+ Fixed a crash during change object selection, when CutGizmo is On
+ Fixed Undo/Redo (was accidentally broken with 7912613dc8e11db2ddea8018ce16b26a01756a3b)
That allows computed better values in cases when the extrusion width of the first layer or for the infill differs from the extrusion width for perimeters.
Parameters min_feature_size and wall_transition_length now can be set in percentages, and then they will be calculated based on nozzle size. Old profiles with default values are forced to replace old default values with new default values in percentages.
1) Lost orientation after reload from disk (SPE-1182)
2) Wrong objects replacement from reload from disk command (SPE-1183)
3) Reload from disk not disabled for built-in models (SPE-1184)
1) Added parsing of 3MF PrusaSlicer generator semantic version
2) For 3MFs generated by >= "2.4.0-alpha1" and < "2.4.0-alpha3",
remove unreferenced vertices on loading. This should shrink the incorrectly
generated 3MFs back.
3) Added check for an empty mesh, which could have crashed PrusaSlicer on 3MF parsing.
TriangleMesh newly only holds indexed_triangle_set and
TriangleMeshStats. TriangleMeshStats contains an excerpt of stl_stats.
TriangleMeshStats are updated when initializing with indexed_triangle_set.
Admesh triangle mesh fixing is newly only used when loading an STL.
AMF / 3MF / OBJ file formats are already indexed triangle sets, thus
they are no more converted to admesh stl_file format, nor fixed
through admesh repair machinery. When importing AMF / 3MF / OBJ files,
volume is calculated and if negative, all faces are flipped. Also
a bounding box and number of open edges is calculated.
Implemented its_number_of_patches(), its_num_open_edges()
Optimized its_split(), its_is_splittable() using a visitor pattern.
Reworked QHull integration into TriangleMesh:
1) Face normals were not right.
2) Indexed triangle set is newly emitted instead of duplicating
vertices for each face.
Fixed cut_mesh(): Orient the triangulated faces correctly.
1) Changed the name of the variable "brim_offset" to "brim_separation"
for clarity.
2) Added legacy conversion after loading an old 3MF that does not define
then new "brim_separation" variable: The "brim_separation" is being
filled in with the "elefant_foot_compensation" value to produce
equal brim separation to the old PrusaSlicer that saved that 3MF file.
1) Starting with this commit, configuration block exported into G-code
is delimited by "; prusaslicer_config = begin" and "; prusaslicer_config = end".
These delimiters look like any other key / value configuration pairs
on purpose to be compatible with older PrusaSlicer config parsing from G-code.
2) Config parser from G-code newly searches for "; generated by ..."
comment over the complete G-code, thus it is compatible with various
post processing scripts extending the G-code at the start.
3) Config parser from G-code parses PrusaSlicer version from
the "; generated by PrusaSlicer ...." header and if the G-code was
generated by PrusaSlicer 2.4.0-alpha0 and newer, it expects that
the G-code already contains the "; prusaslicer_config = begin / end"
tags and it relies on these tags to extract configuration.
4) A new simple and robust parser was written for reading project configuration
from 3MF / AMF, while a heuristic parser to read config from G-code located
at the end of the G-code file was used before.
Make is_converted_from_meters / is_converted_from_inches exclusive-or.
Maybe it would be better to make a single enum from the two booleans,
if they are exclusive-or?
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
As a preparation for PrusaSlicer 2.4.0, the new firmware_flavor
"marlinfirmware" (signifying Marlin 2.0 and newer) that is not
supported by 2.3.2 yet will default to "marlin" (signifying legacy
Marlin).
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
Changed the serialization structure
std::map<int, std::vector<bool>>
to a significantly more compact
std::pair<std::vector<std::pair<int, int>>, std::vector<bool>>
Such change shall significantly improve efficiency of Undo / Redo stack.
This is more a workaround than a fix: Windows 10 3D model fixing API refuses
to load a zip64 encoded 3MF. We need to get in touch with Microsoft on that
issue, for now the 3MFs generated for the Windows 10 3D model fixing API
will be limited to 4GB. Saving a bigger 3MF will fail.
under soluble supports. #5823
Implemented as a pull request #5903 by @spiky2021
and reworked.
commit c7993e619225553a2c4078787907b9ebbd9ac759
Author: spiky2021 <77010315+spiky2021@users.noreply.github.com>
Date: Thu Feb 11 12:39:25 2021 +0100
Base type interfaces for soluble interface supports
At the moment soluble support material adhesion is weak due to sparse support layers under soluble support layers. I reported as issue #5823 with pictures, as well.
I modified two methods to the SupportMaterial Class including their headers.
The new methods add two base type interface layers to the support structure, in case the extruders are different and soluble support is choosen.
Since it is conditionally activated, it in general doesn't need a GUI input. But a GUI option number of base interface layers may enabled users to adapt this feature to their needs.
This is my second try to provide a pull request on this topic. Reset my fromer repository, because first I merged this and all other changes to my master and couldn't provide separate pull request anymore.
