diff --git a/resources/profiles/TriLAB.idx b/resources/profiles/TriLAB.idx
index 1cf505da2f..6eacacb360 100644
--- a/resources/profiles/TriLAB.idx
+++ b/resources/profiles/TriLAB.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 2.3.0-alpha3
+0.0.5 Removed obsolete host keys.
 0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials
 0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
 min_slic3r_version = 2.3.0-alpha0
diff --git a/resources/profiles/TriLAB.ini b/resources/profiles/TriLAB.ini
index 959190e35c..49ba73f6cd 100644
--- a/resources/profiles/TriLAB.ini
+++ b/resources/profiles/TriLAB.ini
@@ -6,7 +6,7 @@
 name = TriLAB
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.4
+config_version = 0.0.5
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -713,21 +713,17 @@ extra_loading_move = -2
 extruder_colour = #FF0000
 extruder_offset = 0x0
 gcode_flavor = repetier
-host_type = octoprint
 layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
 max_layer_height = 0.25
 max_print_height = 320
 min_layer_height = 0.15
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
-print_host = 
 printer_model = 
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL
 printer_settings_id = 
 printer_variant = 
-printer_vendor = TriLAB Group s.r.o.
-printhost_apikey = 
-printhost_cafile = 
+printer_vendor = TriLAB Group s.r.o. 
 remaining_times = 0
 retract_before_travel = 3
 retract_before_wipe = 100%
@@ -740,8 +736,6 @@ retract_lift_below = 319
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 30
-serial_port = 
-serial_speed = 250000
 silent_mode = 0
 single_extruder_multi_material = 0
 start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder