diff --git a/CMakeLists.txt b/CMakeLists.txt
index 49fe3437f7..aa297b03b1 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -26,7 +26,6 @@ endif()
option(SLIC3R_STATIC "Compile PrusaSlicer with static libraries (Boost, TBB, glew)" ${SLIC3R_STATIC_INITIAL})
option(SLIC3R_GUI "Compile PrusaSlicer with GUI components (OpenGL, wxWidgets)" 1)
option(SLIC3R_FHS "Assume PrusaSlicer is to be installed in a FHS directory structure" 0)
-option(SLIC3R_WX_STABLE "Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on Linux" 0)
option(SLIC3R_PCH "Use precompiled headers" 1)
option(SLIC3R_MSVC_COMPILE_PARALLEL "Compile on Visual Studio in parallel" 1)
option(SLIC3R_MSVC_PDB "Generate PDB files on MSVC in Release mode" 1)
diff --git a/doc/Dependencies.md b/doc/Dependencies.md
index d8ced6318a..075f35b3a9 100644
--- a/doc/Dependencies.md
+++ b/doc/Dependencies.md
@@ -1,7 +1,7 @@
# Dependency report for PrusaSlicer
## Possible dynamic linking on Linux
* zlib: Strict dependency required from the system, linked dynamically. Many other libs depend on zlib.
-* wxWidgets: searches for wx-3.1 by default, but with cmake option `SLIC3R_WX_STABLE=ON` it will use wx-3.0 bundled with most distros.
+* wxWidgets >= 3.2
* libcurl
* tbb
* boost
diff --git a/doc/How to build - Linux et al.md b/doc/How to build - Linux et al.md
index 81e6310c4a..0f4a6f7790 100644
--- a/doc/How to build - Linux et al.md
+++ b/doc/How to build - Linux et al.md
@@ -87,7 +87,6 @@ And that's it. It is now possible to run the freshly built PrusaSlicer binary:
- `-DSLIC3R_ASAN=ON` enables gcc/clang address sanitizer (defaults to `OFF`, requires gcc>4.8 or clang>3.1)
- `-DSLIC3R_GTK=3` to use GTK3 (defaults to `2`). Note that wxWidgets must be built against the same GTK version.
- `-DSLIC3R_STATIC=ON` for static build (defaults to `OFF`)
-- `-DSLIC3R_WX_STABLE=ON` to look for wxWidgets 3.0 (defaults to `OFF`)
- `-DCMAKE_BUILD_TYPE=Debug` to build in debug mode (defaults to `Release`)
- `-DSLIC3R_GUI=no` to build the console variant of PrusaSlicer
@@ -101,13 +100,7 @@ As already mentioned above, dynamic linking of dependencies is possible, but Pru
The list of dependencies can be easily obtained by inspecting the CMake scripts in the `deps/` directory. Some of the dependencies don't have to be as recent as the versions listed - generally versions available on conservative Linux distros such as Debian stable, Ubuntu LTS releases or Fedora are likely sufficient. If you decide to build this way, it is your responsibility to make sure that CMake finds all required dependencies. It is possible to look at your distribution PrusaSlicer package to see how the package maintainers solved the dependency issues.
-#### wxWidgets
-By default, PrusaSlicer looks for wxWidgets 3.1. Our build script in fact downloads specific patched version of wxWidgets. If you want to link against wxWidgets 3.0 (which are still provided by most distributions because wxWidgets 3.1 have not yet been declared stable), you must set `-DSLIC3R_WX_STABLE=ON` when running CMake. Note that while PrusaSlicer can be linked against wWidgets 3.0, the combination is not well tested and there might be bugs in the resulting application.
-
-When building on ubuntu 20.04 focal fossa, the package libwxgtk3.0-gtk3-dev needs to be installed instead of libwxgtk3.0-dev and you should use:
-```
--DSLIC3R_WX_STABLE=1 -DSLIC3R_GTK=3
-```
+Note that you may need to use wxGTK with disabled EGL support for PrusaSlicer to work correctly: see [#9774](https://github.com/prusa3d/PrusaSlicer/issues/9774).
## Miscellaneous
diff --git a/resources/profiles/Sovol/SV01_BLTouch_thumbnail.png b/resources/profiles/Sovol/SV01_BLTouch_thumbnail.png
new file mode 100644
index 0000000000..035653cca3
Binary files /dev/null and b/resources/profiles/Sovol/SV01_BLTouch_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV01_texture.svg b/resources/profiles/Sovol/SV01_texture.svg
new file mode 100644
index 0000000000..506367c1ca
--- /dev/null
+++ b/resources/profiles/Sovol/SV01_texture.svg
@@ -0,0 +1,49 @@
+
+
+
diff --git a/resources/profiles/Sovol/SV02_BLTouch_thumbnail.png b/resources/profiles/Sovol/SV02_BLTouch_thumbnail.png
new file mode 100644
index 0000000000..8505529516
Binary files /dev/null and b/resources/profiles/Sovol/SV02_BLTouch_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV02_texture.svg b/resources/profiles/Sovol/SV02_texture.svg
new file mode 100644
index 0000000000..7dd6ea62f8
--- /dev/null
+++ b/resources/profiles/Sovol/SV02_texture.svg
@@ -0,0 +1 @@
+
\ No newline at end of file
diff --git a/resources/profiles/Sovol/SV03_BLTouch_thumbnail.png b/resources/profiles/Sovol/SV03_BLTouch_thumbnail.png
new file mode 100644
index 0000000000..f5c6409168
Binary files /dev/null and b/resources/profiles/Sovol/SV03_BLTouch_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV04 Copy Mode_thumbnail.png b/resources/profiles/Sovol/SV04 Copy Mode_thumbnail.png
new file mode 100644
index 0000000000..79d1fed3bf
Binary files /dev/null and b/resources/profiles/Sovol/SV04 Copy Mode_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV04 Dual Mode_thumbnail.png b/resources/profiles/Sovol/SV04 Dual Mode_thumbnail.png
new file mode 100644
index 0000000000..79d1fed3bf
Binary files /dev/null and b/resources/profiles/Sovol/SV04 Dual Mode_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV04 Mirror Mode_thumbnail.png b/resources/profiles/Sovol/SV04 Mirror Mode_thumbnail.png
new file mode 100644
index 0000000000..79d1fed3bf
Binary files /dev/null and b/resources/profiles/Sovol/SV04 Mirror Mode_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV04 Single Mode 01_thumbnail.png b/resources/profiles/Sovol/SV04 Single Mode 01_thumbnail.png
new file mode 100644
index 0000000000..79d1fed3bf
Binary files /dev/null and b/resources/profiles/Sovol/SV04 Single Mode 01_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV04 Single Mode 02_thumbnail.png b/resources/profiles/Sovol/SV04 Single Mode 02_thumbnail.png
new file mode 100644
index 0000000000..79d1fed3bf
Binary files /dev/null and b/resources/profiles/Sovol/SV04 Single Mode 02_thumbnail.png differ
diff --git a/resources/profiles/Sovol/SV05_texture.svg b/resources/profiles/Sovol/SV05_texture.svg
new file mode 100644
index 0000000000..b39b378465
--- /dev/null
+++ b/resources/profiles/Sovol/SV05_texture.svg
@@ -0,0 +1,50 @@
+
+
+
diff --git a/resources/profiles/Sovol/Sovol.ini b/resources/profiles/Sovol/Sovol.ini
new file mode 100644
index 0000000000..e8657703b0
--- /dev/null
+++ b/resources/profiles/Sovol/Sovol.ini
@@ -0,0 +1,4377 @@
+# Print profiles for the Sovol printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = SOVOL
+
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.0
+
+
+# Where to get the updates from?
+# config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Sovol/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:SV06]
+name = SV06
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV06_bed.stl
+bed_texture = SV06_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV01]
+name = SV01 / SV01 BLTOUCH
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV01_bed.stl
+bed_texture = SV01_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+
+[printer_model:SV01 PRO]
+name = SV01 PRO
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV01_bed.stl
+bed_texture = SV01PRO_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV02]
+name = SV02 / SV02 BLTOUCH
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV01_bed.stl
+bed_texture = SV02_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+
+[printer_model:SV03]
+name = SV03 / SV02 BLTOUCH
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV03_bed.stl
+bed_texture = SV03_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+
+; [printer_model:SV04]
+; name = SV04
+; variants = 0.4; 0.3; 0.6; 0.8
+; technology = FFF
+; family = SV
+; bed_model = SV04_bed.stl
+; bed_texture = SV04_texture.svg
+; default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV04 Copy Mode]
+name = SV04 Copy Mode
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV04
+; bed_model = SV04_bed.stl
+bed_texture = SV04_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV04 Dual Mode]
+name = SV04 Dual Mode
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV04
+; bed_model = SV04_bed.stl
+bed_texture = SV04_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+
+[printer_model:SV04 Mirror Mode]
+name = SV04 Mirror Mode
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV04
+; bed_model = SV04_bed.stl
+bed_texture = SV04_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV04 Single Mode 01]
+name = SV04 Single Mode 01
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV04
+; bed_model = SV04_bed.stl
+; bed_texture = SV04_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV04 Single Mode 02]
+name = SV04 Single Mode 02
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV04
+; bed_model = SV04_bed.stl
+bed_texture = SV04_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+
+[printer_model:SV05]
+name = SV05
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV05_bed.stl
+bed_texture = SV05_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+[printer_model:SV06 PLUS]
+name = SV06 PLUS
+variants = 0.4; 0.3; 0.6; 0.8
+technology = FFF
+family = SV
+bed_model = SV06PLUS_bed.stl
+bed_texture = SV06PLUS_texture.svg
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
+
+
+
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print presets
+
+[print:*common*]
+avoid_crossing_perimeters = 0
+thick_bridges = 0
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 25
+brim_width = 0
+brim_separation = 0.1
+clip_multipart_objects = 1
+compatible_printers =
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 800
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 10%
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes =
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 1
+output_filename_format = {input_filename_base}_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+post_process =
+print_settings_id =
+raft_layers = 0
+raft_first_layer_density = 90%
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirts = 1
+skirt_distance = 2
+skirt_height = 3
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -15
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 80%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+support_material_bottom_interface_layers = 0
+thin_walls = 0
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 40
+travel_speed = 180
+travel_speed_z = 12
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+gcode_label_objects = 1
+infill_anchor = 2.5
+infill_anchor_max = 12
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.4
+wall_distribution_count = 1
+min_bead_width = 85%
+enable_dynamic_overhang_speeds = 1
+top_fill_pattern = monotoniclines
+
+[print:*SV06*]
+fill_pattern = grid
+single_extruder_multi_material_priming = 0
+travel_speed = 180
+wipe_tower_x = 170
+wipe_tower_y = 125
+
+[print:*SV01*]
+fill_pattern = grid
+single_extruder_multi_material_priming = 0
+travel_speed = 120
+
+[print:*SV02*]
+fill_pattern = grid
+single_extruder_multi_material_priming = 0
+travel_speed = 120
+
+[print:*SV03*]
+fill_pattern = grid
+single_extruder_multi_material_priming = 0
+travel_speed = 120
+
+[print:*0.3nozzle*]
+elefant_foot_compensation = 0
+external_perimeter_extrusion_width = 0.3
+extrusion_width = 0.3
+first_layer_extrusion_width = 0.3
+infill_extrusion_width = 0.3
+perimeter_extrusion_width = 0.3
+solid_infill_extrusion_width = 0.3
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+support_material_xy_spacing = 150%
+support_material_contact_distance = 0.1
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
+thick_bridges = 0
+bridge_flow_ratio = 1
+bridge_speed = 20
+wipe_tower_bridging = 6
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.25
+wall_distribution_count = 1
+min_bead_width = 85%
+infill_overlap = 10%
+dynamic_overhang_speeds[0] = 20,20,15,15
+
+[print:*0.3nozzleSV06*]
+inherits = *0.3nozzle*
+perimeter_speed = 30
+external_perimeter_speed = 20
+small_perimeter_speed = 20
+infill_speed = 45
+solid_infill_speed = 45
+top_solid_infill_speed = 30
+support_material_speed = 40
+gap_fill_speed = 30
+perimeter_acceleration = 500
+infill_acceleration = 1000
+bridge_acceleration = 500
+first_layer_acceleration = 500
+default_acceleration = 1000
+max_print_speed = 80
+perimeters = 3
+fill_pattern = grid
+fill_density = 20%
+wipe_tower_bridging = 6
+
+
+[print:*0.6nozzle*]
+external_perimeter_extrusion_width = 0.61
+extrusion_width = 0.67
+first_layer_extrusion_width = 0.65
+infill_extrusion_width = 0.7
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+top_infill_extrusion_width = 0.6
+support_material_extrusion_width = 0.55
+support_material_contact_distance = 0.15
+support_material_xy_spacing = 80%
+support_material_interface_spacing = 0.3
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
+infill_anchor_max = 15
+top_solid_min_thickness = 0.9
+bottom_solid_min_thickness = 0.6
+thick_bridges = 1
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
+wall_distribution_count = 1
+min_bead_width = 85%
+infill_overlap = 15%
+
+[print:*0.6nozzleSV06*]
+inherits = *0.6nozzle*
+external_perimeter_extrusion_width = 0.65
+extrusion_width = 0.65
+infill_extrusion_width = 0.65
+thick_bridges = 0
+
+[print:*0.8nozzle*]
+external_perimeter_extrusion_width = 0.9
+extrusion_width = 0.9
+first_layer_extrusion_width = 0.9
+infill_extrusion_width = 0.9
+perimeter_extrusion_width = 0.9
+solid_infill_extrusion_width = 0.9
+top_infill_extrusion_width = 0.8
+support_material_extrusion_width = 0.7
+support_material_contact_distance = 0.25
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 100%
+support_material_spacing = 2
+support_material_xy_spacing = 80%
+support_material_threshold = 50
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
+fill_pattern = gyroid
+fill_density = 15%
+infill_anchor_max = 20
+top_solid_layers = 4
+bottom_solid_layers = 3
+skirt_distance = 3
+skirt_height = 2
+first_layer_height = 0.3
+infill_overlap = 15%
+bridge_speed = 22
+gap_fill_speed = 30
+bridge_flow_ratio = 0.9
+perimeter_acceleration = 800
+infill_acceleration = 1000
+bridge_acceleration = 1000
+first_layer_acceleration = 800
+default_acceleration = 1000
+top_solid_min_thickness = 1.2
+bottom_solid_min_thickness = 0.8
+single_extruder_multi_material_priming = 0
+thick_bridges = 1
+overhangs = 0
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.8
+wall_distribution_count = 1
+min_bead_width = 85%
+
+[print:*0.8nozzleSV06*]
+inherits = *0.8nozzle*
+external_perimeter_extrusion_width = 0.95
+extrusion_width = 0.85
+infill_extrusion_width = 0.85
+thick_bridges = 0
+
+[print:*soluble_support*]
+overhangs = 1
+skirts = 0
+support_material = 1
+support_material_contact_distance = 0
+support_material_extruder = 4
+support_material_extrusion_width = 0.45
+support_material_interface_extruder = 4
+support_material_interface_spacing = 0.1
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 1
+wipe_tower_bridging = 6
+support_material_interface_speed = 80%
+support_material_bottom_interface_layers = -1
+thick_bridges = 1
+
+[print:*0.05mm*]
+inherits = *common*
+layer_height = 0.05
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_flow_ratio = 0.6
+bridge_speed = 25
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 20%
+first_layer_acceleration = 800
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 30
+max_print_speed = 80
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_extrusion_width = 0.33
+support_material_spacing = 1.5
+support_material_contact_distance = 0.15
+raft_contact_distance = 0.15
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 30
+top_solid_infill_speed = 20
+top_solid_layers = 15
+thick_bridges = 1
+
+[print:*0.07mm*]
+inherits = *0.05mm*
+layer_height = 0.07
+bottom_solid_layers = 8
+bridge_flow_ratio = 0.6
+fill_density = 15%
+infill_speed = 40
+solid_infill_speed = 40
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 11
+
+[print:*0.15mm*]
+inherits = *common*
+bottom_solid_layers = 5
+external_perimeter_speed = 40
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.15
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 8
+bridge_flow_ratio = 1
+bridge_speed = 25
+
+[print:*0.20mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 40
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.2
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 6
+
+[print:*0.3mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 40
+perimeter_acceleration = 800
+layer_height = 0.25
+perimeter_speed = 50
+top_solid_layers = 4
+
+[print:*0.30mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 40
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.3
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 4
+support_material_contact_distance = 0.3
+
+[print:*0.35mm*]
+inherits = *common*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.35
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+
+[print:*0.40mm*]
+inherits = *common*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.65
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.4
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+top_solid_layers = 4
+
+## SV family ##
+
+
+## SV01 ##
+
+
+## SV01 - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV01]
+inherits = *0.05mm*; *SV01*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV01]
+inherits = *0.07mm*; *SV01*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV01]
+inherits = *0.10mm*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV01]
+inherits = *0.15mm*; *SV01*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV01]
+inherits = *0.15mm*; *SV01*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV01]
+inherits = *0.20mm*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV01]
+inherits = *0.20mm*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV01]
+inherits = *0.30mm*; *SV01*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV01 - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV01]
+inherits = *0.05mm*; *0.3nozzle*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV01]
+inherits = *0.07mm*; *0.3nozzle*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV01]
+inherits = *0.10mm*; *0.3nozzleSV01*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV01]
+inherits = *0.15mm*; *0.3nozzleSV01*; *SV01*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV01]
+inherits = 0.15mm QUALITY @0.3 nozzle SV01
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV01]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV01
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV01 - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV01]
+inherits = *0.15mm*; *0.6nozzleSV01*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV01]
+inherits = *0.20mm*; *0.6nozzleSV01*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV01]
+inherits = *0.30mm*; *0.6nozzleSV01*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV01]
+inherits = *0.35mm*; *0.6nozzleSV01*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV01]
+inherits = *0.40mm*; *0.6nozzleSV01*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV01 - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV01]
+inherits = *common*; *0.8nozzleSV01*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV01]
+inherits = *common*; *0.8nozzleSV01*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV01]
+inherits = *common*; *0.8nozzleSV01*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+## SV01 PRO ##
+
+
+## SV01 PRO - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV01 PRO]
+inherits = *0.05mm*; *SV01 PRO*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV01 PRO]
+inherits = *0.07mm*; *SV01 PRO*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV01 PRO]
+inherits = *0.10mm*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV01 PRO]
+inherits = *0.15mm*; *SV01 PRO*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV01 PRO]
+inherits = *0.15mm*; *SV01 PRO*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV01 PRO]
+inherits = *0.20mm*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV01 PRO]
+inherits = *0.20mm*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV01 PRO]
+inherits = *0.30mm*; *SV01 PRO*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV01 PRO - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV01 PRO]
+inherits = *0.05mm*; *0.3nozzle*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV01 PRO]
+inherits = *0.07mm*; *0.3nozzle*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV01 PRO]
+inherits = *0.10mm*; *0.3nozzleSV01 PRO*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV01 PRO]
+inherits = *0.15mm*; *0.3nozzleSV01 PRO*; *SV01 PRO*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV01 PRO]
+inherits = 0.15mm QUALITY @0.3 nozzle SV01 PRO
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV01 PRO]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV01 PRO
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV01 PRO - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV01 PRO]
+inherits = *0.15mm*; *0.6nozzleSV01 PRO*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV01 PRO]
+inherits = *0.20mm*; *0.6nozzleSV01 PRO*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV01 PRO]
+inherits = *0.30mm*; *0.6nozzleSV01 PRO*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV01 PRO]
+inherits = *0.35mm*; *0.6nozzleSV01 PRO*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV01 PRO]
+inherits = *0.40mm*; *0.6nozzleSV01 PRO*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV01 PRO - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV01 PRO]
+inherits = *common*; *0.8nozzleSV01 PRO*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV01 PRO]
+inherits = *common*; *0.8nozzleSV01 PRO*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV01 PRO]
+inherits = *common*; *0.8nozzleSV01 PRO*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV01 PRO.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+## SV02 ##
+
+
+## SV02 - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV02]
+inherits = *0.05mm*; *SV02*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV02]
+inherits = *0.07mm*; *SV02*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV02]
+inherits = *0.10mm*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV02]
+inherits = *0.15mm*; *SV02*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV02]
+inherits = *0.15mm*; *SV02*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV02]
+inherits = *0.20mm*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV02]
+inherits = *0.20mm*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV02]
+inherits = *0.30mm*; *SV02*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV02 - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV02]
+inherits = *0.05mm*; *0.3nozzle*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV02]
+inherits = *0.07mm*; *0.3nozzle*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV02]
+inherits = *0.10mm*; *0.3nozzleSV02*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV02]
+inherits = *0.15mm*; *0.3nozzleSV02*; *SV02*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV02]
+inherits = 0.15mm QUALITY @0.3 nozzle SV02
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV02]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV02
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV02 - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV02]
+inherits = *0.15mm*; *0.6nozzleSV02*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV02]
+inherits = *0.20mm*; *0.6nozzleSV02*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV02]
+inherits = *0.30mm*; *0.6nozzleSV02*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV02]
+inherits = *0.35mm*; *0.6nozzleSV02*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV02]
+inherits = *0.40mm*; *0.6nozzleSV02*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV02 - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV02]
+inherits = *common*; *0.8nozzleSV02*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV02]
+inherits = *common*; *0.8nozzleSV02*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV02]
+inherits = *common*; *0.8nozzleSV02*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV02.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+## SV03 ##
+
+
+## SV03 - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV03]
+inherits = *0.05mm*; *SV03*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV03]
+inherits = *0.07mm*; *SV03*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV03]
+inherits = *0.10mm*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV03]
+inherits = *0.15mm*; *SV03*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV03]
+inherits = *0.15mm*; *SV03*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV03]
+inherits = *0.20mm*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV03]
+inherits = *0.20mm*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV03]
+inherits = *0.30mm*; *SV03*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV03 - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV03]
+inherits = *0.05mm*; *0.3nozzle*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV03]
+inherits = *0.07mm*; *0.3nozzle*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV03]
+inherits = *0.10mm*; *0.3nozzleSV03*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV03]
+inherits = *0.15mm*; *0.3nozzleSV03*; *SV03*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV03]
+inherits = 0.15mm QUALITY @0.3 nozzle SV03
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV03]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV03
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV03 - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV03]
+inherits = *0.15mm*; *0.6nozzleSV03*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV03]
+inherits = *0.20mm*; *0.6nozzleSV03*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV03]
+inherits = *0.30mm*; *0.6nozzleSV03*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV03]
+inherits = *0.35mm*; *0.6nozzleSV03*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV03]
+inherits = *0.40mm*; *0.6nozzleSV03*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV03 - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV03]
+inherits = *common*; *0.8nozzleSV03*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV03]
+inherits = *common*; *0.8nozzleSV03*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV03]
+inherits = *common*; *0.8nozzleSV03*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV03.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+## SV04 ##
+
+
+## SV04 - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV04]
+inherits = *0.05mm*; *SV04*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV04]
+inherits = *0.07mm*; *SV04*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV04]
+inherits = *0.10mm*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV04]
+inherits = *0.15mm*; *SV04*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV04]
+inherits = *0.15mm*; *SV04*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV04]
+inherits = *0.20mm*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV04]
+inherits = *0.20mm*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV04]
+inherits = *0.30mm*; *SV04*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV04 - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV04]
+inherits = *0.05mm*; *0.3nozzle*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV04]
+inherits = *0.07mm*; *0.3nozzle*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV04]
+inherits = *0.10mm*; *0.3nozzleSV04*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV04]
+inherits = *0.15mm*; *0.3nozzleSV04*; *SV04*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV04]
+inherits = 0.15mm QUALITY @0.3 nozzle SV04
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV04]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV04
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV04 - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV04]
+inherits = *0.15mm*; *0.6nozzleSV04*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV04]
+inherits = *0.20mm*; *0.6nozzleSV04*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV04]
+inherits = *0.30mm*; *0.6nozzleSV04*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV04]
+inherits = *0.35mm*; *0.6nozzleSV04*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV04]
+inherits = *0.40mm*; *0.6nozzleSV04*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV04 - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV04]
+inherits = *common*; *0.8nozzleSV04*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV04]
+inherits = *common*; *0.8nozzleSV04*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV04]
+inherits = *common*; *0.8nozzleSV04*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV04.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+## SV05 ##
+
+
+## SV05 - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV05]
+inherits = *0.05mm*; *SV05*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV05]
+inherits = *0.07mm*; *SV05*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV05]
+inherits = *0.10mm*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV05]
+inherits = *0.15mm*; *SV05*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV05]
+inherits = *0.15mm*; *SV05*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV05]
+inherits = *0.20mm*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV05]
+inherits = *0.20mm*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV05]
+inherits = *0.30mm*; *SV05*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV05 - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV05]
+inherits = *0.05mm*; *0.3nozzle*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV05]
+inherits = *0.07mm*; *0.3nozzle*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV05]
+inherits = *0.10mm*; *0.3nozzleSV05*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV05]
+inherits = *0.15mm*; *0.3nozzleSV05*; *SV05*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV05]
+inherits = 0.15mm QUALITY @0.3 nozzle SV05
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV05]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV05
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV05 - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV05]
+inherits = *0.15mm*; *0.6nozzleSV05*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV05]
+inherits = *0.20mm*; *0.6nozzleSV05*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV05]
+inherits = *0.30mm*; *0.6nozzleSV05*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV05]
+inherits = *0.35mm*; *0.6nozzleSV05*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV05]
+inherits = *0.40mm*; *0.6nozzleSV05*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV05 - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV05]
+inherits = *common*; *0.8nozzleSV05*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV05]
+inherits = *common*; *0.8nozzleSV05*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV05]
+inherits = *common*; *0.8nozzleSV05*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV05.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+
+## SV06 ##
+
+
+## SV06 - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV06]
+inherits = *0.05mm*; *SV06*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV06]
+inherits = *0.07mm*; *SV06*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV06]
+inherits = *0.10mm*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV06]
+inherits = *0.15mm*; *SV06*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV06]
+inherits = *0.15mm*; *SV06*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV06]
+inherits = *0.20mm*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV06]
+inherits = *0.20mm*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV06]
+inherits = *0.30mm*; *SV06*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV06 - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV06]
+inherits = *0.05mm*; *0.3nozzle*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV06]
+inherits = *0.07mm*; *0.3nozzle*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV06]
+inherits = *0.10mm*; *0.3nozzleSV06*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV06]
+inherits = *0.15mm*; *0.3nozzleSV06*; *SV06*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV06]
+inherits = 0.15mm QUALITY @0.3 nozzle SV06
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV06]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV06
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV06 - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV06]
+inherits = *0.15mm*; *0.6nozzleSV06*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV06]
+inherits = *0.20mm*; *0.6nozzleSV06*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV06]
+inherits = *0.30mm*; *0.6nozzleSV06*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV06]
+inherits = *0.35mm*; *0.6nozzleSV06*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV06]
+inherits = *0.40mm*; *0.6nozzleSV06*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV06 - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV06]
+inherits = *common*; *0.8nozzleSV06*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV06]
+inherits = *common*; *0.8nozzleSV06*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV06]
+inherits = *common*; *0.8nozzleSV06*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+## SV06 PLUS ##
+
+
+## SV06 PLUS - 0.4mm nozzle
+
+[print:0.05mm ULTRADETAIL @SV06 PLUS]
+inherits = *0.05mm*; *SV06 PLUS*
+fill_pattern = gyroid
+fill_density = 15%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.07mm ULTRADETAIL @SV06 PLUS]
+inherits = *0.07mm*; *SV06 PLUS*
+fill_pattern = gyroid
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
+top_infill_extrusion_width = 0.4
+support_material_contact_distance = 0.1
+raft_contact_distance = 0.1
+
+[print:0.10mm DETAIL @SV06 PLUS]
+inherits = *0.10mm*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+bridge_acceleration = 800
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+perimeters = 3
+wipe_tower_bridging = 5
+
+[print:0.15mm QUALITY @SV06 PLUS]
+inherits = *0.15mm*; *SV06 PLUS*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.15mm SPEED @SV06 PLUS]
+inherits = *0.15mm*; *SV06 PLUS*
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.20mm QUALITY @SV06 PLUS]
+inherits = *0.20mm*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 80
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+fill_pattern = gyroid
+fill_density = 15%
+
+[print:0.20mm SPEED @SV06 PLUS]
+inherits = *0.20mm*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 60
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+
+[print:0.30mm DRAFT @SV06 PLUS]
+inherits = *0.30mm*; *SV06 PLUS*
+bottom_solid_layers = 3
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 85
+max_print_speed = 200
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+support_material_contact_distance = 0.2
+raft_contact_distance = 0.2
+
+
+## SV06 PLUS - 0.3mm nozzle
+
+[print:0.05mm ULTRADETAIL @0.3 nozzle SV06 PLUS]
+inherits = *0.05mm*; *0.3nozzle*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.3 and num_extruders==1
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.07mm ULTRADETAIL @0.3 nozzle SV06 PLUS]
+inherits = *0.07mm*; *0.3nozzle*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.3
+infill_speed = 30
+solid_infill_speed = 30
+support_material_speed = 30
+top_solid_infill_speed = 20
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.10mm DETAIL @0.3 nozzle SV06 PLUS]
+inherits = *0.10mm*; *0.3nozzleSV06 PLUS*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.07
+raft_contact_distance = 0.07
+
+[print:0.15mm QUALITY @0.3 nozzle SV06 PLUS]
+inherits = *0.15mm*; *0.3nozzleSV06 PLUS*; *SV06 PLUS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.3
+fill_pattern = grid
+fill_density = 20%
+support_material_contact_distance = 0.08
+raft_contact_distance = 0.07
+perimeter_extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.27
+infill_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+
+[print:0.15mm SOLUBLE FULL @0.3 nozzle SV06 PLUS]
+inherits = 0.15mm QUALITY @0.3 nozzle SV06 PLUS
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.3 and num_extruders>1
+support_material_contact_distance = 0
+raft_contact_distance = 0
+wipe_tower_bridging = 5
+solid_infill_speed = 40
+support_material_extruder = 5
+support_material_interface_extruder = 5
+support_material_with_sheath = 1
+support_material_interface_layers = 4
+support_material_threshold = 60
+support_material = 1
+support_material_synchronize_layers = 1
+support_material_xy_spacing = 100%
+support_material_style = snug
+raft_first_layer_expansion = 2
+support_material_interface_spacing = 0.05
+
+[print:0.15mm SOLUBLE INTERFACE @0.3 nozzle SV06 PLUS]
+inherits = 0.15mm SOLUBLE FULL @0.3 nozzle SV06 PLUS
+support_material_extruder = 0
+support_material_interface_extruder = 5
+support_material_with_sheath = 0
+support_material_style = grid
+
+## SV06 PLUS - 0.6mm nozzle
+
+[print:0.15mm DETAIL @0.6 nozzle SV06 PLUS]
+inherits = *0.15mm*; *0.6nozzleSV06 PLUS*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.20mm DETAIL @0.6 nozzle SV06 PLUS]
+inherits = *0.20mm*; *0.6nozzleSV06 PLUS*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.22
+raft_contact_distance = 0.2
+bridge_flow_ratio = 1
+
+[print:0.30mm QUALITY @0.6 nozzle SV06 PLUS]
+inherits = *0.30mm*; *0.6nozzleSV06 PLUS*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 1
+
+[print:0.35mm SPEED @0.6 nozzle SV06 PLUS]
+inherits = *0.35mm*; *0.6nozzleSV06 PLUS*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+[print:0.40mm DRAFT @0.6 nozzle SV06 PLUS]
+inherits = *0.40mm*; *0.6nozzleSV06 PLUS*;
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_acceleration = 1000
+infill_speed = 70
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 70
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance = 0.25
+raft_contact_distance = 0.25
+bridge_flow_ratio = 0.95
+
+## SV06 PLUS - 0.8mm nozzle
+
+## Only Single mode at the moment
+
+[print:0.30mm DETAIL @0.8 nozzle SV06 PLUS]
+inherits = *common*; *0.8nozzleSV06 PLUS*
+layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 80
+solid_infill_speed = 50
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.40mm QUALITY @0.8 nozzle SV06 PLUS]
+inherits = *common*; *0.8nozzleSV06 PLUS*
+layer_height = 0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 35
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 45
+top_solid_infill_speed = 35
+support_material_speed = 40
+
+[print:0.55mm DRAFT @0.8 nozzle SV06 PLUS]
+inherits = *common*; *0.8nozzleSV06 PLUS*
+layer_height = 0.55
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06 PLUS.*/ and nozzle_diameter[0]==0.8
+perimeter_speed = 30
+external_perimeter_speed = 25
+infill_acceleration = 1000
+infill_speed = 50
+max_print_speed = 50
+solid_infill_speed = 40
+support_material_speed = 35
+support_material_contact_distance = 0.25
+top_solid_infill_speed = 30
+external_perimeter_extrusion_width = 1
+perimeter_extrusion_width = 1
+
+
+# XXXXXXxxXXXXXXXXXXXXXX
+# XXX--- filament ---XXX
+# XXXXXXXXxxXXXXXXXXXXXX
+
+[filament:*common*]
+cooling = 1
+compatible_printers =
+extrusion_multiplier = 1
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_toolchange_delay = 0
+filament_cooling_moves = 4
+filament_cooling_initial_speed = 2.2
+filament_cooling_final_speed = 3.4
+filament_load_time = 0
+filament_unload_time = 0
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_minimal_purge_on_wipe_tower = 15
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 15
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+full_fan_speed_layer = 4
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF8000
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 210
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 90
+bridge_fan_speed = 50
+disable_fan_first_layers = 3
+full_fan_speed_layer = 5
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PETG
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+temperature = 240
+filament_retract_length = 1
+filament_retract_lift = 0.2
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+bridge_fan_speed = 25
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FFF2EC
+filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 20
+temperature = 255
+
+[filament:*ABSC*]
+inherits = *common*
+bed_temperature = 100
+bridge_fan_speed = 25
+cooling = 1
+disable_fan_first_layers = 4
+fan_always_on = 0
+fan_below_layer_time = 30
+slowdown_below_layer_time = 20
+filament_colour = #FFF2EC
+filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 15
+min_fan_speed = 15
+min_print_speed = 15
+temperature = 255
+
+[filament:*FLEX*]
+inherits = *common*
+bed_temperature = 50
+bridge_fan_speed = 80
+compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_SOVOL.*/ and printer_notes=~/.*PRINTER_MODEL_SV06.*/ and single_extruder_multi_material)
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.15
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_max_volumetric_speed = 1.5
+filament_type = FLEX
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+max_fan_speed = 90
+min_fan_speed = 70
+temperature = 240
+filament_retract_length = 0.8
+filament_deretract_speed = 25
+filament_retract_lift = 0
+filament_wipe = 0
+
+[filament:Prusament ASA @SOVOL]
+inherits = *ABS*
+filament_vendor = Prusa Polymers
+filament_cost = 42.69
+filament_density = 1.07
+filament_spool_weight = 201
+fan_always_on = 1
+first_layer_temperature = 260
+first_layer_bed_temperature = 100
+temperature = 260
+bed_temperature = 100
+cooling = 1
+min_fan_speed = 20
+max_fan_speed = 20
+bridge_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 15
+disable_fan_first_layers = 4
+filament_type = ASA
+filament_colour = #FFF2EC
+
+[filament:Prusament PC Blend @SOVOL]
+inherits = *ABS*
+filament_vendor = Prusa Polymers
+filament_cost = 62.36
+filament_density = 1.22
+filament_spool_weight = 201
+fan_always_on = 0
+first_layer_temperature = 275
+first_layer_bed_temperature = 95
+temperature = 275
+bed_temperature = 100
+cooling = 1
+min_fan_speed = 20
+max_fan_speed = 20
+bridge_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 30
+filament_type = PC
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 8
+filament_retract_lift = 0.2
+
+[filament:Prusament PC Blend Carbon Fiber @SOVOL]
+inherits = Prusament PC Blend
+filament_cost = 90.73
+filament_density = 1.16
+extrusion_multiplier = 1.04
+first_layer_temperature = 285
+temperature = 285
+disable_fan_first_layers = 4
+fan_below_layer_time = 10
+filament_colour = #BBBBBB
+filament_retract_length = nil
+filament_retract_lift = nil
+
+[filament:Prusament PA11 Carbon Fiber @SOVOL]
+inherits = Prusament PC Blend Carbon Fiber
+filament_cost = 151.24
+filament_density = 1.11
+filament_type = PA
+filament_max_volumetric_speed = 6.5
+extrusion_multiplier = 1.05
+first_layer_temperature = 275
+temperature = 285
+first_layer_bed_temperature = 90
+bed_temperature = 100
+fan_below_layer_time = 10
+
+
+[filament:Generic ABS @SOVOL]
+inherits = *ABSC*
+filament_vendor = Generic
+filament_cost = 27.82
+filament_density = 1.04
+
+[filament:Generic PETG @SOVOL]
+inherits = *PET*
+renamed_from = "Generic PET"
+filament_vendor = Generic
+filament_cost = 27.82
+filament_density = 1.27
+
+[filament:Generic FLEX @SOVOL]
+inherits = *FLEX*
+filament_vendor = Generic
+filament_cost = 82
+filament_density = 1.22
+filament_max_volumetric_speed = 1.2
+filament_retract_length = 0
+filament_retract_speed = nil
+filament_retract_lift = nil
+
+[filament:Generic HIPS @SOVOL]
+inherits = *ABS*
+filament_vendor = Generic
+filament_cost = 27.3
+filament_density = 1.04
+bridge_fan_speed = 50
+cooling = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FFFFD7
+filament_soluble = 1
+filament_type = HIPS
+first_layer_temperature = 230
+max_fan_speed = 20
+min_fan_speed = 20
+temperature = 230
+
+
+## Filaments 0.8 nozzle
+
+[filament:Generic PLA 0.8 @SOVOL]
+inherits = Generic PLA
+first_layer_temperature = 220
+temperature = 220
+filament_max_volumetric_speed = 15
+slowdown_below_layer_time = 20
+
+
+[filament:Generic ABS 0.8 @SOVOL]
+inherits = Generic ABS
+first_layer_temperature = 265
+temperature = 265
+filament_max_volumetric_speed = 15
+
+[filament:Generic PETG 0.8 @SOVOL]
+inherits = Generic PETG
+first_layer_temperature = 240
+temperature = 250
+filament_max_volumetric_speed = 20
+filament_retract_lift = 0.2
+slowdown_below_layer_time = 20
+
+[printer:*common*]
+printer_technology = FFF
+bed_shape = 0x0,220x0,220x220,0x220
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+between_objects_gcode =
+deretract_speed = 0
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+extruder_offset = 0x0
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 1
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 2000
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+machine_limits_usage = emit_to_gcode
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+max_print_height = 250
+nozzle_diameter = 0.4
+octoprint_apikey =
+octoprint_host =
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV06\n
+printer_settings_id =
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_length_toolchange = 4
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+serial_port =
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+toolchange_gcode =
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+printer_model =
+printer_variant = 0.4
+default_print_profile = 0.20mm QUALITY
+default_filament_profile = Prusament PLA
+color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
+
+
+[printer:*multimaterial*]
+inherits = *common*
+deretract_speed = 50
+retract_before_travel = 3
+retract_before_wipe = 60%
+retract_layer_change = 0
+retract_length = 4
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 80
+parking_pos_retraction = 92
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+single_extruder_multi_material = 1
+variable_layer_height = 1
+printer_model = SV02
+
+
+# XXXXXXXXXXXXXXXXXX
+# XXX--- SV01 ---XXX
+# XXXXXXXXXXXXXXXXXX
+
+[printer:SV01]
+inherits = *common*
+bed_shape = 0x0,280x0,280x240,0x240
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+deretract_speed = 0
+end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n
+extra_loading_move = -2
+extruder_colour = #0080FF
+gcode_flavor = marlin2
+high_current_on_filament_swap = 0
+machine_max_acceleration_e = 1000,5000
+machine_max_acceleration_extruding = 500,1250
+machine_max_acceleration_retracting = 500,1250
+machine_max_acceleration_x = 500,1000
+machine_max_acceleration_y = 500,1000
+machine_max_acceleration_z = 100,200
+machine_max_feedrate_e = 25,120
+machine_max_feedrate_x = 300,200
+machine_max_feedrate_y = 300,200
+machine_max_feedrate_z = 5,12
+machine_max_jerk_e = 5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.32
+max_print_height = 300
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+printer_settings_id =
+printer_technology = FFF
+remaining_times = 0
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV01\n
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+silent_mode = 0
+start_gcode = G28 ; home all\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; \nG1 X5.1 Y10 Z0.3 F5000.0 ; Move to start position\nG1 X5.1 Y200 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5.4 Y200 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y10 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+use_relative_e_distances = 0
+printer_model = SV01
+default_print_profile = 0.20mm SPEED @SV01
+thumbnails = 160x120
+
+
+[printer:SV01 0.3 nozzle]
+inherits = SV01
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV01
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV01 0.6 nozzle]
+inherits = SV01
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV01
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV01 0.8 nozzle]
+inherits = SV01
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+
+# XXXXXXXXXXXXXXXXXXXXX
+# XXX--- SV01 PRO---XXX
+# XXXXXXXXXXXXXXXXXXXXX
+
+[printer:SV01 PRO]
+inherits = *common*
+bed_shape = 0x0,280x0,280x240,0x240
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+deretract_speed = 0
+end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n
+extra_loading_move = -2
+extruder_colour = #0080FF
+gcode_flavor = marlin2
+high_current_on_filament_swap = 0
+machine_max_acceleration_e = 1000,5000
+machine_max_acceleration_extruding = 500,1250
+machine_max_acceleration_retracting = 500,1250
+machine_max_acceleration_x = 500,1000
+machine_max_acceleration_y = 500,1000
+machine_max_acceleration_z = 100,200
+machine_max_feedrate_e = 25,120
+machine_max_feedrate_x = 300,200
+machine_max_feedrate_y = 300,200
+machine_max_feedrate_z = 5,12
+machine_max_jerk_e = 5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.32
+max_print_height = 300
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+printer_settings_id =
+printer_technology = FFF
+remaining_times = 0
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV01 PRO\n
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+silent_mode = 0
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+use_relative_e_distances = 0
+printer_model = SV01 PRO
+default_print_profile = 0.20mm SPEED @SV01 PRO
+thumbnails = 160x120
+
+
+[printer:SV01 PRO 0.3 nozzle]
+inherits = SV01 PRO
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV01 PRO
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV01 PRO 0.6 nozzle]
+inherits = SV01 PRO
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV01 PRO
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV01 PRO 0.8 nozzle]
+inherits = SV01 PRO
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV02 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV02]
+inherits = *common*
+bed_shape = 0x0,280x0,280x240,0x240
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+gcode_flavor = marlin2
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+silent_mode = 1
+remaining_times = 1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV02\n
+retract_lift_below = 209
+max_print_height = 300
+single_extruder_multi_material = 1
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV02
+default_print_profile = 0.20mm SPEED @SV02
+thumbnails = 160x120
+
+
+[printer:SV02 0.3 nozzle]
+inherits = SV02
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV02
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV02 0.6 nozzle]
+inherits = SV02
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV02
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV02 0.8 nozzle]
+inherits = SV02
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV03 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV03]
+inherits = *common*
+bed_shape = 0x0,350x0,350x350,0x350
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+silent_mode = 1
+remaining_times = 1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV03\n
+retract_lift_below = 209
+max_print_height = 400
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV03
+default_print_profile = 0.20mm SPEED @SV03
+thumbnails = 160x120
+
+
+[printer:SV03 0.3 nozzle]
+inherits = SV03
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV03
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV03 0.6 nozzle]
+inherits = SV03
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV03
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV03 0.8 nozzle]
+inherits = SV03
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV04 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV04]
+inherits = *common*
+bed_shape = 0x0,302x0,302x302,0x302
+deretract_speed = 0
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+extra_loading_move = -2
+extruder_colour = ;
+extruder_offset = 0x0
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 1250
+machine_max_acceleration_retracting = 1250
+machine_max_acceleration_x = 1000
+machine_max_acceleration_y = 1000
+machine_max_acceleration_z = 200
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 200
+machine_max_feedrate_y = 200
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 4.5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.25
+max_print_height = 402
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV04\n
+remaining_times = 1
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_length_toolchange = 4
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 1
+single_extruder_multi_material = 0
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV04
+default_print_profile = 0.20mm SPEED @SV04
+filament = Prusament PLA @Template
+filament_1 = Prusament PLA @Template
+thumbnails = 160x120
+
+[printer:SV04 0.3 nozzle]
+inherits = SV04
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV04
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV04 0.6 nozzle]
+inherits = SV04
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV04
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV04 0.8 nozzle]
+inherits = SV04
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV04 Copy Mode ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV04 Copy Mode]
+inherits = SV04
+bed_shape = 0x0,150x0,150x302,0x302
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV04 Copy Mode
+default_print_profile = 0.20mm SPEED @SV04 Copy Mode
+filament = Prusament PLA @Template
+filament_1 = Prusament PLA @Template
+thumbnails = 160x120
+
+[printer:SV04 Copy Mode 0.3 nozzle]
+inherits = SV04 Copy Mode
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV04 Copy Mode
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV04 Copy Mode 0.6 nozzle]
+inherits = SV04 Copy Mode
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV04 Copy Mode
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV04 Copy Mode 0.8 nozzle]
+inherits = SV04 Copy Mode
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle SV04 Copy Mode
+default_filament_profile = Prusament PLA @0.8 nozzle SV04 Copy Mode
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV04 Dual Mode ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV04 Dual Mode]
+inherits = SV04
+truder_offset = 0x0,0x0
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.25,0.25
+max_print_height = 402
+min_layer_height = 0.07,0.07
+nozzle_diameter = 0.4,0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV04\n
+remaining_times = 1
+retract_before_travel = 2,2
+retract_before_wipe = 0%,0%
+retract_layer_change = 1,1
+retract_length = 0.5,0.5
+retract_length_toolchange = 4,4
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 209,209
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 40,40
+silent_mode = 1
+single_extruder_multi_material = 0
+deretract_speed = 0,0
+ooze_prevention = 1
+standby_temperature_delta = -15
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV04 Dual Mode
+default_print_profile = 0.20mm SPEED @SV04 Dual Mode
+filament = Prusament PLA @Template
+filament_1 = Prusament PLA @Template
+thumbnails = 160x120
+
+[printer:SV04 Dual Mode 0.3 nozzle]
+inherits = SV04 Dual Mode
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV04 Dual Mode
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV04 Dual Mode 0.6 nozzle]
+inherits = SV04 Dual Mode
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV04 Dual Mode
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV04 Dual Mode 0.8 nozzle]
+inherits = SV04 Dual Mode
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle SV04 Dual Mode
+default_filament_profile = Prusament PLA @0.8 nozzle SV04 Dual Mode
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV04 Mirror Mode ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV04 Mirror Mode]
+inherits = SV04
+bed_shape = 0x0,115x0,115x302,0x302
+deretract_speed = 0
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV04 Mirror Mode
+default_print_profile = 0.20mm SPEED @SV04 Mirror Mode
+filament = Prusament PLA @Template
+filament_1 = Prusament PLA @Template
+thumbnails = 160x120
+
+[printer:SV04 Mirror Mode 0.3 nozzle]
+inherits = SV04 Mirror Mode
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV04 Mirror Mode
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV04 Mirror Mode 0.6 nozzle]
+inherits = SV04 Mirror Mode
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV04 Mirror Mode
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV04 Mirror Mode 0.8 nozzle]
+inherits = SV04 Mirror Mode
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle SV04 Mirror Mode
+default_filament_profile = Prusament PLA @0.8 nozzle SV04 Mirror Mode
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV04 Single Mode 01 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV04 Single Mode 01]
+inherits = SV04
+deretract_speed = 0
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+start_gcode = M104 T0 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 T0 S[first_layer_temperature] ; wait for extruder temp\nG28;\nM420 S1;\nT0;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV04 Single Mode 01
+default_print_profile = 0.20mm SPEED @SV04 Single Mode 01
+filament = Prusament PLA @Template
+filament_1 = Prusament PLA @Template
+thumbnails = 160x120
+
+[printer:SV04 Single Mode 01 0.3 nozzle]
+inherits = SV04 Single Mode 01
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+; start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV04 Single Mode 01
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV04 Single Mode 01 0.6 nozzle]
+inherits = SV04 Single Mode 01
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+; start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV04 Single Mode 01
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV04 Single Mode 01 0.8 nozzle]
+inherits = SV04 Single Mode 01
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+; start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle SV04 Single Mode 01
+default_filament_profile = Prusament PLA @0.8 nozzle SV04 Single Mode 01
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV04 Single Mode 02 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV04 Single Mode 02]
+inherits = SV04
+deretract_speed = 0
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+start_gcode = M104 T1 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 T1 S[first_layer_temperature] ; wait for extruder temp\nG28;\nM420 S1;\nT1;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV04 Single Mode 02
+default_print_profile = 0.20mm SPEED @SV04 Single Mode 02
+filament = Prusament PLA @Template
+filament_1 = Prusament PLA @Template
+thumbnails = 160x120
+
+[printer:SV04 Single Mode 02 0.3 nozzle]
+inherits = SV04 Single Mode 02
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+; start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV04 Single Mode 02
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV04 Single Mode 02 0.6 nozzle]
+inherits = SV04 Single Mode 02
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+; start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV04 Single Mode 02
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV04 Single Mode 02 0.8 nozzle]
+inherits = SV04 Single Mode 02
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+; start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle SV04 Single Mode 02
+default_filament_profile = Prusament PLA @0.8 nozzle SV04 Single Mode 02
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV05 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV05]
+inherits = *common*
+bed_shape = 0x0,220x0,220x220,0x220
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+silent_mode = 1
+remaining_times = 1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV05\n
+retract_lift_below = 209
+max_print_height = 300
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV05
+default_print_profile = 0.20mm SPEED @SV05
+thumbnails = 160x120
+
+
+[printer:SV05 0.3 nozzle]
+inherits = SV05
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV05
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV05 0.6 nozzle]
+inherits = SV05
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV05
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV05 0.8 nozzle]
+inherits = SV05
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.25
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXX
+# XXX--- SV06 ---XXX
+# XXXXXXXXXXXXXXXXX
+
+[printer:SV06]
+inherits = *common*
+bed_shape = 0x0,220x0,220x220,0x220
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+silent_mode = 1
+remaining_times = 1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV06\n
+retract_lift_below = 209
+max_print_height = 250
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV06
+default_print_profile = 0.20mm SPEED @SV06
+thumbnails = 160x120
+
+
+[printer:SV06 0.3 nozzle]
+inherits = SV06
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV06
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV06 0.6 nozzle]
+inherits = SV06
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+deretract_speed = 28
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV06
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV06 0.8 nozzle]
+inherits = SV06
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.3
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+
+# XXXXXXXXXXXXXXXXXXXXXXX
+# XXX--- SV06 PLUS ---XXX
+# XXXXXXXXXXXXXXXXXXXXXXX
+
+[printer:SV06 PLUS]
+inherits = *common*
+bed_shape = 0x0,300x0,300x300,0x300
+end_gcode = G91 ;Relative positioning\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X10 Y220 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+retract_before_travel = 0.5
+silent_mode = 1
+remaining_times = 1
+retract_length = 0.5
+retract_speed = 30
+deretract_speed = 30
+retract_lift = 0
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV06 PLUS\n
+retract_lift_below = 209
+max_print_height = 340
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+printer_model = SV06 PLUS
+default_print_profile = 0.20mm SPEED @SV06 PLUS
+thumbnails = 160x120
+
+
+[printer:SV06 PLUS 0.3 nozzle]
+inherits = SV06 PLUS
+nozzle_diameter = 0.3
+max_layer_height = 0.15
+min_layer_height = 0.05
+printer_variant = 0.3
+retract_lift = 0.15
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.10mm DETAIL @0.3 nozzle SV06 PLUS
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
+
+[printer:SV06 PLUS 0.6 nozzle]
+inherits = SV06 PLUS
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+printer_variant = 0.6
+retract_length = 0.5
+retract_speed = 30
+deretract_speed = 30
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.30mm QUALITY @0.6 nozzle SV06 PLUS
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
+
+[printer:SV06 PLUS 0.8 nozzle]
+inherits = SV06 PLUS
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.2
+printer_variant = 0.8
+retract_length = 0.7
+retract_speed = 40
+deretract_speed = 23
+retract_lift = 0.3
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
+default_print_profile = 0.40mm QUALITY @0.8 nozzle
+default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+
+# XXXXXXXXXXXXXXXXXXXXX
+# XXX--- BLTOUCH ---XXX
+# XXXXXXXXXXXXXXXXXXXXX
+
+
+[printer:SV01_BLTouch]
+inherits = SV01
+end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n//M85 S0 ; For use with raspberry.\n
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+
+[printer:SV02_BLTouch]
+inherits = SV02
+end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n//M85 S0 ; For use with raspberry.\n
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
+
+[printer:SV03_BLTouch]
+inherits = SV03
+end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n//M85 S0 ; For use with raspberry.\n
+start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
\ No newline at end of file
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 9a037e44fd..3cb33b36df 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -50,23 +50,17 @@ if (SLIC3R_GUI)
if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
set (wxWidgets_CONFIG_OPTIONS "--toolkit=gtk${SLIC3R_GTK}")
- if (SLIC3R_WX_STABLE)
- find_package(wxWidgets 3.0 REQUIRED COMPONENTS base core adv html gl)
- else ()
- find_package(wxWidgets 3.1 QUIET COMPONENTS base core adv html gl)
-
- if (NOT wxWidgets_FOUND)
- message(FATAL_ERROR "\nCould not find wxWidgets 3.1.\n"
- "Hint: On Linux you can set -DSLIC3R_WX_STABLE=1 to use wxWidgets 3.0\n")
- endif ()
+ find_package(wxWidgets 3.2 QUIET COMPONENTS base core adv html gl)
+ if (NOT wxWidgets_FOUND)
+ message(FATAL_ERROR "Could not find wxWidgets >= 3.2")
endif ()
include(${wxWidgets_USE_FILE})
else ()
- find_package(wxWidgets 3.1 COMPONENTS html adv gl core base)
+ find_package(wxWidgets 3.2 COMPONENTS html adv gl core base)
if (NOT wxWidgets_FOUND)
message(STATUS "Trying to find wxWidgets in CONFIG mode...")
- find_package(wxWidgets 3.2 CONFIG REQUIRED COMPONENTS html adv gl core base)
+ find_package(wxWidgets 3.1.6 CONFIG REQUIRED COMPONENTS html adv gl core base)
slic3r_remap_configs(wx::wxhtml wx::wxadv wx::wxgl wx::wxcore wx::wxbase RelWithDebInfo Release)
else ()
include(${wxWidgets_USE_FILE})