New MK2.5 and MK3 FW versions
-0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
+0.1.11 fw version changed to 3.3.1
-0.1.6 Split the MK2.5 profile from the MK2S
+0.1.10 MK3 jerk and acceleration update
-min_slic3r_version = 1.40.0-beta
+0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
-0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
+0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
-0.1.4 edited fw version, added z-raise after print
+0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
-min_slic3r_version = 1.40.0-alpha
+0.1.6 Split the MK2.5 profile from the MK2S
-0.1.3 Fixed an incorrect position of the max_print_height parameter
+min_slic3r_version = 1.40.0-beta
-0.1.2 Wipe tower changes
+0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
-0.1.1 Minor print speed adjustments
+0.1.4 edited fw version, added z-raise after print
-0.1.0 Initial
+min_slic3r_version = 1.40.0-alpha
+0.1.3 Fixed an incorrect position of the max_print_height parameter
+0.1.2 Wipe tower changes
+0.1.1 Minor print speed adjustments
+0.1.0 Initial

resources/profiles/PrusaResearch.ini

@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.2.0-alpha0
+config_version = 1.2.0-beta0
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -18,7 +18,7 @@ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 
 [printer_model:MINI]
-name = Original Prusa MINI
+name = Original Prusa MINI && MINI+
 variants = 0.4; 0.25; 0.6
 technology = FFF
 family = MINI
@@ -27,7 +27,7 @@ bed_texture = mini.svg
 default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI
 
 [printer_model:MK3S]
-name = Original Prusa i3 MK3S
+name = Original Prusa i3 MK3S && MK3S+
 variants = 0.4; 0.25; 0.6
 technology = FFF
 family = MK3
@@ -45,7 +45,7 @@ bed_texture = mk3.svg
 default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend
 
 [printer_model:MK3SMMU2S]
-name = Original Prusa i3 MK3S MMU2S
+name = Original Prusa i3 MK3S && MK3S+ MMU2S
 variants = 0.4; 0.25; 0.6
 technology = FFF
 family = MK3
@@ -228,6 +228,8 @@ wipe_tower_y = 140
 xy_size_compensation = 0
 top_solid_min_thickness = 0.6
 bottom_solid_min_thickness = 0.5
+infill_anchor = 2.5
+infill_anchor_max = 12
 
 [print:*MK3*]
 fill_pattern = grid
@@ -356,6 +358,7 @@ support_material_extrusion_width = 0.55
 support_material_contact_distance = 0.15
 support_material_xy_spacing = 80%
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+infill_anchor_max = 15
 
 [print:*0.6nozzleMK3*]
 external_perimeter_extrusion_width = 0.65
@@ -371,6 +374,7 @@ bridge_speed = 25
 support_material_contact_distance = 0.15
 support_material_xy_spacing = 80%
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+infill_anchor_max = 15
 
 [print:*0.6nozzleMINI*]
 external_perimeter_extrusion_width = 0.65
@@ -395,6 +399,7 @@ first_layer_acceleration = 1000
 default_acceleration = 1250
 support_material_speed = 40
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+infill_anchor_max = 15
 
 [print:*soluble_support*]
 overhangs = 1
@@ -1433,7 +1438,7 @@ filament_notes = ""
 filament_settings_id = ""
 filament_soluble = 0
 min_print_speed = 15
-slowdown_below_layer_time = 20
+slowdown_below_layer_time = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"
 
 [filament:*PLA*]
@@ -1517,6 +1522,7 @@ filament_retract_lift = nil
 filament_retract_before_travel = 3
 filament_wipe = 0
 filament_max_volumetric_speed = 10
+slowdown_below_layer_time = 20
 compatible_printers_condition = printer_model=="MINI"
 start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode"
 
@@ -1617,6 +1623,7 @@ compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.
 extrusion_multiplier = 1.2
 filament_cost = 49.99
 filament_density = 3.9
+filament_spool_weight = 236
 filament_colour = #804040
 filament_max_volumetric_speed = 9
 
@@ -1627,6 +1634,7 @@ compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.
 extrusion_multiplier = 1.2
 filament_cost = 49.99
 filament_density = 3.13
+filament_spool_weight = 236
 filament_colour = #808080
 filament_max_volumetric_speed = 8
 
@@ -1637,6 +1645,7 @@ compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.
 extrusion_multiplier = 1.2
 filament_cost = 72.89
 filament_density = 3.9
+filament_spool_weight = 236
 filament_colour = #82603E
 filament_max_volumetric_speed = 9
 
@@ -1651,6 +1660,7 @@ fan_always_on = 0
 fan_below_layer_time = 10
 filament_cost = 65.66
 filament_density = 1.18
+filament_spool_weight = 236
 first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
@@ -1663,6 +1673,7 @@ inherits = *PLA*
 filament_vendor = ColorFabb
 filament_cost = 52.46
 filament_density = 1.24
+filament_spool_weight = 236
 
 [filament:ColorFabb woodFill]
 inherits = *PLA*
@@ -1671,6 +1682,7 @@ compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.
 extrusion_multiplier = 1.1
 filament_cost = 38.99
 filament_density = 1.15
+filament_spool_weight = 236
 filament_colour = #dfc287
 filament_max_volumetric_speed = 9
 first_layer_temperature = 200
@@ -1685,6 +1697,7 @@ compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.
 extrusion_multiplier = 1.1
 filament_cost = 38.99
 filament_density = 1.18
+filament_spool_weight = 236
 filament_colour = #634d33
 filament_max_volumetric_speed = 6
 first_layer_temperature = 220
@@ -1697,6 +1710,7 @@ inherits = *PET*
 filament_vendor = ColorFabb
 filament_cost = 38.99
 filament_density = 1.27
+filament_spool_weight = 236
 first_layer_bed_temperature = 90
 first_layer_temperature = 260
 temperature = 270
@@ -1707,6 +1721,7 @@ filament_vendor = ColorFabb
 extrusion_multiplier = 1.05
 filament_cost = 49.99
 filament_density = 1.35
+filament_spool_weight = 236
 filament_colour = #804040
 filament_max_volumetric_speed = 2
 first_layer_bed_temperature = 90
@@ -1715,12 +1730,14 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no
 temperature = 260
 filament_retract_length = nil
 filament_retract_lift = 0.4
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
 [filament:ColorFabb nGen]
 inherits = *PET*
 filament_vendor = ColorFabb
 filament_cost = 52.46
 filament_density = 1.2
+filament_spool_weight = 236
 bridge_fan_speed = 40
 fan_always_on = 0
 fan_below_layer_time = 10
@@ -1734,6 +1751,7 @@ inherits = *FLEX*
 filament_vendor = ColorFabb
 filament_cost = 58.30
 filament_density = 1
+filament_spool_weight = 236
 bed_temperature = 85
 bridge_fan_speed = 40
 cooling = 1
@@ -1764,6 +1782,7 @@ temperature = 240
 filament_retract_length = nil
 filament_retract_lift = 0.3
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
 [filament:Kimya ABS Carbon]
 inherits = *ABSC*
@@ -1774,16 +1793,12 @@ filament_colour = #804040
 filament_max_volumetric_speed = 6
 first_layer_temperature = 260
 temperature = 260
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
 [filament:Kimya ABS Kevlar]
-inherits = *ABSC*
+inherits = Kimya ABS Carbon
 filament_vendor = Kimya
-filament_cost = 140.4
 filament_density = 1.037
-filament_colour = #804040
-filament_max_volumetric_speed = 6
-first_layer_temperature = 260
-temperature = 260
 
 [filament:E3D Edge]
 inherits = *PET*
@@ -1971,13 +1986,14 @@ inherits = *ABSC*
 filament_vendor = Esun
 filament_cost = 27.82
 filament_density = 1.04
+filament_spool_weight = 265
 
 [filament:Hatchbox ABS]
 inherits = *ABSC*
 filament_vendor = Hatchbox
 filament_cost = 27.82
 filament_density = 1.04
-filament_spool_weight = 225
+filament_spool_weight = 245
 
 [filament:Plasty Mladec ABS]
 inherits = *ABSC*
@@ -1991,6 +2007,7 @@ inherits = *ABSC*
 filament_vendor = Verbatim
 filament_cost = 25.87
 filament_density = 1.05
+filament_spool_weight = 235
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{else}M900 K20{endif} ; Filament gcode LA 1.0"
 
 [filament:Generic PETG]
@@ -2018,12 +2035,14 @@ inherits = *PLA*
 filament_vendor = Devil Design
 filament_cost = 20.99
 filament_density = 1.24
+filament_spool_weight = 250
 
 [filament:Devil Design PETG]
 inherits = *PET*
 filament_vendor = Devil Design
 filament_cost = 20.99
 filament_density = 1.23
+filament_spool_weight = 250
 first_layer_temperature = 230
 first_layer_bed_temperature = 85
 temperature = 230
@@ -2313,6 +2332,7 @@ inherits = *PET*
 filament_vendor = Verbatim
 filament_cost = 27.90
 filament_density = 1.27
+filament_spool_weight = 235
 compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
 [filament:Fiberlogy PETG]
@@ -2370,6 +2390,7 @@ temperature = 230
 bed_temperature = 90
 filament_cost = 20.99
 filament_density = 1.23
+filament_spool_weight = 250
 filament_type = PETG
 
 [filament:Verbatim PETG @0.6 nozzle]
@@ -2379,6 +2400,7 @@ first_layer_temperature = 230
 temperature = 240
 filament_cost = 27.90
 filament_density = 1.27
+filament_spool_weight = 235
 filament_type = PETG
 
 [filament:Fiberlogy PETG @0.6 nozzle]
@@ -2489,18 +2511,26 @@ filament_vendor = AmazonBasics
 filament_cost = 25.4
 filament_density = 1.24
 
+[filament:Overture PLA]
+inherits = *PLA*
+filament_vendor = Overture
+filament_cost = 22
+filament_density = 1.24
+filament_spool_weight = 235
+
 [filament:Hatchbox PLA]
 inherits = *PLA*
 filament_vendor = Hatchbox
 filament_cost = 25.4
 filament_density = 1.24
-filament_spool_weight = 225
+filament_spool_weight = 245
 
 [filament:Esun PLA]
 inherits = *PLA*
 filament_vendor = Esun
 filament_cost = 25.4
 filament_density = 1.24
+filament_spool_weight = 265
 
 [filament:Das Filament PLA]
 inherits = *PLA*
@@ -2636,6 +2666,75 @@ min_fan_speed = 0
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{else}M900 K48{endif} ; Filament gcode LA 1.0"
 temperature = 250
 
+[filament:Fiberthree F3 PA Pure Pro]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 165.98
+filament_density = 1.2
+bed_temperature = 70
+first_layer_bed_temperature = 75
+first_layer_temperature = 270
+temperature = 270
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 5
+filament_soluble = 0
+filament_type = NYLON
+max_fan_speed = 20
+min_fan_speed = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+filament_retract_length = 2
+filament_retract_speed = 40
+filament_retract_lift = nil
+filament_retract_before_travel = 1.5
+filament_wipe = 0
+compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Fiberthree F3 PA-CF Pro]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 171.98
+filament_density = 1.25
+bed_temperature = 70
+first_layer_bed_temperature = 75
+first_layer_temperature = 275
+temperature = 275
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 5
+filament_soluble = 0
+filament_type = NYLON
+max_fan_speed = 0
+min_fan_speed = 0
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+filament_retract_length = 2
+filament_retract_speed = 40
+filament_retract_lift = nil
+filament_retract_before_travel = 1.5
+filament_wipe = 0
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Fiberthree F3 PA-GF Pro]
+inherits = Fiberthree F3 PA-CF Pro
+filament_vendor = Fiberthree
+filament_cost = 169.98
+filament_density = 1.27
+fan_always_on = 1
+max_fan_speed = 15
+min_fan_speed = 15
+
 [filament:Taulman T-Glase]
 inherits = *PET*
 filament_vendor = Taulman
@@ -2655,12 +2754,14 @@ inherits = *PLA*
 filament_vendor = Verbatim
 filament_cost = 42.99
 filament_density = 1.24
+filament_spool_weight = 235
 
 [filament:Verbatim BVOH]
 inherits = *common*
 filament_vendor = Verbatim
 filament_cost = 79.99
 filament_density = 1.23
+filament_spool_weight = 235
 bed_temperature = 60
 bridge_fan_speed = 100
 cooling = 0
@@ -2742,6 +2843,7 @@ inherits = *common*
 filament_vendor = Verbatim
 filament_cost = 72
 filament_density = 0.89
+filament_spool_weight = 235
 bed_temperature = 100
 bridge_fan_speed = 100
 cooling = 1
@@ -2772,6 +2874,7 @@ fan_always_on = 0
 fan_below_layer_time = 10
 filament_cost = 58.66
 filament_density = 1.18
+filament_spool_weight = 236
 first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
@@ -2785,6 +2888,7 @@ filament_vendor = ColorFabb
 filament_type = PETG
 filament_cost = 38.99
 filament_density = 1.27
+filament_spool_weight = 236
 first_layer_bed_temperature = 90
 first_layer_temperature = 260
 temperature = 270
@@ -2792,10 +2896,11 @@ temperature = 270
 [filament:ColorFabb XT-CF20 @MMU1]
 inherits = *PETMMU1*
 filament_vendor = ColorFabb
-compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MK2SMM"
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
 extrusion_multiplier = 1.05
 filament_cost = 49.99
 filament_density = 1.35
+filament_spool_weight = 236
 filament_colour = #804040
 filament_max_volumetric_speed = 2
 first_layer_bed_temperature = 90
@@ -2808,6 +2913,7 @@ inherits = *PETMMU1*
 filament_vendor = ColorFabb
 filament_cost = 21.2
 filament_density = 1.2
+filament_spool_weight = 236
 bridge_fan_speed = 40
 fan_always_on = 0
 fan_below_layer_time = 10
@@ -2848,6 +2954,7 @@ inherits = *PETMMU1*
 filament_vendor = Devil Design
 filament_cost = 20.99
 filament_density = 1.23
+filament_spool_weight = 250
 first_layer_temperature = 230
 first_layer_bed_temperature = 85
 temperature = 230
@@ -2865,6 +2972,7 @@ inherits = *PETMMU1*
 filament_vendor = Verbatim
 filament_cost = 27.90
 filament_density = 1.27
+filament_spool_weight = 235
 
 [filament:Fiberlogy PETG @MMU1]
 inherits = *PETMMU1*
@@ -2904,6 +3012,65 @@ max_fan_speed = 5
 min_fan_speed = 0
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 
+[filament:Fiberthree F3 PA Pure Pro @MMU1]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 165.98
+filament_density = 1.2
+bed_temperature = 70
+first_layer_bed_temperature = 75
+first_layer_temperature = 270
+temperature = 270
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 4
+filament_soluble = 0
+filament_type = NYLON
+max_fan_speed = 20
+min_fan_speed = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = printer_model=="MK2SMM"
+
+[filament:Fiberthree F3 PA-CF Pro @MMU1]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 171.98
+filament_density = 1.25
+bed_temperature = 70
+first_layer_bed_temperature = 75
+first_layer_temperature = 275
+temperature = 275
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 4
+filament_soluble = 0
+filament_type = NYLON
+max_fan_speed = 0
+min_fan_speed = 0
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
+
+[filament:Fiberthree F3 PA-GF Pro @MMU1]
+inherits = Fiberthree F3 PA-CF Pro @MMU1
+filament_vendor = Fiberthree
+filament_cost = 169.98
+filament_density = 1.27
+fan_always_on = 1
+max_fan_speed = 15
+min_fan_speed = 15
+
 [filament:SemiFlex or Flexfill 98A @MMU1]
 inherits = *FLEX*
 filament_vendor = Generic
@@ -2941,6 +3108,7 @@ inherits = Generic PETG; *PETMINI*
 filament_vendor = Devil Design
 filament_cost = 20.99
 filament_density = 1.23
+filament_spool_weight = 250
 first_layer_temperature = 230
 first_layer_bed_temperature = 85
 temperature = 230
@@ -2960,6 +3128,7 @@ inherits = Generic PETG; *PETMINI*
 filament_vendor = Verbatim
 filament_cost = 27.90
 filament_density = 1.27
+filament_spool_weight = 235
 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
 
 [filament:Fiberlogy PETG @MINI]
@@ -2978,11 +3147,69 @@ fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
 
+[filament:Fiberthree F3 PA Pure Pro @MINI]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 165.98
+filament_density = 1.2
+bed_temperature = 70
+first_layer_bed_temperature = 75
+first_layer_temperature = 270
+temperature = 270
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 4
+filament_soluble = 0
+filament_type = NYLON
+max_fan_speed = 20
+min_fan_speed = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:Fiberthree F3 PA-CF Pro @MINI]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 171.98
+filament_density = 1.25
+bed_temperature = 70
+first_layer_bed_temperature = 75
+first_layer_temperature = 275
+temperature = 275
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 4
+filament_soluble = 0
+filament_type = NYLON
+max_fan_speed = 0
+min_fan_speed = 0
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
+
+[filament:Fiberthree F3 PA-GF Pro @MINI]
+inherits = Fiberthree F3 PA-CF Pro @MINI
+filament_vendor = Fiberthree
+filament_cost = 169.98
+filament_density = 1.27
+fan_always_on = 1
+max_fan_speed = 15
+min_fan_speed = 15
+
 [filament:Kimya ABS Carbon @MINI]
 inherits = *ABSMINI*
 filament_vendor = Kimya
@@ -2992,27 +3219,23 @@ filament_colour = #804040
 filament_max_volumetric_speed = 6
 first_layer_temperature = 260
 temperature = 260
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
 
 [filament:Kimya ABS Kevlar @MINI]
-inherits = *ABSMINI*
+inherits = Kimya ABS Carbon @MINI
 filament_vendor = Kimya
-filament_cost = 140.4
 filament_density = 1.037
-filament_colour = #804040
-filament_max_volumetric_speed = 6
-first_layer_temperature = 260
-temperature = 260
 
 [filament:Esun ABS @MINI]
 inherits = Generic ABS; *ABSMINI*
 filament_vendor = Esun
 filament_cost = 27.82
 filament_density = 1.08
+filament_spool_weight = 265
 fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
@@ -3022,12 +3245,11 @@ inherits = Generic ABS; *ABSMINI*
 filament_vendor = Hatchbox
 filament_cost = 27.82
 filament_density = 1.08
-filament_spool_weight = 225
+filament_spool_weight = 245
 fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
@@ -3042,7 +3264,6 @@ fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
@@ -3052,11 +3273,11 @@ inherits = Generic ABS; *ABSMINI*
 filament_vendor = Verbatim
 filament_cost = 25.87
 filament_density = 1.05
+filament_spool_weight = 235
 fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
@@ -3084,6 +3305,7 @@ first_layer_temperature = 240
 temperature = 240
 filament_retract_length = nil
 filament_retract_lift = 0.3
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
 
 [filament:Prusament PETG @0.6 nozzle MINI]
 inherits = Prusament PETG; *PETMINI06*
@@ -3106,6 +3328,7 @@ temperature = 230
 bed_temperature = 90
 filament_cost = 20.99
 filament_density = 1.23
+filament_spool_weight = 250
 
 [filament:Plasty Mladec PETG @0.6 nozzle MINI]
 inherits = Generic PETG; *PETMINI06*
@@ -3115,6 +3338,7 @@ filament_spool_weight = 230
 [filament:Verbatim PETG @0.6 nozzle MINI]
 inherits = Generic PETG; *PETMINI06*
 filament_vendor = Verbatim
+filament_spool_weight = 235
 
 [filament:Fiberlogy PETG @0.6 nozzle MINI]
 inherits = Generic PETG; *PETMINI06*
@@ -3250,6 +3474,7 @@ filament_spool_weight = 230
 inherits = ColorFabb nGen; *PETMINI*
 filament_cost = 52.46
 filament_density = 1.2
+filament_spool_weight = 236
 
 [filament:E3D PC-ABS @MINI]
 inherits = E3D PC-ABS; *ABSMINI*
@@ -3265,7 +3490,6 @@ fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
@@ -3318,7 +3542,6 @@ min_fan_speed = 20
 max_fan_speed = 20
 bridge_fan_speed = 30
 min_print_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 filament_type = PC
@@ -3341,7 +3564,6 @@ fan_always_on = 0
 cooling = 1
 min_fan_speed = 15
 max_fan_speed = 15
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
@@ -3375,6 +3597,7 @@ fan_always_on = 0
 fan_below_layer_time = 10
 filament_cost = 58.66
 filament_density = 1.18
+filament_spool_weight = 236
 first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 20
@@ -3387,6 +3610,7 @@ filament_vendor = ColorFabb
 filament_type = PETG
 filament_cost = 38.99
 filament_density = 1.27
+filament_spool_weight = 236
 first_layer_bed_temperature = 90
 first_layer_temperature = 260
 temperature = 270
@@ -3394,10 +3618,11 @@ temperature = 270
 [filament:ColorFabb XT-CF20 @MINI]
 inherits = *PETMINI*
 filament_vendor = ColorFabb
-compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
 extrusion_multiplier = 1.05
 filament_cost = 49.99
 filament_density = 1.35
+filament_spool_weight = 236
 filament_colour = #804040
 filament_max_volumetric_speed = 2
 first_layer_bed_temperature = 90
@@ -3825,6 +4050,27 @@ initial_exposure_time = 35
 material_type = Tough
 material_vendor = Made for Prusa
 
+[sla_material:Prusa Rich Black Tough @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Deep Blue Transparent Tough @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Yellow Jewelry Casting @0.025]
+inherits = *common 0.025*
+exposure_time = 8
+initial_exposure_time = 45
+material_type = Casting
+material_vendor = Made for Prusa
+
 [sla_material:Siraya Tech Simple Clear @0.025]
 inherits = *common 0.025*
 exposure_time = 8
@@ -4582,6 +4828,20 @@ initial_exposure_time = 35
 material_type = Tough
 material_vendor = Made for Prusa
 
+[sla_material:Prusa Rich Black Tough @0.05]
+inherits = *common 0.05*
+exposure_time = 8
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Deep Blue Transparent Tough @0.05]
+inherits = *common 0.05*
+exposure_time = 8
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Made for Prusa
+
 ########### Materials 0.035
 
 [sla_material:Prusa Orange Tough @0.035]
@@ -5106,18 +5366,21 @@ min_layer_height = 0.15
 printer_variant = 0.6
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
-[printer:Original Prusa i3 MK3S]
+[printer:Original Prusa i3 MK3S & MK3S+]
 inherits = Original Prusa i3 MK3
+renamed_from = "Original Prusa i3 MK3S"
 printer_model = MK3S
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 
-[printer:Original Prusa i3 MK3S 0.25 nozzle]
+[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
 inherits = Original Prusa i3 MK3 0.25 nozzle
+renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
 printer_model = MK3S
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 
-[printer:Original Prusa i3 MK3S 0.6 nozzle]
+[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
 inherits = Original Prusa i3 MK3 0.6 nozzle
+renamed_from = "Original Prusa i3 MK3S 0.6 nozzle"
 printer_model = MK3S
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 
@@ -5184,15 +5447,17 @@ extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
 
-[printer:Original Prusa i3 MK3S MMU2S Single]
+[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
 inherits = *mm2s*
+renamed_from = "Original Prusa i3 MK3S MMU2S Single"
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
 
-[printer:Original Prusa i3 MK3S MMU2S Single 0.6 nozzle]
+[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
-inherits = Original Prusa i3 MK3S MMU2S Single
+inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
+renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.6 nozzle"
 single_extruder_multi_material = 0
 nozzle_diameter = 0.6
 max_layer_height = 0.40
@@ -5201,8 +5466,9 @@ printer_variant = 0.6
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
-[printer:Original Prusa i3 MK3S MMU2S Single 0.25 nozzle]
+[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle]
-inherits = Original Prusa i3 MK3S MMU2S Single
+inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
+renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.25 nozzle"
 single_extruder_multi_material = 0
 nozzle_diameter = 0.25
 max_layer_height = 0.15
@@ -5212,8 +5478,9 @@ retract_lift = 0.15
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
 
-[printer:Original Prusa i3 MK3S MMU2S]
+[printer:Original Prusa i3 MK3S & MK3S+ MMU2S]
 inherits = *mm2s*
+renamed_from = "Original Prusa i3 MK3S MMU2S"
 machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
@@ -5222,8 +5489,9 @@ end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG
 
 ## 0.6mm nozzle MMU2/S printer profiles
 
-[printer:Original Prusa i3 MK3S MMU2S 0.6 nozzle]
+[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle]
-inherits = Original Prusa i3 MK3S MMU2S
+inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
+renamed_from = "Original Prusa i3 MK3S MMU2S 0.6 nozzle"
 nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
@@ -5242,8 +5510,9 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
 ## MINI
 
-[printer:Original Prusa MINI]
+[printer:Original Prusa MINI & MINI+]
 inherits = *common*
+renamed_from = "Original Prusa MINI"
 printer_model = MINI
 printer_technology = FFF
 printer_variant = 0.4
@@ -5286,12 +5555,13 @@ retract_layer_change = 0
 silent_mode = 0
 remaining_times = 1
 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
-end_gcode = G1 E-1 F2100 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y180 F4200 ; park print head\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
+end_gcode = G1 E-1 F2100 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
 extruder_colour = 
 
-[printer:Original Prusa MINI 0.25 nozzle]
+[printer:Original Prusa MINI & MINI+ 0.25 nozzle]
-inherits = Original Prusa MINI
+inherits = Original Prusa MINI & MINI+
+renamed_from = "Original Prusa MINI 0.25 nozzle"
 printer_variant = 0.25
 nozzle_diameter = 0.25
 max_layer_height = 0.15
@@ -5299,26 +5569,18 @@ min_layer_height = 0.05
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI
 retract_length = 3
 retract_lift = 0.15
-retract_speed = 70
-deretract_speed = 40
-wipe = 1
-retract_before_wipe = 70%
 retract_before_travel = 1
 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
 
-[printer:Original Prusa MINI 0.6 nozzle]
+[printer:Original Prusa MINI & MINI+ 0.6 nozzle]
-inherits = Original Prusa MINI
+inherits = Original Prusa MINI & MINI+
+renamed_from = "Original Prusa MINI 0.6 nozzle"
 printer_variant = 0.6
 nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
 retract_length = 3.5
-retract_lift = 0.2
-retract_speed = 70
-deretract_speed = 40
-wipe = 1
-retract_before_wipe = 70%
 retract_before_travel = 1.5
 
 [printer:Original Prusa SL1]