- removed skinnydip_unloading_speed, unloading_speed is used instead
- the new parameter wipe_tower_extra_flow now automatically adjusts spacing
- the extra flow is seen in the preview
- skinnydip moves were simplified
- for MK4, pressure advance is kept for ramming and disabled for skinnydip
- G4 S0/R were swapped
- for MK4, the new temperature is set before the last cooling move
- range of the ramming dialog increased to 60 mm3/s
- fixed skinnydip_extra_move
- fixed temperature setting after cold_ramming
this happened when the wipe tower was not generated in the data for the conflict
checker. The code was refactored to not use the extra FakeWipeTower class, all
wipe tower related info is in Print::WipeTowerData object
* Prepared ConfigDefs for placeholders used in EditGCodeDialog.
* Removed unused code and files
* DEBUG mode only: Added check of placeholder's existence in custom_gcode_specific_placeholders and custom_gcode_specific_config_def during the custom G-code parsing.
diameter. Fixes SPE-1451 GH#9555
Fixed by reporting invalid combination of support extrusion width
and tip + branch diameter:
Organic support tree tip diameter must not be smaller than support material extrusion width.
Organic support branch diameter must not be smaller than 2x support material extrusion width.
Organic support branch diameter must not be smaller than support tree tip diameter.
Added GCode Block save/load with no encoding
Changed blocks order to: File metadata|Printer metadata|Thumbnails[]|Print metadata|Slicer metadata|GCode[]
WIP GCode/SmoothPath.cpp,hpp cache for interpolating extrusion path with arches.
Removed Perl test t/geometry.t, replaced with C++ tests.
Refactored ExtrusionEntity and derived classes to hold extrusion attributes in new ExtrusionFlow/ExtrusionAttributes classes.
Reworked path ordering in G-code export to never copy polylines, but to work with a new "flipped" attribute.
Reworked G-code export to interpolate extrusion paths with smooth paths and to extrude those smooth paths.
New parameters: arc_fitting, arc_fitting_tolerance
Renamed GCode class to GCodeGenerator
Moved GCodeWriter.cpp/hpp to GCode/
Moved Wipe from from GCode.cpp,hpp to GCode/Wipe.cpp,hpp
Moved WipeTowerIntegration from GCode.cpp,hpp to GCode/WipeTowerIntegration.cpp,hpp
New variant of douglas_peucker() to simplify range of iterators in place.
Refactored wipe in general and wipe on perimeters / hiding seams.
WIP: Convert estimate_speed_from_extrusion_quality() and its application to smooth paths.
WIP: Cooling buffer to process G2G3, disable arc fitting for filters that cannot process it.
Succesfully enhanced and integrated into PrusaSlicer from BambuStudio:
d43c7d5c92d72b4c1bfe87eb0f3665b5b7264e99
Code taken from BambuStudio is embedded into tech ENABLE_BAMBUSTUDIO_TOOLPATHS_CONFLICTS_DETECTION
Changes to adapt the code to PrusaSlicer is embedded into tech ENABLE_BAMBUSTUDIO_TOOLPATHS_CONFLICTS_DETECTION_MOD
Co-authored-by: manch1n <miaoxin.chen@bambulab.com>
Co-authored-by: miaoxin <miaoxin.chen@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
