WIP GCode/SmoothPath.cpp,hpp cache for interpolating extrusion path with arches.
Removed Perl test t/geometry.t, replaced with C++ tests.
Refactored ExtrusionEntity and derived classes to hold extrusion attributes in new ExtrusionFlow/ExtrusionAttributes classes.
Reworked path ordering in G-code export to never copy polylines, but to work with a new "flipped" attribute.
Reworked G-code export to interpolate extrusion paths with smooth paths and to extrude those smooth paths.
New parameters: arc_fitting, arc_fitting_tolerance
Renamed GCode class to GCodeGenerator
Moved GCodeWriter.cpp/hpp to GCode/
Moved Wipe from from GCode.cpp,hpp to GCode/Wipe.cpp,hpp
Moved WipeTowerIntegration from GCode.cpp,hpp to GCode/WipeTowerIntegration.cpp,hpp
New variant of douglas_peucker() to simplify range of iterators in place.
Refactored wipe in general and wipe on perimeters / hiding seams.
WIP: Convert estimate_speed_from_extrusion_quality() and its application to smooth paths.
WIP: Cooling buffer to process G2G3, disable arc fitting for filters that cannot process it.
of Layer->LayerSlice->LayerIsland hierarchy. This should improve
tool path ordering of multiple parts within the same object #5511.
Some shells tests rewritten from Perl to C++.
FIXME: Gap fill extrusions are currently not handled by the initial
G-code preview!
in t/perimeters.t, see the comment
FIXME skip the 1st layer in the test 'loops start on concave point if any'
The failure is due to the seam smoothing, which brings the seam too far
away from the external perimeter at the 1st layer, which uses significantly
wider extrusion rate than the other layers. Moving the seam point from
the external perimeter causes an error when projecting the seam point
back to the external perimeter, where the projection lands not exactly
at a corner point, creating a short segment at the end of a polygon loop.
provided for Perl bindings and their semantic was confusing.
Implemented free function angle() to measure angle between two vectors.
Reworked Polygon::convex/concave_points(), changed the meaning of their
angle threshold parameter.
Removed some unused methods from Perl bindings and tests.
Reworked the "wipe inside at the external perimeter" function
after Point::ccw_angle() was removed.
WIP to G-code export parallelization through pipelining:
Decoupled CoolingBuffer from GCode / GCodeWriter, ready to be
pipelined on a different thread.
There was a bug in unit tests that led to generating the wipe tower with non-normalized preset.
This caused out-of-bounds access into max_layer_height vector in fill_wipe_tower_partitions.
The problem surfaced in https://github.com/prusa3d/PrusaSlicer/issues/2288.
I quickly patched additional normalization of the preset to prevent this from happening.
Also, an assert in the same function turned out to trip on one of the tests.
This one was commented out for now and will (hopefully) be looked into later.
Function Print::apply_config was renamed to apply_config_perl_tests_only so everyone
sees its current purpose and does not mistake it for the more important Print::apply.
