mirror of
https://git.mirrors.martin98.com/https://github.com/prusa3d/PrusaSlicer.git
synced 2025-08-18 02:35:55 +08:00
updated indexes and inis
This commit is contained in:
David Kocik
parent
2f937a4e83
commit
7a41ad4937
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha4
|
||||
1.1.3 Fixed top solid infill extrusion width for M5C.
|
||||
1.1.2 Added AnkerMake M5C.
|
||||
|
||||
@ -6,15 +6,16 @@ repo_id = non-prusa-fff
|
||||
name = AnkerMake
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.1.3
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anker/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anker/
|
||||
[printer_model:M5]
|
||||
name = AnkerMake M5
|
||||
variants = 0.4
|
||||
@ -674,4 +675,4 @@ printer_variant = 0.4
|
||||
min_layer_height = 0.08
|
||||
max_layer_height = 0.32
|
||||
retract_lift_above = 0
|
||||
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
|
||||
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-beta1
|
||||
0.2.8 Fixed compatible printer condition.
|
||||
0.2.7 Fixed compatible condition for MONO X.
|
||||
|
||||
@ -6,15 +6,16 @@ repo_id = non-prusa-fff
|
||||
name = Anycubic
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.2.8
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anycubic/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anycubic/
|
||||
[printer_model:AKLP]
|
||||
name = Anycubic Kossel Linear Plus
|
||||
variants = 0.4
|
||||
@ -24,6 +25,7 @@ bed_model = AKLP_Bed.stl
|
||||
bed_texture = AK.svg
|
||||
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
|
||||
|
||||
thumbnail = AKLP_thumbnail.png
|
||||
[printer_model:AK]
|
||||
name = Anycubic Kossel Pulley (Linear)
|
||||
variants = 0.4
|
||||
@ -33,6 +35,7 @@ bed_model = AK_Bed.stl
|
||||
bed_texture = AK.svg
|
||||
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
|
||||
|
||||
thumbnail = AK_thumbnail.png
|
||||
[printer_model:MEGA0]
|
||||
name = Anycubic Mega Zero
|
||||
variants = 0.4
|
||||
@ -42,6 +45,7 @@ bed_model = mega0_bed.stl
|
||||
bed_texture = mega0.svg
|
||||
default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0
|
||||
|
||||
thumbnail = MEGA0_thumbnail.png
|
||||
[printer_model:I3MEGA]
|
||||
name = Anycubic i3 Mega
|
||||
variants = 0.4
|
||||
@ -50,6 +54,7 @@ family = MEGA
|
||||
bed_model = i3megas_bed.stl
|
||||
bed_texture = i3megas.svg
|
||||
|
||||
thumbnail = I3MEGA_thumbnail.png
|
||||
[printer_model:I3MEGAS]
|
||||
name = Anycubic i3 Mega S
|
||||
variants = 0.4
|
||||
@ -58,6 +63,7 @@ family = MEGA
|
||||
bed_model = i3megas_bed.stl
|
||||
bed_texture = i3megas.svg
|
||||
|
||||
thumbnail = I3MEGAS_thumbnail.png
|
||||
[printer_model:4MAXPRO20]
|
||||
name = Anycubic 4Max Pro 2.0
|
||||
variants = 0.4
|
||||
@ -67,6 +73,7 @@ bed_model = 4MAXPRO20_bed.stl
|
||||
bed_texture = 4MAXPRO20_texture.svg
|
||||
default_materials = Generic PLA @4Max Pro 2.0; Generic TPU @4Max Pro 2.0; Generic ABS @4Max Pro 2.0
|
||||
|
||||
thumbnail = 4MAXPRO20_thumbnail.png
|
||||
[printer_model:PREDATOR]
|
||||
name = Anycubic Predator
|
||||
variants = 0.4; 0.6; 0.8
|
||||
@ -74,34 +81,6 @@ technology = FFF
|
||||
family = PREDATOR
|
||||
default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR
|
||||
|
||||
[printer_model:PHOTON MONO]
|
||||
name = Photon Mono
|
||||
variants = default
|
||||
technology = SLA
|
||||
family = PHOTON MONO
|
||||
default_materials = Generic Blue Resin @MONO 0.05
|
||||
|
||||
[printer_model:PHOTON MONO X]
|
||||
name = Photon Mono X
|
||||
variants = default
|
||||
technology = SLA
|
||||
family = PHOTON MONO
|
||||
default_materials = Generic Blue Resin @MONO 0.05
|
||||
|
||||
[printer_model:PHOTON MONO X 6K]
|
||||
name = Photon Mono X 6K
|
||||
variants = default
|
||||
technology = SLA
|
||||
family = PHOTON MONO
|
||||
default_materials = Anycubic Plant-based UV Resin Grey 23 @MONO 0.05
|
||||
|
||||
[printer_model:PHOTON MONO SE]
|
||||
name = Photon Mono SE
|
||||
variants = default
|
||||
technology = SLA
|
||||
family = PHOTON MONO
|
||||
default_materials = Generic Blue Resin @MONO 0.05
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
@ -110,6 +89,7 @@ default_materials = Generic Blue Resin @MONO 0.05
|
||||
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220
|
||||
|
||||
# Common print preset
|
||||
thumbnail = PREDATOR_thumbnail.png
|
||||
[print:*common_akossel*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_solid_min_thickness = 0.5
|
||||
@ -2345,228 +2325,3 @@ use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
||||
## SLA printers
|
||||
|
||||
[sla_print:*common print ANYCUBIC SLA*]
|
||||
compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/
|
||||
layer_height = 0.05
|
||||
pad_edge_radius = 0.5
|
||||
pad_enable = 1
|
||||
pad_max_merge_distance = 50
|
||||
pad_wall_height = 0
|
||||
pad_wall_thickness = 1
|
||||
pad_wall_slope = 45
|
||||
faded_layers = 8
|
||||
slice_closing_radius = 0.005
|
||||
support_base_diameter = 3
|
||||
support_base_height = 1
|
||||
support_critical_angle = 45
|
||||
support_density_at_45 = 250
|
||||
support_density_at_horizontal = 500
|
||||
support_head_front_diameter = 0.4
|
||||
support_head_penetration = 0.4
|
||||
support_head_width = 3
|
||||
support_max_bridge_length = 10
|
||||
support_minimal_z = 0
|
||||
support_object_elevation = 5
|
||||
support_pillar_diameter = 1
|
||||
support_pillar_connection_mode = zigzag
|
||||
support_pillar_widening_factor = 0
|
||||
supports_enable = 1
|
||||
support_small_pillar_diameter_percent = 60%
|
||||
|
||||
[sla_print:0.05 Normal @ANYCUBIC ABSTRACT]
|
||||
inherits = *common print ANYCUBIC SLA*
|
||||
compatible_printers_condition = printer_notes=~/.*ABSTRACT_ONLY.*/
|
||||
layer_height = 0.05
|
||||
|
||||
[sla_print:0.05 Normal @ANYCUBIC MONO]
|
||||
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
|
||||
compatible_printers_condition = printer_notes=~/.*PHOTONMONO\n.*/
|
||||
output_filename_format = [input_filename_base].pwmo
|
||||
|
||||
[sla_print:0.05 Normal @ANYCUBIC MONO X]
|
||||
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
|
||||
compatible_printers_condition = printer_notes=~/.*PHOTONMONOX\n.*/
|
||||
output_filename_format = [input_filename_base].pwmx
|
||||
|
||||
[sla_print:0.05 Normal @ANYCUBIC MONO X 6K]
|
||||
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
|
||||
compatible_printers_condition = printer_notes=~/.*PHOTONMONOX6K\n.*/
|
||||
output_filename_format = [input_filename_base].pwmx
|
||||
|
||||
[sla_print:0.05 Normal @ANYCUBIC MONO SE]
|
||||
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
|
||||
compatible_printers_condition = printer_notes=~/.*PHOTONMONOSE\n.*/
|
||||
output_filename_format = [input_filename_base].pwms
|
||||
|
||||
|
||||
## SLA materials
|
||||
|
||||
#MONO series printer need a significantly reduced exposure time but are otherwise compatible
|
||||
[sla_material:*common ANYCUBIC SLA*]
|
||||
compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/
|
||||
compatible_prints_condition = layer_height == 0.05
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 40
|
||||
initial_layer_height = 0.05
|
||||
material_correction = 1,1,1
|
||||
material_notes = #Distances are defined in mm, speeds are defined in mm/s.\n#Delay is defined in s.\nLIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5\nANTIALIASING=1
|
||||
|
||||
[sla_material:*common 0.05 ANYCUBIC SLA*]
|
||||
inherits = *common ANYCUBIC SLA*
|
||||
|
||||
[sla_material:Generic Blue Resin @MONO 0.05]
|
||||
inherits = *common 0.05 ANYCUBIC SLA*
|
||||
exposure_time = 2.5
|
||||
initial_exposure_time = 40
|
||||
material_type = Tough
|
||||
material_vendor = Generic
|
||||
material_colour = #6080EC
|
||||
compatible_printers_condition = printer_notes=~/.*MONO.*/ and printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/
|
||||
|
||||
[sla_material:Anycubic Plant-based UV Resin Grey 23 @MONO 0.05]
|
||||
inherits = *common 0.05 ANYCUBIC SLA*
|
||||
exposure_time = 2.3
|
||||
initial_exposure_time = 23
|
||||
material_type = Plant-Based
|
||||
material_vendor = Anycubic
|
||||
material_colour = #808080
|
||||
compatible_printers_condition = printer_model=="PHOTON MONO X 6K"
|
||||
material_notes = LIFT_SPEED=2
|
||||
|
||||
[sla_material:Anycubic Plant-based UV Resin Grey 28 @MONO 0.05]
|
||||
inherits = *common 0.05 ANYCUBIC SLA*
|
||||
exposure_time = 2
|
||||
initial_exposure_time = 28
|
||||
material_type = Plant-Based
|
||||
material_vendor = Anycubic
|
||||
material_colour = #808080
|
||||
compatible_printers_condition = printer_model=="PHOTON MONO X"
|
||||
material_notes = LIFT_SPEED=2
|
||||
|
||||
[sla_material:Anycubic Plant-based UV Resin Grey 30 @MONO 0.05]
|
||||
inherits = *common 0.05 ANYCUBIC SLA*
|
||||
exposure_time = 2
|
||||
initial_exposure_time = 30
|
||||
material_type = Plant-Based
|
||||
material_vendor = Anycubic
|
||||
material_colour = #808080
|
||||
compatible_printers_condition = printer_model=="PHOTON MONO SE"
|
||||
material_notes = LIFT_SPEED=2
|
||||
|
||||
## Printers
|
||||
|
||||
[printer:Anycubic Photon Mono]
|
||||
printer_technology = SLA
|
||||
printer_model = PHOTON MONO
|
||||
printer_variant = default
|
||||
default_sla_material_profile = Generic Blue Resin @MONO 0.05
|
||||
default_sla_print_profile = 0.05 Normal @ANYCUBIC
|
||||
thumbnails = 224x168
|
||||
sla_archive_format = pwmo
|
||||
bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
|
||||
display_orientation = landscape
|
||||
display_mirror_x = 1
|
||||
display_mirror_y = 0
|
||||
display_pixels_x = 1620
|
||||
display_pixels_y = 2560
|
||||
display_width = 82.62
|
||||
display_height = 130.56
|
||||
max_print_height = 165
|
||||
elefant_foot_compensation = 0.2
|
||||
elefant_foot_min_width = 0.2
|
||||
min_exposure_time = 0.8
|
||||
max_exposure_time = 120
|
||||
min_initial_exposure_time = 0.8
|
||||
max_initial_exposure_time = 300
|
||||
printer_correction = 1,1,1
|
||||
gamma_correction = 1
|
||||
area_fill = 50
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONO\nPRINTER_TECHNOLOGY_SLA\n
|
||||
|
||||
[printer:Anycubic Photon Mono SE]
|
||||
printer_technology = SLA
|
||||
printer_model = PHOTON MONO SE
|
||||
printer_variant = default
|
||||
default_sla_material_profile = Generic Blue Resin @MONO 0.05
|
||||
default_sla_print_profile = 0.05 Normal @ANYCUBIC
|
||||
thumbnails = 224x168
|
||||
sla_archive_format = pwms
|
||||
bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
|
||||
display_orientation = landscape
|
||||
display_mirror_x = 1
|
||||
display_mirror_y = 0
|
||||
display_pixels_x = 1620
|
||||
display_pixels_y = 2560
|
||||
display_width = 82.62
|
||||
display_height = 130.56
|
||||
max_print_height = 160
|
||||
elefant_foot_compensation = 0.2
|
||||
elefant_foot_min_width = 0.2
|
||||
min_exposure_time = 0.8
|
||||
max_exposure_time = 120
|
||||
min_initial_exposure_time = 0.8
|
||||
max_initial_exposure_time = 300
|
||||
printer_correction = 1,1,1
|
||||
gamma_correction = 1
|
||||
area_fill = 45
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOSE\nPRINTER_TECHNOLOGY_SLA\n
|
||||
|
||||
[printer:Anycubic Photon Mono X]
|
||||
printer_technology = SLA
|
||||
printer_model = PHOTON MONO X
|
||||
printer_variant = default
|
||||
default_sla_material_profile = Generic Blue Resin @MONO 0.05
|
||||
default_sla_print_profile = 0.05 Normal @ANYCUBIC
|
||||
thumbnails = 224x168
|
||||
sla_archive_format = pwmx
|
||||
bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02
|
||||
display_height = 120
|
||||
display_orientation = landscape
|
||||
display_mirror_x = 1
|
||||
display_mirror_y = 0
|
||||
display_pixels_x = 3840
|
||||
display_pixels_y = 2400
|
||||
display_width = 192
|
||||
max_print_height = 245
|
||||
elefant_foot_compensation = 0.2
|
||||
elefant_foot_min_width = 0.2
|
||||
min_exposure_time = 1
|
||||
max_exposure_time = 120
|
||||
min_initial_exposure_time = 1
|
||||
max_initial_exposure_time = 300
|
||||
printer_correction = 1,1,1
|
||||
gamma_correction = 1
|
||||
area_fill = 45
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\nPRINTER_TECHNOLOGY_SLA\n
|
||||
|
||||
[printer:Anycubic Photon Mono X 6K]
|
||||
printer_technology = SLA
|
||||
printer_model = PHOTON MONO X 6K
|
||||
printer_variant = default
|
||||
default_sla_material_profile = Anycubic Plant-based UV Resin Grey @MONO 0.05
|
||||
default_sla_print_profile = 0.05 Normal @ANYCUBIC
|
||||
thumbnails = 224x168
|
||||
sla_archive_format = pwmx
|
||||
bed_shape = 1.48x1.02,198.48x1.02,198.48x123.02,1.48x123.02
|
||||
display_height = 122
|
||||
display_orientation = landscape
|
||||
display_mirror_x = 1
|
||||
display_mirror_y = 0
|
||||
display_pixels_x = 5760
|
||||
display_pixels_y = 3600
|
||||
display_width = 197
|
||||
max_print_height = 245
|
||||
elefant_foot_compensation = 0.2
|
||||
elefant_foot_min_width = 0.2
|
||||
min_exposure_time = 1
|
||||
max_exposure_time = 120
|
||||
min_initial_exposure_time = 1
|
||||
max_initial_exposure_time = 300
|
||||
printer_correction = 1,1,1
|
||||
gamma_correction = 1
|
||||
area_fill = 45
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX6K\n
|
||||
|
||||
|
||||
@ -1,4 +1,8 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0
|
||||
0.0.9 Updated first layer height value.
|
||||
0.0.8 Support for the X3 and X4 series by porting settings from ArtillerySlicer V3.0.
|
||||
min_slic3r_version = 2.4.1-alpha0
|
||||
0.0.7 Added Eolas Prints filaments.
|
||||
|
||||
@ -13,9 +13,9 @@ repo_id = non-prusa-fff
|
||||
name = Artillery
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.8
|
||||
config_version = 1.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Artillery/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
@ -26,6 +26,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
|
||||
## PRINTER ##
|
||||
#############
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Artillery/
|
||||
[printer_model:X1]
|
||||
name = Artillery Sidewinder X1
|
||||
variants = 0.4
|
||||
@ -34,6 +35,7 @@ bed_model = bed-x1.stl
|
||||
bed_texture = bed-x1.png
|
||||
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
|
||||
|
||||
thumbnail = X1_thumbnail.png
|
||||
[printer_model:Genius]
|
||||
name = Artillery Genius
|
||||
variants = 0.4
|
||||
@ -42,6 +44,7 @@ bed_model = bed-genius.stl
|
||||
bed_texture = bed-genius.png
|
||||
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
|
||||
|
||||
thumbnail = Genius_thumbnail.png
|
||||
[printer_model:Hornet]
|
||||
name = Artillery Hornet
|
||||
variants = 0.4
|
||||
@ -50,6 +53,7 @@ bed_model = bed-hornet.stl
|
||||
bed_texture = bed-hornet.png
|
||||
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
|
||||
|
||||
thumbnail = Hornet_thumbnail.png
|
||||
[printer_model:X3 Plus]
|
||||
name = Artillery Sidewinder X3 Plus
|
||||
variants = 0.4
|
||||
@ -58,6 +62,7 @@ bed_model = bed-x3-plus.stl
|
||||
bed_texture = bed-x1.png
|
||||
default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
|
||||
|
||||
thumbnail = X3 Plus_thumbnail.png
|
||||
[printer_model:X3 Pro]
|
||||
name = Artillery Sidewinder X3 Pro
|
||||
variants = 0.4
|
||||
@ -66,6 +71,7 @@ bed_model = bed-x3-pro.stl
|
||||
bed_texture = bed-x1.png
|
||||
default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
|
||||
|
||||
thumbnail = X3 Pro_thumbnail.png
|
||||
[printer_model:X4 Plus]
|
||||
name = Artillery Sidewinder X4 Plus
|
||||
variants = 0.4
|
||||
@ -74,6 +80,7 @@ bed_model = bed-x4-plus.stl
|
||||
bed_texture = bed-x1.png
|
||||
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
|
||||
|
||||
thumbnail = X4 Plus_thumbnail.png
|
||||
[printer_model:X4 Pro]
|
||||
name = Artillery Sidewinder X4 Pro
|
||||
variants = 0.4
|
||||
@ -82,6 +89,7 @@ bed_model = bed-x4-pro.stl
|
||||
bed_texture = bed-x1.png
|
||||
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
|
||||
|
||||
thumbnail = X4 Pro_thumbnail.png
|
||||
[printer_model:X4 Max]
|
||||
name = Artillery Sidewinder X4 Max
|
||||
variants = 0.4
|
||||
@ -91,6 +99,7 @@ bed_texture = bed-x1.png
|
||||
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
|
||||
|
||||
# Common printer preset
|
||||
thumbnail = X4 Max_thumbnail.png
|
||||
[printer:*common*]
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
|
||||
between_objects_gcode =
|
||||
@ -402,7 +411,7 @@ fill_angle = 45
|
||||
fill_density = 15%
|
||||
first_layer_acceleration = 500
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 150%
|
||||
first_layer_height = 0.25
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 30
|
||||
gcode_comments = 1
|
||||
@ -1236,4 +1245,4 @@ filament_retract_length = 1.5
|
||||
filament_type = TPU
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 215
|
||||
temperature = 215
|
||||
temperature = 215
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.4.1-beta3
|
||||
0.0.7 Correct missing profile improvement from 0.0.6 to set ensure_vertical_shell_thickness = 0 (off).
|
||||
0.0.6 Correct start gcode, match profile and firmware settings, and other profile improvements.
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
0.1.0 Initial version
|
||||
|
||||
@ -5,13 +5,14 @@
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
name = BIQU
|
||||
config_version = 0.1.0
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIQU/
|
||||
config_version = 1.0.0
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIQU/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIQU/
|
||||
[printer_model:BIQUBX]
|
||||
name = BIQU BX
|
||||
variants = 0.4
|
||||
@ -24,6 +25,7 @@ default_materials = Generic PLA @BIQU; Generic PETG @BIQU; Generic ABS @BIQU
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
thumbnail = BIQUBX_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
|
||||
@ -1,4 +1,10 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
min_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha2
|
||||
1.0.5 Hotfix for 2.7.2 color change, as well as ramping prime line to reduce initial blob
|
||||
1.0.4 Added proper pause and core change GCode that seems somewhat reliable.
|
||||
1.0.3 Swap purge direction for 1.6 nozzle to reduce dwelling time.
|
||||
1.0.2 Removed invalid compatible_print condition.
|
||||
1.0.1 Swapped Pause GCode, Fixed Chocolate Colors, Resolved Output Format issue from Inheriting Keyword Typo
|
||||
1.0.0 Initial
|
||||
|
||||
@ -6,9 +6,9 @@ repo_id = non-prusa-fff
|
||||
name = Cocoa Press
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.0.2
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/CocoaPress/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/CocoaPress/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
@ -18,6 +18,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/CocoaPress/
|
||||
[printer_model:Cocoa_Press]
|
||||
name = Cocoa Press
|
||||
variants = 0.8; 1.6
|
||||
@ -30,7 +31,7 @@ thumbnail = CocoaPress_MiniChef.png
|
||||
[print:*common*]
|
||||
gcode_label_objects = 1
|
||||
gcode_resolution = 0.0125
|
||||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";$1$2M0;r;"Pause command allows you to get a full screen message."
|
||||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
|
||||
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
|
||||
|
||||
@ -56,7 +57,7 @@ default_acceleration = 1500
|
||||
dont_support_bridges = 1
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0
|
||||
enable_dynamic_overhang_speeds = 0
|
||||
enable_dynamic_overhang_speeds = 1
|
||||
external_perimeter_acceleration = 0
|
||||
external_perimeter_extrusion_width = 0
|
||||
external_perimeter_speed = 25
|
||||
@ -107,7 +108,7 @@ min_skirt_length = 0
|
||||
mmu_segmented_region_max_width = 0
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
overhang_speed_0 = 15
|
||||
overhang_speed_0 = 12
|
||||
overhang_speed_1 = 15
|
||||
overhang_speed_2 = 20
|
||||
overhang_speed_3 = 25
|
||||
@ -227,7 +228,7 @@ default_acceleration = 1500
|
||||
dont_support_bridges = 1
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0
|
||||
enable_dynamic_overhang_speeds = 0
|
||||
enable_dynamic_overhang_speeds = 1
|
||||
external_perimeter_acceleration = 0
|
||||
external_perimeter_extrusion_width = 0
|
||||
external_perimeter_speed = 25
|
||||
@ -278,7 +279,7 @@ min_skirt_length = 0
|
||||
mmu_segmented_region_max_width = 0
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
overhang_speed_0 = 15
|
||||
overhang_speed_0 = 12
|
||||
overhang_speed_1 = 15
|
||||
overhang_speed_2 = 20
|
||||
overhang_speed_3 = 25
|
||||
@ -448,11 +449,11 @@ autoemit_temperature_commands = 0
|
||||
bed_shape = 0x0,140x0,140x150,0x150
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
|
||||
between_objects_gcode =
|
||||
color_change_gcode = ;G1 E-.05 F900\n;G1 X2.5 Y2.5 F4500 ;Move to the side\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\nM25 load new chocolate ;pause for user\n;G1 E.06 F900\n;G1 X2.6 Y2.6 F4500
|
||||
color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\n; restore position\nG61; \n\n;AFTER_COLOR_CHANGE
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
deretract_speed = 15
|
||||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y145\nM84
|
||||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #FFE3CA
|
||||
extruder_offset = 0x0
|
||||
@ -482,7 +483,7 @@ max_print_height = 150
|
||||
min_layer_height = 0.2
|
||||
nozzle_diameter = 0.8
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = ; end pause print
|
||||
pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box. As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message. Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
|
||||
print_host =
|
||||
printer_settings_id = cocoa_press_minichef_settings_0_8
|
||||
printer_technology = FFF
|
||||
@ -503,7 +504,7 @@ retract_restart_extra_toolchange = 0
|
||||
retract_speed = 15
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28 ; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing + loading mesh\nG29 O V4 ; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y148\nG1 Z.5\nG1 E1.25 F450\nG1 X8.25 Y148 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y145 F900\nG1 X131.25 Y145 E.10538\nG1 X141.75 Y145
|
||||
start_gcode = M220 S100; set speed to 100%\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing + loading mesh\nG29 O V4 ; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y148 Z3.2\nG1 X128.625 Y148 Z.5 E.15\nG1 X8.25 Y148 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y145 F900\nG1 X131.25 Y145 E.10538\nG1 X141.75 Y145
|
||||
template_custom_gcode =
|
||||
thumbnails = 64x64,400x300
|
||||
thumbnails_format = PNG
|
||||
@ -521,12 +522,12 @@ autoemit_temperature_commands = 0
|
||||
bed_shape = 0x0,140x0,140x150,0x150
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
|
||||
between_objects_gcode =
|
||||
color_change_gcode = ;G1 E-.05 F900\n;G1 X2.5 Y2.5 F4500 ;Move to the side\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\nM25 load new chocolate ;pause for user\n;G1 E.06 F900\n;G1 X2.6 Y2.6 F4500
|
||||
color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\nG61; restore start position\n;AFTER_COLOR_CHANGE
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_print_profile = 1.0
|
||||
deretract_speed = 15
|
||||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y145\nM84
|
||||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #FFE3CA
|
||||
extruder_offset = 0x0
|
||||
@ -556,7 +557,7 @@ max_print_height = 150
|
||||
min_layer_height = 0.2
|
||||
nozzle_diameter = 1.6
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = ; end pause gcode
|
||||
pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box. As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message. Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
|
||||
print_host =
|
||||
printer_settings_id = cocoa_press_minichef_settings_1_6
|
||||
printer_technology = FFF
|
||||
@ -577,7 +578,7 @@ retract_restart_extra_toolchange = 0
|
||||
retract_speed = 15
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28 ; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing loading mesh\nG29 O V4; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line\n\nG1 X5.8 Y 145\nG1 Z1 ; small z-hop to avoid potentially big purge getting caught.\nG1 E1.25 F450\nG1 X134.2 Y145 E.44109 F900
|
||||
start_gcode = M220 S100; set speed to 100%\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing loading mesh\nG29 O V4; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line\n\nG1 X145 Y 145\nG1 Z1 ; small z-hop to avoid potentially big purge getting caught.\nG1 E1.25 F450\nG1 X5 Y145 E.33109 F900
|
||||
template_custom_gcode =
|
||||
thumbnails = 64x64,400x300
|
||||
thumbnails_format = PNG
|
||||
@ -600,4 +601,4 @@ printer_model = Cocoa_Press
|
||||
[printer:*common*]
|
||||
default_filament_profile = "Cocoa Press Chocolates"
|
||||
printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
|
||||
gcode_flavor = marlin2
|
||||
gcode_flavor = marlin2
|
||||
@ -1,3 +1,8 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.7.0
|
||||
0.3.0 Finetune Ironing, Add Idle Temperatures in start_code's, Add PolyMaker PolyTerra PLA, Fix Ender-5 (Pro) Bed Size.
|
||||
min_slic3r_version = 2.6.0-alpha0
|
||||
0.2.7 Added Eolas Prints filaments.
|
||||
0.2.6 Add Ender-5 Pro, Ender-5 S1, Sermoon-V1, Sermoon-V1 Pro. Unlock HIGHSPEED/SUPERSPEED presets for Ender-5 S1/Ender-6/Ender-7.
|
||||
|
||||
@ -6,15 +6,16 @@ repo_id = non-prusa-fff
|
||||
name = Creality
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.2.7
|
||||
config_version = 1.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Creality/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Creality/
|
||||
[printer_model:ENDER3]
|
||||
name = Creality Ender-3
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -24,6 +25,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3_thumbnail.png
|
||||
[printer_model:ENDER3BLTOUCH]
|
||||
name = Creality Ender-3 BLTouch
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -33,6 +35,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3BLTOUCH_thumbnail.png
|
||||
[printer_model:ENDER3PRO]
|
||||
name = Creality Ender-3 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -42,6 +45,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3PRO_thumbnail.png
|
||||
[printer_model:ENDER3NEO]
|
||||
name = Creality Ender-3 Neo
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -51,6 +55,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3NEO_thumbnail.png
|
||||
[printer_model:ENDER3V2]
|
||||
name = Creality Ender-3 V2
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -60,6 +65,7 @@ bed_model = ender3v2_bed.stl
|
||||
bed_texture = ender3v2.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3V2_thumbnail.png
|
||||
[printer_model:ENDER3V2NEO]
|
||||
name = Creality Ender-3 V2 Neo
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -69,6 +75,7 @@ bed_model = ender3v2_bed.stl
|
||||
bed_texture = ender3v2.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3V2NEO_thumbnail.png
|
||||
[printer_model:ENDER3S1]
|
||||
name = Creality Ender-3 S1
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -78,6 +85,7 @@ bed_model = ender3v2_bed.stl
|
||||
bed_texture = ender3v2.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3S1_thumbnail.png
|
||||
[printer_model:ENDER3S1PRO]
|
||||
name = Creality Ender-3 S1 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -87,6 +95,7 @@ bed_model = ender3v2_bed.stl
|
||||
bed_texture = ender3v2.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3S1PRO_thumbnail.png
|
||||
[printer_model:ENDER3S1PLUS]
|
||||
name = Creality Ender-3 S1 Plus
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -96,6 +105,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10spro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3S1PLUS_thumbnail.png
|
||||
[printer_model:ENDER3MAX]
|
||||
name = Creality Ender-3 Max
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -105,6 +115,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10spro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3MAX_thumbnail.png
|
||||
[printer_model:ENDER3MAXNEO]
|
||||
name = Creality Ender-3 Max Neo
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -114,6 +125,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10spro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER3MAXNEO_thumbnail.png
|
||||
[printer_model:ENDER4]
|
||||
name = Creality Ender-4
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -123,6 +135,7 @@ bed_model = ender3v2_bed.stl
|
||||
bed_texture = ender3v2.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER4_thumbnail.png
|
||||
[printer_model:ENDER5]
|
||||
name = Creality Ender-5
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -132,6 +145,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER5_thumbnail.png
|
||||
[printer_model:ENDER5PRO]
|
||||
name = Creality Ender-5 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -141,6 +155,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER5PRO_thumbnail.png
|
||||
[printer_model:ENDER5PLUS]
|
||||
name = Creality Ender-5 Plus
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -150,6 +165,7 @@ bed_model = ender5plus_bed.stl
|
||||
bed_texture = ender5plus.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER5PLUS_thumbnail.png
|
||||
[printer_model:ENDER5S1]
|
||||
name = Creality Ender-5 S1
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -159,6 +175,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = ender3.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER5S1_thumbnail.png
|
||||
[printer_model:ENDER6]
|
||||
name = Creality Ender-6
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -168,6 +185,7 @@ bed_model = ender6_bed.stl
|
||||
bed_texture = ender6.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER6_thumbnail.png
|
||||
[printer_model:ENDER7]
|
||||
name = Creality Ender-7
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -177,6 +195,7 @@ bed_model = ender7_bed.stl
|
||||
bed_texture = ender7.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER7_thumbnail.png
|
||||
[printer_model:ENDER2]
|
||||
name = Creality Ender-2
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -186,6 +205,7 @@ bed_model = ender2_bed.stl
|
||||
bed_texture = ender2.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER2_thumbnail.png
|
||||
[printer_model:ENDER2PRO]
|
||||
name = Creality Ender-2 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -195,6 +215,7 @@ bed_model = ender2pro_bed.stl
|
||||
bed_texture = ender2pro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = ENDER2PRO_thumbnail.png
|
||||
[printer_model:CR5PRO]
|
||||
name = Creality CR-5 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -204,6 +225,7 @@ bed_model = cr5pro_bed.stl
|
||||
bed_texture = cr5pro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR5PRO_thumbnail.png
|
||||
[printer_model:CR5PROH]
|
||||
name = Creality CR-5 Pro H
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -213,6 +235,7 @@ bed_model = cr5pro_bed.stl
|
||||
bed_texture = cr5pro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR5PROH_thumbnail.png
|
||||
[printer_model:CR6SE]
|
||||
name = Creality CR-6 SE
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -222,6 +245,7 @@ bed_model = cr6se_bed.stl
|
||||
bed_texture = cr6se.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR6SE_thumbnail.png
|
||||
[printer_model:CR6MAX]
|
||||
name = Creality CR-6 Max
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -231,6 +255,7 @@ bed_model = cr10s4_bed.stl
|
||||
bed_texture = cr10s4.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR6MAX_thumbnail.png
|
||||
[printer_model:CR10SMART]
|
||||
name = Creality CR-10 SMART
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -240,6 +265,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10spro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10SMART_thumbnail.png
|
||||
[printer_model:CR10SMARTPRO]
|
||||
name = Creality CR-10 SMART Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -249,6 +275,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10spro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10SMARTPRO_thumbnail.png
|
||||
[printer_model:CR10MINI]
|
||||
name = Creality CR-10 Mini
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -258,6 +285,7 @@ bed_model = cr10mini_bed.stl
|
||||
bed_texture = cr10mini.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10MINI_thumbnail.png
|
||||
[printer_model:CR10MAX]
|
||||
name = Creality CR-10 Max
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -267,6 +295,7 @@ bed_model = cr10max_bed.stl
|
||||
bed_texture = cr10max.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10MAX_thumbnail.png
|
||||
[printer_model:CR10]
|
||||
name = Creality CR-10
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -276,6 +305,7 @@ bed_model = cr10_bed.stl
|
||||
bed_texture = cr10.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10_thumbnail.png
|
||||
[printer_model:CR10V2]
|
||||
name = Creality CR-10 V2
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -285,6 +315,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10V2_thumbnail.png
|
||||
[printer_model:CR10V3]
|
||||
name = Creality CR-10 V3
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -294,6 +325,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10V3_thumbnail.png
|
||||
[printer_model:CR10S]
|
||||
name = Creality CR-10 S
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -303,6 +335,7 @@ bed_model = cr10_bed.stl
|
||||
bed_texture = cr10.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10S_thumbnail.png
|
||||
[printer_model:CR10SPRO]
|
||||
name = Creality CR-10 S Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -312,6 +345,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10spro.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10SPRO_thumbnail.png
|
||||
[printer_model:CR10SPROV2]
|
||||
name = Creality CR-10 S Pro V2
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -321,6 +355,7 @@ bed_model = cr10v2_bed.stl
|
||||
bed_texture = cr10.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10SPROV2_thumbnail.png
|
||||
[printer_model:CR10S4]
|
||||
name = Creality CR-10 S4
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -330,6 +365,7 @@ bed_model = cr10s4_bed.stl
|
||||
bed_texture = cr10s4.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10S4_thumbnail.png
|
||||
[printer_model:CR10S5]
|
||||
name = Creality CR-10 S5
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -339,6 +375,7 @@ bed_model = cr10s5_bed.stl
|
||||
bed_texture = cr10s5.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR10S5_thumbnail.png
|
||||
[printer_model:CR20]
|
||||
name = Creality CR-20
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -348,6 +385,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = cr20.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR20_thumbnail.png
|
||||
[printer_model:CR20PRO]
|
||||
name = Creality CR-20 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -357,6 +395,7 @@ bed_model = ender3_bed.stl
|
||||
bed_texture = cr20.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR20PRO_thumbnail.png
|
||||
[printer_model:CR200B]
|
||||
name = Creality CR-200B
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -366,6 +405,7 @@ bed_model = cr200b_bed.stl
|
||||
bed_texture = cr200b.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR200B_thumbnail.png
|
||||
[printer_model:CR8]
|
||||
name = Creality CR-8
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -375,24 +415,7 @@ bed_model = cr8_bed.stl
|
||||
bed_texture = cr8.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
#[printer_model:CRX]
|
||||
#name = Creality CR-X
|
||||
#variants = 0.4; 0.3; 0.5; 0.6
|
||||
#technology = FFF
|
||||
#family = CR-X
|
||||
#bed_model = cr10v2_bed.stl
|
||||
#bed_texture = cr10spro.svg
|
||||
#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
#[printer_model:CRXPRO]
|
||||
#name = Creality CR-X Pro
|
||||
#variants = 0.4; 0.3; 0.5; 0.6
|
||||
#technology = FFF
|
||||
#family = CR-X
|
||||
#bed_model = cr10v2_bed.stl
|
||||
#bed_texture = cr10spro.svg
|
||||
#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
thumbnail = CR8_thumbnail.png
|
||||
[printer_model:SERMOOND1]
|
||||
name = Creality Sermoon-D1
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -402,8 +425,7 @@ bed_model = sermoond1_bed.stl
|
||||
bed_texture = sermoond1.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
|
||||
|
||||
thumbnail = SERMOOND1_thumbnail.png
|
||||
[printer_model:SERMOONV1]
|
||||
name = Creality Sermoon-V1
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -413,8 +435,7 @@ bed_model = sermoonv1_bed.stl
|
||||
bed_texture = sermoonv1.svg
|
||||
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
|
||||
|
||||
|
||||
|
||||
thumbnail = SERMOONV1_thumbnail.png
|
||||
[printer_model:SERMOONV1PRO]
|
||||
name = Creality Sermoon-V1 Pro
|
||||
variants = 0.4; 0.3; 0.5; 0.6
|
||||
@ -430,6 +451,7 @@ default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
thumbnail = SERMOONV1PRO_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_acceleration = 250
|
||||
@ -465,6 +487,10 @@ infill_only_where_needed = 0
|
||||
infill_overlap = 23%
|
||||
infill_speed = 50
|
||||
interface_shells = 0
|
||||
ironing_flowrate = 10%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 20
|
||||
ironing_type = top
|
||||
max_print_speed = 100
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
@ -532,7 +558,7 @@ top_solid_infill_speed = 30
|
||||
support_material_speed = 40
|
||||
support_material_interface_speed = 100%
|
||||
bridge_speed = 25
|
||||
ironing_speed = 15
|
||||
ironing_speed = 20
|
||||
travel_speed = 150
|
||||
travel_speed_z = 0
|
||||
first_layer_speed = 20
|
||||
@ -1128,6 +1154,7 @@ min_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 1
|
||||
temperature = 205
|
||||
idle_temperature = 150
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
@ -1147,6 +1174,7 @@ max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 100
|
||||
temperature = 240
|
||||
idle_temperature = 160
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
@ -1167,6 +1195,7 @@ min_fan_speed = 0
|
||||
bridge_fan_speed = 30
|
||||
top_fan_speed = 0
|
||||
temperature = 245
|
||||
idle_temperature = 180
|
||||
|
||||
[filament:*TPU*]
|
||||
inherits = *common*
|
||||
@ -1187,6 +1216,7 @@ min_fan_speed = 0
|
||||
bridge_fan_speed = 30
|
||||
top_fan_speed = 0
|
||||
temperature = 245
|
||||
idle_temperature = 130
|
||||
|
||||
[filament:Generic PLA @CREALITY]
|
||||
inherits = *PLA*
|
||||
@ -1456,6 +1486,18 @@ filament_density = 1.37
|
||||
filament_colour = #FF4640
|
||||
filament_spool_weight = 180
|
||||
|
||||
[filament:Polymaker PolyTerra PLA @CREALITY]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Polymaker
|
||||
temperature = 205
|
||||
bed_temperature = 45
|
||||
first_layer_temperature = 205
|
||||
first_layer_bed_temperature = 45
|
||||
filament_cost = 20.99
|
||||
filament_density = 1.31
|
||||
filament_colour = #42B3C0
|
||||
filament_spool_weight = 140
|
||||
|
||||
[filament:VOXELPLA PLA Plus @CREALITY]
|
||||
inherits = *PLA*
|
||||
filament_vendor = VOXELPLA
|
||||
@ -1626,7 +1668,7 @@ wipe = 1
|
||||
z_offset = 0
|
||||
printer_model =
|
||||
default_filament_profile = "Generic PLA @CREALITY"
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
|
||||
|
||||
# Intended for printers that have exclusively shipped with a 32bit mainboard
|
||||
@ -1635,19 +1677,19 @@ gcode_flavor = marlin2
|
||||
|
||||
# Intended for printers equipped with a strain gauge mechanism, like the CR-6 series
|
||||
[printer:*straingauge*]
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM109 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
|
||||
# Intended for printers with a smaller bed, like the Ender-3 series
|
||||
[printer:*fastabl*]
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
|
||||
# Intended for printers with a larger bed, like the CR-10 series
|
||||
[printer:*slowabl*]
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
|
||||
# intended for printers that have RESTORE_LEVELING_AFTER_G28 enabled in firmware
|
||||
[printer:*storedabl*]
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||
|
||||
# Intended for printers with vendor official firmware verified to support M25
|
||||
[printer:*pauseprint*]
|
||||
@ -1993,7 +2035,7 @@ inherits = *ENDER4*; *0.6nozzle*
|
||||
|
||||
[printer:*ENDER5*]
|
||||
inherits = *common*; *bowdenlong*; *descendingz*
|
||||
bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
|
||||
bed_shape = 5x0,215x0,215x220,5x220
|
||||
max_print_height = 300
|
||||
printer_model = ENDER5
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
|
||||
@ -2017,7 +2059,7 @@ inherits = *ENDER5*; *0.6nozzle*
|
||||
|
||||
[printer:*ENDER5PRO*]
|
||||
inherits = *common*; *bowdencapricorn*; *descendingz*
|
||||
bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
|
||||
bed_shape = 5x0,215x0,215x220,5x220
|
||||
max_print_height = 300
|
||||
printer_model = ENDER5PRO
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PRO\nPRINTER_HAS_BOWDEN
|
||||
@ -2667,4 +2709,4 @@ inherits = *SERMOONV1PRO*; *0.4nozzle*
|
||||
inherits = *SERMOONV1PRO*; *0.5nozzle*
|
||||
|
||||
[printer:Creality Sermoon-V1 Pro (0.6 mm nozzle)]
|
||||
inherits = *SERMOONV1PRO*; *0.6nozzle*
|
||||
inherits = *SERMOONV1PRO*; *0.6nozzle*
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha1
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
1.0.3 Added Eolas Prints filaments.
|
||||
1.0.2 Added new printer models.
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,2 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.2 Updated start g-code for QQ Pro.
|
||||
0.0.1 Initial Version
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
0.1.0 Initial Geeetech bundle
|
||||
|
||||
|
||||
@ -8,14 +8,15 @@ repo_id = non-prusa-fff
|
||||
name = Geeetech
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.1.0
|
||||
config_version = 1.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Geeetech/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Geeetech/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Geeetech/
|
||||
[printer_model:Thunder]
|
||||
name = Geeetech Thunder
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -25,6 +26,7 @@ bed_model = 250x250.stl
|
||||
bed_texture = 250x250.svg
|
||||
default_materials = Thunder HS-PLA @Geeetech; Thunder PLA @Geeetech; Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = Thunder_thumbnail.png
|
||||
[printer_model:ThunderPro]
|
||||
name = Geeetech Thunder Pro
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -34,6 +36,7 @@ bed_model = 250x250.stl
|
||||
bed_texture = 250x250.svg
|
||||
default_materials = Thunder HS-PLA @Geeetech; Thunder PLA @Geeetech; Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = ThunderPro_thumbnail.png
|
||||
[printer_model:MizarS]
|
||||
name = Geeetech Mizar S
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -43,6 +46,7 @@ bed_model = 255x255.stl
|
||||
bed_texture = 255x255.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MizarS_thumbnail.png
|
||||
[printer_model:MizarPro]
|
||||
name = Geeetech Mizar Pro
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -52,6 +56,7 @@ bed_model = 220x220.stl
|
||||
bed_texture = 220x220.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MizarPro_thumbnail.png
|
||||
[printer_model:Mizar]
|
||||
name = Geeetech Mizar
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -61,6 +66,7 @@ bed_model = 220x220.stl
|
||||
bed_texture = 220x220.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = Mizar_thumbnail.png
|
||||
[printer_model:MizarMax]
|
||||
name = Geeetech Mizar Max
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -70,6 +76,7 @@ bed_model = 320x320.stl
|
||||
bed_texture = 320x320.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MizarMax_thumbnail.png
|
||||
[printer_model:MizarM]
|
||||
name = Geeetech Mizar M
|
||||
variants = 0.4
|
||||
@ -88,6 +95,7 @@ default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @
|
||||
#bed_texture = 255x255.svg
|
||||
#default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MizarM_thumbnail.png
|
||||
[printer_model:A10Pro]
|
||||
name = Geeetech A10 Pro
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -97,6 +105,7 @@ bed_model = 220x220.stl
|
||||
bed_texture = 220x220.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A10Pro_thumbnail.png
|
||||
[printer_model:A10M]
|
||||
name = Geeetech A10 M
|
||||
variants = 0.4
|
||||
@ -106,6 +115,7 @@ bed_model = 220x220.stl
|
||||
bed_texture = 220x220.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A10M_thumbnail.png
|
||||
[printer_model:A10T]
|
||||
name = Geeetech A10 T
|
||||
variants = 0.4
|
||||
@ -115,6 +125,7 @@ bed_model = 220x220.stl
|
||||
bed_texture = 220x220.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A10T_thumbnail.png
|
||||
[printer_model:A20]
|
||||
name = Geeetech A20
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -124,6 +135,7 @@ bed_model = 250x250.stl
|
||||
bed_texture = 250x250.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A20_thumbnail.png
|
||||
[printer_model:A20M]
|
||||
name = Geeetech A20 M
|
||||
variants = 0.4
|
||||
@ -133,6 +145,7 @@ bed_model = 250x250.stl
|
||||
bed_texture = 250x250.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A20M_thumbnail.png
|
||||
[printer_model:A20T]
|
||||
name = Geeetech A20 T
|
||||
variants = 0.4
|
||||
@ -142,6 +155,7 @@ bed_model = 250x250.stl
|
||||
bed_texture = 250x250.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A20T_thumbnail.png
|
||||
[printer_model:A30Pro]
|
||||
name = Geeetech A30 Pro
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -151,6 +165,7 @@ bed_model = 320x320.stl
|
||||
bed_texture = 320x320.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A30Pro_thumbnail.png
|
||||
[printer_model:A30M]
|
||||
name = Geeetech A30 M
|
||||
variants = 0.4
|
||||
@ -160,6 +175,7 @@ bed_model = 320x320.stl
|
||||
bed_texture = 320x320.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A30M_thumbnail.png
|
||||
[printer_model:A30T]
|
||||
name = Geeetech A30 T
|
||||
variants = 0.4
|
||||
@ -169,6 +185,7 @@ bed_model = 320x320.stl
|
||||
bed_texture = 320x320.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = A30T_thumbnail.png
|
||||
[printer_model:E180]
|
||||
name = Geeetech E180
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -178,6 +195,7 @@ bed_model = 125X130.stl
|
||||
bed_texture = 125X130.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = E180_thumbnail.png
|
||||
[printer_model:MeDucer]
|
||||
name = Geeetech Me Ducer
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -187,6 +205,7 @@ bed_model = 180X150.stl
|
||||
bed_texture = 180X150.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MeDucer_thumbnail.png
|
||||
[printer_model:MeCreator]
|
||||
name = Geeetech Me Creator
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -196,6 +215,7 @@ bed_model = 150x150.stl
|
||||
bed_texture = 150x150.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MeCreator_thumbnail.png
|
||||
[printer_model:MeCreator2]
|
||||
name = Geeetech Me Creator2
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -205,6 +225,7 @@ bed_model = 160x160.stl
|
||||
bed_texture = 160x160.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = MeCreator2_thumbnail.png
|
||||
[printer_model:GiantArmD200]
|
||||
name = Geeetech GiantArmD200
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -214,6 +235,7 @@ bed_model = 300x180.stl
|
||||
bed_texture = 300x180.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = GiantArmD200_thumbnail.png
|
||||
[printer_model:I3ProB]
|
||||
name = Geeetech I3 ProB
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -223,6 +245,7 @@ bed_model = 200x200.stl
|
||||
bed_texture = 200x200.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = I3ProB_thumbnail.png
|
||||
[printer_model:I3ProW]
|
||||
name = Geeetech I3 ProW
|
||||
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
|
||||
@ -232,6 +255,7 @@ bed_model = 200x200.stl
|
||||
bed_texture = 200x200.svg
|
||||
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
|
||||
|
||||
thumbnail = I3ProW_thumbnail.png
|
||||
[printer_model:I3ProC]
|
||||
name = Geeetech I3 ProC
|
||||
variants = 0.4
|
||||
@ -247,6 +271,7 @@ default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @
|
||||
####### Start ###print presets ########
|
||||
#########################################
|
||||
|
||||
thumbnail = I3ProC_thumbnail.png
|
||||
[print:*common*]
|
||||
# Print presets for common printers
|
||||
avoid_crossing_perimeters = 0
|
||||
|
||||
@ -1,6 +1,9 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.5.0-alpha0
|
||||
0.0.4 Improve Proton X profiles, Add Proton XE-750 printer
|
||||
min_slic3r_version = 2.4.1
|
||||
min_slic3r_version = 2.3.1-beta
|
||||
0.0.3 Set default filament profile.
|
||||
0.0.2 Improved start gcode, changed filename format
|
||||
0.0.1 Initial version
|
||||
|
||||
@ -4,13 +4,14 @@
|
||||
repo_id = non-prusa-fff
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = INAT
|
||||
config_version = 0.0.4
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/INAT/
|
||||
config_version = 1.0.0
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/INAT/
|
||||
|
||||
###
|
||||
### PRINTER LIST
|
||||
###
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/INAT/
|
||||
[printer_model:PROTON_X_RAIL]
|
||||
name = INAT Proton X Rail
|
||||
variants = 0.4
|
||||
@ -18,6 +19,7 @@ technology = FFF
|
||||
family = Proton
|
||||
default_materials = PLA @PROTON_X
|
||||
|
||||
thumbnail = PROTON_X_RAIL_thumbnail.png
|
||||
[printer_model:PROTON_X_ROD]
|
||||
name = INAT Proton X Rod
|
||||
variants = 0.4
|
||||
@ -25,6 +27,7 @@ technology = FFF
|
||||
family = Proton
|
||||
default_materials = PLA @PROTON_X
|
||||
|
||||
thumbnail = PROTON_X_ROD_thumbnail.png
|
||||
[printer_model:PROTON_XE750]
|
||||
name = INAT Proton XE-750
|
||||
variants = 0.4
|
||||
@ -37,6 +40,7 @@ default_materials = PLA @PROTON_XE750
|
||||
### COMMON QUALITY DEFINITIONS
|
||||
###
|
||||
|
||||
thumbnail = PROTON_XE750_thumbnail.png
|
||||
[print:*common*]
|
||||
#layers
|
||||
layer_height = 0.2
|
||||
@ -728,4 +732,4 @@ inherits =*common Polymaker PolyMide PA6-GF @INAT*; *start_end_gcode @PROTON_XE7
|
||||
inherits =*common Devil Design PETG @INAT*; *start_end_gcode @PROTON_XE750*
|
||||
|
||||
[filament:Filament PM PETG FRJet @PROTON_XE750]
|
||||
inherits =*common Filament PM PETG FRJet @INAT*; *start_end_gcode @PROTON_XE750*
|
||||
inherits =*common Filament PM PETG FRJet @INAT*; *start_end_gcode @PROTON_XE750*
|
||||
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.5.0-alpha0
|
||||
1.0.0 Initial Infinity3D bundle
|
||||
|
||||
@ -6,11 +6,12 @@ repo_id = non-prusa-fff
|
||||
name = Infinity3D
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 1.0.0
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Infinity3D/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Infinity3D/
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Infinity3D/
|
||||
[printer_model:DEV-200]
|
||||
name = Infinity3D DEV-200
|
||||
variants = 0.4
|
||||
@ -19,6 +20,7 @@ bed_model = DEV_200_bed.stl
|
||||
bed_texture = DEV_200_texture.svg
|
||||
default_materials = Generic PLA @Infinity3D; Generic PETG @Infinity3D
|
||||
|
||||
thumbnail = DEV-200_thumbnail.png
|
||||
[printer_model:DEV-350]
|
||||
name = Infinity3D DEV-350
|
||||
variants = 0.4
|
||||
@ -27,6 +29,7 @@ bed_model = DEV_350_bed.stl
|
||||
bed_texture = DEV_350_texture.svg
|
||||
default_materials = Generic PLA @Infinity3D; Generic PETG @Infinity3D
|
||||
|
||||
thumbnail = DEV-350_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
@ -810,4 +813,4 @@ max_print_height = 235
|
||||
start_gcode = Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start Warming Bed\nM104 S[first_layer_temperature] ;Preheat\nG28 ;home\nG29 ;Auto Bed-level\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000 ;Move to corner\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0 ;Zero set extruder position\nG1 E3 F200 ;Feed filament to clear nozzle\nG92 E0 ;Zero set extruder position
|
||||
end_gcode = ;End GCode begin\nM140 S0 ;Heated bed heater off\nM104 S0 ;Extruder heater off\nG90 ;absolute positioning\nG92 E0 ;Retract the filament\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z240 E-1 F3000 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y200 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;stepper off\nM107 ; fan off\nM82 ; absolute extrusion\n;End GCode end
|
||||
default_filament_profile = Generic PLA @Infinity3D
|
||||
default_print_profile = 0.20mm GOOD @Infinity3D_DEV_200
|
||||
default_print_profile = 0.20mm GOOD @Infinity3D_DEV_200
|
||||
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.4.1-alpha
|
||||
1.0.0 Initial Jubilee bundle
|
||||
|
||||
@ -8,11 +8,12 @@ repo_id = non-prusa-fff
|
||||
name = Jubilee
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 1.0.0
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Jubilee/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Jubilee/
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Jubilee/
|
||||
[printer_model:Jubilee]
|
||||
name = Jubilee
|
||||
variants = 0.4; Volcano 0.4
|
||||
@ -21,6 +22,7 @@ bed_model = Jubilee_bed.stl
|
||||
bed_texture = Jubilee_texture.svg
|
||||
default_materials = Generic PLA @Jubilee; Generic PETG @Jubilee
|
||||
|
||||
thumbnail = Jubilee_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
@ -514,4 +516,4 @@ inherits = *common*
|
||||
printer_model = Jubilee
|
||||
printer_variant = Volcano 0.4
|
||||
printer_notes = Volcano
|
||||
default_print_profile = 0.2mm Volcano, aesthetic @Jubilee
|
||||
default_print_profile = 0.2mm Volcano, aesthetic @Jubilee
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0
|
||||
0.0.4 Updated Start G-Codes.
|
||||
0.0.3 Added new printer profile.
|
||||
|
||||
@ -11,10 +11,10 @@ name = LNL3D
|
||||
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.4
|
||||
config_version = 1.0.0
|
||||
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LNL3D/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LNL3D/
|
||||
|
||||
########################################
|
||||
########## Printer models ##########
|
||||
@ -24,6 +24,7 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LNL3D/
|
||||
[printer_model:LNL3D_D3]
|
||||
name = LNL3D D3
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -33,6 +34,7 @@ bed_model = LNL3D_D3_bed.stl
|
||||
bed_texture = LNL3D_D3_texture.svg
|
||||
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
|
||||
|
||||
thumbnail = LNL3D_D3_thumbnail.png
|
||||
[printer_model:LNL3D_D3_VULCAN]
|
||||
name = LNL3D D3 Vulcan
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -42,6 +44,7 @@ bed_model = LNL3D_D3_VULCAN_bed.stl
|
||||
bed_texture = LNL3D_D3_VULCAN_texture.svg
|
||||
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
|
||||
|
||||
thumbnail = LNL3D_D3_VULCAN_thumbnail.png
|
||||
[printer_model:LNL3D_D3_V2]
|
||||
name = LNL3D D3 V2
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -51,6 +54,7 @@ bed_model = LNL3D_D3_V2_bed.stl
|
||||
bed_texture = LNL3D_D3_V2_texture.svg
|
||||
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
|
||||
|
||||
thumbnail = LNL3D_D3_V2_thumbnail.png
|
||||
[printer_model:LNL3D_D5]
|
||||
name = LNL3D D5
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -60,6 +64,7 @@ bed_model = LNL3D_D5_bed.stl
|
||||
bed_texture = LNL3D_D5_texture.svg
|
||||
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
|
||||
|
||||
thumbnail = LNL3D_D5_thumbnail.png
|
||||
[printer_model:LNL3D_D6]
|
||||
name = LNL3D D6
|
||||
variants = 0.4; 0.2; 0.6; 0.8
|
||||
@ -77,6 +82,7 @@ default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print presets
|
||||
thumbnail = LNL3D_D6_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_acceleration = 250
|
||||
@ -1033,4 +1039,4 @@ inherits = *LNL3D_D6*; *0.4nozzle*
|
||||
inherits = *LNL3D_D6*; *0.6nozzle*
|
||||
|
||||
[printer:LNL3D D6 (0.8 mm nozzle)]
|
||||
inherits = *LNL3D_D6*; *0.8nozzle*
|
||||
inherits = *LNL3D_D6*; *0.8nozzle*
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.1.0 General rework. Added new print and filament profiles.
|
||||
0.0.2 Removed obsolete host keys
|
||||
|
||||
@ -5,9 +5,10 @@
|
||||
repo_id = non-prusa-fff
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = LulzBot
|
||||
config_version = 0.1.0
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
|
||||
config_version = 1.0.0
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LulzBot/
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LulzBot/
|
||||
[printer_model:MINI_AERO]
|
||||
name = Mini Aero
|
||||
variants = 0.5
|
||||
@ -16,6 +17,7 @@ technology = FFF
|
||||
#bed_texture = mini.svg
|
||||
default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
|
||||
|
||||
thumbnail = MINI_AERO_thumbnail.png
|
||||
[printer_model:TAZ6_AERO]
|
||||
name = Taz6 Aero
|
||||
variants = 0.5
|
||||
@ -28,6 +30,7 @@ default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lul
|
||||
# technology = FFF
|
||||
# default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
|
||||
|
||||
thumbnail = TAZ6_AERO_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
@ -421,4 +424,4 @@ z_offset = 0
|
||||
# use_volumetric_e = 0
|
||||
# variable_layer_height = 1
|
||||
# wipe = 1
|
||||
# z_offset = 0
|
||||
# z_offset = 0
|
||||
@ -1,2 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
0.1.1 Adjusted M2, M2Dual and M3 starting scripts
|
||||
0.1.0 Initial version
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0
|
||||
min_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
0.1.0 Initial version
|
||||
@ -2,11 +2,12 @@
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
name = Papapiu
|
||||
config_version = 0.1.0
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PapapiuLab/
|
||||
config_version = 1.0.0
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/PapapiuLab/
|
||||
|
||||
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/PapapiuLab/
|
||||
[printer_model:Papapiu_N1S]
|
||||
name = Papapiu N1S
|
||||
variants = 0.4
|
||||
|
||||
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
1.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha1
|
||||
0.0.1 Initial version
|
||||
@ -7,15 +7,16 @@ repo_id = non-prusa-fff
|
||||
name = Print4Taste
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.1
|
||||
config_version = 1.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Print4Taste/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Print4Taste/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Print4Taste/
|
||||
[printer_model:MC2.0]
|
||||
name = mycusini 2.0
|
||||
variants = 1.0
|
||||
@ -25,6 +26,7 @@ bed_model = MC2.0_bed.stl
|
||||
bed_texture = MC2.0_texture.svg
|
||||
default_materials = mycusini 3D Choco @MC2.0
|
||||
|
||||
thumbnail = MC2.0_thumbnail.png
|
||||
[print:*common_MC2.0*]
|
||||
bottom_solid_layers = 2
|
||||
bridge_speed = 30
|
||||
|
||||
@ -1,3 +1,7 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.1 RatRig official update, V-Core 4 added, PunkFil filament line
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.7.0
|
||||
1.0.3 Updated flavor. Updated start g-code.
|
||||
min_slic3r_version = 2.4.1-alpha0
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
min_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha5
|
||||
1.0.1 General rework. Fix start gcodes.
|
||||
min_slic3r_version = 2.6.0-alpha0
|
||||
|
||||
@ -6,15 +6,16 @@ repo_id = non-prusa-fff
|
||||
name = Rigid3D
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.0.1
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Rigid3D/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Rigid3D/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Rigid3D/
|
||||
[printer_model:Zero2]
|
||||
name = Rigid3D Zero2
|
||||
variants = 0.4
|
||||
@ -24,6 +25,7 @@ bed_model = zero_bed.stl
|
||||
bed_texture = zero2_bed.png
|
||||
default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
|
||||
|
||||
thumbnail = Zero2_thumbnail.png
|
||||
[printer_model:Zero3]
|
||||
name = Rigid3D Zero3
|
||||
variants = 0.4
|
||||
@ -33,6 +35,7 @@ bed_model = zero_bed.stl
|
||||
bed_texture = zero3_bed.png
|
||||
default_materials =Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
|
||||
|
||||
thumbnail = Zero3_thumbnail.png
|
||||
[printer_model:Mucit]
|
||||
name = Rigid3D Mucit
|
||||
variants = 0.4
|
||||
@ -42,6 +45,7 @@ bed_model = mucit_bed.stl
|
||||
bed_texture = mucit_bed.png
|
||||
default_materials = Generic PLA @Rigid3D; Rigid3D PLA @Rigid3D
|
||||
|
||||
thumbnail = Mucit_thumbnail.png
|
||||
[printer_model:Mucit2]
|
||||
name = Rigid3D Mucit2
|
||||
variants = 0.4
|
||||
@ -55,6 +59,7 @@ default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Ri
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
thumbnail = Mucit2_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
@ -467,4 +472,4 @@ max_print_height = 150
|
||||
printer_model = Mucit2
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT2\nPRINTER_HAS_HEATEDBED\n
|
||||
start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
|
||||
end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
|
||||
end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
|
||||
@ -1,4 +1,9 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.1 Add support BracingKit for Snapmaker 2. Add support Artisan.
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0
|
||||
1.1.2 Add support BracingKit for Snapmaker 2. Add support Artisan.
|
||||
1.1.1 Fixed overhang speeds. Fixed branch diameter angle for organic supports.
|
||||
1.1.0 Add more Snapmaker printers.
|
||||
min_slic3r_version = 2.4.1
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0
|
||||
1.0.0 Initial Sovol bundle
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha0
|
||||
1.0.5 Added Filament PM filaments. Added Prusament PETG V0.
|
||||
1.0.4 Updated compatible printer condition.
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,4 +1,11 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.5.2-alpha0
|
||||
1.0.5 Fixed chamber heating for AzteQ Industrial, Fixed material type for Polymaker PC, Fixed print area size
|
||||
1.0.4 Added new printer AzteQ Dynamic, Added AzteQ Dynamic material profiles for Prusament ASA, Prusa EasyABS, Prusament PLA, Prusament PETG, Smartfil PLA, Prusament PETG Carbon Fiber, Added AzteQ Industrial material profiles for Prusa EasyABS, Filament PM PAJet 160, Prusament PLA, Prusament PETG, Prusament PA11 Carbon Fiber, Smartfil PLA, Prusament PETG Carbon Fiber, Added DeltiQ 2 material profiles for Prusament PA11 Carbon Fiber, Prusament PC Blend Carbon Fiber, Prusament PETG, Fiberlogy Nylon PA12+CF15, Fiberlogy Nylon PA12+GF15, Prusament PVB, Prusament PC Blend Carbon Fiber 0.6 nozzle, Fiberlogy Nylon PA12+CF15 0.6 nozzle, Fiberlogy Nylon PA12+GF15 0.6 nozzle, Added FlexPrint 2 material profiles for Fiberlogy PP, NinjaTek TPU 75D, Changing the names of materials, Some minor print styles improvements
|
||||
min_slic3r_version = 2.5.0-alpha0
|
||||
1.0.3 Added DeltiQ 2 materials PETG (Prusa Polymers), PA11 Carbon Fiber (Prusa Polymers), PC Blend Carbon Fiber (Prusa Polymers), Improved DeltiQ 2 material PLA Prusament, Improved output filename template(added filament used weight, fixed timestamp, fixed invalid printhead code)
|
||||
1.0.2 Added home to start gcode before heating bed, added DeltiQ 2 material PLA Prusament, fixed gcode for pause print, improved output filename template(added printhead code, added filament used length, truncated timestamp)
|
||||
min_slic3r_version = 2.4.1-rc1
|
||||
1.0.1 Fix missing AzteQ Industrial ABS material for 0.6, 0.8 nozzle, enabled elefant foot compensation
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,3 +1,7 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-beta2
|
||||
1.0.2 modification in start gcode and end gcode
|
||||
1.0.1 Speed profile has been added
|
||||
1.0.0 Initial version
|
||||
|
||||
@ -6,15 +6,16 @@ repo_id = non-prusa-fff
|
||||
name = Trimaker
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.0.1
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Trimaker/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Trimaker/
|
||||
# changelog_url =
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Trimaker/
|
||||
[printer_model:Trimaker Nebula Cloud]
|
||||
name = Trimaker Nebula Cloud
|
||||
family = Nebula
|
||||
@ -351,8 +352,8 @@ retract_speed = 35
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 F3000 X0.5 Y0.5\nG1 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
|
||||
end_gcode =;printing object ENDGCODE\n M107; Apagamos fan\n G90\n G92 E0\n G1 X0 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
|
||||
end_gcode =;printing object ENDGCODE\n M107; Apagamos fan\n G90\n G92 E0\n G1 X200 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
@ -372,7 +373,7 @@ printer_model = Trimaker Nebula Cloud
|
||||
inherits = *common*
|
||||
bed_shape = 0x0,230x0,230x230,0x230
|
||||
max_print_height = 260
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 F3000 X0.5 Y0.5\nG1 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
|
||||
printer_model = Trimaker Nebula
|
||||
|
||||
[printer:*Trimaker Cosmos II*]
|
||||
|
||||
@ -1,3 +1,8 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0
|
||||
1.1.0 Refactored code to have remove duplicate values and match some updated Cura values. Adds Ultimaker 2 DXUv2 mod. Adds Ultimaker S-line printers (S3, S5, S7)
|
||||
min_slic3r_version = 2.4.0-beta0
|
||||
1.0.2 Fixed start g-code.
|
||||
1.0.1 Updated start g-code.
|
||||
|
||||
@ -1,401 +1,432 @@
|
||||
# Print profiles for the Ultimaker printers.
|
||||
# https://github.com/prusa3d/PrusaSlicer-settings/issues/143
|
||||
# author: https://github.com/foreachthing
|
||||
|
||||
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = Ultimaker
|
||||
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.0.2
|
||||
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:ULTIMAKER2]
|
||||
name = Ultimaker 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
bed_model = ultimaker2_bed.stl
|
||||
bed_texture = ultimaker2.svg
|
||||
default_materials = Generic PLA @ULTIMAKER2; Generic PETG @ULTIMAKER2; Generic ABS @ULTIMAKER2
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 60
|
||||
brim_separation = 0
|
||||
brim_type = outer_only
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 0
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 75%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 50
|
||||
extruder_clearance_radius = 60
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_acceleration_over_raft = 0
|
||||
first_layer_extrusion_width = 0.45
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 30
|
||||
first_layer_speed_over_raft = 30
|
||||
fuzzy_skin = none
|
||||
fuzzy_skin_point_dist = 0.8
|
||||
fuzzy_skin_thickness = 0.3
|
||||
gap_fill_enabled = 1
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 1
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.5
|
||||
infill_first = 1
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 35%
|
||||
infill_speed = 60
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
layer_height = 0.2
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 2
|
||||
mmu_segmented_region_max_width = 0
|
||||
notes = Ultimaker 2, 0.4 mm Nozzle
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 50
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_contact_distance = 0.1
|
||||
raft_expansion = 1.5
|
||||
raft_first_layer_density = 90%
|
||||
raft_first_layer_expansion = 3
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
slicing_mode = regular
|
||||
small_perimeter_speed = 75%
|
||||
solid_infill_below_area = 10
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 40
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 45
|
||||
support_material_auto = 1
|
||||
support_material_bottom_contact_distance = 0
|
||||
support_material_bottom_interface_layers = -1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_closing_radius = 2
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.4
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_pattern = auto
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 4
|
||||
support_material_speed = 60
|
||||
support_material_style = grid
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 0.8
|
||||
thick_bridges = 1
|
||||
thin_walls = 0
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 120
|
||||
travel_speed_z = 0
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_brim_width = 2
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
|
||||
[print:*0.12mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.12
|
||||
perimeters = 3
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.20
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:*0.25mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.25
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.12mm DETAIL @ULTIMAKER2]
|
||||
inherits = *0.12mm*
|
||||
travel_speed = 150
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.20mm NORMAL @ULTIMAKER2]
|
||||
inherits = *0.20mm*
|
||||
travel_speed = 150
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.25mm DRAFT @ULTIMAKER2]
|
||||
inherits = *0.25mm*
|
||||
travel_speed = 150
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
extrusion_multiplier = 1
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 2.85
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ULTIMAKER.*/
|
||||
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
bed_temperature = 60
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FFF0E0
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 205
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
min_fan_speed = 100
|
||||
max_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
temperature = 210
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #FFF0E0
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = PETG
|
||||
filament_density = 1.27
|
||||
first_layer_bed_temperature = 85
|
||||
bed_temperature = 85
|
||||
first_layer_temperature = 240
|
||||
temperature = 235
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
min_fan_speed = 20
|
||||
max_fan_speed = 40
|
||||
bridge_fan_speed = 40
|
||||
slowdown_below_layer_time = 15
|
||||
min_print_speed = 10
|
||||
disable_fan_first_layers = 3
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #FFF0E0
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = ABS
|
||||
filament_density = 1.10
|
||||
first_layer_bed_temperature = 80
|
||||
bed_temperature = 80
|
||||
first_layer_temperature = 240
|
||||
temperature = 235
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
min_fan_speed = 5
|
||||
max_fan_speed = 5
|
||||
bridge_fan_speed = 10
|
||||
slowdown_below_layer_time = 15
|
||||
min_print_speed = 10
|
||||
disable_fan_first_layers = 3
|
||||
|
||||
[filament:Generic PLA @ULTIMAKER2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
filament_cost =
|
||||
|
||||
[filament:Generic Black PLA @ULTIMAKER2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
filament_colour = #0E3F3F
|
||||
filament_cost =
|
||||
|
||||
[filament:Generic PETG @ULTIMAKER2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
filament_cost =
|
||||
|
||||
[filament:Generic ABS @ULTIMAKER2]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Generic
|
||||
filament_cost =
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;layer:[layer_num];\nM117 Layer [layer_num];\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
extruder_colour = #FFF0E0
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = reprap
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1500
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 3000
|
||||
machine_max_acceleration_y = 3000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 20
|
||||
machine_max_jerk_y = 20
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode =
|
||||
max_print_height = 212
|
||||
octoprint_apikey =
|
||||
octoprint_host =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
retract_before_travel = 5
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 6
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 50
|
||||
serial_port =
|
||||
single_extruder_multi_material = 0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
||||
[printer:Ultimaker 2]
|
||||
inherits = *common*
|
||||
printer_model = ULTIMAKER2
|
||||
bed_shape = 0x0,224x0,224x225,0x225
|
||||
printer_variant = 0.4
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.08
|
||||
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKER2
|
||||
nozzle_diameter = 0.4
|
||||
default_print_profile = 0.20mm NORMAL @ULTIMAKER2
|
||||
default_filament_profile = Generic PLA @ULTIMAKER2
|
||||
start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\nM140 S[first_layer_bed_temperature] ; start bed heating\n\nG28 X0 Y0 Z0 ; move X/Y/Z to endstops\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature] ; continue bed heating\nM109 S[first_layer_temperature] ; wait for nozzle temperature\n\n; Purge and prime\nM83 ; set extruder to relative mode\nG92 E0 ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000 \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50 ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000 ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600 ; drag filament to decompress bowden tube\nG1 X100 F3200 ; wipe backwards a bit\nG1 X150 F3200 ; back to where there is no plastic: avoid dragging\nG92 E0 ; reset extruder reference\nM82 ; set extruder to absolute mode\n\n; # # # # # # END Header
|
||||
end_gcode = ; # # # # # # START Footer\nG91 ; relative coordinates\n;G1 E-1 F1200 ; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000 ; move Z a bit\n; G1 X-10 Y-10 F6000 ; move XY a bit\nG1 E-5.5 F300 ; retract the filament\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nM104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nM84 ; disable motors\n; # # # # # # END Footer\n
|
||||
# Print profiles for the Ultimaker printers.
|
||||
# https://github.com/prusa3d/PrusaSlicer-settings/issues/143
|
||||
# author: https://github.com/foreachthing
|
||||
# author: https://github.com/ansonl
|
||||
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = Ultimaker
|
||||
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 2.0.0
|
||||
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Ultimaker/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Ultimaker/
|
||||
[printer_model:ULTIMAKER2]
|
||||
name = Ultimaker 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
bed_model = ultimaker2_bed.stl
|
||||
bed_texture = ultimaker2.svg
|
||||
thumbnail = ULTIMAKER2_thumbnail_v2.png
|
||||
default_materials = Generic PLA; Generic PETG @ULTIMAKER; Generic ABS @ULTIMAKER
|
||||
|
||||
[printer_model:ULTIMAKERSline]
|
||||
name = Ultimaker S-line
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
bed_texture = ultimaker2.svg
|
||||
default_materials = Generic PLA
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
thumbnail = ULTIMAKERSline_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 35
|
||||
brim_separation = 0
|
||||
brim_type = outer_only
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 0
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0.08
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.4
|
||||
external_perimeter_speed = 50%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 50
|
||||
extruder_clearance_radius = 60
|
||||
extrusion_width = 0.4
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_acceleration_over_raft = 0
|
||||
first_layer_extrusion_width = 0.4
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 25%
|
||||
first_layer_speed_over_raft = 25%
|
||||
fuzzy_skin = none
|
||||
fuzzy_skin_point_dist = 0.8
|
||||
fuzzy_skin_thickness = 0.3
|
||||
gap_fill_enabled = 1
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 1
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.4
|
||||
infill_first = 1
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 35%
|
||||
infill_speed = 70
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 2
|
||||
mmu_segmented_region_max_width = 0
|
||||
notes = Ultimaker, 0.4 mm Nozzle
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 1
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.4
|
||||
perimeter_speed = 50
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_contact_distance = 0.1
|
||||
raft_expansion = 1.5
|
||||
raft_first_layer_density = 90%
|
||||
raft_first_layer_expansion = 3
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
slicing_mode = regular
|
||||
small_perimeter_speed = 75%
|
||||
solid_infill_below_area = 10
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.4
|
||||
solid_infill_speed = 75%
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -30
|
||||
support_material = 0
|
||||
support_material_angle = 45
|
||||
support_material_auto = 1
|
||||
support_material_bottom_contact_distance = 0
|
||||
support_material_bottom_interface_layers = -1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_closing_radius = 2
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.4
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_pattern = auto
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 4
|
||||
support_material_speed = 60
|
||||
support_material_style = grid
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 0.8
|
||||
thick_bridges = 1
|
||||
thin_walls = 0
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50%
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 150
|
||||
travel_speed_z = 0
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_brim_width = 2
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.10
|
||||
bottom_solid_layers = 8
|
||||
top_solid_layers = 8
|
||||
|
||||
[print:*0.12mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.12
|
||||
perimeters = 3
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.20
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:*0.25mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.25
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.10mm FINE @ULTIMAKER]
|
||||
inherits = *0.10mm*
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.12mm DETAIL @ULTIMAKER]
|
||||
inherits = *0.12mm*
|
||||
support_material_extrusion_width = 0.38
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.20mm NORMAL @ULTIMAKER]
|
||||
inherits = *0.20mm*
|
||||
support_material_extrusion_width = 0.38
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.25mm DRAFT @ULTIMAKER]
|
||||
inherits = *0.25mm*
|
||||
support_material_extrusion_width = 0.38
|
||||
compatible_printers_condition = printer_model=="ULTIMAKER2" or printer_model=="ULTIMAKERSline" and nozzle_diameter[0]==0.4
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
extrusion_multiplier = 1
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 2.85
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 5
|
||||
slowdown_below_layer_time = 6
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ULTIMAKER.*/
|
||||
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
bed_temperature = 60
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #C0C0C0
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 205
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
min_fan_speed = 100
|
||||
max_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
temperature = 210
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #C0C0C0
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = PETG
|
||||
filament_density = 1.27
|
||||
first_layer_bed_temperature = 85
|
||||
bed_temperature = 85
|
||||
first_layer_temperature = 240
|
||||
temperature = 235
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
min_fan_speed = 20
|
||||
max_fan_speed = 40
|
||||
bridge_fan_speed = 40
|
||||
slowdown_below_layer_time = 15
|
||||
min_print_speed = 10
|
||||
disable_fan_first_layers = 3
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #C0C0C0
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = ABS
|
||||
filament_density = 1.10
|
||||
first_layer_bed_temperature = 80
|
||||
bed_temperature = 80
|
||||
first_layer_temperature = 240
|
||||
temperature = 235
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
min_fan_speed = 5
|
||||
max_fan_speed = 5
|
||||
bridge_fan_speed = 10
|
||||
slowdown_below_layer_time = 15
|
||||
min_print_speed = 10
|
||||
disable_fan_first_layers = 3
|
||||
|
||||
[filament:Generic PLA @ULTIMAKER]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
filament_cost =
|
||||
|
||||
[filament:Generic PETG @ULTIMAKER]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
filament_cost =
|
||||
|
||||
[filament:Generic ABS @ULTIMAKER]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Generic
|
||||
filament_cost =
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;M117 Layer [layer_num];\n;LAYER:[layer_num]
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
extruder_colour = #F9A800;#00387B
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 3000
|
||||
machine_max_acceleration_retracting = 3000
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 300
|
||||
machine_max_feedrate_y = 300
|
||||
machine_max_feedrate_z = 40
|
||||
machine_max_jerk_e = 10
|
||||
machine_max_jerk_x = 20
|
||||
machine_max_jerk_y = 20
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode =
|
||||
octoprint_apikey =
|
||||
octoprint_host =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
retract_before_travel = 1.2,1.2
|
||||
retract_before_wipe = 0%,0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 6.5,6.5
|
||||
retract_length_toolchange = 16,16
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 25,25
|
||||
serial_port =
|
||||
single_extruder_multi_material = 0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 0
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
||||
[printer:Ultimaker 2]
|
||||
inherits = *common*
|
||||
printer_model = ULTIMAKER2
|
||||
bed_shape = 0x0,224x0,224x225,0x225
|
||||
max_print_height = 212
|
||||
printer_variant = 0.4
|
||||
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKER2
|
||||
nozzle_diameter = 0.4
|
||||
default_print_profile = 0.20mm NORMAL @ULTIMAKER
|
||||
default_filament_profile = Generic PLA @ULTIMAKER
|
||||
start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\nM140 S[first_layer_bed_temperature] ; start bed heating\n\nG28 X0 Y0 Z0 ; move X/Y/Z to endstops\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature] ; continue bed heating\nM109 S[first_layer_temperature] ; wait for nozzle temperature\n\n; Purge and prime\nM83 ; set extruder to relative mode\nG92 E0 ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000 \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50 ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000 ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600 ; drag filament to decompress bowden tube\nG1 X100 F3200 ; wipe backwards a bit\nG1 X150 F3200 ; back to where there is no plastic: avoid dragging\nG92 E0 ; reset extruder reference\nM82 ; set extruder to absolute mode\n\n; # # # # # # END Header
|
||||
end_gcode = ; # # # # # # START Footer\nG91 ; relative coordinates\n;G1 E-1 F1200 ; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000 ; move Z a bit\n; G1 X-10 Y-10 F6000 ; move XY a bit\nG1 E-5.5 F300 ; retract the filament\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nM104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nM84 ; disable motors\n; # # # # # # END Footer\n
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.06
|
||||
|
||||
[printer:Ultimaker 2 DXUv2]
|
||||
inherits = Ultimaker 2
|
||||
printer_model = ULTIMAKER2
|
||||
bed_shape = 0x0,224x0,224x225,0x225
|
||||
extruder_offset = 0x0,0x0 ; stock DXUv2 offset is X18 Y0 but this should be applied in firmware and PS does not provide option to turn off extruder offset correction so we leave it at 0 in slicer
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4,0.4
|
||||
gcode_flavor = marlin2
|
||||
default_print_profile = 0.20mm NORMAL @ULTIMAKER
|
||||
default_filament_profile = Generic PLA @ULTIMAKER
|
||||
toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}
|
||||
start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n; DXUv2 improved PS start priming Gcode for dual nozzles for multi-material print\nM355 S1 P25 ; Turn on case light dim\nM190 S[first_layer_bed_temperature]\nG28 ; Home all\n;M420 S1 ; Enable and load bed mesh\nG29 ; Run automatic bed leveling. Comment this line out if auto bed leveling is not desired.\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Preheat T0 to standby temp\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Preheat T1 to standby temp\nG21 ; Metric values\nG90 ; Absolute positioning\nM82 ; Set extruder to absolute mode\nM107 ; Start with the fan off\nM200 D0 T0 ; Reset filament diameter\nM200 D0 T1 ; Reset filament diameter\nG0 X200 F7200 ; Move to safe X and Y location from right side after ending ABL homing. Move X before Y to avoid hitting switching lever.\nG1 Y150 F7200\n; Prime routine for T1 in normally \nT1 ; move to the nozzle 2\nM104 T1 S{temperature[1]} ; Start heating up T1\nG0 Z10 F2400 ; move the platform down to 10mm\nM109 T1 S{temperature[1]} ; Heat up and wait for T1\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X50 Y1 F7200 ; Add HOTEND_OFFSET_Y index 1 to Y0 (or forward-most safe Y location when T1 is active) to get Gcode Y parameter\nG0 X95 Z0.3 F2400 ; lower nozzle\nG92 E0 ; reset E location\nG1 X225 Y1 Z0.3 E{retract_length_toolchange[1]} F1500 ; Add HOTEND_OFFSET_X index 1 to X217 (or right-most safe X location when T1 is active) to get actual Gcode X parameter.\nG3 X235 Y11 I0 J10 F7200\nG0 X235 Y11 Z0.3 F7200\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0\nG1 Y70 E3 F1000 ; intro line\nM104 T1 S{temperature[1] + standby_temperature_delta}\nG92 E0 \nG1 E-{retract_length_toolchange[1]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Prime routine for T0\nT0 ; move to the nozzle 1\nM104 T0 S{temperature[0]} ; Start heating up T0\nG0 Z10 F2400\nM109 T0 S{temperature[0]}\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X32 Y3 F7200\nG0 X77 Z0.3 F2400\nG92 E0 ; reset E location\nG1 X207 Y3 Z0.3 E{retract_length_toolchange[0]} F1500\nG3 X217 Y13 I0 J10 F7200\nG0 X217 Y13 Z0.3 F7200\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0 ; reset E location\nG1 Y72 E3 F1000 ; intro line\nM104 T0 S{temperature[0] + standby_temperature_delta}\nM104 T{initial_extruder} S{temperature[initial_extruder]} ; Start heating initial nozzle. Do not wait.\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Final prime and wipe sequence for initial extruder (usually T0)\nT{initial_extruder} ; move to the initial nozzle used for print\nM400 ;finish all moves\nG0 Z20 F2400\nG0 X212 F7200\nG0 Y70 F7200\nM109 T{initial_extruder} S{temperature[initial_extruder]} ; Wait for initial nozzle to reach temp\nG92 E0\nG1 E{retract_length_toolchange[initial_extruder]} F1200 ; prime by switching length\nG0 X217 Y50 Z0.5 F7200\nG92 E0\nG0 Y9.4 Z0.5 E3 F7200\nG2 X212 Y3.4 Z0.4 I-6 J0 F7200\nM104 T{initial_extruder} S{first_layer_temperature[initial_extruder]} ; Start heating to first layer temp\nG0 X207 Y3.4 Z0.4 F7200\nG2 X205 Y5.4 Z0.3 I0 J2 F7200\nG0 X205 Y5.4 Z0.3 F7200\nG1 Y10 F18000 ; break line\nG92 E0\nG1 Y50 E2 F1000 ; extrude line\nG92 E0\nG1 E-0.5 F1500 ; retract slightly\nG1 Y100 F18000 ; break line\nG92 E0\nM355 S1 P255; Turn on case light brighter\n;end of startup sequence
|
||||
end_gcode = ;End G-code\nG91 ;Relative movement\nG0 X-8.0 Y-8.0 Z3.5 E-4.5 F18000 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement\nM400 ;wait for all moves in planner to complete\nG90 ;absolute positioning\nM104 S0 T0 ;extruder heater off\nM104 S0 T1\nM140 S0 ;turn off bed\nT0 ; move to the first head\nG27; park toolhead\nM107 ;fan off\nM355 S0;turn off case light
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.06
|
||||
|
||||
[printer:*sline*]
|
||||
printer_model = ULTIMAKERSline
|
||||
extruder_offset = 0x0,22x0
|
||||
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKERSline
|
||||
toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nG91\nG0 Z2\nG90\nM82\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}\n\nG91\nG0 Z-2\nG90\nM82\nG92 E0 ; reset extrusion distance
|
||||
start_gcode = ; Delete the first 'generated by PrusaSlicer' line to make gcode printable on Ultimaker S-line\n\n;START_OF_HEADER\n; Printer_Settings_ID: [printer_settings_id]\n\n;ULTIMAKER GRIFFIN HEADER\n;HEADER_VERSION:0.1\n;FLAVOR:Griffin\n;GENERATOR.NAME:PrusaSlicer\n;GENERATOR.VERSION:5.4.0\n;GENERATOR.BUILD_DATE:{year}-{month}-{day}\n;TARGET_MACHINE.NAME:Ultimaker S7\n;EXTRUDER_TRAIN.0.INITIAL_TEMPERATURE:{first_layer_temperature[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.VOLUME_USED:{extruded_volume[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.0.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.0.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.INITIAL_TEMPERATURE:{temperature[1] + standby_temperature_delta}\n;EXTRUDER_TRAIN.1.MATERIAL.VOLUME_USED:{extruded_volume[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.1.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;BUILD_PLATE.INITIAL_TEMPERATURE:[first_layer_bed_temperature]\n;BUILD_VOLUME.TEMPERATURE:28\n;PRINT.TIME:0\n;PRINT.GROUPS:1\n;PRINT.SIZE.MIN.X:{print_bed_min[0]}\n;PRINT.SIZE.MIN.Y:{print_bed_min[1]}\n;PRINT.SIZE.MIN.Z:0\n;PRINT.SIZE.MAX.X:{print_bed_max[0]}\n;PRINT.SIZE.MAX.Y:{print_bed_max[1]}\n;PRINT.SIZE.MAX.Z:{max_print_height}\n;SLICE_UUID:32daaf1d-f868-4a8e-ad06-8536b153e789\n;END_OF_HEADER\nT0\nM82 ;absolute extrusion mode\n\nG21 ; metric values\nG90 ; absolute positioning\nM107 ; start with the fan off\n\nM140 S{first_layer_bed_temperature[initial_extruder]} ; start bed heating\n\nG28 ; home if supported\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; heat nozzle\n\nG280 S1 ; ultimaker home\n\n;To skip adaptive bed mesh probing uncomment G0 commands before ;LAYER:1\n;G0 X{print_bed_min[0]} Y{print_bed_max[1]}\n;G0 X{print_bed_min[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_max[1]}\n;LAYER:1\n\n; purge retract_length_toolchange due to unknown state\n; prime extruders next to each other to verify extruder offset calibration\n\n; prime T0\nM104 S{first_layer_temperature[0]} T0 ; start heat nozzle temperature\nT0\nM109 S{first_layer_temperature[0]} T0 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG92 E0\nG1 X5 Y10 E1.9 F1000\nG0 X5 Y1 Z0.3 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y1 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y1.5 F7200\nG92 E0\nG1 X10 Y1.5 E5.458 F1000\nG0 X10 Y1.9 F7200\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[1]} T1 ; start heat next nozzle temperature\nG92 E0\nG1 X{print_bed_max[0]-28} Y1.9 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 X{print_bed_max[0]-20} Y3 F18000\nG0 X{print_bed_max[0]-15} Y10 Z3 F2400\n\nG0 X30 Y10 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y110 E1.85 F1000\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; prime T1\nT1\nM109 S{first_layer_temperature[1]} T1 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG0 Y10 E1.9 F1000\nG0 Y2.5 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y2.5 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y2.9 F7200\nG92 E0\nG1 X10 Y2.9 E5.458 F1000\nG0 X10 Y3.3 F7200\nM104 S{temperature[1] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[initial_extruder]} ; start heating initial nozzle\nG92 E0\nG1 X{print_bed_max[0]-28} Y3.3 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200 ;retract just a little because we don't have a way to tell the slicer T1 filament position when it starts printing from E0\nG0 X{print_bed_max[0]-20} Y5 F18000\nG0 X{print_bed_max[0]-15} Y15 Z3 F2400\n\n;minus extruder1 offset X 22 which macro is not supported in start gcode\nG0 X{30+nozzle_diameter[1]-22} Y15 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y115 E1.85 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; switch to initial nozzle\nT{initial_extruder}\nM109 S{first_layer_temperature[initial_extruder]} ; wait for nozzle temperature\nG0 X{print_bed_max[0]-30} Y5 Z10 F7200\nG0 X25 Y10 Z5\nG0 X25 Y20 Z0.3\nM82 ;absolute extrusion mode\nG92 E0\nG1 Y30 E{retract_length_toolchange[initial_extruder]} F1200 ;prime to set filament location for prusaslicer generated initial retract\nG92 E0\n\n;END Start-gcode
|
||||
end_gcode = ;End-gcode\nM104 S0\nM104 S0 T0\nM104 S0 T1\nG0 X5 Y5 Z{max_print_height} F2000\nM140 S0\nM106 S0\nM84 ; disable motors\n
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.06
|
||||
|
||||
[printer:Ultimaker S3]
|
||||
inherits = *common*; *sline*
|
||||
printer_model = ULTIMAKERSline
|
||||
bed_shape = 0x0,230x0,230x190,0x190
|
||||
max_print_height = 200
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4,0.4
|
||||
default_print_profile = 0.20mm NORMAL @ULTIMAKER
|
||||
default_filament_profile = Generic PLA @ULTIMAKER
|
||||
|
||||
[printer:Ultimaker S5/S7]
|
||||
inherits = *common*; *sline*
|
||||
printer_model = ULTIMAKERSline
|
||||
bed_shape = 0x0,330x0,330x240,0x240
|
||||
max_print_height = 300
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4,0.4
|
||||
default_print_profile = 0.20mm NORMAL @ULTIMAKER
|
||||
default_filament_profile = Generic PLA @ULTIMAKER
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.6.0-alpha6
|
||||
1.0.4 Updated start g-code. Disabled autoemitting of temperature commands.
|
||||
1.0.3 Added Voron Switchwire.
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,2 +1,5 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.4.1
|
||||
1.0.0 Initial version
|
||||
|
||||
@ -8,14 +8,15 @@ repo_id = non-prusa-fff
|
||||
name = Zonestar
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.0.0
|
||||
config_version = 2.0.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Zonestar/
|
||||
config_update_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Zonestar/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Zonestar/
|
||||
[printer_model:Z5]
|
||||
name = Zonestar Z5
|
||||
variants = 0.4
|
||||
@ -24,6 +25,7 @@ bed_model = bed_220.stl
|
||||
bed_texture = 220_texture.svg
|
||||
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
|
||||
|
||||
thumbnail = Z5_thumbnail.png
|
||||
[printer_model:Z6]
|
||||
name = Zonestar Z6
|
||||
variants = 0.4
|
||||
@ -32,6 +34,7 @@ bed_model = bed_150.stl
|
||||
bed_texture = 150_texture.svg
|
||||
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
|
||||
|
||||
thumbnail = Z6_thumbnail.png
|
||||
[printer_model:Z5X]
|
||||
name = Zonestar Z5X
|
||||
variants = 0.4
|
||||
@ -40,6 +43,7 @@ bed_model = bed_310.stl
|
||||
bed_texture = 310_texture.svg
|
||||
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
|
||||
|
||||
thumbnail = Z5X_thumbnail.png
|
||||
[printer_model:Z8]
|
||||
name = Zonestar Z8
|
||||
variants = 0.4
|
||||
@ -48,6 +52,7 @@ bed_model = bed_310.stl
|
||||
bed_texture = 310_texture.svg
|
||||
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
|
||||
|
||||
thumbnail = Z8_thumbnail.png
|
||||
[printer_model:Z9]
|
||||
name = Zonestar Z9
|
||||
variants = 0.4
|
||||
@ -60,6 +65,7 @@ default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @
|
||||
#### print ####
|
||||
###################
|
||||
|
||||
thumbnail = Z9_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
@ -742,4 +748,4 @@ retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 0
|
||||
use_relative_e_distances = 0
|
||||
@ -1,3 +1,6 @@
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.4.0-alpha0
|
||||
1.0.1 Speed improvements, start gcode changes, added HIPS filament.
|
||||
1.0.0 Initial version
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Loading…
x
Reference in New Issue
Block a user