That allows computed better values in cases when the extrusion width of the first layer or for the infill differs from the extrusion width for perimeters.
Parameters min_feature_size and wall_transition_length now can be set in percentages, and then they will be calculated based on nozzle size. Old profiles with default values are forced to replace old default values with new default values in percentages.
Fuzzy skin will be disabled for regions with
with fuzzy_skin_point_dist < 0.01 or fuzzy_skin_thickness.value < 0.001
as the first one creates excessive long extrusions while the second
one does not modify the perimeters.
With solid_infill_every_layers = 1 the new solid layer should be solid
infill not solid bridging infill. Once the layer is correctly classified
as solid with solid_infill_every_layers = 1, everything works as expected.
For this particular model, ClipperLib numerical instability causes
one of the internal surfaces to turn into bridging surfaces
on reslicing. The issue was fixed by reverting to untyped slices if possible.
When propagating overhangs to be supported, the regions are newly
properly merged and regularized.
Fix of Stuck at "preparing infill" with "only infill where needed" enabled 1.41.2 #1696
"Only infill where needed" makes slicer crash for some models #6385
[BUG] Slicing stuck for 14h now, 0.8 NZL Ender 5+ Gyroid infill only where need
support blockers / enforcers.
All slicing functions shall produce consistent results with the same mesh, same transformation matrix and slicing parameters.
Namely, slice_mesh_slabs() shall produce consistent results with slice_mesh() and slice_mesh_ex() in the sense, that projections made by
slice_mesh_slabs() shall fall onto slicing planes produced by slice_mesh().
Before this commit, slice_mesh_slabs() projected bottom facing faces upwards to its coplanar slicing plane,
which is different from how slice_mesh() or slice_mesh_ex() work, leading to ignored support enforcer / blocker strokes.
flip direction of the infill layer with each interface layer.
Unfortunately the flipping of support interface directions may not work
reliably due to base support layer heights growing at different rate
from the interface layers.
for offset2() with clear meaning.
New ClipperUtils functions: expand(), shrink() as an alternative
for offset() with clear meaning.
All offset values for the new functions are positive.
Various offsetting ClipperUtils (offset, offset2, offset2_ex) working
over Polygons were marked as unsafe, sometimes producing invalid output
if called for more than one polygon. These functions were reworked
to offset polygons one by one. The new functions working over Polygons
shall work the same way as the old safe ones working over ExPolygons,
but working with Polygons shall be computationally more efficient.
Improvements in FDM support generator:
1) For both grid and snug supports: Don't filter out supports for which
the contacts are completely reduced by support / object XY separation.
2) Rounding / merging of supports using the closing radius parameter is
now smoother, it does not produce sharp corners.
3) Snug supports: When calculating support interfaces, expand the projected
support contact areas to produce wider, printable and more stable interfaces.
4) Don't reduce support interfaces for snug supports for steep overhangs,
that would normally not need them. Snug supports often produce very
narrow support interface regions and turning them off makes the support
interfaces disappear.
This is a regression to a late PrusaSlicer 2.4.0-alpha0 change
8dfc0422a878c5e44d4233c6ce522c77a0c3280f
Faster and hopefully more reliable projection of paint-on support
blockers and enforcers on a sliced mesh.
Previous d89f01c71795e324f510939e2cece05b9586291c did not fix it.
This is a regression to a late PrusaSlicer 2.4.0-alpha0 change
8dfc0422a878c5e44d4233c6ce522c77a0c3280f
Faster and hopefully more reliable projection of paint-on support
blockers and enforcers on a sliced mesh.
1) Changed the name of the variable "brim_offset" to "brim_separation"
for clarity.
2) Added legacy conversion after loading an old 3MF that does not define
then new "brim_separation" variable: The "brim_separation" is being
filled in with the "elefant_foot_compensation" value to produce
equal brim separation to the old PrusaSlicer that saved that 3MF file.
Filtering of unprintable regions in multi-material segmentation depends on if gap-fill is enabled or not. So sliced object is invalidated when gap-fill was enabled/disabled by option "gap_fill_enabled" or by changing "gap_fill_speed" to force recomputation of the multi-material segmentation.
Quite some time ago, many of the TBB components were deprecated in favor
of their near-equivalents in the STL or, in the case of task_scheduler_init,
were broken up and reconstituted under a less ad-hoc logic. Every time a header
file marked deprecated gets included, a rather loud warning is emitted, which
leads to a complete TBB's domination over the stderr stream during build time,
making it harder to notice _legitimate_ warnings.
Instead of merely muting the output with TBB_SUPPRESS_DEPRECATED_MESSAGES,
perform a genuine migration away from the deprecated components with the added
benefit of achieving a source compatibility with oneTBB, the successor to TBB
which has dropped the deprecated API for good.
What got replaced for what?
| Deprecated | Replacement |
| ------------------------------------- | --------------------------------------------- |
| `tbb::atomic` | `std::atomic` |
| `tbb::mutex` | `std::mutex` |
| `tbb::mutex::scoped_lock` | `std::scoped_lock<std::mutex>` |
| `tbb::mutex::scoped_lock` (empty) | `std::unique_lock<std::mutex>` (deferred) |
| `tbb::task_scheduler_init` | `tbb::global_control` |
| `tbb::this_thread` | `std::this_thread` |
Signed-off-by: Roman Beranek <roman.beranek@prusa3d.com>
Fixing model import of models with nearly degenerate triangles, which
degenerate after transformation (translation or rotation).
There was certainly a bug in PrusaSlicer, however this bug was triggered
mostly by the ASCII STL files generated by OpenSCAD, likely due to insufficient
number of decimal digits when saving an ASCII STL, see
[openscad/openscad] STL export should contain single precision floats (#2651)
Renamed its_create_neighbors_index() / its_create_neighbors_index_par() to its_face_neighbors() / its_face_neighbors_par().
New variant of its_face_edge_ids() to create edge IDs from face neighbors.
Fixed some incorrect use of _NDEBUG, it should be NDEBUG.
PrintObject::slice_support_volumes() returns newly Polygons, which are cheaper than ExPolygons.
Updated SeamPlacer and SupportMaterial to use regions defined as Polygons, not ExPolygons.
TriangleSelector::get_facets_strict() returning a patch with T-joints retriangulated.
New slice_mesh_slabs() - slicing projections of a triangle patch into top / bottom layers of slices, for MMU top / bottom segmentation.
TriangleMeshSlicer - use 64 mutexes instead of one when scattering sliced triangles into layers. This makes a big difference on modern many core desktop computers.
When applying MM segmented regions to input regions, the split regions are now re-merged with 10x higher positive offset epsilon to avoid creating gaps.
When testing for existence of paint-on supports or seam, use a more efficient has_facets() test, which does not deserialize into the expensive TriangleSelector tree structure.
GLIndexedVertexArray newly uses Eigen::AlignedBox<float, 3> for efficiency instead of our double based BoundingBoxf3.
Improved MMU painting refresh speed by optimizing generation of the vertex buffers.
Refactored MMU segmentation - projection of painted surfaces from top / bottom.
1) Parallelized.
2) Using the new slice_mesh_slabs() instead of projecting one triangle by the other and merging them with Clipper.
S3D's strategy for merging self intersecting models is "Even / Odd"
which PrusaSlicer now supports as an alternative to "Positive" rule.
Also added a "Close Holes" option to fill in all internal structures.
3D-Labprint Models aren't sliceable (till years) #3062#3708
