This fixed duplicity M106, which doesn't have any effect.
Also, it was implemented hysteresis that filters out small back-and-forth changes in fan speeds.
* 1. Remove all global include_directories.
* 2. Move 3d party dependencies from src to budled deps if possible.
* Unify and enforce one way of including headers:
e.g. #include "libslic3r/GCode.hpp" vs #include "GCode.hpp"
(always use the "libslic3r/GCode.hpp" option).
* Make all dependencies (also header only) a cmake target.
WIP GCode/SmoothPath.cpp,hpp cache for interpolating extrusion path with arches.
Removed Perl test t/geometry.t, replaced with C++ tests.
Refactored ExtrusionEntity and derived classes to hold extrusion attributes in new ExtrusionFlow/ExtrusionAttributes classes.
Reworked path ordering in G-code export to never copy polylines, but to work with a new "flipped" attribute.
Reworked G-code export to interpolate extrusion paths with smooth paths and to extrude those smooth paths.
New parameters: arc_fitting, arc_fitting_tolerance
Renamed GCode class to GCodeGenerator
Moved GCodeWriter.cpp/hpp to GCode/
Moved Wipe from from GCode.cpp,hpp to GCode/Wipe.cpp,hpp
Moved WipeTowerIntegration from GCode.cpp,hpp to GCode/WipeTowerIntegration.cpp,hpp
New variant of douglas_peucker() to simplify range of iterators in place.
Refactored wipe in general and wipe on perimeters / hiding seams.
WIP: Convert estimate_speed_from_extrusion_quality() and its application to smooth paths.
WIP: Cooling buffer to process G2G3, disable arc fitting for filters that cannot process it.
This fixes CoolingBuffer behavior wrt. 2.5.0 in cases where custom G-Codes contained
lines starting with "T". Those were previously considered as valid toolchanges.
In 2.6.0-alpha3, this scenario led to a hard crash: #9470, #9550
did not change compared to the preceding value creating empty "G1" lines.
The empty "G1" lines are now removed.
Improves Features fail with extra G1 moves when above a certain layer height and Detect Thin Walls is enabled #5176
Improves Thin wall detection causes miniature loops to be added, and emits empty G1 commands #3058
WIP to G-code export parallelization through pipelining:
Decoupled CoolingBuffer from GCode / GCodeWriter, ready to be
pipelined on a different thread.
1) Using boost::preprocessor to reduce code duplicities when defining
new configuration values.
2) Implemented static hash() and operator== on StaticPrintConfig derived
classes to support hash tables of instances thereof.
the code more readable and to highlight where PrintObject::region_volumes
are actually set and consumed.
2) Replaced Slic3r::clamp() with std::clamp(). They differ in the order
of their parameters, thus hopefully no new bugs were introduced.
3) Some refactoring of MultiMaterialSegmentation for efficiency.
Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
This can happen if the user enters invalid toolchange through the custom gcodes
Such toolchange is now simply ignored by the CoolingBuffer, exporting gcode is NOT stopped, a log error is emitted
from the current Model/ModelObjects.
Fixed a possible race condition in updating Print::m_placeholder_parser
with the proposed filename / filename base.
Improved documentation (source code comments).
