Add the default/custom switch into project settings

src/libslic3r/PresetBundle.cpp

@@ -38,7 +38,8 @@ namespace Slic3r {
 
 static std::vector<std::string> s_project_options {
     "colorprint_heights",
-    "wiping_volumes_matrix"
+    "wiping_volumes_matrix",
+    "wiping_volumes_use_custom_matrix"
 };
 
 const char *PresetBundle::PRUSA_BUNDLE = "PrusaResearch";

src/libslic3r/Print.cpp

@@ -246,6 +246,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
             || opt_key == "wipe_tower_no_sparse_layers"
             || opt_key == "wipe_tower_extruder"
             || opt_key == "wiping_volumes_matrix"
+            || opt_key == "wiping_volumes_use_custom_matrix"
             || opt_key == "parking_pos_retraction"
             || opt_key == "cooling_tube_retraction"
             || opt_key == "cooling_tube_length"

src/libslic3r/PrintConfig.cpp

@@ -3310,6 +3310,11 @@ void PrintConfigDef::init_fff_params()
                                                     140., 140., 140.,   0., 140.,
                                                     140., 140., 140., 140.,   0. });
 
+    def = this->add("wiping_volumes_use_custom_matrix", coBool);
+    def->label = L("");
+    def->tooltip = L("");
+    def->set_default_value(new ConfigOptionBool{ false });
+
     def = this->add("wipe_tower_x", coFloat);
     def->label = L("Position X");
     def->tooltip = L("X coordinate of the left front corner of a wipe tower");
@@ -4526,6 +4531,26 @@ void PrintConfigDef::handle_legacy_composite(DynamicPrintConfig &config)
             config.set_key_value("thumbnails", new ConfigOptionString(thumbnails_str));
         }
     }
+
+    if (config.has("wiping_volumes_matrix") && !config.has("wiping_volumes_use_custom_matrix")) {
+        // This is apparently some pre-2.7.3 config, where the wiping_volumes_matrix was always used.
+        // The 2.7.3 introduced an option to use defaults derived from config. In case the matrix
+        // contains only default values, switch it to default behaviour. The default values
+        // were zeros on the diagonal and 140 otherwise.
+        std::vector<double> matrix = config.opt<ConfigOptionFloats>("wiping_volumes_matrix")->values;
+        int num_of_extruders = int(std::sqrt(matrix.size()) + 0.5);
+        int i = -1;
+        bool custom = false;
+        for (int j = 0; j < int(matrix.size()); ++j) {
+            if (j % num_of_extruders == 0)
+                ++i;
+            if (i != j % num_of_extruders && !is_approx(matrix[j], 140.)) {
+                custom = true;
+                break;
+            }
+        }
+        config.set_key_value("wiping_volumes_use_custom_matrix", new ConfigOptionBool(custom));
+    }
 }
 
 const PrintConfigDef print_config_def;

src/libslic3r/PrintConfig.hpp

@@ -883,6 +883,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionFloat,              wipe_tower_bridging))
     ((ConfigOptionInt,                wipe_tower_extruder))
     ((ConfigOptionFloats,             wiping_volumes_matrix))
+    ((ConfigOptionBool,               wiping_volumes_use_custom_matrix))
     ((ConfigOptionFloat,              z_offset))
 )
 

src/slic3r/GUI/Plater.cpp

@@ -520,6 +520,7 @@ FreqChangedParams::FreqChangedParams(wxWindow* parent) :
         {
             PresetBundle* preset_bundle = wxGetApp().preset_bundle;
             DynamicPrintConfig& project_config = preset_bundle->project_config;
+            const bool use_custom_matrix = (project_config.option<ConfigOptionBool>("wiping_volumes_use_custom_matrix"))->value;
             const std::vector<double> &init_matrix = (project_config.option<ConfigOptionFloats>("wiping_volumes_matrix"))->values;
             const std::vector<std::string> extruder_colours = wxGetApp().plater()->get_extruder_colors_from_plater_config();
 
@@ -527,11 +528,12 @@ FreqChangedParams::FreqChangedParams(wxWindow* parent) :
             const double default_purge = static_cast<const ConfigOptionFloat*>(preset_bundle->printers.get_edited_preset().config.option("multimaterial_purging"))->value;
             std::vector<double> filament_purging_multipliers = preset_bundle->get_config_options_for_current_filaments<ConfigOptionPercents>("filament_purge_multiplier");
 
-            WipingDialog dlg(parent, cast<float>(init_matrix), extruder_colours, default_purge, filament_purging_multipliers);
+            WipingDialog dlg(parent, cast<float>(init_matrix), extruder_colours, default_purge, filament_purging_multipliers, use_custom_matrix);
 
             if (dlg.ShowModal() == wxID_OK) {
                 std::vector<float> matrix = dlg.get_matrix();
                 (project_config.option<ConfigOptionFloats>("wiping_volumes_matrix"))->values = std::vector<double>(matrix.begin(), matrix.end());
+                (project_config.option<ConfigOptionBool>("wiping_volumes_use_custom_matrix"))->value = dlg.get_use_custom_matrix();
                 // Update Project dirty state, update application title bar.
                 wxGetApp().plater()->update_project_dirty_from_presets();
                 wxPostEvent(parent, SimpleEvent(EVT_SCHEDULE_BACKGROUND_PROCESS, parent));

src/slic3r/GUI/WipeTowerDialog.cpp

@@ -190,7 +190,7 @@ std::string RammingPanel::get_parameters()
 
 // Parent dialog for purging volume adjustments - it fathers WipingPanel widget (that contains all controls) and a button.
 WipingDialog::WipingDialog(wxWindow* parent, const std::vector<float>& matrix, const std::vector<std::string>& extruder_colours,
-                           double printer_purging_volume, const std::vector<double>& filament_purging_multipliers)
+                           double printer_purging_volume, const std::vector<double>& filament_purging_multipliers, bool use_custom_matrix)
     : wxDialog(parent, wxID_ANY, _(L("Wipe tower - Purging volume adjustment")), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE/* | wxRESIZE_BORDER*/)
 {
     SetFont(wxGetApp().normal_font());
@@ -252,9 +252,8 @@ WipingDialog::WipingDialog(wxWindow* parent, const std::vector<float>& matrix, c
         enable_or_disable_panel();
     });
 
-    const bool start_default = should_start_as_default();
+    m_radio_button1->SetValue(! use_custom_matrix);
-    m_radio_button1->SetValue(start_default);
+    m_radio_button2->SetValue(use_custom_matrix);
-    m_radio_button2->SetValue(! start_default);
     enable_or_disable_panel();
 
     this->Show();
@@ -394,13 +393,6 @@ std::vector<float> WipingPanel::read_matrix_values() {
 }
 
 
-
-bool WipingDialog::should_start_as_default() const
-{
-    return true;
-}
-
-
 void WipingDialog::enable_or_disable_panel()
 {
     bool enable = m_radio_button2->GetValue();

src/slic3r/GUI/WipeTowerDialog.hpp

@@ -76,12 +76,12 @@ private:
 class WipingDialog : public wxDialog {
 public:
     WipingDialog(wxWindow* parent, const std::vector<float>& matrix, const std::vector<std::string>& extruder_colours,
-                 double printer_purging_volume, const std::vector<double>& filament_purging_multipliers);
+                 double printer_purging_volume, const std::vector<double>& filament_purging_multipliers, bool use_custom_matrix);
     std::vector<float> get_matrix() const    { return m_output_matrix; }
+    bool get_use_custom_matrix() const       { return m_radio_button2->GetValue(); }
 
 
 private:
-    bool should_start_as_default() const;
     void enable_or_disable_panel();
 
     WipingPanel*       m_panel_wiping  = nullptr;