///|/ Copyright (c) Prusa Research 2016 - 2023 Pavel Mikuš @Godrak, Lukáš Hejl @hejllukas, Vojtěch Bubník @bubnikv, Lukáš Matěna @lukasmatena, Vojtěch Král @vojtechkral
///|/ Copyright (c) SuperSlicer 2019 Remi Durand @supermerill
///|/
///|/ ported from lib/Slic3r/Fill/Base.pm:
///|/ Copyright (c) Prusa Research 2016 Vojtěch Bubník @bubnikv
///|/ Copyright (c) Slic3r 2011 - 2014 Alessandro Ranellucci @alranel
///|/
///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
///|/
#ifndef slic3r_FillBase_hpp_
#define slic3r_FillBase_hpp_

#include <assert.h>
#include <memory.h>
#include <float.h>
#include <stdint.h>
#include <stdexcept>

#include <type_traits>

#include "../libslic3r.h"
#include "../BoundingBox.hpp"
#include "../Exception.hpp"
#include "../Utils.hpp"
#include "../ExPolygon.hpp"
#include "../PrintConfig.hpp"

namespace Slic3r {

class Surface;
enum InfillPattern : int;

namespace FillAdaptive {
    struct Octree;
};

// Infill shall never fail, therefore the error is classified as RuntimeError, not SlicingError.
class InfillFailedException : public Slic3r::RuntimeError {
public:
    InfillFailedException() : Slic3r::RuntimeError("Infill failed") {}
};

struct FillParams
{
    bool        full_infill() const { return density > 0.9999f; }
    // Don't connect the fill lines around the inner perimeter.
    bool        dont_connect() const { return anchor_length_max < 0.05f; }

    // Fill density, fraction in <0, 1>
    float       density 		{ 0.f };

    // Length of an infill anchor along the perimeter.
    // 1000mm is roughly the maximum length line that fits into a 32bit coord_t.
    float       anchor_length       { 1000.f };
    float       anchor_length_max   { 1000.f };

    // G-code resolution.
    double      resolution          { 0.0125 };

    // Don't adjust spacing to fill the space evenly.
    bool        dont_adjust 	{ true };

    // Monotonic infill - strictly left to right for better surface quality of top infills.
    bool 		monotonic		{ false };

    // For Honeycomb.
    // we were requested to complete each loop;
    // in this case we don't try to make more continuous paths
    bool        complete 		{ false };

    // For Concentric infill, to switch between Classic and Arachne.
    bool        use_arachne     { false };
    // Layer height for Concentric infill with Arachne.
    coordf_t    layer_height    { 0.f };

    // For infills that produce closed loops to force printing those loops clockwise.
    bool        prefer_clockwise_movements { false };
};
static_assert(IsTriviallyCopyable<FillParams>::value, "FillParams class is not POD (and it should be - see constructor).");

class Fill
{
public:
    // Index of the layer.
    size_t      layer_id;
    // Z coordinate of the top print surface, in unscaled coordinates
    coordf_t    z;
    // in unscaled coordinates
    coordf_t    spacing;
    // infill / perimeter overlap, in unscaled coordinates
    coordf_t    overlap;
    // in radians, ccw, 0 = East
    float       angle;
    // In scaled coordinates. Maximum lenght of a perimeter segment connecting two infill lines.
    // Used by the FillRectilinear2, FillGrid2, FillTriangles, FillStars and FillCubic.
    // If left to zero, the links will not be limited.
    coord_t     link_max_length;
    // In scaled coordinates. Used by the concentric infill pattern to clip the loops to create extrusion paths.
    coord_t     loop_clipping;
    // In scaled coordinates. Bounding box of the 2D projection of the object.
    BoundingBox bounding_box;

    // Octree builds on mesh for usage in the adaptive cubic infill
    FillAdaptive::Octree* adapt_fill_octree = nullptr;

    // PrintConfig and PrintObjectConfig are used by infills that use Arachne (Concentric and FillEnsuring).
    const PrintConfig       *print_config        = nullptr;
    const PrintObjectConfig *print_object_config = nullptr;

public:
    virtual ~Fill() {}
    virtual Fill* clone() const = 0;

    static Fill* new_from_type(const InfillPattern type);
    static Fill* new_from_type(const std::string &type);
    static bool  use_bridge_flow(const InfillPattern type);

    void         set_bounding_box(const Slic3r::BoundingBox &bbox) { bounding_box = bbox; }

    // Use bridge flow for the fill?
    virtual bool use_bridge_flow() const { return false; }

    // Do not sort the fill lines to optimize the print head path?
    virtual bool no_sort() const { return false; }

    virtual bool is_self_crossing() = 0;

    // Perform the fill.
    virtual Polylines fill_surface(const Surface *surface, const FillParams &params);
    virtual ThickPolylines fill_surface_arachne(const Surface *surface, const FillParams &params);

protected:
    Fill() :
        layer_id(size_t(-1)),
        z(0.),
        spacing(0.),
        // Infill / perimeter overlap.
        overlap(0.),
        // Initial angle is undefined.
        angle(FLT_MAX),
        link_max_length(0),
        loop_clipping(0),
        // The initial bounding box is empty, therefore undefined.
        bounding_box(Point(0, 0), Point(-1, -1))
        {}

    // The expolygon may be modified by the method to avoid a copy.
    virtual void    _fill_surface_single(
        const FillParams                & /* params */,
        unsigned int                      /* thickness_layers */,
        const std::pair<float, Point>   & /* direction */,
        ExPolygon                         /* expolygon */,
        Polylines                       & /* polylines_out */) {}

    // Used for concentric infill to generate ThickPolylines using Arachne.
    virtual void _fill_surface_single(const FillParams              &params,
                                      unsigned int                   thickness_layers,
                                      const std::pair<float, Point> &direction,
                                      ExPolygon                      expolygon,
                                      ThickPolylines                &thick_polylines_out) {}

    virtual float _layer_angle(size_t idx) const { return (idx & 1) ? float(M_PI/2.) : 0; }


public:
    virtual std::pair<float, Point> _infill_direction(const Surface *surface) const;
    static void connect_infill(Polylines &&infill_ordered, const ExPolygon &boundary, Polylines &polylines_out, const double spacing, const FillParams &params);
    static void connect_infill(Polylines &&infill_ordered, const Polygons &boundary, const BoundingBox& bbox, Polylines &polylines_out, const double spacing, const FillParams &params);
    static void connect_infill(Polylines &&infill_ordered, const std::vector<const Polygon*> &boundary, const BoundingBox &bbox, Polylines &polylines_out, double spacing, const FillParams &params);

    static void connect_base_support(Polylines &&infill_ordered, const std::vector<const Polygon*> &boundary_src, const BoundingBox &bbox, Polylines &polylines_out, const double spacing, const FillParams &params);
    static void connect_base_support(Polylines &&infill_ordered, const Polygons &boundary_src, const BoundingBox &bbox, Polylines &polylines_out, const double spacing, const FillParams &params);

    static coord_t  _adjust_solid_spacing(const coord_t width, const coord_t distance);
};

} // namespace Slic3r

#endif // slic3r_FillBase_hpp_