GitHub-Proxy/PrusaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/prusa3d/PrusaSlicer.git synced 2025-08-04 05:10:37 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
4,315 Commits 131 Branches 318 Tags
Commit Graph

248 Commits

Author SHA1 Message Date
Alessandro Ranellucci
69d169165e Make sure infill_only_where_needed has no effect when fill_density = 0%. No need to require it to be explicitely turned off for spiral_vase, since it's disabled anyway. #3386 #3126 2017-03-17 19:17:24 +01:00
Alessandro Ranellucci
a1c7b65741 Moved threads option from print settings to application preferences 2017-03-17 16:41:34 +01:00
Alessandro Ranellucci
b50417cb20 Cosmetic improvements 2017-03-17 16:03:58 +01:00
Alessandro Ranellucci
53fee67489 New experimental option z_steps_per_mm. #1827 2017-03-14 16:46:11 +01:00
Alessandro Ranellucci
4b4a0c8a5c Split external_fill_pattern into top_infill_pattern and bottom_infill_pattern. Retrocompatibile change. #945 2017-03-12 13:01:14 +01:00
Alessandro Ranellucci
a193297b20 Align speed and extrusion width fields 2017-03-12 00:51:52 +01:00
Alessandro Ranellucci
7b914d17f3 Merge pull request #3588 from lordofhyphens/filament-gcode 
Filament-specific start and end gcode.
 2017-03-12 00:35:16 +01:00
Alessandro Ranellucci
f670ad6821 New Interior Brim option. #2026 2017-03-12 00:31:15 +01:00
Joseph Lenox
a2fb7313c6 Configurable overhang threshold as function of perimeter width (#3752) 
* Fix automatic overhang threshold

We should be supporting perimeters that are overhung further than half a
perimeter out, rather than two times the perimeter width.

Fixes: #2068

* Made the overhang detection configurable, up to 200 (the original value, which is still the default)

* Set default to 60% as per https://github.com/alexrj/Slic3r/wiki/Support:-Requirements
Removed some less useful enumerations (0-30%)

* Folded in auto_threshold into support threshold as a % value
 2017-03-11 17:22:06 -06:00
Joseph Lenox
0741ecc2aa Add weight/cost output to gcode. On the way to #647 (#3669) 
* Add weight/cost output to gcode. On the way to #647

* added total cost/weight to Extruder statistics, mocked up addendum to status bar change.

* Added second information box that populates after exporting gcode for sliced statistics.

* Changed filament density to use g/cm^3. Extended tooltip to indicate calculation methods.

* Hide sliced info box when gcode export hasn't been done.

* Remove if invalidated and we have background processing or the configuration changes.

* Called layout after every Hide/Show call to ensure that it is placed correctly on different platforms.
Changed output units to cm/cm^3

Conflicts:
	lib/Slic3r/GUI/Plater.pm
 2017-03-10 17:36:14 -06:00
Alessandro Ranellucci
782dda46a2 Refactoring, use the new OptionsGroup::append_button() instead of append_widget() 2017-03-09 21:35:17 +01:00
Alessandro Ranellucci
36e148929b More user-friendly inputs for speed and extrusion width options (explicit "auto" labels instead of having to write 0) 2017-03-05 03:20:39 +01:00
Alessandro Ranellucci
619bc4012d Allow to express gap_fill_speed as % over infill_speed 2017-03-05 02:13:00 +01:00
Alessandro Ranellucci
5470e89f7a Allow autospeed for gap fill. Now gap_fill_speed = 0 enabled autospeed (consistenly with other speed settings) and does not disable gap fill. A new fill_gaps option, defaulting to true, was added for this purpose. #2976 2017-03-05 01:53:57 +01:00
Alessandro Ranellucci
e901514212 New feature: brim connections 2016-12-18 15:21:27 +01:00
Alessandro Ranellucci
bec26c51af Merge branch 'feature-2700-has_heatbed' of https://github.com/lordofhyphens/Slic3r into lordofhyphens-feature-2700-has_heatbed 
Conflicts:
	t/gcode.t
 2016-12-17 00:41:45 +01:00
Alessandro Ranellucci
376df2e3f2 Minor GUI fix in the prompt for solid rectilinear infill. #3610 2016-12-15 11:50:58 +01:00
Joseph Lenox
19eea19d91 Filament-specific start and end gcode. GUI page copied from Printer settings. 2016-11-26 01:02:51 -06:00
bubnikv
4773987b0f Added "Notes" page to the filament configuration. 
Added "filament_max_volumetric_speed", a cap on the maximum volumetric
extrusion role, filament specific. This is very useful when mixing
rigid filament with a soft filament.

Extended the import / export of multi-string values into configuration
values, including the test cases. Multi-line strings will be enclosed
into quotes, quotes escaped using a C-style escape sequences. Single
word strings could still be stored without quotes.

Conflicts:

	xs/src/libslic3r/Config.hpp
 2016-11-24 15:58:06 +01:00
bubnikv
9f0523cb53 Documented the purpose of various perl modules. 
Conflicts:

	lib/Slic3r/GUI/3DScene.pm
	lib/Slic3r/GUI/Plater/2DToolpaths.pm
 2016-11-24 15:41:19 +01:00
bubnikv
9bcb467eb1 Moved the Bonjour discovery to Tab.pm, 
when no Bonjour devices found, a simple message box is shown.
Otherwise the Bonjour selection dialog with an empty list crashes on windows.
 2016-11-23 21:24:19 +01:00
Alessandro Ranellucci
74c6df028e Merge pull request #3576 from lordofhyphens/3571-auto-enable-bridgedetect 
New feature: Propose to enable "detect bridging perimeters"
 2016-11-22 18:58:07 +01:00
Alessandro Ranellucci
32ba66c48f Don't grey out the retract_speed option when using firmware retraction because it's still used by auto-speed pressure regulator. #3283 2016-11-22 18:47:19 +01:00
bubnikv
fded56c126 New feature: Propose to enable "detect bridging perimeters" 
when the supports are first enabled. Don't check keep asking,
if the user does not want the bridging perimeters to be enabled.
 2016-11-17 23:40:43 -06:00
Joseph Lenox
c5c1cab4f9 Adds new has_heatbed option to capabilities to disable autogeneration of bed temp settings. 2016-07-12 19:26:17 -05:00
Joseph Lenox
f56799e9d5 infill_only_where_needed is incompatible with spiral_vase, enforced. 
Also ensured that support is disabled if spiral_vase is on.
Added a secondary check to make sure that clip_fill_surfaces does not run if we're in spiral_vase.
 2016-06-29 19:30:21 -05:00
bubnikv
d8be976356 The "controller" tab and the settings of the USB/serial connection was 
made configurable. Now one may hide the "controller" tab and the USB/serial
connection configuration from the preferences. This is useful for someone,
who never connects his printer to the computer by a cable.
 2016-05-16 23:57:53 +02:00
Alessandro Ranellucci
f006e66549 Refactored calls to Wx::Bitmap->new 2016-04-09 19:10:57 +02:00
Alessandro Ranellucci
0964700e6d Merge pull request #3209 from hyperair/fix-3046 
Don't toggle support_material_enforce_layers field
 2016-03-13 18:30:22 +01:00
Alessandro Ranellucci
e72a89ec23 New icon for Infill (credits: Carlo Mariella) 2016-02-20 16:18:48 +01:00
Chow Loong Jin
a9c5874db3 Don't toggle support_material_enforce_layers field 
support_material_enforce_layers works independently of the support_material ||
raft options, so we should not disable the field when support material
generation is disabled.

Fixes: #3046
 2016-01-17 17:12:47 +08:00
Alessandro Ranellucci
f5326c393a Revert "Implement resizable left column in preset editor. #3151" 
This reverts commit 4b30d67e54dcc6ec1d4aff0c09370fde00c1e07f.
 2015-12-25 17:52:10 +01:00
Alessandro Ranellucci
4b30d67e54 Implement resizable left column in preset editor. #3151 2015-12-18 20:00:22 +01:00
Alessandro Ranellucci
8138fbf349 New --retract-lift-above and --retract-lift-below options. #763 #3057 2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
32a333f16a Import config bundle automatically if found in application directory 2015-12-07 12:17:06 +01:00
Alessandro Ranellucci
9f9b5afedb Merge branch 'master' into sender 2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
b8e95f40a6 Prompt user when setting wipe + use_firmware_retraction. #3056 2015-11-04 19:43:50 +01:00
Alessandro Ranellucci
9ee6829ebc Implemented connection timeout in C++ 2015-11-02 20:36:36 +01:00
Alessandro Ranellucci
b309c61de3 Test button for serial connection 2015-11-02 01:35:28 +01:00
Alessandro Ranellucci
9b21ac877a Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r.pm
	xs/MANIFEST
	xs/src/libslic3r/PrintConfig.hpp
 2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
56b993bb89 More fixes for Unicode filenames support on Windows and OS X 2015-06-02 16:10:15 +02:00
Alessandro Ranellucci
0a9f1c466a Minor improvements to filament choosers in the plater 2015-06-01 23:52:15 +02:00
Alessandro Ranellucci
c2c321c90b Restore the (modified) label in preset comboctrl 2015-06-01 23:34:04 +02:00
Alessandro Ranellucci
4402dfa6f3 Fix crash in GUI caused by recursive event calls. #2613 2015-06-01 23:11:27 +02:00
Alessandro Ranellucci
97c701cdac Fix concurrency issue in Wx when changing the number of extruders. #2863 2015-06-01 14:57:43 +02:00
Alessandro Ranellucci
7f70da97b4 New experimental autospeed feature. #2810 2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
6e280ab8cb Prompt user when using 100% infill with a pattern that does not support it 2015-05-28 18:56:35 +02:00
Alessandro Ranellucci
13b7316807 Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r/GUI/MainFrame.pm
 2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
aa8b6afe8b Assign color to filaments 2015-05-26 02:01:43 +02:00
Alessandro Ranellucci
d2172b4383 Merge branch 'master' into sender 2015-03-06 22:15:43 +01:00