the amount of total extruded material and per extruder extruded material
up to the point the value is evaluated:
"extruded_volume", "extruded_weight",
"extruded_volume_total", "extruded_weight_total"
Newly each custom G-code block may exchange the following values with slicer:
Position and Z-hop:
position (read/write)- 3 element vector (X, Y, Z) of current G-code position. Z element contains the current Z hop.
zhop (read only)- initial zhop value
Extruders: vector variables, one element per extruder:
e_position (read/write) - absolute E position, only available with absolute extruder addressing
e_retracted (read/write) - current retraction state
e_restart_extra (read/write) - current planned extra deretraction when starting printing
For readibility, script's if / elsif / else / endif syntax was modified:
{if cond then
block
elsif cond then
block
else
block
endif}
Semicolon is not required after else or endif.
Implements #4048#7196
Syntax:
(global|local) variable_name =
(scalar_expression|vector_variable|array_expr|initializer_list)
array_expr := array(repeat, value)
initializer_list := (value, value, value, ...)
The type of the newly created variable is defined by the type
of the right hand side intitializer.
Newly declared variable must not override an existing variable.
Variable may be assigned with global|local expression, but its type
must not be changed.
Newly the assignment operator also accepts the same right hand expressions
as the global|local variable definition.
Should fix the following issues: #9594, #9485, #9563, #9588, #9610
Also fixed a problem with zero speed when dynamic speed was percentage based and speeds were set to 0 (auto)
- remove the infinite skirt
- added 'idle_temperature' in Filament Settings as an optional parameter
- the logic is changed: if idle_temp is present, it is used,
otherwise it uses the old delta value from Print Settings
- TODO: the optional parameter is not well supported in UI
this removes duplicated code and fixes toolchange retraction
The ooze prevention part needs further work, now it does not
work as advertised (the tall skirt)
Moved is_xx() test functions to ExtrusionRole enum class,
changed the tests to use the new ExtrusionRole bitmask.
Follow-up to 5991850db1f2d09d1b7713f42300e2bfe4a42128
e50e96bb26eab4f9d56c98706c03166635cf4fff
c64dbacf88c617e3d676bdaa6c8c81317ccaee5d
Co-authored-by: supermerill <merill@free.fr>
Based on the unfinished idea of @supermerill, defining ExtrusionRole
as a bit mask of ExtrusionRoleModifier.
Because the ExtrusionRole was used for both ExtrusionEntity and
G-code export / G-code viewer, the original ExtrusionRole had to be split
to ExtrusionRole and GCodeExtrusionRole to support bitmask attributes
for the former while keeing a low number of ordinary values for the latter.
with canceled / invalidated states.
Print / PrintObject infrastructure was extended with a cleanup()
callback, which may check for the new State::Canceled / State::Invalid
states of a particular milestone and turn it to State::Fresh
while releasing data of that particular milestone which is no more valid.
Also fixed a bug in 31fbfa56de70bf8093cea5fe56c73b0e6fa017c3
where the PrintObject shared data invalidation condition was flipped.
