From a05a4f2a5d1f914c6a569d116ea13cab490b81cf Mon Sep 17 00:00:00 2001
From: YuSanka <yusanka@gmail.com>
Date: Wed, 20 Sep 2023 12:34:09 +0200
Subject: [PATCH] Localization: Updated POT

---
 resources/localization/PrusaSlicer.pot | 5280 +++++++++++++-----------
 1 file changed, 2974 insertions(+), 2306 deletions(-)

diff --git a/resources/localization/PrusaSlicer.pot b/resources/localization/PrusaSlicer.pot
index c66333cd46..d7826ce5bd 100644
--- a/resources/localization/PrusaSlicer.pot
+++ b/resources/localization/PrusaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-05 12:41+0200\n"
+"POT-Creation-Date: 2023-09-20 12:18+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -41,22 +41,22 @@ msgid "Internal infill"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:46 src/libslic3r/ExtrusionRole.cpp:71
-#: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:2488
-#: src/libslic3r/PrintConfig.cpp:2500
+#: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:2525
+#: src/libslic3r/PrintConfig.cpp:2537
 msgid "Solid infill"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:47 src/libslic3r/ExtrusionRole.cpp:73
-#: src/libslic3r/PrintConfig.cpp:1506 src/libslic3r/PrintConfig.cpp:3089
-#: src/libslic3r/PrintConfig.cpp:3102
+#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:3114
+#: src/libslic3r/PrintConfig.cpp:3127
 msgid "Top solid infill"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:48 src/libslic3r/ExtrusionRole.cpp:75
-#: src/libslic3r/PrintConfig.cpp:1683 src/libslic3r/PrintConfig.cpp:1689
-#: src/libslic3r/PrintConfig.cpp:1701 src/libslic3r/PrintConfig.cpp:1711
-#: src/libslic3r/PrintConfig.cpp:1719 src/libslic3r/PrintConfig.cpp:1721
-#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1491
+#: src/libslic3r/PrintConfig.cpp:1720 src/libslic3r/PrintConfig.cpp:1726
+#: src/libslic3r/PrintConfig.cpp:1738 src/libslic3r/PrintConfig.cpp:1748
+#: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1758
+#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1499
 msgid "Ironing"
 msgstr ""
 
@@ -65,7 +65,7 @@ msgid "Bridge infill"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:50 src/libslic3r/ExtrusionRole.cpp:79
-#: src/libslic3r/PrintConfig.cpp:1425
+#: src/libslic3r/PrintConfig.cpp:1456
 msgid "Gap fill"
 msgstr ""
 
@@ -74,37 +74,37 @@ msgid "Skirt/Brim"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:52 src/libslic3r/ExtrusionRole.cpp:83
-#: src/libslic3r/PrintConfig.cpp:792 src/libslic3r/PrintConfig.cpp:2189
-#: src/libslic3r/PrintConfig.cpp:2198 src/libslic3r/PrintConfig.cpp:2207
-#: src/libslic3r/PrintConfig.cpp:2217 src/libslic3r/PrintConfig.cpp:2226
-#: src/libslic3r/PrintConfig.cpp:2660 src/libslic3r/PrintConfig.cpp:2666
-#: src/libslic3r/PrintConfig.cpp:2674 src/libslic3r/PrintConfig.cpp:2687
-#: src/libslic3r/PrintConfig.cpp:2697 src/libslic3r/PrintConfig.cpp:2704
-#: src/libslic3r/PrintConfig.cpp:2720 src/libslic3r/PrintConfig.cpp:2736
-#: src/libslic3r/PrintConfig.cpp:2757 src/libslic3r/PrintConfig.cpp:2770
-#: src/libslic3r/PrintConfig.cpp:2786 src/libslic3r/PrintConfig.cpp:2801
-#: src/libslic3r/PrintConfig.cpp:2819 src/libslic3r/PrintConfig.cpp:2829
-#: src/libslic3r/PrintConfig.cpp:2838 src/libslic3r/PrintConfig.cpp:2849
-#: src/libslic3r/PrintConfig.cpp:2861 src/libslic3r/PrintConfig.cpp:2875
-#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2884
-#: src/libslic3r/PrintConfig.cpp:2893 src/libslic3r/PrintConfig.cpp:2907
-#: src/libslic3r/PrintConfig.cpp:2917 src/libslic3r/PrintConfig.cpp:2931
-#: src/libslic3r/PrintConfig.cpp:2939 src/libslic3r/PrintConfig.cpp:2951
-#: src/libslic3r/PrintConfig.cpp:2963 src/libslic3r/PrintConfig.cpp:2974
-#: src/libslic3r/PrintConfig.cpp:2987 src/libslic3r/PrintConfig.cpp:3000
-#: src/libslic3r/PrintConfig.cpp:3016 src/libslic3r/PrintConfig.cpp:3026
+#: src/libslic3r/PrintConfig.cpp:823 src/libslic3r/PrintConfig.cpp:2226
+#: src/libslic3r/PrintConfig.cpp:2235 src/libslic3r/PrintConfig.cpp:2244
+#: src/libslic3r/PrintConfig.cpp:2254 src/libslic3r/PrintConfig.cpp:2263
+#: src/libslic3r/PrintConfig.cpp:2697 src/libslic3r/PrintConfig.cpp:2703
+#: src/libslic3r/PrintConfig.cpp:2711 src/libslic3r/PrintConfig.cpp:2724
+#: src/libslic3r/PrintConfig.cpp:2734 src/libslic3r/PrintConfig.cpp:2741
+#: src/libslic3r/PrintConfig.cpp:2757 src/libslic3r/PrintConfig.cpp:2773
+#: src/libslic3r/PrintConfig.cpp:2794 src/libslic3r/PrintConfig.cpp:2807
+#: src/libslic3r/PrintConfig.cpp:2823 src/libslic3r/PrintConfig.cpp:2838
+#: src/libslic3r/PrintConfig.cpp:2856 src/libslic3r/PrintConfig.cpp:2866
+#: src/libslic3r/PrintConfig.cpp:2875 src/libslic3r/PrintConfig.cpp:2886
+#: src/libslic3r/PrintConfig.cpp:2898 src/libslic3r/PrintConfig.cpp:2912
+#: src/libslic3r/PrintConfig.cpp:2920 src/libslic3r/PrintConfig.cpp:2921
+#: src/libslic3r/PrintConfig.cpp:2930 src/libslic3r/PrintConfig.cpp:2944
+#: src/libslic3r/PrintConfig.cpp:2954 src/libslic3r/PrintConfig.cpp:2968
+#: src/libslic3r/PrintConfig.cpp:2976 src/libslic3r/PrintConfig.cpp:2988
+#: src/libslic3r/PrintConfig.cpp:3000 src/libslic3r/PrintConfig.cpp:3011
+#: src/libslic3r/PrintConfig.cpp:3024 src/libslic3r/PrintConfig.cpp:3037
+#: src/libslic3r/PrintConfig.cpp:3053 src/libslic3r/PrintConfig.cpp:3063
 #: src/slic3r/GUI/GUI_Factories.cpp:60 src/slic3r/GUI/GUI_Factories.cpp:135
-#: src/slic3r/GUI/Tab.cpp:1525 src/slic3r/GUI/Tab.cpp:1527
+#: src/slic3r/GUI/Tab.cpp:1533 src/slic3r/GUI/Tab.cpp:1535
 msgid "Support material"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:53 src/libslic3r/ExtrusionRole.cpp:85
-#: src/libslic3r/PrintConfig.cpp:2837
+#: src/libslic3r/PrintConfig.cpp:2874
 msgid "Support material interface"
 msgstr ""
 
 #: src/libslic3r/ExtrusionRole.cpp:54 src/libslic3r/ExtrusionRole.cpp:87
-#: src/slic3r/GUI/Tab.cpp:1631
+#: src/slic3r/GUI/Tab.cpp:1639
 msgid "Wipe tower"
 msgstr ""
 
@@ -113,7 +113,7 @@ msgstr ""
 msgid "Custom"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:81 src/slic3r/GUI/Tab.cpp:1513
+#: src/libslic3r/ExtrusionRole.cpp:81 src/slic3r/GUI/Tab.cpp:1521
 msgid "Skirt"
 msgstr ""
 
@@ -167,108 +167,108 @@ msgid ""
 "file.\n"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:627
+#: src/libslic3r/GCode.cpp:342
 msgid "There is an object with no extrusions in the first layer."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:628 src/libslic3r/PrintObjectSlice.cpp:740
+#: src/libslic3r/GCode.cpp:343 src/libslic3r/PrintObjectSlice.cpp:740
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:181
 msgid "Object name"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:658
+#: src/libslic3r/GCode.cpp:373
 #, possible-boost-format
 msgid "Empty layer between %1% and %2%."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:661
+#: src/libslic3r/GCode.cpp:376
 msgid "(Some lines not shown)"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:663
+#: src/libslic3r/GCode.cpp:378
 #, possible-boost-format
 msgid "Object name: %1%"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:664
+#: src/libslic3r/GCode.cpp:379
 msgid ""
 "Make sure the object is printable. This is usually caused by negligibly "
 "small extrusions or by a faulty model. Try to repair the model or change its "
 "orientation on the bed."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:795 src/libslic3r/PrintConfig.cpp:2563
-#: src/libslic3r/PrintConfig.cpp:2573 src/slic3r/GUI/Tab.cpp:2188
-#: src/slic3r/GUI/Tab.cpp:2646
+#: src/libslic3r/GCode.cpp:510 src/libslic3r/PrintConfig.cpp:2600
+#: src/libslic3r/PrintConfig.cpp:2610 src/slic3r/GUI/Tab.cpp:2263
+#: src/slic3r/GUI/Tab.cpp:2749
 msgid "Start G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:796 src/libslic3r/PrintConfig.cpp:807
-#: src/libslic3r/PrintConfig.cpp:817 src/slic3r/GUI/Tab.cpp:2198
-#: src/slic3r/GUI/Tab.cpp:2659
+#: src/libslic3r/GCode.cpp:511 src/libslic3r/PrintConfig.cpp:838
+#: src/libslic3r/PrintConfig.cpp:848 src/slic3r/GUI/Tab.cpp:2274
+#: src/slic3r/GUI/Tab.cpp:2763
 msgid "End G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:797 src/libslic3r/PrintConfig.cpp:463
-#: src/slic3r/GUI/Tab.cpp:2669
+#: src/libslic3r/GCode.cpp:512 src/libslic3r/PrintConfig.cpp:494
+#: src/slic3r/GUI/Tab.cpp:2774
 msgid "Before layer change G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:798 src/libslic3r/PrintConfig.cpp:1728
-#: src/slic3r/GUI/Tab.cpp:2679
+#: src/libslic3r/GCode.cpp:513 src/libslic3r/PrintConfig.cpp:1765
+#: src/slic3r/GUI/Tab.cpp:2785
 msgid "After layer change G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:799 src/libslic3r/PrintConfig.cpp:3077
-#: src/slic3r/GUI/Tab.cpp:2689
+#: src/libslic3r/GCode.cpp:514 src/libslic3r/PrintConfig.cpp:3102
+#: src/slic3r/GUI/Tab.cpp:2796
 msgid "Tool change G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:800 src/slic3r/GUI/Tab.cpp:2699
+#: src/libslic3r/GCode.cpp:515 src/slic3r/GUI/Tab.cpp:2807
 msgid "Between objects G-code (for sequential printing)"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:801 src/slic3r/GUI/Tab.cpp:2709
+#: src/libslic3r/GCode.cpp:516 src/slic3r/GUI/Tab.cpp:2818
 msgid "Color Change G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:802 src/libslic3r/PrintConfig.cpp:2599
-#: src/slic3r/GUI/Tab.cpp:2718
+#: src/libslic3r/GCode.cpp:517 src/libslic3r/PrintConfig.cpp:2636
+#: src/slic3r/GUI/Tab.cpp:2828
 msgid "Pause Print G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:803 src/slic3r/GUI/Tab.cpp:2727
+#: src/libslic3r/GCode.cpp:518 src/slic3r/GUI/Tab.cpp:2838
 msgid "Template Custom G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:806
+#: src/libslic3r/GCode.cpp:521
 msgid "Filament Start G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:813
+#: src/libslic3r/GCode.cpp:528
 msgid "Filament End G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:821 src/libslic3r/PrintConfig.cpp:2608
-#: src/slic3r/GUI/Tab.cpp:2187 src/slic3r/GUI/Tab.cpp:2645
-#: src/slic3r/GUI/Tab.cpp:4790
+#: src/libslic3r/GCode.cpp:536 src/libslic3r/PrintConfig.cpp:2645
+#: src/slic3r/GUI/Tab.cpp:2262 src/slic3r/GUI/Tab.cpp:2748
+#: src/slic3r/GUI/Tab.cpp:4925
 msgid "Custom G-code"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:854
+#: src/libslic3r/GCode.cpp:569
 msgid "In the custom G-code were found reserved keywords:"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:856
+#: src/libslic3r/GCode.cpp:571
 msgid ""
 "This may cause problems in g-code visualization and printing time estimation."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:1252 src/libslic3r/GCode.cpp:1263
+#: src/libslic3r/GCode.cpp:1106 src/libslic3r/GCode.cpp:1117
 msgid "No extrusions were generated for objects."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:1459
+#: src/libslic3r/GCode.cpp:1321
 msgid ""
 "Your print is very close to the priming regions. Make sure there is no "
 "collision."
@@ -398,173 +398,173 @@ msgstr ""
 msgid "write calledback failed"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1500 src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
+#: src/libslic3r/Preset.cpp:1517 src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
 msgid "print"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1501 src/slic3r/GUI/ConfigWizard.cpp:846
+#: src/libslic3r/Preset.cpp:1518 src/slic3r/GUI/ConfigWizard.cpp:856
 msgid "filament"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1502 src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
+#: src/libslic3r/Preset.cpp:1519 src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
 msgid "SLA print"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1503 src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
-#: src/slic3r/GUI/ConfigWizard.cpp:846 src/slic3r/GUI/GUI.cpp:339
-#: src/slic3r/GUI/Plater.cpp:876
+#: src/libslic3r/Preset.cpp:1520 src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
+#: src/slic3r/GUI/ConfigWizard.cpp:856 src/slic3r/GUI/GUI.cpp:339
+#: src/slic3r/GUI/Plater.cpp:879
 msgid "SLA material"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1504 src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
+#: src/libslic3r/Preset.cpp:1521 src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
 msgid "printer"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:512
+#: src/libslic3r/Print.cpp:513
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:515
+#: src/libslic3r/Print.cpp:516
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:520
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:522
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:527
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "Avoid crossing perimeters option and avoid crossing curled overhangs option "
 "cannot be both enabled together."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:536
+#: src/libslic3r/Print.cpp:537
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:540
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:544
+#: src/libslic3r/Print.cpp:545
 msgid ""
 "Machine limits cannot be emitted to G-Code when Klipper firmware flavor is "
 "used. Change the value of machine_limits_usage."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:571
+#: src/libslic3r/Print.cpp:572
 #, possible-boost-format
 msgid "The object %1% exceeds the maximum build volume height."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:572
+#: src/libslic3r/Print.cpp:573
 #, possible-boost-format
 msgid ""
 "While the object %1% itself fits the build volume, its last layer exceeds "
 "the maximum build volume height."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:573
+#: src/libslic3r/Print.cpp:574
 msgid ""
 "You might want to reduce the size of your model or change current print "
 "settings and retry."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:589
+#: src/libslic3r/Print.cpp:590
 msgid "Variable layer height is not supported with Organic supports."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:602
+#: src/libslic3r/Print.cpp:603
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:609
+#: src/libslic3r/Print.cpp:610
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, Klipper, RepRap/"
 "Sprinter, RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:611
+#: src/libslic3r/Print.cpp:612
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:613
+#: src/libslic3r/Print.cpp:614
 msgid ""
 "Ooze prevention is only supported with the wipe tower when "
 "'single_extruder_multi_material' is off."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:615
+#: src/libslic3r/Print.cpp:616
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:617
+#: src/libslic3r/Print.cpp:618
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:627
+#: src/libslic3r/Print.cpp:628
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:629
+#: src/libslic3r/Print.cpp:630
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:632
+#: src/libslic3r/Print.cpp:633
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:634
+#: src/libslic3r/Print.cpp:635
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:659
+#: src/libslic3r/Print.cpp:660
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:683
+#: src/libslic3r/Print.cpp:684
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:696
+#: src/libslic3r/Print.cpp:697
 #, possible-boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:699
+#: src/libslic3r/Print.cpp:700
 #, possible-boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:710
+#: src/libslic3r/Print.cpp:711
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -572,13 +572,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:718
+#: src/libslic3r/Print.cpp:719
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:722 src/slic3r/GUI/ConfigManipulation.cpp:142
+#: src/libslic3r/Print.cpp:723 src/slic3r/GUI/ConfigManipulation.cpp:142
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -586,120 +586,120 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:731
+#: src/libslic3r/Print.cpp:732
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:733
+#: src/libslic3r/Print.cpp:734
 msgid ""
 "Organic support branch diameter must not be smaller than 2x support material "
 "extrusion width."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:735
+#: src/libslic3r/Print.cpp:736
 msgid ""
 "Organic support branch diameter must not be smaller than support tree tip "
 "diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:769
+#: src/libslic3r/Print.cpp:770
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:774
+#: src/libslic3r/Print.cpp:775
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:796
 msgid ""
 "Relative extruder addressing requires resetting the extruder position at "
 "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
 "layer_gcode."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:797
+#: src/libslic3r/Print.cpp:798
 msgid ""
 "\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
 "absolute extruder addressing."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:799
+#: src/libslic3r/Print.cpp:800
 msgid ""
 "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
 "extruder addressing."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:977
+#: src/libslic3r/Print.cpp:980
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1037
+#: src/libslic3r/Print.cpp:1040
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1041
+#: src/libslic3r/Print.cpp:1044
 msgid "Generating G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1265
+#: src/libslic3r/Print.cpp:1270
 msgid "Alert if supports needed"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes that the model has long bridging extrusions which may print badly
-#: src/libslic3r/Print.cpp:1271
+#: src/libslic3r/Print.cpp:1276
 msgid "Long bridging extrusions"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes bridge anchors/turns in the air, which will definitely print badly
-#: src/libslic3r/Print.cpp:1273
+#: src/libslic3r/Print.cpp:1278
 msgid "Floating bridge anchors"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes that the print has large overhang area which will print badly or not print at all.
-#: src/libslic3r/Print.cpp:1277
+#: src/libslic3r/Print.cpp:1282
 msgid "Collapsing overhang"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes extrusions that are not supported enough and come out curled or loose.
-#: src/libslic3r/Print.cpp:1280
+#: src/libslic3r/Print.cpp:1285
 msgid "Loose extrusions"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes that the print has low bed adhesion and may became loose.
-#: src/libslic3r/Print.cpp:1284
+#: src/libslic3r/Print.cpp:1289
 msgid "Low bed adhesion"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes that the object has part that is not connected to the bed and will not print at all without supports.
-#: src/libslic3r/Print.cpp:1286
+#: src/libslic3r/Print.cpp:1291
 msgid "Floating object part"
 msgstr ""
 
 #. TRN Alert when support is needed. Describes that the object has thin part that may brake during printing
-#: src/libslic3r/Print.cpp:1288
+#: src/libslic3r/Print.cpp:1293
 msgid "Thin fragile part"
 msgstr ""
 
 #. TRN this translation rule is used to translate lists of uknown size on single line. The first argument is element of the list,
 #. the second argument may be element or rest of the list. For most languages, this does not need translation, but some use different
 #. separator than comma and some use blank space in front of the separator.
-#: src/libslic3r/Print.cpp:1297
+#: src/libslic3r/Print.cpp:1302
 #, possible-boost-format
 msgid "%1%, %2%"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1396
+#: src/libslic3r/Print.cpp:1401
 msgid "Consider enabling supports."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1398
+#: src/libslic3r/Print.cpp:1403
 msgid "Also consider enabling brim."
 msgstr ""
 
 #. TRN Alert message for detected print issues. first argument is a list of detected issues.
-#: src/libslic3r/Print.cpp:1402
+#: src/libslic3r/Print.cpp:1407
 #, possible-boost-format
 msgid ""
 "Detected print stability issues:\n"
@@ -710,95 +710,95 @@ msgstr ""
 msgid "Failed processing of the output_filename_format template."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:272 src/libslic3r/PrintConfig.cpp:273
+#: src/libslic3r/PrintConfig.cpp:281 src/libslic3r/PrintConfig.cpp:282
 msgid "Printer technology"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:278
+#: src/libslic3r/PrintConfig.cpp:287
 msgid "Bed shape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:283
+#: src/libslic3r/PrintConfig.cpp:292
 msgid "Bed custom texture"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:288
+#: src/libslic3r/PrintConfig.cpp:297
 msgid "Bed custom model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:293
+#: src/libslic3r/PrintConfig.cpp:302
 msgid "Elephant foot compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:294 src/libslic3r/PrintConfig.cpp:532
-#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1618
-#: src/libslic3r/PrintConfig.cpp:1665 src/libslic3r/PrintConfig.cpp:1676
-#: src/libslic3r/PrintConfig.cpp:2638 src/libslic3r/PrintConfig.cpp:2648
-#: src/libslic3r/PrintConfig.cpp:3317 src/libslic3r/PrintConfig.cpp:3351
-#: src/libslic3r/PrintConfig.cpp:3362 src/libslic3r/PrintConfig.cpp:3377
-#: src/libslic3r/PrintConfig.cpp:3390 src/libslic3r/PrintConfig.cpp:3399
-#: src/libslic3r/PrintConfig.cpp:3411 src/libslic3r/PrintConfig.cpp:3796
+#: src/libslic3r/PrintConfig.cpp:303 src/libslic3r/PrintConfig.cpp:563
+#: src/libslic3r/PrintConfig.cpp:1573 src/libslic3r/PrintConfig.cpp:1655
+#: src/libslic3r/PrintConfig.cpp:1702 src/libslic3r/PrintConfig.cpp:1713
+#: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2685
+#: src/libslic3r/PrintConfig.cpp:3342 src/libslic3r/PrintConfig.cpp:3376
+#: src/libslic3r/PrintConfig.cpp:3387 src/libslic3r/PrintConfig.cpp:3402
+#: src/libslic3r/PrintConfig.cpp:3415 src/libslic3r/PrintConfig.cpp:3424
+#: src/libslic3r/PrintConfig.cpp:3436 src/libslic3r/PrintConfig.cpp:3821
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1556
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:1468
-#: src/slic3r/GUI/Tab.cpp:1503 src/slic3r/GUI/Tab.cpp:1644
-#: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2123
-#: src/slic3r/GUI/Tab.cpp:2637 src/slic3r/GUI/Tab.cpp:5298
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:1476
+#: src/slic3r/GUI/Tab.cpp:1511 src/slic3r/GUI/Tab.cpp:1652
+#: src/slic3r/GUI/Tab.cpp:1657 src/slic3r/GUI/Tab.cpp:2198
+#: src/slic3r/GUI/Tab.cpp:2740 src/slic3r/GUI/Tab.cpp:5437
 msgid "Advanced"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:295
+#: src/libslic3r/PrintConfig.cpp:304
 msgid ""
 "The first layer will be shrunk in the XY plane by the configured value to "
 "compensate for the 1st layer squish aka an Elephant Foot effect."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:321
-#: src/libslic3r/PrintConfig.cpp:328 src/libslic3r/PrintConfig.cpp:497
-#: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:676
-#: src/libslic3r/PrintConfig.cpp:743 src/libslic3r/PrintConfig.cpp:751
-#: src/libslic3r/PrintConfig.cpp:801 src/libslic3r/PrintConfig.cpp:921
-#: src/libslic3r/PrintConfig.cpp:932 src/libslic3r/PrintConfig.cpp:950
-#: src/libslic3r/PrintConfig.cpp:1155 src/libslic3r/PrintConfig.cpp:1338
-#: src/libslic3r/PrintConfig.cpp:1402 src/libslic3r/PrintConfig.cpp:1412
-#: src/libslic3r/PrintConfig.cpp:1713 src/libslic3r/PrintConfig.cpp:1904
-#: src/libslic3r/PrintConfig.cpp:1965 src/libslic3r/PrintConfig.cpp:1983
-#: src/libslic3r/PrintConfig.cpp:2001 src/libslic3r/PrintConfig.cpp:2059
-#: src/libslic3r/PrintConfig.cpp:2069 src/libslic3r/PrintConfig.cpp:2191
-#: src/libslic3r/PrintConfig.cpp:2200 src/libslic3r/PrintConfig.cpp:2219
-#: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2252
-#: src/libslic3r/PrintConfig.cpp:2260 src/libslic3r/PrintConfig.cpp:2301
-#: src/libslic3r/PrintConfig.cpp:2309 src/libslic3r/PrintConfig.cpp:2319
-#: src/libslic3r/PrintConfig.cpp:2327 src/libslic3r/PrintConfig.cpp:2335
-#: src/libslic3r/PrintConfig.cpp:2401 src/libslic3r/PrintConfig.cpp:2641
-#: src/libslic3r/PrintConfig.cpp:2708 src/libslic3r/PrintConfig.cpp:2723
-#: src/libslic3r/PrintConfig.cpp:2822 src/libslic3r/PrintConfig.cpp:2831
-#: src/libslic3r/PrintConfig.cpp:2877 src/libslic3r/PrintConfig.cpp:2966
-#: src/libslic3r/PrintConfig.cpp:2978 src/libslic3r/PrintConfig.cpp:3004
-#: src/libslic3r/PrintConfig.cpp:3131 src/libslic3r/PrintConfig.cpp:3219
-#: src/libslic3r/PrintConfig.cpp:3226 src/libslic3r/PrintConfig.cpp:3233
-#: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3290
-#: src/libslic3r/PrintConfig.cpp:3321 src/libslic3r/PrintConfig.cpp:3331
-#: src/libslic3r/PrintConfig.cpp:3484 src/libslic3r/PrintConfig.cpp:3493
-#: src/libslic3r/PrintConfig.cpp:3502 src/libslic3r/PrintConfig.cpp:3512
-#: src/libslic3r/PrintConfig.cpp:3545 src/libslic3r/PrintConfig.cpp:3588
-#: src/libslic3r/PrintConfig.cpp:3598 src/libslic3r/PrintConfig.cpp:3610
-#: src/libslic3r/PrintConfig.cpp:3630 src/libslic3r/PrintConfig.cpp:3645
-#: src/libslic3r/PrintConfig.cpp:3655 src/libslic3r/PrintConfig.cpp:3798
-#: src/libslic3r/PrintConfig.cpp:3835 src/libslic3r/PrintConfig.cpp:4036
-#: src/libslic3r/PrintConfig.cpp:4051 src/libslic3r/PrintConfig.cpp:4065
-#: src/libslic3r/PrintConfig.cpp:4076 src/libslic3r/PrintConfig.cpp:4089
-#: src/libslic3r/PrintConfig.cpp:4134 src/libslic3r/PrintConfig.cpp:4144
-#: src/libslic3r/PrintConfig.cpp:4153 src/libslic3r/PrintConfig.cpp:4163
-#: src/libslic3r/PrintConfig.cpp:4179 src/libslic3r/PrintConfig.cpp:4203
-#: src/libslic3r/PrintConfig.cpp:4230 src/slic3r/GUI/BedShapeDialog.cpp:74
-#: src/slic3r/GUI/ConfigWizard.cpp:346 src/slic3r/GUI/ConfigWizard.cpp:1888
-#: src/slic3r/GUI/ConfigWizard.cpp:1924 src/slic3r/GUI/ConfigWizard.cpp:1938
+#: src/libslic3r/PrintConfig.cpp:306 src/libslic3r/PrintConfig.cpp:331
+#: src/libslic3r/PrintConfig.cpp:338 src/libslic3r/PrintConfig.cpp:528
+#: src/libslic3r/PrintConfig.cpp:684 src/libslic3r/PrintConfig.cpp:707
+#: src/libslic3r/PrintConfig.cpp:774 src/libslic3r/PrintConfig.cpp:782
+#: src/libslic3r/PrintConfig.cpp:832 src/libslic3r/PrintConfig.cpp:952
+#: src/libslic3r/PrintConfig.cpp:963 src/libslic3r/PrintConfig.cpp:981
+#: src/libslic3r/PrintConfig.cpp:1186 src/libslic3r/PrintConfig.cpp:1369
+#: src/libslic3r/PrintConfig.cpp:1433 src/libslic3r/PrintConfig.cpp:1443
+#: src/libslic3r/PrintConfig.cpp:1750 src/libslic3r/PrintConfig.cpp:1941
+#: src/libslic3r/PrintConfig.cpp:2002 src/libslic3r/PrintConfig.cpp:2020
+#: src/libslic3r/PrintConfig.cpp:2038 src/libslic3r/PrintConfig.cpp:2096
+#: src/libslic3r/PrintConfig.cpp:2106 src/libslic3r/PrintConfig.cpp:2228
+#: src/libslic3r/PrintConfig.cpp:2237 src/libslic3r/PrintConfig.cpp:2256
+#: src/libslic3r/PrintConfig.cpp:2277 src/libslic3r/PrintConfig.cpp:2289
+#: src/libslic3r/PrintConfig.cpp:2297 src/libslic3r/PrintConfig.cpp:2338
+#: src/libslic3r/PrintConfig.cpp:2346 src/libslic3r/PrintConfig.cpp:2356
+#: src/libslic3r/PrintConfig.cpp:2364 src/libslic3r/PrintConfig.cpp:2372
+#: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2678
+#: src/libslic3r/PrintConfig.cpp:2745 src/libslic3r/PrintConfig.cpp:2760
+#: src/libslic3r/PrintConfig.cpp:2859 src/libslic3r/PrintConfig.cpp:2868
+#: src/libslic3r/PrintConfig.cpp:2914 src/libslic3r/PrintConfig.cpp:3003
+#: src/libslic3r/PrintConfig.cpp:3015 src/libslic3r/PrintConfig.cpp:3041
+#: src/libslic3r/PrintConfig.cpp:3156 src/libslic3r/PrintConfig.cpp:3244
+#: src/libslic3r/PrintConfig.cpp:3251 src/libslic3r/PrintConfig.cpp:3258
+#: src/libslic3r/PrintConfig.cpp:3272 src/libslic3r/PrintConfig.cpp:3315
+#: src/libslic3r/PrintConfig.cpp:3346 src/libslic3r/PrintConfig.cpp:3356
+#: src/libslic3r/PrintConfig.cpp:3509 src/libslic3r/PrintConfig.cpp:3518
+#: src/libslic3r/PrintConfig.cpp:3527 src/libslic3r/PrintConfig.cpp:3537
+#: src/libslic3r/PrintConfig.cpp:3570 src/libslic3r/PrintConfig.cpp:3613
+#: src/libslic3r/PrintConfig.cpp:3623 src/libslic3r/PrintConfig.cpp:3635
+#: src/libslic3r/PrintConfig.cpp:3655 src/libslic3r/PrintConfig.cpp:3670
+#: src/libslic3r/PrintConfig.cpp:3680 src/libslic3r/PrintConfig.cpp:3823
+#: src/libslic3r/PrintConfig.cpp:3860 src/libslic3r/PrintConfig.cpp:4061
+#: src/libslic3r/PrintConfig.cpp:4076 src/libslic3r/PrintConfig.cpp:4090
+#: src/libslic3r/PrintConfig.cpp:4101 src/libslic3r/PrintConfig.cpp:4114
+#: src/libslic3r/PrintConfig.cpp:4159 src/libslic3r/PrintConfig.cpp:4169
+#: src/libslic3r/PrintConfig.cpp:4178 src/libslic3r/PrintConfig.cpp:4188
+#: src/libslic3r/PrintConfig.cpp:4204 src/libslic3r/PrintConfig.cpp:4228
+#: src/libslic3r/PrintConfig.cpp:4255 src/slic3r/GUI/BedShapeDialog.cpp:74
+#: src/slic3r/GUI/ConfigWizard.cpp:346 src/slic3r/GUI/ConfigWizard.cpp:1895
+#: src/slic3r/GUI/ConfigWizard.cpp:1931 src/slic3r/GUI/ConfigWizard.cpp:1945
 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:104
-#: src/slic3r/GUI/GCodeViewer.cpp:3528 src/slic3r/GUI/GCodeViewer.cpp:3534
-#: src/slic3r/GUI/GCodeViewer.cpp:3542 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:248
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:557
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:577
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2355
+#: src/slic3r/GUI/GCodeViewer.cpp:3628 src/slic3r/GUI/GCodeViewer.cpp:3634
+#: src/slic3r/GUI/GCodeViewer.cpp:3642 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:249
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:558
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:578
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2361
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1226
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1992
 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:149
@@ -811,65 +811,66 @@ msgstr ""
 msgid "mm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:303
+#: src/libslic3r/PrintConfig.cpp:312
 msgid "G-code thumbnails"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:304
+#: src/libslic3r/PrintConfig.cpp:313
 msgid ""
-"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
-"following format: \"XxY, XxY, ...\""
+"Picture sizes to be stored into a .gcode / .bgcode and .sl1 / .sl1s files, "
+"in the following format: \"XxY/EXT, XxY/EXT, ...\"\n"
+"Currently supported extensions are PNG, QOI and JPG."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:310
+#: src/libslic3r/PrintConfig.cpp:320
 msgid "Format of G-code thumbnails"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:311
+#: src/libslic3r/PrintConfig.cpp:321
 msgid ""
 "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
 "QOI for low memory firmware"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:317 src/slic3r/GUI/ConfigManipulation.cpp:55
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:33 src/slic3r/GUI/Tab.cpp:1425
+#: src/libslic3r/PrintConfig.cpp:327 src/slic3r/GUI/ConfigManipulation.cpp:55
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:33 src/slic3r/GUI/Tab.cpp:1433
 msgid "Layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:318 src/libslic3r/PrintConfig.cpp:442
-#: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:493
-#: src/libslic3r/PrintConfig.cpp:883 src/libslic3r/PrintConfig.cpp:891
-#: src/libslic3r/PrintConfig.cpp:900 src/libslic3r/PrintConfig.cpp:1335
-#: src/libslic3r/PrintConfig.cpp:1419 src/libslic3r/PrintConfig.cpp:1656
-#: src/libslic3r/PrintConfig.cpp:2049 src/libslic3r/PrintConfig.cpp:2124
-#: src/libslic3r/PrintConfig.cpp:2358 src/libslic3r/PrintConfig.cpp:3050
-#: src/libslic3r/PrintConfig.cpp:3058 src/libslic3r/PrintConfig.cpp:3118
-#: src/libslic3r/PrintConfig.cpp:3126 src/libslic3r/PrintConfig.cpp:3337
+#: src/libslic3r/PrintConfig.cpp:328 src/libslic3r/PrintConfig.cpp:473
+#: src/libslic3r/PrintConfig.cpp:516 src/libslic3r/PrintConfig.cpp:524
+#: src/libslic3r/PrintConfig.cpp:914 src/libslic3r/PrintConfig.cpp:922
+#: src/libslic3r/PrintConfig.cpp:931 src/libslic3r/PrintConfig.cpp:1366
+#: src/libslic3r/PrintConfig.cpp:1450 src/libslic3r/PrintConfig.cpp:1693
+#: src/libslic3r/PrintConfig.cpp:2086 src/libslic3r/PrintConfig.cpp:2161
+#: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:3087
+#: src/libslic3r/PrintConfig.cpp:3095 src/libslic3r/PrintConfig.cpp:3143
+#: src/libslic3r/PrintConfig.cpp:3151 src/libslic3r/PrintConfig.cpp:3362
 #: src/slic3r/GUI/GUI_Factories.cpp:58 src/slic3r/GUI/GUI_Factories.cpp:131
 msgid "Layers and Perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:319
+#: src/libslic3r/PrintConfig.cpp:329
 msgid ""
 "This setting controls the height (and thus the total number) of the slices/"
 "layers. Thinner layers give better accuracy but take more time to print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:326 src/slic3r/GUI/ConfigWizard.cpp:1887
+#: src/libslic3r/PrintConfig.cpp:336 src/slic3r/GUI/ConfigWizard.cpp:1894
 msgid "Max print height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:327
+#: src/libslic3r/PrintConfig.cpp:337
 msgid ""
 "Set this to the maximum height that can be reached by your extruder while "
 "printing."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:335
+#: src/libslic3r/PrintConfig.cpp:345
 msgid "Hostname, IP or URL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:336
+#: src/libslic3r/PrintConfig.cpp:346
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the hostname, IP address or URL of the printer host instance. Print host "
@@ -878,82 +879,114 @@ msgid ""
 "password@your-octopi-address/"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:345
+#: src/libslic3r/PrintConfig.cpp:355
 msgid "API Key / Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:346
+#: src/libslic3r/PrintConfig.cpp:356
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the API Key or the password required for authentication."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:353 src/slic3r/GUI/GCodeViewer.cpp:4004
-#: src/slic3r/GUI/GUI.cpp:340 src/slic3r/GUI/Plater.cpp:877
+#: src/libslic3r/PrintConfig.cpp:363 src/slic3r/GUI/GCodeViewer.cpp:4112
+#: src/slic3r/GUI/GUI.cpp:340 src/slic3r/GUI/Plater.cpp:880
 msgid "Printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:354
+#: src/libslic3r/PrintConfig.cpp:364
 msgid "Name of the printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:361
+#: src/libslic3r/PrintConfig.cpp:371
 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:411
 msgid "HTTPS CA File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:362
+#: src/libslic3r/PrintConfig.cpp:372
 msgid ""
 "Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
 "in crt/pem format. If left blank, the default OS CA certificate repository "
 "is used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:371 src/slic3r/GUI/ConfigSnapshotDialog.cpp:31
+#: src/libslic3r/PrintConfig.cpp:381 src/slic3r/GUI/ConfigSnapshotDialog.cpp:31
 msgid "User"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:378
+#: src/libslic3r/PrintConfig.cpp:388
 msgid "Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:386
+#: src/libslic3r/PrintConfig.cpp:396
 msgid "Ignore HTTPS certificate revocation checks"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:387
+#: src/libslic3r/PrintConfig.cpp:397
 msgid ""
 "Ignore HTTPS certificate revocation checks in case of missing or offline "
 "distribution points. One may want to enable this option for self signed "
 "certificates if connection fails."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:394
+#: src/libslic3r/PrintConfig.cpp:404
 msgid "Printer preset names"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:395
+#: src/libslic3r/PrintConfig.cpp:405
 msgid "Names of presets related to the physical printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:400
+#: src/libslic3r/PrintConfig.cpp:410
 msgid "Authorization Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:403
+#: src/libslic3r/PrintConfig.cpp:413
 msgid "API key"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:404
+#: src/libslic3r/PrintConfig.cpp:414
 msgid "HTTP digest"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:424
+#: src/libslic3r/PrintConfig.cpp:432
+msgid "Arc fitting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:433
+msgid ""
+"Enable to get a G-code file which has G2 and G3 moves. G-code resolution "
+"will be used as the fitting tolerance."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:444
+msgid "Arc fitting tolerance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:894
+#: src/libslic3r/PrintConfig.cpp:1008 src/libslic3r/PrintConfig.cpp:1357
+#: src/libslic3r/PrintConfig.cpp:1580 src/libslic3r/PrintConfig.cpp:1632
+#: src/libslic3r/PrintConfig.cpp:1659 src/libslic3r/PrintConfig.cpp:2142
+#: src/libslic3r/PrintConfig.cpp:2530 src/libslic3r/PrintConfig.cpp:2714
+#: src/libslic3r/PrintConfig.cpp:2799 src/libslic3r/PrintConfig.cpp:3120
+#: src/libslic3r/PrintConfig.cpp:3380 src/libslic3r/PrintConfig.cpp:3395
+#: src/libslic3r/PrintConfig.cpp:3429 src/libslic3r/PrintConfig.cpp:3441
+msgid "mm or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:446
+msgid ""
+"When using the arc_fitting option, allow the curve to deviate certain % from "
+"the collection of straight paths.\n"
+"Can be either a mm value or a percentage of the current extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:455
 msgid "Avoid crossing curled overhangs (Experimental)"
 msgstr ""
 
 #. TRN PrintSettings: "Avoid crossing curled overhangs (Experimental)"
-#: src/libslic3r/PrintConfig.cpp:426
+#: src/libslic3r/PrintConfig.cpp:457
 msgid ""
 "Plan travel moves such that the extruder avoids areas where the filament may "
 "be curled up. This is mostly happening on steeper rounded overhangs and may "
@@ -961,22 +994,22 @@ msgid ""
 "the G-code generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:433
+#: src/libslic3r/PrintConfig.cpp:464
 msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:434
+#: src/libslic3r/PrintConfig.cpp:465
 msgid ""
 "Optimize travel moves in order to minimize the crossing of perimeters. This "
 "is mostly useful with Bowden extruders which suffer from oozing. This "
 "feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:441
+#: src/libslic3r/PrintConfig.cpp:472
 msgid "Avoid crossing perimeters - Max detour length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:443
+#: src/libslic3r/PrintConfig.cpp:474
 msgid ""
 "The maximum detour length for avoid crossing perimeters. If the detour is "
 "longer than this value, avoid crossing perimeters is not applied for this "
@@ -984,43 +1017,43 @@ msgid ""
 "as percentage (for example 50%) of a direct travel path."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:446
+#: src/libslic3r/PrintConfig.cpp:477
 msgid "mm or % (zero to disable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:453 src/libslic3r/PrintConfig.cpp:3039
+#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:3076
 msgid "Other layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:454
+#: src/libslic3r/PrintConfig.cpp:485
 msgid ""
 "Bed temperature for layers after the first one. Set this to zero to disable "
 "bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:456 src/libslic3r/PrintConfig.cpp:1314
-#: src/libslic3r/PrintConfig.cpp:1369 src/libslic3r/PrintConfig.cpp:3042
-#: src/libslic3r/PrintConfig.cpp:3843 src/slic3r/GUI/ConfigWizard.cpp:2016
-#: src/slic3r/GUI/ConfigWizard.cpp:2030
+#: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:1345
+#: src/libslic3r/PrintConfig.cpp:1400 src/libslic3r/PrintConfig.cpp:3079
+#: src/libslic3r/PrintConfig.cpp:3868 src/slic3r/GUI/ConfigWizard.cpp:2023
+#: src/slic3r/GUI/ConfigWizard.cpp:2037
 msgid "°C"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:457
+#: src/libslic3r/PrintConfig.cpp:488
 msgid "Bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:464
+#: src/libslic3r/PrintConfig.cpp:495
 msgid ""
 "This custom code is inserted at every layer change, right before the Z move. "
 "Note that you can use placeholder variables for all Slic3r settings as well "
 "as [layer_num] and [layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:474
+#: src/libslic3r/PrintConfig.cpp:505
 msgid "Between objects G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:475
+#: src/libslic3r/PrintConfig.cpp:506
 msgid ""
 "This code is inserted between objects when using sequential printing. By "
 "default extruder and bed temperature are reset using non-wait command; "
@@ -1031,109 +1064,109 @@ msgid ""
 msgstr ""
 
 #. TRN Print Settings: "Bottom solid layers"
-#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:492
+#: src/libslic3r/PrintConfig.cpp:515 src/libslic3r/PrintConfig.cpp:523
 msgctxt "Layers"
 msgid "Bottom"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:486
+#: src/libslic3r/PrintConfig.cpp:517
 msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:487
+#: src/libslic3r/PrintConfig.cpp:518
 msgid "Bottom solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:494
+#: src/libslic3r/PrintConfig.cpp:525
 msgid ""
 "The number of bottom solid layers is increased above bottom_solid_layers if "
 "necessary to satisfy minimum thickness of bottom shell."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:496
+#: src/libslic3r/PrintConfig.cpp:527
 msgid "Minimum bottom shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:502
+#: src/libslic3r/PrintConfig.cpp:533
 msgid "Bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:503
+#: src/libslic3r/PrintConfig.cpp:534
 msgid ""
 "This is the acceleration your printer will use for bridges. Set zero to "
 "disable acceleration control for bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:761
-#: src/libslic3r/PrintConfig.cpp:1295 src/libslic3r/PrintConfig.cpp:1304
-#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1500
-#: src/libslic3r/PrintConfig.cpp:1509 src/libslic3r/PrintConfig.cpp:1518
-#: src/libslic3r/PrintConfig.cpp:1813 src/libslic3r/PrintConfig.cpp:1862
-#: src/libslic3r/PrintConfig.cpp:1874 src/libslic3r/PrintConfig.cpp:1884
-#: src/libslic3r/PrintConfig.cpp:2077 src/libslic3r/PrintConfig.cpp:2085
+#: src/libslic3r/PrintConfig.cpp:536 src/libslic3r/PrintConfig.cpp:792
+#: src/libslic3r/PrintConfig.cpp:1326 src/libslic3r/PrintConfig.cpp:1335
+#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1537
+#: src/libslic3r/PrintConfig.cpp:1546 src/libslic3r/PrintConfig.cpp:1555
+#: src/libslic3r/PrintConfig.cpp:1850 src/libslic3r/PrintConfig.cpp:1899
+#: src/libslic3r/PrintConfig.cpp:1911 src/libslic3r/PrintConfig.cpp:1921
+#: src/libslic3r/PrintConfig.cpp:2114 src/libslic3r/PrintConfig.cpp:2122
 msgid "mm/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:511
+#: src/libslic3r/PrintConfig.cpp:542
 msgid "Bridging angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:512 src/libslic3r/PrintConfig.cpp:830
-#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:1230
-#: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:1268
-#: src/libslic3r/PrintConfig.cpp:1488 src/libslic3r/PrintConfig.cpp:1525
-#: src/libslic3r/PrintConfig.cpp:1589 src/libslic3r/PrintConfig.cpp:1628
-#: src/libslic3r/PrintConfig.cpp:2460 src/libslic3r/PrintConfig.cpp:2477
-#: src/libslic3r/PrintConfig.cpp:3305 src/slic3r/GUI/ConfigManipulation.cpp:199
+#: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:861
+#: src/libslic3r/PrintConfig.cpp:881 src/libslic3r/PrintConfig.cpp:1261
+#: src/libslic3r/PrintConfig.cpp:1274 src/libslic3r/PrintConfig.cpp:1299
+#: src/libslic3r/PrintConfig.cpp:1525 src/libslic3r/PrintConfig.cpp:1562
+#: src/libslic3r/PrintConfig.cpp:1626 src/libslic3r/PrintConfig.cpp:1665
+#: src/libslic3r/PrintConfig.cpp:2497 src/libslic3r/PrintConfig.cpp:2514
+#: src/libslic3r/PrintConfig.cpp:3330 src/slic3r/GUI/ConfigManipulation.cpp:199
 #: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:132
-#: src/slic3r/GUI/Plater.cpp:492 src/slic3r/GUI/Tab.cpp:1481
-#: src/slic3r/GUI/Tab.cpp:1483
+#: src/slic3r/GUI/Plater.cpp:495 src/slic3r/GUI/Tab.cpp:1489
+#: src/slic3r/GUI/Tab.cpp:1491
 msgid "Infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:513
+#: src/libslic3r/PrintConfig.cpp:544
 msgid ""
 "Bridging angle override. If left to zero, the bridging angle will be "
 "calculated automatically. Otherwise the provided angle will be used for all "
 "bridges. Use 180° for zero angle."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:516 src/libslic3r/PrintConfig.cpp:1234
-#: src/libslic3r/PrintConfig.cpp:2380 src/libslic3r/PrintConfig.cpp:2390
-#: src/libslic3r/PrintConfig.cpp:2689 src/libslic3r/PrintConfig.cpp:2923
-#: src/libslic3r/PrintConfig.cpp:2943 src/libslic3r/PrintConfig.cpp:2955
-#: src/libslic3r/PrintConfig.cpp:2992 src/libslic3r/PrintConfig.cpp:3240
-#: src/libslic3r/PrintConfig.cpp:3256 src/libslic3r/PrintConfig.cpp:3382
-#: src/libslic3r/PrintConfig.cpp:3620 src/libslic3r/PrintConfig.cpp:4109
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:276
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2553
+#: src/libslic3r/PrintConfig.cpp:547 src/libslic3r/PrintConfig.cpp:1265
+#: src/libslic3r/PrintConfig.cpp:2417 src/libslic3r/PrintConfig.cpp:2427
+#: src/libslic3r/PrintConfig.cpp:2726 src/libslic3r/PrintConfig.cpp:2960
+#: src/libslic3r/PrintConfig.cpp:2980 src/libslic3r/PrintConfig.cpp:2992
+#: src/libslic3r/PrintConfig.cpp:3029 src/libslic3r/PrintConfig.cpp:3265
+#: src/libslic3r/PrintConfig.cpp:3281 src/libslic3r/PrintConfig.cpp:3407
+#: src/libslic3r/PrintConfig.cpp:3645 src/libslic3r/PrintConfig.cpp:4134
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:277
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2559
 msgid "°"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:522
+#: src/libslic3r/PrintConfig.cpp:553
 msgid "Bridges fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:523
+#: src/libslic3r/PrintConfig.cpp:554
 msgid "This fan speed is enforced during all bridges and overhangs."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:524 src/libslic3r/PrintConfig.cpp:615
-#: src/libslic3r/PrintConfig.cpp:624 src/libslic3r/PrintConfig.cpp:633
-#: src/libslic3r/PrintConfig.cpp:642 src/libslic3r/PrintConfig.cpp:1245
-#: src/libslic3r/PrintConfig.cpp:1703 src/libslic3r/PrintConfig.cpp:1892
-#: src/libslic3r/PrintConfig.cpp:1955 src/libslic3r/PrintConfig.cpp:2209
-#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:3032
-#: src/libslic3r/PrintConfig.cpp:3265 src/libslic3r/PrintConfig.cpp:3523
-#: src/libslic3r/PrintConfig.cpp:3749 src/libslic3r/PrintConfig.cpp:4028
+#: src/libslic3r/PrintConfig.cpp:555 src/libslic3r/PrintConfig.cpp:646
+#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:664
+#: src/libslic3r/PrintConfig.cpp:673 src/libslic3r/PrintConfig.cpp:1276
+#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1929
+#: src/libslic3r/PrintConfig.cpp:1992 src/libslic3r/PrintConfig.cpp:2246
+#: src/libslic3r/PrintConfig.cpp:2305 src/libslic3r/PrintConfig.cpp:3069
+#: src/libslic3r/PrintConfig.cpp:3290 src/libslic3r/PrintConfig.cpp:3548
+#: src/libslic3r/PrintConfig.cpp:3774 src/libslic3r/PrintConfig.cpp:4053
 msgid "%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:531
+#: src/libslic3r/PrintConfig.cpp:562
 msgid "Bridge flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:533
+#: src/libslic3r/PrintConfig.cpp:564
 msgid ""
 "This factor affects the amount of plastic for bridging. You can decrease it "
 "slightly to pull the extrudates and prevent sagging, although default "
@@ -1141,49 +1174,49 @@ msgid ""
 "before tweaking this."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:543
+#: src/libslic3r/PrintConfig.cpp:574
 msgid "Bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:544 src/libslic3r/PrintConfig.cpp:554
-#: src/libslic3r/PrintConfig.cpp:567 src/libslic3r/PrintConfig.cpp:576
-#: src/libslic3r/PrintConfig.cpp:585 src/libslic3r/PrintConfig.cpp:594
-#: src/libslic3r/PrintConfig.cpp:871 src/libslic3r/PrintConfig.cpp:1426
-#: src/libslic3r/PrintConfig.cpp:1629 src/libslic3r/PrintConfig.cpp:1720
-#: src/libslic3r/PrintConfig.cpp:2114 src/libslic3r/PrintConfig.cpp:2448
-#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:3103
-#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1569
+#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:585
+#: src/libslic3r/PrintConfig.cpp:598 src/libslic3r/PrintConfig.cpp:607
+#: src/libslic3r/PrintConfig.cpp:616 src/libslic3r/PrintConfig.cpp:625
+#: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:1457
+#: src/libslic3r/PrintConfig.cpp:1666 src/libslic3r/PrintConfig.cpp:1757
+#: src/libslic3r/PrintConfig.cpp:2151 src/libslic3r/PrintConfig.cpp:2485
+#: src/libslic3r/PrintConfig.cpp:2538 src/libslic3r/PrintConfig.cpp:3128
+#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1577
 msgid "Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:545
+#: src/libslic3r/PrintConfig.cpp:576
 msgid "Speed for printing bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:546 src/libslic3r/PrintConfig.cpp:1028
-#: src/libslic3r/PrintConfig.cpp:1036 src/libslic3r/PrintConfig.cpp:1045
-#: src/libslic3r/PrintConfig.cpp:1053 src/libslic3r/PrintConfig.cpp:1080
-#: src/libslic3r/PrintConfig.cpp:1099 src/libslic3r/PrintConfig.cpp:1429
-#: src/libslic3r/PrintConfig.cpp:1631 src/libslic3r/PrintConfig.cpp:1722
-#: src/libslic3r/PrintConfig.cpp:1796 src/libslic3r/PrintConfig.cpp:1830
-#: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:1852
-#: src/libslic3r/PrintConfig.cpp:1914 src/libslic3r/PrintConfig.cpp:1973
-#: src/libslic3r/PrintConfig.cpp:2116 src/libslic3r/PrintConfig.cpp:2343
-#: src/libslic3r/PrintConfig.cpp:2352 src/libslic3r/PrintConfig.cpp:2886
-#: src/libslic3r/PrintConfig.cpp:3138 src/libslic3r/PrintConfig.cpp:3148
+#: src/libslic3r/PrintConfig.cpp:577 src/libslic3r/PrintConfig.cpp:1059
+#: src/libslic3r/PrintConfig.cpp:1067 src/libslic3r/PrintConfig.cpp:1076
+#: src/libslic3r/PrintConfig.cpp:1084 src/libslic3r/PrintConfig.cpp:1111
+#: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:1460
+#: src/libslic3r/PrintConfig.cpp:1668 src/libslic3r/PrintConfig.cpp:1759
+#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:1867
+#: src/libslic3r/PrintConfig.cpp:1879 src/libslic3r/PrintConfig.cpp:1889
+#: src/libslic3r/PrintConfig.cpp:1951 src/libslic3r/PrintConfig.cpp:2010
+#: src/libslic3r/PrintConfig.cpp:2153 src/libslic3r/PrintConfig.cpp:2380
+#: src/libslic3r/PrintConfig.cpp:2389 src/libslic3r/PrintConfig.cpp:2923
+#: src/libslic3r/PrintConfig.cpp:3163 src/libslic3r/PrintConfig.cpp:3173
 msgid "mm/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:553
+#: src/libslic3r/PrintConfig.cpp:584
 msgid "Enable dynamic overhang speeds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:555
+#: src/libslic3r/PrintConfig.cpp:586
 msgid "This setting enables dynamic speed control on overhangs."
 msgstr ""
 
 #. TRN PrintSettings : "Dynamic overhang speed"
-#: src/libslic3r/PrintConfig.cpp:560
+#: src/libslic3r/PrintConfig.cpp:591
 msgid ""
 "Overhang size is expressed as a percentage of overlap of the extrusion with "
 "the previous layer: 100% would be full overlap (no overhang), while 0% "
@@ -1192,41 +1225,41 @@ msgid ""
 "percentage, the speed is calculated over the external perimeter speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:613
+#: src/libslic3r/PrintConfig.cpp:597 src/libslic3r/PrintConfig.cpp:644
 msgid "speed for 0% overlap (bridge)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:569 src/libslic3r/PrintConfig.cpp:578
-#: src/libslic3r/PrintConfig.cpp:587 src/libslic3r/PrintConfig.cpp:596
-#: src/libslic3r/PrintConfig.cpp:875 src/libslic3r/PrintConfig.cpp:1348
-#: src/libslic3r/PrintConfig.cpp:1359 src/libslic3r/PrintConfig.cpp:2452
-#: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2841
-#: src/libslic3r/PrintConfig.cpp:3109
+#: src/libslic3r/PrintConfig.cpp:600 src/libslic3r/PrintConfig.cpp:609
+#: src/libslic3r/PrintConfig.cpp:618 src/libslic3r/PrintConfig.cpp:627
+#: src/libslic3r/PrintConfig.cpp:906 src/libslic3r/PrintConfig.cpp:1379
+#: src/libslic3r/PrintConfig.cpp:1390 src/libslic3r/PrintConfig.cpp:2489
+#: src/libslic3r/PrintConfig.cpp:2542 src/libslic3r/PrintConfig.cpp:2878
+#: src/libslic3r/PrintConfig.cpp:3134
 msgid "mm/s or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:622
+#: src/libslic3r/PrintConfig.cpp:606 src/libslic3r/PrintConfig.cpp:653
 msgid "speed for 25% overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:584 src/libslic3r/PrintConfig.cpp:631
+#: src/libslic3r/PrintConfig.cpp:615 src/libslic3r/PrintConfig.cpp:662
 msgid "speed for 50% overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:593 src/libslic3r/PrintConfig.cpp:640
+#: src/libslic3r/PrintConfig.cpp:624 src/libslic3r/PrintConfig.cpp:671
 msgid "speed for 75% overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:602
+#: src/libslic3r/PrintConfig.cpp:633
 msgid "Enable dynamic fan speeds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:603
+#: src/libslic3r/PrintConfig.cpp:634
 msgid "This setting enables dynamic fan speed control on overhangs."
 msgstr ""
 
 #. TRN FilamentSettings : "Dynamic fan speeds"
-#: src/libslic3r/PrintConfig.cpp:608
+#: src/libslic3r/PrintConfig.cpp:639
 msgid ""
 "Overhang size is expressed as a percentage of overlap of the extrusion with "
 "the previous layer: 100% would be full overlap (no overhang), while 0% "
@@ -1234,102 +1267,102 @@ msgid ""
 "overhang sizes in between are calculated via linear interpolation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:649
+#: src/libslic3r/PrintConfig.cpp:680
 msgid "Brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:650 src/libslic3r/PrintConfig.cpp:661
-#: src/libslic3r/PrintConfig.cpp:674 src/slic3r/GUI/GUI_Factories.cpp:140
-#: src/slic3r/GUI/Tab.cpp:1511
+#: src/libslic3r/PrintConfig.cpp:681 src/libslic3r/PrintConfig.cpp:692
+#: src/libslic3r/PrintConfig.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:140
+#: src/slic3r/GUI/Tab.cpp:1519
 msgid "Skirt and brim"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:651
+#: src/libslic3r/PrintConfig.cpp:682
 msgid ""
 "The horizontal width of the brim that will be printed around each object on "
 "the first layer. When raft is used, no brim is generated (use "
 "raft_first_layer_expansion)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:660
+#: src/libslic3r/PrintConfig.cpp:691
 msgid "Brim type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:662
+#: src/libslic3r/PrintConfig.cpp:693
 msgid ""
 "The places where the brim will be printed around each object on the first "
 "layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:664
+#: src/libslic3r/PrintConfig.cpp:695
 msgid "No brim"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:665
+#: src/libslic3r/PrintConfig.cpp:696
 msgid "Outer brim only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:666
+#: src/libslic3r/PrintConfig.cpp:697
 msgid "Inner brim only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:667
+#: src/libslic3r/PrintConfig.cpp:698
 msgid "Outer and inner brim"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:673
+#: src/libslic3r/PrintConfig.cpp:704
 msgid "Brim separation gap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:675
+#: src/libslic3r/PrintConfig.cpp:706
 msgid ""
 "Offset of brim from the printed object. The offset is applied after the "
 "elephant foot compensation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:682
+#: src/libslic3r/PrintConfig.cpp:713
 msgid "Colorprint height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:683
+#: src/libslic3r/PrintConfig.cpp:714
 msgid "Heights at which a filament change is to occur."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:687 src/slic3r/GUI/Tab.cpp:88
+#: src/libslic3r/PrintConfig.cpp:718 src/slic3r/GUI/Tab.cpp:90
 msgid "Compatible printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:693
+#: src/libslic3r/PrintConfig.cpp:724
 msgid "Compatible printers condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:694
+#: src/libslic3r/PrintConfig.cpp:725
 msgid ""
 "A boolean expression using the configuration values of an active printer "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active printer profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:702 src/slic3r/GUI/Tab.cpp:94
+#: src/libslic3r/PrintConfig.cpp:733 src/slic3r/GUI/Tab.cpp:96
 msgid "Compatible print profiles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:708
+#: src/libslic3r/PrintConfig.cpp:739
 msgid "Compatible print profiles condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:709
+#: src/libslic3r/PrintConfig.cpp:740
 msgid ""
 "A boolean expression using the configuration values of an active print "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active print profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:726
+#: src/libslic3r/PrintConfig.cpp:757
 msgid "Complete individual objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:727
+#: src/libslic3r/PrintConfig.cpp:758
 msgid ""
 "When printing multiple objects or copies, this feature will complete each "
 "object before moving onto next one (and starting it from its bottom layer). "
@@ -1337,113 +1370,113 @@ msgid ""
 "warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:735
+#: src/libslic3r/PrintConfig.cpp:766
 msgid "Enable auto cooling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:736
+#: src/libslic3r/PrintConfig.cpp:767
 msgid ""
 "This flag enables the automatic cooling logic that adjusts print speed and "
 "fan speed according to layer printing time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:741
+#: src/libslic3r/PrintConfig.cpp:772
 msgid "Cooling tube position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:742
+#: src/libslic3r/PrintConfig.cpp:773
 msgid "Distance of the center-point of the cooling tube from the extruder tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:749
+#: src/libslic3r/PrintConfig.cpp:780
 msgid "Cooling tube length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:750
+#: src/libslic3r/PrintConfig.cpp:781
 msgid "Length of the cooling tube to limit space for cooling moves inside it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:757 src/libslic3r/PrintConfig.cpp:2866
-#: src/libslic3r/PrintConfig.cpp:4007 src/slic3r/GUI/GUI_Factories.cpp:874
-#: src/slic3r/GUI/Tab.cpp:5267 src/slic3r/Utils/Repetier.cpp:149
+#: src/libslic3r/PrintConfig.cpp:788 src/libslic3r/PrintConfig.cpp:2903
+#: src/libslic3r/PrintConfig.cpp:4032 src/slic3r/GUI/GUI_Factories.cpp:874
+#: src/slic3r/GUI/Tab.cpp:5406 src/slic3r/Utils/Repetier.cpp:149
 #: src/slic3r/Utils/Repetier.cpp:230
 msgid "Default"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:758
+#: src/libslic3r/PrintConfig.cpp:789
 msgid ""
 "This is the acceleration your printer will be reset to after the role-"
 "specific acceleration values are used (perimeter/infill). Set zero to "
 "prevent resetting acceleration at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:767
+#: src/libslic3r/PrintConfig.cpp:798
 msgid "Default filament profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:768
+#: src/libslic3r/PrintConfig.cpp:799
 msgid ""
 "Default filament profile associated with the current printer profile. On "
 "selection of the current printer profile, this filament profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:774
+#: src/libslic3r/PrintConfig.cpp:805
 msgid "Default print profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:775 src/libslic3r/PrintConfig.cpp:3975
-#: src/libslic3r/PrintConfig.cpp:3986
+#: src/libslic3r/PrintConfig.cpp:806 src/libslic3r/PrintConfig.cpp:4000
+#: src/libslic3r/PrintConfig.cpp:4011
 msgid ""
 "Default print profile associated with the current printer profile. On "
 "selection of the current printer profile, this print profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:781
+#: src/libslic3r/PrintConfig.cpp:812
 msgid "Disable fan for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:782
+#: src/libslic3r/PrintConfig.cpp:813
 msgid ""
 "You can set this to a positive value to disable fan at all during the first "
 "layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:784 src/libslic3r/PrintConfig.cpp:1528
-#: src/libslic3r/PrintConfig.cpp:2229 src/libslic3r/PrintConfig.cpp:2408
-#: src/libslic3r/PrintConfig.cpp:2482 src/libslic3r/PrintConfig.cpp:2741
-#: src/libslic3r/PrintConfig.cpp:2788 src/libslic3r/PrintConfig.cpp:2804
-#: src/libslic3r/PrintConfig.cpp:3310
+#: src/libslic3r/PrintConfig.cpp:815 src/libslic3r/PrintConfig.cpp:1565
+#: src/libslic3r/PrintConfig.cpp:2266 src/libslic3r/PrintConfig.cpp:2445
+#: src/libslic3r/PrintConfig.cpp:2519 src/libslic3r/PrintConfig.cpp:2778
+#: src/libslic3r/PrintConfig.cpp:2825 src/libslic3r/PrintConfig.cpp:2841
+#: src/libslic3r/PrintConfig.cpp:3335
 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:64
 msgid "layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:791
+#: src/libslic3r/PrintConfig.cpp:822
 msgid "Don't support bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:793
+#: src/libslic3r/PrintConfig.cpp:824
 msgid ""
 "Experimental option for preventing support material from being generated "
 "under bridged areas."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:799
+#: src/libslic3r/PrintConfig.cpp:830
 msgid "Distance between copies"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:800
+#: src/libslic3r/PrintConfig.cpp:831
 msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:808
+#: src/libslic3r/PrintConfig.cpp:839
 msgid ""
 "This end procedure is inserted at the end of the output file. Note that you "
 "can use placeholder variables for all PrusaSlicer settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:818
+#: src/libslic3r/PrintConfig.cpp:849
 msgid ""
 "This end procedure is inserted at the end of the output file, before the "
 "printer end gcode (and before any toolchange from this filament in case of "
@@ -1452,74 +1485,74 @@ msgid ""
 "in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:829
+#: src/libslic3r/PrintConfig.cpp:860
 msgid "Top fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:831
+#: src/libslic3r/PrintConfig.cpp:862
 msgid ""
 "Fill pattern for top infill. This only affects the top visible layer, and "
 "not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:834 src/libslic3r/PrintConfig.cpp:1271
-#: src/libslic3r/PrintConfig.cpp:2852 src/libslic3r/PrintConfig.cpp:2867
+#: src/libslic3r/PrintConfig.cpp:865 src/libslic3r/PrintConfig.cpp:1302
+#: src/libslic3r/PrintConfig.cpp:2889 src/libslic3r/PrintConfig.cpp:2904
 msgid "Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:835
+#: src/libslic3r/PrintConfig.cpp:866
 msgid "Monotonic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:836
+#: src/libslic3r/PrintConfig.cpp:867
 msgid "Monotonic Lines"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:1272
+#: src/libslic3r/PrintConfig.cpp:868 src/libslic3r/PrintConfig.cpp:1303
 msgid "Aligned Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:1278
-#: src/libslic3r/PrintConfig.cpp:2868
+#: src/libslic3r/PrintConfig.cpp:869 src/libslic3r/PrintConfig.cpp:1309
+#: src/libslic3r/PrintConfig.cpp:2905
 msgid "Concentric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:839 src/libslic3r/PrintConfig.cpp:1282
+#: src/libslic3r/PrintConfig.cpp:870 src/libslic3r/PrintConfig.cpp:1313
 msgid "Hilbert Curve"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:840 src/libslic3r/PrintConfig.cpp:1283
+#: src/libslic3r/PrintConfig.cpp:871 src/libslic3r/PrintConfig.cpp:1314
 msgid "Archimedean Chords"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:841 src/libslic3r/PrintConfig.cpp:1284
+#: src/libslic3r/PrintConfig.cpp:872 src/libslic3r/PrintConfig.cpp:1315
 msgid "Octagram Spiral"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:849
+#: src/libslic3r/PrintConfig.cpp:880
 msgid "Bottom fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:851
+#: src/libslic3r/PrintConfig.cpp:882
 msgid ""
 "Fill pattern for bottom infill. This only affects the bottom external "
 "visible layer, and not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:858 src/libslic3r/PrintConfig.cpp:870
-#: src/libslic3r/PrintConfig.cpp:2082
+#: src/libslic3r/PrintConfig.cpp:889 src/libslic3r/PrintConfig.cpp:901
+#: src/libslic3r/PrintConfig.cpp:2119
 msgid "External perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:859 src/libslic3r/PrintConfig.cpp:972
-#: src/libslic3r/PrintConfig.cpp:1321 src/libslic3r/PrintConfig.cpp:1590
-#: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2489
-#: src/libslic3r/PrintConfig.cpp:2758 src/libslic3r/PrintConfig.cpp:3090
+#: src/libslic3r/PrintConfig.cpp:890 src/libslic3r/PrintConfig.cpp:1003
+#: src/libslic3r/PrintConfig.cpp:1352 src/libslic3r/PrintConfig.cpp:1627
+#: src/libslic3r/PrintConfig.cpp:2137 src/libslic3r/PrintConfig.cpp:2526
+#: src/libslic3r/PrintConfig.cpp:2795 src/libslic3r/PrintConfig.cpp:3115
 #: src/slic3r/GUI/GUI_Factories.cpp:138
 msgid "Extrusion Width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:860
+#: src/libslic3r/PrintConfig.cpp:891
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for external "
 "perimeters. If left zero, default extrusion width will be used if set, "
@@ -1527,80 +1560,69 @@ msgid ""
 "(for example 200%), it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:863 src/libslic3r/PrintConfig.cpp:977
-#: src/libslic3r/PrintConfig.cpp:1326 src/libslic3r/PrintConfig.cpp:1543
-#: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:1622
-#: src/libslic3r/PrintConfig.cpp:2105 src/libslic3r/PrintConfig.cpp:2493
-#: src/libslic3r/PrintConfig.cpp:2677 src/libslic3r/PrintConfig.cpp:2762
-#: src/libslic3r/PrintConfig.cpp:3095 src/libslic3r/PrintConfig.cpp:3355
-#: src/libslic3r/PrintConfig.cpp:3370 src/libslic3r/PrintConfig.cpp:3404
-#: src/libslic3r/PrintConfig.cpp:3416
-msgid "mm or %"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:872
+#: src/libslic3r/PrintConfig.cpp:903
 msgid ""
 "This separate setting will affect the speed of external perimeters (the "
 "visible ones). If expressed as percentage (for example: 80%) it will be "
 "calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:882
+#: src/libslic3r/PrintConfig.cpp:913
 msgid "External perimeters first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:884
+#: src/libslic3r/PrintConfig.cpp:915
 msgid ""
 "Print contour perimeters from the outermost one to the innermost one instead "
 "of the default inverse order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:890
+#: src/libslic3r/PrintConfig.cpp:921
 msgid "Extra perimeters if needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:892
+#: src/libslic3r/PrintConfig.cpp:923
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
 "keeps adding perimeters, until more than 70% of the loop immediately above "
 "is supported."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:899
+#: src/libslic3r/PrintConfig.cpp:930
 msgid "Extra perimeters on overhangs (Experimental)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:901
+#: src/libslic3r/PrintConfig.cpp:932
 msgid ""
 "Detect overhang areas where bridges cannot be anchored, and fill them with "
 "extra perimeter paths. These paths are anchored to the nearby non-overhang "
 "area when possible."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:907 src/slic3r/GUI/GCodeViewer.cpp:3716
-#: src/slic3r/GUI/GCodeViewer.cpp:3761 src/slic3r/GUI/GCodeViewer.cpp:3765
+#: src/libslic3r/PrintConfig.cpp:938 src/slic3r/GUI/GCodeViewer.cpp:3824
+#: src/slic3r/GUI/GCodeViewer.cpp:3869 src/slic3r/GUI/GCodeViewer.cpp:3873
 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:79
-#: src/slic3r/GUI/GUI_ObjectList.cpp:355 src/slic3r/GUI/Tab.cpp:2005
+#: src/slic3r/GUI/GUI_ObjectList.cpp:355 src/slic3r/GUI/Tab.cpp:2080
 #: src/slic3r/GUI/wxExtensions.cpp:515
 msgid "Extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:908 src/libslic3r/PrintConfig.cpp:1582
-#: src/libslic3r/PrintConfig.cpp:2091 src/libslic3r/PrintConfig.cpp:2469
-#: src/libslic3r/PrintConfig.cpp:2749 src/libslic3r/PrintConfig.cpp:2777
-#: src/libslic3r/PrintConfig.cpp:3296 src/slic3r/GUI/GUI_Factories.cpp:137
-#: src/slic3r/GUI/Tab.cpp:1619 src/slic3r/GUI/Tab.cpp:2500
+#: src/libslic3r/PrintConfig.cpp:939 src/libslic3r/PrintConfig.cpp:1619
+#: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2506
+#: src/libslic3r/PrintConfig.cpp:2786 src/libslic3r/PrintConfig.cpp:2814
+#: src/libslic3r/PrintConfig.cpp:3321 src/slic3r/GUI/GUI_Factories.cpp:137
+#: src/slic3r/GUI/Tab.cpp:1627 src/slic3r/GUI/Tab.cpp:2577
 msgid "Extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:909
+#: src/libslic3r/PrintConfig.cpp:940
 msgid ""
 "The extruder to use (unless more specific extruder settings are specified). "
 "This value overrides perimeter and infill extruders, but not the support "
 "extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:913 src/slic3r/GUI/ExtraRenderers.cpp:327
+#: src/libslic3r/PrintConfig.cpp:944 src/slic3r/GUI/ExtraRenderers.cpp:327
 #: src/slic3r/GUI/GUI_ObjectList.cpp:588 src/slic3r/GUI/GUI_ObjectList.cpp:600
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1070
 #: src/slic3r/GUI/GUI_ObjectList.cpp:2139
@@ -1610,12 +1632,12 @@ msgstr ""
 msgid "default"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:916
+#: src/libslic3r/PrintConfig.cpp:947
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1016
 msgid "Height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:917
+#: src/libslic3r/PrintConfig.cpp:948
 msgid ""
 "Set this to the vertical distance between your nozzle tip and (usually) the "
 "X carriage rods. In other words, this is the height of the clearance "
@@ -1623,31 +1645,31 @@ msgid ""
 "extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:927 src/slic3r/GUI/GLCanvas3D.cpp:248
+#: src/libslic3r/PrintConfig.cpp:958 src/slic3r/GUI/GLCanvas3D.cpp:248
 msgid "Radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:928
+#: src/libslic3r/PrintConfig.cpp:959
 msgid ""
 "Set this to the clearance radius around your extruder. If the extruder is "
 "not centered, choose the largest value for safety. This setting is used to "
 "check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:938
+#: src/libslic3r/PrintConfig.cpp:969
 msgid "Extruder Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:939 src/libslic3r/PrintConfig.cpp:1002
-#: src/libslic3r/PrintConfig.cpp:3820
+#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1033
+#: src/libslic3r/PrintConfig.cpp:3845
 msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:945
+#: src/libslic3r/PrintConfig.cpp:976
 msgid "Extruder offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:946
+#: src/libslic3r/PrintConfig.cpp:977
 msgid ""
 "If your firmware doesn't handle the extruder displacement you need the G-"
 "code to take it into account. This option lets you specify the displacement "
@@ -1655,21 +1677,21 @@ msgid ""
 "coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:955
+#: src/libslic3r/PrintConfig.cpp:986
 msgid "Extrusion axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:956
+#: src/libslic3r/PrintConfig.cpp:987
 msgid ""
 "Use this option to set the axis letter associated to your printer's extruder "
 "(usually E but some printers use A)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:961
+#: src/libslic3r/PrintConfig.cpp:992
 msgid "Extrusion multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:962
+#: src/libslic3r/PrintConfig.cpp:993
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -1677,11 +1699,11 @@ msgid ""
 "more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:971
+#: src/libslic3r/PrintConfig.cpp:1002
 msgid "Default extrusion width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:973
+#: src/libslic3r/PrintConfig.cpp:1004
 msgid ""
 "Set this to a non-zero value to allow a manual extrusion width. If left to "
 "zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
@@ -1690,138 +1712,138 @@ msgid ""
 "height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:985
+#: src/libslic3r/PrintConfig.cpp:1016
 msgid "Keep fan always on"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:986
+#: src/libslic3r/PrintConfig.cpp:1017
 msgid ""
 "If this is enabled, fan will never be disabled and will be kept running at "
 "least at its minimum speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:991
+#: src/libslic3r/PrintConfig.cpp:1022
 msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:992
+#: src/libslic3r/PrintConfig.cpp:1023
 msgid ""
 "If layer print time is estimated below this number of seconds, fan will be "
 "enabled and its speed will be calculated by interpolating the minimum and "
 "maximum speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:994 src/libslic3r/PrintConfig.cpp:2440
+#: src/libslic3r/PrintConfig.cpp:1025 src/libslic3r/PrintConfig.cpp:2477
 msgid "approximate seconds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1001 src/libslic3r/PrintConfig.cpp:3819
+#: src/libslic3r/PrintConfig.cpp:1032 src/libslic3r/PrintConfig.cpp:3844
 msgid "Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1007
+#: src/libslic3r/PrintConfig.cpp:1038
 msgid "Filament notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1008
+#: src/libslic3r/PrintConfig.cpp:1039
 msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1016 src/libslic3r/PrintConfig.cpp:1920
+#: src/libslic3r/PrintConfig.cpp:1047 src/libslic3r/PrintConfig.cpp:1957
 msgid "Max volumetric speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1017
+#: src/libslic3r/PrintConfig.cpp:1048
 msgid ""
 "Maximum volumetric speed allowed for this filament. Limits the maximum "
 "volumetric speed of a print to the minimum of print and filament volumetric "
 "speed. Set to zero for no limit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1020 src/libslic3r/PrintConfig.cpp:1146
-#: src/libslic3r/PrintConfig.cpp:1923 src/slic3r/GUI/RammingChart.cpp:99
+#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:1177
+#: src/libslic3r/PrintConfig.cpp:1960 src/slic3r/GUI/RammingChart.cpp:99
 msgid "mm³/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1026
+#: src/libslic3r/PrintConfig.cpp:1057
 msgid "Loading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1027
+#: src/libslic3r/PrintConfig.cpp:1058
 msgid "Speed used for loading the filament on the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1034
+#: src/libslic3r/PrintConfig.cpp:1065
 msgid "Loading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1035
+#: src/libslic3r/PrintConfig.cpp:1066
 msgid "Speed used at the very beginning of loading phase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1042
+#: src/libslic3r/PrintConfig.cpp:1073
 msgid "Unloading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1043
+#: src/libslic3r/PrintConfig.cpp:1074
 msgid ""
 "Speed used for unloading the filament on the wipe tower (does not affect  "
 "initial part of unloading just after ramming)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1051
+#: src/libslic3r/PrintConfig.cpp:1082
 msgid "Unloading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1052
+#: src/libslic3r/PrintConfig.cpp:1083
 msgid ""
 "Speed used for unloading the tip of the filament immediately after ramming."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1059
+#: src/libslic3r/PrintConfig.cpp:1090
 msgid "Delay after unloading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1060
+#: src/libslic3r/PrintConfig.cpp:1091
 msgid ""
 "Time to wait after the filament is unloaded. May help to get reliable "
 "toolchanges with flexible materials that may need more time to shrink to "
 "original dimensions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1063 src/libslic3r/PrintConfig.cpp:1107
-#: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:3723
-#: src/libslic3r/PrintConfig.cpp:3732 src/libslic3r/PrintConfig.cpp:3741
-#: src/libslic3r/PrintConfig.cpp:3887 src/libslic3r/PrintConfig.cpp:3895
-#: src/libslic3r/PrintConfig.cpp:3903 src/libslic3r/PrintConfig.cpp:3910
-#: src/libslic3r/PrintConfig.cpp:3918 src/libslic3r/PrintConfig.cpp:3926
+#: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:1138
+#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:3748
+#: src/libslic3r/PrintConfig.cpp:3757 src/libslic3r/PrintConfig.cpp:3766
+#: src/libslic3r/PrintConfig.cpp:3912 src/libslic3r/PrintConfig.cpp:3920
+#: src/libslic3r/PrintConfig.cpp:3928 src/libslic3r/PrintConfig.cpp:3935
+#: src/libslic3r/PrintConfig.cpp:3943 src/libslic3r/PrintConfig.cpp:3951
 #: src/slic3r/GUI/RammingChart.cpp:94 src/slic3r/GUI/WipeTowerDialog.cpp:120
 msgid "s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1069
+#: src/libslic3r/PrintConfig.cpp:1100
 msgid "Number of cooling moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1070
+#: src/libslic3r/PrintConfig.cpp:1101
 msgid ""
 "Filament is cooled by being moved back and forth in the cooling tubes. "
 "Specify desired number of these moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1078
+#: src/libslic3r/PrintConfig.cpp:1109
 msgid "Speed of the first cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1079
+#: src/libslic3r/PrintConfig.cpp:1110
 msgid "Cooling moves are gradually accelerating beginning at this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1086
+#: src/libslic3r/PrintConfig.cpp:1117
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1087
+#: src/libslic3r/PrintConfig.cpp:1118
 msgid ""
 "After a tool change, the exact position of the newly loaded filament inside "
 "the nozzle may not be known, and the filament pressure is likely not yet "
@@ -1830,55 +1852,55 @@ msgid ""
 "to produce successive infill or sacrificial object extrusions reliably."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1091 src/libslic3r/PrintConfig.cpp:1138
+#: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:1169
 msgid "mm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1097
+#: src/libslic3r/PrintConfig.cpp:1128
 msgid "Speed of the last cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1098
+#: src/libslic3r/PrintConfig.cpp:1129
 msgid "Cooling moves are gradually accelerating towards this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1105
+#: src/libslic3r/PrintConfig.cpp:1136
 msgid "Filament load time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1106
+#: src/libslic3r/PrintConfig.cpp:1137
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1113
+#: src/libslic3r/PrintConfig.cpp:1144
 msgid "Ramming parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1114
+#: src/libslic3r/PrintConfig.cpp:1145
 msgid ""
 "This string is edited by RammingDialog and contains ramming specific "
 "parameters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1120
+#: src/libslic3r/PrintConfig.cpp:1151
 msgid "Filament unload time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1121
+#: src/libslic3r/PrintConfig.cpp:1152
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1128
+#: src/libslic3r/PrintConfig.cpp:1159
 msgid "Enable ramming for multitool setups"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1129
+#: src/libslic3r/PrintConfig.cpp:1160
 msgid ""
 "Perform ramming when using multitool printer (i.e. when the 'Single Extruder "
 "Multimaterial' in Printer Settings is unchecked). When checked, a small "
@@ -1886,40 +1908,40 @@ msgid ""
 "toolchange. This option is only used when the wipe tower is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1136
+#: src/libslic3r/PrintConfig.cpp:1167
 msgid "Multitool ramming volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1137
+#: src/libslic3r/PrintConfig.cpp:1168
 msgid "The volume to be rammed before the toolchange."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1144
+#: src/libslic3r/PrintConfig.cpp:1175
 msgid "Multitool ramming flow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1145
+#: src/libslic3r/PrintConfig.cpp:1176
 msgid "Flow used for ramming the filament before the toolchange."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1152 src/slic3r/GUI/BedShapeDialog.cpp:43
+#: src/libslic3r/PrintConfig.cpp:1183 src/slic3r/GUI/BedShapeDialog.cpp:43
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2009
 msgid "Diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1153
+#: src/libslic3r/PrintConfig.cpp:1184
 msgid ""
 "Enter your filament diameter here. Good precision is required, so use a "
 "caliper and do multiple measurements along the filament, then compute the "
 "average."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1160 src/libslic3r/PrintConfig.cpp:3863
-#: src/libslic3r/PrintConfig.cpp:3864
+#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:3888
+#: src/libslic3r/PrintConfig.cpp:3889
 msgid "Density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1161
+#: src/libslic3r/PrintConfig.cpp:1192
 msgid ""
 "Enter your filament density here. This is only for statistical information. "
 "A decent way is to weigh a known length of filament and compute the ratio of "
@@ -1927,46 +1949,46 @@ msgid ""
 "displacement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1164
+#: src/libslic3r/PrintConfig.cpp:1195
 msgid "g/cm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1169
+#: src/libslic3r/PrintConfig.cpp:1200
 msgid "Filament type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1170
+#: src/libslic3r/PrintConfig.cpp:1201
 msgid "The filament material type for use in custom G-codes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1198
+#: src/libslic3r/PrintConfig.cpp:1229
 msgid "Soluble material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1199
+#: src/libslic3r/PrintConfig.cpp:1230
 msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1204 src/libslic3r/PrintConfig.cpp:3870
-#: src/libslic3r/PrintConfig.cpp:3871 src/slic3r/GUI/Plater.cpp:1464
+#: src/libslic3r/PrintConfig.cpp:1235 src/libslic3r/PrintConfig.cpp:3895
+#: src/libslic3r/PrintConfig.cpp:3896 src/slic3r/GUI/Plater.cpp:1467
 msgid "Cost"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1205
+#: src/libslic3r/PrintConfig.cpp:1236
 msgid ""
 "Enter your filament cost per kg here. This is only for statistical "
 "information."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1206
+#: src/libslic3r/PrintConfig.cpp:1237
 msgid "money/kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1211
+#: src/libslic3r/PrintConfig.cpp:1242
 msgid "Spool weight"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1212
+#: src/libslic3r/PrintConfig.cpp:1243
 msgid ""
 "Enter weight of the empty filament spool. One may weigh a partially consumed "
 "filament spool before printing and one may compare the measured weight with "
@@ -1974,122 +1996,122 @@ msgid ""
 "amount of filament on the spool is sufficient to finish the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1216 src/slic3r/GUI/GCodeViewer.cpp:3342
+#: src/libslic3r/PrintConfig.cpp:1247 src/slic3r/GUI/GCodeViewer.cpp:3442
 msgid "g"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1225 src/libslic3r/PrintConfig.cpp:3970
+#: src/libslic3r/PrintConfig.cpp:1256 src/libslic3r/PrintConfig.cpp:3995
 msgid "(Unknown)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1229
+#: src/libslic3r/PrintConfig.cpp:1260
 msgid "Fill angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1231
+#: src/libslic3r/PrintConfig.cpp:1262
 msgid ""
 "Default base angle for infill orientation. Cross-hatching will be applied to "
 "this. Bridges will be infilled using the best direction Slic3r can detect, "
 "so this setting does not affect them."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1242
+#: src/libslic3r/PrintConfig.cpp:1273
 msgid "Fill density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1244
+#: src/libslic3r/PrintConfig.cpp:1275
 msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1267
+#: src/libslic3r/PrintConfig.cpp:1298
 msgid "Fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1269
+#: src/libslic3r/PrintConfig.cpp:1300
 msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1273 src/libslic3r/PrintConfig.cpp:2898
+#: src/libslic3r/PrintConfig.cpp:1304 src/libslic3r/PrintConfig.cpp:2935
 msgid "Grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1274
+#: src/libslic3r/PrintConfig.cpp:1305
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:110
 msgid "Triangles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1275
+#: src/libslic3r/PrintConfig.cpp:1306
 msgid "Stars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1276
+#: src/libslic3r/PrintConfig.cpp:1307
 msgid "Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1277
+#: src/libslic3r/PrintConfig.cpp:1308
 msgid "Line"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1279 src/libslic3r/PrintConfig.cpp:2854
+#: src/libslic3r/PrintConfig.cpp:1310 src/libslic3r/PrintConfig.cpp:2891
 msgid "Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1280
+#: src/libslic3r/PrintConfig.cpp:1311
 msgid "3D Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1281
+#: src/libslic3r/PrintConfig.cpp:1312
 msgid "Gyroid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1285
+#: src/libslic3r/PrintConfig.cpp:1316
 msgid "Adaptive Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1286
+#: src/libslic3r/PrintConfig.cpp:1317
 msgid "Support Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1287
+#: src/libslic3r/PrintConfig.cpp:1318
 msgid "Lightning"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1292 src/libslic3r/PrintConfig.cpp:1310
-#: src/libslic3r/PrintConfig.cpp:1320 src/libslic3r/PrintConfig.cpp:1365
-#: src/slic3r/GUI/GCodeViewer.cpp:4069
+#: src/libslic3r/PrintConfig.cpp:1323 src/libslic3r/PrintConfig.cpp:1341
+#: src/libslic3r/PrintConfig.cpp:1351 src/libslic3r/PrintConfig.cpp:1396
+#: src/slic3r/GUI/GCodeViewer.cpp:4177
 msgid "First layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1293
+#: src/libslic3r/PrintConfig.cpp:1324
 msgid ""
 "This is the acceleration your printer will use for first layer. Set zero to "
 "disable acceleration control for first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1301
+#: src/libslic3r/PrintConfig.cpp:1332
 msgid "First object layer over raft interface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1302
+#: src/libslic3r/PrintConfig.cpp:1333
 msgid ""
 "This is the acceleration your printer will use for first layer of object "
 "above raft interface. Set zero to disable acceleration control for first "
 "layer of object above raft interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1311
+#: src/libslic3r/PrintConfig.cpp:1342
 msgid "First layer bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1312
+#: src/libslic3r/PrintConfig.cpp:1343
 msgid ""
 "Heated build plate temperature for the first layer. Set this to zero to "
 "disable bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1322
+#: src/libslic3r/PrintConfig.cpp:1353
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for first "
 "layer. You can use this to force fatter extrudates for better adhesion. If "
@@ -2097,33 +2119,33 @@ msgid ""
 "layer height. If set to zero, it will use the default extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1334 src/slic3r/GUI/ConfigManipulation.cpp:67
+#: src/libslic3r/PrintConfig.cpp:1365 src/slic3r/GUI/ConfigManipulation.cpp:67
 msgid "First layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1336
+#: src/libslic3r/PrintConfig.cpp:1367
 msgid ""
 "When printing with very low layer heights, you might still want to print a "
 "thicker bottom layer to improve adhesion and tolerance for non perfect build "
 "plates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1344
+#: src/libslic3r/PrintConfig.cpp:1375
 msgid "First layer speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1345
+#: src/libslic3r/PrintConfig.cpp:1376
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
 "the print moves of the first layer, regardless of their type. If expressed "
 "as a percentage (for example: 40%) it will scale the default speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1355
+#: src/libslic3r/PrintConfig.cpp:1386
 msgid "Speed of object first layer over raft interface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1356
+#: src/libslic3r/PrintConfig.cpp:1387
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
 "the print moves of the first object layer above raft interface, regardless "
@@ -2131,22 +2153,22 @@ msgid ""
 "the default speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1366
+#: src/libslic3r/PrintConfig.cpp:1397
 msgid "First layer nozzle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1367
+#: src/libslic3r/PrintConfig.cpp:1398
 msgid ""
 "Nozzle temperature for the first layer. If you want to control temperature "
 "manually during print, set this to zero to disable temperature control "
 "commands in the output G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1375
+#: src/libslic3r/PrintConfig.cpp:1406
 msgid "Full fan speed at layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1376
+#: src/libslic3r/PrintConfig.cpp:1407
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
 "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
@@ -2155,87 +2177,87 @@ msgid ""
 "maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1386 src/libslic3r/PrintConfig.cpp:1387
-#: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1409
+#: src/libslic3r/PrintConfig.cpp:1417 src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1440
 #: src/slic3r/GUI/GUI_Factories.cpp:134
 msgid "Fuzzy Skin"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1388
+#: src/libslic3r/PrintConfig.cpp:1419
 msgid "Fuzzy skin type."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1390 src/slic3r/GUI/ConfigWizard.cpp:416
+#: src/libslic3r/PrintConfig.cpp:1421 src/slic3r/GUI/ConfigWizard.cpp:416
 #: src/slic3r/GUI/ConfigWizard.cpp:741 src/slic3r/GUI/DoubleSlider.cpp:2103
 #: src/slic3r/GUI/FileArchiveDialog.cpp:272
 #: src/slic3r/GUI/FileArchiveDialog.cpp:290
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1999 src/slic3r/GUI/Plater.cpp:463
-#: src/slic3r/GUI/Plater.cpp:618 src/slic3r/GUI/Preferences.cpp:537
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1999 src/slic3r/GUI/Plater.cpp:466
+#: src/slic3r/GUI/Plater.cpp:621 src/slic3r/GUI/Preferences.cpp:537
 msgid "None"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1391
+#: src/libslic3r/PrintConfig.cpp:1422
 msgid "Outside walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1392
+#: src/libslic3r/PrintConfig.cpp:1423
 msgid "All walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1398
+#: src/libslic3r/PrintConfig.cpp:1429
 msgid "Fuzzy skin thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1400
+#: src/libslic3r/PrintConfig.cpp:1431
 msgid ""
 "The maximum distance that each skin point can be offset (both ways), "
 "measured perpendicular to the perimeter wall."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1439
 msgid "Fuzzy skin point distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1410
+#: src/libslic3r/PrintConfig.cpp:1441
 msgid ""
 "Perimeters will be split into multiple segments by inserting Fuzzy skin "
 "points. Lowering the Fuzzy skin point distance will increase the number of "
 "randomly offset points on the perimeter wall."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1449
 msgid "Fill gaps"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1420
+#: src/libslic3r/PrintConfig.cpp:1451
 msgid ""
 "Enables filling of gaps between perimeters and between the inner most "
 "perimeters and infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1427
+#: src/libslic3r/PrintConfig.cpp:1458
 msgid ""
 "Speed for filling small gaps using short zigzag moves. Keep this reasonably "
 "low to avoid too much shaking and resonance issues. Set zero to disable gaps "
 "filling."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1435
+#: src/libslic3r/PrintConfig.cpp:1466
 msgid "Verbose G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1436
+#: src/libslic3r/PrintConfig.cpp:1467
 msgid ""
 "Enable this to get a commented G-code file, with each line explained by a "
 "descriptive text. If you print from SD card, the additional weight of the "
 "file could make your firmware slow down."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1443
+#: src/libslic3r/PrintConfig.cpp:1474
 msgid "G-code flavor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1444
+#: src/libslic3r/PrintConfig.cpp:1475
 msgid ""
 "Some G/M-code commands, including temperature control and others, are not "
 "universal. Set this option to your printer's firmware to get a compatible "
@@ -2243,15 +2265,15 @@ msgid ""
 "extrusion value at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1460
+#: src/libslic3r/PrintConfig.cpp:1491
 msgid "No extrusion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1466
+#: src/libslic3r/PrintConfig.cpp:1497
 msgid "Label objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1467
+#: src/libslic3r/PrintConfig.cpp:1498
 msgid ""
 "Enable this to add comments into the G-Code labeling print moves with what "
 "object they belong to, which is useful for the Octoprint CancelObject "
@@ -2259,73 +2281,81 @@ msgid ""
 "setup and Wipe into Object / Wipe into Infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1474
+#: src/libslic3r/PrintConfig.cpp:1505
 msgid "G-code substitutions"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1475
+#: src/libslic3r/PrintConfig.cpp:1506
 msgid "Find / replace patterns in G-code lines and substitute them."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1480
+#: src/libslic3r/PrintConfig.cpp:1511
+msgid "Export as binary G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1512
+msgid "Exports G-code in binary format."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1517
 msgid "High extruder current on filament swap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1481
+#: src/libslic3r/PrintConfig.cpp:1518
 msgid ""
 "It may be beneficial to increase the extruder motor current during the "
 "filament exchange sequence to allow for rapid ramming feed rates and to "
 "overcome resistance when loading a filament with an ugly shaped tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1489
+#: src/libslic3r/PrintConfig.cpp:1526
 msgid ""
 "This is the acceleration your printer will use for infill. Set zero to "
 "disable acceleration control for infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1498
+#: src/libslic3r/PrintConfig.cpp:1535
 msgid ""
 "This is the acceleration your printer will use for solid infill. Set zero to "
 "use the value for infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1507
+#: src/libslic3r/PrintConfig.cpp:1544
 msgid ""
 "This is the acceleration your printer will use for top solid infill. Set "
 "zero to use the value for solid infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1515 src/libslic3r/PrintConfig.cpp:3136
-#: src/slic3r/GUI/GCodeViewer.cpp:3699 src/slic3r/GUI/GCodeViewer.cpp:4146
+#: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:3161
+#: src/slic3r/GUI/GCodeViewer.cpp:3807 src/slic3r/GUI/GCodeViewer.cpp:4254
 msgid "Travel"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1516
+#: src/libslic3r/PrintConfig.cpp:1553
 msgid ""
 "This is the acceleration your printer will use for travel moves. Set zero to "
 "disable acceleration control for travel."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1524
+#: src/libslic3r/PrintConfig.cpp:1561
 msgid "Combine infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1526
+#: src/libslic3r/PrintConfig.cpp:1563
 msgid ""
 "This feature allows to combine infill and speed up your print by extruding "
 "thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1529
+#: src/libslic3r/PrintConfig.cpp:1566
 msgid "Combine infill every n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1535
+#: src/libslic3r/PrintConfig.cpp:1572
 msgid "Length of the infill anchor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1537
+#: src/libslic3r/PrintConfig.cpp:1574
 msgid ""
 "Connect an infill line to an internal perimeter with a short segment of an "
 "additional perimeter. If expressed as percentage (example: 15%) it is "
@@ -2338,35 +2368,35 @@ msgid ""
 "perimeters connected to a single infill line."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1547
+#: src/libslic3r/PrintConfig.cpp:1584
 msgid "0 (no open anchors)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1548 src/libslic3r/PrintConfig.cpp:1571
+#: src/libslic3r/PrintConfig.cpp:1585 src/libslic3r/PrintConfig.cpp:1608
 msgid "1 mm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:1572
+#: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1609
 msgid "2 mm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1550 src/libslic3r/PrintConfig.cpp:1573
+#: src/libslic3r/PrintConfig.cpp:1587 src/libslic3r/PrintConfig.cpp:1610
 msgid "5 mm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1551 src/libslic3r/PrintConfig.cpp:1574
+#: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:1611
 msgid "10 mm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:1575
+#: src/libslic3r/PrintConfig.cpp:1589 src/libslic3r/PrintConfig.cpp:1612
 msgid "1000 (unlimited)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1558
+#: src/libslic3r/PrintConfig.cpp:1595
 msgid "Maximum length of the infill anchor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1560
+#: src/libslic3r/PrintConfig.cpp:1597
 msgid ""
 "Connect an infill line to an internal perimeter with a short segment of an "
 "additional perimeter. If expressed as percentage (example: 15%) it is "
@@ -2378,19 +2408,19 @@ msgid ""
 "parameter. Set this parameter to zero to disable anchoring."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1570
+#: src/libslic3r/PrintConfig.cpp:1607
 msgid "0 (not anchored)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1581
+#: src/libslic3r/PrintConfig.cpp:1618
 msgid "Infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1583
+#: src/libslic3r/PrintConfig.cpp:1620
 msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1591
+#: src/libslic3r/PrintConfig.cpp:1628
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill. If "
 "left zero, default extrusion width will be used if set, otherwise 1.125 x "
@@ -2399,21 +2429,21 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1602
+#: src/libslic3r/PrintConfig.cpp:1639
 msgid "Infill before perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1603
+#: src/libslic3r/PrintConfig.cpp:1640
 msgid ""
 "This option will switch the print order of perimeters and infill, making the "
 "latter first."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1617
+#: src/libslic3r/PrintConfig.cpp:1654
 msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1619
+#: src/libslic3r/PrintConfig.cpp:1656
 msgid ""
 "This setting applies an additional overlap between infill and perimeters for "
 "better bonding. Theoretically this shouldn't be needed, but backlash might "
@@ -2421,47 +2451,47 @@ msgid ""
 "perimeter extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1630
+#: src/libslic3r/PrintConfig.cpp:1667
 msgid "Speed for printing the internal fill. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1638
+#: src/libslic3r/PrintConfig.cpp:1675
 msgid "Inherits profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1639
+#: src/libslic3r/PrintConfig.cpp:1676
 msgid "Name of the profile, from which this profile inherits."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1652
+#: src/libslic3r/PrintConfig.cpp:1689
 msgid "Interface shells"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1653
+#: src/libslic3r/PrintConfig.cpp:1690
 msgid ""
 "Force the generation of solid shells between adjacent materials/volumes. "
 "Useful for multi-extruder prints with translucent materials or manual "
 "soluble support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1661
+#: src/libslic3r/PrintConfig.cpp:1698
 msgid "Maximum width of a segmented region"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1662
+#: src/libslic3r/PrintConfig.cpp:1699
 msgid "Maximum width of a segmented region. Zero disables this feature."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1663 src/libslic3r/PrintConfig.cpp:1674
-#: src/libslic3r/PrintConfig.cpp:2283 src/libslic3r/PrintConfig.cpp:2292
+#: src/libslic3r/PrintConfig.cpp:1700 src/libslic3r/PrintConfig.cpp:1711
+#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2329
 msgid "mm (zero to disable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1670
+#: src/libslic3r/PrintConfig.cpp:1707
 msgid "Interlocking depth of a segmented region"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1671
+#: src/libslic3r/PrintConfig.cpp:1708
 msgid ""
 "Interlocking depth of a segmented region. It will be ignored if "
 "\"mmu_segmented_region_max_width\" is zero or if "
@@ -2469,48 +2499,48 @@ msgid ""
 "\"mmu_segmented_region_max_width\". Zero disables this feature."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1681
+#: src/libslic3r/PrintConfig.cpp:1718
 msgid "Enable ironing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1682
+#: src/libslic3r/PrintConfig.cpp:1719
 msgid ""
 "Enable ironing of the top layers with the hot print head for smooth surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1688 src/libslic3r/PrintConfig.cpp:1690
+#: src/libslic3r/PrintConfig.cpp:1725 src/libslic3r/PrintConfig.cpp:1727
 msgid "Ironing Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1692
+#: src/libslic3r/PrintConfig.cpp:1729
 msgid "All top surfaces"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1693
+#: src/libslic3r/PrintConfig.cpp:1730
 msgid "Topmost surface only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1694
+#: src/libslic3r/PrintConfig.cpp:1731
 msgid "All solid surfaces"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1700
+#: src/libslic3r/PrintConfig.cpp:1737
 msgid "Flow rate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1702
+#: src/libslic3r/PrintConfig.cpp:1739
 msgid "Percent of a flow rate relative to object's normal layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1710
+#: src/libslic3r/PrintConfig.cpp:1747
 msgid "Spacing between ironing passes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1712
+#: src/libslic3r/PrintConfig.cpp:1749
 msgid "Distance between ironing lines"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1729
+#: src/libslic3r/PrintConfig.cpp:1766
 msgid ""
 "This custom code is inserted at every layer change, right after the Z move "
 "and before the extruder moves to the first layer point. Note that you can "
@@ -2518,11 +2548,11 @@ msgid ""
 "[layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1740
+#: src/libslic3r/PrintConfig.cpp:1777
 msgid "Supports remaining times"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1741
+#: src/libslic3r/PrintConfig.cpp:1778
 msgid ""
 "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
 "intervals into the G-code to let the firmware show accurate remaining time. "
@@ -2530,191 +2560,191 @@ msgid ""
 "firmware supports M73 Qxx Sxx for the silent mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1749
+#: src/libslic3r/PrintConfig.cpp:1786
 msgid "Supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1750
+#: src/libslic3r/PrintConfig.cpp:1787
 msgid "The firmware supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1755
+#: src/libslic3r/PrintConfig.cpp:1792
 msgid "How to apply limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1756
+#: src/libslic3r/PrintConfig.cpp:1793
 msgid "Purpose of Machine Limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1790
-#: src/libslic3r/PrintConfig.cpp:1807 src/libslic3r/PrintConfig.cpp:1824
-#: src/libslic3r/PrintConfig.cpp:1840 src/libslic3r/PrintConfig.cpp:1850
-#: src/libslic3r/PrintConfig.cpp:1860 src/libslic3r/PrintConfig.cpp:1871
-#: src/libslic3r/PrintConfig.cpp:1882 src/slic3r/GUI/Tab.cpp:2871
-#: src/slic3r/GUI/Tab.cpp:3164
+#: src/libslic3r/PrintConfig.cpp:1794 src/libslic3r/PrintConfig.cpp:1827
+#: src/libslic3r/PrintConfig.cpp:1844 src/libslic3r/PrintConfig.cpp:1861
+#: src/libslic3r/PrintConfig.cpp:1877 src/libslic3r/PrintConfig.cpp:1887
+#: src/libslic3r/PrintConfig.cpp:1897 src/libslic3r/PrintConfig.cpp:1908
+#: src/libslic3r/PrintConfig.cpp:1919 src/slic3r/GUI/Tab.cpp:2983
+#: src/slic3r/GUI/Tab.cpp:3276
 msgid "Machine limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1758
+#: src/libslic3r/PrintConfig.cpp:1795
 msgid "How to apply the Machine Limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1760
+#: src/libslic3r/PrintConfig.cpp:1797
 msgid "Emit to G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1761
+#: src/libslic3r/PrintConfig.cpp:1798
 msgid "Use for time estimate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1762
+#: src/libslic3r/PrintConfig.cpp:1799
 msgid "Ignore"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1786
+#: src/libslic3r/PrintConfig.cpp:1823
 msgid "Maximum feedrate X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1787
+#: src/libslic3r/PrintConfig.cpp:1824
 msgid "Maximum feedrate Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1788
+#: src/libslic3r/PrintConfig.cpp:1825
 msgid "Maximum feedrate Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1789
+#: src/libslic3r/PrintConfig.cpp:1826
 msgid "Maximum feedrate E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1792
+#: src/libslic3r/PrintConfig.cpp:1829
 msgid "Maximum feedrate of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1793
+#: src/libslic3r/PrintConfig.cpp:1830
 msgid "Maximum feedrate of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1794
+#: src/libslic3r/PrintConfig.cpp:1831
 msgid "Maximum feedrate of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1795
+#: src/libslic3r/PrintConfig.cpp:1832
 msgid "Maximum feedrate of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1803
+#: src/libslic3r/PrintConfig.cpp:1840
 msgid "Maximum acceleration X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1804
+#: src/libslic3r/PrintConfig.cpp:1841
 msgid "Maximum acceleration Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1805
+#: src/libslic3r/PrintConfig.cpp:1842
 msgid "Maximum acceleration Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1806
+#: src/libslic3r/PrintConfig.cpp:1843
 msgid "Maximum acceleration E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1809
+#: src/libslic3r/PrintConfig.cpp:1846
 msgid "Maximum acceleration of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1810
+#: src/libslic3r/PrintConfig.cpp:1847
 msgid "Maximum acceleration of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1811
+#: src/libslic3r/PrintConfig.cpp:1848
 msgid "Maximum acceleration of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1812
+#: src/libslic3r/PrintConfig.cpp:1849
 msgid "Maximum acceleration of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1820
+#: src/libslic3r/PrintConfig.cpp:1857
 msgid "Maximum jerk X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1821
+#: src/libslic3r/PrintConfig.cpp:1858
 msgid "Maximum jerk Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1822
+#: src/libslic3r/PrintConfig.cpp:1859
 msgid "Maximum jerk Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1823
+#: src/libslic3r/PrintConfig.cpp:1860
 msgid "Maximum jerk E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1826
+#: src/libslic3r/PrintConfig.cpp:1863
 msgid "Maximum jerk of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1827
+#: src/libslic3r/PrintConfig.cpp:1864
 msgid "Maximum jerk of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1828
+#: src/libslic3r/PrintConfig.cpp:1865
 msgid "Maximum jerk of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1829
+#: src/libslic3r/PrintConfig.cpp:1866
 msgid "Maximum jerk of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1839
+#: src/libslic3r/PrintConfig.cpp:1876
 msgid "Minimum feedrate when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1841
+#: src/libslic3r/PrintConfig.cpp:1878
 msgid "Minimum feedrate when extruding (M205 S)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1849
+#: src/libslic3r/PrintConfig.cpp:1886
 msgid "Minimum travel feedrate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1851
+#: src/libslic3r/PrintConfig.cpp:1888
 msgid "Minimum travel feedrate (M205 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1859 src/libslic3r/PrintConfig.cpp:1861
+#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1898
 msgid "Maximum acceleration when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1870
+#: src/libslic3r/PrintConfig.cpp:1907
 msgid "Maximum acceleration when retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:1909
 msgid ""
 "Maximum acceleration when retracting.\n"
 "\n"
 "Not used for RepRapFirmware, which does not support it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1881
+#: src/libslic3r/PrintConfig.cpp:1918
 msgid "Maximum acceleration for travel moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1883
+#: src/libslic3r/PrintConfig.cpp:1920
 msgid "Maximum acceleration for travel moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1890 src/libslic3r/PrintConfig.cpp:1899
+#: src/libslic3r/PrintConfig.cpp:1927 src/libslic3r/PrintConfig.cpp:1936
 msgid "Max"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1891
+#: src/libslic3r/PrintConfig.cpp:1928
 msgid "This setting represents the maximum speed of your fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1900
+#: src/libslic3r/PrintConfig.cpp:1937
 msgid ""
 "This is the highest printable layer height for this extruder, used to cap "
 "the variable layer height and support layer height. Maximum recommended "
@@ -2722,28 +2752,28 @@ msgid ""
 "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1910
+#: src/libslic3r/PrintConfig.cpp:1947
 msgid "Max print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1911
+#: src/libslic3r/PrintConfig.cpp:1948
 msgid ""
 "When setting other speed settings to 0 Slic3r will autocalculate the optimal "
 "speed in order to keep constant extruder pressure. This experimental setting "
 "is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1921
+#: src/libslic3r/PrintConfig.cpp:1958
 msgid ""
 "This experimental setting is used to set the maximum volumetric speed your "
 "extruder supports."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1929
+#: src/libslic3r/PrintConfig.cpp:1966
 msgid "Max volumetric slope positive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1930
+#: src/libslic3r/PrintConfig.cpp:1967
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
@@ -2752,15 +2782,15 @@ msgid ""
 "(feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1935 src/libslic3r/PrintConfig.cpp:1947
+#: src/libslic3r/PrintConfig.cpp:1972 src/libslic3r/PrintConfig.cpp:1984
 msgid "mm³/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1941
+#: src/libslic3r/PrintConfig.cpp:1978
 msgid "Max volumetric slope negative"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1942
+#: src/libslic3r/PrintConfig.cpp:1979
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
@@ -2769,129 +2799,129 @@ msgid ""
 "(feedrate 20 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1953 src/libslic3r/PrintConfig.cpp:1962
+#: src/libslic3r/PrintConfig.cpp:1990 src/libslic3r/PrintConfig.cpp:1999
 msgid "Min"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1954
+#: src/libslic3r/PrintConfig.cpp:1991
 msgid "This setting represents the minimum PWM your fan needs to work."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1963
+#: src/libslic3r/PrintConfig.cpp:2000
 msgid ""
 "This is the lowest printable layer height for this extruder and limits the "
 "resolution for variable layer height. Typical values are between 0.05 mm and "
 "0.1 mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1971
+#: src/libslic3r/PrintConfig.cpp:2008
 msgid "Min print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1972
+#: src/libslic3r/PrintConfig.cpp:2009
 msgid "Slic3r will not scale speed down below this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1979
+#: src/libslic3r/PrintConfig.cpp:2016
 msgid "Minimal filament extrusion length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1980
+#: src/libslic3r/PrintConfig.cpp:2017
 msgid ""
 "Generate no less than the number of skirt loops required to consume the "
 "specified amount of filament on the bottom layer. For multi-extruder "
 "machines, this minimum applies to each extruder."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1989
+#: src/libslic3r/PrintConfig.cpp:2026
 msgid "Configuration notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1990
+#: src/libslic3r/PrintConfig.cpp:2027
 msgid ""
 "You can put here your personal notes. This text will be added to the G-code "
 "header comments."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1999 src/slic3r/GUI/Tab.cpp:2537
-#: src/slic3r/GUI/Tab.cpp:2994
+#: src/libslic3r/PrintConfig.cpp:2036 src/slic3r/GUI/Tab.cpp:2614
+#: src/slic3r/GUI/Tab.cpp:3106
 msgid "Nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2000
+#: src/libslic3r/PrintConfig.cpp:2037
 msgid ""
 "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2005
+#: src/libslic3r/PrintConfig.cpp:2042
 msgid "Host Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2006
+#: src/libslic3r/PrintConfig.cpp:2043
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field must contain "
 "the kind of the host."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2024
+#: src/libslic3r/PrintConfig.cpp:2061
 msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2025
+#: src/libslic3r/PrintConfig.cpp:2062
 msgid ""
 "Disables retraction when the travel path does not exceed the upper layer's "
 "perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2031 src/libslic3r/PrintConfig.cpp:3193
-#: src/slic3r/GUI/Tab.cpp:2089
+#: src/libslic3r/PrintConfig.cpp:2068 src/libslic3r/PrintConfig.cpp:3218
+#: src/slic3r/GUI/Tab.cpp:2164
 msgid "Enable"
 msgstr ""
 
 #. TRN PrintSettings: Enable ooze prevention
-#: src/libslic3r/PrintConfig.cpp:2033
+#: src/libslic3r/PrintConfig.cpp:2070
 msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2038
+#: src/libslic3r/PrintConfig.cpp:2075
 msgid "Output filename format"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2039
+#: src/libslic3r/PrintConfig.cpp:2076
 msgid ""
 "You can use all configuration options as variables inside this template. For "
 "example: [layer_height], [fill_density] etc. You can also use [timestamp], "
 "[year], [month], [day], [hour], [minute], [second], [version], "
-"[input_filename], [input_filename_base], [default_output_extension]."
+"[input_filename_base], [default_output_extension]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2048
+#: src/libslic3r/PrintConfig.cpp:2085
 msgid "Detect bridging perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2050
+#: src/libslic3r/PrintConfig.cpp:2087
 msgid ""
 "Experimental option to adjust flow for overhangs (bridge flow will be used), "
 "to apply bridge speed to them and enable fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2056
+#: src/libslic3r/PrintConfig.cpp:2093
 msgid "Filament parking position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2057
+#: src/libslic3r/PrintConfig.cpp:2094
 msgid ""
 "Distance of the extruder tip from the position where the filament is parked "
 "when unloaded. This should match the value in printer firmware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2065
+#: src/libslic3r/PrintConfig.cpp:2102
 msgid "Extra loading distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2066
+#: src/libslic3r/PrintConfig.cpp:2103
 msgid ""
 "When set to zero, the distance the filament is moved from parking position "
 "during load is exactly the same as it was moved back during unload. When "
@@ -2899,33 +2929,33 @@ msgid ""
 "than unloading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2074 src/libslic3r/PrintConfig.cpp:2099
-#: src/libslic3r/PrintConfig.cpp:2113 src/libslic3r/PrintConfig.cpp:2123
+#: src/libslic3r/PrintConfig.cpp:2111 src/libslic3r/PrintConfig.cpp:2136
+#: src/libslic3r/PrintConfig.cpp:2150 src/libslic3r/PrintConfig.cpp:2160
 msgid "Perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2075
+#: src/libslic3r/PrintConfig.cpp:2112
 msgid ""
 "This is the acceleration your printer will use for perimeters. Set zero to "
 "disable acceleration control for perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2083
+#: src/libslic3r/PrintConfig.cpp:2120
 msgid ""
 "This is the acceleration your printer will use for external perimeters. Set "
 "zero to use the value for perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2090
+#: src/libslic3r/PrintConfig.cpp:2127
 msgid "Perimeter extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2092
+#: src/libslic3r/PrintConfig.cpp:2129
 msgid ""
 "The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2101
+#: src/libslic3r/PrintConfig.cpp:2138
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for perimeters. "
 "You may want to use thinner extrudates to get more accurate surfaces. If "
@@ -2934,12 +2964,12 @@ msgid ""
 "it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2115
+#: src/libslic3r/PrintConfig.cpp:2152
 msgid ""
 "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2125
+#: src/libslic3r/PrintConfig.cpp:2162
 msgid ""
 "This option sets the number of perimeters to generate for each layer. Note "
 "that Slic3r may increase this number automatically when it detects sloping "
@@ -2947,15 +2977,15 @@ msgid ""
 "Perimeters option is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2129
+#: src/libslic3r/PrintConfig.cpp:2166
 msgid "(minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2136 src/slic3r/GUI/Tab.cpp:1709
+#: src/libslic3r/PrintConfig.cpp:2173 src/slic3r/GUI/Tab.cpp:1747
 msgid "Post-processing scripts"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2137
+#: src/libslic3r/PrintConfig.cpp:2174
 msgid ""
 "If you want to process the output G-code through custom scripts, just list "
 "their absolute paths here. Separate multiple scripts with a semicolon. "
@@ -2964,90 +2994,90 @@ msgid ""
 "environment variables."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2149
+#: src/libslic3r/PrintConfig.cpp:2186
 msgid "Printer type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2150
+#: src/libslic3r/PrintConfig.cpp:2187
 msgid "Type of the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2155
+#: src/libslic3r/PrintConfig.cpp:2192
 msgid "Printer notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2156
+#: src/libslic3r/PrintConfig.cpp:2193
 msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2164
+#: src/libslic3r/PrintConfig.cpp:2201
 msgid "Printer vendor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2165
+#: src/libslic3r/PrintConfig.cpp:2202
 msgid "Name of the printer vendor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2170
+#: src/libslic3r/PrintConfig.cpp:2207
 msgid "Printer variant"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2171
+#: src/libslic3r/PrintConfig.cpp:2208
 msgid ""
 "Name of the printer variant. For example, the printer variants may be "
 "differentiated by a nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2188
+#: src/libslic3r/PrintConfig.cpp:2225
 msgid "Raft contact Z distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2190
+#: src/libslic3r/PrintConfig.cpp:2227
 msgid ""
 "The vertical distance between object and raft. Ignored for soluble interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2197
+#: src/libslic3r/PrintConfig.cpp:2234
 msgid "Raft expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2199
+#: src/libslic3r/PrintConfig.cpp:2236
 msgid "Expansion of the raft in XY plane for better stability."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2206
+#: src/libslic3r/PrintConfig.cpp:2243
 msgid "First layer density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2208
+#: src/libslic3r/PrintConfig.cpp:2245
 msgid "Density of the first raft or support layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2216
+#: src/libslic3r/PrintConfig.cpp:2253
 msgid "First layer expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2218
+#: src/libslic3r/PrintConfig.cpp:2255
 msgid ""
 "Expansion of the first raft or support layer to improve adhesion to print "
 "bed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2225
+#: src/libslic3r/PrintConfig.cpp:2262
 msgid "Raft layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2227
+#: src/libslic3r/PrintConfig.cpp:2264
 msgid ""
 "The object will be raised by this number of layers, and support material "
 "will be generated under it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2235
+#: src/libslic3r/PrintConfig.cpp:2272
 msgid "Slice resolution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2236
+#: src/libslic3r/PrintConfig.cpp:2273
 msgid ""
 "Minimum detail resolution, used to simplify the input file for speeding up "
 "the slicing job and reducing memory usage. High-resolution models often "
@@ -3055,11 +3085,11 @@ msgid ""
 "simplification and use full resolution from input."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2246
+#: src/libslic3r/PrintConfig.cpp:2283
 msgid "G-code resolution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2247
+#: src/libslic3r/PrintConfig.cpp:2284
 msgid ""
 "Maximum deviation of exported G-code paths from their full resolution "
 "counterparts. Very high resolution G-code requires huge amount of RAM to "
@@ -3070,218 +3100,218 @@ msgid ""
 "produced."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2258
+#: src/libslic3r/PrintConfig.cpp:2295
 msgid "Minimum travel after retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2259
+#: src/libslic3r/PrintConfig.cpp:2296
 msgid ""
 "Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2265
+#: src/libslic3r/PrintConfig.cpp:2302
 msgid "Retract amount before wipe"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2266
+#: src/libslic3r/PrintConfig.cpp:2303
 msgid ""
 "With bowden extruders, it may be wise to do some amount of quick retract "
 "before doing the wipe movement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2273
+#: src/libslic3r/PrintConfig.cpp:2310
 msgid "Retract on layer change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2274
+#: src/libslic3r/PrintConfig.cpp:2311
 msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2279 src/libslic3r/PrintConfig.cpp:2287
+#: src/libslic3r/PrintConfig.cpp:2316 src/libslic3r/PrintConfig.cpp:2324
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2016
 msgid "Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2280
+#: src/libslic3r/PrintConfig.cpp:2317
 msgid "Retraction Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2281
+#: src/libslic3r/PrintConfig.cpp:2318
 msgid ""
 "When retraction is triggered, filament is pulled back by the specified "
 "amount (the length is measured on raw filament, before it enters the "
 "extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2288
+#: src/libslic3r/PrintConfig.cpp:2325
 msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2289
+#: src/libslic3r/PrintConfig.cpp:2326
 msgid ""
 "When retraction is triggered before changing tool, filament is pulled back "
 "by the specified amount (the length is measured on raw filament, before it "
 "enters the extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2297
+#: src/libslic3r/PrintConfig.cpp:2334
 msgid "Lift Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2298
+#: src/libslic3r/PrintConfig.cpp:2335
 msgid ""
 "If you set this to a positive value, Z is quickly raised every time a "
 "retraction is triggered. When using multiple extruders, only the setting for "
 "the first extruder will be considered."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2305
+#: src/libslic3r/PrintConfig.cpp:2342
 msgid "Above Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2306
+#: src/libslic3r/PrintConfig.cpp:2343
 msgid "Only lift Z above"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2307
+#: src/libslic3r/PrintConfig.cpp:2344
 msgid ""
 "If you set this to a positive value, Z lift will only take place above the "
 "specified absolute Z. You can tune this setting for skipping lift on the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2314
+#: src/libslic3r/PrintConfig.cpp:2351
 msgid "Below Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2315
+#: src/libslic3r/PrintConfig.cpp:2352
 msgid "Only lift Z below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2316
+#: src/libslic3r/PrintConfig.cpp:2353
 msgid ""
 "If you set this to a positive value, Z lift will only take place below the "
 "specified absolute Z. You can tune this setting for limiting lift to the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2324 src/libslic3r/PrintConfig.cpp:2332
+#: src/libslic3r/PrintConfig.cpp:2361 src/libslic3r/PrintConfig.cpp:2369
 msgid "Extra length on restart"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2325
+#: src/libslic3r/PrintConfig.cpp:2362
 msgid ""
 "When the retraction is compensated after the travel move, the extruder will "
 "push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2333
+#: src/libslic3r/PrintConfig.cpp:2370
 msgid ""
 "When the retraction is compensated after changing tool, the extruder will "
 "push this additional amount of filament."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2340 src/libslic3r/PrintConfig.cpp:2341
+#: src/libslic3r/PrintConfig.cpp:2377 src/libslic3r/PrintConfig.cpp:2378
 msgid "Retraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2342
+#: src/libslic3r/PrintConfig.cpp:2379
 msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2348 src/libslic3r/PrintConfig.cpp:2349
+#: src/libslic3r/PrintConfig.cpp:2385 src/libslic3r/PrintConfig.cpp:2386
 msgid "Deretraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2350
+#: src/libslic3r/PrintConfig.cpp:2387
 msgid ""
 "The speed for loading of a filament into extruder after retraction (it only "
 "applies to the extruder motor). If left to zero, the retraction speed is "
 "used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2357
+#: src/libslic3r/PrintConfig.cpp:2394
 msgid "Seam position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2359
+#: src/libslic3r/PrintConfig.cpp:2396
 msgid "Position of perimeters starting points."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2361
+#: src/libslic3r/PrintConfig.cpp:2398
 #: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:91
 msgid "Random"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2362
+#: src/libslic3r/PrintConfig.cpp:2399
 msgid "Nearest"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2363
+#: src/libslic3r/PrintConfig.cpp:2400
 msgid "Aligned"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2364 src/slic3r/GUI/MainFrame.cpp:1230
+#: src/libslic3r/PrintConfig.cpp:2401 src/slic3r/GUI/MainFrame.cpp:1251
 msgid "Rear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2370
+#: src/libslic3r/PrintConfig.cpp:2407
 msgid "Staggered inner seams"
 msgstr ""
 
 #. TRN PrintSettings: "Staggered inner seams"
-#: src/libslic3r/PrintConfig.cpp:2372
+#: src/libslic3r/PrintConfig.cpp:2409
 msgid ""
 "This option causes the inner seams to be shifted backwards based on their "
 "depth, forming a zigzag pattern."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2379
+#: src/libslic3r/PrintConfig.cpp:2416
 msgid "Direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2381
+#: src/libslic3r/PrintConfig.cpp:2418
 msgid "Preferred direction of the seam"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2382
+#: src/libslic3r/PrintConfig.cpp:2419
 msgid "Seam preferred direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2389
+#: src/libslic3r/PrintConfig.cpp:2426
 msgid "Jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2391
+#: src/libslic3r/PrintConfig.cpp:2428
 msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2392
+#: src/libslic3r/PrintConfig.cpp:2429
 msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2399
+#: src/libslic3r/PrintConfig.cpp:2436
 msgid "Distance from brim/object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2400
+#: src/libslic3r/PrintConfig.cpp:2437
 msgid ""
 "Distance between skirt and brim (when draft shield is not used) or objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2406
+#: src/libslic3r/PrintConfig.cpp:2443
 msgid "Skirt height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2407
+#: src/libslic3r/PrintConfig.cpp:2444
 msgid "Height of skirt expressed in layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2413
+#: src/libslic3r/PrintConfig.cpp:2450
 msgid "Draft shield"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2414
+#: src/libslic3r/PrintConfig.cpp:2451
 msgid ""
 "With draft shield active, the skirt will be printed skirt_distance from the "
 "object, possibly intersecting brim.\n"
@@ -3291,81 +3321,81 @@ msgid ""
 "from print bed due to wind draft."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2419
+#: src/libslic3r/PrintConfig.cpp:2456
 msgid "Disabled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2420
+#: src/libslic3r/PrintConfig.cpp:2457
 msgid "Limited"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2421
+#: src/libslic3r/PrintConfig.cpp:2458
 msgid "Enabled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2427
+#: src/libslic3r/PrintConfig.cpp:2464
 msgid "Loops (minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2428
+#: src/libslic3r/PrintConfig.cpp:2465
 msgid "Skirt Loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2429
+#: src/libslic3r/PrintConfig.cpp:2466
 msgid ""
 "Number of loops for the skirt. If the Minimum Extrusion Length option is "
 "set, the number of loops might be greater than the one configured here. Set "
 "this to zero to disable skirt completely."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2437
+#: src/libslic3r/PrintConfig.cpp:2474
 msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2438
+#: src/libslic3r/PrintConfig.cpp:2475
 msgid ""
 "If layer print time is estimated below this number of seconds, print moves "
 "speed will be scaled down to extend duration to this value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2447
+#: src/libslic3r/PrintConfig.cpp:2484
 msgid "Small perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2449
+#: src/libslic3r/PrintConfig.cpp:2486
 msgid ""
 "This separate setting will affect the speed of perimeters having radius <= "
 "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
 "be calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2459
+#: src/libslic3r/PrintConfig.cpp:2496
 msgid "Solid infill threshold area"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2461
+#: src/libslic3r/PrintConfig.cpp:2498
 msgid ""
 "Force solid infill for regions having a smaller area than the specified "
 "threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2462
+#: src/libslic3r/PrintConfig.cpp:2499
 msgid "mm²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2468
+#: src/libslic3r/PrintConfig.cpp:2505
 msgid "Solid infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2470
+#: src/libslic3r/PrintConfig.cpp:2507
 msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2476 src/libslic3r/PrintConfig.cpp:3304
+#: src/libslic3r/PrintConfig.cpp:2513 src/libslic3r/PrintConfig.cpp:3329
 msgid "Solid infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2478 src/libslic3r/PrintConfig.cpp:3306
+#: src/libslic3r/PrintConfig.cpp:2515 src/libslic3r/PrintConfig.cpp:3331
 msgid ""
 "This feature allows to force a solid layer every given number of layers. "
 "Zero to disable. You can set this to any value (for example 9999); Slic3r "
@@ -3373,7 +3403,7 @@ msgid ""
 "according to nozzle diameter and layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2490
+#: src/libslic3r/PrintConfig.cpp:2527
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "solid surfaces. If left zero, default extrusion width will be used if set, "
@@ -3381,30 +3411,30 @@ msgid ""
 "(for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2502
+#: src/libslic3r/PrintConfig.cpp:2539
 msgid ""
 "Speed for printing solid regions (top/bottom/internal horizontal shells). "
 "This can be expressed as a percentage (for example: 80%) over the default "
 "infill speed above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2513 src/slic3r/GUI/Tab.cpp:1442
+#: src/libslic3r/PrintConfig.cpp:2550 src/slic3r/GUI/Tab.cpp:1450
 msgid "Solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2514
+#: src/libslic3r/PrintConfig.cpp:2551
 msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2520 src/libslic3r/PrintConfig.cpp:2521
+#: src/libslic3r/PrintConfig.cpp:2557 src/libslic3r/PrintConfig.cpp:2558
 msgid "Minimum thickness of a top / bottom shell"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2527
+#: src/libslic3r/PrintConfig.cpp:2564
 msgid "Spiral vase"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2528
+#: src/libslic3r/PrintConfig.cpp:2565
 msgid ""
 "This feature will raise Z gradually while printing a single-walled object in "
 "order to remove any visible seam. This option requires a single perimeter, "
@@ -3413,22 +3443,22 @@ msgid ""
 "when printing more than one single object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2536
+#: src/libslic3r/PrintConfig.cpp:2573
 msgid "Temperature variation"
 msgstr ""
 
 #. TRN PrintSettings : "Ooze prevention" > "Temperature variation"
-#: src/libslic3r/PrintConfig.cpp:2538
+#: src/libslic3r/PrintConfig.cpp:2575
 msgid ""
 "Temperature difference to be applied when an extruder is not active. The "
 "value is not used when 'idle_temperature' in filament settings is defined."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2548
+#: src/libslic3r/PrintConfig.cpp:2585
 msgid "Emit temperature commands automatically"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2549
+#: src/libslic3r/PrintConfig.cpp:2586
 msgid ""
 "When enabled, PrusaSlicer will check whether your Custom Start G-Code "
 "contains M104 or M190. If so, the temperatures will not be emitted "
@@ -3444,13 +3474,13 @@ msgid ""
 "bed, leaving both to Custom Start G-Code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2564
+#: src/libslic3r/PrintConfig.cpp:2601
 msgid ""
 "This start procedure is inserted at the beginning, possibly prepended by "
 "temperature-changing commands. See 'autoemit_temperature_commands'."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2574
+#: src/libslic3r/PrintConfig.cpp:2611
 msgid ""
 "This start procedure is inserted at the beginning, after any printer start "
 "gcode (and after any toolchange to this filament in case of multi-material "
@@ -3463,45 +3493,45 @@ msgid ""
 "extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2590
+#: src/libslic3r/PrintConfig.cpp:2627
 msgid "Color change G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2591
+#: src/libslic3r/PrintConfig.cpp:2628
 msgid "This G-code will be used as a code for the color change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2600
+#: src/libslic3r/PrintConfig.cpp:2637
 msgid "This G-code will be used as a code for the pause print"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2609
+#: src/libslic3r/PrintConfig.cpp:2646
 msgid "This G-code will be used as a custom code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2617
+#: src/libslic3r/PrintConfig.cpp:2654
 msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2618
+#: src/libslic3r/PrintConfig.cpp:2655
 msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2623
+#: src/libslic3r/PrintConfig.cpp:2660
 msgid "Prime all printing extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2624
+#: src/libslic3r/PrintConfig.cpp:2661
 msgid ""
 "If enabled, all printing extruders will be primed at the front edge of the "
 "print bed at the start of the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2629
+#: src/libslic3r/PrintConfig.cpp:2666
 msgid "No sparse layers (EXPERIMENTAL)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2630
+#: src/libslic3r/PrintConfig.cpp:2667
 msgid ""
 "If enabled, the wipe tower will not be printed on layers with no "
 "toolchanges. On layers with a toolchange, extruder will travel downward to "
@@ -3509,117 +3539,117 @@ msgid ""
 "with the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2637
+#: src/libslic3r/PrintConfig.cpp:2674
 msgid "Slice gap closing radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2639
+#: src/libslic3r/PrintConfig.cpp:2676
 msgid ""
 "Cracks smaller than 2x gap closing radius are being filled during the "
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2647
+#: src/libslic3r/PrintConfig.cpp:2684
 msgid "Slicing Mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2649
+#: src/libslic3r/PrintConfig.cpp:2686
 msgid ""
 "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
 "close all holes in the model."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2651
+#: src/libslic3r/PrintConfig.cpp:2688
 msgid "Regular"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2652
+#: src/libslic3r/PrintConfig.cpp:2689
 msgid "Even-odd"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2653
+#: src/libslic3r/PrintConfig.cpp:2690
 msgid "Close holes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2659
+#: src/libslic3r/PrintConfig.cpp:2696
 msgid "Generate support material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2661
+#: src/libslic3r/PrintConfig.cpp:2698
 msgid "Enable support material generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2665
+#: src/libslic3r/PrintConfig.cpp:2702
 msgid "Auto generated supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2667
+#: src/libslic3r/PrintConfig.cpp:2704
 msgid ""
 "If checked, supports will be generated automatically based on the overhang "
 "threshold value. If unchecked, supports will be generated inside the "
 "\"Support Enforcer\" volumes only."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2673
+#: src/libslic3r/PrintConfig.cpp:2710
 msgid "XY separation between an object and its support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2675
+#: src/libslic3r/PrintConfig.cpp:2712
 msgid ""
 "XY separation between an object and its support. If expressed as percentage "
 "(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2686
+#: src/libslic3r/PrintConfig.cpp:2723
 msgid "Pattern angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2688
+#: src/libslic3r/PrintConfig.cpp:2725
 msgid ""
 "Use this setting to rotate the support material pattern on the horizontal "
 "plane."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2696 src/libslic3r/PrintConfig.cpp:3563
-#: src/slic3r/GUI/Plater.cpp:464
+#: src/libslic3r/PrintConfig.cpp:2733 src/libslic3r/PrintConfig.cpp:3588
+#: src/slic3r/GUI/Plater.cpp:467
 msgid "Support on build plate only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:3565
+#: src/libslic3r/PrintConfig.cpp:2735 src/libslic3r/PrintConfig.cpp:3590
 msgid ""
 "Only create support if it lies on a build plate. Don't create support on a "
 "print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2703
+#: src/libslic3r/PrintConfig.cpp:2740
 msgid "Top contact Z distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2705
+#: src/libslic3r/PrintConfig.cpp:2742
 msgid ""
 "The vertical distance between object and support material interface. Setting "
 "this to 0 will also prevent Slic3r from using bridge flow and speed for the "
 "first object layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2711
+#: src/libslic3r/PrintConfig.cpp:2748
 msgid "0 (soluble)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2712
+#: src/libslic3r/PrintConfig.cpp:2749
 msgid "0.1 (detachable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2713
+#: src/libslic3r/PrintConfig.cpp:2750
 msgid "0.2 (detachable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2719
+#: src/libslic3r/PrintConfig.cpp:2756
 msgid "Bottom contact Z distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2721
+#: src/libslic3r/PrintConfig.cpp:2758
 msgid ""
 "The vertical distance between the object top surface and the support "
 "material interface. If set to zero, support_material_contact_distance will "
@@ -3628,15 +3658,15 @@ msgstr ""
 
 #. TRN Print Settings: "Bottom contact Z distance". Have to be as short as possible
 #. TRN Print Settings: "Bottom interface layers". Have to be as short as possible
-#: src/libslic3r/PrintConfig.cpp:2727 src/libslic3r/PrintConfig.cpp:2808
+#: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2845
 msgid "Same as top"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2735
+#: src/libslic3r/PrintConfig.cpp:2772
 msgid "Enforce support for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2737
+#: src/libslic3r/PrintConfig.cpp:2774
 msgid ""
 "Generate support material for the specified number of layers counting from "
 "bottom, regardless of whether normal support material is enabled or not and "
@@ -3644,21 +3674,21 @@ msgid ""
 "of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2742
+#: src/libslic3r/PrintConfig.cpp:2779
 msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2748
+#: src/libslic3r/PrintConfig.cpp:2785
 msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2750
+#: src/libslic3r/PrintConfig.cpp:2787
 msgid ""
 "The extruder to use when printing support material, raft and skirt (1+, 0 to "
 "use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2759
+#: src/libslic3r/PrintConfig.cpp:2796
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for support "
 "material. If left zero, default extrusion width will be used if set, "
@@ -3666,158 +3696,158 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2769
+#: src/libslic3r/PrintConfig.cpp:2806
 msgid "Interface loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2771
+#: src/libslic3r/PrintConfig.cpp:2808
 msgid ""
 "Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2776
+#: src/libslic3r/PrintConfig.cpp:2813
 msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2778
+#: src/libslic3r/PrintConfig.cpp:2815
 msgid ""
 "The extruder to use when printing support material interface (1+, 0 to use "
 "the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2785
+#: src/libslic3r/PrintConfig.cpp:2822
 msgid "Top interface layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2787
+#: src/libslic3r/PrintConfig.cpp:2824
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2791 src/libslic3r/PrintConfig.cpp:2809
+#: src/libslic3r/PrintConfig.cpp:2828 src/libslic3r/PrintConfig.cpp:2846
 msgid "0 (off)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2792 src/libslic3r/PrintConfig.cpp:2810
+#: src/libslic3r/PrintConfig.cpp:2829 src/libslic3r/PrintConfig.cpp:2847
 msgid "1 (light)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2793 src/libslic3r/PrintConfig.cpp:2811
+#: src/libslic3r/PrintConfig.cpp:2830 src/libslic3r/PrintConfig.cpp:2848
 msgid "2 (default)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2794 src/libslic3r/PrintConfig.cpp:2812
+#: src/libslic3r/PrintConfig.cpp:2831 src/libslic3r/PrintConfig.cpp:2849
 msgid "3 (heavy)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2800
+#: src/libslic3r/PrintConfig.cpp:2837
 msgid "Bottom interface layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2802
+#: src/libslic3r/PrintConfig.cpp:2839
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material. Set to -1 to use support_material_interface_layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2818
+#: src/libslic3r/PrintConfig.cpp:2855
 msgid "Closing radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2820
+#: src/libslic3r/PrintConfig.cpp:2857
 msgid ""
 "For snug supports, the support regions will be merged using morphological "
 "closing operation. Gaps smaller than the closing radius will be filled in."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2828
+#: src/libslic3r/PrintConfig.cpp:2865
 msgid "Interface pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2830
+#: src/libslic3r/PrintConfig.cpp:2867
 msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2839
+#: src/libslic3r/PrintConfig.cpp:2876
 msgid ""
 "Speed for printing support material interface layers. If expressed as "
 "percentage (for example 50%) it will be calculated over support material "
 "speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2848
+#: src/libslic3r/PrintConfig.cpp:2885
 msgid "Pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2850
+#: src/libslic3r/PrintConfig.cpp:2887
 msgid "Pattern used to generate support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2853
+#: src/libslic3r/PrintConfig.cpp:2890
 msgid "Rectilinear grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2860
+#: src/libslic3r/PrintConfig.cpp:2897
 msgid "Interface pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2862
+#: src/libslic3r/PrintConfig.cpp:2899
 msgid ""
 "Pattern used to generate support material interface. Default pattern for non-"
 "soluble support interface is Rectilinear, while default pattern for soluble "
 "support interface is Concentric."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2874
+#: src/libslic3r/PrintConfig.cpp:2911
 msgid "Pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2876
+#: src/libslic3r/PrintConfig.cpp:2913
 msgid "Spacing between support material lines."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2885
+#: src/libslic3r/PrintConfig.cpp:2922
 msgid "Speed for printing support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2892 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:230
+#: src/libslic3r/PrintConfig.cpp:2929 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:230
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2639
 msgid "Style"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2894
+#: src/libslic3r/PrintConfig.cpp:2931
 msgid ""
 "Style and shape of the support towers. Projecting the supports into a "
 "regular grid will create more stable supports, while snug support towers "
 "will save material and reduce object scarring."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2899
+#: src/libslic3r/PrintConfig.cpp:2936
 msgid "Snug"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2900
+#: src/libslic3r/PrintConfig.cpp:2937
 msgid "Organic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2906
+#: src/libslic3r/PrintConfig.cpp:2943
 msgid "Synchronize with object layers"
 msgstr ""
 
 #. TRN PrintSettings : "Synchronize with object layers"
-#: src/libslic3r/PrintConfig.cpp:2909
+#: src/libslic3r/PrintConfig.cpp:2946
 msgid ""
 "Synchronize support layers with the object print layers. This is useful with "
 "multi-material printers, where the extruder switch is expensive. This option "
 "is only available when top contact Z distance is set to zero."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2916
+#: src/libslic3r/PrintConfig.cpp:2953
 msgid "Overhang threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2918
+#: src/libslic3r/PrintConfig.cpp:2955
 msgid ""
 "Support material will not be generated for overhangs whose slope angle (90° "
 "= vertical) is above the given threshold. In other words, this value "
@@ -3826,67 +3856,67 @@ msgid ""
 "detection (recommended)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2930
+#: src/libslic3r/PrintConfig.cpp:2967
 msgid "With sheath around the support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2932
+#: src/libslic3r/PrintConfig.cpp:2969
 msgid ""
 "Add a sheath (a single perimeter line) around the base support. This makes "
 "the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2938
+#: src/libslic3r/PrintConfig.cpp:2975
 msgid "Maximum Branch Angle"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Maximum Branch Angle"
-#: src/libslic3r/PrintConfig.cpp:2941
+#: src/libslic3r/PrintConfig.cpp:2978
 msgid ""
 "The maximum angle of the branches, when the branches have to avoid the "
 "model. Use a lower angle to make them more vertical and more stable. Use a "
 "higher angle to be able to have more reach."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2950
+#: src/libslic3r/PrintConfig.cpp:2987
 msgid "Preferred Branch Angle"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
-#: src/libslic3r/PrintConfig.cpp:2953
+#: src/libslic3r/PrintConfig.cpp:2990
 msgid ""
 "The preferred angle of the branches, when they do not have to avoid the "
 "model. Use a lower angle to make them more vertical and more stable. Use a "
 "higher angle for branches to merge faster."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2962
+#: src/libslic3r/PrintConfig.cpp:2999
 msgid "Tip Diameter"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Tip Diameter"
-#: src/libslic3r/PrintConfig.cpp:2965
+#: src/libslic3r/PrintConfig.cpp:3002
 msgid "Branch tip diameter for organic supports."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2973
+#: src/libslic3r/PrintConfig.cpp:3010
 msgid "Branch Diameter"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Branch Diameter"
-#: src/libslic3r/PrintConfig.cpp:2976
+#: src/libslic3r/PrintConfig.cpp:3013
 msgid ""
 "The diameter of the thinnest branches of organic support. Thicker branches "
 "are more sturdy. Branches towards the base will be thicker than this."
 msgstr ""
 
 #. TRN PrintSettings: #lmFIXME
-#: src/libslic3r/PrintConfig.cpp:2986
+#: src/libslic3r/PrintConfig.cpp:3023
 msgid "Branch Diameter Angle"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
-#: src/libslic3r/PrintConfig.cpp:2989
+#: src/libslic3r/PrintConfig.cpp:3026
 msgid ""
 "The angle of the branches' diameter as they gradually become thicker towards "
 "the bottom. An angle of 0 will cause the branches to have uniform thickness "
@@ -3894,12 +3924,12 @@ msgid ""
 "support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2999
+#: src/libslic3r/PrintConfig.cpp:3036
 msgid "Branch Diameter with double walls"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Branch Diameter"
-#: src/libslic3r/PrintConfig.cpp:3002
+#: src/libslic3r/PrintConfig.cpp:3039
 msgid ""
 "Branches with area larger than the area of a circle of this diameter will be "
 "printed with double walls for stability. Set this value to zero for no "
@@ -3907,24 +3937,24 @@ msgid ""
 msgstr ""
 
 #. TRN PrintSettings: #lmFIXME
-#: src/libslic3r/PrintConfig.cpp:3015
+#: src/libslic3r/PrintConfig.cpp:3052
 msgid "Branch Distance"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Branch Distance"
-#: src/libslic3r/PrintConfig.cpp:3018
+#: src/libslic3r/PrintConfig.cpp:3055
 msgid ""
 "How far apart the branches need to be when they touch the model. Making this "
 "distance small will cause the tree support to touch the model at more "
 "points, causing better overhang but making support harder to remove."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3025
+#: src/libslic3r/PrintConfig.cpp:3062
 msgid "Branch Density"
 msgstr ""
 
 #. TRN PrintSettings: "Organic supports" > "Branch Density"
-#: src/libslic3r/PrintConfig.cpp:3028
+#: src/libslic3r/PrintConfig.cpp:3065
 msgid ""
 "Adjusts the density of the support structure used to generate the tips of "
 "the branches. A higher value results in better overhangs but the supports "
@@ -3933,48 +3963,38 @@ msgid ""
 "needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3040
+#: src/libslic3r/PrintConfig.cpp:3077
 msgid ""
 "Nozzle temperature for layers after the first one. Set this to zero to "
 "disable temperature control commands in the output G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3043
+#: src/libslic3r/PrintConfig.cpp:3080
 msgid "Nozzle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3049
+#: src/libslic3r/PrintConfig.cpp:3086
 msgid "Thick bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3051
+#: src/libslic3r/PrintConfig.cpp:3088
 msgid ""
 "If enabled, bridges are more reliable, can bridge longer distances, but may "
 "look worse. If disabled, bridges look better but are reliable just for "
 "shorter bridged distances."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3057
+#: src/libslic3r/PrintConfig.cpp:3094
 msgid "Detect thin walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3059
+#: src/libslic3r/PrintConfig.cpp:3096
 msgid ""
 "Detect single-width walls (parts where two extrusions don't fit and we need "
 "to collapse them into a single trace)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3065
-msgid "Threads"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3066
-msgid ""
-"Threads are used to parallelize long-running tasks. Optimal threads number "
-"is slightly above the number of available cores/processors."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3078
+#: src/libslic3r/PrintConfig.cpp:3103
 msgid ""
 "This custom code is inserted before every toolchange. Placeholder variables "
 "for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
@@ -3984,7 +4004,7 @@ msgid ""
 "behaviour both before and after the toolchange."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3091
+#: src/libslic3r/PrintConfig.cpp:3116
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "top surfaces. You may want to use thinner extrudates to fill all narrow "
@@ -3993,7 +4013,7 @@ msgid ""
 "percentage (for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3104
+#: src/libslic3r/PrintConfig.cpp:3129
 msgid ""
 "Speed for printing top solid layers (it only applies to the uppermost "
 "external layers and not to their internal solid layers). You may want to "
@@ -4003,70 +4023,70 @@ msgid ""
 msgstr ""
 
 #. TRN Print Settings: "Top solid layers"
-#: src/libslic3r/PrintConfig.cpp:3117 src/libslic3r/PrintConfig.cpp:3125
+#: src/libslic3r/PrintConfig.cpp:3142 src/libslic3r/PrintConfig.cpp:3150
 msgctxt "Layers"
 msgid "Top"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3119
+#: src/libslic3r/PrintConfig.cpp:3144
 msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3120
+#: src/libslic3r/PrintConfig.cpp:3145
 msgid "Top solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3127
+#: src/libslic3r/PrintConfig.cpp:3152
 msgid ""
 "The number of top solid layers is increased above top_solid_layers if "
 "necessary to satisfy minimum thickness of top shell. This is useful to "
 "prevent pillowing effect when printing with variable layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3130
+#: src/libslic3r/PrintConfig.cpp:3155
 msgid "Minimum top shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3137
+#: src/libslic3r/PrintConfig.cpp:3162
 msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3145
+#: src/libslic3r/PrintConfig.cpp:3170
 msgid "Z travel"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3146
+#: src/libslic3r/PrintConfig.cpp:3171
 msgid ""
 "Speed for movements along the Z axis.\n"
 "When set to zero, the value is ignored and regular travel speed is used "
 "instead."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3154
+#: src/libslic3r/PrintConfig.cpp:3179
 msgid "Use firmware retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3155
+#: src/libslic3r/PrintConfig.cpp:3180
 msgid ""
-"This experimental setting uses G10 and G11 commands to have the firmware "
-"handle the retraction. This is only supported in recent Marlin."
+"This setting uses G10 and G11 commands to have the firmware handle the "
+"retraction. Note that this has to be supported by firmware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3161
+#: src/libslic3r/PrintConfig.cpp:3186
 msgid "Use relative E distances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3162
+#: src/libslic3r/PrintConfig.cpp:3187
 msgid ""
 "If your firmware requires relative E values, check this, otherwise leave it "
 "unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3168
+#: src/libslic3r/PrintConfig.cpp:3193
 msgid "Use volumetric E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3169
+#: src/libslic3r/PrintConfig.cpp:3194
 msgid ""
 "This experimental setting uses outputs the E values in cubic millimeters "
 "instead of linear millimeters. If your firmware doesn't already know "
@@ -4076,168 +4096,168 @@ msgid ""
 "only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3179
+#: src/libslic3r/PrintConfig.cpp:3204
 msgid "Enable variable layer height feature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3180
+#: src/libslic3r/PrintConfig.cpp:3205
 msgid ""
 "Some printers or printer setups may have difficulties printing with a "
 "variable layer height. Enabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3186
+#: src/libslic3r/PrintConfig.cpp:3211
 msgid "Wipe while retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3187
+#: src/libslic3r/PrintConfig.cpp:3212
 msgid ""
 "This flag will move the nozzle while retracting to minimize the possible "
 "blob on leaky extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3194
+#: src/libslic3r/PrintConfig.cpp:3219
 msgid ""
 "Multi material printers may need to prime or purge extruders on tool "
 "changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3200
+#: src/libslic3r/PrintConfig.cpp:3225
 msgid "Purging volumes - load/unload volumes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3201
+#: src/libslic3r/PrintConfig.cpp:3226
 msgid ""
 "This vector saves required volumes to change from/to each tool used on the "
 "wipe tower. These values are used to simplify creation of the full purging "
 "volumes below."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3207
+#: src/libslic3r/PrintConfig.cpp:3232
 msgid "Purging volumes - matrix"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3208
+#: src/libslic3r/PrintConfig.cpp:3233
 msgid ""
 "This matrix describes volumes (in cubic milimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3217
+#: src/libslic3r/PrintConfig.cpp:3242
 msgid "Position X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3218
+#: src/libslic3r/PrintConfig.cpp:3243
 msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3224
+#: src/libslic3r/PrintConfig.cpp:3249
 msgid "Position Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3225
+#: src/libslic3r/PrintConfig.cpp:3250
 msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3231 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
+#: src/libslic3r/PrintConfig.cpp:3256 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:236
 msgid "Width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3232
+#: src/libslic3r/PrintConfig.cpp:3257
 msgid "Width of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3238
+#: src/libslic3r/PrintConfig.cpp:3263
 msgid "Wipe tower rotation angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3239
+#: src/libslic3r/PrintConfig.cpp:3264
 msgid "Wipe tower rotation angle with respect to x-axis."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3245 src/libslic3r/PrintConfig.cpp:3246
+#: src/libslic3r/PrintConfig.cpp:3270 src/libslic3r/PrintConfig.cpp:3271
 msgid "Wipe tower brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3253
+#: src/libslic3r/PrintConfig.cpp:3278
 msgid "Stabilization cone apex angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3254
+#: src/libslic3r/PrintConfig.cpp:3279
 msgid ""
 "Angle at the apex of the cone that is used to stabilize the wipe tower. "
 "Larger angle means wider base."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3263
+#: src/libslic3r/PrintConfig.cpp:3288
 msgid "Wipe tower purge lines spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3264
+#: src/libslic3r/PrintConfig.cpp:3289
 msgid "Spacing of purge lines on the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3272 src/libslic3r/PrintConfig.cpp:3280
+#: src/libslic3r/PrintConfig.cpp:3297 src/libslic3r/PrintConfig.cpp:3305
 #: src/slic3r/GUI/GUI_Factories.cpp:63 src/slic3r/GUI/GUI_Factories.cpp:139
 msgid "Wipe options"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3273
+#: src/libslic3r/PrintConfig.cpp:3298
 msgid "Wipe into this object's infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3274
+#: src/libslic3r/PrintConfig.cpp:3299
 msgid ""
 "Purging after toolchange will be done inside this object's infills. This "
 "lowers the amount of waste but may result in longer print time  due to "
 "additional travel moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3281
+#: src/libslic3r/PrintConfig.cpp:3306
 msgid "Wipe into this object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3282
+#: src/libslic3r/PrintConfig.cpp:3307
 msgid ""
 "Object will be used to purge the nozzle after a toolchange to save material "
 "that would otherwise end up in the wipe tower and decrease print time. "
 "Colours of the objects will be mixed as a result."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3288
+#: src/libslic3r/PrintConfig.cpp:3313
 msgid "Maximal bridging distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3289
+#: src/libslic3r/PrintConfig.cpp:3314
 msgid "Maximal distance between supports on sparse infill sections."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3295
+#: src/libslic3r/PrintConfig.cpp:3320
 msgid "Wipe tower extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3297
+#: src/libslic3r/PrintConfig.cpp:3322
 msgid ""
 "The extruder to use when printing perimeter of the wipe tower. Set to 0 to "
 "use the one that is available (non-soluble would be preferred)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3316
+#: src/libslic3r/PrintConfig.cpp:3341
 msgid "XY Size Compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3318
+#: src/libslic3r/PrintConfig.cpp:3343
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
 "tuning hole sizes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3326
+#: src/libslic3r/PrintConfig.cpp:3351
 msgid "Z offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3327
+#: src/libslic3r/PrintConfig.cpp:3352
 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
 "output G-code. It is used to compensate for bad Z endstop position: for "
@@ -4245,11 +4265,11 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3336
+#: src/libslic3r/PrintConfig.cpp:3361
 msgid "Perimeter generator"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3338
+#: src/libslic3r/PrintConfig.cpp:3363
 msgid ""
 "Classic perimeter generator produces perimeters with constant extrusion "
 "width and for very thin areas is used gap-fill. Arachne engine produces "
@@ -4257,19 +4277,19 @@ msgid ""
 "Concentric infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3343
+#: src/libslic3r/PrintConfig.cpp:3368
 msgid "Classic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3344
+#: src/libslic3r/PrintConfig.cpp:3369
 msgid "Arachne"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3350
+#: src/libslic3r/PrintConfig.cpp:3375
 msgid "Perimeter transition length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3352
+#: src/libslic3r/PrintConfig.cpp:3377
 msgid ""
 "When transitioning between different numbers of perimeters as the part "
 "becomes thinner, a certain amount of space is allotted to split or join the "
@@ -4277,11 +4297,11 @@ msgid ""
 "be computed based on the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3361
+#: src/libslic3r/PrintConfig.cpp:3386
 msgid "Perimeter transitioning filter margin"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3363
+#: src/libslic3r/PrintConfig.cpp:3388
 msgid ""
 "Prevent transitioning back and forth between one extra perimeter and one "
 "less. This margin extends the range of extrusion widths which follow to "
@@ -4293,11 +4313,11 @@ msgid ""
 "diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3376
+#: src/libslic3r/PrintConfig.cpp:3401
 msgid "Perimeter transitioning threshold angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3378
+#: src/libslic3r/PrintConfig.cpp:3403
 msgid ""
 "When to create transitions between even and odd numbers of perimeters. A "
 "wedge shape with an angle greater than this setting will not have "
@@ -4306,22 +4326,22 @@ msgid ""
 "these center perimeters, but may leave gaps or overextrude."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3389
+#: src/libslic3r/PrintConfig.cpp:3414
 msgid "Perimeter distribution count"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3391
+#: src/libslic3r/PrintConfig.cpp:3416
 msgid ""
 "The number of perimeters, counted from the center, over which the variation "
 "needs to be spread. Lower values mean that the outer perimeters don't change "
 "in width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3398
+#: src/libslic3r/PrintConfig.cpp:3423
 msgid "Minimum feature size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3400
+#: src/libslic3r/PrintConfig.cpp:3425
 msgid ""
 "Minimum thickness of thin features. Model features that are thinner than "
 "this value will not be printed, while features thicker than the Minimum "
@@ -4330,11 +4350,11 @@ msgid ""
 "diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3410
+#: src/libslic3r/PrintConfig.cpp:3435
 msgid "Minimum perimeter width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3412
+#: src/libslic3r/PrintConfig.cpp:3437
 msgid ""
 "Width of the perimeter that will replace thin features (according to the "
 "Minimum feature size) of the model. If the Minimum perimeter width is "
@@ -4343,544 +4363,544 @@ msgid ""
 "it will be computed based on the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3481
+#: src/libslic3r/PrintConfig.cpp:3506
 msgid "Pinhead front diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3482 src/libslic3r/PrintConfig.cpp:3491
-#: src/libslic3r/PrintConfig.cpp:3500 src/libslic3r/PrintConfig.cpp:3510
-#: src/libslic3r/PrintConfig.cpp:3520 src/libslic3r/PrintConfig.cpp:3541
-#: src/libslic3r/PrintConfig.cpp:3564 src/libslic3r/PrintConfig.cpp:3571
-#: src/libslic3r/PrintConfig.cpp:3586 src/libslic3r/PrintConfig.cpp:3596
-#: src/libslic3r/PrintConfig.cpp:3605 src/libslic3r/PrintConfig.cpp:3618
-#: src/libslic3r/PrintConfig.cpp:3628 src/libslic3r/PrintConfig.cpp:3642
-#: src/libslic3r/PrintConfig.cpp:3652 src/libslic3r/PrintConfig.cpp:3997
-#: src/libslic3r/PrintConfig.cpp:4019 src/libslic3r/PrintConfig.cpp:4026
-#: src/libslic3r/PrintConfig.cpp:4034 src/slic3r/GUI/GUI_Factories.cpp:144
-#: src/slic3r/GUI/Plater.cpp:459 src/slic3r/GUI/Tab.cpp:5260
-#: src/slic3r/GUI/Tab.cpp:5262
+#: src/libslic3r/PrintConfig.cpp:3507 src/libslic3r/PrintConfig.cpp:3516
+#: src/libslic3r/PrintConfig.cpp:3525 src/libslic3r/PrintConfig.cpp:3535
+#: src/libslic3r/PrintConfig.cpp:3545 src/libslic3r/PrintConfig.cpp:3566
+#: src/libslic3r/PrintConfig.cpp:3589 src/libslic3r/PrintConfig.cpp:3596
+#: src/libslic3r/PrintConfig.cpp:3611 src/libslic3r/PrintConfig.cpp:3621
+#: src/libslic3r/PrintConfig.cpp:3630 src/libslic3r/PrintConfig.cpp:3643
+#: src/libslic3r/PrintConfig.cpp:3653 src/libslic3r/PrintConfig.cpp:3667
+#: src/libslic3r/PrintConfig.cpp:3677 src/libslic3r/PrintConfig.cpp:4022
+#: src/libslic3r/PrintConfig.cpp:4044 src/libslic3r/PrintConfig.cpp:4051
+#: src/libslic3r/PrintConfig.cpp:4059 src/slic3r/GUI/GUI_Factories.cpp:144
+#: src/slic3r/GUI/Plater.cpp:462 src/slic3r/GUI/Tab.cpp:5399
+#: src/slic3r/GUI/Tab.cpp:5401
 msgid "Supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3483
+#: src/libslic3r/PrintConfig.cpp:3508
 msgid "Diameter of the pointing side of the head"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3490
+#: src/libslic3r/PrintConfig.cpp:3515
 msgid "Head penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3492
+#: src/libslic3r/PrintConfig.cpp:3517
 msgid "How much the pinhead has to penetrate the model surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3499
+#: src/libslic3r/PrintConfig.cpp:3524
 msgid "Pinhead width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3501
+#: src/libslic3r/PrintConfig.cpp:3526
 msgid "Width from the back sphere center to the front sphere center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3509
+#: src/libslic3r/PrintConfig.cpp:3534
 msgid "Pillar diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3511
+#: src/libslic3r/PrintConfig.cpp:3536
 msgid "Diameter in mm of the support pillars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3519
+#: src/libslic3r/PrintConfig.cpp:3544
 msgid "Small pillar diameter percent"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3521
+#: src/libslic3r/PrintConfig.cpp:3546
 msgid ""
 "The percentage of smaller pillars compared to the normal pillar diameter "
 "which are used in problematic areas where a normal pilla cannot fit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3530
+#: src/libslic3r/PrintConfig.cpp:3555
 msgid "Max bridges on a pillar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3532
+#: src/libslic3r/PrintConfig.cpp:3557
 msgid ""
 "Maximum number of bridges that can be placed on a pillar. Bridges hold "
 "support point pinheads and connect to pillars as small branches."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3540
+#: src/libslic3r/PrintConfig.cpp:3565
 msgid "Max weight on model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3543
+#: src/libslic3r/PrintConfig.cpp:3568
 msgid ""
 "Maximum weight of sub-trees that terminate on the model instead of the print "
 "bed. The weight is the sum of the lenghts of all branches emanating from the "
 "endpoint."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3551
+#: src/libslic3r/PrintConfig.cpp:3576
 msgid "Pillar connection mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3552
+#: src/libslic3r/PrintConfig.cpp:3577
 msgid ""
 "Controls the bridge type between two neighboring pillars. Can be zig-zag, "
 "cross (double zig-zag) or dynamic which will automatically switch between "
 "the first two depending on the distance of the two pillars."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3558
+#: src/libslic3r/PrintConfig.cpp:3583
 msgid "Zig-Zag"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3558
+#: src/libslic3r/PrintConfig.cpp:3583
 msgid "Cross"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3558
+#: src/libslic3r/PrintConfig.cpp:3583
 msgid "Dynamic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3570
+#: src/libslic3r/PrintConfig.cpp:3595
 msgid "Pillar widening factor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3574
+#: src/libslic3r/PrintConfig.cpp:3599
 msgid ""
 "Merging bridges or pillars into another pillars can increase the radius. "
 "Zero means no increase, one means full increase. The exact amount of "
 "increase is unspecified and can change in the future."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3585
+#: src/libslic3r/PrintConfig.cpp:3610
 msgid "Support base diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3587
+#: src/libslic3r/PrintConfig.cpp:3612
 msgid "Diameter in mm of the pillar base"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3595
+#: src/libslic3r/PrintConfig.cpp:3620
 msgid "Support base height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3597
+#: src/libslic3r/PrintConfig.cpp:3622
 msgid "The height of the pillar base cone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3604
+#: src/libslic3r/PrintConfig.cpp:3629
 msgid "Support base safety distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3607
+#: src/libslic3r/PrintConfig.cpp:3632
 msgid ""
 "The minimum distance of the pillar base from the model in mm. Makes sense in "
 "zero elevation mode where a gap according to this parameter is inserted "
 "between the model and the pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3617
+#: src/libslic3r/PrintConfig.cpp:3642
 msgid "Critical angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3619
+#: src/libslic3r/PrintConfig.cpp:3644
 msgid "The default angle for connecting support sticks and junctions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3627
+#: src/libslic3r/PrintConfig.cpp:3652
 msgid "Max bridge length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3629
+#: src/libslic3r/PrintConfig.cpp:3654
 msgid "The max length of a bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3641
+#: src/libslic3r/PrintConfig.cpp:3666
 msgid "Max pillar linking distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3643
+#: src/libslic3r/PrintConfig.cpp:3668
 msgid ""
 "The max distance of two pillars to get linked with each other. A zero value "
 "will prohibit pillar cascading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3651 src/slic3r/GUI/Tab.cpp:5339
+#: src/libslic3r/PrintConfig.cpp:3676 src/slic3r/GUI/Tab.cpp:5478
 msgid "Object elevation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3653
+#: src/libslic3r/PrintConfig.cpp:3678
 msgid ""
 "How much the supports should lift up the supported object. If \"Pad around "
 "object\" is enabled, this value is ignored."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3669
+#: src/libslic3r/PrintConfig.cpp:3694
 msgid "Display width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3670
+#: src/libslic3r/PrintConfig.cpp:3695
 msgid "Width of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3675
+#: src/libslic3r/PrintConfig.cpp:3700
 msgid "Display height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3676
+#: src/libslic3r/PrintConfig.cpp:3701
 msgid "Height of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3681
+#: src/libslic3r/PrintConfig.cpp:3706
 msgid "Number of pixels in"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3683
+#: src/libslic3r/PrintConfig.cpp:3708
 msgid "Number of pixels in X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3689
+#: src/libslic3r/PrintConfig.cpp:3714
 msgid "Number of pixels in Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3694
+#: src/libslic3r/PrintConfig.cpp:3719
 msgid "Display horizontal mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3695
+#: src/libslic3r/PrintConfig.cpp:3720
 msgid "Mirror horizontally"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3696
+#: src/libslic3r/PrintConfig.cpp:3721
 msgid "Enable horizontal mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3701
+#: src/libslic3r/PrintConfig.cpp:3726
 msgid "Display vertical mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3702
+#: src/libslic3r/PrintConfig.cpp:3727
 msgid "Mirror vertically"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3703
+#: src/libslic3r/PrintConfig.cpp:3728
 msgid "Enable vertical mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3708
+#: src/libslic3r/PrintConfig.cpp:3733
 msgid "Display orientation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3709
+#: src/libslic3r/PrintConfig.cpp:3734
 msgid ""
 "Set the actual LCD display orientation inside the SLA printer. Portrait mode "
 "will flip the meaning of display width and height parameters and the output "
 "images will be rotated by 90 degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3713
+#: src/libslic3r/PrintConfig.cpp:3738
 msgid "Landscape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3714
+#: src/libslic3r/PrintConfig.cpp:3739
 msgid "Portrait"
 msgstr ""
 
 #. TRN ArrangeDialog: Type of "Geometry handling"
-#: src/libslic3r/PrintConfig.cpp:3720 src/libslic3r/PrintConfig.cpp:4216
+#: src/libslic3r/PrintConfig.cpp:3745 src/libslic3r/PrintConfig.cpp:4241
 #: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:102
 #: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:123
 msgid "Fast"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3721
+#: src/libslic3r/PrintConfig.cpp:3746
 msgid "Fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3722
+#: src/libslic3r/PrintConfig.cpp:3747
 msgid "Time of the fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3729 src/libslic3r/PrintConfig.cpp:4215
+#: src/libslic3r/PrintConfig.cpp:3754 src/libslic3r/PrintConfig.cpp:4240
 msgid "Slow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3730
+#: src/libslic3r/PrintConfig.cpp:3755
 msgid "Slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3731
+#: src/libslic3r/PrintConfig.cpp:3756
 msgid "Time of the slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3738 src/libslic3r/PrintConfig.cpp:4217
+#: src/libslic3r/PrintConfig.cpp:3763 src/libslic3r/PrintConfig.cpp:4242
 msgid "High viscosity"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3739
+#: src/libslic3r/PrintConfig.cpp:3764
 msgid "Tilt for high viscosity resin"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3740
+#: src/libslic3r/PrintConfig.cpp:3765
 msgid "Time of the super slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3747
+#: src/libslic3r/PrintConfig.cpp:3772
 msgid "Area fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3748
+#: src/libslic3r/PrintConfig.cpp:3773
 msgid ""
 "The percentage of the bed area. \n"
 "If the print area exceeds the specified value, \n"
 "then a slow tilt will be used, otherwise - a fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3755 src/libslic3r/PrintConfig.cpp:3756
-#: src/libslic3r/PrintConfig.cpp:3757
+#: src/libslic3r/PrintConfig.cpp:3780 src/libslic3r/PrintConfig.cpp:3781
+#: src/libslic3r/PrintConfig.cpp:3782
 msgid "Printer scaling correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3763 src/libslic3r/PrintConfig.cpp:3765
+#: src/libslic3r/PrintConfig.cpp:3788 src/libslic3r/PrintConfig.cpp:3790
 msgid "Printer scaling correction in X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3764
+#: src/libslic3r/PrintConfig.cpp:3789
 msgid "Printer scaling X axis correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3771 src/libslic3r/PrintConfig.cpp:3773
+#: src/libslic3r/PrintConfig.cpp:3796 src/libslic3r/PrintConfig.cpp:3798
 msgid "Printer scaling correction in Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3772
+#: src/libslic3r/PrintConfig.cpp:3797
 msgid "Printer scaling Y axis correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3779 src/libslic3r/PrintConfig.cpp:3781
+#: src/libslic3r/PrintConfig.cpp:3804 src/libslic3r/PrintConfig.cpp:3806
 msgid "Printer scaling correction in Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3780
+#: src/libslic3r/PrintConfig.cpp:3805
 msgid "Printer scaling Z axis correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3787 src/libslic3r/PrintConfig.cpp:3788
+#: src/libslic3r/PrintConfig.cpp:3812 src/libslic3r/PrintConfig.cpp:3813
 msgid "Printer absolute correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3789
+#: src/libslic3r/PrintConfig.cpp:3814
 msgid ""
 "Will inflate or deflate the sliced 2D polygons according to the sign of the "
 "correction."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3795
+#: src/libslic3r/PrintConfig.cpp:3820
 msgid "Elephant foot minimum width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3797
+#: src/libslic3r/PrintConfig.cpp:3822
 msgid ""
 "Minimum width of features to maintain when doing elephant foot compensation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3804 src/libslic3r/PrintConfig.cpp:3805
+#: src/libslic3r/PrintConfig.cpp:3829 src/libslic3r/PrintConfig.cpp:3830
 msgid "Printer gamma correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3806
+#: src/libslic3r/PrintConfig.cpp:3831
 msgid ""
 "This will apply a gamma correction to the rasterized 2D polygons. A gamma "
 "value of zero means thresholding with the threshold in the middle. This "
 "behaviour eliminates antialiasing without losing holes in polygons."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3825 src/libslic3r/PrintConfig.cpp:3826
+#: src/libslic3r/PrintConfig.cpp:3850 src/libslic3r/PrintConfig.cpp:3851
 msgid "SLA material type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3833 src/libslic3r/PrintConfig.cpp:3834
+#: src/libslic3r/PrintConfig.cpp:3858 src/libslic3r/PrintConfig.cpp:3859
 msgid "Initial layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3840
+#: src/libslic3r/PrintConfig.cpp:3865
 msgid "Idle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3841
+#: src/libslic3r/PrintConfig.cpp:3866
 msgid ""
 "Nozzle temperature when the tool is currently not used in multi-tool setups."
 "This is only used when 'Ooze prevention' is active in Print Settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3849 src/libslic3r/PrintConfig.cpp:3850
+#: src/libslic3r/PrintConfig.cpp:3874 src/libslic3r/PrintConfig.cpp:3875
 msgid "Bottle volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3851
+#: src/libslic3r/PrintConfig.cpp:3876
 msgid "ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3856 src/libslic3r/PrintConfig.cpp:3857
+#: src/libslic3r/PrintConfig.cpp:3881 src/libslic3r/PrintConfig.cpp:3882
 msgid "Bottle weight"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3858
+#: src/libslic3r/PrintConfig.cpp:3883
 msgid "kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3865
+#: src/libslic3r/PrintConfig.cpp:3890
 msgid "g/ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3872
+#: src/libslic3r/PrintConfig.cpp:3897
 msgid "money/bottle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3877
+#: src/libslic3r/PrintConfig.cpp:3902
 msgid "Faded layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3878
+#: src/libslic3r/PrintConfig.cpp:3903
 msgid ""
 "Number of the layers needed for the exposure time fade from initial exposure "
 "time to the exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3885 src/libslic3r/PrintConfig.cpp:3886
+#: src/libslic3r/PrintConfig.cpp:3910 src/libslic3r/PrintConfig.cpp:3911
 msgid "Minimum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3893 src/libslic3r/PrintConfig.cpp:3894
+#: src/libslic3r/PrintConfig.cpp:3918 src/libslic3r/PrintConfig.cpp:3919
 msgid "Maximum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3901 src/libslic3r/PrintConfig.cpp:3902
+#: src/libslic3r/PrintConfig.cpp:3926 src/libslic3r/PrintConfig.cpp:3927
 msgid "Exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3908 src/libslic3r/PrintConfig.cpp:3909
+#: src/libslic3r/PrintConfig.cpp:3933 src/libslic3r/PrintConfig.cpp:3934
 msgid "Minimum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3916 src/libslic3r/PrintConfig.cpp:3917
+#: src/libslic3r/PrintConfig.cpp:3941 src/libslic3r/PrintConfig.cpp:3942
 msgid "Maximum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3924 src/libslic3r/PrintConfig.cpp:3925
+#: src/libslic3r/PrintConfig.cpp:3949 src/libslic3r/PrintConfig.cpp:3950
 msgid "Initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3931 src/libslic3r/PrintConfig.cpp:3932
+#: src/libslic3r/PrintConfig.cpp:3956 src/libslic3r/PrintConfig.cpp:3957
 msgid "Correction for expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3938 src/libslic3r/PrintConfig.cpp:3939
+#: src/libslic3r/PrintConfig.cpp:3963 src/libslic3r/PrintConfig.cpp:3964
 msgid "Correction for expansion in X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3945 src/libslic3r/PrintConfig.cpp:3946
+#: src/libslic3r/PrintConfig.cpp:3970 src/libslic3r/PrintConfig.cpp:3971
 msgid "Correction for expansion in Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3952 src/libslic3r/PrintConfig.cpp:3953
+#: src/libslic3r/PrintConfig.cpp:3977 src/libslic3r/PrintConfig.cpp:3978
 msgid "Correction for expansion in Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3959
+#: src/libslic3r/PrintConfig.cpp:3984
 msgid "SLA print material notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3960
+#: src/libslic3r/PrintConfig.cpp:3985
 msgid "You can put your notes regarding the SLA print material here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3974 src/libslic3r/PrintConfig.cpp:3985
+#: src/libslic3r/PrintConfig.cpp:3999 src/libslic3r/PrintConfig.cpp:4010
 msgid "Default SLA material profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3996
+#: src/libslic3r/PrintConfig.cpp:4021
 msgid "Generate supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3998
+#: src/libslic3r/PrintConfig.cpp:4023
 msgid "Generate supports for the models"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4003
+#: src/libslic3r/PrintConfig.cpp:4028
 msgid "Support tree type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4004
+#: src/libslic3r/PrintConfig.cpp:4029
 msgid "Support tree building strategy"
 msgstr ""
 
 #. TRN One of the "Support tree type"s on SLAPrintSettings : Supports
-#: src/libslic3r/PrintConfig.cpp:4009
+#: src/libslic3r/PrintConfig.cpp:4034
 msgid "Branching (experimental)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4018
+#: src/libslic3r/PrintConfig.cpp:4043
 msgid "Support only in enforced regions"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4020
+#: src/libslic3r/PrintConfig.cpp:4045
 msgid "Only create support if it lies in a support enforcer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4025
+#: src/libslic3r/PrintConfig.cpp:4050
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
 msgid "Support points density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4027
+#: src/libslic3r/PrintConfig.cpp:4052
 msgid "This is a relative measure of support points density."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4033
+#: src/libslic3r/PrintConfig.cpp:4058
 msgid "Minimal distance of the support points"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4035
+#: src/libslic3r/PrintConfig.cpp:4060
 msgid "No support points will be placed closer than this threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4041
+#: src/libslic3r/PrintConfig.cpp:4066
 msgid "Use pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4042 src/libslic3r/PrintConfig.cpp:4049
-#: src/libslic3r/PrintConfig.cpp:4063 src/libslic3r/PrintConfig.cpp:4074
-#: src/libslic3r/PrintConfig.cpp:4084 src/libslic3r/PrintConfig.cpp:4106
-#: src/libslic3r/PrintConfig.cpp:4117 src/libslic3r/PrintConfig.cpp:4124
-#: src/libslic3r/PrintConfig.cpp:4131 src/libslic3r/PrintConfig.cpp:4142
-#: src/libslic3r/PrintConfig.cpp:4151 src/libslic3r/PrintConfig.cpp:4160
-#: src/slic3r/GUI/GUI_Factories.cpp:145 src/slic3r/GUI/Plater.cpp:614
-#: src/slic3r/GUI/Tab.cpp:5273 src/slic3r/GUI/Tab.cpp:5274
-#: src/slic3r/GUI/Tab.cpp:5339
+#: src/libslic3r/PrintConfig.cpp:4067 src/libslic3r/PrintConfig.cpp:4074
+#: src/libslic3r/PrintConfig.cpp:4088 src/libslic3r/PrintConfig.cpp:4099
+#: src/libslic3r/PrintConfig.cpp:4109 src/libslic3r/PrintConfig.cpp:4131
+#: src/libslic3r/PrintConfig.cpp:4142 src/libslic3r/PrintConfig.cpp:4149
+#: src/libslic3r/PrintConfig.cpp:4156 src/libslic3r/PrintConfig.cpp:4167
+#: src/libslic3r/PrintConfig.cpp:4176 src/libslic3r/PrintConfig.cpp:4185
+#: src/slic3r/GUI/GUI_Factories.cpp:145 src/slic3r/GUI/Plater.cpp:617
+#: src/slic3r/GUI/Tab.cpp:5412 src/slic3r/GUI/Tab.cpp:5413
+#: src/slic3r/GUI/Tab.cpp:5478
 msgid "Pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4043
+#: src/libslic3r/PrintConfig.cpp:4068
 msgid "Add a pad underneath the supported model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4048
+#: src/libslic3r/PrintConfig.cpp:4073
 msgid "Pad wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4050
+#: src/libslic3r/PrintConfig.cpp:4075
 msgid "The thickness of the pad and its optional cavity walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4058
+#: src/libslic3r/PrintConfig.cpp:4083
 msgid "Pad wall height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4059
+#: src/libslic3r/PrintConfig.cpp:4084
 msgid ""
 "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
 "when enabling this feature, as some resins may produce an extreme suction "
@@ -4888,129 +4908,129 @@ msgid ""
 "difficult."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4072
+#: src/libslic3r/PrintConfig.cpp:4097
 msgid "Pad brim size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4073
+#: src/libslic3r/PrintConfig.cpp:4098
 msgid "How far should the pad extend around the contained geometry"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4083
+#: src/libslic3r/PrintConfig.cpp:4108
 msgid "Max merge distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4085
+#: src/libslic3r/PrintConfig.cpp:4110
 msgid ""
 "Some objects can get along with a few smaller pads instead of a single big "
 "one. This parameter defines how far the center of two smaller pads should "
 "be. If theyare closer, they will get merged into one pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4105
+#: src/libslic3r/PrintConfig.cpp:4130
 msgid "Pad wall slope"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4107
+#: src/libslic3r/PrintConfig.cpp:4132
 msgid ""
 "The slope of the pad wall relative to the bed plane. 90 degrees means "
 "straight walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4116 src/slic3r/GUI/Tab.cpp:5339
+#: src/libslic3r/PrintConfig.cpp:4141 src/slic3r/GUI/Tab.cpp:5478
 msgid "Pad around object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4118
+#: src/libslic3r/PrintConfig.cpp:4143
 msgid "Create pad around object and ignore the support elevation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4123
+#: src/libslic3r/PrintConfig.cpp:4148
 msgid "Pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4125
+#: src/libslic3r/PrintConfig.cpp:4150
 msgid "Force pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4130
+#: src/libslic3r/PrintConfig.cpp:4155
 msgid "Pad object gap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4132
+#: src/libslic3r/PrintConfig.cpp:4157
 msgid ""
 "The gap between the object bottom and the generated pad in zero elevation "
 "mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4141
+#: src/libslic3r/PrintConfig.cpp:4166
 msgid "Pad object connector stride"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4143
+#: src/libslic3r/PrintConfig.cpp:4168
 msgid ""
 "Distance between two connector sticks which connect the object and the "
 "generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4150
+#: src/libslic3r/PrintConfig.cpp:4175
 msgid "Pad object connector width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4152
+#: src/libslic3r/PrintConfig.cpp:4177
 msgid ""
 "Width of the connector sticks which connect the object and the generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4159
+#: src/libslic3r/PrintConfig.cpp:4184
 msgid "Pad object connector penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4162
+#: src/libslic3r/PrintConfig.cpp:4187
 msgid "How much should the tiny connectors penetrate into the model body."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4169
+#: src/libslic3r/PrintConfig.cpp:4194
 msgid "Enable hollowing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4170 src/libslic3r/PrintConfig.cpp:4177
-#: src/libslic3r/PrintConfig.cpp:4187 src/libslic3r/PrintConfig.cpp:4196
+#: src/libslic3r/PrintConfig.cpp:4195 src/libslic3r/PrintConfig.cpp:4202
+#: src/libslic3r/PrintConfig.cpp:4212 src/libslic3r/PrintConfig.cpp:4221
 #: src/libslic3r/SLA/Hollowing.cpp:86 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:106 src/libslic3r/SLA/Hollowing.cpp:115
-#: src/slic3r/GUI/GUI_Factories.cpp:146 src/slic3r/GUI/Tab.cpp:5291
-#: src/slic3r/GUI/Tab.cpp:5292
+#: src/slic3r/GUI/GUI_Factories.cpp:146 src/slic3r/GUI/Tab.cpp:5430
+#: src/slic3r/GUI/Tab.cpp:5431
 msgid "Hollowing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4171
+#: src/libslic3r/PrintConfig.cpp:4196
 msgid "Hollow out a model to have an empty interior"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4176
+#: src/libslic3r/PrintConfig.cpp:4201
 msgid "Wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4178
+#: src/libslic3r/PrintConfig.cpp:4203
 msgid "Minimum wall thickness of a hollowed model."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4186
+#: src/libslic3r/PrintConfig.cpp:4211
 msgid "Accuracy"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4188
+#: src/libslic3r/PrintConfig.cpp:4213
 msgid ""
 "Performance vs accuracy of calculation. Lower values may produce unwanted "
 "artifacts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4195
+#: src/libslic3r/PrintConfig.cpp:4220
 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
 msgid "Closing distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4198
+#: src/libslic3r/PrintConfig.cpp:4223
 msgid ""
 "Hollowing is done in two steps: first, an imaginary interior is calculated "
 "deeper (offset plus the closing distance) in the object and then it's "
@@ -5019,262 +5039,262 @@ msgid ""
 "most."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4210
+#: src/libslic3r/PrintConfig.cpp:4235
 msgid "Print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4212
+#: src/libslic3r/PrintConfig.cpp:4237
 msgid ""
 "A slower printing profile might be necessary when using materials with "
 "higher viscosity or with some hollowed parts. It slows down the tilt "
 "movement and adds a delay before exposure."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4223
+#: src/libslic3r/PrintConfig.cpp:4248
 msgid "Format of the output SLA archive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4228
+#: src/libslic3r/PrintConfig.cpp:4253
 msgid "SLA output precision"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4229
+#: src/libslic3r/PrintConfig.cpp:4254
 msgid "Minimum resolution in nanometers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4737
+#: src/libslic3r/PrintConfig.cpp:4791
 msgid "Export OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4738
+#: src/libslic3r/PrintConfig.cpp:4792
 msgid "Export the model(s) as OBJ."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4749
+#: src/libslic3r/PrintConfig.cpp:4803
 msgid "Export SLA"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4750
+#: src/libslic3r/PrintConfig.cpp:4804
 msgid "Slice the model and export SLA printing layers as PNG."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4755
+#: src/libslic3r/PrintConfig.cpp:4809
 msgid "Export 3MF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4756
+#: src/libslic3r/PrintConfig.cpp:4810
 msgid "Export the model(s) as 3MF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4760
+#: src/libslic3r/PrintConfig.cpp:4814
 msgid "Export AMF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4761
+#: src/libslic3r/PrintConfig.cpp:4815
 msgid "Export the model(s) as AMF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4765
+#: src/libslic3r/PrintConfig.cpp:4819
 msgid "Export STL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4766
+#: src/libslic3r/PrintConfig.cpp:4820
 msgid "Export the model(s) as STL."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4770 src/slic3r/GUI/KBShortcutsDialog.cpp:100
-#: src/slic3r/GUI/Plater.cpp:973 src/slic3r/GUI/Plater.cpp:7399
+#: src/libslic3r/PrintConfig.cpp:4824 src/slic3r/GUI/KBShortcutsDialog.cpp:100
+#: src/slic3r/GUI/Plater.cpp:976 src/slic3r/GUI/Plater.cpp:7516
 msgid "Export G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4771
+#: src/libslic3r/PrintConfig.cpp:4825
 msgid "Slice the model and export toolpaths as G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4776
+#: src/libslic3r/PrintConfig.cpp:4830
 msgid "G-code viewer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4777
+#: src/libslic3r/PrintConfig.cpp:4831
 msgid "Visualize an already sliced and saved G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4783
+#: src/libslic3r/PrintConfig.cpp:4837
 msgid "OpenGL version"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4784
+#: src/libslic3r/PrintConfig.cpp:4838
 msgid "Select a specific version of OpenGL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4789
+#: src/libslic3r/PrintConfig.cpp:4843
 msgid "OpenGL debug output"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4790
+#: src/libslic3r/PrintConfig.cpp:4844
 msgid "Activate OpenGL debug output on graphic cards which support it"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4796
+#: src/libslic3r/PrintConfig.cpp:4850
 msgid "Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4797
+#: src/libslic3r/PrintConfig.cpp:4851
 msgid ""
 "Slice the model as FFF or SLA based on the printer_technology configuration "
 "value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4802
+#: src/libslic3r/PrintConfig.cpp:4856
 msgid "Help"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4803
+#: src/libslic3r/PrintConfig.cpp:4857
 msgid "Show this help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4808
+#: src/libslic3r/PrintConfig.cpp:4862
 msgid "Help (FFF options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4809
+#: src/libslic3r/PrintConfig.cpp:4863
 msgid "Show the full list of print/G-code configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4813
+#: src/libslic3r/PrintConfig.cpp:4867
 msgid "Help (SLA options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4814
+#: src/libslic3r/PrintConfig.cpp:4868
 msgid "Show the full list of SLA print configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4818
+#: src/libslic3r/PrintConfig.cpp:4872
 msgid "Output Model Info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4819
+#: src/libslic3r/PrintConfig.cpp:4873
 msgid "Write information about the model to the console."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4823
+#: src/libslic3r/PrintConfig.cpp:4877
 msgid "Save config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4824
+#: src/libslic3r/PrintConfig.cpp:4878
 msgid "Save configuration to the specified file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4834
+#: src/libslic3r/PrintConfig.cpp:4888
 msgid "Align XY"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4835
+#: src/libslic3r/PrintConfig.cpp:4889
 msgid "Align the model to the given point."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4839 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1241
+#: src/libslic3r/PrintConfig.cpp:4893 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1242
 msgid "Cut"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4840
+#: src/libslic3r/PrintConfig.cpp:4894
 msgid "Cut model at the given Z."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4861
+#: src/libslic3r/PrintConfig.cpp:4915
 #: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:89
 msgid "Center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4862
+#: src/libslic3r/PrintConfig.cpp:4916
 msgid "Center the print around the given center."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4866
+#: src/libslic3r/PrintConfig.cpp:4920
 msgid "Don't arrange"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4867
+#: src/libslic3r/PrintConfig.cpp:4921
 msgid ""
 "Do not rearrange the given models before merging and keep their original XY "
 "coordinates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4870
+#: src/libslic3r/PrintConfig.cpp:4924
 msgid "Ensure on bed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4871
+#: src/libslic3r/PrintConfig.cpp:4925
 msgid ""
 "Lift the object above the bed when it is partially below. Enabled by "
 "default, use --no-ensure-on-bed to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4875
+#: src/libslic3r/PrintConfig.cpp:4929
 msgid "Duplicate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4876
+#: src/libslic3r/PrintConfig.cpp:4930
 msgid "Multiply copies by this factor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4880
+#: src/libslic3r/PrintConfig.cpp:4934
 msgid "Duplicate by grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4881
+#: src/libslic3r/PrintConfig.cpp:4935
 msgid "Multiply copies by creating a grid."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4884 src/slic3r/GUI/GUI_Factories.cpp:957
+#: src/libslic3r/PrintConfig.cpp:4938 src/slic3r/GUI/GUI_Factories.cpp:957
 #: src/slic3r/GUI/GUI_ObjectList.cpp:2304
 msgid "Merge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4885
+#: src/libslic3r/PrintConfig.cpp:4939
 msgid ""
 "Arrange the supplied models in a plate and merge them in a single model in "
 "order to perform actions once."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4889 src/slic3r/GUI/MainFrame.cpp:1866
+#: src/libslic3r/PrintConfig.cpp:4943 src/slic3r/GUI/MainFrame.cpp:1889
 msgid "Repair"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4890
+#: src/libslic3r/PrintConfig.cpp:4944
 msgid ""
 "Try to repair any non-manifold meshes (this option is implicitly added "
 "whenever we need to slice the model to perform the requested action)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4893
+#: src/libslic3r/PrintConfig.cpp:4947
 #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:569
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:687
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:727
 msgid "Rotate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4894
+#: src/libslic3r/PrintConfig.cpp:4948
 msgid "Rotation angle around the Z axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4898
+#: src/libslic3r/PrintConfig.cpp:4952
 msgid "Rotate around X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4899
+#: src/libslic3r/PrintConfig.cpp:4953
 msgid "Rotation angle around the X axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4903
+#: src/libslic3r/PrintConfig.cpp:4957
 msgid "Rotate around Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4904
+#: src/libslic3r/PrintConfig.cpp:4958
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4908
+#: src/libslic3r/PrintConfig.cpp:4962
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1273
 #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:122
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:254
@@ -5285,52 +5305,52 @@ msgstr ""
 msgid "Scale"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4909
+#: src/libslic3r/PrintConfig.cpp:4963
 msgid "Scaling factor or percentage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4913 src/slic3r/GUI/GUI_Factories.cpp:1079
+#: src/libslic3r/PrintConfig.cpp:4967 src/slic3r/GUI/GUI_Factories.cpp:1079
 #: src/slic3r/GUI/GUI_Factories.cpp:1110
 msgid "Split"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4914
+#: src/libslic3r/PrintConfig.cpp:4968
 msgid ""
 "Detect unconnected parts in the given model(s) and split them into separate "
 "objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4917
+#: src/libslic3r/PrintConfig.cpp:4971
 msgid "Scale to Fit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4918
+#: src/libslic3r/PrintConfig.cpp:4972
 msgid "Scale to fit the given volume."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4922
+#: src/libslic3r/PrintConfig.cpp:4976
 msgid "Delete files after loading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4923
+#: src/libslic3r/PrintConfig.cpp:4977
 msgid "Delete files after loading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4931
+#: src/libslic3r/PrintConfig.cpp:4985
 msgid "Ignore non-existent config files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4932
+#: src/libslic3r/PrintConfig.cpp:4986
 msgid "Do not fail if a file supplied to --load does not exist."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4935
+#: src/libslic3r/PrintConfig.cpp:4989
 msgid ""
 "Forward-compatibility rule when loading configurations from config files and "
 "project files (3MF, AMF)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4936
+#: src/libslic3r/PrintConfig.cpp:4990
 msgid ""
 "This version of PrusaSlicer may not understand configurations produced by "
 "the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
@@ -5338,110 +5358,587 @@ msgid ""
 "substitute an unknown value with a default silently or verbosely."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4940
+#: src/libslic3r/PrintConfig.cpp:4994
 msgid "Bail out on unknown configuration values"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4941
+#: src/libslic3r/PrintConfig.cpp:4995
 msgid ""
 "Enable reading unknown configuration values by verbosely substituting them "
 "with defaults."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4942
+#: src/libslic3r/PrintConfig.cpp:4996
 msgid ""
 "Enable reading unknown configuration values by silently substituting them "
 "with defaults."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4947
+#: src/libslic3r/PrintConfig.cpp:5001
 msgid "Load config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4948
+#: src/libslic3r/PrintConfig.cpp:5002
 msgid ""
 "Load configuration from the specified file. It can be used more than once to "
 "load options from multiple files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4951
+#: src/libslic3r/PrintConfig.cpp:5005
 msgid "Output File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4952
+#: src/libslic3r/PrintConfig.cpp:5006
 msgid ""
 "The file where the output will be written (if not specified, it will be "
 "based on the input file)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4956
+#: src/libslic3r/PrintConfig.cpp:5010
 msgid "Single instance mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4957
+#: src/libslic3r/PrintConfig.cpp:5011
 msgid ""
 "If enabled, the command line arguments are sent to an existing instance of "
 "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
 "the \"single_instance\" configuration value from application preferences."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4962
+#: src/libslic3r/PrintConfig.cpp:5016
 msgid "Data directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4963
+#: src/libslic3r/PrintConfig.cpp:5017
 msgid ""
 "Load and store settings at the given directory. This is useful for "
 "maintaining different profiles or including configurations from a network "
 "storage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4966
+#: src/libslic3r/PrintConfig.cpp:5020
 msgid "Logging level"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4967
+#: src/libslic3r/PrintConfig.cpp:5021
 msgid ""
 "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
 "trace\n"
 "For example. loglevel=2 logs fatal, error and warning level messages."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4973
+#: src/libslic3r/PrintConfig.cpp:5027
 msgid "Render with a software renderer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4974
+#: src/libslic3r/PrintConfig.cpp:5028
 msgid ""
 "Render with a software renderer. The bundled MESA software renderer is "
 "loaded instead of the default OpenGL driver."
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:178
+#: src/libslic3r/PrintConfig.cpp:5055
+msgid "Current z-hop"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5056
+msgid "Contains z-hop present at the beginning of the custom G-code block."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5064
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:239
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:654
+msgid "Position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5065
+msgid ""
+"Position of the extruder at the beginning of the custom G-code block. If the "
+"custom G-code travels somewhere else, it should write to this variable so "
+"PrusaSlicer knows where it travels from when it gets control back."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5069 src/slic3r/GUI/Tab.cpp:1983
+#: src/slic3r/GUI/Tab.cpp:3228
+msgid "Retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5070
+msgid ""
+"Retraction state at the beginning of the custom G-code block. If the custom "
+"G-code moves the extruder axis, it should write to this variable so "
+"PrusaSlicer deretracts correctly when it gets control back."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5074
+msgid "Extra deretraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5075
+msgid "Currently planned extra extruder priming after deretraction."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5078
+msgid "Absolute E position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5079
+msgid ""
+"Current position of the extruder axis. Only used with absolute extruder "
+"addressing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5087
+msgid "Current extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5088
+msgid "Zero-based index of currently used extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5091
+msgid "Current object index"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5092
+msgid ""
+"Specific for sequential printing. Zero-based index of currently printed "
+"object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5095
+msgid "Has single extruder MM priming"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5096
+msgid "Are the extra multi-material priming regions used in this print?"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5099
+msgid "Has wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5100
+msgid "Whether or not wipe tower is being generated in the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5103
+msgid "Initial extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5104
+msgid ""
+"Zero-based index of the first extruder used in the print. Same as "
+"initial_tool."
+msgstr ""
+
+#. TRN: Meaning 'filament type of the initial filament'
+#: src/libslic3r/PrintConfig.cpp:5108
+msgid "Initial filament type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5109
+msgid "String containing filament type of the first used extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5112
+msgid "Initial tool"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5113
+msgid ""
+"Zero-based index of the first extruder used in the print. Same as "
+"initial_extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5116
+msgid "Is extruder used?"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5117
+msgid "Vector of bools stating whether a given extruder is used in the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5125
+msgid "Volume per extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5126
+msgid "Total filament volume extruded per extruder during the entire print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5129 src/libslic3r/PrintConfig.cpp:5137
+msgid "Print time (normal mode)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5130
+msgid ""
+"Estimated print time when printed in normal mode (i.e. not in silent mode). "
+"Same as print_time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5133
+msgid "Number of printing extruders"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5134
+msgid "Number of extruders used during the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5138
+msgid ""
+"Estimated print time when printed in normal mode (i.e. not in silent mode). "
+"Same as normal_print_time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5141
+msgid "Used filament types"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5142
+msgid "Comma-separated list of all filament types used during the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5145
+msgid "Print time (silent mode)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5146
+msgid "Estimated print time when printed in silent mode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5149
+msgid "Total cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5150
+msgid ""
+"Total cost of all material used in the print. Calculated from cost in "
+"Filament Settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5153 src/libslic3r/PrintConfig.cpp:5181
+msgid "Total weight"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5154 src/libslic3r/PrintConfig.cpp:5182
+msgid ""
+"Total weight of the print. Calculated from density in Filament Settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5157
+msgid "Total wipe tower cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5158
+msgid ""
+"Total cost of the material wasted on the wipe tower. Calculated from cost in "
+"Filament Settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5161
+msgid "Wipe tower volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5162
+msgid "Total filament volume extruded on the wipe tower."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5165 src/slic3r/GUI/GCodeViewer.cpp:3776
+#: src/slic3r/GUI/GCodeViewer.cpp:3778 src/slic3r/GUI/GCodeViewer.cpp:4044
+msgid "Used filament"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5166
+msgid "Total length of filament used in the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5169
+msgid "Total number of toolchanges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5170
+msgid "Number of toolchanges during the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5173
+msgid "Total volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5174
+msgid "Total volume of filament used during the entire print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5177
+msgid "Weight per extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5178
+msgid ""
+"Weight per extruder extruded during the entire print. Calculated from "
+"density in Filament Settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5185
+msgid "Total layer count"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5186
+msgid "Number of layers in the entire print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5194
+msgid "Number of objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5195
+msgid "Total number of objects in the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5198
+msgid "Number of instances"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5199
+msgid "Total number of object instances in the print, summed over all objects."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5202
+msgid "Scale per object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5203
+msgid ""
+"Contains a string with the information about what scaling was applied to the "
+"individual objects. Indexing of the objects is zero-based (first object has "
+"index 0).\n"
+"Example: 'x:100% y:50% z:100'."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5208
+msgid "Input filename without extension"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5209
+msgid "Source filename of the first object, without extension."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5216
+msgid ""
+"The vector has two elements: x and y coordinate of the point. Values in mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5217
+msgid ""
+"The vector has two elements: x and y dimension of the bounding box. Values "
+"in mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5220
+msgid "First layer convex hull"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5221
+msgid ""
+"Vector of points of the first layer convex hull. Each element has the "
+"following format: '[x, y]' (x and y are floating-point numbers in mm)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5225
+msgid "Bottom-left corner of first layer bounding box"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5229
+msgid "Top-right corner of first layer bounding box"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5233
+msgid "Size of the first layer bounding box"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5237
+msgid "Bottom-left corner of print bed bounding box"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5241
+msgid "Top-right corner of print bed bounding box"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5245
+msgid "Size of the print bed bounding box"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5254
+msgid "Timestamp"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5255
+msgid "String containing current time in yyyyMMdd-hhmmss format."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5258
+msgid "Year"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5261
+msgid "Month"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5264
+msgid "Day"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5267
+msgid "Hour"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5270
+msgid "Minute"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5273
+msgid "Second"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5281
+msgid "Number of extruders"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5282
+msgid ""
+"Total number of extruders, regardless of whether they are used in the "
+"current print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5285
+msgid "Print preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5286
+msgid "Name of the print preset used for slicing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5289
+msgid "Filament preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5290
+msgid ""
+"Names of the filament presets used for slicing. The variable is a vector "
+"containing one name for each extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5294
+msgid "Printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5295
+msgid "Name of the printer preset used for slicing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5298
+msgid "Physical printer name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5299
+msgid "Name of the physical printer used for slicing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5322
+msgid "Layer number"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5323
+msgid "Zero-based index of the current layer (i.e. first layer is number 0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5326
+msgid "Layer z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5327
+msgid ""
+"Height of the current layer above the print bed, measured to the top of the "
+"layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5330
+msgid "Maximal layer z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5331
+msgid "Height of the last layer above the print bed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5334
+msgid "Current extruder index"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5335
+msgid ""
+"Zero-based index of currently used extruder (i.e. first extruder has index "
+"0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5338
+msgid "Previous extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5339
+msgid ""
+"Index of the extruder that is being unloaded. The index is zero based (first "
+"extruder has index 0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5342
+msgid "Next extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5343
+msgid ""
+"Index of the extruder that is being loaded. The index is zero based (first "
+"extruder has index 0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5346
+msgid "Toolchange z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5347
+msgid ""
+"Height above the print bed when the toolchange takes place. Usually the same "
+"as layer_z, but can be different."
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:180
 msgid "Generating perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:285
+#: src/libslic3r/PrintObject.cpp:287
 msgid "Preparing infill"
 msgstr ""
 
 #. TRN Status for the Print calculation
-#: src/libslic3r/PrintObject.cpp:431
+#: src/libslic3r/PrintObject.cpp:433
 msgid "Making infill"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:480
+#: src/libslic3r/PrintObject.cpp:482
 msgid "Searching support spots"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:505
+#: src/libslic3r/PrintObject.cpp:507
 msgid "Generating support material"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:528
+#: src/libslic3r/PrintObject.cpp:530
 msgid "Estimating curled extrusions"
 msgstr ""
 
+#: src/libslic3r/PrintObject.cpp:551
+msgid "Calculating overhanging perimeters"
+msgstr ""
+
 #: src/libslic3r/PrintObjectSlice.cpp:504
 msgid "Processing triangulated mesh"
 msgstr ""
@@ -5574,23 +6071,23 @@ msgid ""
 "objects printable."
 msgstr ""
 
-#: src/libslic3r/Utils.cpp:1022 src/slic3r/GUI/DoubleSlider.cpp:715
+#: src/libslic3r/Utils.cpp:1035 src/slic3r/GUI/DoubleSlider.cpp:715
 #, possible-boost-format
 msgid "%1%d"
 msgstr ""
 
-#: src/libslic3r/Utils.cpp:1023 src/slic3r/GUI/DoubleSlider.cpp:716
+#: src/libslic3r/Utils.cpp:1036 src/slic3r/GUI/DoubleSlider.cpp:716
 #, possible-boost-format
 msgid "%1%h"
 msgstr ""
 
 #. TRN "m" means "minutes"
-#: src/libslic3r/Utils.cpp:1025 src/slic3r/GUI/DoubleSlider.cpp:717
+#: src/libslic3r/Utils.cpp:1038 src/slic3r/GUI/DoubleSlider.cpp:717
 #, possible-boost-format
 msgid "%1%m"
 msgstr ""
 
-#: src/libslic3r/Utils.cpp:1033 src/slic3r/GUI/DoubleSlider.cpp:718
+#: src/libslic3r/Utils.cpp:1046 src/slic3r/GUI/DoubleSlider.cpp:718
 #, possible-boost-format
 msgid "%1%s"
 msgstr ""
@@ -5734,12 +6231,12 @@ msgid "Reset defaults"
 msgstr ""
 
 #: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:134
-#: src/slic3r/GUI/GLCanvas3D.cpp:5224 src/slic3r/GUI/KBShortcutsDialog.cpp:145
-#: src/slic3r/GUI/Plater.cpp:7326
+#: src/slic3r/GUI/GLCanvas3D.cpp:5229 src/slic3r/GUI/KBShortcutsDialog.cpp:145
+#: src/slic3r/GUI/Plater.cpp:7443
 msgid "Arrange"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:86
 #, possible-c-format, possible-boost-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
@@ -5747,66 +6244,66 @@ msgid ""
 "and we would be glad if you reported it."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:90
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91
 #, possible-boost-format
 msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:92
 msgid ""
 "Please save your project and restart PrusaSlicer. We would be glad if you "
 "reported the issue."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:194
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:169
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:207
 msgid "Slicing complete"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:189
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:202
 #, possible-boost-format
 msgid "Masked SLA file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:298
 msgid "Access violation"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300
 msgid "Illegal instruction"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:289
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:302
 msgid "Divide by zero"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:291
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:304
 msgid "Overflow"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:306
 msgid "Underflow"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:296
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:309
 msgid "Floating reserved operand"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:299
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:312
 msgid "Stack overflow"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:658
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:725
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:671
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738
 msgid "Running post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:689
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:709
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:702
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:722
 msgid "Unknown error occured during exporting G-code."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707
 #, possible-boost-format
 msgid ""
 "Copying of the temporary G-code to the output G-code failed. Maybe the SD "
@@ -5814,7 +6311,7 @@ msgid ""
 "Error message: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710
 #, possible-boost-format
 msgid ""
 "Copying of the temporary G-code to the output G-code failed. There might be "
@@ -5822,40 +6319,40 @@ msgid ""
 "device. The corrupted output G-code is at %1%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:713
 #, possible-boost-format
 msgid ""
 "Renaming of the G-code after copying to the selected destination folder has "
 "failed. Current path is %1%.tmp. Please try exporting again."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:716
 #, possible-boost-format
 msgid ""
 "Copying of the temporary G-code has finished but the original code at %1% "
 "couldn't be opened during copy check. The output G-code is at %2%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:706
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719
 #, possible-boost-format
 msgid ""
 "Copying of the temporary G-code has finished but the exported code couldn't "
 "be opened during copy check. The output G-code is at %1%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:714
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:727
 #, possible-boost-format
 msgid "G-code file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:744
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:770
 #, possible-boost-format
 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
 msgstr ""
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:41
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233 src/slic3r/GUI/Plater.cpp:244
-#: src/slic3r/GUI/Tab.cpp:2974
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233 src/slic3r/GUI/Plater.cpp:247
+#: src/slic3r/GUI/Tab.cpp:3086
 msgid "Size"
 msgstr ""
 
@@ -5893,7 +6390,7 @@ msgstr ""
 msgid "Shape"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:141 src/slic3r/GUI/ConfigWizard.cpp:1823
+#: src/slic3r/GUI/BedShapeDialog.cpp:141 src/slic3r/GUI/ConfigWizard.cpp:1830
 msgid "Bed Shape"
 msgstr ""
 
@@ -5901,8 +6398,8 @@ msgstr ""
 msgid "Load shape from STL..."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:262 src/slic3r/GUI/GCodeViewer.cpp:3990
-#: src/slic3r/GUI/MainFrame.cpp:2262
+#: src/slic3r/GUI/BedShapeDialog.cpp:262 src/slic3r/GUI/GCodeViewer.cpp:4098
+#: src/slic3r/GUI/MainFrame.cpp:2285
 msgid "Settings"
 msgstr ""
 
@@ -5915,7 +6412,7 @@ msgid "Load..."
 msgstr ""
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:305 src/slic3r/GUI/BedShapeDialog.cpp:375
-#: src/slic3r/GUI/Tab.cpp:4270
+#: src/slic3r/GUI/Tab.cpp:4382
 msgid "Remove"
 msgstr ""
 
@@ -6046,12 +6543,12 @@ msgstr ""
 msgid "Default palette for mode markers"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:167 src/slic3r/GUI/GUI_App.cpp:2434
+#: src/slic3r/GUI/ButtonsDescription.cpp:167 src/slic3r/GUI/GUI_App.cpp:2435
 #: src/slic3r/GUI/wxExtensions.cpp:719
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:167 src/slic3r/GUI/GUI_App.cpp:2437
+#: src/slic3r/GUI/ButtonsDescription.cpp:167 src/slic3r/GUI/GUI_App.cpp:2438
 #: src/slic3r/GUI/wxExtensions.cpp:719
 msgid "Expert"
 msgstr ""
@@ -6138,19 +6635,19 @@ msgstr ""
 msgid "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:355
+#: src/slic3r/GUI/ConfigManipulation.cpp:358
 msgid "Head penetration should not be greater than the head width."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:357
+#: src/slic3r/GUI/ConfigManipulation.cpp:360
 msgid "Invalid Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:368
+#: src/slic3r/GUI/ConfigManipulation.cpp:371
 msgid "Pinhead diameter should be smaller than the pillar diameter."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:370
+#: src/slic3r/GUI/ConfigManipulation.cpp:373
 msgid "Invalid pinhead diameter"
 msgstr ""
 
@@ -6178,7 +6675,7 @@ msgstr ""
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:79 src/slic3r/GUI/Tab.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:79 src/slic3r/GUI/Tab.cpp:1350
 msgid "vendor"
 msgstr ""
 
@@ -6234,7 +6731,7 @@ msgstr ""
 #: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/ConfigWizard.cpp:740
 #: src/slic3r/GUI/FileArchiveDialog.cpp:268
 #: src/slic3r/GUI/FileArchiveDialog.cpp:290 src/slic3r/GUI/Preferences.cpp:535
-#: src/slic3r/GUI/Tab.cpp:4355 src/slic3r/GUI/UnsavedChangesDialog.cpp:1170
+#: src/slic3r/GUI/Tab.cpp:4467 src/slic3r/GUI/UnsavedChangesDialog.cpp:1170
 msgid "All"
 msgstr ""
 
@@ -6286,34 +6783,34 @@ msgstr ""
 msgid "Profile:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:809 src/slic3r/GUI/ConfigWizard.cpp:990
-#: src/slic3r/GUI/ConfigWizard.cpp:1076 src/slic3r/GUI/ConfigWizard.cpp:1215
+#: src/slic3r/GUI/ConfigWizard.cpp:819 src/slic3r/GUI/ConfigWizard.cpp:1000
+#: src/slic3r/GUI/ConfigWizard.cpp:1086 src/slic3r/GUI/ConfigWizard.cpp:1225
 msgid "(All)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:813 src/slic3r/GUI/ConfigWizard.cpp:1217
+#: src/slic3r/GUI/ConfigWizard.cpp:823 src/slic3r/GUI/ConfigWizard.cpp:1227
 msgid "(Templates)"
 msgstr ""
 
 #. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
-#: src/slic3r/GUI/ConfigWizard.cpp:839
+#: src/slic3r/GUI/ConfigWizard.cpp:849
 #, possible-boost-format
 msgid ""
 "%1% visible for <b>(\"Template\")</b> printer are universal profiles "
 "available for all printers. These might not be compatible with your printer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:839 src/slic3r/GUI/ConfigWizard.cpp:842
-#: src/slic3r/GUI/ConfigWizard.cpp:2515 src/slic3r/GUI/ConfigWizard.cpp:3472
+#: src/slic3r/GUI/ConfigWizard.cpp:849 src/slic3r/GUI/ConfigWizard.cpp:852
+#: src/slic3r/GUI/ConfigWizard.cpp:2522 src/slic3r/GUI/ConfigWizard.cpp:3390
 msgid "Filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:839 src/slic3r/GUI/ConfigWizard.cpp:842
+#: src/slic3r/GUI/ConfigWizard.cpp:849 src/slic3r/GUI/ConfigWizard.cpp:852
 msgid "SLA materials"
 msgstr ""
 
 #. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
-#: src/slic3r/GUI/ConfigWizard.cpp:842
+#: src/slic3r/GUI/ConfigWizard.cpp:852
 #, possible-boost-format
 msgid ""
 "%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
@@ -6321,24 +6818,24 @@ msgid ""
 msgstr ""
 
 #. TRN ConfigWizard: Materials : "%1%" = "filament"/"SLA material"
-#: src/slic3r/GUI/ConfigWizard.cpp:846
+#: src/slic3r/GUI/ConfigWizard.cpp:856
 #, possible-boost-format
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:870
+#: src/slic3r/GUI/ConfigWizard.cpp:880
 msgid ""
 "Only the following installed printers are compatible with the selected "
 "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:871
+#: src/slic3r/GUI/ConfigWizard.cpp:881
 msgid ""
 "Only the following installed printers are compatible with the selected SLA "
 "materials"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1264
+#: src/slic3r/GUI/ConfigWizard.cpp:1274
 msgid ""
 "You have selected template filament. Please note that these filaments are "
 "available for all printers but are NOT certain to be compatible with your "
@@ -6346,45 +6843,46 @@ msgid ""
 "(This message won't be displayed again.)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1265 src/slic3r/GUI/ConfigWizard.cpp:2825
-#: src/slic3r/GUI/ConfigWizard.cpp:2965 src/slic3r/GUI/DoubleSlider.cpp:2595
+#: src/slic3r/GUI/ConfigWizard.cpp:1275 src/slic3r/GUI/ConfigWizard.cpp:2749
+#: src/slic3r/GUI/ConfigWizard.cpp:2883 src/slic3r/GUI/DoubleSlider.cpp:2595
 #: src/slic3r/GUI/DoubleSlider.cpp:2616 src/slic3r/GUI/GUI.cpp:253
-#: src/slic3r/GUI/GUI_App.cpp:3467 src/slic3r/GUI/UpdateDialogs.cpp:209
+#: src/slic3r/GUI/GUI_App.cpp:3468 src/slic3r/GUI/Plater.cpp:5493
+#: src/slic3r/GUI/Plater.cpp:5545 src/slic3r/GUI/UpdateDialogs.cpp:209
 #: src/slic3r/GUI/UpdateDialogs.cpp:217 src/slic3r/GUI/UpdateDialogs.cpp:222
 #: src/slic3r/GUI/UpdateDialogs.cpp:227 src/slic3r/GUI/UpdateDialogs.cpp:234
 #: src/slic3r/GUI/UpdateDialogs.cpp:239
 msgid "Notice"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1313
+#: src/slic3r/GUI/ConfigWizard.cpp:1320
 msgid "Custom Printer Setup"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1313
+#: src/slic3r/GUI/ConfigWizard.cpp:1320
 msgid "Custom Printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1315
+#: src/slic3r/GUI/ConfigWizard.cpp:1322
 msgid "Define a custom printer profile"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1316
+#: src/slic3r/GUI/ConfigWizard.cpp:1323
 msgid "Custom profile name:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1333
+#: src/slic3r/GUI/ConfigWizard.cpp:1340
 msgid "Automatic updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1333
+#: src/slic3r/GUI/ConfigWizard.cpp:1340
 msgid "Updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1341
+#: src/slic3r/GUI/ConfigWizard.cpp:1348
 msgid "Check for application updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1345
+#: src/slic3r/GUI/ConfigWizard.cpp:1352
 #, possible-c-format, possible-boost-format
 msgid ""
 "If enabled, %s checks for new application versions online. When a new "
@@ -6393,11 +6891,11 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1351 src/slic3r/GUI/Preferences.cpp:296
+#: src/slic3r/GUI/ConfigWizard.cpp:1358 src/slic3r/GUI/Preferences.cpp:296
 msgid "Update built-in Presets automatically"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1355
+#: src/slic3r/GUI/ConfigWizard.cpp:1362
 #, possible-c-format, possible-boost-format
 msgid ""
 "If enabled, %s downloads updates of built-in system presets in the "
@@ -6406,73 +6904,73 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1358
+#: src/slic3r/GUI/ConfigWizard.cpp:1365
 msgid ""
 "Updates are never applied without user's consent and never overwrite user's "
 "customized settings."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1363
+#: src/slic3r/GUI/ConfigWizard.cpp:1370
 msgid ""
 "Additionally a backup snapshot of the whole configuration is created before "
 "an update is applied."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1412 src/slic3r/GUI/Preferences.cpp:1127
+#: src/slic3r/GUI/ConfigWizard.cpp:1419 src/slic3r/GUI/Preferences.cpp:1127
 msgid "Download path"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1417 src/slic3r/GUI/FirmwareDialog.cpp:819
+#: src/slic3r/GUI/ConfigWizard.cpp:1424 src/slic3r/GUI/FirmwareDialog.cpp:819
 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:304
 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:379
 msgid "Browse"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1422
+#: src/slic3r/GUI/ConfigWizard.cpp:1429
 msgid "Choose folder"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1460
+#: src/slic3r/GUI/ConfigWizard.cpp:1467
 msgid "Downloads from URL"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1460
+#: src/slic3r/GUI/ConfigWizard.cpp:1467
 msgid "Downloads"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1468
+#: src/slic3r/GUI/ConfigWizard.cpp:1475
 msgid "Allow built-in downloader"
 msgstr ""
 
 #. TRN ConfigWizard : Downloader : %1% = "printables.com", %2% = "PrusaSlicer"
-#: src/slic3r/GUI/ConfigWizard.cpp:1493
+#: src/slic3r/GUI/ConfigWizard.cpp:1500
 #, possible-boost-format
 msgid ""
 "If enabled, you will be able to open models from the %1% online database "
 "with a single click (using a %2% logo button)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1514
+#: src/slic3r/GUI/ConfigWizard.cpp:1521
 msgid ""
 "On Linux systems the process of registration also creates desktop "
 "integration files for this version of application."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1541
+#: src/slic3r/GUI/ConfigWizard.cpp:1548
 msgid "Chosen directory for downloads does not exist."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1628 src/slic3r/GUI/GUI_Factories.cpp:822
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/ConfigWizard.cpp:1635 src/slic3r/GUI/GUI_Factories.cpp:822
+#: src/slic3r/GUI/Plater.cpp:3794
 msgid "Reload from disk"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1631
+#: src/slic3r/GUI/ConfigWizard.cpp:1638
 msgid ""
 "Export full pathnames of models and parts sources into 3mf and amf files"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1635
+#: src/slic3r/GUI/ConfigWizard.cpp:1642
 msgid ""
 "If enabled, allows the Reload from disk command to automatically find and "
 "load the files when invoked.\n"
@@ -6480,23 +6978,23 @@ msgid ""
 "using an open file dialog."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1644
+#: src/slic3r/GUI/ConfigWizard.cpp:1651
 msgid "Files association"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1646 src/slic3r/GUI/Preferences.cpp:282
+#: src/slic3r/GUI/ConfigWizard.cpp:1653 src/slic3r/GUI/Preferences.cpp:282
 msgid "Associate .3mf files to PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1647 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/ConfigWizard.cpp:1654 src/slic3r/GUI/Preferences.cpp:287
 msgid "Associate .stl files to PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1657
+#: src/slic3r/GUI/ConfigWizard.cpp:1664
 msgid "View mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1659
+#: src/slic3r/GUI/ConfigWizard.cpp:1666
 msgid ""
 "PrusaSlicer's user interfaces comes in three variants:\n"
 "Simple, Advanced, and Expert.\n"
@@ -6505,249 +7003,249 @@ msgid ""
 "fine-tuning, they are suitable for advanced and expert users, respectively."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1664
+#: src/slic3r/GUI/ConfigWizard.cpp:1671
 msgid "Simple mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1665
+#: src/slic3r/GUI/ConfigWizard.cpp:1672
 msgid "Advanced mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1666
+#: src/slic3r/GUI/ConfigWizard.cpp:1673
 msgid "Expert mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1679
+#: src/slic3r/GUI/ConfigWizard.cpp:1686
 msgid "The size of the object can be specified in inches"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1680
+#: src/slic3r/GUI/ConfigWizard.cpp:1687
 msgid "Use inches"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1700
+#: src/slic3r/GUI/ConfigWizard.cpp:1707
 msgid "Other Vendors"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1704
+#: src/slic3r/GUI/ConfigWizard.cpp:1711
 #, possible-c-format, possible-boost-format
 msgid "Pick another vendor supported by %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1745
+#: src/slic3r/GUI/ConfigWizard.cpp:1752
 msgid "Firmware Type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1745 src/slic3r/GUI/Tab.cpp:2573
+#: src/slic3r/GUI/ConfigWizard.cpp:1752 src/slic3r/GUI/Tab.cpp:2650
 msgid "Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1749
+#: src/slic3r/GUI/ConfigWizard.cpp:1756
 msgid "Choose the type of firmware used by your printer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1798 src/slic3r/GUI/ConfigWizard.cpp:1870
-#: src/slic3r/GUI/ConfigWizard.cpp:1875 src/slic3r/GUI/ConfigWizard.cpp:1880
-#: src/slic3r/GUI/Field.cpp:264 src/slic3r/GUI/Field.cpp:334
-#: src/slic3r/GUI/Field.cpp:1593 src/slic3r/GUI/GUI_ObjectLayers.cpp:439
+#: src/slic3r/GUI/ConfigWizard.cpp:1805 src/slic3r/GUI/ConfigWizard.cpp:1877
+#: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:1887
+#: src/slic3r/GUI/Field.cpp:278 src/slic3r/GUI/Field.cpp:348
+#: src/slic3r/GUI/Field.cpp:1583 src/slic3r/GUI/GUI_ObjectLayers.cpp:439
 msgid "Invalid numeric input."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1823
+#: src/slic3r/GUI/ConfigWizard.cpp:1830
 msgid "Bed Shape and Size"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1826
+#: src/slic3r/GUI/ConfigWizard.cpp:1833
 msgid "Set the shape of your printer's bed."
 msgstr ""
 
 #. TRN ConfigWizard : Size of possible print, related on printer size
-#: src/slic3r/GUI/ConfigWizard.cpp:1847
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2363
+#: src/slic3r/GUI/ConfigWizard.cpp:1854
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2369
 msgid "Build Volume"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1850
+#: src/slic3r/GUI/ConfigWizard.cpp:1857
 msgid "Set the printer height."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1905
+#: src/slic3r/GUI/ConfigWizard.cpp:1912
 msgid "Filament and Nozzle Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1905
+#: src/slic3r/GUI/ConfigWizard.cpp:1912
 msgid "Print Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1920
+#: src/slic3r/GUI/ConfigWizard.cpp:1927
 msgid "Enter the diameter of your printer's hot end nozzle."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1923
+#: src/slic3r/GUI/ConfigWizard.cpp:1930
 msgid "Nozzle Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1933
+#: src/slic3r/GUI/ConfigWizard.cpp:1940
 msgid "Enter the diameter of your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1934
+#: src/slic3r/GUI/ConfigWizard.cpp:1941
 msgid ""
 "Good precision is required, so use a caliper and do multiple measurements "
 "along the filament, then compute the average."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1937
+#: src/slic3r/GUI/ConfigWizard.cpp:1944
 msgid "Filament Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1995
+#: src/slic3r/GUI/ConfigWizard.cpp:2002
 msgid "Nozzle and Bed Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1995
+#: src/slic3r/GUI/ConfigWizard.cpp:2002
 msgid "Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2011
+#: src/slic3r/GUI/ConfigWizard.cpp:2018
 msgid "Enter the temperature needed for extruding your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2012
+#: src/slic3r/GUI/ConfigWizard.cpp:2019
 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2015
+#: src/slic3r/GUI/ConfigWizard.cpp:2022
 msgid "Extrusion Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2025
+#: src/slic3r/GUI/ConfigWizard.cpp:2032
 msgid ""
 "Enter the bed temperature needed for getting your filament to stick to your "
 "heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2026
+#: src/slic3r/GUI/ConfigWizard.cpp:2033
 msgid ""
 "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
 "no heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2029
+#: src/slic3r/GUI/ConfigWizard.cpp:2036
 msgid "Bed Temperature"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2515 src/slic3r/GUI/ConfigWizard.cpp:3475
+#: src/slic3r/GUI/ConfigWizard.cpp:2522 src/slic3r/GUI/ConfigWizard.cpp:3393
 msgid "SLA Materials"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2569
+#: src/slic3r/GUI/ConfigWizard.cpp:2576
 msgid "FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2574
+#: src/slic3r/GUI/ConfigWizard.cpp:2581
 msgid "SLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2823
+#: src/slic3r/GUI/ConfigWizard.cpp:2747
 #, possible-boost-format
 msgid ""
 "Following printer profiles has no default filament: %1%Please select one "
 "manually."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2824
+#: src/slic3r/GUI/ConfigWizard.cpp:2748
 #, possible-boost-format
 msgid ""
 "Following printer profiles has no default material: %1%Please select one "
 "manually."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2988
+#: src/slic3r/GUI/ConfigWizard.cpp:2906
 msgid "The following FFF printer models have no filament selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2992
+#: src/slic3r/GUI/ConfigWizard.cpp:2910
 msgid "Do you want to select default filaments for these FFF printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3006
+#: src/slic3r/GUI/ConfigWizard.cpp:2924
 msgid "The following SLA printer models have no materials selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3010
+#: src/slic3r/GUI/ConfigWizard.cpp:2928
 msgid "Do you want to select default SLA materials for these printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3052
+#: src/slic3r/GUI/ConfigWizard.cpp:2970
 msgid "Configuration is edited in ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3105
+#: src/slic3r/GUI/ConfigWizard.cpp:3023
 msgid "All user presets will be deleted."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3142
+#: src/slic3r/GUI/ConfigWizard.cpp:3060
 msgid "A new vendor was installed and one of its printers will be activated"
 msgid_plural ""
 "New vendors were installed and one of theirs printers will be activated"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3174
+#: src/slic3r/GUI/ConfigWizard.cpp:3092
 msgid "Do you want to continue changing the configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3241
+#: src/slic3r/GUI/ConfigWizard.cpp:3159
 msgid "A new Printer was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3246
+#: src/slic3r/GUI/ConfigWizard.cpp:3164
 msgid "Some Printers were uninstalled."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3267
+#: src/slic3r/GUI/ConfigWizard.cpp:3185
 msgid "A new filament was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3268
+#: src/slic3r/GUI/ConfigWizard.cpp:3186
 msgid "A new SLA material was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3281
+#: src/slic3r/GUI/ConfigWizard.cpp:3199
 msgid "Some filaments were uninstalled."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3281
+#: src/slic3r/GUI/ConfigWizard.cpp:3199
 msgid "Some SLA materials were uninstalled."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3325
+#: src/slic3r/GUI/ConfigWizard.cpp:3243
 msgid "Custom printer was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3418
+#: src/slic3r/GUI/ConfigWizard.cpp:3336
 msgid "Select all standard printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3421
+#: src/slic3r/GUI/ConfigWizard.cpp:3339
 msgid "< &Back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3422
+#: src/slic3r/GUI/ConfigWizard.cpp:3340
 msgid "&Next >"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3423
+#: src/slic3r/GUI/ConfigWizard.cpp:3341
 msgid "&Finish"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3424
+#: src/slic3r/GUI/ConfigWizard.cpp:3342
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:662
 #: src/slic3r/GUI/FileArchiveDialog.cpp:281
 #: src/slic3r/GUI/FileArchiveDialog.cpp:290
 #: src/slic3r/GUI/FirmwareDialog.cpp:157
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2346
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2352
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2400
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2489
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
@@ -6755,44 +7253,44 @@ msgstr ""
 #: src/slic3r/GUI/ProgressStatusBar.cpp:34
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:100
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:915
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1617
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1615
 msgid "Cancel"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3444
+#: src/slic3r/GUI/ConfigWizard.cpp:3362
 msgid "Prusa FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3452
+#: src/slic3r/GUI/ConfigWizard.cpp:3370
 msgid "Prusa MSLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3472
+#: src/slic3r/GUI/ConfigWizard.cpp:3390
 msgid "Filament Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3472 src/slic3r/GUI/ConfigWizard.cpp:3475
+#: src/slic3r/GUI/ConfigWizard.cpp:3390 src/slic3r/GUI/ConfigWizard.cpp:3393
 #: src/slic3r/GUI/GUI_ObjectList.cpp:4357
 msgid "Type:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3475
+#: src/slic3r/GUI/ConfigWizard.cpp:3393
 msgid "SLA Material Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3598
+#: src/slic3r/GUI/ConfigWizard.cpp:3516
 msgid "Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3599
+#: src/slic3r/GUI/ConfigWizard.cpp:3517
 msgid "Configuration &Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3601
+#: src/slic3r/GUI/ConfigWizard.cpp:3519
 msgid "Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3602
+#: src/slic3r/GUI/ConfigWizard.cpp:3520
 msgid "Configuration &Wizard"
 msgstr ""
 
@@ -6836,7 +7334,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:631
-#: src/slic3r/GUI/GUI_App.cpp:2419
+#: src/slic3r/GUI/GUI_App.cpp:2420
 msgid "Desktop Integration"
 msgstr ""
 
@@ -6852,8 +7350,8 @@ msgid "Perform"
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:658
-#: src/slic3r/GUI/GLCanvas3D.cpp:5405 src/slic3r/GUI/KBShortcutsDialog.cpp:110
-#: src/slic3r/GUI/MainFrame.cpp:1447
+#: src/slic3r/GUI/GLCanvas3D.cpp:5410 src/slic3r/GUI/KBShortcutsDialog.cpp:110
+#: src/slic3r/GUI/MainFrame.cpp:1477
 msgid "Undo"
 msgstr ""
 
@@ -7138,7 +7636,7 @@ msgstr ""
 msgid "This action will cause deletion of all ticks on vertical slider."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2160 src/slic3r/GUI/Tab.cpp:1294
+#: src/slic3r/GUI/DoubleSlider.cpp:2160 src/slic3r/GUI/Tab.cpp:1302
 msgid ""
 "This action is not revertible.\n"
 "Do you want to proceed?"
@@ -7237,6 +7735,94 @@ msgstr ""
 msgid "Can't create file at %1%"
 msgstr ""
 
+#. TRN: This is title of a dialog. The argument is the name of the currently edited custom G-code.
+#: src/slic3r/GUI/EditGCodeDialog.cpp:37
+#, possible-boost-format
+msgid "Edit Custom G-code (%1%)"
+msgstr ""
+
+#. TRN this word-combination is a part of phraze "For more information about placeholders and its use visit our help page"
+#: src/slic3r/GUI/EditGCodeDialog.cpp:58
+msgid "help page"
+msgstr ""
+
+#. TRN ConfigWizard : Downloader : %1% = "help page"
+#: src/slic3r/GUI/EditGCodeDialog.cpp:61
+#, possible-boost-format
+msgid "For more information about placeholders and its use visit our %1%."
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:78
+msgid "Built-in placeholders (Double click item to add to G-code)"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:88
+msgid "Add selected placeholder to G-code"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:107
+msgid "Select placeholder"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:162
+msgid "[Global] Slicing State"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:164
+msgid "Read Only"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:170
+msgid "Read Write"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:178
+msgid "Slicing State"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:189
+msgid "Print Statistics"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:197
+msgid "Objects Info"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:205
+msgid "Dimensions"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:213
+msgid "Timestamps"
+msgstr ""
+
+#. TRN: The argument is the name of currently edited custom gcode. The string starts a section of placeholders only available in this gcode.
+#: src/slic3r/GUI/EditGCodeDialog.cpp:223
+#, possible-boost-format
+msgid "Specific for %1%"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:254
+msgid "Presets"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:256 src/slic3r/GUI/GCodeViewer.cpp:4115
+#: src/slic3r/GUI/GUI.cpp:336 src/slic3r/GUI/Plater.cpp:876
+msgid "Print settings"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:261
+msgid "Filament settings"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:261
+msgid "SLA Materials settings"
+msgstr ""
+
+#: src/slic3r/GUI/EditGCodeDialog.cpp:266
+msgid "Printer settings"
+msgstr ""
+
 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:30
 msgid "Set extruder sequence"
 msgstr ""
@@ -7273,43 +7859,43 @@ msgstr ""
 msgid "Add extruder to sequence"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:194
+#: src/slic3r/GUI/Field.cpp:208
 msgid "default value"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:197
+#: src/slic3r/GUI/Field.cpp:211
 msgid "parameter name"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:212 src/slic3r/GUI/OptionsGroup.cpp:864
+#: src/slic3r/GUI/Field.cpp:226 src/slic3r/GUI/OptionsGroup.cpp:872
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1083
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1095
 msgid "N/A"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:235 src/slic3r/GUI/Field.cpp:308
+#: src/slic3r/GUI/Field.cpp:249 src/slic3r/GUI/Field.cpp:322
 #, possible-c-format, possible-boost-format
 msgid "%s doesn't support percentage"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:275
+#: src/slic3r/GUI/Field.cpp:289
 #, possible-c-format, possible-boost-format
 msgid ""
 "Input value is out of range\n"
 "Are you sure that %s is a correct value and that you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:278 src/slic3r/GUI/Field.cpp:354
+#: src/slic3r/GUI/Field.cpp:292 src/slic3r/GUI/Field.cpp:368
 msgid "Parameter validation"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:291 src/slic3r/GUI/Field.cpp:401
-#: src/slic3r/GUI/Field.cpp:1605
+#: src/slic3r/GUI/Field.cpp:305 src/slic3r/GUI/Field.cpp:389
+#: src/slic3r/GUI/Field.cpp:1595
 msgid "Input value is out of range"
 msgstr ""
 
 #. TRN %1% = Value, %2% = units
-#: src/slic3r/GUI/Field.cpp:351
+#: src/slic3r/GUI/Field.cpp:365
 #, possible-boost-format
 msgid ""
 "Do you mean %1%%% instead of %1% %2%?\n"
@@ -7317,13 +7903,17 @@ msgid ""
 "or NO if you are sure that %1% %2% is a correct value."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:408
+#: src/slic3r/GUI/Field.cpp:385
 #, possible-boost-format
 msgid ""
 "Invalid input format. Expected vector of dimensions in the following format: "
 "\"%1%\""
 msgstr ""
 
+#: src/slic3r/GUI/Field.cpp:394
+msgid "Some extension in the input is invalid"
+msgstr ""
+
 #: src/slic3r/GUI/FileArchiveDialog.cpp:174
 msgid "Archive preview"
 msgstr ""
@@ -7459,7 +8049,7 @@ msgstr ""
 msgid "Cancelling..."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:73 src/slic3r/GUI/MainFrame.cpp:1509
+#: src/slic3r/GUI/GalleryDialog.cpp:73 src/slic3r/GUI/MainFrame.cpp:1539
 msgid "Shape Gallery"
 msgstr ""
 
@@ -7467,7 +8057,7 @@ msgstr ""
 msgid "Select shape from the gallery"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/Tab.cpp:4809
 msgid "Add"
 msgstr ""
 
@@ -7476,8 +8066,8 @@ msgid "Add one or more custom shapes"
 msgstr ""
 
 #: src/slic3r/GUI/GalleryDialog.cpp:119 src/slic3r/GUI/GalleryDialog.cpp:537
-#: src/slic3r/GUI/GLCanvas3D.cpp:5206 src/slic3r/GUI/GUI_Factories.cpp:464
-#: src/slic3r/GUI/Tab.cpp:4270
+#: src/slic3r/GUI/GLCanvas3D.cpp:5211 src/slic3r/GUI/GUI_Factories.cpp:464
+#: src/slic3r/GUI/Tab.cpp:4382
 msgid "Delete"
 msgstr ""
 
@@ -7531,22 +8121,22 @@ msgstr ""
 msgid "Tool position"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1562
+#: src/slic3r/GUI/GCodeViewer.cpp:1660
 msgid "Generating toolpaths"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1630
+#: src/slic3r/GUI/GCodeViewer.cpp:1728
 msgid "Generating vertex buffer"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1990
+#: src/slic3r/GUI/GCodeViewer.cpp:2088
 msgid "Generating index buffers"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3343 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:248
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:557
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:577
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2355
+#: src/slic3r/GUI/GCodeViewer.cpp:3443 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:249
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:558
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:578
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2361
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1226
 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1992
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
@@ -7556,210 +8146,201 @@ msgstr ""
 msgid "in"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3344
+#: src/slic3r/GUI/GCodeViewer.cpp:3444
 msgctxt "Metre"
 msgid "m"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3355
+#: src/slic3r/GUI/GCodeViewer.cpp:3455
 msgid "Click to hide"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3355
+#: src/slic3r/GUI/GCodeViewer.cpp:3455
 msgid "Click to show"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3528
+#: src/slic3r/GUI/GCodeViewer.cpp:3628
 msgid "up to"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3534
+#: src/slic3r/GUI/GCodeViewer.cpp:3634
 msgid "above"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3542
+#: src/slic3r/GUI/GCodeViewer.cpp:3642
 msgid "from"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3542
+#: src/slic3r/GUI/GCodeViewer.cpp:3642
 msgid "to"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3592 src/slic3r/GUI/GCodeViewer.cpp:3593
-#: src/slic3r/GUI/GCodeViewer.cpp:3668
+#: src/slic3r/GUI/GCodeViewer.cpp:3692 src/slic3r/GUI/GCodeViewer.cpp:3693
+#: src/slic3r/GUI/GCodeViewer.cpp:3776
 msgid "Percentage"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3603 src/slic3r/GUI/GCodeViewer.cpp:3646
+#: src/slic3r/GUI/GCodeViewer.cpp:3703 src/slic3r/GUI/GCodeViewer.cpp:3749
+#: src/slic3r/GUI/GCodeViewer.cpp:3755
 msgid "Feature type"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3603 src/slic3r/GUI/GCodeViewer.cpp:3668
+#: src/slic3r/GUI/GCodeViewer.cpp:3703 src/slic3r/GUI/GCodeViewer.cpp:3776
 #: src/slic3r/GUI/RammingChart.cpp:94
 msgid "Time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3647
+#: src/slic3r/GUI/GCodeViewer.cpp:3749 src/slic3r/GUI/GCodeViewer.cpp:3755
 msgid "Height (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3648
+#: src/slic3r/GUI/GCodeViewer.cpp:3749 src/slic3r/GUI/GCodeViewer.cpp:3755
 msgid "Width (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3649
+#: src/slic3r/GUI/GCodeViewer.cpp:3749 src/slic3r/GUI/GCodeViewer.cpp:3755
 msgid "Speed (mm/s)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3650
+#: src/slic3r/GUI/GCodeViewer.cpp:3749 src/slic3r/GUI/GCodeViewer.cpp:3755
 msgid "Fan speed (%)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3651
+#: src/slic3r/GUI/GCodeViewer.cpp:3750 src/slic3r/GUI/GCodeViewer.cpp:3756
 msgid "Temperature (°C)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3652
+#: src/slic3r/GUI/GCodeViewer.cpp:3750 src/slic3r/GUI/GCodeViewer.cpp:3756
 msgid "Volumetric flow rate (mm³/s)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3653
+#: src/slic3r/GUI/GCodeViewer.cpp:3750
 msgid "Layer time (linear)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3654
+#: src/slic3r/GUI/GCodeViewer.cpp:3750
 msgid "Layer time (logarithmic)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3655
+#: src/slic3r/GUI/GCodeViewer.cpp:3751 src/slic3r/GUI/GCodeViewer.cpp:3756
 msgid "Tool"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3656
+#: src/slic3r/GUI/GCodeViewer.cpp:3751 src/slic3r/GUI/GCodeViewer.cpp:3756
 msgid "Color Print"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3668 src/slic3r/GUI/GCodeViewer.cpp:3670
-#: src/slic3r/GUI/GCodeViewer.cpp:3936
-msgid "Used filament"
-msgstr ""
-
-#: src/slic3r/GUI/GCodeViewer.cpp:3738
+#: src/slic3r/GUI/GCodeViewer.cpp:3846
 msgid "Default color"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3761
+#: src/slic3r/GUI/GCodeViewer.cpp:3869
 msgid "default color"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3861 src/slic3r/GUI/GCodeViewer.cpp:3917
+#: src/slic3r/GUI/GCodeViewer.cpp:3969 src/slic3r/GUI/GCodeViewer.cpp:4025
 msgid "Color change"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3880 src/slic3r/GUI/GCodeViewer.cpp:3915
+#: src/slic3r/GUI/GCodeViewer.cpp:3988 src/slic3r/GUI/GCodeViewer.cpp:4023
 msgid "Print"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3916 src/slic3r/GUI/GCodeViewer.cpp:3950
+#: src/slic3r/GUI/GCodeViewer.cpp:4024 src/slic3r/GUI/GCodeViewer.cpp:4058
 msgid "Pause"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3933 src/slic3r/GUI/GCodeViewer.cpp:3936
+#: src/slic3r/GUI/GCodeViewer.cpp:4041 src/slic3r/GUI/GCodeViewer.cpp:4044
 msgid "Event"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3933 src/slic3r/GUI/GCodeViewer.cpp:3936
+#: src/slic3r/GUI/GCodeViewer.cpp:4041 src/slic3r/GUI/GCodeViewer.cpp:4044
 msgid "Remaining time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3933 src/slic3r/GUI/GCodeViewer.cpp:3936
+#: src/slic3r/GUI/GCodeViewer.cpp:4041 src/slic3r/GUI/GCodeViewer.cpp:4044
 msgid "Duration"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4007 src/slic3r/GUI/GUI.cpp:336
-#: src/slic3r/GUI/Plater.cpp:873
-msgid "Print settings"
-msgstr ""
-
-#: src/slic3r/GUI/GCodeViewer.cpp:4012 src/slic3r/GUI/GUI.cpp:338
-#: src/slic3r/GUI/Plater.cpp:874 src/slic3r/GUI/Tab.cpp:2052
-#: src/slic3r/GUI/Tab.cpp:2053
+#: src/slic3r/GUI/GCodeViewer.cpp:4120 src/slic3r/GUI/GUI.cpp:338
+#: src/slic3r/GUI/Plater.cpp:877 src/slic3r/GUI/Tab.cpp:2127
+#: src/slic3r/GUI/Tab.cpp:2128
 msgid "Filament"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4027
+#: src/slic3r/GUI/GCodeViewer.cpp:4135
 msgid "Hide Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4027
+#: src/slic3r/GUI/GCodeViewer.cpp:4135
 msgid "Show Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4040
+#: src/slic3r/GUI/GCodeViewer.cpp:4148
 msgid "Estimated printing times"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4059
+#: src/slic3r/GUI/GCodeViewer.cpp:4167
 msgid "Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4060
+#: src/slic3r/GUI/GCodeViewer.cpp:4168
 msgid "Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4073
+#: src/slic3r/GUI/GCodeViewer.cpp:4181
 msgid "Total"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4092
+#: src/slic3r/GUI/GCodeViewer.cpp:4200
 msgid "Show stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4096
+#: src/slic3r/GUI/GCodeViewer.cpp:4204
 msgid "Show normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4150
+#: src/slic3r/GUI/GCodeViewer.cpp:4258
 msgid "Wipe"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4154
+#: src/slic3r/GUI/GCodeViewer.cpp:4262
 msgid "Retractions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4158
+#: src/slic3r/GUI/GCodeViewer.cpp:4266
 msgid "Deretractions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4162
+#: src/slic3r/GUI/GCodeViewer.cpp:4270
 msgid "Seams"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4166
+#: src/slic3r/GUI/GCodeViewer.cpp:4274
 msgid "Tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4170
+#: src/slic3r/GUI/GCodeViewer.cpp:4278
 msgid "Color changes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4174
+#: src/slic3r/GUI/GCodeViewer.cpp:4282
 msgid "Print pauses"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4178
+#: src/slic3r/GUI/GCodeViewer.cpp:4286
 msgid "Custom G-codes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4182
+#: src/slic3r/GUI/GCodeViewer.cpp:4290
 msgid "Center of gravity"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4187
+#: src/slic3r/GUI/GCodeViewer.cpp:4295
 msgid "Shells"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4192
+#: src/slic3r/GUI/GCodeViewer.cpp:4300
 msgid "Tool marker"
 msgstr ""
 
@@ -7847,264 +8428,277 @@ msgid "Depth"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:234
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1034
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:655
+#: src/slic3r/GUI/Mouse3DController.cpp:483
+#: src/slic3r/GUI/Mouse3DController.cpp:504
+msgid "Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
 msgid "Groove"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:236
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:237
 msgid "Flap Angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:237
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
 msgid "Groove Angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:251
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2706
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:252
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2719
 #: src/slic3r/GUI/GUI_ObjectList.cpp:4143
 #: src/slic3r/GUI/GUI_ObjectList.cpp:4335
 msgid "Part"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:251
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2706
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:252
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2719
 msgid "Object"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:267
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:268
 msgid ""
 "Click to flip the cut plane\n"
 "Drag to move the cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:269
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:270
 msgid ""
 "Click to flip the cut plane\n"
 "Drag to move the cut plane\n"
 "Right-click a part to assign it to the other side"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:416
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:626
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1662
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:417
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:627
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1663
 msgid "Move cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:521 src/slic3r/GUI/GUI_App.cpp:2442
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:522 src/slic3r/GUI/GUI_App.cpp:2443
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:524
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:525
 msgid "Change cut mode"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:597
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:598
 msgid "Value"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:604
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:605
 msgid "Tolerance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1179
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1182
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1180
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1183
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1184
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1276
 msgid "Left click"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1179
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3508
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1180
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3529
 msgid "Add connector"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1180
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1181
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273
 msgid "Right click"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1180
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1181
 msgid "Remove connector"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1181
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1182
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1277
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
 msgid "Drag"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1181
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1646
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1182
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1647
 msgid "Move connector"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1182
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1183
 msgid "Add connector to selection"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1183
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1184
 msgid "Remove connector from selection"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1184
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1185
 msgid "Select all connectors"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1657
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1658
 msgid "Rotate cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2281
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2282
 msgid "Remove connectors"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2333
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2339
 msgid "Bulge"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2333
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2339
 msgid "Bulge proportion related to radius"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2334
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2340
 msgid "Space"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2334
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2340
 msgid "Space proportion related to radius"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2339
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2345
 msgid "Confirm connectors"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2408
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2467
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2414
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2473
 msgid "Flip cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2509
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2559
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2515
 msgid "Groove change"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2521
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2570
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2608 src/slic3r/GUI/GLCanvas3D.cpp:269
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2527
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2578
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2621 src/slic3r/GUI/GLCanvas3D.cpp:269
 msgid "Reset"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2630
-msgid "Hold SHIFT key to draw a cut line"
+#. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'.
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2566
+msgid "Edited"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2643
+msgid "Hold SHIFT key to draw a cut line"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2656
 msgid "Cut position"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2650
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2663
 msgid "Reset cutting plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2663
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2676
 msgid "Edit connectors"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2663
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2676
 msgid "Add connectors"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2670
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2683
 msgid "Reset cut"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2671
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2684
 msgid "Reset cutting plane and remove connectors"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2736
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2749
 msgid "Cut result"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2756
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2769
 msgid "Cut into"
 msgstr ""
 
 #. TRN CutGizmo: RadioButton Cut into ...
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2763
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2776
 msgid "Objects"
 msgstr ""
 
 #. TRN CutGizmo: RadioButton Cut into ...
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2767
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2780
 msgid "Parts"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2781
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2794
 msgid "Perform cut"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2877
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2897
 msgid "Invalid connectors detected"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2879
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2899
 #, possible-c-format, possible-boost-format
 msgid "%1$d connector is out of cut contour"
 msgid_plural "%1$d connectors are out of cut contour"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2882
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2902
 #, possible-c-format, possible-boost-format
 msgid "%1$d connector is out of object"
 msgid_plural "%1$d connectors are out of object"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2885
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2905
 msgid "Some connectors are overlapped"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2889
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2909
 msgid "Select at least one object to keep after cutting."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2891
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2911
 msgid "Cut plane is placed out of object"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2893
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2913
 msgid "Cut plane with groove is invalid"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3195
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3216
 msgid "Connector"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3264
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3285
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3478
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3499
 msgid "Cut by line"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3534
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3556
 msgid "Delete connector"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:330
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:332
 msgid "Entering Cut gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:331
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:333
 msgid "Leaving Cut gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:332
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:334
 msgid "Cut gizmo editing"
 msgstr ""
 
@@ -8152,14 +8746,6 @@ msgstr ""
 msgid "From surface"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1034
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:655
-#: src/slic3r/GUI/Mouse3DController.cpp:483
-#: src/slic3r/GUI/Mouse3DController.cpp:504
-msgid "Rotation"
-msgstr ""
-
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1035
 msgid "Collection"
 msgstr ""
@@ -8235,7 +8821,7 @@ msgid "No symbol"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1994
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1614 src/slic3r/GUI/Plater.cpp:2467
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1614 src/slic3r/GUI/Plater.cpp:2470
 msgid "Loading"
 msgstr ""
 
@@ -8825,7 +9411,7 @@ msgid "Paint-on supports editing"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:37
-#: src/slic3r/GUI/GLCanvas3D.cpp:4100
+#: src/slic3r/GUI/GLCanvas3D.cpp:4105
 msgid "Gizmo-Place on Face"
 msgstr ""
 
@@ -9110,12 +9696,12 @@ msgstr ""
 msgid "Move"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:82 src/slic3r/GUI/GLCanvas3D.cpp:3112
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:82 src/slic3r/GUI/GLCanvas3D.cpp:3117
 msgid "Gizmo-Move"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:587
-#: src/slic3r/GUI/GLCanvas3D.cpp:3204
+#: src/slic3r/GUI/GLCanvas3D.cpp:3209
 msgid "Gizmo-Rotate"
 msgstr ""
 
@@ -9186,7 +9772,9 @@ msgid "Simplification is currently only allowed when a single part is selected"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:195
-#: src/slic3r/GUI/MainFrame.cpp:1267 src/slic3r/GUI/MainFrame.cpp:1738
+#: src/slic3r/GUI/MainFrame.cpp:1288 src/slic3r/GUI/MainFrame.cpp:1761
+#: src/slic3r/GUI/Plater.cpp:5484 src/slic3r/GUI/Plater.cpp:5501
+#: src/slic3r/GUI/Plater.cpp:5536 src/slic3r/GUI/Plater.cpp:5553
 #: src/slic3r/GUI/PrintHostDialogs.cpp:429
 msgid "Error"
 msgstr ""
@@ -9414,7 +10002,7 @@ msgid ""
 "changes first."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:199 src/slic3r/GUI/GLCanvas3D.cpp:5352
+#: src/slic3r/GUI/GLCanvas3D.cpp:199 src/slic3r/GUI/GLCanvas3D.cpp:5357
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:76
 msgid "Variable layer height"
 msgstr ""
@@ -9511,162 +10099,162 @@ msgstr ""
 msgid "Variable layer height - Smooth all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2196
+#: src/slic3r/GUI/GLCanvas3D.cpp:2201
 msgid "Mirror Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3848
+#: src/slic3r/GUI/GLCanvas3D.cpp:3853
 msgid "Move Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4484 src/slic3r/GUI/GLCanvas3D.cpp:5312
+#: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/GLCanvas3D.cpp:5317
 msgid "Switch to Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4485 src/slic3r/GUI/GLCanvas3D.cpp:5312
+#: src/slic3r/GUI/GLCanvas3D.cpp:4490 src/slic3r/GUI/GLCanvas3D.cpp:5317
 msgid "Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4486 src/slic3r/GUI/GLCanvas3D.cpp:5313
+#: src/slic3r/GUI/GLCanvas3D.cpp:4491 src/slic3r/GUI/GLCanvas3D.cpp:5318
 msgid "Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4486 src/slic3r/GUI/GLCanvas3D.cpp:5313
+#: src/slic3r/GUI/GLCanvas3D.cpp:4491 src/slic3r/GUI/GLCanvas3D.cpp:5318
 msgid "Material Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4487 src/slic3r/GUI/GLCanvas3D.cpp:5314
+#: src/slic3r/GUI/GLCanvas3D.cpp:4492 src/slic3r/GUI/GLCanvas3D.cpp:5319
 msgid "Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4711
+#: src/slic3r/GUI/GLCanvas3D.cpp:4716
 msgid "Undo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4711
+#: src/slic3r/GUI/GLCanvas3D.cpp:4716
 msgid "Redo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4731
+#: src/slic3r/GUI/GLCanvas3D.cpp:4736
 #, possible-c-format, possible-boost-format
 msgid "Undo %1$d Action"
 msgid_plural "Undo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4731
+#: src/slic3r/GUI/GLCanvas3D.cpp:4736
 #, possible-c-format, possible-boost-format
 msgid "Redo %1$d Action"
 msgid_plural "Redo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4750 src/slic3r/GUI/GLCanvas3D.cpp:5330
+#: src/slic3r/GUI/GLCanvas3D.cpp:4755 src/slic3r/GUI/GLCanvas3D.cpp:5335
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 src/slic3r/GUI/Search.cpp:486
 msgid "Search"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4764 src/slic3r/GUI/GLCanvas3D.cpp:4772
+#: src/slic3r/GUI/GLCanvas3D.cpp:4769 src/slic3r/GUI/GLCanvas3D.cpp:4777
 #: src/slic3r/GUI/Search.cpp:492
 msgid "Enter a search term"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5198
+#: src/slic3r/GUI/GLCanvas3D.cpp:5203
 msgid "Add..."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5215 src/slic3r/GUI/KBShortcutsDialog.cpp:109
-#: src/slic3r/GUI/Plater.cpp:6133 src/slic3r/GUI/Tab.cpp:4680
+#: src/slic3r/GUI/GLCanvas3D.cpp:5220 src/slic3r/GUI/KBShortcutsDialog.cpp:109
+#: src/slic3r/GUI/Plater.cpp:6250 src/slic3r/GUI/Tab.cpp:4815
 msgid "Delete all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5224 src/slic3r/GUI/KBShortcutsDialog.cpp:146
+#: src/slic3r/GUI/GLCanvas3D.cpp:5229 src/slic3r/GUI/KBShortcutsDialog.cpp:146
 msgid "Arrange selection"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5224
+#: src/slic3r/GUI/GLCanvas3D.cpp:5229
 msgid "Click right mouse button to show arrangement options"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5244
+#: src/slic3r/GUI/GLCanvas3D.cpp:5249
 msgid "Copy"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5253
+#: src/slic3r/GUI/GLCanvas3D.cpp:5258
 msgid "Paste"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5265 src/slic3r/GUI/GUI_Factories.cpp:1250
+#: src/slic3r/GUI/GLCanvas3D.cpp:5270 src/slic3r/GUI/GUI_Factories.cpp:1250
 #: src/slic3r/GUI/GUI_Factories.cpp:1274 src/slic3r/GUI/GUI_Factories.cpp:1285
 msgid "Add instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5276 src/slic3r/GUI/GUI_Factories.cpp:1253
+#: src/slic3r/GUI/GLCanvas3D.cpp:5281 src/slic3r/GUI/GUI_Factories.cpp:1253
 msgid "Remove instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5289
+#: src/slic3r/GUI/GLCanvas3D.cpp:5294
 msgid "Split to objects"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5299
+#: src/slic3r/GUI/GLCanvas3D.cpp:5304
 msgid "Split to parts"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5405 src/slic3r/GUI/GLCanvas3D.cpp:5442
+#: src/slic3r/GUI/GLCanvas3D.cpp:5410 src/slic3r/GUI/GLCanvas3D.cpp:5447
 msgid "Click right mouse button to open/close History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5427
+#: src/slic3r/GUI/GLCanvas3D.cpp:5432
 #, possible-boost-format
 msgid "Next Undo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5442 src/slic3r/GUI/KBShortcutsDialog.cpp:111
-#: src/slic3r/GUI/MainFrame.cpp:1450
+#: src/slic3r/GUI/GLCanvas3D.cpp:5447 src/slic3r/GUI/KBShortcutsDialog.cpp:111
+#: src/slic3r/GUI/MainFrame.cpp:1480
 msgid "Redo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5463
+#: src/slic3r/GUI/GLCanvas3D.cpp:5468
 #, possible-boost-format
 msgid "Next Redo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7380
+#: src/slic3r/GUI/GLCanvas3D.cpp:7385
 msgid "An object outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7381
+#: src/slic3r/GUI/GLCanvas3D.cpp:7386
 msgid "A toolpath outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7382
+#: src/slic3r/GUI/GLCanvas3D.cpp:7387
 msgid "SLA supports outside the print area were detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7383
+#: src/slic3r/GUI/GLCanvas3D.cpp:7388
 msgid "Some objects are not visible during editing."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7385
+#: src/slic3r/GUI/GLCanvas3D.cpp:7390
 msgid ""
 "An object outside the print area was detected.\n"
 "Resolve the current problem to continue slicing."
 msgstr ""
 
 #. TRN %3% is name of Object1, %4% is name of Object2
-#: src/slic3r/GUI/GLCanvas3D.cpp:7397
+#: src/slic3r/GUI/GLCanvas3D.cpp:7402
 #, possible-boost-format
 msgid ""
 "Conflicts in G-code paths have been detected at layer %1%, z=%2$.2f mm. "
 "Please reposition the conflicting objects (%3% <-> %4%) further apart."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7427
+#: src/slic3r/GUI/GLCanvas3D.cpp:7432
 msgid "Jump to"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7430
+#: src/slic3r/GUI/GLCanvas3D.cpp:7435
 #: src/slic3r/GUI/NotificationManager.cpp:2105
 #: src/slic3r/GUI/NotificationManager.cpp:2112
 #: src/slic3r/GUI/NotificationManager.cpp:2128
@@ -9675,11 +10263,11 @@ msgstr ""
 msgid "ERROR:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7507
+#: src/slic3r/GUI/GLCanvas3D.cpp:7512
 msgid "Selection-Add from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7522
+#: src/slic3r/GUI/GLCanvas3D.cpp:7527
 msgid "Selection-Remove from rectangle"
 msgstr ""
 
@@ -9706,7 +10294,7 @@ msgstr ""
 msgid "Review the substitutions and adjust them if needed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:875
+#: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:878
 msgid "SLA print settings"
 msgstr ""
 
@@ -9871,8 +10459,8 @@ msgid ""
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1197 src/slic3r/GUI/GUI_App.cpp:3308
-#: src/slic3r/GUI/Plater.cpp:1751 src/slic3r/GUI/UnsavedChangesDialog.cpp:926
+#: src/slic3r/GUI/GUI_App.cpp:1197 src/slic3r/GUI/GUI_App.cpp:3309
+#: src/slic3r/GUI/Plater.cpp:1754 src/slic3r/GUI/UnsavedChangesDialog.cpp:926
 msgid "Remember my choice"
 msgstr ""
 
@@ -9924,260 +10512,260 @@ msgstr ""
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1811
+#: src/slic3r/GUI/GUI_App.cpp:1812
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1815
+#: src/slic3r/GUI/GUI_App.cpp:1816
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1817
+#: src/slic3r/GUI/GUI_App.cpp:1818
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1821 src/slic3r/GUI/PhysicalPrinterDialog.cpp:815
+#: src/slic3r/GUI/GUI_App.cpp:1822 src/slic3r/GUI/PhysicalPrinterDialog.cpp:815
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1834 src/slic3r/GUI/GUI_App.cpp:1845
+#: src/slic3r/GUI/GUI_App.cpp:1835 src/slic3r/GUI/GUI_App.cpp:1846
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1848
+#: src/slic3r/GUI/GUI_App.cpp:1849
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1853
+#: src/slic3r/GUI/GUI_App.cpp:1854
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1992
+#: src/slic3r/GUI/GUI_App.cpp:1993
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2004
+#: src/slic3r/GUI/GUI_App.cpp:2005
 msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2015
+#: src/slic3r/GUI/GUI_App.cpp:2016
 msgid "Choose ZIP file"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2027
-msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
+#: src/slic3r/GUI/GUI_App.cpp:2028
+msgid "Choose one file (GCODE/GCO/G/BGCODE/BGC/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2038
+#: src/slic3r/GUI/GUI_App.cpp:2039
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2179
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2179
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2336
+#: src/slic3r/GUI/GUI_App.cpp:2337
 msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2375
+#: src/slic3r/GUI/GUI_App.cpp:2376
 msgid ""
 "Simple mode supports manipulation with single-part object(s)\n"
 "or object(s) with support modifiers only."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2377
+#: src/slic3r/GUI/GUI_App.cpp:2378
 msgid "Please check your object list before mode changing."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2378
+#: src/slic3r/GUI/GUI_App.cpp:2379
 msgid "Change application mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2409
+#: src/slic3r/GUI/GUI_App.cpp:2410
 #, possible-c-format, possible-boost-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2413
+#: src/slic3r/GUI/GUI_App.cpp:2414
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2413
+#: src/slic3r/GUI/GUI_App.cpp:2414
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2414
+#: src/slic3r/GUI/GUI_App.cpp:2415
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2414
+#: src/slic3r/GUI/GUI_App.cpp:2415
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2415
+#: src/slic3r/GUI/GUI_App.cpp:2416
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2415
+#: src/slic3r/GUI/GUI_App.cpp:2416
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2416
+#: src/slic3r/GUI/GUI_App.cpp:2417
 msgid "Check for Application Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2416
+#: src/slic3r/GUI/GUI_App.cpp:2417
 msgid "Check for new version of application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2423
+#: src/slic3r/GUI/GUI_App.cpp:2424
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2429
+#: src/slic3r/GUI/GUI_App.cpp:2430
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2434
+#: src/slic3r/GUI/GUI_App.cpp:2435
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2436
+#: src/slic3r/GUI/GUI_App.cpp:2437
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2437
+#: src/slic3r/GUI/GUI_App.cpp:2438
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2442
+#: src/slic3r/GUI/GUI_App.cpp:2443
 #, possible-c-format, possible-boost-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2445
+#: src/slic3r/GUI/GUI_App.cpp:2446
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2448
+#: src/slic3r/GUI/GUI_App.cpp:2449
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2448
+#: src/slic3r/GUI/GUI_App.cpp:2449
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2471
+#: src/slic3r/GUI/GUI_App.cpp:2472
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2472
+#: src/slic3r/GUI/GUI_App.cpp:2473
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2473
+#: src/slic3r/GUI/GUI_App.cpp:2474
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2489
+#: src/slic3r/GUI/GUI_App.cpp:2490
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2498
+#: src/slic3r/GUI/GUI_App.cpp:2499
 #, possible-boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2512
+#: src/slic3r/GUI/GUI_App.cpp:2513
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2532
+#: src/slic3r/GUI/GUI_App.cpp:2533
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2535
+#: src/slic3r/GUI/GUI_App.cpp:2536
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2537 src/slic3r/GUI/Preferences.cpp:714
+#: src/slic3r/GUI/GUI_App.cpp:2538 src/slic3r/GUI/Preferences.cpp:714
 #: src/slic3r/GUI/Selection.cpp:1430
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2564
+#: src/slic3r/GUI/GUI_App.cpp:2565
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2572
+#: src/slic3r/GUI/GUI_App.cpp:2573
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2738
+#: src/slic3r/GUI/GUI_App.cpp:2739
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2776
+#: src/slic3r/GUI/GUI_App.cpp:2777
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2779
+#: src/slic3r/GUI/GUI_App.cpp:2780
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2779
+#: src/slic3r/GUI/GUI_App.cpp:2780
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2798
+#: src/slic3r/GUI/GUI_App.cpp:2799
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2798
+#: src/slic3r/GUI/GUI_App.cpp:2799
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2802
+#: src/slic3r/GUI/GUI_App.cpp:2803
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3041
+#: src/slic3r/GUI/GUI_App.cpp:3042
 msgid ""
 "It's impossible to print object(s) which contains parameter modifiers with "
 "SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3042 src/slic3r/GUI/Jobs/SLAImportJob.cpp:153
-#: src/slic3r/GUI/Plater.cpp:2550
+#: src/slic3r/GUI/GUI_App.cpp:3043 src/slic3r/GUI/Jobs/SLAImportJob.cpp:153
+#: src/slic3r/GUI/Plater.cpp:2554
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076
+#: src/slic3r/GUI/GUI_App.cpp:3077
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/GUI_App.cpp:3095
 #, possible-boost-format
 msgid "Welcome to %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3096
+#: src/slic3r/GUI/GUI_App.cpp:3097
 #, possible-boost-format
 msgid ""
 "Do you wish to register downloads from <b>Printables.com</b>\n"
@@ -10186,67 +10774,67 @@ msgid ""
 "Downloads can be registered for only 1 executable at time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3124
+#: src/slic3r/GUI/GUI_App.cpp:3125
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3307 src/slic3r/GUI/GUI_App.cpp:3330
+#: src/slic3r/GUI/GUI_App.cpp:3308 src/slic3r/GUI/GUI_App.cpp:3331
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3307 src/slic3r/GUI/GUI_App.cpp:3330
+#: src/slic3r/GUI/GUI_App.cpp:3308 src/slic3r/GUI/GUI_App.cpp:3331
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3312 src/slic3r/GUI/Preferences.cpp:578
+#: src/slic3r/GUI/GUI_App.cpp:3313 src/slic3r/GUI/Preferences.cpp:578
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3314 src/slic3r/GUI/Plater.cpp:1757
+#: src/slic3r/GUI/GUI_App.cpp:3315 src/slic3r/GUI/Plater.cpp:1760
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3315
+#: src/slic3r/GUI/GUI_App.cpp:3316
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3316 src/slic3r/GUI/Plater.cpp:1761
+#: src/slic3r/GUI/GUI_App.cpp:3317 src/slic3r/GUI/Plater.cpp:1764
 #, possible-boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3318 src/slic3r/GUI/Plater.cpp:1763
+#: src/slic3r/GUI/GUI_App.cpp:3319 src/slic3r/GUI/Plater.cpp:1766
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3392
+#: src/slic3r/GUI/GUI_App.cpp:3393
 msgid "Check for application update has failed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3393
+#: src/slic3r/GUI/GUI_App.cpp:3394
 #, possible-boost-format
 msgid "You are currently running the latest released version %1%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3396
+#: src/slic3r/GUI/GUI_App.cpp:3397
 #, possible-boost-format
 msgid ""
 "There are no new released versions online. The latest release version is %1%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3457
+#: src/slic3r/GUI/GUI_App.cpp:3458
 #, possible-boost-format
 msgid "Downloading %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3467
+#: src/slic3r/GUI/GUI_App.cpp:3468
 msgid "Downloading of the new version is in progress. Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3485
+#: src/slic3r/GUI/GUI_App.cpp:3486
 msgid ""
 "Could not start URL download. Destination folder is not set. Please choose "
 "destination folder in Configuration Wizard."
@@ -10374,7 +10962,7 @@ msgstr ""
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:829 src/slic3r/GUI/Plater.cpp:3653
+#: src/slic3r/GUI/GUI_Factories.cpp:829 src/slic3r/GUI/Plater.cpp:3664
 msgid "Replace with STL"
 msgstr ""
 
@@ -10394,19 +10982,19 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:933 src/slic3r/GUI/Plater.cpp:6360
+#: src/slic3r/GUI/GUI_Factories.cpp:933 src/slic3r/GUI/Plater.cpp:6477
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:934 src/slic3r/GUI/Plater.cpp:6361
+#: src/slic3r/GUI/GUI_Factories.cpp:934 src/slic3r/GUI/Plater.cpp:6478
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:935 src/slic3r/GUI/Plater.cpp:6362
+#: src/slic3r/GUI/GUI_Factories.cpp:935 src/slic3r/GUI/Plater.cpp:6479
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:936 src/slic3r/GUI/Plater.cpp:6362
+#: src/slic3r/GUI/GUI_Factories.cpp:936 src/slic3r/GUI/Plater.cpp:6479
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -10678,7 +11266,7 @@ msgstr ""
 msgid "Load Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1645 src/slic3r/GUI/Plater.cpp:2508
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1645 src/slic3r/GUI/Plater.cpp:2512
 msgid "Loading file"
 msgstr ""
 
@@ -10798,7 +11386,7 @@ msgstr ""
 msgid "Split to Parts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2191 src/slic3r/GUI/Plater.cpp:3165
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2191 src/slic3r/GUI/Plater.cpp:3176
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "splitting the object."
@@ -10927,7 +11515,7 @@ msgid "of a current Object"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:4155
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4230 src/slic3r/GUI/Plater.cpp:221
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4230 src/slic3r/GUI/Plater.cpp:224
 msgid "Info"
 msgstr ""
 
@@ -11025,11 +11613,6 @@ msgstr ""
 msgid "Select coordinate space, in which the transformation will be performed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:239
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:654
-msgid "Position"
-msgstr ""
-
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:256
 msgid "Size [World]"
 msgstr ""
@@ -11180,15 +11763,15 @@ msgstr ""
 msgid "Edit"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:1194 src/slic3r/GUI/Search.cpp:535
+#: src/slic3r/GUI/ImGuiWrapper.cpp:1195 src/slic3r/GUI/Search.cpp:535
 msgid "Use for search"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:1195 src/slic3r/GUI/Search.cpp:528
+#: src/slic3r/GUI/ImGuiWrapper.cpp:1196 src/slic3r/GUI/Search.cpp:528
 msgid "Category"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:1197 src/slic3r/GUI/Search.cpp:530
+#: src/slic3r/GUI/ImGuiWrapper.cpp:1198 src/slic3r/GUI/Search.cpp:530
 msgid "Search in English"
 msgstr ""
 
@@ -11209,7 +11792,7 @@ msgstr ""
 msgid "Could not arrange model objects! Some geometries may be invalid."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:363 src/slic3r/GUI/Plater.cpp:7349
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:363 src/slic3r/GUI/Plater.cpp:7466
 #, possible-c-format, possible-boost-format
 msgid ""
 "Arrangement ignored the following objects which can't fit into a single "
@@ -11349,11 +11932,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:152 src/slic3r/GUI/Plater.cpp:2549
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:152 src/slic3r/GUI/Plater.cpp:2553
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:154 src/slic3r/GUI/Plater.cpp:2551
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:154 src/slic3r/GUI/Plater.cpp:2555
 msgid "Attention!"
 msgstr ""
 
@@ -11368,7 +11951,7 @@ msgid ""
 "or missing."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:22 src/slic3r/GUI/MainFrame.cpp:1205
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:22 src/slic3r/GUI/MainFrame.cpp:1226
 msgid "Keyboard Shortcuts"
 msgstr ""
 
@@ -11404,7 +11987,7 @@ msgstr ""
 msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:101 src/slic3r/GUI/Plater.cpp:7400
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:101 src/slic3r/GUI/Plater.cpp:7517
 msgid "Send G-code"
 msgstr ""
 
@@ -11412,7 +11995,7 @@ msgstr ""
 msgid "Export config"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:103 src/slic3r/GUI/Plater.cpp:956
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103 src/slic3r/GUI/Plater.cpp:959
 msgid "Export to SD card / Flash drive"
 msgstr ""
 
@@ -11745,13 +12328,13 @@ msgstr ""
 msgid "Objects List"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/MainFrame.cpp:1633
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/MainFrame.cpp:1656
 msgid "Open a G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:217 src/slic3r/GUI/MainFrame.cpp:1464
-#: src/slic3r/GUI/MainFrame.cpp:1468 src/slic3r/GUI/MainFrame.cpp:1638
-#: src/slic3r/GUI/MainFrame.cpp:1642
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:217 src/slic3r/GUI/MainFrame.cpp:1494
+#: src/slic3r/GUI/MainFrame.cpp:1498 src/slic3r/GUI/MainFrame.cpp:1661
+#: src/slic3r/GUI/MainFrame.cpp:1665
 msgid "Reload the plater from disk"
 msgstr ""
 
@@ -11787,8 +12370,8 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:240 src/slic3r/GUI/Plater.cpp:4642
-#: src/slic3r/GUI/Tab.cpp:3025
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:240 src/slic3r/GUI/Plater.cpp:4653
+#: src/slic3r/GUI/Tab.cpp:3137
 msgid "Preview"
 msgstr ""
 
@@ -11866,7 +12449,7 @@ msgid "Keyboard shortcuts"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:88 src/slic3r/GUI/MainFrame.cpp:102
-#: src/slic3r/GUI/MainFrame.cpp:1524
+#: src/slic3r/GUI/MainFrame.cpp:1554
 msgid "Open a new PrusaSlicer instance"
 msgstr ""
 
@@ -11874,11 +12457,11 @@ msgstr ""
 msgid "G-code preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1409
+#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1439
 msgid "Open G-code viewer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:102 src/slic3r/GUI/MainFrame.cpp:1649
+#: src/slic3r/GUI/MainFrame.cpp:102 src/slic3r/GUI/MainFrame.cpp:1679
 msgid "Open PrusaSlicer"
 msgstr ""
 
@@ -11899,29 +12482,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:341 src/slic3r/GUI/MainFrame.cpp:391
-#: src/slic3r/GUI/Tab.hpp:433 src/slic3r/GUI/Tab.hpp:575
+#: src/slic3r/GUI/Tab.hpp:442 src/slic3r/GUI/Tab.hpp:587
 msgid "Print Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:342 src/slic3r/GUI/MainFrame.cpp:395
-#: src/slic3r/GUI/MainFrame.cpp:2218 src/slic3r/GUI/MainFrame.cpp:2219
-#: src/slic3r/GUI/Tab.hpp:556
+#: src/slic3r/GUI/MainFrame.cpp:2241 src/slic3r/GUI/MainFrame.cpp:2242
+#: src/slic3r/GUI/Tab.hpp:568
 msgid "Material Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:342 src/slic3r/GUI/MainFrame.cpp:393
-#: src/slic3r/GUI/MainFrame.cpp:2218 src/slic3r/GUI/MainFrame.cpp:2219
-#: src/slic3r/GUI/Tab.hpp:470
+#: src/slic3r/GUI/MainFrame.cpp:2241 src/slic3r/GUI/MainFrame.cpp:2242
+#: src/slic3r/GUI/Tab.hpp:479
 msgid "Filament Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:343 src/slic3r/GUI/MainFrame.cpp:397
-#: src/slic3r/GUI/Tab.hpp:524
+#: src/slic3r/GUI/Tab.hpp:536
 msgid "Printer Settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:696 src/slic3r/GUI/Plater.cpp:1743
-#: src/slic3r/GUI/Plater.cpp:2898
+#: src/slic3r/GUI/MainFrame.cpp:696 src/slic3r/GUI/Plater.cpp:1746
+#: src/slic3r/GUI/Plater.cpp:2909
 msgid "Untitled"
 msgstr ""
 
@@ -11929,713 +12512,749 @@ msgstr ""
 msgid "based on Slic3r"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1162
+#: src/slic3r/GUI/MainFrame.cpp:1161 src/slic3r/GUI/MainFrame.cpp:1164
+#, possible-c-format, possible-boost-format
+msgid "&About %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1161 src/slic3r/GUI/MainFrame.cpp:1164
+msgid "Show about dialog"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1186
 #, possible-c-format, possible-boost-format
 msgid "%s &Website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1163 src/slic3r/GUI/MainFrame.cpp:1167
-#: src/slic3r/GUI/MainFrame.cpp:1171
+#: src/slic3r/GUI/MainFrame.cpp:1187 src/slic3r/GUI/MainFrame.cpp:1191
+#: src/slic3r/GUI/MainFrame.cpp:1195
 #, possible-c-format, possible-boost-format
 msgid "Open the %s website in your browser"
 msgstr ""
 
 #. TRN Item from "Help" menu
-#: src/slic3r/GUI/MainFrame.cpp:1166
+#: src/slic3r/GUI/MainFrame.cpp:1190
 msgid "&Quick Start"
 msgstr ""
 
 #. TRN Item from "Help" menu
-#: src/slic3r/GUI/MainFrame.cpp:1170
+#: src/slic3r/GUI/MainFrame.cpp:1194
 msgid "Sample &G-codes and Models"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1174
+#: src/slic3r/GUI/MainFrame.cpp:1198
 msgid "Prusa 3D &Drivers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1174
+#: src/slic3r/GUI/MainFrame.cpp:1198
 msgid "Open the Prusa3D drivers download page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1176
+#: src/slic3r/GUI/MainFrame.cpp:1200
 msgid "Software &Releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1176
+#: src/slic3r/GUI/MainFrame.cpp:1200
 msgid "Open the software releases page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1186
+#: src/slic3r/GUI/MainFrame.cpp:1210
 msgid "System &Info"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1186
+#: src/slic3r/GUI/MainFrame.cpp:1210
 msgid "Show system information"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1188
+#: src/slic3r/GUI/MainFrame.cpp:1212
 msgid "Show &Configuration Folder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1188
+#: src/slic3r/GUI/MainFrame.cpp:1212
 msgid "Show user configuration folder (datadir)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1190
+#: src/slic3r/GUI/MainFrame.cpp:1214
 msgid "Report an I&ssue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1190
+#: src/slic3r/GUI/MainFrame.cpp:1214
 #, possible-c-format, possible-boost-format
 msgid "Report an issue on %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1193 src/slic3r/GUI/MainFrame.cpp:1196
-#, possible-c-format, possible-boost-format
-msgid "&About %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:1193 src/slic3r/GUI/MainFrame.cpp:1196
-msgid "Show about dialog"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:1198
+#: src/slic3r/GUI/MainFrame.cpp:1219
 msgid "Show Tip of the Day"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1202
+#: src/slic3r/GUI/MainFrame.cpp:1223
 msgid ""
 "Opens Tip of the day notification in bottom right corner or shows another "
 "tip if already opened."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1205
+#: src/slic3r/GUI/MainFrame.cpp:1226
 msgid "Show the list of the keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1219
+#: src/slic3r/GUI/MainFrame.cpp:1240
 msgid "Iso"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1219
+#: src/slic3r/GUI/MainFrame.cpp:1240
 msgid "Iso View"
 msgstr ""
 
 #. TRN Main menu: View->Top
-#: src/slic3r/GUI/MainFrame.cpp:1223
+#: src/slic3r/GUI/MainFrame.cpp:1244
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1223
+#: src/slic3r/GUI/MainFrame.cpp:1244
 msgid "Top View"
 msgstr ""
 
 #. TRN Main menu: View->Bottom
-#: src/slic3r/GUI/MainFrame.cpp:1226
+#: src/slic3r/GUI/MainFrame.cpp:1247
 msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1226
+#: src/slic3r/GUI/MainFrame.cpp:1247
 msgid "Bottom View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1228
+#: src/slic3r/GUI/MainFrame.cpp:1249
 msgid "Front"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1228
+#: src/slic3r/GUI/MainFrame.cpp:1249
 msgid "Front View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1230
+#: src/slic3r/GUI/MainFrame.cpp:1251
 msgid "Rear View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1232
+#: src/slic3r/GUI/MainFrame.cpp:1253
 msgid "Left"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1232
+#: src/slic3r/GUI/MainFrame.cpp:1253
 msgid "Left View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1234
+#: src/slic3r/GUI/MainFrame.cpp:1255
 msgid "Right"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1234
+#: src/slic3r/GUI/MainFrame.cpp:1255
 msgid "Right View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1247
+#: src/slic3r/GUI/MainFrame.cpp:1268
 msgid "&New Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1247
+#: src/slic3r/GUI/MainFrame.cpp:1268
 msgid "Start a new project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1250
+#: src/slic3r/GUI/MainFrame.cpp:1271
 msgid "&Open Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1250
+#: src/slic3r/GUI/MainFrame.cpp:1271
 msgid "Open a project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1255
+#: src/slic3r/GUI/MainFrame.cpp:1276
 msgid "Recent projects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1267
+#: src/slic3r/GUI/MainFrame.cpp:1288
 msgid ""
 "The selected project is no longer available.\n"
 "Do you want to remove it from the recent projects list?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1291
+#: src/slic3r/GUI/MainFrame.cpp:1312
 msgid "&Save Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1291
+#: src/slic3r/GUI/MainFrame.cpp:1312
 msgid "Save current project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1295 src/slic3r/GUI/MainFrame.cpp:1297
+#: src/slic3r/GUI/MainFrame.cpp:1316 src/slic3r/GUI/MainFrame.cpp:1318
 msgid "Save Project &as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1295 src/slic3r/GUI/MainFrame.cpp:1297
+#: src/slic3r/GUI/MainFrame.cpp:1316 src/slic3r/GUI/MainFrame.cpp:1318
 msgid "Save current project file as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1305
+#: src/slic3r/GUI/MainFrame.cpp:1326
 msgid "Import STL/3MF/STEP/OBJ/AM&F"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1305
+#: src/slic3r/GUI/MainFrame.cpp:1326
 msgid "Load a model"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1309
+#: src/slic3r/GUI/MainFrame.cpp:1330
 msgid "Import STL (Imperial Units)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1309
+#: src/slic3r/GUI/MainFrame.cpp:1330
 msgid "Load an model saved with imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1313
+#: src/slic3r/GUI/MainFrame.cpp:1334
 msgid "Import SLA Archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1313
+#: src/slic3r/GUI/MainFrame.cpp:1334
 msgid "Load an SLA archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1317
+#: src/slic3r/GUI/MainFrame.cpp:1338
 msgid "Import ZIP Archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1317
+#: src/slic3r/GUI/MainFrame.cpp:1338
 msgid "Load a ZIP archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1322
+#: src/slic3r/GUI/MainFrame.cpp:1343
 msgid "Import &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1322
+#: src/slic3r/GUI/MainFrame.cpp:1343
 msgid "Load exported configuration file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1325
+#: src/slic3r/GUI/MainFrame.cpp:1346
 msgid "Import Config from &Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1325
+#: src/slic3r/GUI/MainFrame.cpp:1346
 msgid "Load configuration from project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1329
+#: src/slic3r/GUI/MainFrame.cpp:1350
 msgid "Import Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1329
+#: src/slic3r/GUI/MainFrame.cpp:1350
 msgid "Load presets from a bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1332
+#: src/slic3r/GUI/MainFrame.cpp:1353
 msgid "&Import"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1335 src/slic3r/GUI/MainFrame.cpp:1698
+#: src/slic3r/GUI/MainFrame.cpp:1356 src/slic3r/GUI/MainFrame.cpp:1721
 msgid "Export &G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1335
+#: src/slic3r/GUI/MainFrame.cpp:1356
 msgid "Export current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1339 src/slic3r/GUI/MainFrame.cpp:1699
+#: src/slic3r/GUI/MainFrame.cpp:1360 src/slic3r/GUI/MainFrame.cpp:1722
 msgid "S&end G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1339
+#: src/slic3r/GUI/MainFrame.cpp:1360
 msgid "Send to print current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1343
+#: src/slic3r/GUI/MainFrame.cpp:1364
 msgid "Export G-code to SD Card / Flash Drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1343
+#: src/slic3r/GUI/MainFrame.cpp:1364
 msgid "Export current plate as G-code to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1347
+#: src/slic3r/GUI/MainFrame.cpp:1368
 msgid "Export Plate as &STL/OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1347
+#: src/slic3r/GUI/MainFrame.cpp:1368
 msgid "Export current plate as STL/OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1350
+#: src/slic3r/GUI/MainFrame.cpp:1371
 msgid "Export Plate as STL/OBJ &Including Supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1350
+#: src/slic3r/GUI/MainFrame.cpp:1371
 msgid "Export current plate as STL/OBJ including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1358 src/slic3r/GUI/MainFrame.cpp:1646
+#: src/slic3r/GUI/MainFrame.cpp:1379 src/slic3r/GUI/MainFrame.cpp:1676
 msgid "Export &Toolpaths as OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1358 src/slic3r/GUI/MainFrame.cpp:1646
+#: src/slic3r/GUI/MainFrame.cpp:1379 src/slic3r/GUI/MainFrame.cpp:1676
 msgid "Export toolpaths as OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1362
+#: src/slic3r/GUI/MainFrame.cpp:1383
 msgid "Export &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1362
+#: src/slic3r/GUI/MainFrame.cpp:1383
 msgid "Export current configuration to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1365
+#: src/slic3r/GUI/MainFrame.cpp:1386
 msgid "Export Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1365
+#: src/slic3r/GUI/MainFrame.cpp:1386
 msgid "Export all presets to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1368
+#: src/slic3r/GUI/MainFrame.cpp:1389
 msgid "Export Config Bundle With Physical Printers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1368
+#: src/slic3r/GUI/MainFrame.cpp:1389
 msgid "Export all presets including physical printers to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1371
+#: src/slic3r/GUI/MainFrame.cpp:1392
 msgid "&Export"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1373
+#: src/slic3r/GUI/MainFrame.cpp:1395
+msgid "Convert ascii G-code to &binary"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1395
+msgid "Convert a G-code file from ascii to binary format"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1398
+msgid "Convert binary G-code to &ascii"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1398
+msgid "Convert a G-code file from binary to ascii format"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1401
+msgid "&Convert"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1403
 msgid "Ejec&t SD Card / Flash Drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1373
+#: src/slic3r/GUI/MainFrame.cpp:1403
 msgid "Eject SD card / Flash drive after the G-code was exported to it."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1381
+#: src/slic3r/GUI/MainFrame.cpp:1411
 msgid "Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1381
+#: src/slic3r/GUI/MainFrame.cpp:1411
 msgid "Slice a file into a G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1387
+#: src/slic3r/GUI/MainFrame.cpp:1417
 msgid "Quick Slice and Save As"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1387
+#: src/slic3r/GUI/MainFrame.cpp:1417
 msgid "Slice a file into a G-code, save as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1393
+#: src/slic3r/GUI/MainFrame.cpp:1423
 msgid "Repeat Last Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1393
+#: src/slic3r/GUI/MainFrame.cpp:1423
 msgid "Repeat last quick slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1401
+#: src/slic3r/GUI/MainFrame.cpp:1431
 msgid "(Re)Slice No&w"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1401
+#: src/slic3r/GUI/MainFrame.cpp:1431
 msgid "Start new slicing process"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1405
+#: src/slic3r/GUI/MainFrame.cpp:1435
 msgid "&Repair STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1405
+#: src/slic3r/GUI/MainFrame.cpp:1435
 msgid "Automatically repair an STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1409
+#: src/slic3r/GUI/MainFrame.cpp:1439
 msgid "&G-code Preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1413
+#: src/slic3r/GUI/MainFrame.cpp:1443
 msgid "E&xit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1413 src/slic3r/GUI/UpdateDialogs.cpp:381
+#: src/slic3r/GUI/MainFrame.cpp:1443 src/slic3r/GUI/UpdateDialogs.cpp:381
 #: src/slic3r/GUI/UpdateDialogs.cpp:428
 #, possible-c-format, possible-boost-format
 msgid "Exit %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1415 src/slic3r/GUI/MainFrame.cpp:1653
+#: src/slic3r/GUI/MainFrame.cpp:1445 src/slic3r/GUI/MainFrame.cpp:1683
 msgid "&Quit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1415 src/slic3r/GUI/MainFrame.cpp:1653
+#: src/slic3r/GUI/MainFrame.cpp:1445 src/slic3r/GUI/MainFrame.cpp:1683
 #, possible-c-format, possible-boost-format
 msgid "Quit %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1431
+#: src/slic3r/GUI/MainFrame.cpp:1461
 msgid "&Select All"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1432
+#: src/slic3r/GUI/MainFrame.cpp:1462
 msgid "Selects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1434
+#: src/slic3r/GUI/MainFrame.cpp:1464
 msgid "D&eselect All"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1435
+#: src/slic3r/GUI/MainFrame.cpp:1465
 msgid "Deselects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1438
+#: src/slic3r/GUI/MainFrame.cpp:1468
 msgid "&Delete Selected"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1439
+#: src/slic3r/GUI/MainFrame.cpp:1469
 msgid "Deletes the current selection"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1441
+#: src/slic3r/GUI/MainFrame.cpp:1471
 msgid "Delete &All"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1442
+#: src/slic3r/GUI/MainFrame.cpp:1472
 msgid "Deletes all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1446
+#: src/slic3r/GUI/MainFrame.cpp:1476
 msgid "&Undo"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1449
+#: src/slic3r/GUI/MainFrame.cpp:1479
 msgid "&Redo"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1454
+#: src/slic3r/GUI/MainFrame.cpp:1484
 msgid "&Copy"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1455
+#: src/slic3r/GUI/MainFrame.cpp:1485
 msgid "Copy selection to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1457
+#: src/slic3r/GUI/MainFrame.cpp:1487
 msgid "&Paste"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1458
+#: src/slic3r/GUI/MainFrame.cpp:1488
 msgid "Paste clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1463 src/slic3r/GUI/MainFrame.cpp:1467
-#: src/slic3r/GUI/MainFrame.cpp:1637 src/slic3r/GUI/MainFrame.cpp:1641
+#: src/slic3r/GUI/MainFrame.cpp:1493 src/slic3r/GUI/MainFrame.cpp:1497
+#: src/slic3r/GUI/MainFrame.cpp:1660 src/slic3r/GUI/MainFrame.cpp:1664
 msgid "Re&load from Disk"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1473
+#: src/slic3r/GUI/MainFrame.cpp:1503
 msgid "Searc&h"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1474
+#: src/slic3r/GUI/MainFrame.cpp:1504
 msgid "Search in settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1482
+#: src/slic3r/GUI/MainFrame.cpp:1512
 msgid "&Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1482
+#: src/slic3r/GUI/MainFrame.cpp:1512
 msgid "Show the plater"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1487
+#: src/slic3r/GUI/MainFrame.cpp:1517
 msgid "P&rint Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1487
+#: src/slic3r/GUI/MainFrame.cpp:1517
 msgid "Show the print settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1490 src/slic3r/GUI/MainFrame.cpp:1701
+#: src/slic3r/GUI/MainFrame.cpp:1520 src/slic3r/GUI/MainFrame.cpp:1724
 msgid "&Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1490
+#: src/slic3r/GUI/MainFrame.cpp:1520
 msgid "Show the filament settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1494
+#: src/slic3r/GUI/MainFrame.cpp:1524
 msgid "Print&er Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1494
+#: src/slic3r/GUI/MainFrame.cpp:1524
 msgid "Show the printer settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1500
+#: src/slic3r/GUI/MainFrame.cpp:1530
 msgid "3&D"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1500
+#: src/slic3r/GUI/MainFrame.cpp:1530
 msgid "Show the 3D editing view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1503
+#: src/slic3r/GUI/MainFrame.cpp:1533
 msgid "Pre&view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1503
+#: src/slic3r/GUI/MainFrame.cpp:1533
 msgid "Show the 3D slices preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1509
+#: src/slic3r/GUI/MainFrame.cpp:1539
 msgid "Open the dialog to modify shape gallery"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1520
+#: src/slic3r/GUI/MainFrame.cpp:1550
 msgid "Print &Host Upload Queue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1520
+#: src/slic3r/GUI/MainFrame.cpp:1550
 msgid "Display the Print Host Upload Queue window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1524
+#: src/slic3r/GUI/MainFrame.cpp:1554
 msgid "Open New Instance"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1528
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1739
+#: src/slic3r/GUI/MainFrame.cpp:1558
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1737
 msgid "Compare Presets"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1528
+#: src/slic3r/GUI/MainFrame.cpp:1558
 msgid "Compare presets"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1538
+#: src/slic3r/GUI/MainFrame.cpp:1568
 msgid "Show &Labels"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1538
+#: src/slic3r/GUI/MainFrame.cpp:1568
 msgid "Show object/instance labels in 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1541 src/slic3r/GUI/MainFrame.cpp:1663
+#: src/slic3r/GUI/MainFrame.cpp:1571 src/slic3r/GUI/MainFrame.cpp:1693
 msgid "Show Legen&d"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1541
+#: src/slic3r/GUI/MainFrame.cpp:1571
 msgid "Show legend in preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1544
+#: src/slic3r/GUI/MainFrame.cpp:1574
 msgid "&Collapse Sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1544 src/slic3r/GUI/Plater.cpp:2359
+#: src/slic3r/GUI/MainFrame.cpp:1574 src/slic3r/GUI/Plater.cpp:2362
 msgid "Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1549
+#: src/slic3r/GUI/MainFrame.cpp:1579
 msgid "&Fullscreen"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1549
+#: src/slic3r/GUI/MainFrame.cpp:1579
 msgid "Fullscreen"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1565 src/slic3r/GUI/MainFrame.cpp:1672
+#: src/slic3r/GUI/MainFrame.cpp:1595 src/slic3r/GUI/MainFrame.cpp:1702
 msgid "&File"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1566
+#: src/slic3r/GUI/MainFrame.cpp:1596
 msgid "&Edit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1567
+#: src/slic3r/GUI/MainFrame.cpp:1597
 msgid "&Window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1568 src/slic3r/GUI/MainFrame.cpp:1673
+#: src/slic3r/GUI/MainFrame.cpp:1598 src/slic3r/GUI/MainFrame.cpp:1703
 msgid "&View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1571 src/slic3r/GUI/MainFrame.cpp:1676
+#: src/slic3r/GUI/MainFrame.cpp:1601 src/slic3r/GUI/MainFrame.cpp:1706
 msgid "&Help"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1633
+#: src/slic3r/GUI/MainFrame.cpp:1656
 msgid "&Open G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1649
+#: src/slic3r/GUI/MainFrame.cpp:1669
+msgid "Convert ASCII G-code to &binary"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1669
+msgid "Convert a G-code file from ASCII to binary format"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1672
+msgid "Convert binary G-code to &ASCII"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1672
+msgid "Convert a G-code file from binary to ASCII format"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1679
 msgid "Open &PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1663
+#: src/slic3r/GUI/MainFrame.cpp:1693
 msgid "Show legend"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1698
+#: src/slic3r/GUI/MainFrame.cpp:1721
 msgid "E&xport"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1699
+#: src/slic3r/GUI/MainFrame.cpp:1722
 msgid "S&end to print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1701
+#: src/slic3r/GUI/MainFrame.cpp:1724
 msgid "Mate&rial Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1725
+#: src/slic3r/GUI/MainFrame.cpp:1748
 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1737
+#: src/slic3r/GUI/MainFrame.cpp:1760
 msgid "No previously sliced file."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1744
+#: src/slic3r/GUI/MainFrame.cpp:1767
 msgid "Previously sliced file ("
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1744
+#: src/slic3r/GUI/MainFrame.cpp:1767
 msgid ") not found."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1745
+#: src/slic3r/GUI/MainFrame.cpp:1768
 msgid "File Not Found"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1780
+#: src/slic3r/GUI/MainFrame.cpp:1803
 #, possible-c-format, possible-boost-format
 msgid "Save %s file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1780
+#: src/slic3r/GUI/MainFrame.cpp:1803
 msgid "SVG"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1780
+#: src/slic3r/GUI/MainFrame.cpp:1803
 msgid "G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1792
+#: src/slic3r/GUI/MainFrame.cpp:1815
 msgid "Save ZIP file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1801 src/slic3r/GUI/Plater.cpp:3409
-#: src/slic3r/GUI/Plater.cpp:6817 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:5299
+#: src/slic3r/GUI/MainFrame.cpp:1824 src/slic3r/GUI/Plater.cpp:3420
+#: src/slic3r/GUI/Plater.cpp:6934 src/slic3r/GUI/Tab.cpp:1674
+#: src/slic3r/GUI/Tab.cpp:5438
 msgid "Slicing"
 msgstr ""
 
 #. TRN ProgressDialog on reslicing: "input file basename"
-#: src/slic3r/GUI/MainFrame.cpp:1803
+#: src/slic3r/GUI/MainFrame.cpp:1826
 #, possible-c-format, possible-boost-format
 msgid "Processing %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1826
+#: src/slic3r/GUI/MainFrame.cpp:1849
 #, possible-boost-format
 msgid "%1% was successfully sliced."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1829
+#: src/slic3r/GUI/MainFrame.cpp:1852
 msgid "Slicing Done!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1845
+#: src/slic3r/GUI/MainFrame.cpp:1868
 msgid "Select the STL file to repair:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1855
+#: src/slic3r/GUI/MainFrame.cpp:1878
 msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1866
+#: src/slic3r/GUI/MainFrame.cpp:1889
 msgid "Your file was repaired."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1880
+#: src/slic3r/GUI/MainFrame.cpp:1903
 msgid "Save configuration as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1897
+#: src/slic3r/GUI/MainFrame.cpp:1920
 msgid "Loading of a configuration file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1899 src/slic3r/GUI/MainFrame.cpp:1966
+#: src/slic3r/GUI/MainFrame.cpp:1922 src/slic3r/GUI/MainFrame.cpp:1989
 msgid "Select configuration to load:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1930
+#: src/slic3r/GUI/MainFrame.cpp:1953
 msgid "Exporting configuration bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1931
+#: src/slic3r/GUI/MainFrame.cpp:1954
 msgid ""
 "Some presets are modified and the unsaved changes will not be exported into "
 "configuration bundle."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1940
+#: src/slic3r/GUI/MainFrame.cpp:1963
 msgid "Save presets bundle as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1963
+#: src/slic3r/GUI/MainFrame.cpp:1986
 msgid "Loading of a configuration bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1993
+#: src/slic3r/GUI/MainFrame.cpp:2016
 #, possible-c-format, possible-boost-format
 msgid "%d presets successfully imported."
 msgstr ""
@@ -12851,7 +13470,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:2117
 #: src/slic3r/GUI/NotificationManager.cpp:2144
 #: src/slic3r/GUI/NotificationManager.cpp:2152
-#: src/slic3r/GUI/NotificationManager.cpp:2163 src/slic3r/GUI/Plater.cpp:3256
+#: src/slic3r/GUI/NotificationManager.cpp:2163 src/slic3r/GUI/Plater.cpp:3267
 msgid "WARNING:"
 msgstr ""
 
@@ -12882,8 +13501,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:126 src/slic3r/GUI/Tab.cpp:5119
-#: src/slic3r/GUI/Tab.cpp:5256
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:126 src/slic3r/GUI/Tab.cpp:5258
+#: src/slic3r/GUI/Tab.cpp:5395
 msgid "Layers"
 msgstr ""
 
@@ -12938,7 +13557,11 @@ msgstr ""
 msgid "Error loading shaders"
 msgstr ""
 
-#: src/slic3r/GUI/OptionsGroup.cpp:138
+#: src/slic3r/GUI/OptionsGroup.cpp:116
+msgid "Edit Custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/OptionsGroup.cpp:146
 msgid "Unavailable for this method."
 msgstr ""
 
@@ -12962,7 +13585,7 @@ msgstr ""
 msgid "Add preset for this printer device"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:214 src/slic3r/GUI/Tab.cpp:2445
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:214 src/slic3r/GUI/Tab.cpp:2522
 msgid "Print Host upload"
 msgstr ""
 
@@ -13050,213 +13673,213 @@ msgstr[1] ""
 msgid "It's not possible to delete the last related preset for the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:182
+#: src/slic3r/GUI/Plater.cpp:185
 msgid "The provided name is not valid;"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:183
+#: src/slic3r/GUI/Plater.cpp:186
 msgid "the following characters are not allowed:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:247
+#: src/slic3r/GUI/Plater.cpp:250
 msgid ""
 "For a multipart object, this value isn't accurate.\n"
 "It doesn't take account of intersections and negative volumes."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:251
+#: src/slic3r/GUI/Plater.cpp:254
 msgid "Volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:253
+#: src/slic3r/GUI/Plater.cpp:256
 msgid "Facets"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:310
+#: src/slic3r/GUI/Plater.cpp:313
 msgid "Sliced Info"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:330 src/slic3r/GUI/Plater.cpp:1432
+#: src/slic3r/GUI/Plater.cpp:333 src/slic3r/GUI/Plater.cpp:1435
 msgid "Used Filament (g)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:331 src/slic3r/GUI/Plater.cpp:1413
+#: src/slic3r/GUI/Plater.cpp:334 src/slic3r/GUI/Plater.cpp:1416
 msgid "Used Filament (m)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:332 src/slic3r/GUI/Plater.cpp:1425
+#: src/slic3r/GUI/Plater.cpp:335 src/slic3r/GUI/Plater.cpp:1428
 msgid "Used Filament (mm³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:333
+#: src/slic3r/GUI/Plater.cpp:336
 msgid "Used Material (unit)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:334
+#: src/slic3r/GUI/Plater.cpp:337
 msgid "Cost (money)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:335 src/slic3r/GUI/Plater.cpp:1395
-#: src/slic3r/GUI/Plater.cpp:1397 src/slic3r/GUI/Plater.cpp:1480
-#: src/slic3r/GUI/Plater.cpp:1485
+#: src/slic3r/GUI/Plater.cpp:338 src/slic3r/GUI/Plater.cpp:1398
+#: src/slic3r/GUI/Plater.cpp:1400 src/slic3r/GUI/Plater.cpp:1483
+#: src/slic3r/GUI/Plater.cpp:1488
 msgid "Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:336
+#: src/slic3r/GUI/Plater.cpp:339
 msgid "Number of tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:461
+#: src/slic3r/GUI/Plater.cpp:464
 msgid "Select what kind of support do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:465
+#: src/slic3r/GUI/Plater.cpp:468
 msgid "For support enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:466
+#: src/slic3r/GUI/Plater.cpp:469
 msgid "Everywhere"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:499 src/slic3r/GUI/Tab.cpp:1520
+#: src/slic3r/GUI/Plater.cpp:502 src/slic3r/GUI/Tab.cpp:1528
 msgid "Brim"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:501
+#: src/slic3r/GUI/Plater.cpp:504
 msgid ""
 "This flag enables the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:509
+#: src/slic3r/GUI/Plater.cpp:512
 msgid "Purging volumes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:616
+#: src/slic3r/GUI/Plater.cpp:619
 msgid "Select what kind of pad do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:619
+#: src/slic3r/GUI/Plater.cpp:622
 msgid "Below object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:620
+#: src/slic3r/GUI/Plater.cpp:623
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:954 src/slic3r/GUI/Plater.cpp:7400
+#: src/slic3r/GUI/Plater.cpp:957 src/slic3r/GUI/Plater.cpp:7517
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:974 src/slic3r/GUI/Plater.cpp:3409
-#: src/slic3r/GUI/Plater.cpp:6820
+#: src/slic3r/GUI/Plater.cpp:977 src/slic3r/GUI/Plater.cpp:3420
+#: src/slic3r/GUI/Plater.cpp:6937
 msgid "Slice now"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1146
+#: src/slic3r/GUI/Plater.cpp:1149
 msgid "Hold Shift to Slice & Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1342
+#: src/slic3r/GUI/Plater.cpp:1345
 #, possible-boost-format
 msgid "%1% (%2$d shell)"
 msgid_plural "%1% (%2$d shells)"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:1370
+#: src/slic3r/GUI/Plater.cpp:1373
 msgid "Used Material (ml)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1373
+#: src/slic3r/GUI/Plater.cpp:1376
 msgid "object"
 msgid_plural "objects"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:1373
+#: src/slic3r/GUI/Plater.cpp:1376
 msgid "supports and pad"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1413
+#: src/slic3r/GUI/Plater.cpp:1416
 msgid "Used Filament (in)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1415 src/slic3r/GUI/Plater.cpp:1466
+#: src/slic3r/GUI/Plater.cpp:1418 src/slic3r/GUI/Plater.cpp:1469
 msgid "objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1415 src/slic3r/GUI/Plater.cpp:1466
+#: src/slic3r/GUI/Plater.cpp:1418 src/slic3r/GUI/Plater.cpp:1469
 msgid "wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1425
+#: src/slic3r/GUI/Plater.cpp:1428
 msgid "Used Filament (in³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1449
+#: src/slic3r/GUI/Plater.cpp:1452
 #, possible-boost-format
 msgid "Filament at extruder %1%"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1455
+#: src/slic3r/GUI/Plater.cpp:1458
 msgid "(including spool)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1482
+#: src/slic3r/GUI/Plater.cpp:1485
 msgid "normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1489
+#: src/slic3r/GUI/Plater.cpp:1492
 msgid "stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1749
+#: src/slic3r/GUI/Plater.cpp:1752
 #, possible-boost-format
 msgid "Do you want to save the changes to \"%1%\"?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1750 src/slic3r/GUI/UnsavedChangesDialog.cpp:913
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1610
+#: src/slic3r/GUI/Plater.cpp:1753 src/slic3r/GUI/UnsavedChangesDialog.cpp:913
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1608
 msgid "Save"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1750 src/slic3r/GUI/UnsavedChangesDialog.cpp:907
+#: src/slic3r/GUI/Plater.cpp:1753 src/slic3r/GUI/UnsavedChangesDialog.cpp:907
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1755 src/slic3r/GUI/Preferences.cpp:339
+#: src/slic3r/GUI/Plater.cpp:1758 src/slic3r/GUI/Preferences.cpp:339
 msgid "Ask for unsaved changes in project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1758
+#: src/slic3r/GUI/Plater.cpp:1761
 msgid ""
 "You will not be asked about it again, when: \n"
 "- Closing PrusaSlicer,\n"
 "- Loading or creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2226
+#: src/slic3r/GUI/Plater.cpp:2229
 #, possible-c-format, possible-boost-format
 msgid ""
 "Successfully unmounted. The device %s(%s) can now be safely removed from the "
 "computer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2232
+#: src/slic3r/GUI/Plater.cpp:2235
 #, possible-c-format, possible-boost-format
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2251 src/slic3r/GUI/Plater.cpp:5280
+#: src/slic3r/GUI/Plater.cpp:2254 src/slic3r/GUI/Plater.cpp:5291
 msgid "New Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2358
+#: src/slic3r/GUI/Plater.cpp:2361
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2440
+#: src/slic3r/GUI/Plater.cpp:2443
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -13266,12 +13889,12 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2597
+#: src/slic3r/GUI/Plater.cpp:2601
 #, possible-boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2617
+#: src/slic3r/GUI/Plater.cpp:2621
 #, possible-c-format, possible-boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -13282,11 +13905,11 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2621
+#: src/slic3r/GUI/Plater.cpp:2625
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2634
+#: src/slic3r/GUI/Plater.cpp:2638
 #, possible-c-format, possible-boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -13299,15 +13922,15 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2638 src/slic3r/GUI/Plater.cpp:2660
+#: src/slic3r/GUI/Plater.cpp:2642 src/slic3r/GUI/Plater.cpp:2664
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2639 src/slic3r/GUI/Plater.cpp:2661
+#: src/slic3r/GUI/Plater.cpp:2643 src/slic3r/GUI/Plater.cpp:2665
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2656
+#: src/slic3r/GUI/Plater.cpp:2660
 #, possible-c-format, possible-boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -13320,217 +13943,221 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2673
+#: src/slic3r/GUI/Plater.cpp:2678
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2676 src/slic3r/GUI/Plater.cpp:2728
+#: src/slic3r/GUI/Plater.cpp:2681 src/slic3r/GUI/Plater.cpp:2739
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2683
+#: src/slic3r/GUI/Plater.cpp:2682
+msgid "Apply to all objects being loaded."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2694
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2684
+#: src/slic3r/GUI/Plater.cpp:2695
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2725
+#: src/slic3r/GUI/Plater.cpp:2736
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2857
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2847
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2927
+#: src/slic3r/GUI/Plater.cpp:2938
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2934
+#: src/slic3r/GUI/Plater.cpp:2945
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2940
+#: src/slic3r/GUI/Plater.cpp:2951
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2946
+#: src/slic3r/GUI/Plater.cpp:2957
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3060
+#: src/slic3r/GUI/Plater.cpp:3071
 msgid "Delete object which is a part of cut object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3061
+#: src/slic3r/GUI/Plater.cpp:3072
 msgid "You try to delete an object which is a part of a cut object."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3062
+#: src/slic3r/GUI/Plater.cpp:3073
 msgid ""
 "This action will break a cut information.\n"
 "After that PrusaSlicer can't guarantee model consistency"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3065
+#: src/slic3r/GUI/Plater.cpp:3076
 msgid "Delete object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3070
+#: src/slic3r/GUI/Plater.cpp:3081
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3089
+#: src/slic3r/GUI/Plater.cpp:3100
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3118
+#: src/slic3r/GUI/Plater.cpp:3129
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3173
+#: src/slic3r/GUI/Plater.cpp:3184
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3180
+#: src/slic3r/GUI/Plater.cpp:3191
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3182
+#: src/slic3r/GUI/Plater.cpp:3193
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3236
+#: src/slic3r/GUI/Plater.cpp:3247
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3238
+#: src/slic3r/GUI/Plater.cpp:3249
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3251
+#: src/slic3r/GUI/Plater.cpp:3262
 msgid "Bed temperatures for the used filaments differ significantly."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3389 src/slic3r/GUI/Plater.cpp:4323
+#: src/slic3r/GUI/Plater.cpp:3400 src/slic3r/GUI/Plater.cpp:4334
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3460
+#: src/slic3r/GUI/Plater.cpp:3471
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3546
+#: src/slic3r/GUI/Plater.cpp:3557
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3564
+#: src/slic3r/GUI/Plater.cpp:3575
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3564 src/slic3r/GUI/Plater.cpp:3648
+#: src/slic3r/GUI/Plater.cpp:3575 src/slic3r/GUI/Plater.cpp:3659
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3640
+#: src/slic3r/GUI/Plater.cpp:3651
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3648
+#: src/slic3r/GUI/Plater.cpp:3659
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3735
+#: src/slic3r/GUI/Plater.cpp:3746
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3766 src/slic3r/GUI/Plater.cpp:5437
-#: src/slic3r/GUI/Plater.cpp:5447
+#: src/slic3r/GUI/Plater.cpp:3777 src/slic3r/GUI/Plater.cpp:5448
+#: src/slic3r/GUI/Plater.cpp:5458
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3767
+#: src/slic3r/GUI/Plater.cpp:3778
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3767
+#: src/slic3r/GUI/Plater.cpp:3778
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3787 src/slic3r/GUI/Plater.cpp:3793
+#: src/slic3r/GUI/Plater.cpp:3798 src/slic3r/GUI/Plater.cpp:3804
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3908
+#: src/slic3r/GUI/Plater.cpp:3919
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3913
+#: src/slic3r/GUI/Plater.cpp:3924
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3931
+#: src/slic3r/GUI/Plater.cpp:3942
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4132 src/slic3r/GUI/Plater.cpp:4138
+#: src/slic3r/GUI/Plater.cpp:4143 src/slic3r/GUI/Plater.cpp:4149
 msgid "You are using template filament preset."
 msgid_plural "You are using template filament presets."
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:4134 src/slic3r/GUI/Plater.cpp:4139
+#: src/slic3r/GUI/Plater.cpp:4145 src/slic3r/GUI/Plater.cpp:4150
 msgid ""
 "Please note that template presets are not customized for specific printer "
 "and should only be used as a starting point for creating your own user "
 "presets."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4135
+#: src/slic3r/GUI/Plater.cpp:4146
 msgid "More info at"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4276
+#: src/slic3r/GUI/Plater.cpp:4287
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4287
+#: src/slic3r/GUI/Plater.cpp:4298
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4332
+#: src/slic3r/GUI/Plater.cpp:4343
 msgid "Slicing Cancelled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4634
+#: src/slic3r/GUI/Plater.cpp:4645
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5072
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5074
 #, possible-boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -13538,239 +14165,274 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5279
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5269
+#: src/slic3r/GUI/Plater.cpp:5280
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5270
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5275
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5309
+#: src/slic3r/GUI/Plater.cpp:5320
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5339
+#: src/slic3r/GUI/Plater.cpp:5350
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5343
+#: src/slic3r/GUI/Plater.cpp:5354
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5373
+#: src/slic3r/GUI/Plater.cpp:5384
 msgid "Import SLA archive"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5437 src/slic3r/GUI/Plater.cpp:5447
+#: src/slic3r/GUI/Plater.cpp:5448 src/slic3r/GUI/Plater.cpp:5458
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5438 src/slic3r/GUI/Plater.cpp:5448
+#: src/slic3r/GUI/Plater.cpp:5449 src/slic3r/GUI/Plater.cpp:5459
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5515
+#: src/slic3r/GUI/Plater.cpp:5484 src/slic3r/GUI/Plater.cpp:5536
+msgid "Unable to open the selected file."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5493 src/slic3r/GUI/Plater.cpp:5545
+#: src/slic3r/GUI/UpdateDialogs.cpp:234
+#, possible-boost-format
+msgid "File %1% already exists. Do you wish to overwrite it?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5501 src/slic3r/GUI/Plater.cpp:5553
+msgid "Unable to open output file."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5512 src/slic3r/GUI/Plater.cpp:5565
+msgid "Error converting G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5520
+msgid "Successfully created G-code ASCII file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5521
+msgid "Convert G-code file to ASCII format"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5573
+msgid "Successfully created G-code binary file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5574
+msgid "Convert G-code file to binary format"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5631
 #, possible-boost-format
 msgid "%1% - Multiple projects file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5525
+#: src/slic3r/GUI/Plater.cpp:5641
 msgid "There are several files being loaded, including Project files."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5525 src/slic3r/GUI/Plater.cpp:5528
+#: src/slic3r/GUI/Plater.cpp:5641 src/slic3r/GUI/Plater.cpp:5644
 msgid "Select an action to apply to all files."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5528
+#: src/slic3r/GUI/Plater.cpp:5644
 msgid "There are several files being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5530 src/slic3r/GUI/Plater.cpp:5926
+#: src/slic3r/GUI/Plater.cpp:5646 src/slic3r/GUI/Plater.cpp:6043
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5551
+#: src/slic3r/GUI/Plater.cpp:5667
 msgid "Import 3D models"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5564
+#: src/slic3r/GUI/Plater.cpp:5680
 msgid "Start a new instance of PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5578
+#: src/slic3r/GUI/Plater.cpp:5694
 msgid "Select one to load as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5589
+#: src/slic3r/GUI/Plater.cpp:5705
 msgid "Select only one file to load the configuration."
 msgstr ""
 
 #. TRN %1% is archive path
-#: src/slic3r/GUI/Plater.cpp:5636
+#: src/slic3r/GUI/Plater.cpp:5752
 #, possible-boost-format
 msgid "Loading of a ZIP archive on path %1% has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5695
+#. TRN: First argument = path to file, second argument = error description
+#: src/slic3r/GUI/Plater.cpp:5812
 #, possible-boost-format
-msgid "Failed to unzip file to %1%: %2% "
+msgid "Failed to unzip file to %1%: %2%"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5705
+#: src/slic3r/GUI/Plater.cpp:5822
 #, possible-boost-format
 msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5905
+#: src/slic3r/GUI/Plater.cpp:6022
 msgid "Load project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5914
+#: src/slic3r/GUI/Plater.cpp:6031
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5915
+#: src/slic3r/GUI/Plater.cpp:6032
 msgid "Import 3D models only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5916
+#: src/slic3r/GUI/Plater.cpp:6033
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5918
+#: src/slic3r/GUI/Plater.cpp:6035
 msgid "Start new PrusaSlicer instance"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5921
+#: src/slic3r/GUI/Plater.cpp:6038
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5942
+#: src/slic3r/GUI/Plater.cpp:6059
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5983
+#: src/slic3r/GUI/Plater.cpp:6100
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5984
+#: src/slic3r/GUI/Plater.cpp:6101
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6078
+#: src/slic3r/GUI/Plater.cpp:6195
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6083
+#: src/slic3r/GUI/Plater.cpp:6200
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6133
+#: src/slic3r/GUI/Plater.cpp:6250
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6144
+#: src/slic3r/GUI/Plater.cpp:6261
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6153
+#: src/slic3r/GUI/Plater.cpp:6270
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6209
+#: src/slic3r/GUI/Plater.cpp:6326
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6267
+#: src/slic3r/GUI/Plater.cpp:6384
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6268
+#: src/slic3r/GUI/Plater.cpp:6385
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6271
+#: src/slic3r/GUI/Plater.cpp:6388
 #, possible-c-format, possible-boost-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6295
+#: src/slic3r/GUI/Plater.cpp:6412
 msgid "Fill bed"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6463
+#: src/slic3r/GUI/Plater.cpp:6580
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6463
+#: src/slic3r/GUI/Plater.cpp:6580
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6473
+#: src/slic3r/GUI/Plater.cpp:6590
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6474
+#: src/slic3r/GUI/Plater.cpp:6591
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6537
+#: src/slic3r/GUI/Plater.cpp:6654
 msgid ""
 "Unable to perform boolean operation on model meshes. Only positive parts "
 "will be exported."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6691
+#: src/slic3r/GUI/Plater.cpp:6808
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6691
+#: src/slic3r/GUI/Plater.cpp:6808
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6735
+#: src/slic3r/GUI/Plater.cpp:6852
 msgid "Unable to save file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6929
+#: src/slic3r/GUI/Plater.cpp:7046
 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6929 src/slic3r/GUI/PrintHostDialogs.cpp:136
+#: src/slic3r/GUI/Plater.cpp:7046 src/slic3r/GUI/PrintHostDialogs.cpp:136
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:7399
+#: src/slic3r/GUI/Plater.cpp:7516
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:7544
+#: src/slic3r/GUI/Plater.cpp:7661
 msgid "Paste From Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:230 src/slic3r/GUI/Tab.cpp:2486
-#: src/slic3r/GUI/Tab.cpp:2755 src/slic3r/GUI/Tab.cpp:2873
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1311
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1866
+#: src/slic3r/GUI/Preferences.cpp:230 src/slic3r/GUI/Tab.cpp:2563
+#: src/slic3r/GUI/Tab.cpp:2867 src/slic3r/GUI/Tab.cpp:2985
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1309
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864
 msgid "General"
 msgstr ""
 
@@ -14123,7 +14785,7 @@ msgstr ""
 msgid "If enabled, you can change size of toolbar icons manually."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:562 src/slic3r/GUI/Tab.cpp:1697
+#: src/slic3r/GUI/Preferences.cpp:562 src/slic3r/GUI/Tab.cpp:1735
 msgid "Other"
 msgstr ""
 
@@ -14267,7 +14929,7 @@ msgid "Add/Remove presets"
 msgstr ""
 
 #: src/slic3r/GUI/PresetComboBoxes.cpp:769
-#: src/slic3r/GUI/PresetComboBoxes.cpp:820 src/slic3r/GUI/Tab.cpp:3603
+#: src/slic3r/GUI/PresetComboBoxes.cpp:820 src/slic3r/GUI/Tab.cpp:3715
 msgid "Add physical printer"
 msgstr ""
 
@@ -14283,7 +14945,7 @@ msgstr ""
 msgid "Show/Hide template presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:800 src/slic3r/GUI/Tab.cpp:3603
+#: src/slic3r/GUI/PresetComboBoxes.cpp:800 src/slic3r/GUI/Tab.cpp:3715
 msgid "Edit physical printer"
 msgstr ""
 
@@ -14678,7 +15340,7 @@ msgid "The name cannot be the same as a preset alias name."
 msgstr ""
 
 #. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/SavePresetDialog.cpp:293 src/slic3r/GUI/Tab.cpp:188
+#: src/slic3r/GUI/SavePresetDialog.cpp:293 src/slic3r/GUI/Tab.cpp:190
 msgid "Save preset"
 msgstr ""
 
@@ -14687,7 +15349,7 @@ msgid "Save presets"
 msgstr ""
 
 #. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/SavePresetDialog.cpp:301 src/slic3r/GUI/Tab.cpp:190
+#: src/slic3r/GUI/SavePresetDialog.cpp:301 src/slic3r/GUI/Tab.cpp:192
 msgid "Rename preset"
 msgstr ""
 
@@ -14729,12 +15391,12 @@ msgid "Just switch to \"%1%\" preset"
 msgstr ""
 
 #: src/slic3r/GUI/Search.cpp:101 src/slic3r/GUI/Search.cpp:395
-#: src/slic3r/GUI/Tab.cpp:2922
+#: src/slic3r/GUI/Tab.cpp:3034
 msgid "Stealth"
 msgstr ""
 
 #: src/slic3r/GUI/Search.cpp:101 src/slic3r/GUI/Search.cpp:395
-#: src/slic3r/GUI/Tab.cpp:2916
+#: src/slic3r/GUI/Tab.cpp:3028
 msgid "Normal"
 msgstr ""
 
@@ -14874,253 +15536,253 @@ msgstr ""
 msgid "Copy to Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:89
+#: src/slic3r/GUI/Tab.cpp:91
 msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:95
+#: src/slic3r/GUI/Tab.cpp:97
 msgid "Select the print profiles this profile is compatible with."
 msgstr ""
 
 #. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/Tab.cpp:186
+#: src/slic3r/GUI/Tab.cpp:188
 msgid "Compare preset with another"
 msgstr ""
 
 #. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/Tab.cpp:193
+#: src/slic3r/GUI/Tab.cpp:195
 msgid "Delete preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:197
+#: src/slic3r/GUI/Tab.cpp:199
 msgid ""
 "Hover the cursor over buttons to find more information \n"
 "or click this button."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:201
+#: src/slic3r/GUI/Tab.cpp:203
 #, possible-boost-format
 msgid "Search in settings [%1%]"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1274
+#: src/slic3r/GUI/Tab.cpp:1282
 msgid "Detach from system preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1287
+#: src/slic3r/GUI/Tab.cpp:1295
 msgid ""
 "A copy of the current system preset will be created, which will be detached "
 "from the system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1288
+#: src/slic3r/GUI/Tab.cpp:1296
 msgid ""
 "The current custom preset will be detached from the parent system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1291
+#: src/slic3r/GUI/Tab.cpp:1299
 msgid "Modifications to the current profile will be saved."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1297
+#: src/slic3r/GUI/Tab.cpp:1305
 msgid "Detach preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1323
+#: src/slic3r/GUI/Tab.cpp:1331
 msgid "This is a default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1325
+#: src/slic3r/GUI/Tab.cpp:1333
 msgid "This is a system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1327
+#: src/slic3r/GUI/Tab.cpp:1335
 msgid "Current preset is inherited from the default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1331
+#: src/slic3r/GUI/Tab.cpp:1339
 msgid "Current preset is inherited from"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1335
+#: src/slic3r/GUI/Tab.cpp:1343
 msgid "It can't be deleted or modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1336
+#: src/slic3r/GUI/Tab.cpp:1344
 msgid ""
 "Any modifications should be saved as a new preset inherited from this one."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1337
+#: src/slic3r/GUI/Tab.cpp:1345
 msgid "To do that please specify a new name for the preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1341
+#: src/slic3r/GUI/Tab.cpp:1349
 msgid "Additional information:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1347
+#: src/slic3r/GUI/Tab.cpp:1355
 msgid "printer model"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1355
+#: src/slic3r/GUI/Tab.cpp:1363
 msgid "default print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1358
+#: src/slic3r/GUI/Tab.cpp:1366
 msgid "default filament profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1372
+#: src/slic3r/GUI/Tab.cpp:1380
 msgid "default SLA material profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1376
+#: src/slic3r/GUI/Tab.cpp:1384
 msgid "default SLA print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1384
+#: src/slic3r/GUI/Tab.cpp:1392
 msgid "full profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1385
+#: src/slic3r/GUI/Tab.cpp:1393
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1423 src/slic3r/GUI/Tab.cpp:5254
+#: src/slic3r/GUI/Tab.cpp:1431 src/slic3r/GUI/Tab.cpp:5393
 msgid "Layers and perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1429
+#: src/slic3r/GUI/Tab.cpp:1437
 msgid "Vertical shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1441
+#: src/slic3r/GUI/Tab.cpp:1449
 msgid "Horizontal shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1447
+#: src/slic3r/GUI/Tab.cpp:1455
 msgid "Minimum shell thickness"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1458
+#: src/slic3r/GUI/Tab.cpp:1466
 msgid "Quality (slower slicing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1475
+#: src/slic3r/GUI/Tab.cpp:1483
 msgid "Fuzzy skin (experimental)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1498
+#: src/slic3r/GUI/Tab.cpp:1506
 msgid "Reducing printing time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1535
+#: src/slic3r/GUI/Tab.cpp:1543
 msgid "Raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1540
+#: src/slic3r/GUI/Tab.cpp:1548
 msgid "Options for support material and raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1559
+#: src/slic3r/GUI/Tab.cpp:1567
 msgid "Organic supports"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1570
+#: src/slic3r/GUI/Tab.cpp:1578
 msgid "Speed for print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1583
+#: src/slic3r/GUI/Tab.cpp:1591
 msgid "Dynamic overhang speed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1590
+#: src/slic3r/GUI/Tab.cpp:1598
 msgid "Speed for non-print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1594
+#: src/slic3r/GUI/Tab.cpp:1602
 msgid "Modifiers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1598
+#: src/slic3r/GUI/Tab.cpp:1606
 msgid "Acceleration control (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1610
+#: src/slic3r/GUI/Tab.cpp:1618
 msgid "Autospeed (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1614
+#: src/slic3r/GUI/Tab.cpp:1622
 msgid "Pressure equalizer (experimental)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1618
+#: src/slic3r/GUI/Tab.cpp:1626
 msgid "Multiple Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1627
+#: src/slic3r/GUI/Tab.cpp:1635
 msgid "Ooze prevention"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1650
+#: src/slic3r/GUI/Tab.cpp:1658
 msgid "Extrusion width"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1660
+#: src/slic3r/GUI/Tab.cpp:1668
 msgid "Overlap"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1663
+#: src/slic3r/GUI/Tab.cpp:1671
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1674
+#: src/slic3r/GUI/Tab.cpp:1684
 msgid "Arachne perimeter generator"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1682 src/slic3r/GUI/Tab.cpp:5303
+#: src/slic3r/GUI/Tab.cpp:1692 src/slic3r/GUI/Tab.cpp:5442
 msgid "Output options"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1683
+#: src/slic3r/GUI/Tab.cpp:1693
 msgid "Sequential printing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685
+#: src/slic3r/GUI/Tab.cpp:1695
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1690 src/slic3r/GUI/Tab.cpp:5304
+#: src/slic3r/GUI/Tab.cpp:1700 src/slic3r/GUI/Tab.cpp:5443
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1721 src/slic3r/GUI/Tab.cpp:1722
-#: src/slic3r/GUI/Tab.cpp:2208 src/slic3r/GUI/Tab.cpp:2209
-#: src/slic3r/GUI/Tab.cpp:2736 src/slic3r/GUI/Tab.cpp:2737
-#: src/slic3r/GUI/Tab.cpp:2814 src/slic3r/GUI/Tab.cpp:2815
-#: src/slic3r/GUI/Tab.cpp:4479 src/slic3r/GUI/Tab.cpp:5136
-#: src/slic3r/GUI/Tab.cpp:5137
+#: src/slic3r/GUI/Tab.cpp:1759 src/slic3r/GUI/Tab.cpp:1760
+#: src/slic3r/GUI/Tab.cpp:2285 src/slic3r/GUI/Tab.cpp:2286
+#: src/slic3r/GUI/Tab.cpp:2848 src/slic3r/GUI/Tab.cpp:2849
+#: src/slic3r/GUI/Tab.cpp:2926 src/slic3r/GUI/Tab.cpp:2927
+#: src/slic3r/GUI/Tab.cpp:4592 src/slic3r/GUI/Tab.cpp:5275
+#: src/slic3r/GUI/Tab.cpp:5276
 msgid "Notes"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1728 src/slic3r/GUI/Tab.cpp:2216
-#: src/slic3r/GUI/Tab.cpp:2743 src/slic3r/GUI/Tab.cpp:2821
-#: src/slic3r/GUI/Tab.cpp:5144 src/slic3r/GUI/Tab.cpp:5309
+#: src/slic3r/GUI/Tab.cpp:1766 src/slic3r/GUI/Tab.cpp:2293
+#: src/slic3r/GUI/Tab.cpp:2855 src/slic3r/GUI/Tab.cpp:2933
+#: src/slic3r/GUI/Tab.cpp:5283 src/slic3r/GUI/Tab.cpp:5448
 msgid "Dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1729 src/slic3r/GUI/Tab.cpp:2217
-#: src/slic3r/GUI/Tab.cpp:2744 src/slic3r/GUI/Tab.cpp:2822
-#: src/slic3r/GUI/Tab.cpp:5145 src/slic3r/GUI/Tab.cpp:5310
+#: src/slic3r/GUI/Tab.cpp:1767 src/slic3r/GUI/Tab.cpp:2294
+#: src/slic3r/GUI/Tab.cpp:2856 src/slic3r/GUI/Tab.cpp:2934
+#: src/slic3r/GUI/Tab.cpp:5284 src/slic3r/GUI/Tab.cpp:5449
 msgid "Profile dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1761
+#: src/slic3r/GUI/Tab.cpp:1799
 msgid "Post processing scripts shall modify G-code file in place."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1840
+#: src/slic3r/GUI/Tab.cpp:1878
 #, possible-c-format, possible-boost-format
 msgid ""
 "The following line %s contains reserved keywords.\n"
@@ -15133,83 +15795,79 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:1845
+#: src/slic3r/GUI/Tab.cpp:1883
 msgid "Found reserved keywords in"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1907
+#: src/slic3r/GUI/Tab.cpp:1982
 msgid "Filament Overrides"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1908 src/slic3r/GUI/Tab.cpp:3116
-msgid "Retraction"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1926
+#: src/slic3r/GUI/Tab.cpp:2001
 msgid "Retraction when tool is disabled"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2073
+#: src/slic3r/GUI/Tab.cpp:2148
 msgid "Temperature"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2077
+#: src/slic3r/GUI/Tab.cpp:2152
 msgid "Nozzle"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2082
+#: src/slic3r/GUI/Tab.cpp:2157
 msgid "Bed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2087
+#: src/slic3r/GUI/Tab.cpp:2162
 msgid "Cooling"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2100
+#: src/slic3r/GUI/Tab.cpp:2175
 msgid "Fan settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2101
+#: src/slic3r/GUI/Tab.cpp:2176
 msgid "Fan speed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2111
+#: src/slic3r/GUI/Tab.cpp:2186
 msgid "Dynamic fan speeds"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2118
+#: src/slic3r/GUI/Tab.cpp:2193
 msgid "Cooling thresholds"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2124
+#: src/slic3r/GUI/Tab.cpp:2199
 msgid "Filament properties"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2131
+#: src/slic3r/GUI/Tab.cpp:2206
 msgid "Print speed override"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2141
+#: src/slic3r/GUI/Tab.cpp:2216
 msgid "Wipe tower parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2144
+#: src/slic3r/GUI/Tab.cpp:2219
 msgid "Toolchange parameters with single extruder MM printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2157
+#: src/slic3r/GUI/Tab.cpp:2232
 msgid "Ramming settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2175
+#: src/slic3r/GUI/Tab.cpp:2250
 msgid "Toolchange parameters with multi extruder MM printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2243
+#: src/slic3r/GUI/Tab.cpp:2320
 msgid "Volumetric flow hints not available"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2447
+#: src/slic3r/GUI/Tab.cpp:2524
 msgid ""
 "Note: All parameters from this group are moved to the Physical Printer "
 "settings (see changelog).\n"
@@ -15222,27 +15880,27 @@ msgid ""
 "physical_printer directory."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2466
+#: src/slic3r/GUI/Tab.cpp:2543
 msgid ""
 "Emitting machine limits to G-code is not supported with Klipper G-code "
 "flavor.\n"
 "The option was switched to \"Use for time estimate\"."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2487 src/slic3r/GUI/Tab.cpp:2756
+#: src/slic3r/GUI/Tab.cpp:2564 src/slic3r/GUI/Tab.cpp:2868
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/UnsavedChangesDialog.cpp:1311
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1866
+#: src/slic3r/GUI/Tab.cpp:2573 src/slic3r/GUI/UnsavedChangesDialog.cpp:1309
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864
 msgid "Capabilities"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2501
+#: src/slic3r/GUI/Tab.cpp:2578
 msgid "Number of extruders of the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2534
+#: src/slic3r/GUI/Tab.cpp:2611
 msgid ""
 "Single Extruder Multi Material is selected, \n"
 "and all extruders must have the same diameter.\n"
@@ -15250,129 +15908,135 @@ msgid ""
 "nozzle diameter value?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2619
+#. TRN: First argument is parameter name, the second one is the value.
+#: src/slic3r/GUI/Tab.cpp:2669
+#, possible-boost-format
+msgid "Invalid value provided for parameter %1%: %2%"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2671 src/slic3r/GUI/Tab.cpp:2730
+msgid "G-code flavor is switched"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2722
 msgid ""
 "The selected G-code flavor does not support the machine limitation for "
 "Stealth mode.\n"
 "Stealth mode will not be applied and will be disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2627
-msgid "G-code flavor is switched"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2656
+#: src/slic3r/GUI/Tab.cpp:2760
 msgid "Start G-Code options"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2763
+#: src/slic3r/GUI/Tab.cpp:2875
 msgid "Display"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2778
+#: src/slic3r/GUI/Tab.cpp:2890
 msgid "Tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2779
+#: src/slic3r/GUI/Tab.cpp:2891
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2786 src/slic3r/GUI/Tab.cpp:5126
+#: src/slic3r/GUI/Tab.cpp:2898 src/slic3r/GUI/Tab.cpp:5265
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2799 src/slic3r/GUI/Tab.cpp:5122
+#: src/slic3r/GUI/Tab.cpp:2911 src/slic3r/GUI/Tab.cpp:5261
 msgid "Exposure"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2806
+#: src/slic3r/GUI/Tab.cpp:2918
 msgid "Output"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2915
+#: src/slic3r/GUI/Tab.cpp:3027
 msgid "Values in this column are for Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2921
+#: src/slic3r/GUI/Tab.cpp:3033
 msgid "Values in this column are for Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2930
+#: src/slic3r/GUI/Tab.cpp:3042
 msgid "Maximum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2935
+#: src/slic3r/GUI/Tab.cpp:3047
 msgid "Maximum accelerations"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2944
+#: src/slic3r/GUI/Tab.cpp:3056
 msgid "Jerk limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2950
+#: src/slic3r/GUI/Tab.cpp:3062
 msgid "Minimum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2991
+#: src/slic3r/GUI/Tab.cpp:3103
 msgid ""
 "This is a single extruder multimaterial printer, diameters of all extruders "
 "will be set to the new value. Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3028
+#: src/slic3r/GUI/Tab.cpp:3140
 msgid "Reset to Filament Color"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3064
+#: src/slic3r/GUI/Tab.cpp:3176
 msgid "Apply below setting to other extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3109
+#: src/slic3r/GUI/Tab.cpp:3221
 msgid "Layer height limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3113
+#: src/slic3r/GUI/Tab.cpp:3225
 msgid "Position (for multi-extruder printers)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3119
+#: src/slic3r/GUI/Tab.cpp:3231
 msgid "Only lift Z"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3132
+#: src/slic3r/GUI/Tab.cpp:3244
 msgid ""
 "Retraction when tool is disabled (advanced settings for multi-extruder "
 "setups)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3189 src/slic3r/GUI/Tab.cpp:3198
+#: src/slic3r/GUI/Tab.cpp:3301 src/slic3r/GUI/Tab.cpp:3310
 msgid "Single extruder MM setup"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3199
+#: src/slic3r/GUI/Tab.cpp:3311
 msgid "Single extruder multimaterial parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3364
+#: src/slic3r/GUI/Tab.cpp:3476
 msgid ""
 "The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
 "Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3366
+#: src/slic3r/GUI/Tab.cpp:3478
 msgid "Firmware Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3675
+#: src/slic3r/GUI/Tab.cpp:3787
 msgid "New printer preset selected"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4058
+#: src/slic3r/GUI/Tab.cpp:4170
 msgid "Detached"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4154
+#: src/slic3r/GUI/Tab.cpp:4266
 msgid ""
 "The physical printer below is based on the preset, you are going to rename."
 msgid_plural ""
@@ -15380,33 +16044,33 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4159
+#: src/slic3r/GUI/Tab.cpp:4271
 msgid "Note, that the selected preset will be renamed in this printer too."
 msgid_plural ""
 "Note, that the selected preset will be renamed in these printers too."
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4221
+#: src/slic3r/GUI/Tab.cpp:4333
 msgid "remove"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4221
+#: src/slic3r/GUI/Tab.cpp:4333
 msgid "delete"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4229
+#: src/slic3r/GUI/Tab.cpp:4341
 msgid "It's a last preset for this physical printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4234
+#: src/slic3r/GUI/Tab.cpp:4346
 #, possible-boost-format
 msgid ""
 "Are you sure you want to delete \"%1%\" preset from the physical printer "
 "\"%2%\"?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4246
+#: src/slic3r/GUI/Tab.cpp:4358
 msgid ""
 "The physical printer below is based on the preset, you are going to delete."
 msgid_plural ""
@@ -15414,14 +16078,14 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4251
+#: src/slic3r/GUI/Tab.cpp:4363
 msgid "Note, that the selected preset will be deleted from this printer too."
 msgid_plural ""
 "Note, that the selected preset will be deleted from these printers too."
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4256
+#: src/slic3r/GUI/Tab.cpp:4368
 msgid ""
 "The physical printer below is based only on the preset, you are going to "
 "delete."
@@ -15431,7 +16095,7 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4261
+#: src/slic3r/GUI/Tab.cpp:4373
 msgid ""
 "Note, that this printer will be deleted after deleting the selected preset."
 msgid_plural ""
@@ -15440,84 +16104,84 @@ msgstr[0] ""
 msgstr[1] ""
 
 #. TRN "remove/delete"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4379
 #, possible-boost-format
 msgid "Are you sure you want to %1% the selected preset?"
 msgstr ""
 
 #. TRN Settings Tabs: Button in toolbar: "Remove/Delete"
-#: src/slic3r/GUI/Tab.cpp:4272
+#: src/slic3r/GUI/Tab.cpp:4384
 #, possible-boost-format
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4358 src/slic3r/GUI/Tab.cpp:4720
+#: src/slic3r/GUI/Tab.cpp:4470 src/slic3r/GUI/Tab.cpp:4855
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4477
+#: src/slic3r/GUI/Tab.cpp:4590
 msgid "Find"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4478
+#: src/slic3r/GUI/Tab.cpp:4591
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4567
+#: src/slic3r/GUI/Tab.cpp:4682
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4571
+#: src/slic3r/GUI/Tab.cpp:4686
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4575
+#: src/slic3r/GUI/Tab.cpp:4690
 msgid "Whole word"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4579
+#: src/slic3r/GUI/Tab.cpp:4694
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4682
+#: src/slic3r/GUI/Tab.cpp:4817
 msgid "Are you sure you want to delete all substitutions?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4820
+#: src/slic3r/GUI/Tab.cpp:4955
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4823
+#: src/slic3r/GUI/Tab.cpp:4958
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4827
+#: src/slic3r/GUI/Tab.cpp:4962
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4849
+#: src/slic3r/GUI/Tab.cpp:4984
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4851
+#: src/slic3r/GUI/Tab.cpp:4986
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4853
+#: src/slic3r/GUI/Tab.cpp:4988
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4855
+#: src/slic3r/GUI/Tab.cpp:4990
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -15525,23 +16189,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4860
+#: src/slic3r/GUI/Tab.cpp:4995
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4862
+#: src/slic3r/GUI/Tab.cpp:4997
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4865
+#: src/slic3r/GUI/Tab.cpp:5000
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4867
+#: src/slic3r/GUI/Tab.cpp:5002
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -15549,13 +16213,22 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4877
+#: src/slic3r/GUI/Tab.cpp:5007
+msgid "EDIT VALUE"
+msgstr ""
+
+#. TRN Description for "EDIT VALUE" in the Help dialog (the icon is currently used only to edit custom gcodes).
+#: src/slic3r/GUI/Tab.cpp:5009
+msgid "clicking this icon opens a dialog allowing to edit this value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:5016
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4879
+#: src/slic3r/GUI/Tab.cpp:5018
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -15563,17 +16236,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4882
+#: src/slic3r/GUI/Tab.cpp:5021
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4885
+#: src/slic3r/GUI/Tab.cpp:5024
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4887
+#: src/slic3r/GUI/Tab.cpp:5026
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -15581,61 +16254,61 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4893
+#: src/slic3r/GUI/Tab.cpp:5032
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4894
+#: src/slic3r/GUI/Tab.cpp:5033
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4900
+#: src/slic3r/GUI/Tab.cpp:5039
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4901
+#: src/slic3r/GUI/Tab.cpp:5040
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5078 src/slic3r/GUI/Tab.cpp:5080
+#: src/slic3r/GUI/Tab.cpp:5217 src/slic3r/GUI/Tab.cpp:5219
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5165 src/slic3r/GUI/Tab.cpp:5166
+#: src/slic3r/GUI/Tab.cpp:5304 src/slic3r/GUI/Tab.cpp:5305
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5215
+#: src/slic3r/GUI/Tab.cpp:5354
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5220
+#: src/slic3r/GUI/Tab.cpp:5359
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5243
+#: src/slic3r/GUI/Tab.cpp:5382
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5267
+#: src/slic3r/GUI/Tab.cpp:5406
 msgid "Branching"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5269
+#: src/slic3r/GUI/Tab.cpp:5408
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5337
+#: src/slic3r/GUI/Tab.cpp:5476
 #, possible-boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -15679,7 +16352,7 @@ msgid "Keep"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1580
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1578
 msgid "Transfer"
 msgstr ""
 
@@ -15719,7 +16392,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:973
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1784
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1782
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
@@ -15754,106 +16427,106 @@ msgstr ""
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1246
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1244
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1252
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1250
 #, possible-boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1256
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1254
 #, possible-boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1257
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1255
 #, possible-boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1306
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1862
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1304
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1335
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1333
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1525
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1523
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1544
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1542
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1556
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1554
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1557
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1555
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1606
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1604
 msgid ""
 "Transfer the selected options from left preset to the right.\n"
 "Note: New modified presets will be selected in settings tabs after close "
 "this dialog."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1614
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1612
 msgid "Save the selected options from left preset to the right."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1632
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1630
 msgid "Transfer values from left to right"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1633
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1631
 msgid ""
 "If enabled, this dialog can be used for transver selected values from left "
 "to right preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1819
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1817
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1830
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1828
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1844
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1842
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1852
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1850
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1874
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1874
 msgid "Undef group"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2028
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2026
 msgid "Modified"
 msgstr ""
 
@@ -15948,11 +16621,6 @@ msgstr ""
 msgid "Failed to create directory."
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:234
-#, possible-boost-format
-msgid "File %1% already exists. Do you wish to overwrite it?"
-msgstr ""
-
 #: src/slic3r/GUI/UpdateDialogs.cpp:239
 #, possible-boost-format
 msgid "Download path is %1%. Do you wish to continue?"