diff --git a/resources/profiles/RatRig.ini b/resources/profiles/RatRig.ini
index 041265e3e3..ff18030d3a 100644
--- a/resources/profiles/RatRig.ini
+++ b/resources/profiles/RatRig.ini
@@ -83,7 +83,7 @@ extruder_clearance_radius = 45
 extrusion_width = 0.4
 fill_angle = 45
 fill_density = 15%
-fill_pattern = adaptivecubic
+fill_pattern = cubic
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
@@ -198,7 +198,7 @@ dont_support_bridges = 1
 draft_shield = 0
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.4
-external_perimeter_speed = 100
+external_perimeter_speed = 110
 extra_perimeters = 0
 extra_perimeters_overhangs = 0
 extruder_clearance_height = 25
@@ -206,7 +206,7 @@ extruder_clearance_radius = 45
 extrusion_width = 0.4
 fill_angle = 45
 fill_density = 15%
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
@@ -215,7 +215,7 @@ gap_fill = 1
 gap_fill_speed = 50
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 2000
+infill_acceleration = 3000
 infill_anchor = 600%
 infill_anchor_max = 5
 infill_every_layers = 1
@@ -239,13 +239,13 @@ notes =
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
-perimeter_acceleration = 1500
+perimeter_acceleration = 2500
 perimeter_bonding = 0%
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.4
 perimeter_overlap = 100%
 perimeter_round_corners = 0
-perimeter_speed = 100
+perimeter_speed = 120
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -344,11 +344,11 @@ perimeter_speed = 160
 small_perimeter_speed = 25
 solid_infill_speed = 80%
 top_solid_infill_speed = 60%
-fill_pattern = rectilinear
+fill_pattern = cubic
 
 [print:0.20mm NORMAL @RatRig]
 inherits = *common*; *0.2mm*
-fill_pattern = rectilinear
+fill_pattern = cubic
 external_perimeter_speed = 120
 infill_speed = 160
 compatible_printers_condition = printer_model=~/.*VC3_.*/ and nozzle_diameter[0]==0.4
@@ -361,7 +361,7 @@ bottom_solid_layers = 3
 [print:0.15mm QUALITY V-Minion @RatRig]
 inherits = *common_minion*; *0.15mm*
 compatible_printers_condition = printer_model=~/.*MINION.*/ 
-solid_infill_speed = 100
+solid_infill_speed = 120
 
 [print:0.20mm HF @RatRig]
 inherits = 0.15mm HF @RatRig; *0.2mm*
@@ -436,7 +436,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 40
 silent_mode = 0
 single_extruder_multi_material = 0
-start_gcode = START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\n;enable this if you have a BTT Smart Filament Sensor\n;SET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=0\n
+start_gcode = M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode interfering with the macro\nM109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro\nSTART_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\n;enable this if you have a BTT Smart Filament Sensor\nSET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=0\n
 thumbnails = 16x16,220x220
 toolchange_gcode = 
 use_firmware_retraction = 0
@@ -499,7 +499,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 40
 silent_mode = 0
 single_extruder_multi_material = 0
-start_gcode = START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\n;enable this if you have a BTT Smart Filament Sensor\n;SET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=0\n
+start_gcode = M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode interfering with the macro\nM109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro\nSTART_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\n;enable this if you have a BTT Smart Filament Sensor\nSET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=0\n
 start_gcode_manual = 0
 template_custom_gcode = 
 thumbnails = 16x16,220x220