bubnikv 0454cc95f9 Ported the cooling changes from @alexrj: Don't slow down the external ...

perimeters if not necessary, don't take the bridging time into account
when slowing down the print.

Removed Extruder & GCodeWriter Perl bindings.
Improved Extruder for constness.
Refactored GCode::m_elapsed_time to struct ElapsedTime.

2017-06-22 12:59:23 +02:00

..

angles.t

Bugfix: medial axis missed some segments. #2144

2014-08-03 15:03:47 +02:00

avoid_crossing_perimeters.t

Fixed regression causing crash when using avoid_crossing_perimeters with multiple object, caused by recent refactorings. Added regression test

2014-11-26 22:46:51 +01:00

bridges.t

Reworked the bridge detector to allow searching a single bridging

2016-11-08 09:59:25 +01:00

clean_polylines.t

Removed more unused functions and fixed tests

2013-11-22 16:19:15 +01:00

clipper.t

Fix more regressions in test suite regarding the workaround for Clipper bug

2014-05-21 15:45:16 +02:00

collinear.t

Removed dependency on Math::Clipper

2013-08-27 01:26:44 +02:00

combineinfill.t

Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled

2015-03-06 09:56:58 +01:00

config.t

Removed setenv() test as we can't test environment variables in Perl since they are now set in XS

2015-07-01 20:15:52 +02:00

cooling.t

Ported the cooling changes from @alexrj: Don't slow down the external

2017-06-22 12:59:23 +02:00

custom_gcode.t

Ported expanded_output_filepath() to C++/XS

2017-02-28 10:38:32 +01:00

dynamic.t

Port offset_ex() and offset2_ex() to XS

2013-07-16 20:09:53 +02:00

fill.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

flow.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

gaps.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

gcode.t

Test to ensure that the repetier firmware returns the correct acceleration M code and that the values are set properly.

2017-02-10 09:39:33 +01:00

geometry.t

Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857

2015-06-01 17:55:51 +02:00

layers.t

Failing test for broken command line scaling. #1889

2014-04-05 11:21:26 +02:00

loops.t

Fix threads, tests and require the most recent Moo version

2013-09-12 11:09:03 +02:00

multi.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

perimeters.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

polyclip.t

Removed more unused functions and fixed tests

2013-11-22 16:19:15 +01:00

print.t

Increased a threshold for print centering from EPSILON to 5um

2017-03-23 13:21:44 +01:00

retraction.t

Test case for Bugfix: use Lift-z option for 2. extruder #3385

2016-09-26 12:50:05 +02:00

shells.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

skirt_brim.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

slice.t

Fix threads, tests and require the most recent Moo version

2013-09-12 11:09:03 +02:00

support.t

Slic3r has been modified to propagate the following filament specific

2017-06-21 16:15:39 +02:00

svg.t

Bugfix: failure when exporting SVG from object containing multiple islands. Includes regression test. #2050

2014-05-26 11:13:53 +02:00

thin.t

More refactoring to medial axis and gap fill, more robust

2016-05-20 17:03:57 +02:00

threads.t

More work for removing references to $Slic3r::Config

2013-12-24 11:58:36 +01:00