mirror of
https://git.mirrors.martin98.com/https://github.com/prusa3d/PrusaSlicer.git
synced 2025-07-31 17:22:11 +08:00
update end gcode
This commit is contained in:
dylan
parent
09481c7d2d
commit
eda688bf18
@ -1,5 +1,5 @@
|
||||
# Author: https://github.com/macdylan
|
||||
# Update: 2023/11/30
|
||||
# Update: 2023/12/05
|
||||
[vendor]
|
||||
name = Snapmaker
|
||||
config_version = 1.1.0
|
||||
@ -348,7 +348,7 @@ output_filename_format = {input_filename_base}_{layer_height}mm_{print_time}_J1.
|
||||
|
||||
[print:0.06 Standard @Snapmaker (0.2 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
layer_height = 0.06
|
||||
ironing_speed = 30
|
||||
travel_speed = 110
|
||||
@ -408,7 +408,7 @@ overhang_speed_2 = 10
|
||||
|
||||
[print:0.08 Extra Fine @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
elefant_foot_compensation = 0.15
|
||||
layer_height = 0.08
|
||||
initial_layer_infill_speed = 65
|
||||
@ -456,7 +456,7 @@ support_material_threshold = 15
|
||||
|
||||
[print:0.10 Standard @Snapmaker (0.2 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
layer_height = 0.1
|
||||
initial_layer_infill_speed = 70
|
||||
ironing_speed = 30
|
||||
@ -519,7 +519,7 @@ overhang_speed_2 = 10
|
||||
|
||||
[print:0.12 Fine @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
layer_height = 0.12
|
||||
elefant_foot_compensation = 0.15
|
||||
initial_layer_infill_speed = 65
|
||||
@ -566,7 +566,7 @@ support_material_threshold = 20
|
||||
|
||||
[print:0.14 Standard @Snapmaker (0.2 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
layer_height = 0.14
|
||||
initial_layer_infill_speed = 70
|
||||
ironing_speed = 30
|
||||
@ -627,7 +627,7 @@ overhang_speed_2 = 10
|
||||
|
||||
[print:0.16 Optimal @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
layer_height = 0.16
|
||||
elefant_foot_compensation = 0.15
|
||||
initial_layer_infill_speed = 65
|
||||
@ -673,7 +673,7 @@ support_material_threshold = 25
|
||||
|
||||
[print:0.18 Standard @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.18
|
||||
initial_layer_infill_speed = 55
|
||||
ironing_speed = 30
|
||||
@ -731,7 +731,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.20 Standard @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
elefant_foot_compensation = 0.15
|
||||
initial_layer_infill_speed = 60
|
||||
ironing_speed = 30
|
||||
@ -767,7 +767,7 @@ overhang_speed_2 = 10
|
||||
|
||||
[print:0.20 Strength @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
elefant_foot_compensation = 0.15
|
||||
initial_layer_infill_speed = 65
|
||||
infill_wall_overlap = 25%
|
||||
@ -809,7 +809,7 @@ overhang_speed_2 = 10
|
||||
|
||||
[print:0.24 Draft @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
layer_height = 0.24
|
||||
elefant_foot_compensation = 0.15
|
||||
initial_layer_infill_speed = 65
|
||||
@ -901,7 +901,7 @@ output_filename_format = J1Benchy_{print_time}.gcode
|
||||
|
||||
[print:0.24 Standard @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.24
|
||||
initial_layer_infill_speed = 55
|
||||
ironing_speed = 30
|
||||
@ -957,7 +957,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.24 Standard @Snapmaker (0.8 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
layer_height = 0.24
|
||||
top_surface_pattern = monotonic
|
||||
initial_layer_infill_speed = 55
|
||||
@ -1019,7 +1019,7 @@ overhang_speed_3 = 5
|
||||
|
||||
[print:0.28 Extra Draft @Snapmaker (0.4 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
|
||||
layer_height = 0.28
|
||||
elefant_foot_compensation = 0.15
|
||||
initial_layer_infill_speed = 65
|
||||
@ -1062,7 +1062,7 @@ support_material_threshold = 40
|
||||
|
||||
[print:0.30 Standard @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.3
|
||||
bridge_speed = 30
|
||||
initial_layer_infill_speed = 55
|
||||
@ -1118,7 +1118,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.30 Strength @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.3
|
||||
bridge_speed = 30
|
||||
initial_layer_infill_speed = 55
|
||||
@ -1178,7 +1178,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.32 Standard @Snapmaker (0.8 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
layer_height = 0.32
|
||||
bridge_speed = 30
|
||||
top_surface_pattern = monotonic
|
||||
@ -1240,7 +1240,7 @@ overhang_speed_3 = 5
|
||||
|
||||
[print:0.34 Standard @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.34
|
||||
bridge_speed = 30
|
||||
top_surface_pattern = monotonic
|
||||
@ -1301,7 +1301,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.36 Standard @Snapmaker (0.8 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
layer_height = 0.36
|
||||
bridge_speed = 30
|
||||
top_surface_pattern = monotonic
|
||||
@ -1363,7 +1363,7 @@ overhang_speed_3 = 5
|
||||
|
||||
[print:0.38 Standard @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.38
|
||||
bridge_speed = 30
|
||||
top_surface_pattern = monotonic
|
||||
@ -1423,7 +1423,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.40 Standard @Snapmaker (0.8 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
layer_height = 0.4
|
||||
bridge_speed = 30
|
||||
top_surface_pattern = monotonic
|
||||
@ -1483,7 +1483,7 @@ overhang_speed_3 = 5
|
||||
|
||||
[print:0.42 Draft @Snapmaker (0.6 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
|
||||
layer_height = 0.42
|
||||
bridge_speed = 30
|
||||
initial_layer_infill_speed = 55
|
||||
@ -1541,7 +1541,7 @@ overhang_speed_1 = 50
|
||||
|
||||
[print:0.48 Draft @Snapmaker (0.8 nozzle)]
|
||||
inherits = *fdm_process_common*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
|
||||
layer_height = 0.48
|
||||
bridge_speed = 30
|
||||
top_surface_pattern = monotonic
|
||||
@ -1935,11 +1935,11 @@ inherits = *fdm_filament_abs*
|
||||
|
||||
[filament:Snapmaker ABS]
|
||||
inherits = *Snapmaker ABS @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker ABS @0.2 nozzle]
|
||||
inherits = *Snapmaker ABS @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 2
|
||||
|
||||
[filament:*Snapmaker ASA @base*]
|
||||
@ -1947,11 +1947,11 @@ inherits = *fdm_filament_asa*
|
||||
|
||||
[filament:Snapmaker ASA]
|
||||
inherits = *Snapmaker ASA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker ASA @0.2 nozzle]
|
||||
inherits = *Snapmaker ASA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 2
|
||||
|
||||
[filament:*Snapmaker PA-CF @base*]
|
||||
@ -1959,18 +1959,18 @@ inherits = *fdm_filament_pa*
|
||||
|
||||
[filament:Snapmaker PA-CF]
|
||||
inherits = *Snapmaker PA-CF @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker PETG @base*]
|
||||
inherits = *fdm_filament_petg*
|
||||
|
||||
[filament:Snapmaker PETG]
|
||||
inherits = *Snapmaker PETG @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker PETG @0.2 nozzle]
|
||||
inherits = *Snapmaker PETG @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 1
|
||||
|
||||
[filament:*Snapmaker PET @base*]
|
||||
@ -1978,11 +1978,11 @@ inherits = *fdm_filament_pet*
|
||||
|
||||
[filament:Snapmaker PET]
|
||||
inherits = *Snapmaker PET @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker PET @Dual]
|
||||
inherits = *Snapmaker PET @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
min_fan_speed = 20
|
||||
max_fan_speed = 55
|
||||
bridge_fan_speed = 40
|
||||
@ -2006,21 +2006,21 @@ filament_colour = #3D3C39
|
||||
|
||||
[filament:Snapmaker PETG-CF]
|
||||
inherits = *Snapmaker PETG-CF @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker PLA Eco @base*]
|
||||
inherits = *fdm_filament_pla_eco*
|
||||
|
||||
[filament:Snapmaker PLA Eco]
|
||||
inherits = *Snapmaker PLA Eco @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker PLA @base*]
|
||||
inherits = *fdm_filament_pla*
|
||||
|
||||
[filament:Snapmaker PLA]
|
||||
inherits = *Snapmaker PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker PLA-CF @base*]
|
||||
inherits = *fdm_filament_pla*
|
||||
@ -2034,7 +2034,7 @@ filament_colour = #3D3C39
|
||||
|
||||
[filament:Snapmaker PLA-CF]
|
||||
inherits = *Snapmaker PLA-CF @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker PLA Silk @base*]
|
||||
inherits = *fdm_filament_pla*
|
||||
@ -2046,11 +2046,11 @@ filament_colour = #CF942B
|
||||
|
||||
[filament:Snapmaker PLA Silk]
|
||||
inherits = *Snapmaker PLA Silk @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker PLA Silk @0.2 nozzle]
|
||||
inherits = *Snapmaker PLA Silk @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 2
|
||||
|
||||
[filament:*PolyLite PLA @base*]
|
||||
@ -2062,11 +2062,11 @@ filament_colour = #8269AC
|
||||
|
||||
[filament:PolyLite PLA]
|
||||
inherits = *PolyLite PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:PolyLite PLA @0.2 nozzle]
|
||||
inherits = *PolyLite PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 1
|
||||
|
||||
[filament:*PolyTerra PLA @base*]
|
||||
@ -2078,11 +2078,11 @@ filament_colour = #73CEC8
|
||||
|
||||
[filament:PolyTerra PLA]
|
||||
inherits = *PolyTerra PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:PolyTerra PLA @0.2 nozzle]
|
||||
inherits = *PolyTerra PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 1
|
||||
|
||||
[filament:*Snapmaker PVA @base*]
|
||||
@ -2090,11 +2090,11 @@ inherits = *fdm_filament_pva*
|
||||
|
||||
[filament:Snapmaker PVA]
|
||||
inherits = *Snapmaker PVA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker PVA @0.2 nozzle]
|
||||
inherits = *Snapmaker PVA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
|
||||
filament_max_volumetric_speed = 1.2
|
||||
|
||||
[filament:*Snapmaker TPU @base*]
|
||||
@ -2102,11 +2102,11 @@ inherits = *fdm_filament_tpu*
|
||||
|
||||
[filament:Snapmaker TPU]
|
||||
inherits = *Snapmaker TPU @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker TPE]
|
||||
inherits = *Snapmaker TPU @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 7.2
|
||||
filament_notes = "eSUN eLastic TPE-83A\n"
|
||||
@ -2147,7 +2147,7 @@ bridge_fan_speed = 20
|
||||
|
||||
[filament:Snapmaker J1 ASA]
|
||||
inherits = *Snapmaker J1 ASA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker J1 ASA @0.2 nozzle]
|
||||
inherits = *Snapmaker J1 ASA @base*
|
||||
@ -2162,7 +2162,7 @@ extrusion_multiplier = 0.96
|
||||
|
||||
[filament:Snapmaker J1 PA-CF]
|
||||
inherits = *Snapmaker J1 PA-CF @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker J1 PETG @base*]
|
||||
inherits = *fdm_filament_petg*
|
||||
@ -2200,7 +2200,7 @@ min_print_speed = 35
|
||||
|
||||
[filament:Snapmaker J1 PET]
|
||||
inherits = *Snapmaker J1 PET @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker J1 PETG-CF @base*]
|
||||
inherits = *fdm_filament_petg*
|
||||
@ -2223,7 +2223,7 @@ filament_colour = #3D3C39
|
||||
|
||||
[filament:Snapmaker J1 PETG-CF]
|
||||
inherits = *Snapmaker J1 PETG-CF @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker J1 PLA Eco @base*]
|
||||
inherits = *fdm_filament_pla_eco*
|
||||
@ -2251,7 +2251,7 @@ filament_retract_length = nil
|
||||
|
||||
[filament:Snapmaker J1 PLA]
|
||||
inherits = *Snapmaker J1 PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:*Snapmaker J1 PLA Matte @base*]
|
||||
inherits = *fdm_filament_pla*
|
||||
@ -2285,7 +2285,7 @@ filament_colour = #767A7E
|
||||
|
||||
[filament:Snapmaker J1 PLA Metal]
|
||||
inherits = *Snapmaker J1 PLA Metal @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker J1 PLA Metal @0.2 nozzle]
|
||||
inherits = *Snapmaker J1 PLA Metal @base*
|
||||
@ -2327,7 +2327,7 @@ filament_colour = #CF942B
|
||||
|
||||
[filament:Snapmaker J1 PLA Silk]
|
||||
inherits = *Snapmaker J1 PLA Silk @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker J1 PLA Silk @0.2 nozzle]
|
||||
inherits = *Snapmaker J1 PLA Silk @base*
|
||||
@ -2336,7 +2336,7 @@ filament_max_volumetric_speed = 2
|
||||
|
||||
[filament:PolyLite J1 PLA]
|
||||
inherits = *PolyLite PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:PolyLite J1 PLA @0.2 nozzle]
|
||||
inherits = PolyLite PLA @0.2 nozzle
|
||||
@ -2344,7 +2344,7 @@ compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diam
|
||||
|
||||
[filament:PolyTerra J1 PLA]
|
||||
inherits = *PolyTerra PLA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:PolyTerra J1 PLA @0.2 nozzle]
|
||||
inherits = PolyTerra PLA @0.2 nozzle
|
||||
@ -2356,7 +2356,7 @@ slowdown_below_layer_time = 8
|
||||
|
||||
[filament:Snapmaker J1 PVA]
|
||||
inherits = *Snapmaker J1 PVA @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker J1 PVA @0.2 nozzle]
|
||||
inherits = *Snapmaker J1 PVA @base*
|
||||
@ -2370,11 +2370,11 @@ inherits = *fdm_filament_tpu*
|
||||
|
||||
[filament:Snapmaker J1 TPU]
|
||||
inherits = *Snapmaker J1 TPU @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
|
||||
[filament:Snapmaker J1 TPU High-Flow]
|
||||
inherits = *Snapmaker J1 TPU @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
filament_max_volumetric_speed = 7.6
|
||||
filament_notes = "!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n"
|
||||
filament_retract_length = 0.8
|
||||
@ -2384,7 +2384,7 @@ extrusion_multiplier = 0.983
|
||||
|
||||
[filament:Snapmaker J1 TPE]
|
||||
inherits = *Snapmaker J1 TPU @base*
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
|
||||
compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4")
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 7.2
|
||||
filament_notes = "eSUN eLastic TPE-83A\n"
|
||||
@ -2489,7 +2489,7 @@ thumbnails = 300x300
|
||||
extruder_offset = 0x0,0x0
|
||||
default_filament_profile = Snapmaker J1 PLA,Snapmaker J1 PETG
|
||||
start_gcode = ; Model: Snapmaker J1 ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM205 V20 ;Junction Deviation (mm)\n\n{if physical_printer_preset =~/.*IDEXDupl.*/ || physical_printer_preset =~/.*IDEXCopy.*/ }\n M605 S2 X162 R0 ;IDEX Duplication\n{elsif physical_printer_preset =~/.*IDEXMirr.*/}\n M605 S3 ;IDEX Mirror\n{elsif physical_printer_preset =~/.*IDEXBack.*/}\n M605 S4 ;IDEX Backup\n{endif}\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\n\nG0 Z100.0\n{if is_extruder_used[0]}\n T0\n G0 X{if 0 == 0}80{else}240{endif} Y0 F7980.0\n {endif}\n{if is_extruder_used[1]}\n T1\n G0 X{if 1 == 0}80{else}240{endif} Y0 F7980.0\n {endif}\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n{if 1==1}; LED\n M355 S1 P64\n G4 P100\n M355 S1 P128\n G4 P100\n M355 S1 P64\n G4 P200\n M355 S1 P255\n G4 P100\n{endif}\nG28 X Y\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n T0\nG0 Z20 F240.0\nG0 X{if 0 == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\nM104 S{first_layer_temperature[0] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{first_layer_temperature[0]} C3 W1\nG1 X{if 0 == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if 0 == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n T1\nG0 Z20 F240.0\nG0 X{if 1 == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\nM104 S{first_layer_temperature[1] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{first_layer_temperature[1]} C3 W1\nG1 X{if 1 == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if 1 == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F240.0\nG0 X{if initial_extruder == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
|
||||
end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-40 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-40 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
toolchange_gcode = ;***** Update: 20230730\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM2000 S200 V[travel_speed] A[travel_acceleration] ;quick switch extruders, S:200 mode/V:speed/A:acceleration\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\n\n{if layer_z <= (first_layer_height + 0.001)}\n M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
|
||||
before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
|
||||
bed_shape = 0x0,324x0,324x200,0x200
|
||||
@ -2506,7 +2506,7 @@ inherits = *fdm_linear2*
|
||||
name = *fdm_a250*
|
||||
printer_notes = PRINTER_MODEL_SNAPMAKER_A250\n
|
||||
start_gcode = ; Model: Snapmaker A250\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z156 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
|
||||
end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
|
||||
bed_shape = 0x0,230x0,230x250,0x250
|
||||
max_print_height = 235
|
||||
@ -2516,7 +2516,7 @@ inherits = *fdm_linear2*
|
||||
name = *fdm_a350*
|
||||
printer_notes = PRINTER_MODEL_SNAPMAKER_A350\n
|
||||
start_gcode = ; Model: Snapmaker A350\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z220 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
|
||||
end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
|
||||
bed_shape = 0x0,320x0,320x350,0x350
|
||||
max_print_height = 330
|
||||
@ -2526,7 +2526,7 @@ inherits = *fdm_linear2_dual*
|
||||
name = *fdm_a250_dual*
|
||||
printer_notes = PRINTER_MODEL_SNAPMAKER_A250_DUAL\n
|
||||
start_gcode = ; Model: Snapmaker A250 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z136 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\nM104 S{first_layer_temperature[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}220{endif} F3420.0\nG0 X{if 0 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[0]} C3 W1\nG1 X{if 0 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\nM104 S{first_layer_temperature[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}220{endif} F3420.0\nG0 X{if 1 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[1]} C3 W1\nG1 X{if 1 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
|
||||
end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
toolchange_gcode = ;***** Update: 20231010\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\n\n{if layer_z <= (first_layer_height + 0.001)}\n M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
|
||||
before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
|
||||
bed_shape = 0x0,230x0,230x250,0x250
|
||||
@ -2537,7 +2537,7 @@ inherits = *fdm_linear2_dual*
|
||||
name = *fdm_a350_dual*
|
||||
printer_notes = PRINTER_MODEL_SNAPMAKER_A350_DUAL\n
|
||||
start_gcode = ; Model: Snapmaker A350 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z193 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\nM104 S{first_layer_temperature[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}310{endif} F3420.0\nG0 X{if 0 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[0]} C3 W1\nG1 X{if 0 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\nM104 S{first_layer_temperature[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}310{endif} F3420.0\nG0 X{if 1 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[1]} C3 W1\nG1 X{if 1 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
|
||||
end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
||||
toolchange_gcode = ;***** Update: 20231010\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\n\n{if layer_z <= (first_layer_height + 0.001)}\n M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
|
||||
before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
|
||||
bed_shape = 0x0,320x0,320x350,0x350
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user