updated indexes and inis

resources/profiles/Anker.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha4
 1.1.3 Fixed top solid infill extrusion width for M5C.
 1.1.2 Added AnkerMake M5C.

resources/profiles/Anker.ini

@@ -6,15 +6,16 @@ repo_id = non-prusa-fff
 name = AnkerMake
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.1.3
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anker/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anker/
 [printer_model:M5]
 name = AnkerMake M5
 variants = 0.4

resources/profiles/Anycubic.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-beta1
 0.2.8 Fixed compatible printer condition.
 0.2.7 Fixed compatible condition for MONO X.

resources/profiles/Anycubic.ini

@@ -6,15 +6,16 @@ repo_id = non-prusa-fff
 name = Anycubic
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.2.8
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anycubic/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anycubic/
 [printer_model:AKLP]
 name = Anycubic Kossel Linear Plus
 variants = 0.4
@@ -24,6 +25,7 @@ bed_model = AKLP_Bed.stl
 bed_texture = AK.svg
 default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
 
+thumbnail = AKLP_thumbnail.png
 [printer_model:AK]
 name = Anycubic Kossel Pulley (Linear)
 variants = 0.4
@@ -33,6 +35,7 @@ bed_model = AK_Bed.stl
 bed_texture = AK.svg
 default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
 
+thumbnail = AK_thumbnail.png
 [printer_model:MEGA0]
 name = Anycubic Mega Zero
 variants = 0.4
@@ -42,6 +45,7 @@ bed_model = mega0_bed.stl
 bed_texture = mega0.svg
 default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0
 
+thumbnail = MEGA0_thumbnail.png
 [printer_model:I3MEGA]
 name = Anycubic i3 Mega
 variants = 0.4
@@ -50,6 +54,7 @@ family = MEGA
 bed_model = i3megas_bed.stl
 bed_texture = i3megas.svg
 
+thumbnail = I3MEGA_thumbnail.png
 [printer_model:I3MEGAS]
 name = Anycubic i3 Mega S
 variants = 0.4
@@ -58,6 +63,7 @@ family = MEGA
 bed_model = i3megas_bed.stl
 bed_texture = i3megas.svg
 
+thumbnail = I3MEGAS_thumbnail.png
 [printer_model:4MAXPRO20]
 name = Anycubic 4Max Pro 2.0
 variants = 0.4
@@ -67,6 +73,7 @@ bed_model = 4MAXPRO20_bed.stl
 bed_texture = 4MAXPRO20_texture.svg
 default_materials = Generic PLA @4Max Pro 2.0; Generic TPU @4Max Pro 2.0; Generic ABS @4Max Pro 2.0
 
+thumbnail = 4MAXPRO20_thumbnail.png
 [printer_model:PREDATOR]
 name = Anycubic Predator
 variants = 0.4; 0.6; 0.8
@@ -74,34 +81,6 @@ technology = FFF
 family = PREDATOR
 default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR
 
-[printer_model:PHOTON MONO]
-name = Photon Mono
-variants = default
-technology = SLA
-family = PHOTON MONO
-default_materials = Generic Blue Resin @MONO 0.05
-
-[printer_model:PHOTON MONO X]
-name = Photon Mono X
-variants = default
-technology = SLA
-family = PHOTON MONO
-default_materials = Generic Blue Resin @MONO 0.05
-
-[printer_model:PHOTON MONO X 6K]
-name = Photon Mono X 6K
-variants = default
-technology = SLA
-family = PHOTON MONO
-default_materials = Anycubic Plant-based UV Resin Grey 23 @MONO 0.05
-
-[printer_model:PHOTON MONO SE]
-name = Photon Mono SE
-variants = default
-technology = SLA
-family = PHOTON MONO
-default_materials = Generic Blue Resin @MONO 0.05
-
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
@@ -110,6 +89,7 @@ default_materials = Generic Blue Resin @MONO 0.05
 ## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220
 
 # Common print preset
+thumbnail = PREDATOR_thumbnail.png
 [print:*common_akossel*]
 avoid_crossing_perimeters = 0
 bottom_solid_min_thickness = 0.5
@@ -2345,228 +2325,3 @@ use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 0
 z_offset = 0
-
-## SLA printers
-
-[sla_print:*common print ANYCUBIC SLA*]
-compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 
-layer_height = 0.05
-pad_edge_radius = 0.5
-pad_enable = 1
-pad_max_merge_distance = 50
-pad_wall_height = 0
-pad_wall_thickness = 1
-pad_wall_slope = 45
-faded_layers = 8
-slice_closing_radius = 0.005
-support_base_diameter = 3
-support_base_height = 1
-support_critical_angle = 45
-support_density_at_45 = 250
-support_density_at_horizontal = 500
-support_head_front_diameter = 0.4
-support_head_penetration = 0.4
-support_head_width = 3
-support_max_bridge_length = 10
-support_minimal_z = 0
-support_object_elevation = 5
-support_pillar_diameter = 1
-support_pillar_connection_mode = zigzag
-support_pillar_widening_factor = 0
-supports_enable = 1
-support_small_pillar_diameter_percent = 60%
-
-[sla_print:0.05 Normal @ANYCUBIC ABSTRACT]
-inherits = *common print ANYCUBIC SLA*
-compatible_printers_condition = printer_notes=~/.*ABSTRACT_ONLY.*/
-layer_height = 0.05
-
-[sla_print:0.05 Normal @ANYCUBIC MONO]
-inherits = 0.05 Normal @ANYCUBIC ABSTRACT
-compatible_printers_condition = printer_notes=~/.*PHOTONMONO\n.*/
-output_filename_format = [input_filename_base].pwmo
-
-[sla_print:0.05 Normal @ANYCUBIC MONO X]
-inherits = 0.05 Normal @ANYCUBIC ABSTRACT
-compatible_printers_condition = printer_notes=~/.*PHOTONMONOX\n.*/
-output_filename_format = [input_filename_base].pwmx
-
-[sla_print:0.05 Normal @ANYCUBIC MONO X 6K]
-inherits = 0.05 Normal @ANYCUBIC ABSTRACT
-compatible_printers_condition = printer_notes=~/.*PHOTONMONOX6K\n.*/
-output_filename_format = [input_filename_base].pwmx
-
-[sla_print:0.05 Normal @ANYCUBIC MONO SE]
-inherits = 0.05 Normal @ANYCUBIC ABSTRACT
-compatible_printers_condition = printer_notes=~/.*PHOTONMONOSE\n.*/
-output_filename_format = [input_filename_base].pwms
-
-
-## SLA materials
-
-#MONO series printer need a significantly reduced exposure time but are otherwise compatible
-[sla_material:*common ANYCUBIC SLA*]
-compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 
-compatible_prints_condition = layer_height == 0.05
-exposure_time = 7
-initial_exposure_time = 40
-initial_layer_height = 0.05
-material_correction = 1,1,1
-material_notes = #Distances are defined in mm, speeds are defined in mm/s.\n#Delay is defined in s.\nLIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5\nANTIALIASING=1
-
-[sla_material:*common 0.05 ANYCUBIC SLA*]
-inherits = *common ANYCUBIC SLA*
-
-[sla_material:Generic Blue Resin @MONO 0.05]
-inherits = *common 0.05 ANYCUBIC SLA*
-exposure_time = 2.5
-initial_exposure_time = 40
-material_type = Tough
-material_vendor = Generic
-material_colour = #6080EC
-compatible_printers_condition = printer_notes=~/.*MONO.*/ and printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 
-
-[sla_material:Anycubic Plant-based UV Resin Grey 23 @MONO 0.05]
-inherits = *common 0.05 ANYCUBIC SLA*
-exposure_time = 2.3
-initial_exposure_time = 23
-material_type = Plant-Based
-material_vendor = Anycubic
-material_colour = #808080
-compatible_printers_condition = printer_model=="PHOTON MONO X 6K"
-material_notes = LIFT_SPEED=2
-
-[sla_material:Anycubic Plant-based UV Resin Grey 28 @MONO 0.05]
-inherits = *common 0.05 ANYCUBIC SLA*
-exposure_time = 2
-initial_exposure_time = 28
-material_type = Plant-Based
-material_vendor = Anycubic
-material_colour = #808080
-compatible_printers_condition = printer_model=="PHOTON MONO X"
-material_notes = LIFT_SPEED=2
-
-[sla_material:Anycubic Plant-based UV Resin Grey 30 @MONO 0.05]
-inherits = *common 0.05 ANYCUBIC SLA*
-exposure_time = 2
-initial_exposure_time = 30
-material_type = Plant-Based
-material_vendor = Anycubic
-material_colour = #808080
-compatible_printers_condition = printer_model=="PHOTON MONO SE"
-material_notes = LIFT_SPEED=2
-
-## Printers
-
-[printer:Anycubic Photon Mono]
-printer_technology = SLA
-printer_model = PHOTON MONO
-printer_variant = default
-default_sla_material_profile = Generic Blue Resin @MONO 0.05
-default_sla_print_profile = 0.05 Normal @ANYCUBIC
-thumbnails = 224x168
-sla_archive_format = pwmo
-bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
-display_orientation = landscape
-display_mirror_x = 1
-display_mirror_y = 0
-display_pixels_x = 1620
-display_pixels_y = 2560
-display_width = 82.62
-display_height = 130.56
-max_print_height = 165
-elefant_foot_compensation = 0.2
-elefant_foot_min_width = 0.2
-min_exposure_time = 0.8
-max_exposure_time = 120
-min_initial_exposure_time = 0.8
-max_initial_exposure_time = 300
-printer_correction = 1,1,1
-gamma_correction = 1
-area_fill = 50
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONO\nPRINTER_TECHNOLOGY_SLA\n
-
-[printer:Anycubic Photon Mono SE]
-printer_technology = SLA
-printer_model = PHOTON MONO SE
-printer_variant = default
-default_sla_material_profile = Generic Blue Resin @MONO 0.05
-default_sla_print_profile = 0.05 Normal @ANYCUBIC
-thumbnails = 224x168
-sla_archive_format = pwms
-bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
-display_orientation = landscape
-display_mirror_x = 1
-display_mirror_y = 0
-display_pixels_x = 1620
-display_pixels_y = 2560
-display_width = 82.62
-display_height = 130.56
-max_print_height = 160
-elefant_foot_compensation = 0.2
-elefant_foot_min_width = 0.2
-min_exposure_time = 0.8
-max_exposure_time = 120
-min_initial_exposure_time = 0.8
-max_initial_exposure_time = 300
-printer_correction = 1,1,1
-gamma_correction = 1
-area_fill = 45
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOSE\nPRINTER_TECHNOLOGY_SLA\n
-
-[printer:Anycubic Photon Mono X]
-printer_technology = SLA
-printer_model = PHOTON MONO X
-printer_variant = default
-default_sla_material_profile = Generic Blue Resin @MONO 0.05
-default_sla_print_profile = 0.05 Normal @ANYCUBIC
-thumbnails = 224x168
-sla_archive_format = pwmx
-bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02
-display_height = 120
-display_orientation = landscape
-display_mirror_x = 1
-display_mirror_y = 0
-display_pixels_x = 3840
-display_pixels_y = 2400
-display_width = 192
-max_print_height = 245
-elefant_foot_compensation = 0.2
-elefant_foot_min_width = 0.2
-min_exposure_time = 1
-max_exposure_time = 120
-min_initial_exposure_time = 1
-max_initial_exposure_time = 300
-printer_correction = 1,1,1
-gamma_correction = 1
-area_fill = 45
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\nPRINTER_TECHNOLOGY_SLA\n
-
-[printer:Anycubic Photon Mono X 6K]
-printer_technology = SLA
-printer_model = PHOTON MONO X 6K
-printer_variant = default
-default_sla_material_profile = Anycubic Plant-based UV Resin Grey @MONO 0.05
-default_sla_print_profile = 0.05 Normal @ANYCUBIC
-thumbnails = 224x168
-sla_archive_format = pwmx
-bed_shape = 1.48x1.02,198.48x1.02,198.48x123.02,1.48x123.02
-display_height = 122
-display_orientation = landscape
-display_mirror_x = 1
-display_mirror_y = 0
-display_pixels_x = 5760
-display_pixels_y = 3600
-display_width = 197
-max_print_height = 245
-elefant_foot_compensation = 0.2
-elefant_foot_min_width = 0.2
-min_exposure_time = 1
-max_exposure_time = 120
-min_initial_exposure_time = 1
-max_initial_exposure_time = 300
-printer_correction = 1,1,1
-gamma_correction = 1
-area_fill = 45
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX6K\n
-

resources/profiles/Artillery.idx

@@ -1,4 +1,8 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0
+0.0.9 Updated first layer height value.
 0.0.8 Support for the X3 and X4 series by porting settings from ArtillerySlicer V3.0.
 min_slic3r_version = 2.4.1-alpha0
 0.0.7 Added Eolas Prints filaments.

resources/profiles/Artillery.ini

@@ -13,9 +13,9 @@ repo_id = non-prusa-fff
 name = Artillery
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.8
+config_version = 1.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Artillery/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
@@ -26,6 +26,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 ## PRINTER ##
 #############
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Artillery/
 [printer_model:X1]
 name = Artillery Sidewinder X1
 variants = 0.4
@@ -34,6 +35,7 @@ bed_model = bed-x1.stl
 bed_texture = bed-x1.png
 default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
 
+thumbnail = X1_thumbnail.png
 [printer_model:Genius]
 name = Artillery Genius
 variants = 0.4
@@ -42,6 +44,7 @@ bed_model = bed-genius.stl
 bed_texture = bed-genius.png
 default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
 
+thumbnail = Genius_thumbnail.png
 [printer_model:Hornet]
 name = Artillery Hornet
 variants = 0.4
@@ -50,6 +53,7 @@ bed_model = bed-hornet.stl
 bed_texture = bed-hornet.png
 default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
 
+thumbnail = Hornet_thumbnail.png
 [printer_model:X3 Plus]
 name = Artillery Sidewinder X3 Plus
 variants = 0.4
@@ -58,6 +62,7 @@ bed_model = bed-x3-plus.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
 
+thumbnail = X3 Plus_thumbnail.png
 [printer_model:X3 Pro]
 name = Artillery Sidewinder X3 Pro
 variants = 0.4
@@ -66,6 +71,7 @@ bed_model = bed-x3-pro.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
 
+thumbnail = X3 Pro_thumbnail.png
 [printer_model:X4 Plus]
 name = Artillery Sidewinder X4 Plus
 variants = 0.4
@@ -74,6 +80,7 @@ bed_model = bed-x4-plus.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
 
+thumbnail = X4 Plus_thumbnail.png
 [printer_model:X4 Pro]
 name = Artillery Sidewinder X4 Pro
 variants = 0.4
@@ -82,6 +89,7 @@ bed_model = bed-x4-pro.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
 
+thumbnail = X4 Pro_thumbnail.png
 [printer_model:X4 Max]
 name = Artillery Sidewinder X4 Max
 variants = 0.4
@@ -91,6 +99,7 @@ bed_texture = bed-x1.png
 default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
 
 # Common printer preset
+thumbnail = X4 Max_thumbnail.png
 [printer:*common*]
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
 between_objects_gcode = 
@@ -402,7 +411,7 @@ fill_angle = 45
 fill_density = 15%
 first_layer_acceleration = 500
 first_layer_extrusion_width = 0.42
-first_layer_height = 150%
+first_layer_height = 0.25
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 1

resources/profiles/BIBO.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.4.1-beta3
 0.0.7 Correct missing profile improvement from 0.0.6 to set ensure_vertical_shell_thickness = 0 (off).
 0.0.6 Correct start gcode, match profile and firmware settings, and other profile improvements.

resources/profiles/BIBO.ini

@@ -6,14 +6,15 @@ repo_id = non-prusa-fff
 name = BIBO
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.7
+config_version = 1.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIBO/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIBO/
 [printer_model:BIBO2]
 name = BIBO2 Touch
 variants = 0.4
@@ -27,6 +28,7 @@ default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2;
 # not make it into the user interface.
 
 # Common print preset
+thumbnail = BIBO2_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear

resources/profiles/BIQU.idx

@@ -1,2 +1,5 @@
 min_slic3r_version = 2.6.0-alpha1
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
+min_slic3r_version = 2.6.0-alpha1
 0.1.0 Initial version

resources/profiles/BIQU.ini

@@ -5,13 +5,14 @@
 [vendor]
 repo_id = non-prusa-fff
 name = BIQU
-config_version = 0.1.0
+config_version = 1.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIQU/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIQU/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIQU/
 [printer_model:BIQUBX]
 name = BIQU BX
 variants = 0.4
@@ -24,6 +25,7 @@ default_materials = Generic PLA @BIQU; Generic PETG @BIQU; Generic ABS @BIQU
 # not make it into the user interface.
 
 # Common print preset
+thumbnail = BIQUBX_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = monotonic

resources/profiles/CocoaPress.idx

@@ -1,4 +1,10 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+min_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha2
+1.0.5 Hotfix for 2.7.2 color change, as well as ramping prime line to reduce initial blob
+1.0.4 Added proper pause and core change GCode that seems somewhat reliable.
+1.0.3 Swap purge direction for 1.6 nozzle to reduce dwelling time.
 1.0.2 Removed invalid compatible_print condition.
 1.0.1 Swapped Pause GCode, Fixed Chocolate Colors, Resolved Output Format issue from Inheriting Keyword Typo
 1.0.0 Initial

resources/profiles/CocoaPress.ini

@@ -6,9 +6,9 @@ repo_id = non-prusa-fff
 name = Cocoa Press
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.2
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/CocoaPress/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/CocoaPress/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
@@ -18,6 +18,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/CocoaPress/
 [printer_model:Cocoa_Press]
 name = Cocoa Press
 variants = 0.8; 1.6
@@ -30,7 +31,7 @@ thumbnail = CocoaPress_MiniChef.png
 [print:*common*]
 gcode_label_objects = 1
 gcode_resolution = 0.0125
-gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";$1$2M0;r;"Pause command allows you to get a full screen message."
+gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
 notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
 output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
 
@@ -56,7 +57,7 @@ default_acceleration = 1500
 dont_support_bridges = 1
 draft_shield = disabled
 elefant_foot_compensation = 0
-enable_dynamic_overhang_speeds = 0
+enable_dynamic_overhang_speeds = 1
 external_perimeter_acceleration = 0
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 25
@@ -107,7 +108,7 @@ min_skirt_length = 0
 mmu_segmented_region_max_width = 0
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-overhang_speed_0 = 15
+overhang_speed_0 = 12
 overhang_speed_1 = 15
 overhang_speed_2 = 20
 overhang_speed_3 = 25
@@ -227,7 +228,7 @@ default_acceleration = 1500
 dont_support_bridges = 1
 draft_shield = disabled
 elefant_foot_compensation = 0
-enable_dynamic_overhang_speeds = 0
+enable_dynamic_overhang_speeds = 1
 external_perimeter_acceleration = 0
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 25
@@ -278,7 +279,7 @@ min_skirt_length = 0
 mmu_segmented_region_max_width = 0
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-overhang_speed_0 = 15
+overhang_speed_0 = 12
 overhang_speed_1 = 15
 overhang_speed_2 = 20
 overhang_speed_3 = 25
@@ -448,11 +449,11 @@ autoemit_temperature_commands = 0
 bed_shape = 0x0,140x0,140x150,0x150
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
 between_objects_gcode = 
-color_change_gcode = ;G1 E-.05 F900\n;G1 X2.5 Y2.5 F4500 ;Move to the side\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\nM25 load new chocolate ;pause for user\n;G1 E.06 F900\n;G1 X2.6 Y2.6 F4500
+color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\n; restore position\nG61; \n\n;AFTER_COLOR_CHANGE
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 deretract_speed = 15
-end_gcode = print_end    ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y145\nM84
+end_gcode = print_end    ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
 extra_loading_move = -2
 extruder_colour = #FFE3CA
 extruder_offset = 0x0
@@ -482,7 +483,7 @@ max_print_height = 150
 min_layer_height = 0.2
 nozzle_diameter = 0.8
 parking_pos_retraction = 92
-pause_print_gcode = ; end pause print
+pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box.  As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message.  Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
 print_host = 
 printer_settings_id = cocoa_press_minichef_settings_0_8
 printer_technology = FFF
@@ -503,7 +504,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 15
 silent_mode = 0
 single_extruder_multi_material = 0
-start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28 ; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing + loading mesh\nG29 O V4 ; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y148\nG1 Z.5\nG1 E1.25 F450\nG1 X8.25 Y148 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y145 F900\nG1 X131.25 Y145 E.10538\nG1 X141.75 Y145
+start_gcode = M220 S100; set speed to 100%\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing + loading mesh\nG29 O V4 ; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y148 Z3.2\nG1 X128.625 Y148 Z.5 E.15\nG1 X8.25 Y148 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y145 F900\nG1 X131.25 Y145 E.10538\nG1 X141.75 Y145
 template_custom_gcode = 
 thumbnails = 64x64,400x300
 thumbnails_format = PNG
@@ -521,12 +522,12 @@ autoemit_temperature_commands = 0
 bed_shape = 0x0,140x0,140x150,0x150
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
 between_objects_gcode = 
-color_change_gcode = ;G1 E-.05 F900\n;G1 X2.5 Y2.5 F4500 ;Move to the side\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\nM25 load new chocolate ;pause for user\n;G1 E.06 F900\n;G1 X2.6 Y2.6 F4500
+color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\nG61; restore start position\n;AFTER_COLOR_CHANGE
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 default_print_profile = 1.0
 deretract_speed = 15
-end_gcode = print_end    ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y145\nM84
+end_gcode = print_end    ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
 extra_loading_move = -2
 extruder_colour = #FFE3CA
 extruder_offset = 0x0
@@ -556,7 +557,7 @@ max_print_height = 150
 min_layer_height = 0.2
 nozzle_diameter = 1.6
 parking_pos_retraction = 92
-pause_print_gcode = ; end pause gcode
+pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box.  As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message.  Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
 print_host = 
 printer_settings_id = cocoa_press_minichef_settings_1_6
 printer_technology = FFF
@@ -577,7 +578,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 15
 silent_mode = 0
 single_extruder_multi_material = 0
-start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28 ; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing loading mesh\nG29 O V4; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line\n\nG1 X5.8 Y 145\nG1 Z1 ; small z-hop to avoid potentially big purge getting caught.\nG1 E1.25 F450\nG1 X134.2 Y145 E.44109 F900
+start_gcode = M220 S100; set speed to 100%\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing loading mesh\nG29 O V4; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line\n\nG1 X145 Y 145\nG1 Z1 ; small z-hop to avoid potentially big purge getting caught.\nG1 E1.25 F450\nG1 X5 Y145 E.33109 F900
 template_custom_gcode = 
 thumbnails = 64x64,400x300
 thumbnails_format = PNG

resources/profiles/Creality.idx

@@ -1,3 +1,8 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
+min_slic3r_version = 2.7.0
+0.3.0 Finetune Ironing, Add Idle Temperatures in start_code's, Add PolyMaker PolyTerra PLA, Fix Ender-5 (Pro) Bed Size.
 min_slic3r_version = 2.6.0-alpha0
 0.2.7 Added Eolas Prints filaments.
 0.2.6 Add Ender-5 Pro, Ender-5 S1, Sermoon-V1, Sermoon-V1 Pro. Unlock HIGHSPEED/SUPERSPEED presets for Ender-5 S1/Ender-6/Ender-7.

resources/profiles/Creality.ini

@@ -6,15 +6,16 @@ repo_id = non-prusa-fff
 name = Creality
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.2.7
+config_version = 1.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Creality/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Creality/
 [printer_model:ENDER3]
 name = Creality Ender-3
 variants = 0.4; 0.3; 0.5; 0.6
@@ -24,6 +25,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3_thumbnail.png
 [printer_model:ENDER3BLTOUCH]
 name = Creality Ender-3 BLTouch
 variants = 0.4; 0.3; 0.5; 0.6
@@ -33,6 +35,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3BLTOUCH_thumbnail.png
 [printer_model:ENDER3PRO]
 name = Creality Ender-3 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -42,6 +45,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3PRO_thumbnail.png
 [printer_model:ENDER3NEO]
 name = Creality Ender-3 Neo
 variants = 0.4; 0.3; 0.5; 0.6
@@ -51,6 +55,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3NEO_thumbnail.png
 [printer_model:ENDER3V2]
 name = Creality Ender-3 V2
 variants = 0.4; 0.3; 0.5; 0.6
@@ -60,6 +65,7 @@ bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3V2_thumbnail.png
 [printer_model:ENDER3V2NEO]
 name = Creality Ender-3 V2 Neo
 variants = 0.4; 0.3; 0.5; 0.6
@@ -69,6 +75,7 @@ bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3V2NEO_thumbnail.png
 [printer_model:ENDER3S1]
 name = Creality Ender-3 S1
 variants = 0.4; 0.3; 0.5; 0.6
@@ -78,6 +85,7 @@ bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3S1_thumbnail.png
 [printer_model:ENDER3S1PRO]
 name = Creality Ender-3 S1 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -87,6 +95,7 @@ bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3S1PRO_thumbnail.png
 [printer_model:ENDER3S1PLUS]
 name = Creality Ender-3 S1 Plus
 variants = 0.4; 0.3; 0.5; 0.6
@@ -96,6 +105,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3S1PLUS_thumbnail.png
 [printer_model:ENDER3MAX]
 name = Creality Ender-3 Max
 variants = 0.4; 0.3; 0.5; 0.6
@@ -105,6 +115,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3MAX_thumbnail.png
 [printer_model:ENDER3MAXNEO]
 name = Creality Ender-3 Max Neo
 variants = 0.4; 0.3; 0.5; 0.6
@@ -114,6 +125,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER3MAXNEO_thumbnail.png
 [printer_model:ENDER4]
 name = Creality Ender-4
 variants = 0.4; 0.3; 0.5; 0.6
@@ -123,6 +135,7 @@ bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER4_thumbnail.png
 [printer_model:ENDER5]
 name = Creality Ender-5
 variants = 0.4; 0.3; 0.5; 0.6
@@ -132,6 +145,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER5_thumbnail.png
 [printer_model:ENDER5PRO]
 name = Creality Ender-5 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -141,6 +155,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER5PRO_thumbnail.png
 [printer_model:ENDER5PLUS]
 name = Creality Ender-5 Plus
 variants = 0.4; 0.3; 0.5; 0.6
@@ -150,6 +165,7 @@ bed_model = ender5plus_bed.stl
 bed_texture = ender5plus.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER5PLUS_thumbnail.png
 [printer_model:ENDER5S1]
 name = Creality Ender-5 S1
 variants = 0.4; 0.3; 0.5; 0.6
@@ -159,6 +175,7 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER5S1_thumbnail.png
 [printer_model:ENDER6]
 name = Creality Ender-6
 variants = 0.4; 0.3; 0.5; 0.6
@@ -168,6 +185,7 @@ bed_model = ender6_bed.stl
 bed_texture = ender6.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER6_thumbnail.png
 [printer_model:ENDER7]
 name = Creality Ender-7
 variants = 0.4; 0.3; 0.5; 0.6
@@ -177,6 +195,7 @@ bed_model = ender7_bed.stl
 bed_texture = ender7.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER7_thumbnail.png
 [printer_model:ENDER2]
 name = Creality Ender-2
 variants = 0.4; 0.3; 0.5; 0.6
@@ -186,6 +205,7 @@ bed_model = ender2_bed.stl
 bed_texture = ender2.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER2_thumbnail.png
 [printer_model:ENDER2PRO]
 name = Creality Ender-2 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -195,6 +215,7 @@ bed_model = ender2pro_bed.stl
 bed_texture = ender2pro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = ENDER2PRO_thumbnail.png
 [printer_model:CR5PRO]
 name = Creality CR-5 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -204,6 +225,7 @@ bed_model = cr5pro_bed.stl
 bed_texture = cr5pro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR5PRO_thumbnail.png
 [printer_model:CR5PROH]
 name = Creality CR-5 Pro H
 variants = 0.4; 0.3; 0.5; 0.6
@@ -213,6 +235,7 @@ bed_model = cr5pro_bed.stl
 bed_texture = cr5pro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR5PROH_thumbnail.png
 [printer_model:CR6SE]
 name = Creality CR-6 SE
 variants = 0.4; 0.3; 0.5; 0.6
@@ -222,6 +245,7 @@ bed_model = cr6se_bed.stl
 bed_texture = cr6se.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR6SE_thumbnail.png
 [printer_model:CR6MAX]
 name = Creality CR-6 Max
 variants = 0.4; 0.3; 0.5; 0.6
@@ -231,6 +255,7 @@ bed_model = cr10s4_bed.stl
 bed_texture = cr10s4.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR6MAX_thumbnail.png
 [printer_model:CR10SMART]
 name = Creality CR-10 SMART
 variants = 0.4; 0.3; 0.5; 0.6
@@ -240,6 +265,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10SMART_thumbnail.png
 [printer_model:CR10SMARTPRO]
 name = Creality CR-10 SMART Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -249,6 +275,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10SMARTPRO_thumbnail.png
 [printer_model:CR10MINI]
 name = Creality CR-10 Mini
 variants = 0.4; 0.3; 0.5; 0.6
@@ -258,6 +285,7 @@ bed_model = cr10mini_bed.stl
 bed_texture = cr10mini.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10MINI_thumbnail.png
 [printer_model:CR10MAX]
 name = Creality CR-10 Max
 variants = 0.4; 0.3; 0.5; 0.6
@@ -267,6 +295,7 @@ bed_model = cr10max_bed.stl
 bed_texture = cr10max.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10MAX_thumbnail.png
 [printer_model:CR10]
 name = Creality CR-10
 variants = 0.4; 0.3; 0.5; 0.6
@@ -276,6 +305,7 @@ bed_model = cr10_bed.stl
 bed_texture = cr10.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10_thumbnail.png
 [printer_model:CR10V2]
 name = Creality CR-10 V2
 variants = 0.4; 0.3; 0.5; 0.6
@@ -285,6 +315,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10V2_thumbnail.png
 [printer_model:CR10V3]
 name = Creality CR-10 V3
 variants = 0.4; 0.3; 0.5; 0.6
@@ -294,6 +325,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10V3_thumbnail.png
 [printer_model:CR10S]
 name = Creality CR-10 S
 variants = 0.4; 0.3; 0.5; 0.6
@@ -303,6 +335,7 @@ bed_model = cr10_bed.stl
 bed_texture = cr10.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10S_thumbnail.png
 [printer_model:CR10SPRO]
 name = Creality CR-10 S Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -312,6 +345,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10SPRO_thumbnail.png
 [printer_model:CR10SPROV2]
 name = Creality CR-10 S Pro V2
 variants = 0.4; 0.3; 0.5; 0.6
@@ -321,6 +355,7 @@ bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10SPROV2_thumbnail.png
 [printer_model:CR10S4]
 name = Creality CR-10 S4
 variants = 0.4; 0.3; 0.5; 0.6
@@ -330,6 +365,7 @@ bed_model = cr10s4_bed.stl
 bed_texture = cr10s4.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10S4_thumbnail.png
 [printer_model:CR10S5]
 name = Creality CR-10 S5
 variants = 0.4; 0.3; 0.5; 0.6
@@ -339,6 +375,7 @@ bed_model = cr10s5_bed.stl
 bed_texture = cr10s5.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR10S5_thumbnail.png
 [printer_model:CR20]
 name = Creality CR-20
 variants = 0.4; 0.3; 0.5; 0.6
@@ -348,6 +385,7 @@ bed_model = ender3_bed.stl
 bed_texture = cr20.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR20_thumbnail.png
 [printer_model:CR20PRO]
 name = Creality CR-20 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -357,6 +395,7 @@ bed_model = ender3_bed.stl
 bed_texture = cr20.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR20PRO_thumbnail.png
 [printer_model:CR200B]
 name = Creality CR-200B
 variants = 0.4; 0.3; 0.5; 0.6
@@ -366,6 +405,7 @@ bed_model = cr200b_bed.stl
 bed_texture = cr200b.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
+thumbnail = CR200B_thumbnail.png
 [printer_model:CR8]
 name = Creality CR-8
 variants = 0.4; 0.3; 0.5; 0.6
@@ -375,24 +415,7 @@ bed_model = cr8_bed.stl
 bed_texture = cr8.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
-#[printer_model:CRX]
+thumbnail = CR8_thumbnail.png
-#name = Creality CR-X
-#variants = 0.4; 0.3; 0.5; 0.6
-#technology = FFF
-#family = CR-X
-#bed_model = cr10v2_bed.stl
-#bed_texture = cr10spro.svg
-#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-
-#[printer_model:CRXPRO]
-#name = Creality CR-X Pro
-#variants = 0.4; 0.3; 0.5; 0.6
-#technology = FFF
-#family = CR-X
-#bed_model = cr10v2_bed.stl
-#bed_texture = cr10spro.svg
-#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-
 [printer_model:SERMOOND1]
 name = Creality Sermoon-D1
 variants = 0.4; 0.3; 0.5; 0.6
@@ -402,8 +425,7 @@ bed_model = sermoond1_bed.stl
 bed_texture = sermoond1.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
-
+thumbnail = SERMOOND1_thumbnail.png
-
 [printer_model:SERMOONV1]
 name = Creality Sermoon-V1
 variants = 0.4; 0.3; 0.5; 0.6
@@ -413,8 +435,7 @@ bed_model = sermoonv1_bed.stl
 bed_texture = sermoonv1.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
 
-
+thumbnail = SERMOONV1_thumbnail.png
-
 [printer_model:SERMOONV1PRO]
 name = Creality Sermoon-V1 Pro
 variants = 0.4; 0.3; 0.5; 0.6
@@ -430,6 +451,7 @@ default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @
 # not make it into the user interface.
 
 # Common print preset
+thumbnail = SERMOONV1PRO_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bridge_acceleration = 250
@@ -465,6 +487,10 @@ infill_only_where_needed = 0
 infill_overlap = 23%
 infill_speed = 50
 interface_shells = 0
+ironing_flowrate = 10%
+ironing_spacing = 0.1
+ironing_speed = 20
+ironing_type = top
 max_print_speed = 100
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
@@ -532,7 +558,7 @@ top_solid_infill_speed = 30
 support_material_speed = 40
 support_material_interface_speed = 100%
 bridge_speed = 25
-ironing_speed = 15
+ironing_speed = 20
 travel_speed = 150
 travel_speed_z = 0
 first_layer_speed = 20
@@ -1128,6 +1154,7 @@ min_fan_speed = 100
 bridge_fan_speed = 100
 disable_fan_first_layers = 1
 temperature = 205
+idle_temperature = 150
 
 [filament:*PET*]
 inherits = *common*
@@ -1147,6 +1174,7 @@ max_fan_speed = 50
 min_fan_speed = 20
 bridge_fan_speed = 100
 temperature = 240
+idle_temperature = 160
 
 [filament:*ABS*]
 inherits = *common*
@@ -1167,6 +1195,7 @@ min_fan_speed = 0
 bridge_fan_speed = 30
 top_fan_speed = 0
 temperature = 245
+idle_temperature = 180
 
 [filament:*TPU*]
 inherits = *common*
@@ -1187,6 +1216,7 @@ min_fan_speed = 0
 bridge_fan_speed = 30
 top_fan_speed = 0
 temperature = 245
+idle_temperature = 130
 
 [filament:Generic PLA @CREALITY]
 inherits = *PLA*
@@ -1456,6 +1486,18 @@ filament_density = 1.37
 filament_colour = #FF4640
 filament_spool_weight = 180
 
+[filament:Polymaker PolyTerra PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = Polymaker
+temperature = 205
+bed_temperature = 45
+first_layer_temperature = 205
+first_layer_bed_temperature = 45
+filament_cost = 20.99
+filament_density = 1.31
+filament_colour = #42B3C0
+filament_spool_weight = 140
+
 [filament:VOXELPLA PLA Plus @CREALITY]
 inherits = *PLA*
 filament_vendor = VOXELPLA
@@ -1626,7 +1668,7 @@ wipe = 1
 z_offset = 0
 printer_model = 
 default_filament_profile = "Generic PLA @CREALITY"
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
 # Intended for printers that have exclusively shipped with a 32bit mainboard
@@ -1635,19 +1677,19 @@ gcode_flavor = marlin2
 
 # Intended for printers equipped with a strain gauge mechanism, like the CR-6 series
 [printer:*straingauge*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM109 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 
 # Intended for printers with a smaller bed, like the Ender-3 series
 [printer:*fastabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 
 # Intended for printers with a larger bed, like the CR-10 series
 [printer:*slowabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 
 # intended for printers that have RESTORE_LEVELING_AFTER_G28 enabled in firmware
 [printer:*storedabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 
 # Intended for printers with vendor official firmware verified to support M25
 [printer:*pauseprint*]
@@ -1993,7 +2035,7 @@ inherits = *ENDER4*; *0.6nozzle*
 
 [printer:*ENDER5*]
 inherits = *common*; *bowdenlong*; *descendingz*
-bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
+bed_shape = 5x0,215x0,215x220,5x220
 max_print_height = 300
 printer_model = ENDER5
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
@@ -2017,7 +2059,7 @@ inherits = *ENDER5*; *0.6nozzle*
 
 [printer:*ENDER5PRO*]
 inherits = *common*; *bowdencapricorn*; *descendingz*
-bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
+bed_shape = 5x0,215x0,215x220,5x220
 max_print_height = 300
 printer_model = ENDER5PRO
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PRO\nPRINTER_HAS_BOWDEN

resources/profiles/Elegoo.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha1
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha1
 1.0.3 Added Eolas Prints filaments.
 1.0.2 Added new printer models.

resources/profiles/Elegoo.ini

@@ -7,13 +7,14 @@ repo_id = non-prusa-fff
 name = Elegoo
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.3
+config_version = 2.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Elegoo/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Elegoo/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Elegoo/
 [printer_model:NEPTUNE1]
 name = Elegoo Neptune-1
 variants = 0.4
@@ -23,6 +24,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE1_thumbnail.png
 [printer_model:NEPTUNE2]
 name = Elegoo Neptune-2
 variants = 0.4
@@ -32,6 +34,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE2_thumbnail.png
 [printer_model:NEPTUNE2D]
 name = Elegoo Neptune-2D
 variants = 0.4
@@ -41,6 +44,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE2D_thumbnail.png
 [printer_model:NEPTUNE2S]
 name = Elegoo Neptune-2S
 variants = 0.4
@@ -50,6 +54,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE2S_thumbnail.png
 [printer_model:NEPTUNE3]
 name = Elegoo Neptune-3
 variants = 0.4
@@ -59,6 +64,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE3_thumbnail.png
 [printer_model:NEPTUNE3MAX]
 name = Elegoo Neptune-3 Max
 variants = 0.4
@@ -68,6 +74,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE3MAX_thumbnail.png
 [printer_model:NEPTUNE3PLUS]
 name = Elegoo Neptune-3 Plus
 variants = 0.4
@@ -77,6 +84,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE3PLUS_thumbnail.png
 [printer_model:NEPTUNE3PRO]
 name = Elegoo Neptune-3 Pro
 variants = 0.4
@@ -86,6 +94,7 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
 
+thumbnail = NEPTUNE3PRO_thumbnail.png
 [printer_model:NEPTUNEX]
 name = Elegoo Neptune-X
 variants = 0.4
@@ -99,6 +108,7 @@ default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEG
 # not make it into the user interface.
 
 # Common print preset
+thumbnail = NEPTUNEX_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bridge_angle = 0
@@ -594,4 +604,3 @@ retract_length = 2.5
 retract_speed = 25
 printer_model = NEPTUNE3PRO
 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3PRO
-

resources/profiles/FLSun.idx

@@ -1,2 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.3.0-rc2
+0.0.2 Updated start g-code for QQ Pro.
 0.0.1 Initial Version

resources/profiles/FLSun.ini

@@ -8,15 +8,16 @@ repo_id = non-prusa-fff
 name = FLSun
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.1
+config_version = 1.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/FLSun/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/FLSun/
 [printer_model:QQSP]
 name = FLSun QQS Pro
 variants = 0.4; 0.6
@@ -25,6 +26,7 @@ bed_model = QQSP_bed.stl
 bed_texture = QQSP.svg
 default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
 
+thumbnail = QQSP_thumbnail.png
 [printer_model:Q5]
 name = FLSun Q5
 variants = 0.4; 0.6
@@ -38,6 +40,7 @@ default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN;
 #########################################
 
 # Common print preset
+thumbnail = Q5_thumbnail.png
 [print:*common_flsunq*]
 avoid_crossing_perimeters = 1
 avoid_crossing_perimeters_max_detour = 0
@@ -775,7 +778,7 @@ retract_length = 5
 retract_speed = 30
 retract_lift = 0.4
 silent_mode = 1
-start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...
+start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print
 thumbnails = 16x16,260x260
 use_relative_e_distances = 1
 use_volumetric_e = 0

resources/profiles/Geeetech.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha1
 0.1.0 Initial Geeetech bundle
 

resources/profiles/Geeetech.ini

@@ -8,14 +8,15 @@ repo_id = non-prusa-fff
 name = Geeetech
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.1.0
+config_version = 1.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Geeetech/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Geeetech/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Geeetech/
 [printer_model:Thunder]
 name = Geeetech Thunder
 variants = 0.4; 0.2; 0.6; 0.8
@@ -25,6 +26,7 @@ bed_model = 250x250.stl
 bed_texture = 250x250.svg
 default_materials = Thunder HS-PLA @Geeetech; Thunder PLA @Geeetech; Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = Thunder_thumbnail.png
 [printer_model:ThunderPro]
 name = Geeetech Thunder Pro
 variants = 0.4; 0.2; 0.6; 0.8
@@ -34,6 +36,7 @@ bed_model = 250x250.stl
 bed_texture = 250x250.svg
 default_materials = Thunder HS-PLA @Geeetech; Thunder PLA @Geeetech; Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = ThunderPro_thumbnail.png
 [printer_model:MizarS]
 name = Geeetech Mizar S
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -43,6 +46,7 @@ bed_model = 255x255.stl
 bed_texture = 255x255.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MizarS_thumbnail.png
 [printer_model:MizarPro]
 name = Geeetech Mizar Pro
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -52,6 +56,7 @@ bed_model = 220x220.stl
 bed_texture = 220x220.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MizarPro_thumbnail.png
 [printer_model:Mizar]
 name = Geeetech Mizar
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -61,6 +66,7 @@ bed_model = 220x220.stl
 bed_texture = 220x220.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = Mizar_thumbnail.png
 [printer_model:MizarMax]
 name = Geeetech Mizar Max
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -70,6 +76,7 @@ bed_model = 320x320.stl
 bed_texture = 320x320.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MizarMax_thumbnail.png
 [printer_model:MizarM]
 name = Geeetech Mizar M
 variants = 0.4
@@ -88,6 +95,7 @@ default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @
 #bed_texture = 255x255.svg
 #default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MizarM_thumbnail.png
 [printer_model:A10Pro]
 name = Geeetech A10 Pro
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -97,6 +105,7 @@ bed_model = 220x220.stl
 bed_texture = 220x220.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A10Pro_thumbnail.png
 [printer_model:A10M]
 name = Geeetech A10 M
 variants = 0.4
@@ -106,6 +115,7 @@ bed_model = 220x220.stl
 bed_texture = 220x220.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A10M_thumbnail.png
 [printer_model:A10T]
 name = Geeetech A10 T
 variants = 0.4
@@ -115,6 +125,7 @@ bed_model = 220x220.stl
 bed_texture = 220x220.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A10T_thumbnail.png
 [printer_model:A20]
 name = Geeetech A20
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -124,6 +135,7 @@ bed_model = 250x250.stl
 bed_texture = 250x250.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A20_thumbnail.png
 [printer_model:A20M]
 name = Geeetech A20 M
 variants = 0.4
@@ -133,6 +145,7 @@ bed_model = 250x250.stl
 bed_texture = 250x250.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A20M_thumbnail.png
 [printer_model:A20T]
 name = Geeetech A20 T
 variants = 0.4
@@ -142,6 +155,7 @@ bed_model = 250x250.stl
 bed_texture = 250x250.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A20T_thumbnail.png
 [printer_model:A30Pro]
 name = Geeetech A30 Pro
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -151,6 +165,7 @@ bed_model = 320x320.stl
 bed_texture = 320x320.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A30Pro_thumbnail.png
 [printer_model:A30M]
 name = Geeetech A30 M
 variants = 0.4
@@ -160,6 +175,7 @@ bed_model = 320x320.stl
 bed_texture = 320x320.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A30M_thumbnail.png
 [printer_model:A30T]
 name = Geeetech A30 T
 variants = 0.4
@@ -169,6 +185,7 @@ bed_model = 320x320.stl
 bed_texture = 320x320.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = A30T_thumbnail.png
 [printer_model:E180]
 name = Geeetech E180
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -178,6 +195,7 @@ bed_model = 125X130.stl
 bed_texture = 125X130.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = E180_thumbnail.png
 [printer_model:MeDucer]
 name = Geeetech Me Ducer
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -187,6 +205,7 @@ bed_model = 180X150.stl
 bed_texture = 180X150.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MeDucer_thumbnail.png
 [printer_model:MeCreator]
 name = Geeetech Me Creator
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -196,6 +215,7 @@ bed_model = 150x150.stl
 bed_texture = 150x150.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MeCreator_thumbnail.png
 [printer_model:MeCreator2]
 name = Geeetech Me Creator2
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -205,6 +225,7 @@ bed_model = 160x160.stl
 bed_texture = 160x160.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = MeCreator2_thumbnail.png
 [printer_model:GiantArmD200]
 name = Geeetech GiantArmD200
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -214,6 +235,7 @@ bed_model = 300x180.stl
 bed_texture = 300x180.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = GiantArmD200_thumbnail.png
 [printer_model:I3ProB]
 name = Geeetech I3 ProB
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -223,6 +245,7 @@ bed_model = 200x200.stl
 bed_texture = 200x200.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = I3ProB_thumbnail.png
 [printer_model:I3ProW]
 name = Geeetech I3 ProW
 variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -232,6 +255,7 @@ bed_model = 200x200.stl
 bed_texture = 200x200.svg
 default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
 
+thumbnail = I3ProW_thumbnail.png
 [printer_model:I3ProC]
 name = Geeetech I3 ProC
 variants = 0.4
@@ -247,6 +271,7 @@ default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @
 ####### Start ###print presets ########
 #########################################
 
+thumbnail = I3ProC_thumbnail.png
 [print:*common*]
 # Print presets for common printers
 avoid_crossing_perimeters = 0

resources/profiles/INAT.idx

@@ -1,6 +1,9 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.5.0-alpha0
 0.0.4 Improve Proton X profiles, Add Proton XE-750 printer
-min_slic3r_version = 2.4.1
+min_slic3r_version = 2.3.1-beta
 0.0.3 Set default filament profile.
 0.0.2 Improved start gcode, changed filename format
 0.0.1 Initial version

resources/profiles/INAT.ini

@@ -4,13 +4,14 @@
 repo_id = non-prusa-fff
 # Vendor name will be shown by the Config Wizard.
 name = INAT
-config_version = 0.0.4
+config_version = 1.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/INAT/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/INAT/
 
 ###
 ###     PRINTER LIST
 ###
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/INAT/
 [printer_model:PROTON_X_RAIL]
 name = INAT Proton X Rail
 variants = 0.4
@@ -18,6 +19,7 @@ technology = FFF
 family = Proton
 default_materials = PLA @PROTON_X
 
+thumbnail = PROTON_X_RAIL_thumbnail.png
 [printer_model:PROTON_X_ROD]
 name = INAT Proton X Rod
 variants = 0.4
@@ -25,6 +27,7 @@ technology = FFF
 family = Proton
 default_materials = PLA @PROTON_X
 
+thumbnail = PROTON_X_ROD_thumbnail.png
 [printer_model:PROTON_XE750]
 name = INAT Proton XE-750
 variants = 0.4
@@ -37,6 +40,7 @@ default_materials = PLA @PROTON_XE750
 ###    COMMON QUALITY DEFINITIONS
 ###
 
+thumbnail = PROTON_XE750_thumbnail.png
 [print:*common*]
 #layers
 layer_height = 0.2

resources/profiles/Infinity3D.idx

@@ -1,2 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.5.0-alpha0
 1.0.0 Initial Infinity3D bundle

resources/profiles/Infinity3D.ini

@@ -6,11 +6,12 @@ repo_id = non-prusa-fff
 name = Infinity3D
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the Slic3r configuration to be downgraded.
-config_version = 1.0.0
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Infinity3D/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Infinity3D/
 # The printer models will be shown by the Configuration Wizard in this order,
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Infinity3D/
 [printer_model:DEV-200]
 name = Infinity3D DEV-200
 variants = 0.4
@@ -19,6 +20,7 @@ bed_model = DEV_200_bed.stl
 bed_texture = DEV_200_texture.svg
 default_materials = Generic PLA @Infinity3D; Generic PETG @Infinity3D
 
+thumbnail = DEV-200_thumbnail.png
 [printer_model:DEV-350]
 name = Infinity3D DEV-350
 variants = 0.4
@@ -27,6 +29,7 @@ bed_model = DEV_350_bed.stl
 bed_texture = DEV_350_texture.svg
 default_materials = Generic PLA @Infinity3D; Generic PETG @Infinity3D
 
+thumbnail = DEV-350_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 1
 avoid_crossing_perimeters_max_detour = 0

resources/profiles/Jubilee.idx

@@ -1,2 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.4.1-alpha
 1.0.0 Initial Jubilee bundle

resources/profiles/Jubilee.ini

@@ -8,11 +8,12 @@ repo_id = non-prusa-fff
 name = Jubilee
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the Slic3r configuration to be downgraded.
-config_version = 1.0.0
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Jubilee/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Jubilee/
 # The printer models will be shown by the Configuration Wizard in this order,
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Jubilee/
 [printer_model:Jubilee]
 name = Jubilee
 variants = 0.4; Volcano 0.4
@@ -21,6 +22,7 @@ bed_model = Jubilee_bed.stl
 bed_texture = Jubilee_texture.svg
 default_materials = Generic PLA @Jubilee; Generic PETG @Jubilee
 
+thumbnail = Jubilee_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = monotonic

resources/profiles/LNL3D.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0
 0.0.4 Updated Start G-Codes.
 0.0.3 Added new printer profile.

resources/profiles/LNL3D.ini

@@ -11,10 +11,10 @@ name = LNL3D
 
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.4
+config_version = 1.0.0
 
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LNL3D/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LNL3D/
 
 ########################################
 ########## Printer models     ##########
@@ -24,6 +24,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LNL3D/
 [printer_model:LNL3D_D3]
 name = LNL3D D3
 variants = 0.4; 0.2; 0.6; 0.8
@@ -33,6 +34,7 @@ bed_model = LNL3D_D3_bed.stl
 bed_texture = LNL3D_D3_texture.svg
 default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
 
+thumbnail = LNL3D_D3_thumbnail.png
 [printer_model:LNL3D_D3_VULCAN]
 name = LNL3D D3 Vulcan
 variants = 0.4; 0.2; 0.6; 0.8
@@ -42,6 +44,7 @@ bed_model = LNL3D_D3_VULCAN_bed.stl
 bed_texture = LNL3D_D3_VULCAN_texture.svg
 default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
 
+thumbnail = LNL3D_D3_VULCAN_thumbnail.png
 [printer_model:LNL3D_D3_V2]
 name = LNL3D D3 V2
 variants = 0.4; 0.2; 0.6; 0.8
@@ -51,6 +54,7 @@ bed_model = LNL3D_D3_V2_bed.stl
 bed_texture = LNL3D_D3_V2_texture.svg
 default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
 
+thumbnail = LNL3D_D3_V2_thumbnail.png
 [printer_model:LNL3D_D5]
 name = LNL3D D5
 variants = 0.4; 0.2; 0.6; 0.8
@@ -60,6 +64,7 @@ bed_model = LNL3D_D5_bed.stl
 bed_texture = LNL3D_D5_texture.svg
 default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
 
+thumbnail = LNL3D_D5_thumbnail.png
 [printer_model:LNL3D_D6]
 name = LNL3D D6
 variants = 0.4; 0.2; 0.6; 0.8
@@ -77,6 +82,7 @@ default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
 # not make it into the user interface.
 
 # Common print presets
+thumbnail = LNL3D_D6_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bridge_acceleration = 250

resources/profiles/LulzBot.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.3.0-beta2
 0.1.0 General rework. Added new print and filament profiles. 
 0.0.2 Removed obsolete host keys

resources/profiles/LulzBot.ini

@@ -5,9 +5,10 @@
 repo_id = non-prusa-fff
 # Vendor name will be shown by the Config Wizard.
 name = LulzBot
-config_version = 0.1.0
+config_version = 1.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LulzBot/
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LulzBot/
 [printer_model:MINI_AERO]
 name = Mini Aero
 variants = 0.5
@@ -16,6 +17,7 @@ technology = FFF
 #bed_texture = mini.svg
 default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
 
+thumbnail = MINI_AERO_thumbnail.png
 [printer_model:TAZ6_AERO]
 name = Taz6 Aero
 variants = 0.5
@@ -28,6 +30,7 @@ default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lul
 # technology = FFF
 # default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
 
+thumbnail = TAZ6_AERO_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = monotonic

resources/profiles/MakerGear.idx

@@ -1,2 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha1
+0.1.1 Adjusted M2, M2Dual and M3 starting scripts
 0.1.0 Initial version

resources/profiles/MakerGear.ini

@@ -3,9 +3,10 @@
 [vendor]
 repo_id = non-prusa-fff
 name = MakerGear
-config_version = 0.1.0
+config_version = 1.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/MakerGear/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/MakerGear/
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/MakerGear/
 [printer_model:MAKERGEAR_MICRO]
 # bed_model = waiting on this one
 default_materials = MakerGear PLA @MakerGear_MICRO
@@ -14,6 +15,7 @@ name = Micro
 technology = FFF
 variants = 0.40
 
+thumbnail = MAKERGEAR_MICRO_thumbnail.png
 [printer_model:MAKERGEAR_M2]
 bed_model = M2_M3.stl
 bed_texture = M2_M3.svg
@@ -23,6 +25,7 @@ name = MakerGear M2(V4 Hotend)
 technology = FFF
 variants = 0.35; 0.50; 0.25; 0.75
 
+thumbnail = MAKERGEAR_M2_thumbnail.png
 [printer_model:MAKERGEAR_M2_DUAL]
 bed_model = M2_M3.stl
 bed_texture = M2_M3.svg
@@ -32,6 +35,7 @@ name = MakerGear M2 Dual
 technology = FFF
 variants = 0.35; 0.50; 0.25; 0.75
 
+thumbnail = MAKERGEAR_M2_DUAL_thumbnail.png
 [printer_model:MAKERGEAR_M3_SE]
 bed_model = M2_M3.stl
 bed_texture = M2_M3.svg
@@ -41,6 +45,7 @@ name = M3 - Single Extruder
 technology = FFF
 variants = 0.35; 0.50; 0.25; 0.75
 
+thumbnail = MAKERGEAR_M3_SE_thumbnail.png
 [printer_model:MAKERGEAR_M3_ID_0]
 bed_model = M2_M3.stl
 bed_texture = M2_M3.svg
@@ -86,6 +91,7 @@ name = Ultra One
 technology = FFF
 variants = 0.50; 0.25; 0.35; 0.75
 
+thumbnail = MAKERGEAR_U1_thumbnail.png
 [printer_model:MAKERGEAR_U1_DUPLICATION]
 # bed_model = 
 # bed_texture = 
@@ -1268,7 +1274,7 @@ nozzle_diameter = 0.35
 printer_model = MAKERGEAR_M2
 printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M2\n 
 printer_variant = 0.35
-start_gcode = M108 S255 ; turn on M2 fans\nG28 ; home all axes\nG1 Y50 Z0.3 F9600 ; move forward to avoid binder clips\nG1 X205 Z10 ; move off platform\nG1 Z0.4 ; position nozzle\nG92 E0 ; zero extruder\nM109 S[first_layer_temperature_[current_extruder]]\nG1 E25 F225 ; purge nozzle\nG92 E0 ; zero extruder\nG1 X190 Z0.1 E1.0 F1200 ; slow wipe\nG1 X180 Z0.25 ; lift\n
+start_gcode = M108 S255 ; turn on M2 fans\nG28 ; home all axes\nG1 Y50 F6000 ; move forward to avoid binder clips\nG1 X205 Z10 ; move off platform\nG1 Z0.4 ; position nozzle\nG92 E0 ; zero extruder\nM109 S[first_layer_temperature_[current_extruder]]\nG1 E25 F225 ; purge nozzle\nG92 E0 ; zero extruder\nG1 X190 Z0.1 E1.0 F1200 ; slow wipe\nG1 X180 Z0.25 ; lift\n
 # thumbnails = 16x16,220x124
 
 [printer:MakerGear M2 0.25 Nozzle]
@@ -1329,7 +1335,7 @@ nozzle_diameter = 0.35,0.35
 printer_model = MAKERGEAR_M2_DUAL
 printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M2_DUAL\n 
 printer_variant = 0.35
-start_gcode = \nM108 S0 ; Turn on M2 fans\n; Turn off hotends to reduce ooze on the bed during startup\n; NOTE: this does not explicitly wait for the hotends to completely cool down\nM104 T0 S0\nM104 T1 S0\n\n{if first_layer_bed_temperature[1] < first_layer_bed_temperature[0]}\nM140 S{first_layer_bed_temperature[0]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[0]}	   ; Wait for bed to reach temperature\n{endif}\n\n{if first_layer_bed_temperature[0] < first_layer_bed_temperature[1]}\nM140 S{first_layer_bed_temperature[1]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[1]}	   ; Wait for bed to reach temperature\n{endif}\n\nT1 ; Switch to right extruder offsets for homing\nG28 ; Home all axes\nT0 ; Switch to left extruder\nG1 X0 Y50 Z0.3 F9600 ; Move forward to avoid binder clips\nG1 X200 Z10 F3600 ; Move off platform\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[1]}\n\n; Wait for hotends to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[1]}\n\n\n{if temperature[1] == 0}\n; Single Mode - Left Purge script\n\nG1 Z0.4 ; Position nozzle above buildplate\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge left extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\n{endif}\n\n{if temperature[0] == 0}\n; Single Mode - Right Purge Script\n\nG1 Z0.4 ; Position nozzle above buildplate\nT1 ; Switch to right extruder\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge right extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\n{endif}\n\n{if temperature[0] > 0 and temperature[1] > 0}\n; Dual Mode - Purge Script\nG1 Z0.4 ; Position nozzle above buildplate\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge left extruder\nG92 E0 ; Zero extruder\nT1 ; Set right extruder\nG1 E25 F225 ; Purge right extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\nT0\nG92 E0 ; Zero extruder\n{endif}
+start_gcode = \nM108 S0 ; Turn on M2 fans\n; Turn off hotends to reduce ooze on the bed during startup\n; NOTE: this does not explicitly wait for the hotends to completely cool down\nM104 T0 S0\nM104 T1 S0\n\n{if first_layer_bed_temperature[1] < first_layer_bed_temperature[0]}\nM140 S{first_layer_bed_temperature[0]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[0]}	   ; Wait for bed to reach temperature\n{endif}\n\n{if first_layer_bed_temperature[0] < first_layer_bed_temperature[1]}\nM140 S{first_layer_bed_temperature[1]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[1]}	   ; Wait for bed to reach temperature\n{endif}\n\nT1 ; Switch to right extruder offsets for homing\nG28 ; Home all axes\nT0 ; Switch to left extruder\nG1 X0 Y50 F6000 ; Move forward to avoid binder clips\nG1 X200 Z10 F3600 ; Move off platform\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[1]}\n\n; Wait for hotends to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[1]}\n\n\n{if temperature[1] == 0}\n; Single Mode - Left Purge script\n\nG1 Z0.4 ; Position nozzle above buildplate\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge left extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\n{endif}\n\n{if temperature[0] == 0}\n; Single Mode - Right Purge Script\n\nG1 Z0.4 ; Position nozzle above buildplate\nT1 ; Switch to right extruder\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge right extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\n{endif}\n\n{if temperature[0] > 0 and temperature[1] > 0}\n; Dual Mode - Purge Script\nG1 Z0.4 ; Position nozzle above buildplate\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge left extruder\nG92 E0 ; Zero extruder\nT1 ; Set right extruder\nG1 E25 F225 ; Purge right extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\nT0\nG92 E0 ; Zero extruder\n{endif}
 # thumbnails = 16x16,220x124
 
 [printer:MakerGear M2 Dual 0.25 Nozzle]
@@ -1390,7 +1396,7 @@ nozzle_diameter = 0.35
 printer_model = MAKERGEAR_M3_SE
 printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M3_SE\n 
 printer_variant = 0.35
-start_gcode = G28 ; home all axes\nG1 X215 Y40 Z0.1 F10000 ; move off the bed and bring the bed up\nM109 S[first_layer_temperature_[current_extruder]]\nG92 E0 ; zero extruder\nG1 X195 Z0.1 F1000; scrape off any ooze\nG1 Z5 ; lift\nG1 X170 Y3 F10000; move to unused front edge\nG1 Z0.30 F1000\n\nG1 X40 E20 F1000\nG1 X30 Z0.05 F1000 ; wipe off tail\nG1 Z1\nG92 E0\nM211 S0 ;disable software endstops\n; ok now you can start 
+start_gcode = G28 ; home all axes\nG1 X215 Y40 Z0.1 F10000 ; move off the bed and bring the bed up\nM109 S[first_layer_temperature_[current_extruder]]\nG92 E0 ; zero extruder\nG1 X195 Z0.1 F1000; scrape off any ooze\nG1 Z5 ; lift\nG1 X170 Y3 F10000; move to unused front edge\nG1 Z0.30 F1000\nG1 X40 E20 F1000\nG1 X30 Z0.05 F1000 ; wipe off tail\nG1 Z1\nG92 E0\nM211 S0 ;disable software endstops\n; ok now you can start 
 # thumbnails = 16x16,220x124
 
 [printer:MakerGear M3 Single Extruder 0.25 Nozzle]

resources/profiles/PapapiuLab.idx

@@ -1,2 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0
+min_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha1
 0.1.0 Initial version

resources/profiles/PapapiuLab.ini

@@ -2,11 +2,12 @@
 [vendor]
 repo_id = non-prusa-fff
 name = Papapiu
-config_version = 0.1.0
+config_version = 1.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PapapiuLab/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/PapapiuLab/
 
 
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/PapapiuLab/
 [printer_model:Papapiu_N1S]
 name = Papapiu N1S
 variants = 0.4

resources/profiles/Print4Taste.idx

@@ -1,2 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha1
 0.0.1 Initial version

resources/profiles/Print4Taste.ini

@@ -7,15 +7,16 @@ repo_id = non-prusa-fff
 name = Print4Taste
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.1
+config_version = 1.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Print4Taste/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Print4Taste/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Print4Taste/
 [printer_model:MC2.0]
 name = mycusini 2.0
 variants = 1.0
@@ -25,6 +26,7 @@ bed_model = MC2.0_bed.stl
 bed_texture = MC2.0_texture.svg
 default_materials = mycusini 3D Choco @MC2.0
 
+thumbnail = MC2.0_thumbnail.png
 [print:*common_MC2.0*]
 bottom_solid_layers = 2
 bridge_speed = 30

resources/profiles/RatRig.idx

@@ -1,3 +1,7 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.1 RatRig official update, V-Core 4 added, PunkFil filament line
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.7.0
 1.0.3 Updated flavor. Updated start g-code.
 min_slic3r_version = 2.4.1-alpha0

resources/profiles/Rigid3D.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+min_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha5
 1.0.1 General rework. Fix start gcodes.
 min_slic3r_version = 2.6.0-alpha0

resources/profiles/Rigid3D.ini

@@ -6,15 +6,16 @@ repo_id = non-prusa-fff
 name = Rigid3D
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.1
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Rigid3D/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Rigid3D/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Rigid3D/
 [printer_model:Zero2]
 name = Rigid3D Zero2
 variants = 0.4
@@ -24,6 +25,7 @@ bed_model = zero_bed.stl
 bed_texture = zero2_bed.png
 default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
 
+thumbnail = Zero2_thumbnail.png
 [printer_model:Zero3]
 name = Rigid3D Zero3
 variants = 0.4
@@ -33,6 +35,7 @@ bed_model = zero_bed.stl
 bed_texture = zero3_bed.png
 default_materials =Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
 
+thumbnail = Zero3_thumbnail.png
 [printer_model:Mucit]
 name = Rigid3D Mucit
 variants = 0.4
@@ -42,6 +45,7 @@ bed_model = mucit_bed.stl
 bed_texture = mucit_bed.png
 default_materials = Generic PLA @Rigid3D; Rigid3D PLA @Rigid3D
 
+thumbnail = Mucit_thumbnail.png
 [printer_model:Mucit2]
 name = Rigid3D Mucit2
 variants = 0.4
@@ -55,6 +59,7 @@ default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Ri
 # not make it into the user interface.
 
 # Common print preset
+thumbnail = Mucit2_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0

resources/profiles/Snapmaker.idx

@@ -1,4 +1,9 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.1 Add support BracingKit for Snapmaker 2. Add support Artisan.
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0
+1.1.2 Add support BracingKit for Snapmaker 2. Add support Artisan.
 1.1.1 Fixed overhang speeds. Fixed branch diameter angle for organic supports.
 1.1.0 Add more Snapmaker printers.
 min_slic3r_version = 2.4.1

resources/profiles/Sovol.idx

@@ -1,2 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0
 1.0.0 Initial Sovol bundle

resources/profiles/Sovol.ini

@@ -8,16 +8,17 @@ name = Sovol
 
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.0
+config_version = 2.0.0
 
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Sovol/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Sovol/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Sovol/
 [printer_model:SV06]
 name = SV06
 variants = 0.4; 0.3; 0.6; 0.8
@@ -27,6 +28,7 @@ bed_model = SV06_bed.stl
 bed_texture = SV06_texture.svg
 default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
 
+thumbnail = SV06_thumbnail.png
 [printer_model:SV06 PLUS]
 name = SV06 PLUS
 variants = 0.4; 0.3; 0.6; 0.8
@@ -36,6 +38,7 @@ bed_model = SV06PLUS_bed.stl
 bed_texture = SV06PLUS_texture.svg
 default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
 
+thumbnail = SV06 PLUS_thumbnail.png
 [printer_model:SV05]
 name = SV05
 variants = 0.4; 0.3; 0.6; 0.8
@@ -45,6 +48,7 @@ bed_model = SV05_bed.stl
 bed_texture = SV03_texture.svg
 default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
 
+thumbnail = SV05_thumbnail.png
 [printer_model:SV04]
 name = SV04
 variants = 0.4; 0.3; 0.6; 0.8
@@ -54,6 +58,7 @@ bed_model = SV04_bed.stl
 bed_texture = SV03_texture.svg
 default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
 
+thumbnail = SV04_thumbnail.png
 [printer_model:SV03]
 name = SV03 / SV03 BLTOUCH
 variants = 0.4; 0.3; 0.6; 0.8
@@ -63,6 +68,7 @@ bed_model = SV03_bed.stl
 bed_texture = SV03_texture.svg
 default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
 
+thumbnail = SV03_thumbnail.png
 [printer_model:SV02]
 name = SV02 / SV02 BLTOUCH
 variants = 0.4; 0.3; 0.6; 0.8
@@ -72,6 +78,7 @@ bed_model = SV01_bed.stl
 bed_texture = SV03_texture.svg
 default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
 
+thumbnail = SV02_thumbnail.png
 [printer_model:SV01]
 name = SV01 / SV01 BLTOUCH
 variants = 0.4; 0.3; 0.6; 0.8
@@ -81,6 +88,7 @@ bed_model = SV01_bed.stl
 bed_texture = SV03_texture.svg
 default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
 
+thumbnail = SV01_thumbnail.png
 [printer_model:SV01 PRO]
 name = SV01 PRO
 variants = 0.4; 0.3; 0.6; 0.8
@@ -95,6 +103,7 @@ default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL;
 
 # Common print presets
 
+thumbnail = SV01 PRO_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 thick_bridges = 0

resources/profiles/Templates.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha0
 1.0.5 Added Filament PM filaments. Added Prusament PETG V0.
 1.0.4 Updated compatible printer condition.

resources/profiles/Templates.ini

@@ -3,12 +3,13 @@
 [vendor]
 repo_id = non-prusa-fff
 name = Templates
-config_version = 1.0.5
+config_version = 2.0.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Templates/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Templates/
 templates_profile = 1
 
 ## Generic filament profiles
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Templates/
 [filament:*common*]
 cooling = 1
 compatible_printers = 

resources/profiles/TriLAB.idx

@@ -1,4 +1,11 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
+min_slic3r_version = 2.5.2-alpha0
+1.0.5 Fixed chamber heating for AzteQ Industrial, Fixed material type for Polymaker PC, Fixed print area size
+1.0.4 Added new printer AzteQ Dynamic, Added AzteQ Dynamic material profiles for Prusament ASA, Prusa EasyABS, Prusament PLA, Prusament PETG, Smartfil PLA, Prusament PETG Carbon Fiber, Added AzteQ Industrial material profiles for Prusa EasyABS, Filament PM PAJet 160, Prusament PLA, Prusament PETG, Prusament PA11 Carbon Fiber, Smartfil PLA, Prusament PETG Carbon Fiber, Added DeltiQ 2 material profiles for Prusament PA11 Carbon Fiber, Prusament PC Blend Carbon Fiber, Prusament PETG, Fiberlogy Nylon PA12+CF15, Fiberlogy Nylon PA12+GF15, Prusament PVB, Prusament PC Blend Carbon Fiber 0.6 nozzle, Fiberlogy Nylon PA12+CF15 0.6 nozzle, Fiberlogy Nylon PA12+GF15 0.6 nozzle, Added FlexPrint 2 material profiles for Fiberlogy PP, NinjaTek TPU 75D, Changing the names of materials, Some minor print styles improvements
 min_slic3r_version = 2.5.0-alpha0
+1.0.3 Added DeltiQ 2 materials PETG (Prusa Polymers), PA11 Carbon Fiber (Prusa Polymers), PC Blend Carbon Fiber (Prusa Polymers), Improved DeltiQ 2 material PLA Prusament, Improved output filename template(added filament used weight, fixed timestamp, fixed invalid printhead code)
 1.0.2 Added home to start gcode before heating bed, added DeltiQ 2 material PLA Prusament, fixed gcode for pause print, improved output filename template(added printhead code, added filament used length, truncated timestamp)
 min_slic3r_version = 2.4.1-rc1
 1.0.1 Fix missing AzteQ Industrial ABS material for 0.6, 0.8 nozzle, enabled elefant foot compensation

resources/profiles/Trimaker.idx

@@ -1,3 +1,7 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-beta2
+1.0.2 modification in start gcode and end gcode
 1.0.1 Speed profile has been added
 1.0.0 Initial version

resources/profiles/Trimaker.ini

@@ -6,15 +6,16 @@ repo_id = non-prusa-fff
 name = Trimaker
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.1
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Trimaker/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Trimaker/
 # changelog_url =
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Trimaker/
 [printer_model:Trimaker Nebula Cloud]
 name = Trimaker Nebula Cloud
 family = Nebula
@@ -351,8 +352,8 @@ retract_speed = 35
 serial_port = 
 serial_speed = 250000
 single_extruder_multi_material = 0
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 F3000 X0.5 Y0.5\nG1 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
-end_gcode =;printing object ENDGCODE\n M107; Apagamos fan\n G90\n G92 E0\n G1 X0 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n
+end_gcode =;printing object ENDGCODE\n M107; Apagamos fan\n G90\n G92 E0\n G1 X200 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -372,7 +373,7 @@ printer_model = Trimaker Nebula Cloud
 inherits = *common*
 bed_shape = 0x0,230x0,230x230,0x230
 max_print_height = 260
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 F3000 X0.5 Y0.5\nG1 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
 printer_model = Trimaker Nebula
 
 [printer:*Trimaker Cosmos II*]

resources/profiles/Ultimaker.idx

@@ -1,3 +1,8 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
+min_slic3r_version = 2.6.0
+1.1.0 Refactored code to have remove duplicate values and match some updated Cura values. Adds Ultimaker 2 DXUv2 mod. Adds Ultimaker S-line printers (S3, S5, S7)
 min_slic3r_version = 2.4.0-beta0
 1.0.2 Fixed start g-code.
 1.0.1 Updated start g-code.

resources/profiles/Ultimaker.ini

@@ -1,7 +1,7 @@
 # Print profiles for the Ultimaker printers.
 # https://github.com/prusa3d/PrusaSlicer-settings/issues/143
 # author: https://github.com/foreachthing
-
+# author: https://github.com/ansonl
 
 [vendor]
 repo_id = non-prusa-fff
@@ -10,27 +10,37 @@ name = Ultimaker
 
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.2
+config_version = 2.0.0
 
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Ultimaker/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Ultimaker/
 [printer_model:ULTIMAKER2]
 name = Ultimaker 2
 variants = 0.4
 technology = FFF
 bed_model = ultimaker2_bed.stl
 bed_texture = ultimaker2.svg
-default_materials = Generic PLA @ULTIMAKER2; Generic PETG @ULTIMAKER2; Generic ABS @ULTIMAKER2
+thumbnail = ULTIMAKER2_thumbnail_v2.png
+default_materials = Generic PLA; Generic PETG @ULTIMAKER; Generic ABS @ULTIMAKER
+
+[printer_model:ULTIMAKERSline]
+name = Ultimaker S-line
+variants = 0.4
+technology = FFF
+bed_texture = ultimaker2.svg
+default_materials = Generic PLA
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
 # Common print preset
+thumbnail = ULTIMAKERSline_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 1
 avoid_crossing_perimeters_max_detour = 0
@@ -40,7 +50,7 @@ bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
 bridge_flow_ratio = 1
-bridge_speed = 60
+bridge_speed = 35
 brim_separation = 0
 brim_type = outer_only
 brim_width = 0
@@ -51,24 +61,24 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 0
 draft_shield = disabled
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.08
 ensure_vertical_shell_thickness = 0
-external_perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.4
-external_perimeter_speed = 75%
+external_perimeter_speed = 50%
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 50
 extruder_clearance_radius = 60
-extrusion_width = 0.45
+extrusion_width = 0.4
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
 first_layer_acceleration = 0
 first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.45
+first_layer_extrusion_width = 0.4
 first_layer_height = 0.2
-first_layer_speed = 30
+first_layer_speed = 25%
-first_layer_speed_over_raft = 30
+first_layer_speed_over_raft = 25%
 fuzzy_skin = none
 fuzzy_skin_point_dist = 0.8
 fuzzy_skin_thickness = 0.3
@@ -81,11 +91,11 @@ infill_anchor = 600%
 infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.5
+infill_extrusion_width = 0.4
 infill_first = 1
 infill_only_where_needed = 0
 infill_overlap = 35%
-infill_speed = 60
+infill_speed = 70
 inherits = 
 interface_shells = 0
 ironing = 0
@@ -94,18 +104,18 @@ ironing_spacing = 0.1
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
-max_print_speed = 80
+max_print_speed = 100
 max_volumetric_speed = 0
 min_skirt_length = 2
 mmu_segmented_region_max_width = 0
-notes = Ultimaker 2, 0.4 mm Nozzle
+notes = Ultimaker, 0.4 mm Nozzle
 only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
+ooze_prevention = 1
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
+perimeter_extrusion_width = 0.4
 perimeter_speed = 50
 perimeters = 2
 post_process = 
@@ -127,10 +137,10 @@ small_perimeter_speed = 75%
 solid_infill_below_area = 10
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.4
-solid_infill_speed = 40
+solid_infill_speed = 75%
 spiral_vase = 0
-standby_temperature_delta = -5
+standby_temperature_delta = -30
 support_material = 0
 support_material_angle = 45
 support_material_auto = 1
@@ -160,11 +170,11 @@ thick_bridges = 1
 thin_walls = 0
 threads = 8
 top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
+top_solid_infill_speed = 50%
 top_solid_layers = 4
 top_solid_min_thickness = 0
-travel_speed = 120
+travel_speed = 150
 travel_speed_z = 0
 wipe_tower = 0
 wipe_tower_bridging = 10
@@ -176,67 +186,49 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+bottom_solid_layers = 8
+top_solid_layers = 8
 
 [print:*0.12mm*]
 inherits = *common*
-perimeter_speed = 40
-external_perimeter_speed = 25
-infill_speed = 50
-solid_infill_speed = 40
 layer_height = 0.12
 perimeters = 3
-top_infill_extrusion_width = 0.4
 bottom_solid_layers = 6
 top_solid_layers = 7
 
 [print:*0.20mm*]
 inherits = *common*
-perimeter_speed = 40
-external_perimeter_speed = 25
-infill_speed = 50
-solid_infill_speed = 40
 layer_height = 0.20
-top_infill_extrusion_width = 0.4
 bottom_solid_layers = 4
 top_solid_layers = 5
 
 [print:*0.25mm*]
 inherits = *common*
-perimeter_speed = 40
-external_perimeter_speed = 25
-infill_speed = 50
-solid_infill_speed = 40
 layer_height = 0.25
-top_infill_extrusion_width = 0.45
 bottom_solid_layers = 3
 top_solid_layers = 4
 
-[print:0.12mm DETAIL @ULTIMAKER2]
+[print:0.10mm FINE @ULTIMAKER]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
+
+[print:0.12mm DETAIL @ULTIMAKER]
 inherits = *0.12mm*
-travel_speed = 150
-infill_speed = 50
-solid_infill_speed = 40
-top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
 
-[print:0.20mm NORMAL @ULTIMAKER2]
+[print:0.20mm NORMAL @ULTIMAKER]
 inherits = *0.20mm*
-travel_speed = 150
-infill_speed = 50
-solid_infill_speed = 40
-top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
 
-[print:0.25mm DRAFT @ULTIMAKER2]
+[print:0.25mm DRAFT @ULTIMAKER]
 inherits = *0.25mm*
-travel_speed = 150
-infill_speed = 50
-solid_infill_speed = 40
-top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
 
 # Common filament preset
 [filament:*common*]
@@ -249,15 +241,15 @@ filament_diameter = 2.85
 filament_notes = ""
 filament_settings_id = ""
 filament_soluble = 0
-min_print_speed = 15
+min_print_speed = 5
-slowdown_below_layer_time = 20
+slowdown_below_layer_time = 6
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ULTIMAKER.*/
 
 [filament:*PLA*]
 inherits = *common*
 bed_temperature = 60
 fan_below_layer_time = 100
-filament_colour = #FFF0E0
+filament_colour = #C0C0C0
 filament_max_volumetric_speed = 0
 filament_type = PLA
 filament_density = 1.24
@@ -274,7 +266,7 @@ temperature = 210
 [filament:*PET*]
 inherits = *common*
 fan_below_layer_time = 15
-filament_colour = #FFF0E0
+filament_colour = #C0C0C0
 filament_max_volumetric_speed = 0
 filament_type = PETG
 filament_density = 1.27
@@ -294,7 +286,7 @@ disable_fan_first_layers = 3
 [filament:*ABS*]
 inherits = *common*
 fan_below_layer_time = 15
-filament_colour = #FFF0E0
+filament_colour = #C0C0C0
 filament_max_volumetric_speed = 0
 filament_type = ABS
 filament_density = 1.10
@@ -311,23 +303,17 @@ slowdown_below_layer_time = 15
 min_print_speed = 10
 disable_fan_first_layers = 3
 
-[filament:Generic PLA @ULTIMAKER2]
+[filament:Generic PLA @ULTIMAKER]
 inherits = *PLA*
 filament_vendor = Generic
 filament_cost = 
 
-[filament:Generic Black PLA @ULTIMAKER2]
+[filament:Generic PETG @ULTIMAKER]
-inherits = *PLA*
-filament_vendor = Generic
-filament_colour = #0E3F3F
-filament_cost = 
-
-[filament:Generic PETG @ULTIMAKER2]
 inherits = *PET*
 filament_vendor = Generic
 filament_cost = 
 
-[filament:Generic ABS @ULTIMAKER2]
+[filament:Generic ABS @ULTIMAKER]
 inherits = *ABS*
 filament_vendor = Generic
 filament_cost = 
@@ -335,54 +321,52 @@ filament_cost =
 # Common printer preset
 [printer:*common*]
 printer_technology = FFF
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;layer:[layer_num];\nM117 Layer [layer_num];\n
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;M117 Layer [layer_num];\n;LAYER:[layer_num]
 between_objects_gcode = 
 deretract_speed = 0
-extruder_colour = #FFF0E0
+extruder_colour = #F9A800;#00387B
-extruder_offset = 0x0
+gcode_flavor = marlin
-gcode_flavor = reprap
 silent_mode = 0
 remaining_times = 0
 machine_max_acceleration_e = 10000
-machine_max_acceleration_extruding = 1500
+machine_max_acceleration_extruding = 3000
-machine_max_acceleration_retracting = 1500
+machine_max_acceleration_retracting = 3000
-machine_max_acceleration_x = 3000
+machine_max_acceleration_x = 9000
-machine_max_acceleration_y = 3000
+machine_max_acceleration_y = 9000
-machine_max_acceleration_z = 500
+machine_max_acceleration_z = 100
 machine_max_feedrate_e = 120
-machine_max_feedrate_x = 500
+machine_max_feedrate_x = 300
-machine_max_feedrate_y = 500
+machine_max_feedrate_y = 300
-machine_max_feedrate_z = 12
+machine_max_feedrate_z = 40
-machine_max_jerk_e = 2.5
+machine_max_jerk_e = 10
 machine_max_jerk_x = 20
 machine_max_jerk_y = 20
 machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 layer_gcode = 
-max_print_height = 212
 octoprint_apikey = 
 octoprint_host = 
 printer_notes = 
 printer_settings_id = 
-retract_before_travel = 5
+retract_before_travel = 1.2,1.2
-retract_before_wipe = 0%
+retract_before_wipe = 0%,0%
 retract_layer_change = 1
-retract_length = 6
+retract_length = 6.5,6.5
-retract_length_toolchange = 10
+retract_length_toolchange = 16,16
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 50
+retract_speed = 25,25
 serial_port = 
 single_extruder_multi_material = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
-variable_layer_height = 1
+variable_layer_height = 0
 wipe = 0
 z_offset = 0
 
@@ -390,12 +374,59 @@ z_offset = 0
 inherits = *common*
 printer_model = ULTIMAKER2
 bed_shape = 0x0,224x0,224x225,0x225
+max_print_height = 212
 printer_variant = 0.4
-max_layer_height = 0.3
-min_layer_height = 0.08
 printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKER2
 nozzle_diameter = 0.4
-default_print_profile = 0.20mm NORMAL @ULTIMAKER2
+default_print_profile = 0.20mm NORMAL @ULTIMAKER
-default_filament_profile = Generic PLA @ULTIMAKER2
+default_filament_profile = Generic PLA @ULTIMAKER
 start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 		; metric values\nG90 		; absolute positioning\nM82 		; set extruder to absolute mode\nM107 		; start with the fan off\n\nM140 S[first_layer_bed_temperature]	; start bed heating\n\nG28 X0 Y0 Z0	; move X/Y/Z to endstops\nG1 X1 Y6 F15000	; move X/Y to start position\nG1 Z35 F9000	; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5}	; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature]	; continue bed heating\nM109 S[first_layer_temperature]	; wait for nozzle temperature\n\n; Purge and prime\nM83 		; set extruder to relative mode\nG92 E0           ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000    \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50         ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000  ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600        ; drag filament to decompress bowden tube\nG1 X100 F3200       ; wipe backwards a bit\nG1 X150 F3200       ; back to where there is no plastic: avoid dragging\nG92 E0           ; reset extruder reference\nM82 		; set extruder to absolute mode\n\n; # # # # # # END Header
 end_gcode = ; # # # # # # START Footer\nG91 			; relative coordinates\n;G1 E-1 F1200		; retract the filament\nG1 Z+15  X-10 Y-10 E-7  F6000		; move Z a bit\n; G1 X-10 Y-10 F6000	; move XY a bit\nG1 E-5.5 F300		; retract the filament\nG28 X0 Y0		; move X/Y to min endstops, so the head is out of the way\nM104 S0			; extruder heater off\nM140 S0			; heated bed heater off (if you have it)\nM84 			; disable motors\n; # # # # # # END Footer\n
+max_layer_height = 0.3
+min_layer_height = 0.06
+
+[printer:Ultimaker 2 DXUv2]
+inherits = Ultimaker 2
+printer_model = ULTIMAKER2
+bed_shape = 0x0,224x0,224x225,0x225
+extruder_offset = 0x0,0x0 ; stock DXUv2 offset is X18 Y0 but this should be applied in firmware and PS does not provide option to turn off extruder offset correction so we leave it at 0 in slicer
+printer_variant = 0.4
+nozzle_diameter = 0.4,0.4
+gcode_flavor = marlin2
+default_print_profile = 0.20mm NORMAL @ULTIMAKER
+default_filament_profile = Generic PLA @ULTIMAKER
+toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}
+start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n; DXUv2 improved PS start priming Gcode for dual nozzles for multi-material print\nM355 S1 P25 ; Turn on case light dim\nM190 S[first_layer_bed_temperature]\nG28 ; Home all\n;M420 S1 ; Enable and load bed mesh\nG29 ; Run automatic bed leveling. Comment this line out if auto bed leveling is not desired.\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Preheat T0 to standby temp\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Preheat T1 to standby temp\nG21 ; Metric values\nG90 ; Absolute positioning\nM82 ; Set extruder to absolute mode\nM107 ; Start with the fan off\nM200 D0 T0 ; Reset filament diameter\nM200 D0 T1 ; Reset filament diameter\nG0 X200 F7200 ; Move to safe X and Y location from right side after ending ABL homing. Move X before Y to avoid hitting switching lever.\nG1 Y150 F7200\n; Prime routine for T1 in normally \nT1 ; move to the nozzle 2\nM104 T1 S{temperature[1]} ; Start heating up T1\nG0 Z10 F2400 ; move the platform down to 10mm\nM109 T1 S{temperature[1]} ; Heat up and wait for T1\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X50 Y1 F7200 ; Add HOTEND_OFFSET_Y index 1 to Y0 (or forward-most safe Y location when T1 is active) to get Gcode Y parameter\nG0 X95 Z0.3 F2400 ; lower nozzle\nG92 E0 ; reset E location\nG1 X225 Y1 Z0.3 E{retract_length_toolchange[1]} F1500 ; Add HOTEND_OFFSET_X index 1 to X217 (or right-most safe X location when T1 is active) to get actual Gcode X parameter.\nG3 X235 Y11 I0 J10 F7200\nG0 X235 Y11 Z0.3 F7200\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0\nG1 Y70 E3 F1000 ; intro line\nM104 T1 S{temperature[1] + standby_temperature_delta}\nG92 E0 \nG1 E-{retract_length_toolchange[1]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Prime routine for T0\nT0 ; move to the nozzle 1\nM104 T0 S{temperature[0]} ; Start heating up T0\nG0 Z10 F2400\nM109 T0 S{temperature[0]}\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X32 Y3 F7200\nG0 X77 Z0.3 F2400\nG92 E0 ; reset E location\nG1 X207 Y3 Z0.3 E{retract_length_toolchange[0]} F1500\nG3 X217 Y13 I0 J10 F7200\nG0 X217 Y13 Z0.3 F7200\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0 ; reset E location\nG1 Y72 E3 F1000 ; intro line\nM104 T0 S{temperature[0] + standby_temperature_delta}\nM104 T{initial_extruder} S{temperature[initial_extruder]} ; Start heating initial nozzle. Do not wait.\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Final prime and wipe sequence for initial extruder (usually T0)\nT{initial_extruder} ; move to the initial nozzle used for print\nM400 ;finish all moves\nG0 Z20 F2400\nG0 X212 F7200\nG0 Y70 F7200\nM109 T{initial_extruder} S{temperature[initial_extruder]} ; Wait for initial nozzle to reach temp\nG92 E0\nG1 E{retract_length_toolchange[initial_extruder]} F1200 ; prime by switching length\nG0 X217 Y50 Z0.5 F7200\nG92 E0\nG0 Y9.4 Z0.5 E3 F7200\nG2 X212 Y3.4 Z0.4 I-6 J0 F7200\nM104 T{initial_extruder} S{first_layer_temperature[initial_extruder]} ; Start heating to first layer temp\nG0 X207 Y3.4 Z0.4 F7200\nG2 X205 Y5.4 Z0.3 I0 J2 F7200\nG0 X205 Y5.4 Z0.3 F7200\nG1 Y10 F18000 ; break line\nG92 E0\nG1 Y50 E2 F1000 ; extrude line\nG92 E0\nG1 E-0.5 F1500 ; retract slightly\nG1 Y100 F18000 ; break line\nG92 E0\nM355 S1 P255; Turn on case light brighter\n;end of startup sequence
+end_gcode = ;End G-code\nG91 ;Relative movement\nG0 X-8.0 Y-8.0 Z3.5 E-4.5 F18000 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement\nM400 ;wait for all moves in planner to complete\nG90 ;absolute positioning\nM104 S0 T0 ;extruder heater off\nM104 S0 T1\nM140 S0 ;turn off bed\nT0 ; move to the first head\nG27; park toolhead\nM107 ;fan off\nM355 S0;turn off case light
+max_layer_height = 0.3
+min_layer_height = 0.06
+
+[printer:*sline*]
+printer_model = ULTIMAKERSline
+extruder_offset = 0x0,22x0
+printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKERSline
+toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nG91\nG0 Z2\nG90\nM82\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}\n\nG91\nG0 Z-2\nG90\nM82\nG92 E0 ; reset extrusion distance
+start_gcode = ; Delete the first 'generated by PrusaSlicer' line to make gcode printable on Ultimaker S-line\n\n;START_OF_HEADER\n; Printer_Settings_ID: [printer_settings_id]\n\n;ULTIMAKER GRIFFIN HEADER\n;HEADER_VERSION:0.1\n;FLAVOR:Griffin\n;GENERATOR.NAME:PrusaSlicer\n;GENERATOR.VERSION:5.4.0\n;GENERATOR.BUILD_DATE:{year}-{month}-{day}\n;TARGET_MACHINE.NAME:Ultimaker S7\n;EXTRUDER_TRAIN.0.INITIAL_TEMPERATURE:{first_layer_temperature[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.VOLUME_USED:{extruded_volume[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.0.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.0.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.INITIAL_TEMPERATURE:{temperature[1] + standby_temperature_delta}\n;EXTRUDER_TRAIN.1.MATERIAL.VOLUME_USED:{extruded_volume[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.1.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;BUILD_PLATE.INITIAL_TEMPERATURE:[first_layer_bed_temperature]\n;BUILD_VOLUME.TEMPERATURE:28\n;PRINT.TIME:0\n;PRINT.GROUPS:1\n;PRINT.SIZE.MIN.X:{print_bed_min[0]}\n;PRINT.SIZE.MIN.Y:{print_bed_min[1]}\n;PRINT.SIZE.MIN.Z:0\n;PRINT.SIZE.MAX.X:{print_bed_max[0]}\n;PRINT.SIZE.MAX.Y:{print_bed_max[1]}\n;PRINT.SIZE.MAX.Z:{max_print_height}\n;SLICE_UUID:32daaf1d-f868-4a8e-ad06-8536b153e789\n;END_OF_HEADER\nT0\nM82 ;absolute extrusion mode\n\nG21 ; metric values\nG90 ; absolute positioning\nM107 ; start with the fan off\n\nM140 S{first_layer_bed_temperature[initial_extruder]} ; start bed heating\n\nG28 ; home if supported\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; heat nozzle\n\nG280 S1 ; ultimaker home\n\n;To skip adaptive bed mesh probing uncomment G0 commands before ;LAYER:1\n;G0 X{print_bed_min[0]} Y{print_bed_max[1]}\n;G0 X{print_bed_min[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_max[1]}\n;LAYER:1\n\n; purge retract_length_toolchange due to unknown state\n; prime extruders next to each other to verify extruder offset calibration\n\n; prime T0\nM104 S{first_layer_temperature[0]} T0 ; start heat nozzle temperature\nT0\nM109 S{first_layer_temperature[0]} T0 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG92 E0\nG1 X5 Y10 E1.9 F1000\nG0 X5 Y1 Z0.3 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y1 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y1.5 F7200\nG92 E0\nG1 X10 Y1.5 E5.458 F1000\nG0 X10 Y1.9 F7200\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[1]} T1 ; start heat next nozzle temperature\nG92 E0\nG1 X{print_bed_max[0]-28} Y1.9 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 X{print_bed_max[0]-20} Y3 F18000\nG0 X{print_bed_max[0]-15} Y10 Z3 F2400\n\nG0 X30 Y10 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y110 E1.85 F1000\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; prime T1\nT1\nM109 S{first_layer_temperature[1]} T1 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG0 Y10 E1.9 F1000\nG0 Y2.5 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y2.5 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y2.9 F7200\nG92 E0\nG1 X10 Y2.9 E5.458 F1000\nG0 X10 Y3.3 F7200\nM104 S{temperature[1] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[initial_extruder]} ; start heating initial nozzle\nG92 E0\nG1 X{print_bed_max[0]-28} Y3.3 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200 ;retract just a little because we don't have a way to tell the slicer T1 filament position when it starts printing from E0\nG0 X{print_bed_max[0]-20} Y5 F18000\nG0 X{print_bed_max[0]-15} Y15 Z3 F2400\n\n;minus extruder1 offset X 22 which macro is not supported in start gcode\nG0 X{30+nozzle_diameter[1]-22} Y15 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y115 E1.85 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; switch to initial nozzle\nT{initial_extruder}\nM109 S{first_layer_temperature[initial_extruder]} ; wait for nozzle temperature\nG0 X{print_bed_max[0]-30} Y5 Z10 F7200\nG0 X25 Y10 Z5\nG0 X25 Y20 Z0.3\nM82 ;absolute extrusion mode\nG92 E0\nG1 Y30 E{retract_length_toolchange[initial_extruder]} F1200 ;prime to set filament location for prusaslicer generated initial retract\nG92 E0\n\n;END Start-gcode
+end_gcode = ;End-gcode\nM104 S0\nM104 S0 T0\nM104 S0 T1\nG0 X5 Y5 Z{max_print_height} F2000\nM140 S0\nM106 S0\nM84 ; disable motors\n
+max_layer_height = 0.3
+min_layer_height = 0.06
+
+[printer:Ultimaker S3]
+inherits = *common*; *sline*
+printer_model = ULTIMAKERSline
+bed_shape = 0x0,230x0,230x190,0x190
+max_print_height = 200
+printer_variant = 0.4
+nozzle_diameter = 0.4,0.4
+default_print_profile = 0.20mm NORMAL @ULTIMAKER
+default_filament_profile = Generic PLA @ULTIMAKER
+
+[printer:Ultimaker S5/S7]
+inherits = *common*; *sline*
+printer_model = ULTIMAKERSline
+bed_shape = 0x0,330x0,330x240,0x240
+max_print_height = 300
+printer_variant = 0.4
+nozzle_diameter = 0.4,0.4
+default_print_profile = 0.20mm NORMAL @ULTIMAKER
+default_filament_profile = Generic PLA @ULTIMAKER

resources/profiles/Voron.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.6.0-alpha6
 1.0.4 Updated start g-code. Disabled autoemitting of temperature commands.
 1.0.3 Added Voron Switchwire.

resources/profiles/Voron.ini

@@ -8,15 +8,16 @@ repo_id = non-prusa-fff
 name = Voron
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.4
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Voron/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Voron/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Voron/
 [printer_model:Voron_v2_250_afterburner]
 name = Voron v2 250mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -26,6 +27,7 @@ bed_model = printbed-v2-250.stl
 bed_texture = bedtexture-v2-250.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v2_250_afterburner_thumbnail.png
 [printer_model:Voron_v2_300_afterburner]
 name = Voron v2 300mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -35,6 +37,7 @@ bed_model = printbed-v2-300.stl
 bed_texture = bedtexture-v2-300.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v2_300_afterburner_thumbnail.png
 [printer_model:Voron_v2_350_afterburner]
 name = Voron v2 350mm3
 variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -44,6 +47,7 @@ bed_model = printbed-v2-350.stl
 bed_texture = bedtexture-v2-350.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v2_350_afterburner_thumbnail.png
 [printer_model:Voron_v2_250]
 name = Voron v2 250mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -53,6 +57,7 @@ bed_model = printbed-v2-250.stl
 bed_texture = bedtexture-v2-250.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v2_250_thumbnail.png
 [printer_model:Voron_v2_300]
 name = Voron v2 300mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -62,6 +67,7 @@ bed_model = printbed-v2-300.stl
 bed_texture = bedtexture-v2-300.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v2_300_thumbnail.png
 [printer_model:Voron_v2_350]
 name = Voron v2 350mm3
 variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -71,6 +77,7 @@ bed_model = printbed-v2-350.stl
 bed_texture = bedtexture-v2-350.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v2_350_thumbnail.png
 [printer_model:Voron_v1_250_afterburner]
 name = Voron v1 250mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -80,6 +87,7 @@ bed_model = printbed-v1-250.stl
 bed_texture = bedtexture-v1-250.png
 default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
 
+thumbnail = Voron_v1_250_afterburner_thumbnail.png
 [printer_model:Voron_v1_300_afterburner]
 name = Voron v1 300mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -89,6 +97,7 @@ bed_model = printbed-v1-300.stl
 bed_texture = bedtexture-v1-300.png
 default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
 
+thumbnail = Voron_v1_300_afterburner_thumbnail.png
 [printer_model:Voron_v1_350_afterburner]
 name = Voron v1 350mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -98,6 +107,7 @@ bed_model = printbed-v1-350.stl
 bed_texture = bedtexture-v2-350.png 
 default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
 
+thumbnail = Voron_v1_350_afterburner_thumbnail.png
 [printer_model:Voron_v0_120]
 name = Voron Zero 120mm3
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -107,6 +117,7 @@ bed_model = printbed-v0-120.stl
 bed_texture = bedtexture-v0-120.png
 default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
 
+thumbnail = Voron_v0_120_thumbnail.png
 [printer_model:Voron_SW_afterburner]
 name = Voron Switchwire
 variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -1890,4 +1901,3 @@ inherits = *kvpABS*
 filament_vendor = KVP
 filament_max_volumetric_speed = 17
 compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
-

resources/profiles/Zonestar.idx

@@ -1,2 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.4.1
 1.0.0 Initial version

resources/profiles/Zonestar.ini

@@ -8,14 +8,15 @@ repo_id = non-prusa-fff
 name = Zonestar
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.0
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Zonestar/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Zonestar/
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Zonestar/
 [printer_model:Z5]
 name = Zonestar Z5
 variants = 0.4
@@ -24,6 +25,7 @@ bed_model = bed_220.stl
 bed_texture = 220_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
+thumbnail = Z5_thumbnail.png
 [printer_model:Z6]
 name = Zonestar Z6
 variants = 0.4
@@ -32,6 +34,7 @@ bed_model = bed_150.stl
 bed_texture = 150_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
+thumbnail = Z6_thumbnail.png
 [printer_model:Z5X]
 name = Zonestar Z5X
 variants = 0.4
@@ -40,6 +43,7 @@ bed_model = bed_310.stl
 bed_texture = 310_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
+thumbnail = Z5X_thumbnail.png
 [printer_model:Z8]
 name = Zonestar Z8
 variants = 0.4
@@ -48,6 +52,7 @@ bed_model = bed_310.stl
 bed_texture = 310_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
+thumbnail = Z8_thumbnail.png
 [printer_model:Z9]
 name = Zonestar Z9
 variants = 0.4
@@ -60,6 +65,7 @@ default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @
 ####   print   ####
 ###################
 
+thumbnail = Z9_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0

resources/profiles/gCreate.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
 min_slic3r_version = 2.4.0-alpha0
 1.0.1 Speed improvements, start gcode changes, added HIPS filament.
 1.0.0 Initial version

resources/profiles/gCreate.ini

@@ -9,9 +9,9 @@ repo_id = non-prusa-fff
 name = gCreate
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.1
+config_version = 2.0.0
 # Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/gCreate/
+config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/gCreate/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
@@ -28,6 +28,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 #  Common filament settings > common filament settings based on type > Specific settings based on vendor   
 #
 
+config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/gCreate/
 [printer_model:GMAX15P]
 name = gMax 1.5XT Plus
 variants = 0.5; 0.3; 0.4; 0.8; 1.0
@@ -37,6 +38,7 @@ bed_model = gmax15p_bed.stl
 bed_texture = gmax15p.svg
 default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
 
+thumbnail = GMAX15P_thumbnail.png
 [printer_model:GMAX2]
 name = gMax 2
 variants = 0.5; 0.3; 0.4; 0.8; 1.0
@@ -48,6 +50,7 @@ bed_texture = gmax2.svg
 default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
 
 
+thumbnail = GMAX2_thumbnail.png
 [printer_model:GMAX2PRO]
 name = gMax 2 Pro
 variants = 0.5; 0.3; 0.4; 0.8; 1.0
@@ -58,6 +61,7 @@ bed_model = gmax2_bed.stl
 bed_texture = gmax2.svg
 default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
 
+thumbnail = GMAX2PRO_thumbnail.png
 [printer_model:GMAX2DUAL2IN1]
 name = gMax 2 Dual 2in1
 variants = 0.5
@@ -68,6 +72,7 @@ bed_model = gmax2_bed.stl
 bed_texture = gmax2.svg
 default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
 
+thumbnail = GMAX2DUAL2IN1_thumbnail.png
 [printer_model:GMAX2DUAL]
 name = gMax 2 Dual Chimera
 variants = 0.5
@@ -82,6 +87,7 @@ default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GC
 # not make it into the user interface.
 
 # Common print presets for every printer model. will be overtaken by presets further down that are printer, filament nozzle or layer height specific
+thumbnail = GMAX2DUAL_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bridge_angle = 0