diff --git a/resources/profiles/CocoaPress.idx b/resources/profiles/CocoaPress.idx new file mode 100644 index 0000000000..e0ed4d8d30 --- /dev/null +++ b/resources/profiles/CocoaPress.idx @@ -0,0 +1,2 @@ +min_slic3r_version = 2.6.0-alpha2 +1.0.0 Initial diff --git a/resources/profiles/CocoaPress.ini b/resources/profiles/CocoaPress.ini new file mode 100644 index 0000000000..06b1a17330 --- /dev/null +++ b/resources/profiles/CocoaPress.ini @@ -0,0 +1,604 @@ +# Print profiles for the Creality printers. + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = Cocoa Press +# Configuration version of this file. Config file will only be installed, if the config_version differs. +# This means, the server may force the PrusaSlicer configuration to be downgraded. +config_version = 1.0.0 +# Where to get the updates from? +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/CocoaPress/ +# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% + +# The printer models will be shown by the Configuration Wizard in this order, +# also the first model installed & the first nozzle installed will be activated after install. +# Printer model name will be shown by the installation wizard. + +# All presets starting with asterisk, for example *common*, are intermediate and they will +# not make it into the user interface. + +[printer_model:Cocoa_Press] +name = Cocoa Press +variants = 0.8; 1.6 +technology = FFF +bed_model = minichef_bed.stl +bed_texture = minichef_texture.svg +default_materials = Cocoa Press Chocolates; +thumbnail = CocoaPress_MiniChef.png + +[print:*common*] +gcode_label_objects = 1 +gcode_resolution = 0.0125 +gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";$1$2M0;r;"Pause command allows you to get a full screen message." +output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode +notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE + +[print:Cocoa Press (0.5mm layerheight)] +inherit = *common* +avoid_crossing_curled_overhangs = 0 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = rectilinear +bottom_solid_layers = 2 +bottom_solid_min_thickness = 0 +bridge_acceleration = 1500 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 20 +brim_separation = 0 +brim_type = outer_only +brim_width = 0 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==0.8 +complete_objects = 0 +default_acceleration = 1500 +dont_support_bridges = 1 +draft_shield = disabled +elefant_foot_compensation = 0 +enable_dynamic_overhang_speeds = 0 +external_perimeter_acceleration = 0 +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 1 +extra_perimeters_on_overhangs = 0 +extruder_clearance_height = 60 +extruder_clearance_radius = 65 +extrusion_width = 0 +fill_angle = 45 +fill_density = 25% +fill_pattern = grid +first_layer_acceleration = 1500 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.4 +first_layer_speed = 15 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 0 +gap_fill_speed = 0 +gcode_comments = 0 +infill_acceleration = 1500 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_overlap = 50% +infill_speed = 40 +inherits = +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.5 +max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_bead_width = 85% +min_feature_size = 25% +min_skirt_length = 0 +mmu_segmented_region_max_width = 0 +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +overhang_speed_0 = 15 +overhang_speed_1 = 15 +overhang_speed_2 = 20 +overhang_speed_3 = 25 +overhangs = 1 +perimeter_acceleration = 1500 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_generator = arachne +perimeter_speed = 35 +perimeters = 2 +post_process = +print_settings_id = 0.5mm Speed2 +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = rear +single_extruder_multi_material_priming = 1 +skirt_distance = 5 +skirt_height = 1 +skirts = 0 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 20 +solid_infill_acceleration = 0 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 40 +spiral_vase = 0 +staggered_inner_seams = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 0 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = honeycomb +support_material_spacing = 5 +support_material_speed = 25 +support_material_style = organic +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 0 +support_material_xy_spacing = 50% +support_tree_angle = 40 +support_tree_angle_slow = 25 +support_tree_branch_diameter = 2 +support_tree_branch_diameter_angle = 5 +support_tree_branch_diameter_double_wall = 3 +support_tree_branch_distance = 1 +support_tree_tip_diameter = 0.8 +support_tree_top_rate = 15% +thick_bridges = 1 +thin_walls = 0 +threads = 12 +top_fill_pattern = rectilinear +top_infill_extrusion_width = 0 +top_solid_infill_acceleration = 0 +top_solid_infill_speed = 25 +top_solid_layers = 5 +top_solid_min_thickness = 0 +travel_acceleration = 0 +travel_speed = 100 +travel_speed_z = 0 +wall_distribution_count = 1 +wall_transition_angle = 10 +wall_transition_filter_deviation = 25% +wall_transition_length = 100% +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_cone_angle = 0 +wipe_tower_extra_spacing = 100% +wipe_tower_extruder = 0 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:Cocoa Press (1.0mm layerheight)] +inherit = *common* +avoid_crossing_curled_overhangs = 0 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = rectilinear +bottom_solid_layers = 1 +bottom_solid_min_thickness = 0 +bridge_acceleration = 1500 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 20 +brim_separation = 0 +brim_type = outer_only +brim_width = 0 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==1.6 +complete_objects = 0 +default_acceleration = 1500 +dont_support_bridges = 1 +draft_shield = disabled +elefant_foot_compensation = 0 +enable_dynamic_overhang_speeds = 0 +external_perimeter_acceleration = 0 +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 1 +extra_perimeters_on_overhangs = 0 +extruder_clearance_height = 60 +extruder_clearance_radius = 65 +extrusion_width = 0 +fill_angle = 45 +fill_density = 25% +fill_pattern = grid +first_layer_acceleration = 1500 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.8 +first_layer_speed = 15 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 0 +gap_fill_speed = 0 +gcode_comments = 0 +infill_acceleration = 1500 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_overlap = 70% +infill_speed = 40 +inherits = +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 1 +max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_bead_width = 85% +min_feature_size = 25% +min_skirt_length = 0 +mmu_segmented_region_max_width = 0 +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +overhang_speed_0 = 15 +overhang_speed_1 = 15 +overhang_speed_2 = 20 +overhang_speed_3 = 25 +overhangs = 1 +perimeter_acceleration = 1500 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_generator = arachne +perimeter_speed = 35 +perimeters = 1 +post_process = +print_settings_id = 0.5mm Speed2 +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = rear +single_extruder_multi_material_priming = 1 +skirt_distance = 5 +skirt_height = 1 +skirts = 0 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 20 +solid_infill_acceleration = 0 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 40 +spiral_vase = 0 +staggered_inner_seams = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 0 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = honeycomb +support_material_spacing = 5 +support_material_speed = 25 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 0 +support_material_xy_spacing = 50% +support_tree_angle = 40 +support_tree_angle_slow = 25 +support_tree_branch_diameter = 2 +support_tree_branch_diameter_angle = 5 +support_tree_branch_diameter_double_wall = 3 +support_tree_branch_distance = 1 +support_tree_tip_diameter = 0.8 +support_tree_top_rate = 15% +thick_bridges = 1 +thin_walls = 0 +threads = 12 +top_fill_pattern = rectilinear +top_infill_extrusion_width = 0 +top_solid_infill_acceleration = 0 +top_solid_infill_speed = 25 +top_solid_layers = 3 +top_solid_min_thickness = 0 +travel_acceleration = 0 +travel_speed = 100 +travel_speed_z = 0 +wall_distribution_count = 1 +wall_transition_angle = 10 +wall_transition_filter_deviation = 25% +wall_transition_length = 100% +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_cone_angle = 0 +wipe_tower_extra_spacing = 100% +wipe_tower_extruder = 0 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[filament:*common*] +bed_temperature = 0 +bridge_fan_speed = 0 +cooling = 0 +disable_fan_first_layers = 3 +enable_dynamic_fan_speeds = 0 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_colour = #7B3E00 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 70 +filament_density = 1.2912 +filament_deretract_speed = nil +filament_diameter = 22.66 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Cocoa Press +filament_wipe = 1 +first_layer_bed_temperature = 0 +first_layer_temperature = 0 +full_fan_speed_layer = 0 +idle_temperature = nil +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +overhang_fan_speed_0 = 0 +overhang_fan_speed_1 = 0 +overhang_fan_speed_2 = 0 +overhang_fan_speed_3 = 0 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" + +[filament:Cocoa Press Chocolates] +inherits = *common* +temperature = 0 +filament_vendor = Cocoa Press +filament_settings_id = "Cocoa Press Chocolate" +filament_type = CHOCOLATE +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ + +[printer:*0.8mm*] +printer_variant = 0.8 +default_print_profile = 0.5 +autoemit_temperature_commands = 0 +bed_shape = 0x0,140x0,140x150,0x150 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n +between_objects_gcode = +color_change_gcode = ;G1 E-.05 F900\n;G1 X2.5 Y2.5 F4500 ;Move to the side\nM25 load new chocolate ;pause for user\n;G1 E.06 F900\n;G1 X2.6 Y2.6 F4500 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 15 +end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y145\nM84 +extra_loading_move = -2 +extruder_colour = #FFE3CA +extruder_offset = 0x0 +high_current_on_filament_swap = 0 +host_type = octoprint +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 1500 +machine_max_acceleration_extruding = 1500 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1500 +machine_max_acceleration_y = 1500 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 0.8 +max_print_height = 150 +min_layer_height = 0.2 +nozzle_diameter = 0.8 +parking_pos_retraction = 92 +pause_print_gcode = ; end pause print +print_host = +printer_settings_id = cocoa_press_minichef_settings_0_8 +printer_technology = FFF +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 0 +retract_before_travel = 3 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 1 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 15 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28 ; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing + loading mesh\nG29 O V4 ; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y148\nG1 Z.5\nG1 E1.25 F450\nG1 X8.25 Y148 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y145 F900\nG1 X131.25 Y145 E.10538\nG1 X141.75 Y145 +template_custom_gcode = +thumbnails = 64x64,400x300 +thumbnails_format = PNG +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:*1.6mm*] +printer_variant = 1.6 +autoemit_temperature_commands = 0 +bed_shape = 0x0,140x0,140x150,0x150 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n +between_objects_gcode = +color_change_gcode = ;G1 E-.05 F900\n;G1 X2.5 Y2.5 F4500 ;Move to the side\nM25 load new chocolate ;pause for user\n;G1 E.06 F900\n;G1 X2.6 Y2.6 F4500 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_print_profile = 1.0 +deretract_speed = 15 +end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y145\nM84 +extra_loading_move = -2 +extruder_colour = #FFE3CA +extruder_offset = 0x0 +high_current_on_filament_swap = 0 +host_type = octoprint +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 1500 +machine_max_acceleration_extruding = 1500 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 1500 +machine_max_acceleration_y = 1500 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 1.6 +max_print_height = 150 +min_layer_height = 0.2 +nozzle_diameter = 1.6 +parking_pos_retraction = 92 +pause_print_gcode = ; end pause gcode +print_host = +printer_settings_id = cocoa_press_minichef_settings_1_6 +printer_technology = FFF +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 0 +retract_before_travel = 3 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 1 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 15 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28 ; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing loading mesh\nG29 O V4; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line\n\nG1 X5.8 Y 145\nG1 Z1 ; small z-hop to avoid potentially big purge getting caught.\nG1 E1.25 F450\nG1 X134.2 Y145 E.44109 F900 +template_custom_gcode = +thumbnails = 64x64,400x300 +thumbnails_format = PNG +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:Cocoa Press｜0.8mm] +inherits = *common*; *0.8mm* +printer_model = Cocoa_Press + +[printer:Cocoa Press｜1.6mm] +inherits = *common*; *1.6mm* +printer_model = Cocoa_Press + +[printer:*common*] +default_filament_profile = "Cocoa Press Chocolates" +printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE +gcode_flavor = marlin2 diff --git a/resources/profiles/CocoaPress/CocoaPress_MiniChef.png b/resources/profiles/CocoaPress/CocoaPress_MiniChef.png new file mode 100644 index 0000000000..176844ff97 Binary files /dev/null and b/resources/profiles/CocoaPress/CocoaPress_MiniChef.png differ diff --git a/resources/profiles/CocoaPress/minichef_bed.stl b/resources/profiles/CocoaPress/minichef_bed.stl new file mode 100644 index 0000000000..ffb0f08ff0 Binary files /dev/null and b/resources/profiles/CocoaPress/minichef_bed.stl differ diff --git a/resources/profiles/CocoaPress/minichef_texture.svg b/resources/profiles/CocoaPress/minichef_texture.svg new file mode 100644 index 0000000000..524fc211c0 --- /dev/null +++ b/resources/profiles/CocoaPress/minichef_texture.svg @@ -0,0 +1,39 @@ + +bedshapething.dxf - scale = 1.000000, origin = (0.000000, 0.000000), method = manual diff --git a/resources/profiles/LNL3D.idx b/resources/profiles/LNL3D.idx index ed09fd98b6..edc4cac538 100644 --- a/resources/profiles/LNL3D.idx +++ b/resources/profiles/LNL3D.idx @@ -1,2 +1,3 @@ min_slic3r_version = 2.6.0 +0.0.2 Updated initial layer heights. 0.0.1 Initial version diff --git a/resources/profiles/LNL3D.ini b/resources/profiles/LNL3D.ini index b00278896c..595fe33eab 100644 --- a/resources/profiles/LNL3D.ini +++ b/resources/profiles/LNL3D.ini @@ -10,7 +10,7 @@ name = LNL3D # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 0.0.1 +config_version = 0.0.2 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LNL3D/ @@ -282,7 +282,7 @@ top_solid_layers = 4 perimeters = 4 support_material_interface_spacing = 0.15 support_material_spacing = 1 -first_layer_height = 0.2 +first_layer_height = 0.12 extrusion_width = 0.22 external_perimeter_extrusion_width = 0.2 first_layer_extrusion_width = 0.2 @@ -296,7 +296,7 @@ support_material_extrusion_width = 0.18 perimeters = 3 support_material_interface_spacing = 0.2 support_material_spacing = 1 -first_layer_height = 0.2 +first_layer_height = 0.24 extrusion_width = 0.44 external_perimeter_extrusion_width = 0.42 first_layer_extrusion_width = 0.42 @@ -310,7 +310,7 @@ support_material_extrusion_width = 0.36 perimeters = 2 support_material_interface_spacing = 0.3 support_material_spacing = 1.2 -first_layer_height = 0.3 +first_layer_height = 0.36 extrusion_width = 0.66 external_perimeter_extrusion_width = 0.63 first_layer_extrusion_width = 0.63 @@ -324,7 +324,7 @@ support_material_extrusion_width = 0.54 perimeters = 2 support_material_interface_spacing = 0.3 support_material_spacing = 1.2 -first_layer_height = 0.3 +first_layer_height = 0.48 extrusion_width = 0.88 external_perimeter_extrusion_width = 0.85 first_layer_extrusion_width = 0.85 diff --git a/src/libslic3r/Format/AnycubicSLA.cpp b/src/libslic3r/Format/AnycubicSLA.cpp index ae4c07e59d..1fdddf9aa1 100644 --- a/src/libslic3r/Format/AnycubicSLA.cpp +++ b/src/libslic3r/Format/AnycubicSLA.cpp @@ -110,21 +110,21 @@ typedef struct anycubicsla_format_header { char tag[12]; std::uint32_t payload_size; - std::float_t pixel_size_um; - std::float_t layer_height_mm; - std::float_t exposure_time_s; - std::float_t delay_before_exposure_s; - std::float_t bottom_exposure_time_s; - std::float_t bottom_layer_count; - std::float_t lift_distance_mm; - std::float_t lift_speed_mms; - std::float_t retract_speed_mms; - std::float_t volume_ml; + float pixel_size_um; + float layer_height_mm; + float exposure_time_s; + float delay_before_exposure_s; + float bottom_exposure_time_s; + float bottom_layer_count; + float lift_distance_mm; + float lift_speed_mms; + float retract_speed_mms; + float volume_ml; std::uint32_t antialiasing; std::uint32_t res_x; std::uint32_t res_y; - std::float_t weight_g; - std::float_t price; + float weight_g; + float price; std::uint32_t price_currency; std::uint32_t per_layer_override; // ? unknown meaning ? std::uint32_t print_time_s; @@ -155,19 +155,19 @@ typedef struct anycubicsla_format_layer { std::uint32_t image_offset; std::uint32_t image_size; - std::float_t lift_distance_mm; - std::float_t lift_speed_mms; - std::float_t exposure_time_s; - std::float_t layer_height_mm; - std::float_t layer44; // unkown - usually 0 - std::float_t layer48; // unkown - usually 0 + float lift_distance_mm; + float lift_speed_mms; + float exposure_time_s; + float layer_height_mm; + float layer44; // unkown - usually 0 + float layer48; // unkown - usually 0 } anycubicsla_format_layer; typedef struct anycubicsla_format_misc { - std::float_t bottom_layer_height_mm; - std::float_t bottom_lift_distance_mm; - std::float_t bottom_lift_speed_mms; + float bottom_layer_height_mm; + float bottom_lift_distance_mm; + float bottom_lift_speed_mms; } anycubicsla_format_misc; @@ -198,9 +198,9 @@ private: namespace { -std::float_t get_cfg_value_f(const DynamicConfig &cfg, - const std::string &key, - const std::float_t &def = 0.f) +float get_cfg_value_f(const DynamicConfig &cfg, + const std::string &key, + const float &def = 0.f) { if (cfg.has(key)) { if (auto opt = cfg.option(key)) @@ -282,10 +282,10 @@ void fill_header(anycubicsla_format_header &h, { CNumericLocalesSetter locales_setter; - std::float_t bottle_weight_g; - std::float_t bottle_volume_ml; - std::float_t bottle_cost; - std::float_t material_density; + float bottle_weight_g; + float bottle_volume_ml; + float bottle_cost; + float material_density; auto &cfg = print.full_print_config(); auto mat_opt = cfg.option("material_notes"); std::string mnotes = mat_opt? cfg.option("material_notes")->serialize() : ""; @@ -422,7 +422,7 @@ static void anycubicsla_write_int32(std::ofstream &out, std::uint32_t val) out.write((const char *) &i3, 1); out.write((const char *) &i4, 1); } -static void anycubicsla_write_float(std::ofstream &out, std::float_t val) +static void anycubicsla_write_float(std::ofstream &out, float val) { std::uint32_t *f = (std::uint32_t *) &val; anycubicsla_write_int32(out, *f);