add a new machine named M5C for ankermake

Signed-off-by: august.chi <august.chi@anker-in.com>

resources/profiles/Anker.ini

@@ -26,6 +26,15 @@ default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER;
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
+[printer_model:M5C]
+    name = AnkerMake M5C
+    variants = 0.4
+    technology = FFF
+    family = AnkerMake
+    bed_model = M5C-bed.stl
+    bed_texture = M5C-texture_v2.svg
+    thumbnail = M5C_thumbnail_v2.png
+    default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER; 
 
 # Common print preset
 [print:*common*]
@@ -50,13 +59,12 @@ extruder_clearance_height = 30
     extruder_clearance_radius = 45
     extrusion_width = 0.4
     external_perimeter_extrusion_width = 0.44
-
     fill_angle = 45
     fill_density = 10%
     fill_pattern = grid
     first_layer_acceleration = 2500
     first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.4
+    first_layer_extrusion_width = 100%
     first_layer_speed = 50%
     first_layer_speed_over_raft = 30
     gap_fill_enabled = 1
@@ -86,7 +94,7 @@ overhangs = 1
     perimeter_acceleration = 2500
     perimeter_extruder = 1
     perimeter_extrusion_width = 0.4
-perimeter_generator = classic
+    perimeter_generator = arachne
     perimeter_speed = 250
     perimeters = 3
     post_process = 
@@ -120,7 +128,7 @@ support_material_interface_spacing = 0.2
     support_material_interface_speed = 80%
     support_material_pattern = rectilinear
     support_material_spacing = 2
-support_material_speed = 150
+    support_material_speed = 125
     support_material_synchronize_layers = 0
     support_material_threshold = 55
     support_material_with_sheath = 0
@@ -166,16 +174,669 @@ top_solid_layers = 4
 
 [print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
     inherits = *0.10mm*
-compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
+    compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
 
 [print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
     inherits = *0.20mm*
-compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
+    compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
 
 
 [print:0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
     inherits = *0.30mm*
-compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
+    compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
+
+[print:Precision - M5C (0.4 mm nozzle) @ANKER]
+    compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_PRECISION).*/ and nozzle_diameter[0]==0.4
+
+    #add by august<
+    avoid_crossing_curled_overhangs = 0
+    avoid_crossing_perimeters = 0
+    avoid_crossing_perimeters_max_detour = 0
+    bottom_fill_pattern = rectilinear
+    bottom_solid_layers = 3
+    bottom_solid_min_thickness = 0.8
+    bridge_acceleration = 500
+    bridge_angle = 0
+    bridge_flow_ratio = 1
+    bridge_speed = 30
+    brim_separation = 0.1
+    brim_type = no_brim
+    brim_width = 8
+    complete_objects = 0
+    default_acceleration = 4000
+    dont_support_bridges = 1
+    draft_shield = disabled
+    elefant_foot_compensation = 0
+    enable_dynamic_overhang_speeds = 1
+    external_perimeter_acceleration = 3000
+    external_perimeter_extrusion_width = 0.44
+    external_perimeter_speed = 75
+    external_perimeters_first = 1
+    extra_perimeters = 1
+    extra_perimeters_on_overhangs = 0
+    extruder_clearance_height = 20
+    extruder_clearance_radius = 20
+    extrusion_width = 0.4
+    fill_angle = 45
+    fill_density = 10%
+    fill_pattern = grid
+    first_layer_acceleration = 2500
+    first_layer_acceleration_over_raft = 0
+    first_layer_extrusion_width = 0.5
+    first_layer_height = 0.14
+    first_layer_speed = 50
+    first_layer_speed_over_raft = 30
+    fuzzy_skin = none
+    fuzzy_skin_point_dist = 0.8
+    fuzzy_skin_thickness = 0.3
+    gap_fill_enabled = 1
+    gap_fill_speed = 75
+
+    gcode_comments = 0
+    gcode_label_objects = 0
+    gcode_resolution = 0.0125
+    gcode_substitutions = "(G28 ;Home.*$)";"${1}\\nM4899 T3\\n";;";S-Curve"
+    infill_acceleration = 4000
+    infill_anchor = 30
+    infill_anchor_max = 60
+    infill_every_layers = 1
+    infill_extruder = 1
+    infill_extrusion_width = 0.4
+    infill_first = 0
+    infill_overlap = 25%
+    infill_speed = 250
+    interface_shells = 0
+    ironing = 0
+    ironing_flowrate = 15%
+    ironing_spacing = 0.1
+    ironing_speed = 15
+    ironing_type = top
+    layer_height = 0.16
+    max_print_speed = 500
+    max_volumetric_extrusion_rate_slope_negative = 0
+    max_volumetric_extrusion_rate_slope_positive = 0
+    max_volumetric_speed = 0
+    min_bead_width = 85%
+    min_feature_size = 25%
+    min_skirt_length = 0
+    mmu_segmented_region_max_width = 0
+    only_retract_when_crossing_perimeters = 0
+    ooze_prevention = 0
+    output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
+    overhang_speed_0 = 25
+    overhang_speed_1 = 55
+    overhang_speed_2 = 55
+    overhang_speed_3 = 100%
+    overhangs = 1
+    perimeter_acceleration = 3000
+    perimeter_extruder = 1
+    perimeter_extrusion_width = 0.4
+    perimeter_generator = classic
+    perimeter_speed = 200
+    perimeters = 2
+    post_process = 
+    print_settings_id = 
+    raft_contact_distance = 0.1
+    raft_expansion = 1.5
+    raft_first_layer_density = 90%
+    raft_first_layer_expansion = 0
+    raft_layers = 0
+    resolution = 0
+    seam_position = aligned
+    single_extruder_multi_material_priming = 1
+    skirt_distance = 6
+    skirt_height = 1
+    skirts = 1
+    slice_closing_radius = 0.049
+    slicing_mode = regular
+    small_perimeter_speed = 75
+    solid_infill_acceleration = 2500
+    solid_infill_below_area = 0
+    solid_infill_every_layers = 0
+    solid_infill_extruder = 1
+    solid_infill_extrusion_width = 0.4
+    solid_infill_speed = 100
+    spiral_vase = 0
+    staggered_inner_seams = 0
+    standby_temperature_delta = -5
+    support_material = 0
+    support_material_angle = 90
+    support_material_auto = 1
+    support_material_bottom_contact_distance = 0
+    support_material_bottom_interface_layers = -1
+    support_material_buildplate_only = 0
+    support_material_closing_radius = 2
+    support_material_contact_distance = 0.2
+    support_material_enforce_layers = 0
+    support_material_extruder = 1
+    support_material_extrusion_width = 0.3
+    support_material_interface_contact_loops = 0
+    support_material_interface_extruder = 1
+    support_material_interface_layers = 0
+    support_material_interface_pattern = rectilinear
+    support_material_interface_spacing = 0.2
+    support_material_interface_speed = 100%
+    support_material_pattern = rectilinear
+    support_material_spacing = 1.333
+    support_material_speed = 150
+    support_material_style = grid
+    support_material_synchronize_layers = 0
+    support_material_threshold = 30
+    support_material_with_sheath = 0
+    support_material_xy_spacing = 0.8
+    support_tree_angle = 40
+    support_tree_angle_slow = 25
+    support_tree_branch_diameter = 2
+    support_tree_branch_diameter_angle = 5
+    support_tree_branch_distance = 1
+    support_tree_tip_diameter = 0.8
+    support_tree_top_rate = 15%
+    thick_bridges = 0
+    thin_walls = 1
+    threads = 10
+    top_fill_pattern = rectilinear
+    top_infill_extrusion_width = 0.2
+    top_solid_infill_acceleration = 2500
+    top_solid_infill_speed = 50
+    top_solid_layers = 5
+    top_solid_min_thickness = 0.8
+    travel_acceleration = 4000
+    travel_speed = 500
+    travel_speed_z = 10
+    wall_distribution_count = 1
+    wall_transition_angle = 10
+    wall_transition_filter_deviation = 25%
+    wall_transition_length = 100%
+    wipe_tower = 0
+    wipe_tower_bridging = 10
+    wipe_tower_brim_width = 2
+    wipe_tower_cone_angle = 0
+    wipe_tower_extra_spacing = 100%
+    wipe_tower_no_sparse_layers = 0
+    wipe_tower_rotation_angle = 0
+    wipe_tower_width = 60
+    wipe_tower_x = 180
+    wipe_tower_y = 140
+    xy_size_compensation = 0
+
+    ## Jerk(X&Y)
+    jerk_enable = 1
+    jerk_travel = 8
+    jerk_print = 8
+    jerk_infill = 8
+    jerk_outer_wall = 8
+    jerk_inner_wall = 8
+    jerk_top_bottom = 8
+    jerk_skirt_brim = 8
+
+    ## Jerk(E) 
+    jerk_e_enable = 1
+    jerk_e_print = 2
+    jerk_e_infill = 2
+    jerk_e_outer_wall = 2
+    jerk_e_inner_wall = 2
+    jerk_e_skin = 2
+    jerk_e_support = 2
+    jerk_e_skirt_brim = 2
+
+    optimize_wall_printing_order = 1
+    precise_outer_wall = 1
+    inter_ext_perimeter_spacing = 0.0
+
+    slowdown_external_perimeters = 0
+
+[print:Normal - M5C (0.4 mm nozzle) @ANKER]
+    inherits = *param 0.4 P_NORMAL 0.20*
+    notes = PRINT_COMPATIBLE\n P_NORMAL\n F_PLA__Basic\n
+    compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_NORMAL).*/ and nozzle_diameter[0]==0.4
+    #The early optimization parameter item override
+        #top_infill_extrusion_width = 0.4
+
+    #add by august<
+    #print---august
+    avoid_crossing_curled_overhangs = 0
+    avoid_crossing_perimeters = 0
+    avoid_crossing_perimeters_max_detour = 0
+    bottom_fill_pattern = rectilinear
+    bottom_solid_layers = 4
+    bottom_solid_min_thickness = 0.8
+    bridge_acceleration = 500
+    bridge_angle = 0
+    bridge_flow_ratio = 1
+    bridge_speed = 30
+    brim_separation = 0.1
+    brim_type = no_brim
+    brim_width = 8
+    complete_objects = 0
+    default_acceleration = 2500
+    dont_support_bridges = 1
+    draft_shield = disabled
+    elefant_foot_compensation = 0
+    enable_dynamic_overhang_speeds = 1
+    external_perimeter_acceleration = 2500
+    external_perimeter_extrusion_width = 0.44
+    external_perimeter_speed = 150
+    external_perimeters_first = 1
+    extra_perimeters = 1
+    extra_perimeters_on_overhangs = 0
+    extruder_clearance_height = 20
+    extruder_clearance_radius = 20
+    extrusion_width = 0.4
+
+    fill_angle = 45
+    fill_density = 10%
+    fill_pattern = grid
+    first_layer_acceleration = 2500
+    first_layer_acceleration_over_raft = 0
+    first_layer_extrusion_width = 0.5
+    first_layer_height = 0.14
+    first_layer_speed = 50
+    first_layer_speed_over_raft = 30
+    fuzzy_skin = none
+    fuzzy_skin_point_dist = 0.8
+    fuzzy_skin_thickness = 0.3
+    gap_fill_enabled = 1
+    gap_fill_speed = 75
+    gcode_comments = 0
+    gcode_label_objects = 0
+    gcode_resolution = 0.0125
+    gcode_substitutions = 
+
+    infill_acceleration = 2500
+    infill_anchor = 30
+    infill_anchor_max = 60
+    infill_every_layers = 1
+    infill_extruder = 1
+    infill_extrusion_width = 0.4
+    infill_first = 0
+    infill_overlap = 25%
+    infill_speed = 250
+    interface_shells = 0
+    ironing = 0
+    ironing_flowrate = 15%
+    ironing_spacing = 0.1
+    ironing_speed = 15
+    ironing_type = top
+    layer_height = 0.2
+
+    max_print_speed = 250
+    max_volumetric_extrusion_rate_slope_negative = 0
+    max_volumetric_extrusion_rate_slope_positive = 0
+    max_volumetric_speed = 0
+    min_bead_width = 85%
+    min_feature_size = 25%
+    min_skirt_length = 0
+    mmu_segmented_region_max_width = 0
+    #notes = 
+    only_retract_when_crossing_perimeters = 0
+    ooze_prevention = 0
+    output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
+
+    overhang_speed_0 = 15
+    overhang_speed_1 = 20
+    overhang_speed_2 = 30
+    overhang_speed_3 = 30
+    overhangs = 1
+    perimeter_acceleration = 2500
+    perimeter_extruder = 1
+    perimeter_extrusion_width = 0.4
+    perimeter_generator = classic
+    perimeter_speed = 250
+    perimeters = 3
+    post_process = 
+
+    raft_contact_distance = 0.1
+    raft_expansion = 1.5
+    raft_first_layer_density = 90%
+    raft_first_layer_expansion = 0
+    raft_layers = 0
+    resolution = 0
+
+    seam_position = aligned
+    single_extruder_multi_material_priming = 1
+    skirt_distance = 6
+    skirt_height = 1
+    skirts = 1
+    slice_closing_radius = 0.049
+    slicing_mode = regular
+    small_perimeter_speed = 75
+    solid_infill_acceleration = 2500
+    solid_infill_below_area = 0
+    solid_infill_every_layers = 0
+    solid_infill_extruder = 1
+    solid_infill_extrusion_width = 0.4
+    solid_infill_speed = 150
+    spiral_vase = 0
+    staggered_inner_seams = 0
+    standby_temperature_delta = -5
+    support_material = 0
+    support_material_angle = 90
+    support_material_auto = 1
+    support_material_bottom_contact_distance = 0
+    support_material_bottom_interface_layers = -1
+    support_material_buildplate_only = 0
+    support_material_closing_radius = 2
+    support_material_contact_distance = 0.2
+    support_material_enforce_layers = 0
+    support_material_extruder = 1
+    support_material_extrusion_width = 0.3
+    support_material_interface_contact_loops = 0
+    support_material_interface_extruder = 1
+    support_material_interface_layers = 0
+    support_material_interface_pattern = rectilinear
+    support_material_interface_spacing = 0.2
+    support_material_interface_speed = 100%
+    support_material_pattern = rectilinear
+    support_material_spacing = 1.333
+    support_material_speed = 150
+    support_material_style = grid
+    support_material_synchronize_layers = 0
+    support_material_threshold = 30
+    support_material_with_sheath = 0
+    support_material_xy_spacing = 0.8
+    support_tree_angle = 40
+    support_tree_angle_slow = 25
+    support_tree_branch_diameter = 2
+    support_tree_branch_diameter_angle = 5
+    support_tree_branch_distance = 1
+    support_tree_tip_diameter = 0.8
+    support_tree_top_rate = 15%
+    thick_bridges = 0
+    thin_walls = 1
+
+    top_fill_pattern = rectilinear
+    top_infill_extrusion_width = 0.4
+    top_solid_infill_acceleration = 2500
+    top_solid_infill_speed = 150
+    top_solid_layers = 4
+    top_solid_min_thickness = 0.8
+    travel_acceleration = 2500
+    travel_speed = 250
+    travel_speed_z = 10
+
+    wall_distribution_count = 1
+    wall_transition_angle = 10
+    wall_transition_filter_deviation = 25%
+    wall_transition_length = 100%
+    wipe_tower = 0
+    wipe_tower_bridging = 10
+    wipe_tower_brim_width = 2
+    wipe_tower_cone_angle = 0
+    wipe_tower_extra_spacing = 100%
+    wipe_tower_extruder = 0
+    wipe_tower_no_sparse_layers = 0
+    wipe_tower_rotation_angle = 0
+    wipe_tower_width = 60
+    wipe_tower_x = 180
+    wipe_tower_y = 140
+    xy_size_compensation = 0
+
+    #²ÂÏë
+    support_tree_branch_diameter_double_wall = 3
+
+    ## Jerk(X&Y)
+    jerk_enable = 1
+    jerk_travel = 10
+    jerk_print = 10
+    jerk_infill = 10
+    jerk_outer_wall = 8
+    jerk_inner_wall = 8
+    jerk_top_bottom = 10
+    jerk_skirt_brim = 10
+
+    ## Jerk(E) 
+    jerk_e_enable = 0
+    jerk_e_print = 5
+    jerk_e_infill = 5
+    jerk_e_outer_wall = 5
+    jerk_e_inner_wall = 5
+    jerk_e_skin = 5
+    jerk_e_support = 5
+    jerk_e_skirt_brim = 5
+
+    optimize_wall_printing_order = 1
+    precise_outer_wall = 1
+    inter_ext_perimeter_spacing = 0.0
+
+    slowdown_external_perimeters = 0
+
+[print:Fast - M5C (0.4 mm nozzle) @ANKER]
+    inherits = *param 0.4 P_FAST 0.25*
+
+    #add by august<
+    #print---august
+    layer_height = 0.25
+    first_layer_height = 0.14
+    perimeters = 2
+    spiral_vase = 0
+
+    top_solid_layers = 4
+    bottom_solid_layers = 3
+    top_solid_min_thickness = 0.8
+    bottom_solid_min_thickness = 0.8
+
+    extra_perimeters = 1
+    extra_perimeters_on_overhangs = 0
+    avoid_crossing_curled_overhangs = 0
+    avoid_crossing_perimeters = 0
+    avoid_crossing_perimeters_max_detour = 0
+    thin_walls = 1
+    thick_bridges = 0
+    overhangs = 1
+
+    seam_position = aligned
+    staggered_inner_seams = 0
+    external_perimeters_first = 1
+    gap_fill_enabled = 1
+    perimeter_generator = classic
+
+    fuzzy_skin = none
+    fuzzy_skin_point_dist = 0.8
+    fuzzy_skin_thickness = 0.3
+
+    fill_density = 10%
+    fill_pattern = grid
+    infill_anchor = 30
+    infill_anchor_max = 60
+    top_fill_pattern = rectilinear
+    bottom_fill_pattern = rectilinear
+
+    ironing = 0
+    ironing_type = top
+    ironing_flowrate = 15%
+    ironing_spacing = 0.1
+
+    infill_every_layers = 1
+
+    solid_infill_every_layers = 0
+    fill_angle = 45
+    solid_infill_below_area = 0
+    bridge_angle = 0
+    only_retract_when_crossing_perimeters = 0
+    infill_first = 0
+    # Skirt and brim
+    skirts = 1
+    skirt_distance = 6
+    skirt_height = 1
+    draft_shield = disabled
+    min_skirt_length = 0
+
+    brim_separation = 0.1
+    brim_type = no_brim
+    brim_width = 8
+
+    support_material = 0
+    support_material_auto = 1
+    support_material_threshold = 30
+    support_material_enforce_layers = 0
+    raft_first_layer_density = 90%
+    raft_first_layer_expansion = 0
+
+    raft_layers = 0
+    raft_contact_distance = 0.1
+    raft_expansion = 1.5
+
+    support_material_style = grid
+    support_material_contact_distance = 0.2
+    support_material_bottom_contact_distance = 0
+    support_material_pattern = rectilinear
+    support_material_with_sheath = 0
+    support_material_spacing = 1.333
+    support_material_angle = 90
+    support_material_closing_radius = 2
+    support_material_interface_layers = 0
+    support_material_bottom_interface_layers = -1
+    support_material_interface_pattern = rectilinear
+    support_material_interface_spacing = 0.2
+    support_material_interface_contact_loops = 0
+    support_material_buildplate_only = 0
+    support_material_xy_spacing = 0.8
+    dont_support_bridges = 1
+    support_material_synchronize_layers = 0
+
+    support_tree_angle = 40
+    support_tree_angle_slow = 25
+    support_tree_branch_diameter = 2
+    support_tree_branch_diameter_angle = 5
+    support_tree_tip_diameter = 0.8
+    support_tree_branch_distance = 1
+    support_tree_top_rate = 15%
+
+    # Speed
+    perimeter_speed = 250
+    small_perimeter_speed = 75
+    external_perimeter_speed = 150
+    infill_speed = 270
+    solid_infill_speed = 100
+    top_solid_infill_speed = 100
+    support_material_speed = 150
+    support_material_interface_speed = 100%
+    bridge_speed = 20
+    gap_fill_speed = 75
+    ironing_speed = 15
+    infill_flow_ratio = 1
+
+    enable_dynamic_overhang_speeds = 1
+    overhang_speed_0 = 15
+    overhang_speed_1 = 20
+    overhang_speed_2 = 30
+    overhang_speed_3 = 30
+
+    travel_speed = 500
+    travel_speed_z = 10
+
+    first_layer_speed = 50
+    first_layer_speed_over_raft = 30
+
+    external_perimeter_acceleration = 3000
+    perimeter_acceleration = 5000
+    top_solid_infill_acceleration = 4000
+    solid_infill_acceleration = 4000
+    infill_acceleration = 5000
+    bridge_acceleration = 500
+    first_layer_acceleration = 2500
+    first_layer_acceleration_over_raft = 0
+    travel_acceleration = 5000
+    default_acceleration = 5000
+
+    max_print_speed = 500
+    max_volumetric_speed = 0
+
+    max_volumetric_extrusion_rate_slope_negative = 0
+    max_volumetric_extrusion_rate_slope_positive = 0
+
+    # Multiple Extruders
+    perimeter_extruder = 1
+    infill_extruder = 1
+    solid_infill_extruder = 1
+    support_material_extruder = 1
+    support_material_interface_extruder = 1
+    ooze_prevention = 0
+    standby_temperature_delta = -5
+
+    wipe_tower = 0
+    wipe_tower_bridging = 10
+    wipe_tower_brim_width = 2
+    wipe_tower_cone_angle = 0
+    wipe_tower_extra_spacing = 100%
+    wipe_tower_extruder = 0
+    wipe_tower_no_sparse_layers = 0
+    wipe_tower_rotation_angle = 0
+    wipe_tower_width = 60
+    wipe_tower_x = 180
+    wipe_tower_y = 140
+
+    single_extruder_multi_material_priming = 1
+    interface_shells = 0
+    mmu_segmented_region_max_width = 0
+    # Advanced
+    extrusion_width = 0.4
+    first_layer_extrusion_width = 0.5
+    perimeter_extrusion_width = 0.4
+    external_perimeter_extrusion_width = 0.44
+    infill_extrusion_width = 0.4
+    solid_infill_extrusion_width = 0.4
+    support_material_extrusion_width = 0.3
+    support_material_flow_ratio =0.9
+    top_infill_extrusion_width = 0.4
+    infill_overlap = 25%
+    bridge_flow_ratio = 1
+    slice_closing_radius = 0.049
+    slicing_mode = regular
+    resolution = 0
+    gcode_resolution = 0.0125
+    xy_size_compensation = 0
+    elefant_foot_compensation = 0
+    wall_transition_angle = 10
+    wall_transition_filter_deviation = 25%
+    wall_transition_length = 100%
+    wall_distribution_count = 1
+    min_bead_width = 85%
+    min_feature_size = 25%
+    # Output options
+    complete_objects = 0
+    extruder_clearance_height = 20
+    extruder_clearance_radius = 20
+    gcode_comments = 0
+    gcode_label_objects = 0
+    output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
+    gcode_substitutions = "(G28 ;Home.*$)";"${1}\\nM4899 T3\\nM900 T0 K0.04\\n";r;";S-Curve";"M104 S200 ; set temperature";"M104 S220 ; set temperature";;
+
+    post_process = 
+    #notes = 
+
+    #No
+    support_tree_branch_diameter_double_wall = 3
+
+    ## Jerk(X&Y)
+    jerk_enable = 1
+    jerk_travel = 14
+    jerk_print = 14
+    jerk_infill = 14
+    jerk_outer_wall = 14
+    jerk_inner_wall = 14
+    jerk_top_bottom = 14
+    jerk_skirt_brim = 14
+
+    ## Jerk(E) 
+    jerk_e_enable = 1
+    jerk_e_print = 3
+    jerk_e_infill = 3
+    jerk_e_outer_wall = 3
+    jerk_e_inner_wall = 3
+    jerk_e_skin = 3
+    jerk_e_support = 3
+    jerk_e_skirt_brim = 3
+
+    optimize_wall_printing_order = 1
+    precise_outer_wall = 1
+    inter_ext_perimeter_spacing = 0.0
+
+    slowdown_external_perimeters = 0
+    #add by august>
+    notes = PRINT_COMPATIBLE\n P_FAST\n F_PLA__Basic\n
+    compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_FAST).*/ and nozzle_diameter[0]==0.4
+
 
 # When submitting new filaments please print the following temperature tower at 0.1mm layer height:
 #   https://www.thingiverse.com/thing:2615842
@@ -186,7 +847,7 @@ compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==
 # So having some leeway to get good bed adhesion is not a luxury for many users
 
 [filament:*common*]
-cooling = 0
+    cooling = 1
     compatible_printers = 
     extrusion_multiplier = 1
     filament_cost = 0
@@ -218,13 +879,13 @@ temperature = 200
 
 [filament:*PLA+*]
     inherits = *common*
-bed_temperature = 60
+    bed_temperature = 65
     fan_below_layer_time = 100
     filament_colour = #DDDDDD
     filament_type = PLA+
     filament_density = 1.24
     filament_cost = 20
-first_layer_bed_temperature = 60
+    first_layer_bed_temperature = 65
     first_layer_temperature = 230
     fan_always_on = 1
     max_fan_speed = 100
@@ -243,12 +904,12 @@ filament_type = PETG
     filament_density = 1.27
     filament_cost = 30
     first_layer_bed_temperature = 80
-first_layer_temperature = 260
+    first_layer_temperature = 255
     fan_always_on = 1
     max_fan_speed = 50
     min_fan_speed = 50
     bridge_fan_speed = 100
-temperature = 260
+    temperature = 255
 
 [filament:*ABS*]
     inherits = *common*
@@ -260,13 +921,13 @@ filament_type = ABS
     filament_density = 1.04
     filament_cost = 20
     first_layer_bed_temperature = 90
-first_layer_temperature = 260
+    first_layer_temperature = 255
     fan_always_on = 0
     max_fan_speed = 0
     min_fan_speed = 0
     bridge_fan_speed = 30
     top_fan_speed = 0
-temperature = 260
+    temperature = 255
 
 [filament:Generic PLA @ANKER]
 inherits = *PLA*
@@ -289,60 +950,98 @@ filament_vendor = Generic
 
 # Common printer preset
 [printer:*common*]
-printer_technology = FFF
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}
-between_objects_gcode = 
-pause_print_gcode = 
-deretract_speed = 60
-extruder_colour = #FCE94F
-extruder_offset = 0x0
-gcode_flavor = marlin
-silent_mode = 1
-remaining_times = 1
-machine_max_acceleration_e = 2500
-machine_max_acceleration_extruding = 2500
-machine_max_acceleration_retracting = 2500
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 2500
-machine_max_acceleration_y = 2500
-machine_max_acceleration_z = 2500
-machine_max_feedrate_e = 100
-machine_max_feedrate_x = 300
-machine_max_feedrate_y = 300
-machine_max_feedrate_z = 20
-machine_max_jerk_e = 3
-machine_max_jerk_x = 15
-machine_max_jerk_y = 15
-machine_max_jerk_z = 0.3
-machine_min_extruding_rate = 0
-machine_min_travel_rate = 0
-layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
+    printer_vendor = AnkerMake
+        # General
+            ## Size and coordinates
+                bed_shape = 0x0,235x0,235x235,0x235
                 max_print_height = 250
-printer_notes = 
-printer_settings_id = 
-retract_before_travel = 3
-retract_before_wipe = 0
-retract_layer_change = 1
-retract_length_toolchange = 4
+                z_offset = 0
+            ## Capabilities
+                #extruders_count = 1
+                single_extruder_multi_material = 0
+            ## Firmware
+                gcode_flavor = marlin2
+                thumbnails = 256x256
+                thumbnails_format = PNG
+                silent_mode = 0
+                remaining_times = 1
+            ## Advanced
+                use_relative_e_distances = 1
+                use_firmware_retraction = 0
+                use_volumetric_e = 0
+                variable_layer_height = 1
+
+        # Custom G-code
+                start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
+                autoemit_temperature_commands = 1
+                end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
+                before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
+                layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
+                toolchange_gcode = 
+                between_objects_gcode = 
+                color_change_gcode = M600
+                pause_print_gcode = M601
+                template_custom_gcode = 
+            
+        # Machine limits
+            ## General
+                ### machine_limits_usage = emit_to_gcode  time_estimate_only  ignore
+                machine_limits_usage = time_estimate_only
+            ## Maximum feedrates
+                 machine_max_feedrate_e = 100
+                 machine_max_feedrate_x = 500,500
+                 machine_max_feedrate_y = 500,500
+                 machine_max_feedrate_z = 50,50
+            ## Maximum accelerations
+                machine_max_acceleration_e = 10000,5000
+                machine_max_acceleration_extruding = 10000,5000
+                machine_max_acceleration_retracting = 10000,5000
+                machine_max_acceleration_travel = 10000,5000
+                machine_max_acceleration_x = 10000,5000
+                machine_max_acceleration_y = 10000,5000
+                machine_max_acceleration_z = 10000,5000
+            ## Jerk limits
+                machine_max_jerk_x = 15, 15
+                machine_max_jerk_y = 15, 15
+                machine_max_jerk_z = 0.3, 0.3
+                machine_max_jerk_e = 3, 3
+                machine_min_extruding_rate = 0, 0
+                machine_min_travel_rate = 0, 0
+            
+        # Extruder 1 2 3 4 5 6
+            ## Size
+                nozzle_diameter = 0.4
+            ## Preview
+                extruder_colour = #9BE198
+            ## Layer height limits
+                min_layer_height = 0.08
+                max_layer_height = 0.32
+            ## Position (for multi-extruder printers)
+                extruder_offset = 0x0
+            ## Retraction
+                retract_length = 3
                 retract_lift = 0
                 retract_lift_above = 0
                 retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
                 retract_speed = 60
-single_extruder_multi_material = 0
-thumbnails = 64x64,256x256
-thumbnails_format = JPG
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
+                deretract_speed = 0
+                retract_restart_extra = 0
+                retract_before_travel = 0.8
+                retract_layer_change = 1
                 wipe = 0
-z_offset = 0
+                retract_before_wipe = 0%
+            ## Retraction when tool is disabled (advanced settings for multi-extruder setups)
+                retract_length_toolchange = 4
+                retract_restart_extra_toolchange = 0
+            
+        # Notes
+                printer_notes = Base printer notes is EMPTY!
+                default_print_profile = 
                 default_filament_profile = Generic PLA+ @ANKER
-start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\nM420 S1; restore saved Auto Bed Leveling data\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)
-end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
+
+                printer_technology = FFF
+                printer_settings_id = 
+
 
 [printer:*M5*]
     inherits = *common*
@@ -354,8 +1053,24 @@ retract_speed = 60
     deretract_speed = 60
     retract_before_travel = 3
     retract_before_wipe = 0%
-printer_notes = Don not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANKERMAKE\nPRINTER_MODEL_M5
 
+    printer_notes = MACHINE_M5_\n PRINTER_VENDOR_ANKERMAKE\n PRINTER_MODEL_M5\n
+
+;printer_notes = Don not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANKERMAKE\nPRINTER_MODEL_M5
+[printer:*M5C*]
+    inherits = *common*
+    bed_shape = 0x0,220x0,220x220,0x220
+    max_print_height = 250
+    printer_model = M5C
+    retract_length = 0.8
+    retract_speed = 60
+    deretract_speed = 60
+    retract_before_travel = 3
+    retract_before_wipe = 0%
+    wipe = 1
+
+    ;printer_notes = PRINTER_VENDOR_ANKERMAKE\n PRINTER_MODEL_M5C\n
+    printer_notes = MACHINE_M5C_\n PRINTER_VENDOR_ANKERMAKE\n P_PRECISION P_NORMAL P_FAST\n
 [printer:AnkerMake M5 (0.4 mm nozzle)]
     inherits = *M5*
     nozzle_diameter = 0.4
@@ -364,3 +1079,11 @@ min_layer_height = 0.08
     max_layer_height = 0.32
     retract_lift_above = 0
     default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
+[printer:AnkerMake M5C (0.4 mm nozzle)]
+    inherits = *M5C*
+    nozzle_diameter = 0.4
+    printer_variant = 0.4
+    min_layer_height = 0.08
+    max_layer_height = 0.32
+    retract_lift_above = 0
+    default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER