Sync with PrusaSlicer-settings.

resources/profiles/PrusaResearch.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.4.0-rc
+1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
 1.4.3 Added new filament profiles and SLA materials.
 1.4.2 Added SLA material profiles.
 1.4.1 Updated firmware version.

resources/profiles/PrusaResearch.ini

@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.4.3
+config_version = 1.4.4
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -2050,7 +2050,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2S
 inherits = Fillamentum ASA
 filament_vendor = Extrudr
 bed_temperature = 90
-filament_cost = 25.98
+filament_cost = 34.64
 filament_density = 1.05
 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120"
 first_layer_bed_temperature = 90
@@ -2083,8 +2083,8 @@ filament_vendor = Extrudr
 
 [filament:Extrudr XPETG CF]
 inherits = Extrudr PETG
-filament_cost = 49.99
+filament_cost = 62.49
-filament_density = 1.41
+filament_density = 1.29
 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198"
 first_layer_temperature = 235
 temperature = 235
@@ -2125,7 +2125,7 @@ filament_spool_weight = 230
 [filament:Extrudr Flax]
 inherits = *PLA*
 filament_vendor = Extrudr
-filament_cost = 56.23
+filament_cost = 50.91
 filament_density = 1.45
 filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
 first_layer_temperature = 190
@@ -2140,13 +2140,13 @@ filament_spool_weight = 262
 [filament:Extrudr GreenTEC]
 inherits = *PLA*
 filament_vendor = Extrudr
-filament_cost = 56
+filament_cost = 50.91
 filament_density = 1.3
-filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=106"
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?ignorechildren=1&material=106"
 first_layer_temperature = 208
 temperature = 208
 slowdown_below_layer_time = 20
-filament_spool_weight = 230
+filament_spool_weight = 262
 
 [filament:Extrudr GreenTEC Pro]
 inherits = *PLA*
@@ -2164,7 +2164,7 @@ filament_spool_weight = 230
 [filament:Extrudr GreenTEC Pro Carbon]
 inherits = *PLA*
 filament_vendor = Extrudr
-filament_cost = 56.23
+filament_cost = 62.49
 filament_density = 1.2
 filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
 first_layer_temperature = 225
@@ -2221,8 +2221,8 @@ extrusion_multiplier = 1.2
 filament_cost = 39.98
 filament_density = 1.19
 filament_deretract_speed = nil
-filament_max_volumetric_speed = 2
+filament_max_volumetric_speed = 3
-filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=117"
 filament_retract_length = 0.4
 filament_wipe = nil
 filament_spool_weight = 230
@@ -2236,8 +2236,8 @@ extrusion_multiplier = 1.2
 filament_cost = 39.98
 filament_density = 1.18
 filament_deretract_speed = nil
-filament_max_volumetric_speed = 1.2
+filament_max_volumetric_speed = 1.8
-filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=116"
 filament_retract_length = 0.4
 filament_wipe = nil
 filament_spool_weight = 230
@@ -3511,13 +3511,6 @@ filament_density = 1.27
 filament_spool_weight = 235
 compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
-[filament:Fiberlogy PETG]
-inherits = *PET*
-filament_vendor = Fiberlogy
-filament_cost = 21.50
-filament_density = 1.27
-compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
-
 [filament:Prusament PETG]
 inherits = *PET*
 filament_vendor = Prusa Polymers
@@ -3580,8 +3573,9 @@ filament_density = 1.27
 filament_spool_weight = 235
 filament_type = PETG
 
-[filament:Fiberlogy PETG @0.6 nozzle]
+[filament:Fiberlogy Easy PET-G @0.6 nozzle]
 inherits = *PET06*
+renamed_from = Fiberlogy PETG @0.6 nozzle
 filament_vendor = Fiberlogy
 first_layer_temperature = 230
 temperature = 240
@@ -3673,11 +3667,297 @@ filament_density = 1.24
 filament_spool_weight = 230
 compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
-[filament:Fiberlogy PLA]
+[filament:Fiberlogy Easy PLA]
 inherits = *PLA*
+renamed_from = Fiberlogy PLA
 filament_vendor = Fiberlogy
-filament_cost = 25.4
+filament_cost = 20
 filament_density = 1.24
+first_layer_temperature = 220
+temperature = 220
+filament_spool_weight = 330
+
+[filament:Fiberlogy Easy PET-G]
+inherits = *PET*
+renamed_from = Fiberlogy PETG
+filament_vendor = Fiberlogy
+filament_spool_weight = 330
+filament_cost = 20
+filament_density = 1.27
+compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+first_layer_bed_temperature = 80
+bed_temperature = 80
+first_layer_temperature = 235
+temperature = 235
+min_fan_speed = 15
+max_fan_speed = 30
+bridge_fan_speed = 60
+disable_fan_first_layers = 5
+full_fan_speed_layer = 5
+slowdown_below_layer_time = 15
+
+[filament:Fiberlogy ASA]
+inherits = *ABS*
+filament_vendor = Fiberlogy
+filament_cost = 33
+filament_density = 1.07
+filament_spool_weight = 330
+fan_always_on = 0
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 15
+bridge_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 260
+temperature = 260
+first_layer_bed_temperature = 105
+bed_temperature = 110
+filament_type = ASA
+fan_below_layer_time = 30
+disable_fan_first_layers = 5
+
+[filament:Fiberlogy ASA @MINI]
+inherits = Fiberlogy ASA; *ABSMINI*
+
+[filament:Fiberlogy Easy ABS]
+inherits = Fiberlogy ASA
+filament_cost = 22.67
+filament_density = 1.09
+fan_always_on = 0
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 15
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 250
+temperature = 250
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_type = ABS
+fan_below_layer_time = 25
+disable_fan_first_layers = 5
+
+[filament:Fiberlogy Easy ABS @MINI]
+inherits = Fiberlogy Easy ABS; *ABSMINI*
+
+[filament:Fiberlogy CPE HT]
+inherits = *PET*
+filament_vendor = Fiberlogy
+filament_cost = 42.67
+filament_density = 1.18
+extrusion_multiplier = 0.98
+filament_spool_weight = 330
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 50
+min_print_speed = 15
+first_layer_temperature = 275
+temperature = 275
+first_layer_bed_temperature = 105
+bed_temperature = 110
+filament_type = CPE
+fan_below_layer_time = 20
+slowdown_below_layer_time = 15
+disable_fan_first_layers = 5
+
+[filament:Fiberlogy PCTG]
+inherits = Fiberlogy CPE HT
+filament_vendor = Fiberlogy
+filament_cost = 29.41
+filament_density = 1.23
+extrusion_multiplier = 0.98
+min_fan_speed = 10
+max_fan_speed = 15
+bridge_fan_speed = 50
+min_print_speed = 15
+first_layer_temperature = 265
+temperature = 265
+first_layer_bed_temperature = 90
+bed_temperature = 90
+filament_type = CPE
+fan_below_layer_time = 20
+slowdown_below_layer_time = 15
+disable_fan_first_layers = 5
+
+[filament:Fiberlogy FiberFlex 40D]
+inherits = *FLEX*
+filament_vendor = Fiberlogy
+fan_always_on = 1
+filament_max_volumetric_speed = 1.5
+extrusion_multiplier = 1.12
+first_layer_temperature = 230
+first_layer_bed_temperature = 60
+temperature = 230
+bed_temperature = 60
+bridge_fan_speed = 75
+min_fan_speed = 25
+max_fan_speed = 75
+filament_retract_before_travel = 2
+filament_cost = 39.41
+filament_density = 1.16
+filament_retract_length = 1.2
+filament_retract_speed = nil
+filament_deretract_speed = 20
+filament_retract_lift = 0
+filament_wipe = 0
+disable_fan_first_layers = 5
+full_fan_speed_layer = 5
+min_print_speed = 15
+cooling = 1
+filament_spool_weight = 330
+
+[filament:Fiberlogy FiberFlex 40D @MINI]
+inherits = *FLEXMINI*
+filament_vendor = Fiberlogy
+filament_max_volumetric_speed = 1.5
+fan_always_on = 1
+first_layer_temperature = 240
+first_layer_bed_temperature = 60
+temperature = 240
+bed_temperature = 60
+filament_retract_length = 4
+filament_retract_before_travel = 5
+bridge_fan_speed = 80
+min_fan_speed = 25
+max_fan_speed = 60
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+filament_cost = 84.68
+
+[filament:Fiberlogy MattFlex 40D]
+inherits = Fiberlogy FiberFlex 40D
+filament_vendor = Fiberlogy
+fan_always_on = 1
+filament_max_volumetric_speed = 1.35
+extrusion_multiplier = 1.1
+filament_retract_before_travel = 2
+filament_cost = 49.11
+filament_retract_length = 1.2
+
+[filament:Fiberlogy FiberFlex 30D]
+inherits = Fiberlogy FiberFlex 40D
+filament_max_volumetric_speed = 1.2
+extrusion_multiplier = 1.15
+first_layer_temperature = 240
+temperature = 240
+min_fan_speed = 25
+max_fan_speed = 60
+filament_density = 1.07
+filament_retract_length = 1.2
+
+[filament:Fiberlogy FiberSatin]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 215
+temperature = 215
+extrusion_multiplier = 1.03
+filament_density = 1.2
+filament_cost = 32.35
+
+[filament:Fiberlogy FiberSilk]
+inherits = Fiberlogy FiberSatin
+first_layer_temperature = 230
+temperature = 230
+extrusion_multiplier = 0.97
+filament_density = 1.22
+filament_cost = 32.35
+
+[filament:Fiberlogy FiberWood]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 185
+temperature = 185
+extrusion_multiplier = 1
+filament_density = 1.23
+filament_cost = 38.66
+filament_max_volumetric_speed = 8
+
+[filament:Fiberlogy HD PLA]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 230
+temperature = 230
+extrusion_multiplier = 1
+filament_density = 1.24
+filament_cost = 30.59
+
+[filament:Fiberlogy PLA Mineral]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 195
+temperature = 190
+extrusion_multiplier = 0.98
+filament_density = 1.38
+filament_cost = 37.64
+filament_max_volumetric_speed = 10
+
+[filament:Fiberlogy Impact PLA]
+inherits = Fiberlogy HD PLA
+filament_density = 1.22
+filament_cost = 27.65
+
+[filament:Fiberlogy Nylon PA12]
+inherits = Fiberlogy ASA
+filament_type = NYLON
+filament_density = 1.01
+filament_cost = 48
+first_layer_bed_temperature = 105
+bed_temperature = 110
+first_layer_temperature = 265
+temperature = 265
+min_fan_speed = 10
+max_fan_speed = 15
+fan_below_layer_time = 20
+bridge_fan_speed = 30
+fan_always_on = 0
+filament_retract_lift = 0.2
+filament_max_volumetric_speed = 6
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K26{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
+
+[filament:Fiberlogy Nylon PA12+CF15]
+inherits = Fiberlogy Nylon PA12
+extrusion_multiplier = 0.97
+filament_density = 1.07
+filament_cost = 87.5
+first_layer_bed_temperature = 105
+bed_temperature = 110
+first_layer_temperature = 265
+temperature = 265
+min_fan_speed = 10
+max_fan_speed = 15
+fan_below_layer_time = 20
+bridge_fan_speed = 30
+fan_always_on = 0
+filament_max_volumetric_speed = 8
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Fiberlogy Nylon PA12+GF15]
+inherits = Fiberlogy Nylon PA12+CF15
+filament_density = 1.13
+filament_max_volumetric_speed = 8
+
+[filament:Fiberlogy PP]
+inherits = *ABS*
+filament_vendor = Fiberlogy
+filament_cost = 36.67
+filament_density = 1.05
+extrusion_multiplier = 1.05
+filament_spool_weight = 330
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 25
+bridge_fan_speed = 70
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 245
+temperature = 245
+first_layer_bed_temperature = 0
+bed_temperature = 0
+filament_type = PP
+fan_below_layer_time = 100
+disable_fan_first_layers = 5
+filament_max_volumetric_speed = 5
 
 [filament:Filament PM PLA]
 inherits = *PLA*
@@ -3736,7 +4016,7 @@ filament_density = 1.24
 inherits = *PLA*
 filament_vendor = Prusa Polymers
 temperature = 215
-filament_cost = 30.24
+filament_cost = 36.29
 filament_density = 1.24
 filament_spool_weight = 201
 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
@@ -3790,7 +4070,7 @@ filament_spool_weight = 230
 [filament:Prusament PLA @MMU2]
 inherits = *PLA MMU2*
 filament_vendor = Prusa Polymers
-filament_cost = 30.24
+filament_cost = 36.29
 filament_density = 1.24
 filament_spool_weight = 201
 
@@ -4124,8 +4404,9 @@ renamed_from = "Plasty Mladec PETG @MMU1"
 [filament:Verbatim PETG @MMU1]
 inherits = Verbatim PETG; *PETMMU1*
 
-[filament:Fiberlogy PETG @MMU1]
+[filament:Fiberlogy Easy PET-G @MMU1]
-inherits = Fiberlogy PETG; *PETMMU1*
+inherits = Fiberlogy Easy PET-G; *PETMMU1*
+renamed_from = Fiberlogy PETG @MMU1
 
 [filament:Prusa PETG @MMU1]
 inherits = Prusa PETG; *PETMMU1*
@@ -4215,8 +4496,9 @@ compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.
 inherits = Verbatim PETG; *PETMINI*
 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
 
-[filament:Fiberlogy PETG @MINI]
+[filament:Fiberlogy Easy PET-G @MINI]
-inherits = Fiberlogy PETG; *PETMINI*
+inherits = Fiberlogy Easy PET-G; *PETMINI*
+renamed_from = Fiberlogy PETG @MINI
 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
 
 [filament:Generic ABS @MINI]
@@ -4303,8 +4585,9 @@ renamed_from = "Plasty Mladec PETG @0.6 nozzle MINI"
 [filament:Verbatim PETG @0.6 nozzle MINI]
 inherits = Verbatim PETG; *PETMINI06*
 
-[filament:Fiberlogy PETG @0.6 nozzle MINI]
+[filament:Fiberlogy Easy PET-G @0.6 nozzle MINI]
-inherits = Fiberlogy PETG; *PETMINI06*
+inherits = Fiberlogy Easy PET-G; *PETMINI06*
+renamed_from = Fiberlogy PETG @0.6 nozzle MINI
 
 [filament:Prusament ASA @MINI]
 inherits = Prusament ASA; *ABSMINI*