Jesse Vincent 060d2da7fe Small optimization on an incredibly hot codepath.

2013-04-07 18:01:15 -04:00

..

ExtrusionPath

Do each island completely if avoid_crossing_perimeters is enabled. #278

2013-03-10 16:09:03 +01:00

Fill

Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value

2013-03-17 01:10:40 +01:00

Format

Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865

2013-01-13 10:18:34 +01:00

GCode

Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071

2013-04-04 01:17:44 +02:00

Geometry

Safer safety_offset() for ExPolygons

2013-03-26 13:57:37 +01:00

GUI

Bugfix: configuration wizard led to crash with simple mode. #1077

2013-04-03 19:26:59 +02:00

Layer

Allow 0.1mm slots. #959 #1056

2013-04-04 01:24:40 +02:00

Print

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Config.pm

New wipe feature

2013-03-17 02:22:50 +01:00

ExPolygon.pm

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Extruder.pm

New wipe feature

2013-03-17 02:22:50 +01:00

ExtrusionLoop.pm

Missing bit

2013-03-11 12:47:27 +01:00

ExtrusionPath.pm

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Fill.pm

Refactoring: use the clone() method for inflating Surface objects

2013-03-29 19:18:06 +01:00

Flow.pm

Use full flow for sparse infill by default

2013-03-17 00:21:17 +01:00

GCode.pm

Don't wipe if option is disabled

2013-04-03 19:08:12 +02:00

Geometry.pm

Small optimization on an incredibly hot codepath.

2013-04-07 18:01:15 -04:00

GUI.pm

Move ObjectDialog to a separate file

2013-03-10 12:33:10 +01:00

Layer.pm

Factored out the layer height logic

2013-03-10 11:37:16 +01:00

Line.pm

Completed vibration limit

2012-11-17 12:08:19 +01:00

Model.pm

Slice a single object with multiple layer heights. :-)

2013-03-10 14:58:49 +01:00

Point.pm

Merge branch 'master' into avoid-crossing-perimeters

2013-01-12 19:00:18 +01:00

Polygon.pm

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Polyline.pm

Merge branch 'wipe'

2013-03-31 11:36:04 +02:00

Print.pm

Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071

2013-04-04 01:17:44 +02:00

Surface.pm

Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068

2013-03-29 19:24:08 +01:00

SVG.pm

Added support for expolygons in Slic3r::SVG

2013-03-11 14:23:45 +01:00

Test.pm

Fix test framework detecting dE=0 as retraction

2013-03-18 18:01:01 +01:00

TriangleMesh.pm

Bugfix: horizontal projection for high-res models might show corrupted result

2013-03-17 15:39:51 +01:00