From e6f95515c78336d16edd115215b45906abb02577 Mon Sep 17 00:00:00 2001 From: YuSanka Date: Fri, 17 Jun 2022 17:40:39 +0200 Subject: [PATCH] Localization: Some phrases are fixed --- src/libslic3r/PrintConfig.cpp | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 952ff508a3..7ba06e897b 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -1804,10 +1804,10 @@ void PrintConfigDef::init_fff_params() def = this->add("max_volumetric_extrusion_rate_slope_positive", coFloat); def->label = L("Max volumetric slope positive"); - def->tooltip = L("This experimental setting is used to limit the speed of change in extrusion rate" + def->tooltip = L("This experimental setting is used to limit the speed of change in extrusion rate " "for a transition from lower speed to higher speed. " "A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " - "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/s) " + "of 1.8 mm³/s (0.45 mm extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) " "to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."); def->sidetext = L("mm³/s²"); def->min = 0; @@ -1816,10 +1816,10 @@ void PrintConfigDef::init_fff_params() def = this->add("max_volumetric_extrusion_rate_slope_negative", coFloat); def->label = L("Max volumetric slope negative"); - def->tooltip = L("This experimental setting is used to limit the speed of change in extrusion rate" + def->tooltip = L("This experimental setting is used to limit the speed of change in extrusion rate " "for a transition from higher speed to lower speed. " "A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " - "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 60 mm/s) " + "of 1.8 mm³/s (0.45 mm extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) " "to 5.4 mm³/s (feedrate 20 mm/s) will take at least 2 seconds."); def->sidetext = L("mm³/s²"); def->min = 0; @@ -3064,9 +3064,9 @@ void PrintConfigDef::init_fff_params() def = this->add("perimeter_generator", coEnum); def->label = L("Perimeter generator"); def->category = L("Layers and Perimeters"); - def->tooltip = L("Classic perimeter generator produces perimeters with constant extrusion width and for" - " very thing areas is used gap-fill." - "Arachne produces perimeters with variable extrusion width."); + def->tooltip = L("Classic perimeter generator produces perimeters with constant extrusion width and for " + "very thing areas is used gap-fill. " + "Arachne engine produces perimeters with variable extrusion width."); def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("classic"); def->enum_values.push_back("arachne"); @@ -3305,7 +3305,7 @@ void PrintConfigDef::init_sla_params() def = this->add("high_viscosity_tilt_time", coFloat); def->label = L("High viscosity"); - def->full_label = L("High viscosity tilt"); + def->full_label = L("Tilt for high viscosity resin"); def->tooltip = L("Time of the super slow tilt"); def->sidetext = L("s"); def->min = 0; @@ -3922,7 +3922,7 @@ void PrintConfigDef::init_sla_params() def->enum_values.push_back("high_viscosity"); def->enum_labels.push_back(L("Slow")); def->enum_labels.push_back(L("Fast")); - def->enum_labels.push_back(L("High Viscosity")); + def->enum_labels.push_back(L("High viscosity")); def->mode = comAdvanced; def->set_default_value(new ConfigOptionEnum(slamsFast)); }