mirror of
https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git
synced 2025-08-15 02:16:01 +08:00
Merge remote-tracking branch 'remotes/slic3r/move-libslic3r-tests'
This commit is contained in:
remi durand
commit
14fcba309e
3
.github/CODEOWNERS
vendored
Normal file
3
.github/CODEOWNERS
vendored
Normal file
@ -0,0 +1,3 @@
|
||||
* @lordofhyphens @supermerill
|
||||
|
||||
.github/CODEOWNERS @lordofhyphens
|
||||
55
.github/CONTRIBUTING.md
vendored
55
.github/CONTRIBUTING.md
vendored
@ -1,21 +1,62 @@
|
||||
Did you encounter an issue with using PrusaSlicer? Fear not! This guide will help you to write a good bug report in just a few, simple steps.
|
||||
# CONTRIBUTING
|
||||
|
||||
There is a good chance that the issue, you have encountered, is already reported. Please check the [list of reported issues](https://github.com/prusa3d/PrusaSlicer/issues) before creating a new issue report. If you find an existing issue report, feel free to add further information to that report.
|
||||
## Bug Reports
|
||||
|
||||
If possible, please include the following information when [reporting an issue](https://github.com/prusa3d/PrusaSlicer/issues/new):
|
||||
* PrusaSlicer version (See the about dialog for the version number. If running from git, please include the git commit ID from `git rev-parse HEAD` also.)
|
||||
Did you encounter an issue with using Slic3r? Fear not! This guide will help you to write a good bug report in just a few, simple steps.
|
||||
|
||||
There is a good chance that the issue, you have encountered, is already reported. Please check the [list of reported issues](https://github.com/alexrj/Slic3r/issues) before creating a new issue report. If you find an existing issue report, feel free to add further information to that report.
|
||||
|
||||
If you are reporting an issue relating to a release version of Slic3r, it would help a lot if you could also confirm that the behavior is still present in the newest build [(windows)](https://bintray.com/lordofhyphens/Slic3r/slic3r_dev/). Otherwise your issue will be closed as soon as someone else isn't able to reproduce it on current master.
|
||||
|
||||
When possible, please include the following information when [reporting an issue](https://github.com/alexrj/Slic3r/issues/new):
|
||||
* Slic3r version (See the about dialog for the version number. If running from git, please include the git commit ID from `git rev-parse HEAD` also.)
|
||||
* Operating system type + version
|
||||
* Steps to reproduce the issue, including:
|
||||
* Command line parameters used, if any
|
||||
* PrusaSlicer configuration file (Use ``Export Config...`` from the ``File`` menu - please don't export a bundle)
|
||||
* Slic3r configuration file (Use ``Export Config...`` from the ``File`` menu - please don't export a bundle)
|
||||
* Expected result
|
||||
* Actual result
|
||||
* Any error messages
|
||||
* If the issue is related to G-code generation, please include the following:
|
||||
* STL, OBJ or AMF input file (please make sure the input file is not broken, e.g. non-manifold, before reporting a bug)
|
||||
* a screenshot of the G-code layer with the issue (e.g. using [Pronterface](https://github.com/kliment/Printrun))
|
||||
* a screenshot of the G-code layer with the issue (e.g. using [Pronterface](https://github.com/kliment/Printrun) or preferably the internal preview tab in Slic3r).
|
||||
* If the issue is a request for a new feature, be ready to explain why you think it's needed.
|
||||
* Doing more preparatory work on your end makes it more likely it'll get done. This includes the "how" it can be done in addition to the "what".
|
||||
* Define the "What" as strictly as you can. Consider what might happen with different infills than simple rectilinear.
|
||||
|
||||
Please make sure only to include one issue per report. If you encounter multiple, unrelated issues, please report them as such.
|
||||
|
||||
Simon Tatham has written an excellent on article on [How to Report Bugs Effectively](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html) which is well worth reading, although it is not specific to PrusaSlicer.
|
||||
Simon Tatham has written an excellent on article on [How to Report Bugs Effectively](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html) which is well worth reading, although it is not specific to Slic3r.
|
||||
|
||||
## Submitting a Patch
|
||||
|
||||
Do you want to help fix issues in or add features to Slic3r? That's also very, very welcome :)
|
||||
|
||||
Basically you can follow the [GitHub
|
||||
flow](https://guides.github.com/introduction/flow/) for submitting
|
||||
patches, but please also read below for more specific information about
|
||||
contributing to the Slic3r project.
|
||||
|
||||
* Development
|
||||
* [Low Effort tasks](https://github.com/slic3r/Slic3r/labels/Low%20Effort): pick one of them!
|
||||
* [Help Wanted tasks](https://github.com/slic3r/Slic3r/labels/help%20wanted): pick one of them!
|
||||
* [More available tasks](https://github.com/slic3r/Slic3r/milestone/32): let's discuss together before you start working on them
|
||||
* Please comment in the related GitHub issue that you are working on it so that other people know.
|
||||
* Review the [TODO wiki page](https://github.com/slic3r/Slic3r/wiki/TODO).
|
||||
* Contribute to the [Manual](http://manual.slic3r.org/)! (see its [GitHub repository](https://github.com/slic3r/Slic3r-Manual))
|
||||
* Add an [issue](https://github.com/slic3r/Slic3r/issues) to the GitHub tracker if it isn't already present.
|
||||
* Update Slic3r's test suite to improve test coverage [Writing Test Cases](https://github.com/slic3r/Slic3r/wiki/Code:-Writing-Test-Cases)
|
||||
* A good place to start if you can is to look over the [Pull Request or Bust](https://github.com/alexrj/Slic3r/milestones/Pull%20Request%20or%20Bust) milestone. This contains all of the things (mostly new feature requests) that there isn't time or resources to address at this time.
|
||||
* Things that are probably fixable via scripts (usually marked as such) have the lowest bar to getting something that works, as you don't need to recompile Slic3r to test.
|
||||
* If you're starting on an issue, please say something in the related issues thread so that someone else doesn't start working on it too.
|
||||
* If there's nothing in the [Pull Request or Bust](https://github.com/alexrj/Slic3r/milestones/Pull%20Request%20or%20Bust) milestone that interests you, the next place to look is for issues that don't have a milestone. Lots of people commit ideas to Slic3r, and it's difficult to keep up and sort through them.
|
||||
* Before sending a pull request, please make sure that the changes you are submitting are contained in their own git branch, as PRs merge histories.
|
||||
* Pull requests that contain unrelated changes will be rejected.
|
||||
* A common workflow is to fork the master branch, create your new branch and do your work there. git-rebase and git-cherry-pick are also helpful for separating out unrelated changes.
|
||||
* If you are pushing Slic3r code changes that touch the main application, it is very much appreciated if you write some tests that check the functionality of the code. It's much easier to vet and merge in code that includes tests and doing so will likely speed things up.
|
||||
|
||||
## Communication
|
||||
|
||||
* #slic3r on [FreeNode](https://webchat.freenode.net): talk to _Sound_, _LoH_ or the other members of the Slic3r community.
|
||||
* Drop Alessandro a line at aar@cpan.org.
|
||||
* Drop Joseph a line at lenox.joseph@gmail.com
|
||||
|
||||
23
.github/ISSUE_TEMPLATE.md
vendored
23
.github/ISSUE_TEMPLATE.md
vendored
@ -1,11 +1,14 @@
|
||||
### Version
|
||||
_Version of SupserSlicer used goes here, Use `About->About SuperSlicer`_
|
||||
_Version of Slic3r used goes here_
|
||||
|
||||
_Use `About->About Slic3r` for release versions._
|
||||
|
||||
_Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. *Only* use normal Slic3r version IDs._
|
||||
|
||||
_For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-parse HEAD`_
|
||||
|
||||
### Operating system type + version
|
||||
_What OS are you using (and version)_
|
||||
|
||||
### 3D printer brand / version + firmware version (if known)
|
||||
_What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s_
|
||||
_What OS are you using, and state any version #s_
|
||||
|
||||
### Behavior
|
||||
* _Describe the problem_
|
||||
@ -13,7 +16,11 @@ _What 3D printer brand / version are you printing on, is it a stock model or did
|
||||
* _If this is a command-line slicing issue, include the options used_
|
||||
* _Expected Results_
|
||||
* _Actual Results_
|
||||
* _Screenshots from __*SuperSlicer*__ preview are preferred_
|
||||
* _Screenshots from __*Slic3r*__ preview are preferred_
|
||||
|
||||
#### Project File (.3MF) where problem occurs
|
||||
_Upload a SuperSlicer Project File (.3MF) (`File -> Save` / `Save Project`)_
|
||||
_Is this a new feature request?_
|
||||
Related guides for writing feature requests: http://meta.stackexchange.com/a/259196 http://nickohrn.com/2013/09/write-great-feature-request-bug-report/
|
||||
|
||||
|
||||
#### STL/Config (.ZIP) where problem occurs
|
||||
_Upload a zipped copy of an STL and your config (`File -> Export Config`)_
|
||||
|
||||
36
.github/ISSUE_TEMPLATE/bug_report.md
vendored
Normal file
36
.github/ISSUE_TEMPLATE/bug_report.md
vendored
Normal file
@ -0,0 +1,36 @@
|
||||
---
|
||||
name: Bug report
|
||||
about: Create a report to help us improve
|
||||
|
||||
---
|
||||
|
||||
### Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. [Development builds of Slic3r](https://dl.slic3r.org/dev). [Prusa3D Issue Tracker](https://github.com/Prusa3D/Slic3r/issues)
|
||||
|
||||
**Describe the bug**
|
||||
A clear and concise description of what the bug is.
|
||||
|
||||
**To Reproduce**
|
||||
Steps to reproduce the behavior:
|
||||
1. Go to '...'
|
||||
2. Click on '....'
|
||||
3. Scroll down to '....'
|
||||
4. See error
|
||||
|
||||
**3D Model and Slic3r Configuration Export**
|
||||
Please upload a ZIP archive containing a copy of the 3D model you are seeing this bug with and a CTRL-E export of the configuration used.
|
||||
|
||||
**Expected behavior**
|
||||
A clear and concise description of what you expected to happen.
|
||||
|
||||
**Screenshots**
|
||||
If applicable, add screenshots to help explain your problem.
|
||||
|
||||
**Desktop (please complete the following information):**
|
||||
- OS: [e.g. MacOS, Linux, Windows]
|
||||
- Version [e.g. 1.3.0]
|
||||
- _Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. *Only* use normal Slic3r version IDs._
|
||||
- _For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-parse HEAD`_
|
||||
- _Use `About->About Slic3r` for release versions._
|
||||
|
||||
**Additional context**
|
||||
Add any other context about the problem here.
|
||||
19
.github/ISSUE_TEMPLATE/feature_request.md
vendored
Normal file
19
.github/ISSUE_TEMPLATE/feature_request.md
vendored
Normal file
@ -0,0 +1,19 @@
|
||||
---
|
||||
name: Feature request
|
||||
about: Suggest an idea for this project
|
||||
|
||||
---
|
||||
|
||||
### Do not request features for the Prusa3D fork of Slic3r here without confirming it is applicable to the mainline Slic3r, or your issue will be closed. [Development builds of Slic3r](https://dl.slic3r.org/dev). [Prusa3D Issue Tracker](https://github.com/Prusa3D/Slic3r/issues)
|
||||
|
||||
**Is your feature request related to a problem? Please describe.**
|
||||
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
|
||||
|
||||
**Describe the solution you'd like**
|
||||
A clear and concise description of what you want to happen.
|
||||
|
||||
**Describe alternatives you've considered**
|
||||
A clear and concise description of any alternative solutions or features you've considered.
|
||||
|
||||
**Additional context**
|
||||
Add any other context or screenshots about the feature request here.
|
||||
32
.github/ISSUE_TEMPLATE/old-slic3r-issue-template.md
vendored
Normal file
32
.github/ISSUE_TEMPLATE/old-slic3r-issue-template.md
vendored
Normal file
@ -0,0 +1,32 @@
|
||||
---
|
||||
name: Old Slic3r Issue Template
|
||||
about: Use the other ones if possible.
|
||||
|
||||
---
|
||||
|
||||
### Version
|
||||
_Version of Slic3r used goes here_
|
||||
|
||||
_Use `About->About Slic3r` for release versions._
|
||||
|
||||
_Do not report Prusa3D Slic3r bugs here without confirming it is a problem on a development release of Slic3r, or your issue will be closed. *Only* use normal Slic3r version IDs._
|
||||
|
||||
_For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-parse HEAD`_
|
||||
|
||||
### Operating system type + version
|
||||
_What OS are you using, and state any version #s_
|
||||
|
||||
### Behavior
|
||||
* _Describe the problem_
|
||||
* _Steps needed to reproduce the problem_
|
||||
* _If this is a command-line slicing issue, include the options used_
|
||||
* _Expected Results_
|
||||
* _Actual Results_
|
||||
* _Screenshots from __*Slic3r*__ preview are preferred_
|
||||
|
||||
_Is this a new feature request?_
|
||||
Related guides for writing feature requests: http://meta.stackexchange.com/a/259196 http://nickohrn.com/2013/09/write-great-feature-request-bug-report/
|
||||
|
||||
|
||||
#### STL/Config (.ZIP) where problem occurs
|
||||
_Upload a zipped copy of an STL and your config (`File -> Export Config`)_
|
||||
50
.github/workflows/ccpp_mac.yml
vendored
50
.github/workflows/ccpp_mac.yml
vendored
@ -43,9 +43,9 @@ jobs:
|
||||
- name: cmake
|
||||
working-directory: ./build
|
||||
run: cmake .. -DCMAKE_PREFIX_PATH="$PWD/../deps/build/destdir/usr/local" -DCMAKE_OSX_DEPLOYMENT_TARGET="10.13" -DSLIC3R_STATIC=1
|
||||
- name: make SuperSlicer
|
||||
- name: make Slic3r
|
||||
working-directory: ./build
|
||||
run: make SuperSlicer
|
||||
run: make Slic3r
|
||||
- name: update Info.plist
|
||||
working-directory: ./build/src
|
||||
run: sed "s/+UNKNOWN/_$(date '+%F')/" Info.plist >Info.date.plist
|
||||
@ -53,32 +53,32 @@ jobs:
|
||||
working-directory: ./build
|
||||
run: |
|
||||
mkdir pack
|
||||
mkdir pack/SuperSlicer
|
||||
mkdir pack/SuperSlicer/SuperSlicer.app
|
||||
mkdir pack/SuperSlicer/SuperSlicer.app/Contents
|
||||
mkdir pack/SuperSlicer/SuperSlicer.app/Contents/_CodeSignature
|
||||
mkdir pack/SuperSlicer/SuperSlicer.app/Contents/Frameworks
|
||||
mkdir pack/SuperSlicer/SuperSlicer.app/Contents/MacOS
|
||||
mkdir pack/Slic3r
|
||||
mkdir pack/Slic3r/Slic3r.app
|
||||
mkdir pack/Slic3r/Slic3r.app/Contents
|
||||
mkdir pack/Slic3r/Slic3r.app/Contents/_CodeSignature
|
||||
mkdir pack/Slic3r/Slic3r.app/Contents/Frameworks
|
||||
mkdir pack/Slic3r/Slic3r.app/Contents/MacOS
|
||||
- name: copy Resources
|
||||
working-directory: ./build
|
||||
run: |
|
||||
cp -Rf ../resources pack/SuperSlicer/SuperSlicer.app/Contents/Resources
|
||||
cp pack/SuperSlicer/SuperSlicer.app/Contents/Resources/icons/slic3r.icns pack/SuperSlicer/SuperSlicer.app/Contents/resources/Slic3r.icns
|
||||
cp src/Info.date.plist pack/SuperSlicer/SuperSlicer.app/Contents/Info.plist
|
||||
cp -Rf ../resources pack/Slic3r/Slic3r.app/Contents/Resources
|
||||
cp pack/Slic3r/Slic3r.app/Contents/Resources/icons/slic3r.icns pack/Slic3r/Slic3r.app/Contents/resources/Slic3r.icns
|
||||
cp src/Info.date.plist pack/Slic3r/Slic3r.app/Contents/Info.plist
|
||||
echo -n -e 'APPL????\x0a' > PkgInfo
|
||||
cp PkgInfo pack/SuperSlicer/SuperSlicer.app/Contents/PkgInfo
|
||||
cp PkgInfo pack/Slic3r/Slic3r.app/Contents/PkgInfo
|
||||
# echo -n -e '\xff\xfeAPPL\x3f\x00\x3f\x00\x3f\x00\x3f\x00\x0a\x00' > PkgInfo
|
||||
- name: copy bin and do not let it lower case
|
||||
working-directory: ./build
|
||||
run: |
|
||||
cp -f src/SuperSlicer pack/SuperSlicer/SuperSlicer.app/Contents/MacOS/SuperSlicer
|
||||
chmod u+x pack/SuperSlicer/SuperSlicer.app/Contents/MacOS/SuperSlicer
|
||||
tar -cvf SuperSlicer.tar pack/SuperSlicer
|
||||
cp -f src/Slic3r pack/Slic3r/Slic3r.app/Contents/MacOS/Slic3r
|
||||
chmod u+x pack/Slic3r/Slic3r.app/Contents/MacOS/Slic3r
|
||||
tar -cvf Slic3r.tar pack/Slic3r
|
||||
- name: create dmg
|
||||
working-directory: ./build
|
||||
run: |
|
||||
hdiutil create -ov -fs HFS+ -volname "SuperSlicer" -srcfolder "pack/SuperSlicer" temp.dmg
|
||||
hdiutil convert temp.dmg -format UDZO -o SuperSlicer.dmg
|
||||
hdiutil create -ov -fs HFS+ -volname "Slic3r" -srcfolder "pack/Slic3r" temp.dmg
|
||||
hdiutil convert temp.dmg -format UDZO -o Slic3r.dmg
|
||||
# - name: signing Resources (creating CodeResources inside _CodeSignature)
|
||||
# working-directory: .
|
||||
# run: codesign -s <identity> Resources
|
||||
@ -87,12 +87,12 @@ jobs:
|
||||
uses: actions/upload-artifact@v1.0.0
|
||||
with:
|
||||
name: nightly_macos.tar
|
||||
path: build/SuperSlicer.tar
|
||||
path: build/Slic3r.tar
|
||||
- name: Upload artifact
|
||||
uses: actions/upload-artifact@v1.0.0
|
||||
with:
|
||||
name: nightly_macos.dmg
|
||||
path: build/SuperSlicer.dmg
|
||||
path: build/Slic3r.dmg
|
||||
# build again, but the debug one this time
|
||||
# - name: cmake
|
||||
# working-directory: ./build
|
||||
@ -103,15 +103,15 @@ jobs:
|
||||
# - name: copy bin and do not let it lower case
|
||||
# working-directory: ./build
|
||||
# run: |
|
||||
# cp -f src/superslicer SuperSlicer/SuperSlicer.app/Contents/MacOS/SuperSlicer
|
||||
# chmod u+x SuperSlicer/SuperSlicer.app/Contents/MacOS/SuperSlicer
|
||||
# tar -cvf SuperSlicer.tar SuperSlicer
|
||||
# cp -f src/Slic3r Slic3r/Slic3r.app/Contents/MacOS/Slic3r
|
||||
# chmod u+x Slic3r/Slic3r.app/Contents/MacOS/Slic3r
|
||||
# tar -cvf Slic3r.tar Slic3r
|
||||
# - name: create dmg
|
||||
# working-directory: ./build
|
||||
# run: |
|
||||
# rm SuperSlicer.dmg
|
||||
# hdiutil create -ov -fs HFS+ -volname "SuperSlicer" -srcfolder "SuperSlicer" temp.dmg
|
||||
# hdiutil convert temp.dmg -format UDZO -o SuperSlicer.dmg
|
||||
# rm Slic3r.dmg
|
||||
# hdiutil create -ov -fs HFS+ -volname "Slic3r" -srcfolder "Slic3r" temp.dmg
|
||||
# hdiutil convert temp.dmg -format UDZO -o Slic3r.dmg
|
||||
# - name: Upload artifact
|
||||
# uses: actions/upload-artifact@v1.0.0
|
||||
# with:
|
||||
|
||||
22
.github/workflows/ccpp_ubuntu.yml
vendored
22
.github/workflows/ccpp_ubuntu.yml
vendored
@ -43,10 +43,10 @@ jobs:
|
||||
run: mkdir build
|
||||
- name: cmake
|
||||
working-directory: ./build
|
||||
run: cmake .. -DCMAKE_PREFIX_PATH="/home/runner/work/SuperSlicer/SuperSlicer/deps/build/destdir/usr/local" -DSLIC3R_STATIC=1
|
||||
- name: make SuperSlicer
|
||||
run: cmake .. -DCMAKE_PREFIX_PATH="/home/runner/work/Slic3r/Slic3r/deps/build/destdir/usr/local" -DSLIC3R_STATIC=1
|
||||
- name: make Slic3r
|
||||
working-directory: ./build
|
||||
run: make SuperSlicer
|
||||
run: make Slic3r
|
||||
- name: create directory and copy into it
|
||||
working-directory: ./build
|
||||
run: |
|
||||
@ -57,27 +57,27 @@ jobs:
|
||||
run: cp -Rf ../resources package/resources
|
||||
- name: copy bin
|
||||
working-directory: ./build
|
||||
run: cp -f src/superslicer package/bin/superslicer
|
||||
run: cp -f src/Slic3r package/bin/Slic3r
|
||||
- name: create sh from echo
|
||||
working-directory: ./build/package
|
||||
run: |
|
||||
echo -e '#!/bin/bash\nDIR=$(readlink -f "$0" | xargs dirname)\nexport LD_LIBRARY_PATH="$DIR/bin"\nexec "$DIR/bin/superslicer" "$@"' >superslicer
|
||||
chmod u+x superslicer
|
||||
tar -cvf ../SuperSlicer.tar .
|
||||
echo -e '#!/bin/bash\nDIR=$(readlink -f "$0" | xargs dirname)\nexport LD_LIBRARY_PATH="$DIR/bin"\nexec "$DIR/bin/Slic3r" "$@"' >Slic3r
|
||||
chmod u+x Slic3r
|
||||
tar -cvf ../Slic3r.tar .
|
||||
- name: Upload artifact
|
||||
uses: actions/upload-artifact@v1.0.0
|
||||
with:
|
||||
name: nightly_linux.tar
|
||||
path: build/SuperSlicer.tar
|
||||
path: build/Slic3r.tar
|
||||
- name: build appimage
|
||||
working-directory: ./build/package
|
||||
run: |
|
||||
chmod +x ../../src/platform/unix/build_appimage.sh
|
||||
../../src/platform/unix/build_appimage.sh SuperSlicer_ubu64.AppImage
|
||||
../../src/platform/unix/build_appimage.sh Slic3r_ubu64.AppImage
|
||||
- name: Upload appimage
|
||||
uses: actions/upload-artifact@v1.0.0
|
||||
with:
|
||||
name: SuperSlicer-AppImage.tar
|
||||
path: build/package/SuperSlicer_ubu64.AppImage
|
||||
name: Slic3r-AppImage.tar
|
||||
path: build/package/Slic3r_ubu64.AppImage
|
||||
|
||||
|
||||
8
.github/workflows/ccpp_win.yml
vendored
8
.github/workflows/ccpp_win.yml
vendored
@ -52,7 +52,7 @@ jobs:
|
||||
run: mkdir build
|
||||
- name: cmake
|
||||
working-directory: ./build
|
||||
run: cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_PREFIX_PATH="d:\a\SuperSlicer\SuperSlicer\deps\destdir\usr\local"
|
||||
run: cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_PREFIX_PATH="d:\a\Slic3r\Slic3r\deps\destdir\usr\local"
|
||||
- name: make
|
||||
working-directory: ./build
|
||||
run: msbuild /m /P:Configuration=Release INSTALL.vcxproj
|
||||
@ -67,15 +67,15 @@ jobs:
|
||||
- name: copy from release
|
||||
working-directory: ./build
|
||||
shell: powershell
|
||||
run: '(new-object System.Net.WebClient).DownloadFile("https://github.com/supermerill/SuperSlicer/releases/download/2.2.53.3/SuperSlicer_2.2.53.3_win64_20201005.zip", "SuperSlicer_2.2.53.3_win64_20201005.zip")'
|
||||
run: '(new-object System.Net.WebClient).DownloadFile("https://github.com/supermerill/Slic3r/releases/download/2.2.53.3/Slic3r_2.2.53.3_win64_20201005.zip", "Slic3r_2.2.53.3_win64_20201005.zip")'
|
||||
- name: unzip
|
||||
working-directory: ./build
|
||||
shell: cmd
|
||||
run: '"C:/Program Files/7-Zip/7z.exe" x SuperSlicer_2.2.53.3_win64_20201005.zip'
|
||||
run: '"C:/Program Files/7-Zip/7z.exe" x Slic3r_2.2.53.3_win64_20201005.zip'
|
||||
- name: copy old release content
|
||||
working-directory: ./build
|
||||
shell: cmd
|
||||
run: xcopy /RCYIE SuperSlicer_2.2.53.3_win64_20201005\* package\
|
||||
run: xcopy /RCYIE Slic3r_2.2.53.3_win64_20201005\* package\
|
||||
- name: copy new resources
|
||||
working-directory: ./build
|
||||
shell: cmd
|
||||
|
||||
3
.gitmodules
vendored
Normal file
3
.gitmodules
vendored
Normal file
@ -0,0 +1,3 @@
|
||||
[submodule "src/ArcWelderLib"]
|
||||
path = src/ArcWelderLib
|
||||
url = https://github.com/FormerLurker/ArcWelderLib.git
|
||||
@ -1,5 +1,5 @@
|
||||
cmake_minimum_required(VERSION 3.13)
|
||||
project(SuperSlicer)
|
||||
project(Slic3r)
|
||||
|
||||
include("version.inc")
|
||||
include(GNUInstallDirs)
|
||||
@ -22,11 +22,11 @@ else()
|
||||
endif()
|
||||
endif()
|
||||
|
||||
option(SLIC3R_STATIC "Compile SuperSlicer with static libraries (Boost, TBB, glew)" ${SLIC3R_STATIC_INITIAL})
|
||||
option(SLIC3R_GUI "Compile SuperSlicer with GUI components (OpenGL, wxWidgets)" 1)
|
||||
option(SLIC3R_FHS "Assume SuperSlicer is to be installed in a FHS directory structure" 0)
|
||||
option(SLIC3R_STATIC "Compile Slic3r with static libraries (Boost, TBB, glew)" ${SLIC3R_STATIC_INITIAL})
|
||||
option(SLIC3R_GUI "Compile Slic3r with GUI components (OpenGL, wxWidgets)" 1)
|
||||
option(SLIC3R_FHS "Assume Slic3r is to be installed in a FHS directory structure" 0)
|
||||
option(SLIC3R_WX_STABLE "Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on Linux" 0)
|
||||
option(SLIC3R_PROFILE "Compile SuperSlicer with an invasive Shiny profiler" 0)
|
||||
option(SLIC3R_PROFILE "Compile Slic3r with an invasive Shiny profiler" 0)
|
||||
option(SLIC3R_PCH "Use precompiled headers" 1)
|
||||
option(SLIC3R_MSVC_COMPILE_PARALLEL "Compile on Visual Studio in parallel" 1)
|
||||
option(SLIC3R_MSVC_PDB "Generate PDB files on MSVC in Release mode" 1)
|
||||
@ -42,7 +42,7 @@ endif ()
|
||||
|
||||
# Proposal for C++ unit tests and sandboxes
|
||||
option(SLIC3R_BUILD_SANDBOXES "Build development sandboxes" OFF)
|
||||
option(SLIC3R_BUILD_TESTS "Build unit tests" ON)
|
||||
option(SLIC3R_BUILD_TESTS "Build unit tests" OFF)
|
||||
|
||||
# Print out the SLIC3R_* cache options
|
||||
get_cmake_property(_cache_vars CACHE_VARIABLES)
|
||||
@ -239,13 +239,13 @@ add_definitions(-DwxUSE_UNICODE -D_UNICODE -DUNICODE -DWXINTL_NO_GETTEXT_MACRO)
|
||||
add_definitions(-DwxNO_UNSAFE_WXSTRING_CONV)
|
||||
|
||||
if (SLIC3R_PROFILE)
|
||||
message("SuperSlicer will be built with a Shiny invasive profiler")
|
||||
message("Slic3r will be built with a Shiny invasive profiler")
|
||||
add_definitions(-DSLIC3R_PROFILE)
|
||||
endif ()
|
||||
|
||||
# Disable optimization even with debugging on.
|
||||
if (0)
|
||||
message(STATUS "Perl compiled without optimization. Disabling optimization for the SuperSlicer build.")
|
||||
message(STATUS "Perl compiled without optimization. Disabling optimization for the Slic3r build.")
|
||||
message("Old CMAKE_CXX_FLAGS_RELEASE: ${CMAKE_CXX_FLAGS_RELEASE}")
|
||||
message("Old CMAKE_CXX_FLAGS_RELWITHDEBINFO: ${CMAKE_CXX_FLAGS_RELEASE}")
|
||||
message("Old CMAKE_CXX_FLAGS: ${CMAKE_CXX_FLAGS_RELEASE}")
|
||||
@ -425,7 +425,7 @@ set(L10N_DIR "${SLIC3R_RESOURCES_DIR}/localization")
|
||||
add_custom_target(gettext_make_pot
|
||||
COMMAND xgettext --keyword=L --keyword=_L --keyword=_u8L --keyword=L_CONTEXT:1,2c --keyword=_L_PLURAL:1,2 --add-comments=TRN --from-code=UTF-8 --debug
|
||||
-f "${L10N_DIR}/list.txt"
|
||||
-o "${L10N_DIR}/SuperSlicer.pot"
|
||||
-o "${L10N_DIR}/Slic3r.pot"
|
||||
WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
|
||||
COMMENT "Generate pot file from strings in the source tree"
|
||||
)
|
||||
@ -433,10 +433,10 @@ add_custom_target(gettext_po_to_mo
|
||||
WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
|
||||
COMMENT "Generate localization po files (binary) from mo files (texts)"
|
||||
)
|
||||
file(GLOB L10N_PO_FILES "${L10N_DIR}/*/SuperSlicer*.po")
|
||||
file(GLOB L10N_PO_FILES "${L10N_DIR}/*/Slic3r*.po")
|
||||
foreach(po_file ${L10N_PO_FILES})
|
||||
GET_FILENAME_COMPONENT(po_dir "${po_file}" DIRECTORY)
|
||||
SET(mo_file "${po_dir}/SuperSlicer.mo")
|
||||
SET(mo_file "${po_dir}/Slic3r.mo")
|
||||
add_custom_command(
|
||||
TARGET gettext_po_to_mo PRE_BUILD
|
||||
COMMAND msgfmt ARGS -o ${mo_file} ${po_file}
|
||||
@ -490,9 +490,9 @@ function(prusaslicer_copy_dlls target)
|
||||
endfunction()
|
||||
|
||||
|
||||
# libslic3r, SuperSlicer GUI and the SuperSlicer executable.
|
||||
# libslic3r, Slic3r GUI and the Slic3r executable.
|
||||
add_subdirectory(src)
|
||||
set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT SuperSlicer_app_console)
|
||||
set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT Slic3r_app_console)
|
||||
|
||||
# Perl bindings, currently only used for the unit / integration tests of libslic3r.
|
||||
# Also runs the unit / integration tests.
|
||||
@ -515,16 +515,46 @@ if (WIN32)
|
||||
install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")
|
||||
elseif (SLIC3R_FHS)
|
||||
# CMAKE_INSTALL_FULL_DATAROOTDIR: read-only architecture-independent data root (share)
|
||||
set(SLIC3R_FHS_RESOURCES "${CMAKE_INSTALL_FULL_DATAROOTDIR}/SuperSlicer")
|
||||
set(SLIC3R_FHS_RESOURCES "${CMAKE_INSTALL_FULL_DATAROOTDIR}/Slic3r")
|
||||
install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${SLIC3R_FHS_RESOURCES}")
|
||||
install(FILES src/platform/unix/SuperSlicer.desktop DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/applications)
|
||||
install(FILES src/platform/unix/SuperGcodeviewer.desktop DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/applications)
|
||||
install(FILES resources/icons/Slic3r_192px.png DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/pixmaps RENAME SuperSlicer.png)
|
||||
install(FILES resources/icons/PrusaSlicer-gcodeviewer_192px.png DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/pixmaps RENAME SuperSlicer-gcodeviewer.png)
|
||||
install(FILES src/platform/unix/Slic3r.desktop DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/applications)
|
||||
install(FILES src/platform/unix/Gcodeviewer.desktop DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/applications)
|
||||
install(FILES resources/icons/Slic3r_192px.png DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/pixmaps RENAME Slic3r.png)
|
||||
install(FILES resources/icons/PrusaSlicer-gcodeviewer_192px.png DESTINATION ${CMAKE_INSTALL_FULL_DATAROOTDIR}/pixmaps RENAME Slic3r-gcodeviewer.png)
|
||||
else ()
|
||||
install(FILES src/platform/unix/SuperSlicer.desktop DESTINATION ${CMAKE_INSTALL_PREFIX}/resources/applications)
|
||||
install(FILES src/platform/unix/SuperGcodeviewer.desktop DESTINATION ${CMAKE_INSTALL_PREFIX}/resources/applications)
|
||||
install(FILES src/platform/unix/Slic3r.desktop DESTINATION ${CMAKE_INSTALL_PREFIX}/resources/applications)
|
||||
install(FILES src/platform/unix/Gcodeviewer.desktop DESTINATION ${CMAKE_INSTALL_PREFIX}/resources/applications)
|
||||
install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")
|
||||
endif ()
|
||||
|
||||
configure_file(${LIBDIR}/platform/unix/fhs.hpp.in ${LIBDIR_BIN}/platform/unix/fhs.hpp)
|
||||
|
||||
if (WIN32)
|
||||
else ()
|
||||
set(CPACK_GENERATOR "STGZ;TGZ;TZ")
|
||||
set(CPACK_NSIS_DISPLAY_NAME "Slic3r 2.0")
|
||||
set(CPACK_OUTPUT_CONFIG_FILE "${CMAKE_SOURCE_DIR}/cmake/CPackConfig.cmake")
|
||||
set(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/README.md")
|
||||
set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "CMake is a build tool")
|
||||
set(CPACK_PACKAGE_EXECUTABLES "Slic3r")
|
||||
set(CPACK_PACKAGE_FILE_NAME "slic3r-2.0-Linux-x86_64")
|
||||
set(CPACK_PACKAGE_INSTALL_DIRECTORY "Slic3r 2.0")
|
||||
set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "Slic3r 2.0.0")
|
||||
set(CPACK_PACKAGE_NAME "Slic3r")
|
||||
set(CPACK_PACKAGE_VENDOR "Slic3r")
|
||||
set(CPACK_PACKAGE_VERSION "2.0.0")
|
||||
set(CPACK_PACKAGE_VERSION_MAJOR "2")
|
||||
set(CPACK_PACKAGE_VERSION_MINOR "0")
|
||||
set(CPACK_PACKAGE_VERSION_PATCH "0")
|
||||
set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/LICENSE")
|
||||
set(CPACK_RESOURCE_FILE_README "${CMAKE_CURRENT_SOURCE_DIR}/README.md")
|
||||
set(CPACK_RESOURCE_FILE_WELCOME "${CMAKE_CURRENT_SOURCE_DIR}/README.md")
|
||||
set(CPACK_SOURCE_GENERATOR "TGZ;TZ")
|
||||
set(CPACK_SOURCE_PACKAGE_FILE_NAME "Slic3r-2.0.0")
|
||||
set(CPACK_SOURCE_STRIP_FILES "")
|
||||
set(CPACK_STRIP_FILES "bin/Slic3r")
|
||||
set(CPACK_SYSTEM_NAME "Linux-x86_64")
|
||||
set(CPACK_TOPLEVEL_TAG "Linux-x86_64")
|
||||
endif()
|
||||
|
||||
include(CPack)
|
||||
|
||||
142
README.md
142
README.md
@ -1,109 +1,93 @@
|
||||
 Slic3r [](https://travis-ci.org/slic3r/Slic3r) [](https://ci.appveyor.com/project/lordofhyphens/slic3r) [](http://osx-build.slic3r.org:8080/job/Slic3r)
|
||||
======
|
||||
|
||||
[](https://discord.gg/ygBBdRRwJY)
|
||||
We have automated builds for Windows (64-bit) and OSX (>= 10.7). [Get a fresh build now](http://dl.slic3r.org/dev/) and stay up-to-date with the development!
|
||||
|
||||
# SuperSlicer
|
||||
The MacOS X build server is kindly sponsored by: <img width=150 src=https://cloud.githubusercontent.com/assets/31754/22719818/09998c92-ed6d-11e6-9fa0-09de638f3a36.png />
|
||||
|
||||
**A PrusaSlicer fork (which is a slic3r fork)** (previously Slic3r++)
|
||||
### So, what's this Slic3r?
|
||||
|
||||
Prebuilt Windows, Linux and macOS 64-bit releases are available through the [git releases page](https://github.com/supermerill/SuperSlicer/releases). The Linux & macOS builds aren't tested (by me), just compiled, so please report any bugs that may occur during use.
|
||||
Nightly builds are available through the [git actions page](https://github.com/supermerill/SuperSlicer/actions). Click on the build for your platform and then on 'Artifacts (1)' in the top right corner.
|
||||
Slic3r is mainly a **toolpath generator** for 3D printers: it reads 3D models (STL, OBJ, AMF, 3MF) and it converts them into **G-code** instructions for 3D printers. But it does much more than that, see the [features list](#features) below.
|
||||
|
||||
SuperSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code
|
||||
instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain which is running a firmware based on Marlin, Prusa, Klipper, etc.
|
||||
Slic3r was born in **2011** within the RepRap community and thanks to its high configurability became the swiss-army knife for 3D printing. It served as a platform for implementing several **new (experimental) ideas that later became technology standards**, such as multiple extruders, brim, variable-height layers, per-object settings, modifiers, post-processing scripts, G-code macros and more. Despite being based on volunteer efforts, Slic3r is still pushing the boundaries of 3D printing.
|
||||
|
||||
SuperSlicer is based on [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research.
|
||||
PrusaSlicer is based on [Slic3r](https://github.com/Slic3r/Slic3r) by Alessandro Ranellucci and the RepRap community.
|
||||
Slic3r has been rebased from the active PrusaSlicer and SuperSlicer forks with an eye towards continuing pushing the boundaries of 3D printing and being an slicer for all printers.
|
||||
|
||||
See the [wiki](https://github.com/supermerill/SuperSlicer/wiki) and
|
||||
the [documentation directory](doc/) for information about compilation.
|
||||
Slic3r is:
|
||||
|
||||
### What are SuperSlicer main features? main new features/differences?
|
||||
* **Open:** it is totally **open source** and it's **independent from any commercial company** or printer manufacturer. We want to keep 3D printing open and free.
|
||||
* **Compatible:** it supports all the known G-code dialects (Marlin, Repetier, Mach3, LinuxCNC, Machinekit, Smoothie, Makerware, Sailfish).
|
||||
* **Advanced:** many configuration options allow for fine-tuning and full control. While novice users often need just few options, Slic3r is mostly used by advanced users.
|
||||
* **Community-driven:** new features or issues are discussed in the [GitHub repository](https://github.com/slic3r/Slic3r/issues). Join our collaborative effort and help improve it!
|
||||
* **Robust:** the codebase includes more than 1,000 unit and regression tests, collected in 6 years of development.
|
||||
* **Modular:** the core of Slic3r is libslic3r, a C++ library that provides a granular API and reusable components.
|
||||
* **Embeddable:** a complete and powerful command line interface allows Slic3r to be used from the shell or integrated with server-side applications.
|
||||
* **Powerful:** see the list below!
|
||||
|
||||
* Custom-made generated calibration tests.
|
||||
* **Ironing** top surface & many new settings to fine-tune the top surface quality, like 'only one perimeter on top'.
|
||||
* A "denser infill" option for supporting the (solid) top layers.
|
||||
* Better **Thin walls** (anchored inside the print, no more random bits at the ends, embedded in perimeter loops).
|
||||
* Options to change holes dimensions and/or geometry, to print them at the right size.
|
||||
* Better overhangs (add perimeters if needed, slice them in opposite direction each layer).
|
||||
* Brim rework: many more options (inside, outside only, 'ears', per object)
|
||||
* Some new seam options, to help hide them.
|
||||
* Built-in calibration prints
|
||||
* Built-in object generation script
|
||||
* Can join perimeters into a big one to avoid travel moves.
|
||||
* Many other little options and corrections (like the filled concentric pattern).
|
||||
* It has also all the current slic3rPE/PrusaSlicer features.
|
||||
See the [project homepage](http://slic3r.org/) at slic3r.org for more information.
|
||||
|
||||
### Complete changelog [here](https://github.com/supermerill/SuperSlicer/wiki)
|
||||
### <a name="features"></a>Features
|
||||
|
||||
See the wiki for examples.
|
||||
(Most of these are also available in the command line interface.)
|
||||
|
||||
### What are SuperSlicer / PrusaSlicer / Slic3r's main features?
|
||||
|
||||
Key features are:
|
||||
|
||||
* **Multi-platform** (Linux/Mac/Win) and packaged as standalone-app with no dependencies required
|
||||
* Complete **command-line interface** to use it without GUI
|
||||
* Multi-material **(multiple extruders)** object printing
|
||||
* Multiple G-code flavors supported (RepRap, Makerbot, Mach3, Machinekit, etc.)
|
||||
* Ability to plate **multiple objects having distinct print settings**
|
||||
* **Multithread** processing
|
||||
* **STL auto-repair** (tolerance for broken models)
|
||||
* Wide automated unit testing
|
||||
|
||||
Other major features are:
|
||||
|
||||
* Combine infill every 'n' perimeters layer & varying density to speed up printing
|
||||
* **3D preview** (including multi-material files)
|
||||
* **Multiple layer heights** in a single print
|
||||
* **Spiral vase** mode for bumpless vases
|
||||
* Fine adjustment of speed, acceleration, and extrusion width
|
||||
* Several infill patterns including honeycomb, spirals, Hilbert curves, gyroid
|
||||
* Support material, raft, brim, skirt
|
||||
* **Standby temperature** and automatic wiping for multi-extruder printing
|
||||
* [Customizable **G-code macros**](https://github.com/prusa3d/PrusaSlicer/wiki/Slic3r-Prusa-Edition-Macro-Language) and output filename with variable placeholders
|
||||
* Support for **post-processing scripts**
|
||||
* **Cooling logic** controlling fan speed and dynamic print speed
|
||||
|
||||
[Command-Line Interface](https://github.com/prusa3d/PrusaSlicer/wiki/Command-Line-Interface) wiki page.
|
||||
|
||||
## Development
|
||||
* **G-code generation** for FFF/FDM printers;
|
||||
* **conversion** between STL, OBJ, AMF, 3MF and POV formats;
|
||||
* **auto-repair** of non-manifold meshes (and ability to re-export them);
|
||||
* **SVG export** of slices;
|
||||
* built-in **USB/serial** host controller, supporting **multiple simultaneous printers** each one with a spool queue;
|
||||
* **OctoPrint integration** (send to printer);
|
||||
* built-in **projector and host for DLP printers**;
|
||||
* tool for **cutting meshes** in multiple solid parts with visual preview (also in batch using a grid);
|
||||
* tool for **extruding 2.5D TIN meshes**.
|
||||
|
||||
### What language is it written in?
|
||||
|
||||
Almost everything is written in C++.
|
||||
The core parts of Slic3r are written in C++11, with multithreading. The graphical interface is in the process of being ported to C++14.
|
||||
|
||||
The slicing core is the `libslic3r` library, which can be built and used in a standalone way.
|
||||
The command-line interface is a thin wrapper over `libslic3r`.
|
||||
You can download a precompiled package from the release page - it will run without the need for any dependency.
|
||||
### How to install?
|
||||
|
||||
### How to compile
|
||||
You can download a precompiled package from [slic3r.org](http://slic3r.org/) (releases) or from [dl.slicr3r.org](http://dl.slic3r.org/dev/) (automated builds).
|
||||
|
||||
If you want to compile the source yourself, follow the instructions on one of
|
||||
these documentation pages:
|
||||
* [Linux](doc/How%20to%20build%20-%20Linux%20et%20al.md)
|
||||
* [macOS](doc/How%20to%20build%20-%20Mac%20OS.md)
|
||||
* [Windows](doc/How%20to%20build%20-%20Windows.md)
|
||||
|
||||
You can also look at the workflow YAML-files for [git actions](https://github.com/supermerill/Slic3r/tree/master/.github/workflows), as they describe how to build from source from a "virgin" dev computer.
|
||||
If you want to compile the source yourself follow the instructions on one of these wiki pages:
|
||||
* [Linux](https://github.com/slic3r/Slic3r/wiki/Running-Slic3r-from-git-on-GNU-Linux)
|
||||
* [Windows](https://github.com/slic3r/Slic3r/wiki/Running-Slic3r-from-git-on-Windows)
|
||||
* [Mac OSX](https://github.com/slic3r/Slic3r/wiki/Running-Slic3r-from-git-on-OS-X)
|
||||
|
||||
### Can I help?
|
||||
|
||||
Sure! You can do the following to find things that are available to help with:
|
||||
* Add an issue to the GitHub tracker **if it isn't already present**.
|
||||
Sure, but please read the
|
||||
[CONTRIBUTING](https://github.com/slic3r/Slic3r/blob/master/.github/CONTRIBUTING.md)
|
||||
document first!
|
||||
|
||||
Before sending patches and pull requests contact me (preferably through opening a GitHub issue or commenting on an existing, related, issue) to discuss your proposed
|
||||
changes. This way we can ensure that nobody wastes their time and no conflicts arise in development.
|
||||
### Directory structure
|
||||
|
||||
## License and attribution
|
||||
* `package/`: the scripts used for packaging the executables
|
||||
* `src/`: the C++ source of the `slic3r` executable and the CMake definition file for compiling it
|
||||
* `src/slic3r/GUI`: The C++ GUI.
|
||||
* `tests`: Test suite for Slic3r. Implemented with [Catch2](https://github.com/catchorg/Catch2)
|
||||
* `t/`: the really old test suite (deprecated)
|
||||
* `utils/`: various useful scripts
|
||||
* `src/libslic3r/`: C++ sources for libslic3r
|
||||
* `xs/xsp/`: bindings for calling libslic3r from Perl (XS) (deprecated)
|
||||
|
||||
SuperSlicer is licensed under the _GNU Affero General Public License, version 3_.
|
||||
SuperSlicer is based on PrusaSlicer by PrusaResearch.
|
||||
## Licensing and attribution
|
||||
|
||||
Slic3r is licensed under the _GNU Affero General Public License, version 3_.
|
||||
|
||||
PrusaSlicer is licensed under the _GNU Affero General Public License, version 3_.
|
||||
PrusaSlicer is owned by Prusa Research.
|
||||
PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci.
|
||||
|
||||
Slic3r is licensed under the _GNU Affero General Public License, version 3_.
|
||||
Slic3r was created by Alessandro Ranellucci with the help of many other contributors.
|
||||
|
||||
The _GNU Affero General Public License, version 3_ ensures that if you **use** any part of this software in any way (even behind a web server), your software must be released under the same license.
|
||||
|
||||
### Acknowledgements
|
||||
|
||||
The main author of Slic3r is Alessandro Ranellucci (@alranel, *Sound* in IRC, [@alranel](http://twitter.com/alranel) on Twitter), who started the project in 2011.
|
||||
|
||||
Joseph Lenox (@lordofhyphens, *LoH* in IRC, [@LenoxPlay](http://twitter.com/LenoxPlay) on Twitter) is the current co-maintainer.
|
||||
|
||||
Contributions by Henrik Brix Andersen, Vojtech Bubnik, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Y. Sapir, Mike Sheldrake, Kliment Yanev and numerous others. Original manual by Gary Hodgson. Slic3r logo designed by Corey Daniels, <a href="http://www.famfamfam.com/lab/icons/silk/">Silk Icon Set</a> designed by Mark James, stl and gcode file icons designed by Akira Yasuda.
|
||||
|
||||
### How can I invoke Slic3r using the command line?
|
||||
|
||||
The command line is documented in the relevant [manual page](https://manual.slic3r.org/advanced/command-line).
|
||||
|
||||
@ -68,7 +68,7 @@ After verifying the result with the help of the table below, you have to modify
|
||||
Example: first step, i choose the -10, so i have ((100-10)/100) * 1 = (0.9) * 1 = 0.9<br />
|
||||
second step i choose +5, so i have ((100+5)/100) * 0.9 = (1.05) * 0.9 = 0.945
|
||||
</p>
|
||||
<p>If you want to make this change permanent and left your extrusion multiplier to 1 in SuperSlicer, you can change your firmware configuration by multiplying (or dividing, depends of the firmware/setting) the 'extruder speed setting' (e-step, step_distance) by this extrusion multiplier.</p>
|
||||
<p>If you want to make this change permanent and left your extrusion multiplier to 1 in Slic3r, you can change your firmware configuration by multiplying (or dividing, depends of the firmware/setting) the 'extruder speed setting' (e-step, step_distance) by this extrusion multiplier.</p>
|
||||
<h2>Advice</h2>
|
||||
<p>Before doing this test, it's preferable to calibrate your extruder (it's easier on bowden setup):</p>
|
||||
<ul>
|
||||
|
||||
@ -25,7 +25,7 @@
|
||||
<h3>Filament temperature calibration</h3>
|
||||
<p>Some filaments need more heat to stick, and some need less heat to prevent too much oozing or loose overhangs. This calibration is here to help you find a good value for the temperature. You can also do multiple trials with different fan speeds to try to find the best combination.</p>
|
||||
<h2>Slicer calibration</h2>
|
||||
<p>These calibrations are here to help you to find the best SuperSlicer settings that will go well with your printer and filament combination.</p>
|
||||
<p>These calibrations are here to help you to find the best Slic3r settings that will go well with your printer and filament combination.</p>
|
||||
<h3>Bridge flow calibration</h3>
|
||||
<p>Bridges are sometimes a bit hard to print with good look. This calibration will help you to choose the best setting for the bridge flow. You can also try with different values of bridge fan speed.</p>
|
||||
<h3>Ironing pattern calibration</h3>
|
||||
|
||||
@ -3,8 +3,8 @@
|
||||
## 1) initialisation
|
||||
open the settings.ini
|
||||
for each file that can contains useful translation, create / edit a "data" line to point to the said file.
|
||||
The 'input' property must be the SuperSlicer.pot path
|
||||
The 'output' must be the SuperSlicer.po
|
||||
The 'input' property must be the Slic3r.pot path
|
||||
The 'output' must be the Slic3r.po
|
||||
The 'todo' contains the path of the po file to complete.
|
||||
|
||||
note that the first data line has the priority over the other ones (the first translation encountered is the one used)
|
||||
@ -16,9 +16,9 @@ So the settings.ini contains these lines :
|
||||
data = es/Slic3r++.po
|
||||
data = es/PrusaSlicer_es.po
|
||||
|
||||
input = SuperSlicer.pot
|
||||
input = Slic3r.pot
|
||||
todo = es/todo.po
|
||||
output = es/SuperSlicer.po
|
||||
output = es/Slic3r.po
|
||||
```
|
||||
|
||||
## 2) launch the utility.
|
||||
@ -43,13 +43,13 @@ After filling the todo file, change the settings.ini:
|
||||
|
||||
```
|
||||
data = es/todo.po
|
||||
data = es/SuperSlicer.po
|
||||
data = es/Slic3r.po
|
||||
data = es/Slic3r++.po
|
||||
data = es/PrusaSlicer_es.po
|
||||
|
||||
input = SuperSlicer.pot
|
||||
input = Slic3r.pot
|
||||
todo = es/todo.po
|
||||
output = es/SuperSlicer.po
|
||||
output = es/Slic3r.po
|
||||
```
|
||||
|
||||
And re-launch the utility.
|
||||
|
||||
@ -53,12 +53,6 @@ msgstr ""
|
||||
msgid "GNU Affero General Public License, version 3"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/AboutDialog.cpp:265
|
||||
msgid ""
|
||||
"SuperSlicer is based on PrusaSlicer which is based on Slic3r by Alessandro "
|
||||
"Ranellucci and the RepRap community."
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/AboutDialog.cpp:266
|
||||
msgid ""
|
||||
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
|
||||
@ -534,7 +528,7 @@ msgid "Active"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
|
||||
msgid "SuperSlicer version"
|
||||
msgid "Slic3r version"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1506
|
||||
@ -567,11 +561,11 @@ msgid "version"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67
|
||||
msgid "min SuperSlicer version"
|
||||
msgid "min Slic3r version"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
|
||||
msgid "max SuperSlicer version"
|
||||
msgid "max Slic3r version"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
|
||||
@ -771,11 +765,11 @@ msgid "Files association"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigWizard.cpp:1193 src/slic3r/GUI/Preferences.cpp:91
|
||||
msgid "Associate .3mf files to SuperSlicer"
|
||||
msgid "Associate .3mf files to Slic3r"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigWizard.cpp:1194 src/slic3r/GUI/Preferences.cpp:98
|
||||
msgid "Associate .stl files to SuperSlicer"
|
||||
msgid "Associate .stl files to Slic3r"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigWizard.cpp:1205
|
||||
@ -784,7 +778,7 @@ msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/ConfigWizard.cpp:1207
|
||||
msgid ""
|
||||
"SuperSlicer's user interfaces comes in three variants:\n"
|
||||
"Slic3r's user interfaces comes in three variants:\n"
|
||||
"Simple, Advanced, and Expert.\n"
|
||||
"The Simple mode shows only the most frequently used settings relevant for "
|
||||
"regular 3D printing. The other two offer progressively more sophisticated "
|
||||
@ -2519,12 +2513,6 @@ msgstr ""
|
||||
msgid "Add supports"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/GUI_App.cpp:242
|
||||
msgid ""
|
||||
"is based on PrusaSlicer by Prusa and Slic3r by Alessandro Ranellucci and the "
|
||||
"RepRap community."
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/GUI_App.cpp:244
|
||||
msgid ""
|
||||
"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra "
|
||||
@ -4230,7 +4218,7 @@ msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:154
|
||||
msgid ""
|
||||
"Remember to check for updates at https://github.com/supermerill/SuperSlicer/"
|
||||
"Remember to check for updates at https://github.com/supermerill/Slic3r/"
|
||||
"releases"
|
||||
msgstr ""
|
||||
|
||||
@ -4239,27 +4227,27 @@ msgid "based on PrusaSlicer & Slic3r"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:874
|
||||
msgid "SuperSlicer Releases"
|
||||
msgid "Slic3r Releases"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:874
|
||||
msgid "Open the SuperSlicer releases page in your browser"
|
||||
msgid "Open the Slic3r releases page in your browser"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:876
|
||||
msgid "SuperSlicer wiki"
|
||||
msgid "Slic3r wiki"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:876
|
||||
msgid "Open the SuperSlicer wiki in your browser"
|
||||
msgid "Open the Slic3r wiki in your browser"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:878
|
||||
msgid "SuperSlicer website"
|
||||
msgid "Slic3r website"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:878
|
||||
msgid "Open the SuperSlicer website in your browser"
|
||||
msgid "Open the Slic3r website in your browser"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:880
|
||||
@ -4883,11 +4871,11 @@ msgid "&Open G-code"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:1314
|
||||
msgid "Open &SuperSlicer"
|
||||
msgid "Open &Slic3r"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:1314
|
||||
msgid "Open SuperSlicer"
|
||||
msgid "Open Slic3r"
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:1359
|
||||
@ -5901,7 +5889,7 @@ msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:75
|
||||
msgid ""
|
||||
"If enabled, SuperSlicer will check for the new versions of itself online. "
|
||||
"If enabled, Slic3r will check for the new versions of itself online. "
|
||||
"When a new version becomes available a notification is displayed at the next "
|
||||
"application startup (never during program usage). This is only a "
|
||||
"notification mechanisms, no automatic installation is done."
|
||||
@ -5918,11 +5906,11 @@ msgid ""
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:93
|
||||
msgid "If enabled, sets SuperSlicer as default application to open .3mf files."
|
||||
msgid "If enabled, sets Slic3r as default application to open .3mf files."
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:100
|
||||
msgid "If enabled, sets SuperSlicer as default application to open .stl files."
|
||||
msgid "If enabled, sets Slic3r as default application to open .stl files."
|
||||
msgstr ""
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:110
|
||||
@ -6835,7 +6823,7 @@ msgid ""
|
||||
"right of the Printer profiles combo box, by selecting the \"Add physical "
|
||||
"printer\" item in the Printer combo box. The Physical Printer profile editor "
|
||||
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
|
||||
"The Physical Printer profiles are being stored into SuperSlicer/"
|
||||
"The Physical Printer profiles are being stored into Slic3r/"
|
||||
"physical_printer directory."
|
||||
msgstr ""
|
||||
|
||||
|
||||
Binary file not shown.
@ -49,10 +49,6 @@ msgstr "est sous licence"
|
||||
msgid "GNU Affero General Public License, version 3"
|
||||
msgstr "GNU Affero Licence Publique Générale, version 3"
|
||||
|
||||
#: src/slic3r/GUI/AboutDialog.cpp:260
|
||||
msgid "SuperSlicer is based on PrusaSlicer which is based on Slic3r by Alessandro Ranellucci and the RepRap community."
|
||||
msgstr "SuperSlicer est basé sur PrusaSlicer qui est basé sur Slic3r d’Alessandro Ranellucci et de la communauté RepRap."
|
||||
|
||||
#: src/slic3r/GUI/AboutDialog.cpp:261
|
||||
msgid "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi and numerous others."
|
||||
msgstr "Contributions de Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi et de nombreux autres."
|
||||
@ -301,7 +297,7 @@ msgstr "Actif"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
|
||||
msgid "PrusaSlicer version"
|
||||
msgstr "Version SuperSlicer"
|
||||
msgstr "Version Slic3r"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1406
|
||||
msgid "print"
|
||||
@ -2729,28 +2725,28 @@ msgid "Right View"
|
||||
msgstr "Vue Droite"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:659
|
||||
msgid "SuperSlicer Releases"
|
||||
msgstr "Publication de la SuperSlicer"
|
||||
msgid "Slic3r Releases"
|
||||
msgstr "Publication de la Slic3r"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:659
|
||||
msgid "Open the SuperSlicer releases page in your browser"
|
||||
msgid "Open the Slic3r releases page in your browser"
|
||||
msgstr "Ouvrez la page des versions de slic3r ++ dans votre navigateur"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:661
|
||||
msgid "SuperSlicer wiki"
|
||||
msgstr "Wiki SuperSlicer"
|
||||
msgid "Slic3r wiki"
|
||||
msgstr "Wiki Slic3r"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:661
|
||||
msgid "Open the SuperSlicer wiki in your browser"
|
||||
msgstr "Ouvrez le wiki SuperSlicer dans votre navigateur"
|
||||
msgid "Open the Slic3r wiki in your browser"
|
||||
msgstr "Ouvrez le wiki Slic3r dans votre navigateur"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:663
|
||||
msgid "SuperSlicer website"
|
||||
msgstr "Site web SuperSlicer"
|
||||
msgid "Slic3r website"
|
||||
msgstr "Site web Slic3r"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:663
|
||||
msgid "Open the SuperSlicer website in your browser"
|
||||
msgstr "Ouvrez le site web SuperSlicer dans votre navigateur"
|
||||
msgid "Open the Slic3r website in your browser"
|
||||
msgstr "Ouvrez le site web Slic3r dans votre navigateur"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:665
|
||||
msgid "Prusa Edition website"
|
||||
@ -3523,7 +3519,7 @@ msgid "If this is enabled, Slic3r will pre-process objects as soon as they're lo
|
||||
msgstr "Si ceci est activé, Slic3r va pré-calculer les objets dès qu'ils sont chargés pour gagner du temps lors de l'export du G-code."
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:71
|
||||
msgid "If enabled, SuperSlicer will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
|
||||
msgid "If enabled, Slic3r will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
|
||||
msgstr "Si activé, Slic3r ++ recherchera les nouvelles versions de lui-même en ligne. Lorsqu'une nouvelle version devient disponible, une notification est affichée au prochain démarrage de l'application (jamais pendant l'utilisation du programme). Il s’agit uniquement d’un mécanisme de notification, aucune installation automatique n’est effectuée."
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:79
|
||||
@ -6060,7 +6056,7 @@ msgid ""
|
||||
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r keeps adding perimeters, until more than 70% of the loop immediately above is supported, and keep adding periemter until all overhangs are filled.\n"
|
||||
"!! this is a very slow algorithm !!"
|
||||
msgstr ""
|
||||
"Ajoutez davantage de périmètres si nécessaire pour éviter des trous dans les pentes. SuperSlicer continue d'ajouter des périmètres jusqu'à ce que plus de 70% de la boucle ci-dessus soit prise en charge, et continue d'ajouter des périmètres jusqu'à ce que tous les surplombs soient remplis.\n"
|
||||
"Ajoutez davantage de périmètres si nécessaire pour éviter des trous dans les pentes. Slic3r continue d'ajouter des périmètres jusqu'à ce que plus de 70% de la boucle ci-dessus soit prise en charge, et continue d'ajouter des périmètres jusqu'à ce que tous les surplombs soient remplis.\n"
|
||||
" !! c'est un algorithme très lent !!"
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:699
|
||||
@ -6770,7 +6766,7 @@ msgstr "Ce code personnalisé est inséré à chaque changement de couche, juste
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:1566
|
||||
msgid "This custom code is inserted at every extrusion type change.Note that you can use placeholder variables for all Slic3r settings as well as [extrusion_role], [layer_num] and [layer_z] that can take these string values: { Perimeter, ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the role of the extrusion is not unique, not exactly inside an other category or not known."
|
||||
msgstr "Ce code personnalisé est inséré à chaque changement de type d'extrusion. Notez que vous pouvez utiliser des variables de substitution pour tous les paramètres SuperSlicer, ainsi que pour [layer_num], [layer_z] et [extrusion_role] pouvant prendre ces valeurs de chaîne: { Perimeter, ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, Mixed }. Mixed n'est utilisé que lorsque le rôle de l'extrusion n'est pas unique, pas uniquement dans une catégorie ou n'est pas connu."
|
||||
msgstr "Ce code personnalisé est inséré à chaque changement de type d'extrusion. Notez que vous pouvez utiliser des variables de substitution pour tous les paramètres Slic3r, ainsi que pour [layer_num], [layer_z] et [extrusion_role] pouvant prendre ces valeurs de chaîne: { Perimeter, ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, Mixed }. Mixed n'est utilisé que lorsque le rôle de l'extrusion n'est pas unique, pas uniquement dans une catégorie ou n'est pas connu."
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:1578
|
||||
msgid "Exact last layer height"
|
||||
@ -7217,7 +7213,7 @@ msgid ""
|
||||
"Note: slic3r simplify the geometry with a treshold of 0.0125mm and has an internal resolution of 0.0001mm."
|
||||
msgstr ""
|
||||
"Résolution minimale, utilisée pour simplifier le fichier d'entrée afin d'accélérer le travail de découpage et de réduire l'utilisation de la mémoire. Les modèles haute résolution comportent souvent plus de détails que les imprimantes. Définissez la valeur sur zéro pour désactiver toute simplification et utiliser la résolution complète de l'entrée.\n"
|
||||
"Remarque: SuperSlicer simplifie aussi la géométrie avec un seuil de 0.0125mm et une résolution interne de 0.0001mm."
|
||||
"Remarque: Slic3r simplifie aussi la géométrie avec un seuil de 0.0125mm et une résolution interne de 0.0001mm."
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:2121
|
||||
msgid "Minimum travel after retraction"
|
||||
@ -7644,7 +7640,7 @@ msgstr ""
|
||||
#: src/libslic3r/PrintConfig.cpp:2626
|
||||
#, c-format
|
||||
msgid "The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the extruding width used for the interface layers."
|
||||
msgstr "Distance verticale entre l’interface du support et l’objet (lorsque l’objet est imprimé sur le support). Définir ce paramètre à 0 empêchera également SuperSlicer d’utiliser le flux et la vitesse de pont pour le premier calque d’objet. Peut être un% de la largeur d'extrusion utilisée pour les couches d'interface."
|
||||
msgstr "Distance verticale entre l’interface du support et l’objet (lorsque l’objet est imprimé sur le support). Définir ce paramètre à 0 empêchera également Slic3r d’utiliser le flux et la vitesse de pont pour le premier calque d’objet. Peut être un% de la largeur d'extrusion utilisée pour les couches d'interface."
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:2631
|
||||
msgid "detachable"
|
||||
@ -7805,7 +7801,7 @@ msgstr "Permettre aux périmètres externe de se chevaucher pour éviter l'utili
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:2839
|
||||
msgid "Detect single-width walls (parts where two extrusions don't fit and we need to collapse them into a single trace). If unchecked, slic3r may try to fit perimeters where it's not possible, creating some overlap leading to over-extrusion."
|
||||
msgstr "Détecter les parois extrudable par une seule passe (parois minces) (pièces dans lesquelles deux extrusions ne rentrent pas et nous devons les réduire en une seule trace). Si cette case n'est pas cochée, SuperSlicer peut essayer d’adapter les périmètres là où ce n’est pas possible, créant ainsi un chevauchement conduisant à une sur-extrusion."
|
||||
msgstr "Détecter les parois extrudable par une seule passe (parois minces) (pièces dans lesquelles deux extrusions ne rentrent pas et nous devons les réduire en une seule trace). Si cette case n'est pas cochée, Slic3r peut essayer d’adapter les périmètres là où ce n’est pas possible, créant ainsi un chevauchement conduisant à une sur-extrusion."
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:2846
|
||||
msgid "min width"
|
||||
@ -7950,7 +7946,7 @@ msgstr "Activer le calcul de volume de purge avancé"
|
||||
#: src/libslic3r/PrintConfig.cpp:3010
|
||||
#, c-format
|
||||
msgid "Allow slic3r to compute the purge volume via smart computations. Use the pigment% of each filament and following parameters"
|
||||
msgstr "Autorisez SuperSlicer à calculer le volume de purge via des calculs intelligents. Utilisez le pourcentage de pigment de chaque filament et les paramètres suivants"
|
||||
msgstr "Autorisez Slic3r à calculer le volume de purge via des calculs intelligents. Utilisez le pourcentage de pigment de chaque filament et les paramètres suivants"
|
||||
|
||||
#: src/libslic3r/PrintConfig.cpp:3015
|
||||
msgid "Nozzle volume"
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -49,17 +49,13 @@ msgstr "è concesso in licenza ai sensi"
|
||||
msgid "GNU Affero General Public License, version 3"
|
||||
msgstr "GNU Affero General Public License, versione 3"
|
||||
|
||||
#: src/slic3r/GUI/AboutDialog.cpp:262
|
||||
msgid "SuperSlicer is based on PrusaSlicer which is based on Slic3r by Alessandro Ranellucci and the RepRap community."
|
||||
msgstr "SuperSlicer è basato su PrusaSlicer che si basa su Slic3r di Alessandro Ranellucci e la comunità RepRap."
|
||||
|
||||
#: src/slic3r/GUI/AboutDialog.cpp:263
|
||||
msgid "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi and numerous others."
|
||||
msgstr "Contributi di Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi e molti altri."
|
||||
|
||||
#: src/slic3r/GUI/AppConfig.cpp:120
|
||||
msgid "Error parsing SuperSlicer config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected."
|
||||
msgstr "Errore durante l'analisi del file di configurazione SuperSlicer, probabilmente danneggiato. Provare a eliminare manualmente il file per recuperare dall'errore. I profili utente non saranno interessati."
|
||||
msgid "Error parsing Slic3r config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected."
|
||||
msgstr "Errore durante l'analisi del file di configurazione Slic3r, probabilmente danneggiato. Provare a eliminare manualmente il file per recuperare dall'errore. I profili utente non saranno interessati."
|
||||
|
||||
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:109
|
||||
msgid "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?"
|
||||
@ -491,8 +487,8 @@ msgid "Active"
|
||||
msgstr "Attivo"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
|
||||
msgid "SuperSlicer version"
|
||||
msgstr "SuperSlicer version"
|
||||
msgid "Slic3r version"
|
||||
msgstr "Slic3r version"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1718
|
||||
msgid "print"
|
||||
@ -515,12 +511,12 @@ msgid "version"
|
||||
msgstr "versione"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
|
||||
msgid "min SuperSlicer version"
|
||||
msgstr "min SuperSlicer version"
|
||||
msgid "min Slic3r version"
|
||||
msgstr "min Slic3r version"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
|
||||
msgid "max SuperSlicer version"
|
||||
msgstr "max SuperSlicer versione"
|
||||
msgid "max Slic3r version"
|
||||
msgstr "max Slic3r versione"
|
||||
|
||||
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
|
||||
msgid "model"
|
||||
@ -684,11 +680,11 @@ msgstr "Modalità Visualizzazione"
|
||||
|
||||
#: src/slic3r/GUI/ConfigWizard.cpp:837
|
||||
msgid ""
|
||||
"SuperSlicer's user interfaces comes in three variants:\n"
|
||||
"Slic3r's user interfaces comes in three variants:\n"
|
||||
"Simple, Advanced, and Expert.\n"
|
||||
"The Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively."
|
||||
msgstr ""
|
||||
"Le interfacce utente di SuperSlicer sono disponibili in tre varianti:\n"
|
||||
"Le interfacce utente di Slic3r sono disponibili in tre varianti:\n"
|
||||
"Semplice, avanzato ed esperto.\n"
|
||||
"La modalità Semplice mostra solo le impostazioni utilizzate più di frequente rilevanti per la normale stampa 3D. Gli altri due offrono una messa a punto progressivamente più sofisticata, sono adatti rispettivamente per utenti avanzati ed esperti."
|
||||
|
||||
@ -1656,10 +1652,10 @@ msgstr "Rimuovi selezione da rettangolo"
|
||||
#: src/slic3r/GUI/GLCanvas3DManager.cpp:306
|
||||
#, c-format
|
||||
msgid ""
|
||||
"SuperSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
|
||||
"Slic3r requires OpenGL 2.0 capable graphics driver to run correctly, \n"
|
||||
"while OpenGL version %s, render %s, vendor %s was detected."
|
||||
msgstr ""
|
||||
"SuperSlicer richiede il corretto funzionamento del driver di grafica OpenGL 2.0, \n"
|
||||
"Slic3r richiede il corretto funzionamento del driver di grafica OpenGL 2.0, \n"
|
||||
"mentre è stata rilevata la versione OpenGL %s, il rendering %s è stato rilevato."
|
||||
|
||||
#: src/slic3r/GUI/GLCanvas3DManager.cpp:309
|
||||
@ -1667,8 +1663,8 @@ msgid "You may need to update your graphics card driver."
|
||||
msgstr "Dovresti aggiornare i driver della scheda video."
|
||||
|
||||
#: src/slic3r/GUI/GLCanvas3DManager.cpp:312
|
||||
msgid "As a workaround, you may run SuperSlicer with a software rendered 3D graphics by running prusa-slicer.exe with the --sw_renderer parameter."
|
||||
msgstr "Come soluzione alternativa, è possibile eseguire SuperSlicer con una grafica 3D sottoposta a rendering software eseguendo prusa-slicer.exe con il parametro --sw_renderer.</a0>"
|
||||
msgid "As a workaround, you may run Slic3r with a software rendered 3D graphics by running prusa-slicer.exe with the --sw_renderer parameter."
|
||||
msgstr "Come soluzione alternativa, è possibile eseguire Slic3r con una grafica 3D sottoposta a rendering software eseguendo prusa-slicer.exe con il parametro --sw_renderer.</a0>"
|
||||
|
||||
#: src/slic3r/GUI/GLCanvas3DManager.cpp:314
|
||||
msgid "Unsupported OpenGL version"
|
||||
@ -3836,28 +3832,28 @@ msgid "How to use the FreeCad python script window."
|
||||
msgstr "Come utilizzare la finestra di script Python di FreeCad."
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:801
|
||||
msgid "SuperSlicer Releases"
|
||||
msgstr "Rilasci di SuperSlicer"
|
||||
msgid "Slic3r Releases"
|
||||
msgstr "Rilasci di Slic3r"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:801
|
||||
msgid "Open the SuperSlicer releases page in your browser"
|
||||
msgstr "Apri la pagina delle versioni di SuperSlicer nel tuo browser"
|
||||
msgid "Open the Slic3r releases page in your browser"
|
||||
msgstr "Apri la pagina delle versioni di Slic3r nel tuo browser"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:803
|
||||
msgid "SuperSlicer wiki"
|
||||
msgstr "SuperSlicer wiki"
|
||||
msgid "Slic3r wiki"
|
||||
msgstr "Slic3r wiki"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:803
|
||||
msgid "Open the SuperSlicer wiki in your browser"
|
||||
msgstr "Apri il wiki di SuperSlicer nel tuo browser"
|
||||
msgid "Open the Slic3r wiki in your browser"
|
||||
msgstr "Apri il wiki di Slic3r nel tuo browser"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:805
|
||||
msgid "SuperSlicer website"
|
||||
msgstr "SuperSlicer website"
|
||||
msgid "Slic3r website"
|
||||
msgstr "Slic3r website"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:805
|
||||
msgid "Open the SuperSlicer website in your browser"
|
||||
msgstr "Apri il sito Web SuperSlicer nel tuo browser"
|
||||
msgid "Open the Slic3r website in your browser"
|
||||
msgstr "Apri il sito Web Slic3r nel tuo browser"
|
||||
|
||||
#: src/slic3r/GUI/MainFrame.cpp:807
|
||||
msgid "Prusa Edition website"
|
||||
@ -4738,8 +4734,8 @@ msgid "If this is enabled, Slic3r will pre-process objects as soon as they're lo
|
||||
msgstr "Se attivo, Slic3r processerà in anticipo gli oggetti non appena saranno caricati, così da risparmiare tempo durante l'esportazione del G-code."
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:66
|
||||
msgid "If enabled, SuperSlicer will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
|
||||
msgstr "Se abilitata, SuperSlicer tiche' per le nuove versioni di se stesso online. Quando una nuova versione diventa disponibile, viene visualizzata una notifica all'avvio successivo dell'applicazione (mai durante l'utilizzo del programma). Questo è solo un meccanismo di notifica, non viene eseguita alcuna installazione automatica."
|
||||
msgid "If enabled, Slic3r will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
|
||||
msgstr "Se abilitata, Slic3r tiche' per le nuove versioni di se stesso online. Quando una nuova versione diventa disponibile, viene visualizzata una notifica all'avvio successivo dell'applicazione (mai durante l'utilizzo del programma). Questo è solo un meccanismo di notifica, non viene eseguita alcuna installazione automatica."
|
||||
|
||||
#: src/slic3r/GUI/Preferences.cpp:72
|
||||
msgid "Export sources full pathnames to 3mf and amf"
|
||||
|
||||
Binary file not shown.
@ -1,9 +1,9 @@
|
||||
|
||||
#data = C:/local/Slic3r/resources/localization/lang/TODO.po
|
||||
#data = C:/local/Slic3r/resources/localization/lang/SuperSlicer.po
|
||||
#data = C:/local/Slic3r/resources/localization/lang/Slic3r.po
|
||||
data = C:/local/Slic3r/resources/localization/lang/Slic3r++.po
|
||||
data = C:/local/Slic3r/resources/localization/lang/PrusaSlicer_fr.po
|
||||
|
||||
input = C:/local/Slic3r/resources/localization/SuperSlicer.pot
|
||||
input = C:/local/Slic3r/resources/localization/Slic3r.pot
|
||||
todo = C:/local/Slic3r/resources/localization/lang/TODO.po
|
||||
output = C:/local/Slic3r/resources/localization/lang/SuperSlicer.po
|
||||
output = C:/local/Slic3r/resources/localization/lang/Slic3r.po
|
||||
|
||||
@ -1,10 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
|
||||
0.0.5-susi remove resolution to use default
|
||||
0.0.5 Updated end g-code.
|
||||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.4 Fixed predator output filaname format, infill overlap.
|
||||
0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
|
||||
0.0.2 Added Anycubic Predator
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.1 Initial Version
|
||||
File diff suppressed because one or more lines are too long
Binary file not shown.
|
Before Width: | Height: | Size: 207 KiB |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 38 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 45 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 135 KiB |
Binary file not shown.
@ -1,18 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.5-susi remove resolution to use default
|
||||
0.0.5 General print quality improvements (??)
|
||||
0.0.4 superslicer: remove top_fan_speed
|
||||
0.0.3 slic3r++ adaptation: overlapping & top pattern.
|
||||
0.0.2 changed flow ratio from float to %
|
||||
0.0.1 Multiple Print models were unified into a single one.
|
||||
0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
|
||||
0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
|
||||
0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
|
||||
0.0.1-alpha12 github repo created for version history
|
||||
0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
|
||||
0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 12.2.0
|
||||
min_slic3r_version = 2.1.0
|
||||
0.0.1-alpha Initial version
|
||||
@ -1,858 +0,0 @@
|
||||
# Print profiles for the BIBO printers.
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = BIBO
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.5-susi
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:BIBO2]
|
||||
name = BIBO2 Touch
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = BIBO2
|
||||
bed_model = BIBO2_bed.stl
|
||||
bed_texture = BIBO2.svg
|
||||
default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2; Prusament PLA @BIBO2; Prusament PETG @BIBO2
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 95%
|
||||
bridge_speed = 20
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
dont_support_bridges = 1
|
||||
first_layer_size_compensation = 0
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.40
|
||||
external_perimeter_speed = 25
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 12
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = grid
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 15
|
||||
gcode_comments = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 20%
|
||||
interface_shells = 0
|
||||
max_print_speed = 60
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_one_perimeter_top = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
|
||||
perimeters = 2
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 3
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.40
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance_type = filament
|
||||
support_material_contact_distance_top = 0.15
|
||||
support_material_contact_distance_bottom = 0.15
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 40
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_perimeters = 0
|
||||
thin_walls = 1
|
||||
thin_walls_min_width = 50%
|
||||
thin_walls_overlap = 50%
|
||||
top_fill_pattern = smooth
|
||||
top_infill_extrusion_width = 0.40
|
||||
top_solid_infill_speed = 20
|
||||
travel_speed = 130
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 50
|
||||
wipe_tower_y = 50
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:*0.05mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 10
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 70%
|
||||
default_acceleration = 500
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 20%
|
||||
first_layer_acceleration = 250
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 30
|
||||
max_print_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.05
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 30
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 15
|
||||
|
||||
[print:*0.07mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 8
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 70%
|
||||
bridge_speed = 20
|
||||
default_acceleration = 1000
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 15%
|
||||
first_layer_acceleration = 500
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 40
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.07
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
top_solid_layers = 11
|
||||
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
bridge_flow_ratio = 70%
|
||||
layer_height = 0.1
|
||||
perimeter_acceleration = 800
|
||||
top_solid_layers = 9
|
||||
|
||||
[print:*0.12mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.12
|
||||
perimeters = 3
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 50
|
||||
layer_height = 0.15
|
||||
perimeter_acceleration = 800
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.20
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:*0.24mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.24
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*0.28mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.28
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*0.30mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 95%
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 60
|
||||
layer_height = 0.3
|
||||
perimeter_acceleration = 800
|
||||
perimeter_speed = 50
|
||||
solid_infill_speed = 50
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*soluble_support*]
|
||||
inherits = *common*
|
||||
overhangs = 1
|
||||
skirts = 0
|
||||
support_material = 1
|
||||
support_material_contact_distance = 0
|
||||
support_material_extruder = 2
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_extruder = 2
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0.1
|
||||
support_material_synchronize_layers = 1
|
||||
support_material_threshold = 80
|
||||
support_material_with_sheath = 1
|
||||
wipe_tower_bridging = 6
|
||||
support_material_interface_speed = 80%
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.05mm ULTRADETAIL @BIBO2]
|
||||
inherits = *0.05mm*
|
||||
# alias = 0.05mm ULTRADETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.07mm SUPERDETAIL @BIBO2]
|
||||
inherits = *0.07mm*
|
||||
# alias = 0.07mm SUPERDETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.10mm HIGHDETAIL @BIBO2]
|
||||
inherits = *0.10mm*
|
||||
# alias = 0.10mm HIGHDETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.12mm DETAIL @BIBO2]
|
||||
inherits = *0.12mm*
|
||||
# alias = 0.12mm DETAIL
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.15mm OPTIMAL @BIBO2]
|
||||
inherits = *0.15mm*
|
||||
# alias = 0.15mm OPTIMAL
|
||||
top_infill_extrusion_width = 0.45
|
||||
|
||||
[print:0.20mm NORMAL @BIBO2]
|
||||
inherits = *0.20mm*
|
||||
# alias = 0.20mm NORMAL
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.24mm DRAFT @BIBO2]
|
||||
inherits = *0.24mm*
|
||||
# alias = 0.24mm DRAFT
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.28mm SUPERDRAFT @BIBO2]
|
||||
inherits = *0.28mm*
|
||||
# alias = 0.28mm SUPERDRAFT
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.30mm ULTRADRAFT @BIBO2]
|
||||
inherits = *0.30mm*
|
||||
# alias = 0.30mm ULTRADRAFT
|
||||
bottom_solid_layers = 3
|
||||
bridge_speed = 30
|
||||
external_perimeter_speed = 30
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 55
|
||||
max_print_speed = 60
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 30
|
||||
solid_infill_speed = 50
|
||||
top_solid_infill_speed = 40
|
||||
support_material_speed = 45
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
extrusion_width = 0.5
|
||||
first_layer_extrusion_width = 0.42
|
||||
infill_extrusion_width = 0.5
|
||||
perimeter_extrusion_width = 0.5
|
||||
solid_infill_extrusion_width = 0.5
|
||||
top_infill_extrusion_width = 0.45
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
# Soluble Supports Profiles for dual extrusion #
|
||||
[print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
|
||||
inherits = 0.15mm OPTIMAL @BIBO2; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
external_perimeter_speed = 25
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 2
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
|
||||
inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
[print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
|
||||
inherits = 0.20mm NORMAL @BIBO2; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
external_perimeter_speed = 30
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 2
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
|
||||
inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
extrusion_multiplier = 1
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/
|
||||
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
bed_temperature = 60
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_max_volumetric_speed = 15
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
temperature = 200
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = PETG
|
||||
filament_density = 1.27
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature =70
|
||||
first_layer_temperature = 240
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 100
|
||||
temperature = 240
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
bed_temperature = 100
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FFF2EC
|
||||
filament_max_volumetric_speed = 11
|
||||
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_type = ABS
|
||||
filament_density = 1.04
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 245
|
||||
fan_always_on = 0
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
bridge_fan_speed = 25
|
||||
temperature = 245
|
||||
|
||||
[filament:*FLEX*]
|
||||
inherits = *common*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.2
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #008000
|
||||
filament_max_volumetric_speed = 1.5
|
||||
filament_type = FLEX
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 90
|
||||
min_fan_speed = 70
|
||||
#start_filament_gcode = "M900 K0"; Filament gcode"
|
||||
temperature = 240
|
||||
filament_retract_length = 0.8
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
|
||||
[filament:Generic PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
filament_notes = "List of materials which typically use standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
||||
|
||||
[filament:Generic PETG @BIBO2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic ABS @BIBO2]
|
||||
inherits = *ABS*
|
||||
first_layer_bed_temperature = 90
|
||||
bed_temperature = 90
|
||||
filament_vendor = Generic
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Esun ABS @BIBO2]
|
||||
inherits = Generic ABS @BIBO2
|
||||
filament_vendor = Esun
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Hatchbox ABS @BIBO2]
|
||||
inherits = Generic ABS @BIBO2
|
||||
filament_vendor = Hatchbox
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Generic HIPS @BIBO2]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Generic
|
||||
filament_cost = 27.3
|
||||
filament_density = 1.04
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 10
|
||||
filament_colour = #FFFFD7
|
||||
filament_soluble = 1
|
||||
filament_type = HIPS
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 20
|
||||
min_fan_speed = 20
|
||||
temperature = 230
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:AMOLEN bronze PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = AMOLEN
|
||||
temperature = 205
|
||||
bed_temperature = 65
|
||||
filament_colour = #808040
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_temperature = 215
|
||||
filament_cost = 25.99
|
||||
filament_density = 1.24
|
||||
|
||||
[filament:Prusament PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 215
|
||||
bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
first_layer_bed_temperature = 60
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.24
|
||||
|
||||
[filament:Prusament PETG @BIBO2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 245
|
||||
bed_temperature = 70
|
||||
first_layer_temperature = 245
|
||||
first_layer_bed_temperature =70
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
|
||||
[filament:PrimaSelect PVA+ @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = PrimaSelect
|
||||
filament_cost = 108
|
||||
filament_density = 1.23
|
||||
cooling = 0
|
||||
fan_always_on = 0
|
||||
filament_colour = #FFFFD7
|
||||
filament_max_volumetric_speed = 3.8
|
||||
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_soluble = 1
|
||||
filament_type = PVA
|
||||
first_layer_temperature = 195
|
||||
temperature = 195
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:No Filament - standby only @BIBO2]
|
||||
first_layer_temperature = 170
|
||||
temperature = 170
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:Generic FLEX @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Generic
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.2
|
||||
filament_retract_length = 0
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
|
||||
[filament:Overture TPU @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Overture
|
||||
filament_max_volumetric_speed = 1.5
|
||||
first_layer_temperature = 235
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 235
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 23.99
|
||||
filament_density = 1.21
|
||||
|
||||
[filament:SainSmart TPU @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = SainSmart
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
filament_retract_length = 0.5
|
||||
filament_retract_speed = nil
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
[filament:Filatech FilaFlex40 @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Filatech
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 51.45
|
||||
filament_density = 1.22
|
||||
filament_retract_length = 0.5
|
||||
filament_retract_speed = 20
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
bed_shape = -107x-93,107x-93,107x93,-107x93
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0 # By setting this value to 0 deretract used the retract_speed
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 1100
|
||||
machine_max_acceleration_extruding = 5000
|
||||
machine_max_acceleration_retracting = 1100
|
||||
machine_max_acceleration_x = 500
|
||||
machine_max_acceleration_y = 500
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 20
|
||||
machine_max_feedrate_x = 350
|
||||
machine_max_feedrate_y = 350
|
||||
machine_max_feedrate_z = 2
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 0.3
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.30
|
||||
min_layer_height = 0.05
|
||||
max_print_height = 160
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_vendor = BIBO
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 1.5
|
||||
retract_length_toolchange = 1.5
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 20
|
||||
single_extruder_multi_material = 0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
printer_model =
|
||||
default_print_profile =
|
||||
default_filament_profile =
|
||||
|
||||
[printer:BIBO2 Touch Dual extrusion]
|
||||
inherits = *common*
|
||||
printer_model = BIBO2
|
||||
between_objects_gcode =
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
deretract_speed = 0,0 # Setting this value to 0 uses the retract speed
|
||||
extruder_colour = #FFFF00;#229403
|
||||
extruder_offset = 0x0,0x0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.3,0.3
|
||||
min_layer_height = 0.05,0.05
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
printer_settings_id =
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4,0.4
|
||||
remaining_times = 0
|
||||
retract_before_travel = 1,1
|
||||
retract_before_wipe = 100%,100%
|
||||
retract_layer_change = 1,1
|
||||
retract_length = 1.5,1.5
|
||||
retract_length_toolchange = 1.5,1.5
|
||||
retract_lift = 0,0
|
||||
retract_lift_above = 0,0
|
||||
retract_lift_below = 0,0
|
||||
retract_restart_extra = 0,0
|
||||
retract_restart_extra_toolchange = 0,0
|
||||
retract_speed = 20,20
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{max(first_layer_bed_temperature[0] - 5, first_layer_bed_temperature[1] - 5)} ; wait for bed temp\nM140 S{max(first_layer_bed_temperature[0], first_layer_bed_temperature[1])} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[1]} T1; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[1]} T1; wait for 2nd nozzle heat to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2.0 F400 ; move the platform down 2mm\nT[initial_tool]; switch to initial tool position\nG92 E0.0 ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1,1
|
||||
z_offset = 0
|
||||
|
||||
[printer:BIBO2 Touch E1 right only extrusion]
|
||||
inherits = *common*
|
||||
printer_model = BIBO2
|
||||
printer_variant = 0.4
|
||||
extruder_colour = #FFFF00
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 1
|
||||
retract_length = 1.5
|
||||
retract_speed = 20
|
||||
deretract_speed = 0 # Setting this value to 0 uses the retract speed
|
||||
retract_before_wipe = 100%
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0] * 0.791} T1 ; set 2nd nozzle heater to 79.1 percent standby temp\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T1 ; wait for 2nd nozzle heat to 79.1 percent standby temp\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
|
||||
[printer:BIBO2 Touch E2 left only extrusion]
|
||||
inherits = *common*
|
||||
printer_model = BIBO2
|
||||
printer_variant = 0.4
|
||||
extruder_colour = #229403
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 1
|
||||
retract_length = 1.5
|
||||
retract_speed = 20
|
||||
deretract_speed = 0 # Setting this value to 0 uses the retract speed
|
||||
retract_before_wipe = 100%
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
# Ditto Printing options with custom beds and special start end gcode for print duplication from one nozzle to the other
|
||||
[printer:BIBO2 E1 right E2 Ditto]
|
||||
inherits = BIBO2 Touch E1 right only extrusion
|
||||
printer_model = BIBO2
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
bed_shape = 0x-93,33x-93,33x93,0x93
|
||||
#bed_model = BIBO2_bed.stl
|
||||
#bed_texture = BIBO2.svg
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T1 ; set 2nd nozzle heater to print temperature\n
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to same first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0]} T1 ; wait for 2nd nozzle heat to same first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
|
||||
[printer:BIBO2 E2 left E1 Ditto]
|
||||
inherits = BIBO2 Touch E2 left only extrusion
|
||||
printer_model = BIBO2
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
bed_shape = -33x-93,0x-93,0x93,-33x93
|
||||
#bed_model = BIBO2_bed.stl
|
||||
#bed_texture = BIBO2.svg
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\n
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
@ -1,108 +0,0 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="606.6" height="527.2" viewBox="0 0 606.6 527.2">
|
||||
<title>BIBO2_new</title>
|
||||
<line y2="527.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="141.7" x2="141.7" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="283.5" x2="283.5" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="425.2" x2="425.2" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="566.9" x2="566.9" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="606.6" y1="514.7" x2="606.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="513.1" x2="606.6" y2="513.1" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line y1="527.2" x2="606.6" y2="527.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="371.3" x2="606.6" y2="371.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="229.6" x2="606.6" y2="229.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="87.9" x2="606.6" y2="87.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="606.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="85" x2="85" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="113.4" x2="113.4" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="170.1" x2="170.1" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="198.4" x2="198.4" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="226.8" x2="226.8" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="255.1" x2="255.1" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="311.8" x2="311.8" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="340.2" x2="340.2" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="368.5" x2="368.5" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="396.9" x2="396.9" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="453.5" x2="453.5" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="481.9" x2="481.9" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="510.2" x2="510.2" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="538.6" x2="538.6" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="595.3" x2="595.3" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="28.3" x2="28.3" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="56.7" x2="56.7" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="399.7" x2="606.6" y2="399.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="428" x2="606.6" y2="428" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="456.4" x2="606.6" y2="456.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="484.7" x2="606.6" y2="484.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="343" x2="606.6" y2="343" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="314.7" x2="606.6" y2="314.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="286.3" x2="606.6" y2="286.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="258" x2="606.6" y2="258" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="201.3" x2="606.6" y2="201.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="172.9" x2="606.6" y2="172.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="144.6" x2="606.6" y2="144.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="116.2" x2="606.6" y2="116.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="59.5" x2="606.6" y2="59.5" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="31.2" x2="606.6" y2="31.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="2.8" x2="606.6" y2="2.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<path d="M26.4,519.7H27l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4H26.4Z" style="fill: #fff"/>
|
||||
<path d="M58.1,524.4H54.3a2.7,2.7,0,0,1,.3-1.2,3.8,3.8,0,0,1,.9-.9l.6-.4.6-.4.4-.5a1.3,1.3,0,0,0,.1-.6v-.3a.4.4,0,0,0-.1-.3l-.3-.2-.5-.2-.4.2a.3.3,0,0,0-.3.3.5.5,0,0,0-.2.4v.6h-1c0-.3.1-.6.1-.9a4.3,4.3,0,0,1,.4-.7l.6-.4a1.7,1.7,0,0,1,1.7,0l.6.4.3.5c0,.2.1.4.1.6a1.4,1.4,0,0,1-.2.6.8.8,0,0,1-.2.5c-.1.2-.3.3-.4.4l-.5.4-.5.3-.4.3-.4.3c-.1.1-.1.3-.2.4h2.7Z" style="fill: #fff"/>
|
||||
<path d="M84.2,521.1h.4l.4-.2.3-.2a.9.9,0,0,0,.1-.5,1.4,1.4,0,0,0-.2-.6,1.2,1.2,0,0,0-1-.1l-.3.3a.5.5,0,0,0-.2.4v.4h-.9a2.2,2.2,0,0,1,.1-.8l.4-.6.6-.4h1.4l.6.2.4.5a1.5,1.5,0,0,1,.1.7,1,1,0,0,1-.2.7,1,1,0,0,1-.6.5h0a1.2,1.2,0,0,1,.8.4,2,2,0,0,1,.1,1.7l-.4.5-.7.4h-.7l-.9-.2-.6-.4a.9.9,0,0,1-.4-.6,1.9,1.9,0,0,1-.1-.8h.9a1.6,1.6,0,0,0,.3.9,1,1,0,0,0,.8.3l.7-.2a1.1,1.1,0,0,0,.3-.8.9.9,0,0,0-.1-.5l-.3-.3h-1Z" style="fill: #fff"/>
|
||||
<path d="M114.7,523H114v1.4h-.9v-1.3h-2.4v-.9l2.4-3.4h.9v3.6h.7Zm-3.3-.7h1.7v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M140,518.8h2.9v.8h-2.2l-.3,1.4h0a.9.9,0,0,1,.5-.3h1.3a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.7,1.7,0,0,1,.1.7,1.5,1.5,0,0,1-.1.7l-.3.7a1.8,1.8,0,0,1-1.5.6h-.8a.9.9,0,0,1-.6-.3,1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.8h.9a.8.8,0,0,0,.3.7,1.1,1.1,0,0,0,.8.3h.4l.4-.3c0-.1.1-.2.1-.4a.6.6,0,0,0,.1-.4.9.9,0,0,0-.1-.5.8.8,0,0,0-.2-.4l-.3-.2h-1l-.4.4h-.9Z" style="fill: #fff"/>
|
||||
<path d="M170.4,520.2a1.4,1.4,0,0,0-.2-.6l-.6-.2h-.4l-.3.2a.8.8,0,0,0-.2.4.6.6,0,0,0-.1.4.6.6,0,0,1-.1.4v.4h0a1.2,1.2,0,0,1,.5-.5h1.4a1.3,1.3,0,0,1,.6.4.9.9,0,0,1,.3.6,1.9,1.9,0,0,1,.2.7,1.9,1.9,0,0,1-.2.8c0,.2-.2.4-.3.6l-.6.4-.8.2a1.9,1.9,0,0,1-1-.3,1.2,1.2,0,0,1-.6-.6,1.6,1.6,0,0,1-.3-.9,4.9,4.9,0,0,1-.1-1.2,3.8,3.8,0,0,1,.1-1l.3-.9a2.3,2.3,0,0,1,.7-.7,1.7,1.7,0,0,1,1-.3l.6.2a.5.5,0,0,1,.5.3l.4.4a1.4,1.4,0,0,1,.2.7Zm-.9,3.5h.5c.1-.1.2-.1.3-.3l.2-.3v-.9c-.1-.1-.1-.3-.2-.4l-.3-.2h-.9l-.3.2c-.1.1-.1.3-.2.4s-.1.3-.1.4.1.3.1.5l.2.4.3.2Z" style="fill: #fff"/>
|
||||
<path d="M196,518.8h3.8v.7l-.8,1-.6,1.1a6.5,6.5,0,0,0-.4,1.3l-.3,1.4h-1l.3-1.3c.1-.4.3-.8.4-1.2a12.7,12.7,0,0,1,.7-1.2,7.6,7.6,0,0,1,.8-1.1H196Z" style="fill: #fff"/>
|
||||
<path d="M226.3,524.5l-.8-.2a.9.9,0,0,1-.6-.3l-.5-.6a1.7,1.7,0,0,1-.1-.7,1.2,1.2,0,0,1,.3-.9c.1-.3.4-.4.7-.5h0l-.6-.5a1.4,1.4,0,0,1-.2-.7,1.6,1.6,0,0,1,.5-1.1,2.4,2.4,0,0,1,2.6,0,1.5,1.5,0,0,1,.4,1.1,1.4,1.4,0,0,1-.2.7,1.5,1.5,0,0,1-.6.5h0a1.4,1.4,0,0,1,.8.5,2,2,0,0,1,.2.9,1.7,1.7,0,0,1-.1.7l-.4.6-.7.3Zm0-.8a.8.8,0,0,0,.8-.2,1.1,1.1,0,0,0,.3-.8.9.9,0,0,0-.3-.7,1.2,1.2,0,0,0-1.6,0,.9.9,0,0,0-.3.7,1.1,1.1,0,0,0,.3.8A.8.8,0,0,0,226.3,523.7Zm0-4.3c-.2,0-.5,0-.6.2a.8.8,0,0,0,0,1.2.9.9,0,0,0,1.2,0,.7.7,0,0,0,0-1.2c-.1-.2-.4-.2-.6-.2Z" style="fill: #fff"/>
|
||||
<path d="M253.8,522.9a.9.9,0,0,0,.3.6.8.8,0,0,0,.6.2l.5-.2a1,1,0,0,0,.4-.5c.1-.2.1-.4.2-.6v-.6h0a1.2,1.2,0,0,1-.5.5l-.7.2-.7-.2-.6-.4a1.6,1.6,0,0,1-.3-.6,1.9,1.9,0,0,1-.2-.7,1.9,1.9,0,0,1,.2-.8,2.1,2.1,0,0,1,.4-.6.9.9,0,0,1,.6-.4l.8-.2a1.9,1.9,0,0,1,1,.3,1.7,1.7,0,0,1,.6.6l.3.9c0,.4.1.8.1,1.2s-.1.7-.1,1a3.6,3.6,0,0,1-.4.9l-.6.7a1.9,1.9,0,0,1-1,.3H254a1,1,0,0,1-.5-.4,1.3,1.3,0,0,1-.5-1.1Zm.9-3.5h-.4l-.3.2c-.1.2-.2.3-.2.4s-.1.3-.1.4.1.3.1.5a.8.8,0,0,0,.2.4l.3.2h.9l.3-.2c.1-.2.1-.3.2-.4v-.9l-.2-.4-.3-.2Z" style="fill: #fff"/>
|
||||
<path d="M278.1,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4H278Z" style="fill: #fff"/>
|
||||
<path d="M284.3,518.6a1.7,1.7,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7,1.7,1.7,0,0,1,.3,1,6.7,6.7,0,0,1,0,2,1.6,1.6,0,0,1-.3.9,1.3,1.3,0,0,1-.6.7,1.7,1.7,0,0,1-1,.3,1.9,1.9,0,0,1-1-.3,1.8,1.8,0,0,1-.5-.7,1.6,1.6,0,0,1-.3-.9,6.7,6.7,0,0,1,0-2,1.7,1.7,0,0,1,.3-1,1.8,1.8,0,0,1,.5-.7A1.9,1.9,0,0,1,284.3,518.6Zm0,5.1c.2,0,.4,0,.5-.2a.8.8,0,0,0,.4-.4c0-.2.1-.5.1-.7a4.9,4.9,0,0,0,0-1.7c0-.2-.1-.4-.1-.7l-.4-.4-.5-.2-.5.2-.3.4a2,2,0,0,0-.1.7,4.9,4.9,0,0,0,0,1.7,1.7,1.7,0,0,0,.1.7l.3.4A.6.6,0,0,0,284.3,523.7Z" style="fill: #fff"/>
|
||||
<path d="M307.2,519.7h.6l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M311.7,519.7h.6l.4-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M334.8,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.3Z" style="fill: #fff"/>
|
||||
<path d="M342.9,524.4h-3.8a1.9,1.9,0,0,1,.4-1.2,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5a1.3,1.3,0,0,0,.1-.6.2.2,0,0,0,0-.3.4.4,0,0,0-.1-.3l-.3-.2-.5-.2-.4.2-.3.3-.2.4v.6h-.9a2.8,2.8,0,0,1,.1-.9,1.6,1.6,0,0,1,.4-.7.9.9,0,0,1,.6-.4,1.7,1.7,0,0,1,1.6,0l.6.4.3.5a1.9,1.9,0,0,1,0,1.2l-.3.5a.8.8,0,0,1-.4.4l-.5.4-.4.3-.5.3-.3.3-.3.4H343Z" style="fill: #fff"/>
|
||||
<path d="M363.1,519.7h.6l.5-.2q.2,0,.3-.3c.2-.1.2-.2.3-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M369,521.1h.4l.4-.2.3-.2a.9.9,0,0,0,.1-.5,1.4,1.4,0,0,0-.2-.6l-.7-.2h-.4l-.3.3c0,.1-.1.2-.1.4s-.1.2,0,.4h-1c.1-.3.1-.5.2-.8a2.1,2.1,0,0,1,.4-.6.9.9,0,0,1,.6-.4h1.4l.5.2.4.5a1.4,1.4,0,0,1,.2.7,1.9,1.9,0,0,1-.2.7,1.5,1.5,0,0,1-.6.5h0a.8.8,0,0,1,.7.4,1.7,1.7,0,0,1,.1,1.7,1,1,0,0,1-.4.5l-.6.4h-.8l-.8-.2a.7.7,0,0,1-.6-.4.9.9,0,0,1-.4-.6c-.1-.2-.1-.5-.2-.8h1a1,1,0,0,0,.2.9,1.1,1.1,0,0,0,.8.3l.8-.2a1.3,1.3,0,0,0,.2-1.3l-.4-.3h-1Z" style="fill: #fff"/>
|
||||
<path d="M391.3,519.7h.6l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M399.5,523h-.7v1.4h-.9v-1.3h-2.4v-.9l2.4-3.4h.9v3.6h.7Zm-3.2-.7h1.6v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M419.8,519.7h.6l.5-.2q.2,0,.3-.3c.2-.1.2-.2.2-.4h.8v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M424.8,518.8h2.9v.8h-2.2l-.3,1.4h0a.9.9,0,0,1,.5-.3H427a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.7,1.7,0,0,1,.1.7,1.5,1.5,0,0,1-.1.7l-.3.7-.7.5a1.1,1.1,0,0,1-.8.1h-.8a.9.9,0,0,1-.6-.3,1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.8h.9a1.1,1.1,0,0,0,1,1h.5l.3-.3a.5.5,0,0,0,.2-.4c0-.1.1-.3.1-.4s-.1-.3-.1-.5a.8.8,0,0,0-.2-.4l-.3-.2h-1.1c-.1.1-.3.2-.3.4h-.9Z" style="fill: #fff"/>
|
||||
<path d="M448.2,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.3Z" style="fill: #fff"/>
|
||||
<path d="M455.4,520.2c-.1-.2-.1-.4-.3-.6l-.6-.2a.9.9,0,0,0-.7.3.8.8,0,0,0-.2.4.6.6,0,0,0-.1.4.6.6,0,0,0-.1.4v.4h0a1.2,1.2,0,0,1,.5-.5h1.5a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.7,1.7,0,0,1,.1.7c0,.3-.1.6-.1.8l-.4.6-.6.4-.8.2a1.9,1.9,0,0,1-1-.3,1.2,1.2,0,0,1-.6-.6,1.6,1.6,0,0,1-.3-.9,4.9,4.9,0,0,1-.1-1.2,3.8,3.8,0,0,1,.1-1,3.6,3.6,0,0,1,.4-.9,1.3,1.3,0,0,1,.6-.7,1.9,1.9,0,0,1,1-.3,2.1,2.1,0,0,1,1.2.5c.1.1.3.3.3.4a1.4,1.4,0,0,1,.2.7Zm-1,3.5h.5c.1-.1.2-.1.3-.3l.2-.3v-.9l-.2-.4-.3-.2H454c-.3.1-.4.3-.5.6a.6.6,0,0,0-.1.4.9.9,0,0,0,.1.5c0,.1.1.2.2.4l.3.2Z" style="fill: #fff"/>
|
||||
<path d="M476.5,519.7h.6l.5-.2q.1,0,.3-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M480.8,518.8h3.9v.7l-.8,1-.7,1.1a9.3,9.3,0,0,0-.4,1.3,6.8,6.8,0,0,0-.2,1.4h-1a5.9,5.9,0,0,1,.2-1.3,6.1,6.1,0,0,1,.5-1.2,4.5,4.5,0,0,1,.6-1.2l.8-1.1h-2.9Z" style="fill: #fff"/>
|
||||
<path d="M504.9,519.7h.5l.5-.2a.5.5,0,0,0,.4-.3.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M511.1,524.5l-.8-.2a.9.9,0,0,1-.6-.3,1.3,1.3,0,0,1-.4-.6,1.4,1.4,0,0,1-.2-.7,1.6,1.6,0,0,1,.3-.9l.7-.5h0a1,1,0,0,1-.5-.4,1,1,0,0,1-.2-.7,1.1,1.1,0,0,1,.4-1.1,1.9,1.9,0,0,1,2.6,0,1.1,1.1,0,0,1,.4,1.1.7.7,0,0,1-.2.7,1,1,0,0,1-.5.4h0a1.8,1.8,0,0,1,.7.5,1.6,1.6,0,0,1,.3.9,1.4,1.4,0,0,1-.2.7,1.3,1.3,0,0,1-.4.6.9.9,0,0,1-.6.3Zm0-.8a.8.8,0,0,0,.8-.2,1.1,1.1,0,0,0,.3-.8.9.9,0,0,0-.3-.7,1.1,1.1,0,0,0-.8-.3,1.3,1.3,0,0,0-.8.3.9.9,0,0,0-.3.7,1.1,1.1,0,0,0,.3.8A.8.8,0,0,0,511.1,523.7Zm0-4.3c-.2-.1-.4,0-.6.2a.9.9,0,0,0,0,1.2,1,1,0,0,0,1.3,0,.9.9,0,0,0,0-1.2,1,1,0,0,0-.7-.2Z" style="fill: #fff"/>
|
||||
<path d="M533.3,519.7h.6l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M538.6,522.9c.1.2.1.4.3.6l.6.2.6-.2.3-.5c.1-.2.1-.4.2-.6v-.6h0a1.2,1.2,0,0,1-.5.5l-.7.2-.7-.2-.6-.4a1.6,1.6,0,0,1-.3-.6,1.7,1.7,0,0,1-.1-.7,1.9,1.9,0,0,1,.1-.8,2.1,2.1,0,0,1,.4-.6.9.9,0,0,1,.6-.4l.8-.2a1.9,1.9,0,0,1,1,.3l.6.6.3.9a4.9,4.9,0,0,1,.1,1.2c0,.3-.1.7-.1,1a3.6,3.6,0,0,1-.4.9c-.1.3-.4.5-.6.7a1.9,1.9,0,0,1-1,.3h-.7l-.5-.4-.4-.4a1.5,1.5,0,0,1-.1-.7Zm.9-3.5h-.4l-.3.2c-.1.2-.2.3-.2.4s-.1.3-.1.4.1.3.1.5a.8.8,0,0,0,.2.4l.3.2h.9l.3-.2c.1-.1.1-.3.2-.4v-.9l-.2-.4-.3-.2Z" style="fill: #fff"/>
|
||||
<path d="M565.7,524.4h-3.9a2.8,2.8,0,0,1,.4-1.2,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5a.8.8,0,0,0,.2-.6v-.3l-.2-.3-.3-.2-.4-.2-.5.2q-.1,0-.3.3c-.1.1-.1.2-.1.4a1.3,1.3,0,0,0-.1.6H562a2.8,2.8,0,0,1,.1-.9,1.6,1.6,0,0,1,.4-.7.9.9,0,0,1,.6-.4,1.7,1.7,0,0,1,1.7,0,1,1,0,0,1,.5.4.5.5,0,0,1,.3.5,1.9,1.9,0,0,1,0,1.2l-.3.5a.8.8,0,0,1-.4.4l-.4.4-.5.3-.5.3-.3.3a.8.8,0,0,0-.2.4h2.7Z" style="fill: #fff"/>
|
||||
<path d="M568.2,518.6a1.7,1.7,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7l.3,1a6.7,6.7,0,0,1,0,2l-.3.9a1.3,1.3,0,0,1-.6.7,1.8,1.8,0,0,1-2,0,1.3,1.3,0,0,1-.6-.7l-.3-.9a6.7,6.7,0,0,1,0-2l.3-1a1.3,1.3,0,0,1,.6-.7A1.7,1.7,0,0,1,568.2,518.6Zm0,5.1c.2,0,.4,0,.5-.2s.3-.2.3-.4a1.9,1.9,0,0,0,.2-.7v-1.7a2.5,2.5,0,0,0-.2-.7c0-.1-.2-.3-.3-.4l-.5-.2-.5.2-.3.4a6.4,6.4,0,0,1-.2.7v1.7c.1.2.1.5.2.7l.3.4C567.8,523.7,568,523.7,568.2,523.7Z" style="fill: #fff"/>
|
||||
<path d="M594.8,524.4H591a2.7,2.7,0,0,1,.3-1.2,3.8,3.8,0,0,1,.9-.9l.6-.4.5-.4c.2-.1.3-.3.5-.5a1.3,1.3,0,0,0,.1-.6v-.3c0-.1-.1-.2-.1-.3l-.3-.2-.5-.2-.4.2a.3.3,0,0,0-.3.3.5.5,0,0,0-.2.4v.6h-1a2.9,2.9,0,0,1,.2-.9,1.5,1.5,0,0,1,.3-.7l.6-.4a1.5,1.5,0,0,1,.9-.2,1.1,1.1,0,0,1,.8.2l.6.4.3.5c0,.2.1.4.1.6s-.1.4-.1.6l-.3.5c-.1.2-.3.3-.4.4l-.5.4-.5.3-.4.3-.4.3c-.1.1-.1.3-.2.4h2.8Z" style="fill: #fff"/>
|
||||
<path d="M595.6,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.3Z" style="fill: #fff"/>
|
||||
<path d="M1.7,482.8h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-3.9H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6.2,459.1H2.4a1.9,1.9,0,0,1,.4-1.2,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5c.1-.1.1-.3.2-.5v-.4l-.2-.3-.3-.2H4q-.2,0-.3.3c-.1.1-.1.3-.2.4v.6h-1a2.8,2.8,0,0,1,.1-.9A2.5,2.5,0,0,1,3,454l.6-.4.8-.2.9.2a1,1,0,0,1,.5.4.7.7,0,0,1,.3.6.7.7,0,0,1,.1.5,1.3,1.3,0,0,1-.1.6.8.8,0,0,1-.2.5l-.4.5L5,457l-.5.3-.4.3a.8.8,0,0,0-.4.4c-.1.1-.2.2-.2.3H6.2Z" style="fill: #fff"/>
|
||||
<path d="M3.9,427.5h.8q.3-.1.3-.3a.8.8,0,0,0-.1-1,.7.7,0,0,0-.6-.2H3.8l-.2.2a.8.8,0,0,0-.2.4v.4h-1a1.9,1.9,0,0,1,.2-.7.9.9,0,0,1,.4-.6.7.7,0,0,1,.5-.4l.8-.2h.6l.6.3a1,1,0,0,1,.4.5,1.4,1.4,0,0,1,.2.6,1.4,1.4,0,0,1-.2.7,1.3,1.3,0,0,1-.6.5h0a1.2,1.2,0,0,1,.7.5,1.4,1.4,0,0,1,.3.9,1.4,1.4,0,0,1-.2.7,2.1,2.1,0,0,1-.4.6l-.6.3H3.4l-.6-.4c-.1-.2-.3-.4-.3-.6a3.1,3.1,0,0,1-.2-.8h.9a1.1,1.1,0,0,0,.3.8,1.2,1.2,0,0,0,.8.4,1.3,1.3,0,0,0,.8-.3,1.1,1.1,0,0,0,.3-.7,1.4,1.4,0,0,0-.2-.6c0-.1-.2-.2-.3-.3h-1Z" style="fill: #fff"/>
|
||||
<path d="M6.3,401.1H5.5v1.3H4.7v-1.3H2.3v-.9l2.4-3.4h.8v3.6h.7ZM3,400.4H4.7v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M3.1,368.5H6v.8H3.7l-.3,1.4h0l.5-.3H5.2l.6.4.3.6a2.2,2.2,0,0,1,.1.8,2,2,0,0,1-.1.7l-.3.6-.6.5-.9.2H3.5l-.6-.4a1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.7h.9a1.1,1.1,0,0,0,.3.7l.8.2h.4a.5.5,0,0,0,.4-.2.8.8,0,0,0,.1-.4.4.4,0,0,0,0-.5c.1-.2,0-.3,0-.5l-.2-.3-.3-.3H3.6c-.1.1-.3.2-.3.4H2.4Z" style="fill: #fff"/>
|
||||
<path d="M5,341.5a.5.5,0,0,0-.3-.5c-.1-.2-.3-.2-.6-.2H3.7l-.3.2c-.1.1-.1.2-.2.4s-.1.2-.1.4-.1.3-.1.4v.4H3l.5-.5.7-.2.8.2a1,1,0,0,1,.5.4l.4.6a1.7,1.7,0,0,1,.1.7,2.2,2.2,0,0,1-.1.8,2.1,2.1,0,0,1-.4.6l-.6.4H4.1a1.2,1.2,0,0,1-1-.2l-.6-.6a1.6,1.6,0,0,1-.3-.9,4.9,4.9,0,0,1-.1-1.2,3.4,3.4,0,0,1,.1-1,3.6,3.6,0,0,1,.4-.9c.1-.3.4-.5.6-.7a1.9,1.9,0,0,1,1-.3h.7l.5.4.3.4a.8.8,0,0,1,.2.7Zm-.9,3.6h.4l.3-.3c.1-.1.2-.2.2-.3a.9.9,0,0,0,.1-.5.6.6,0,0,0-.1-.4.8.8,0,0,0-.2-.4l-.3-.2H3.6l-.3.2c-.1.1-.1.2-.2.4v.4a1.9,1.9,0,0,0,.2.8l.3.3Z" style="fill: #fff"/>
|
||||
<path d="M2.4,311.8H6.2v.7l-.8,1a3.4,3.4,0,0,0-.6,1.2,6.1,6.1,0,0,0-.5,1.2,7.7,7.7,0,0,0-.2,1.5h-1a5.9,5.9,0,0,1,.2-1.3,6.9,6.9,0,0,1,.5-1.3l.6-1.2.8-1H2.4Z" style="fill: #fff"/>
|
||||
<path d="M4.3,289.2l-.8-.2c-.2,0-.4-.2-.6-.3l-.4-.6a1.9,1.9,0,0,1-.2-.7,1.6,1.6,0,0,1,.3-.9l.7-.5h0a1,1,0,0,1-.5-.4,1,1,0,0,1-.2-.7,1.3,1.3,0,0,1,.4-1.2,2.8,2.8,0,0,1,1.3-.4,2.8,2.8,0,0,1,1.3.4,1.3,1.3,0,0,1,.4,1.2.7.7,0,0,1-.2.7.9.9,0,0,1-.6.4h0l.8.5a1.6,1.6,0,0,1,.3.9,1.9,1.9,0,0,1-.2.7,2.1,2.1,0,0,1-.4.6c-.2.1-.4.3-.6.3Zm0-.8.8-.2a1.1,1.1,0,0,0,.3-.8.8.8,0,0,0-.3-.7,1.3,1.3,0,0,0-.8-.3,1.3,1.3,0,0,0-.8.3.9.9,0,0,0-.3.7,1.1,1.1,0,0,0,.3.8l.8.2Zm0-4.4a.9.9,0,0,0-.6.3.7.7,0,0,0,0,1.2c.1.2.4.2.6.2s.5,0,.6-.2a.7.7,0,0,0,0-1.2.7.7,0,0,0-.6-.3Z" style="fill: #fff"/>
|
||||
<path d="M3.4,259.3a.8.8,0,0,0,.2.5c.2.2.4.3.6.2a.7.7,0,0,0,.6-.1l.3-.5a6.4,6.4,0,0,0,.2-.7v-.6h0l-.5.5-.7.2H3.4l-.5-.4a2.1,2.1,0,0,1-.4-.6,3.2,3.2,0,0,1,0-1.6,2.1,2.1,0,0,1,.4-.6l.6-.4h.8a1.8,1.8,0,0,1,1,.2c.2.2.5.4.6.6a1.7,1.7,0,0,1,.3,1,4.1,4.1,0,0,1,.1,1.1,3.1,3.1,0,0,1-.1,1,3,3,0,0,1-.4,1,1.7,1.7,0,0,1-.6.6,1.9,1.9,0,0,1-1,.3H3.6l-.6-.3a2.4,2.4,0,0,1-.6-1.1Zm.8-3.6H3.8l-.3.3c-.1.1-.1.2-.2.4v.8c.1.2.1.3.2.4l.3.3h.9l.3-.3a.5.5,0,0,0,.2-.4c0-.1.1-.3,0-.4s0-.3,0-.4-.1-.3-.2-.4l-.3-.3Z" style="fill: #fff"/>
|
||||
<path d="M1.7,227.7h.5l.5-.2.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M7.9,226.6a1.7,1.7,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7,1.7,1.7,0,0,1,.3,1,3.1,3.1,0,0,1,.1,1,3.8,3.8,0,0,1-.1,1,1.6,1.6,0,0,1-.3.9,1.3,1.3,0,0,1-.6.7,1.7,1.7,0,0,1-1,.3,1.9,1.9,0,0,1-1-.3,1.8,1.8,0,0,1-.5-.7,1.6,1.6,0,0,1-.3-.9,3.8,3.8,0,0,1-.1-1,3.1,3.1,0,0,1,.1-1,1.7,1.7,0,0,1,.3-1,1.8,1.8,0,0,1,.5-.7A1.9,1.9,0,0,1,7.9,226.6Zm0,5.1.5-.2.4-.4c0-.3.1-.5.1-.7v-1.7c0-.2-.1-.4-.1-.7l-.4-.4a.7.7,0,0,0-1,0l-.3.4a2,2,0,0,0-.1.7,1.1,1.1,0,0,0,0,.8,1.4,1.4,0,0,0,0,.9,2,2,0,0,0,.1.7l.3.4.5.2Z" style="fill: #fff"/>
|
||||
<path d="M1.7,199.3h.5l.5-.2.4-.3a.5.5,0,0,0,.2-.4h.8V204h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6.1,199.3h.6l.5-.2c.1-.1.3-.1.4-.3l.2-.4h.7V204h-1v-4H6.1Z" style="fill: #fff"/>
|
||||
<path d="M1.7,171h1l.4-.3a.8.8,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M9.9,175.7H6a2,2,0,0,1,.4-1.3,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5a.4.4,0,0,0,.1-.5c.1-.2.1-.3,0-.4a.4.4,0,0,0-.1-.3l-.3-.2H7.6l-.3.3-.2.4v.6h-1a2.9,2.9,0,0,1,.2-.9,1.5,1.5,0,0,1,.3-.7l.6-.4a1.7,1.7,0,0,1,1.7,0l.6.4.3.5c0,.2.1.4.1.6s-.1.4-.1.6l-.3.5-.4.5-.5.3-.5.3-.4.3-.4.4-.2.3H9.9Z" style="fill: #fff"/>
|
||||
<path d="M1.7,142.6h1l.4-.3.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M7.5,144h.9l.3-.3a.6.6,0,0,0,.1-.4.7.7,0,0,0-.3-.6l-.6-.2H7.5l-.3.2-.2.4v.4H6.1a1.7,1.7,0,0,1,.1-.7c.1-.2.2-.5.4-.6l.6-.4.7-.2h.7l.5.3a1,1,0,0,1,.4.5.7.7,0,0,1,.2.6,2.4,2.4,0,0,1-.2.8c-.1.2-.4.3-.6.4h0a1.3,1.3,0,0,1,.7.5,1.6,1.6,0,0,1,.2,1.6c-.1.3-.3.4-.5.6l-.6.3H7.1c-.2-.1-.5-.2-.6-.4l-.4-.6a2.2,2.2,0,0,1-.1-.8h.9a1.1,1.1,0,0,0,.2.8.9.9,0,0,0,.8.4,1.1,1.1,0,0,0,.8-.3.9.9,0,0,0,.3-.7.7.7,0,0,0-.1-.5c-.1-.2-.2-.3-.4-.3l-.4-.2H7.5Z" style="fill: #fff"/>
|
||||
<path d="M1.7,114.3h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8V119h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M9.9,117.6H9.2V119H8.3v-1.4H5.9v-.9l2.4-3.3h.9V117h.7Zm-3.3-.7H8.3v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M1.7,85.9h1l.4-.3a.8.8,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6.7,85H9.6v.8H7.4l-.3,1.5h0l.5-.4h.6l.7.2a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.9,1.9,0,0,1,.1.8c0,.2-.1.4-.1.6a1.6,1.6,0,0,1-.4.7,1,1,0,0,1-.6.5l-.9.2H7.2l-.6-.4a1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.7h.9a.9.9,0,0,0,.9.9h.6l.3-.3a.5.5,0,0,0,.2-.4v-.9l-.2-.4-.3-.2H7.3c-.1.1-.3.2-.3.4H6.1Z" style="fill: #fff"/>
|
||||
<path d="M1.7,57.6h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M8.9,58.1a.9.9,0,0,0-.3-.6l-.5-.2H7.6c-.1.1-.2.1-.3.3l-.2.3c0,.1-.1.3-.1.4s-.1.3-.1.4v.4h0c.2-.2.3-.4.6-.5H8.9l.6.4.3.6a1.7,1.7,0,0,1,.1.7,1.9,1.9,0,0,1-.1.8,2.1,2.1,0,0,1-.4.6l-.6.4-.8.2-1-.3a1.7,1.7,0,0,1-.6-.6l-.3-.9A4.9,4.9,0,0,1,6,59.4c0-.3.1-.6.1-1l.3-.9a2.3,2.3,0,0,1,.7-.7,1.2,1.2,0,0,1,1-.2h.6a.5.5,0,0,1,.5.3,1,1,0,0,1,.4.5,1.1,1.1,0,0,1,.2.6ZM8,61.6h.4c.1,0,.3-.1.3-.2a.8.8,0,0,0,.2-.4.6.6,0,0,0,.1-.4.9.9,0,0,0-.1-.5c0-.1-.1-.2-.2-.3a.7.7,0,0,0-.7-.4H7.6c-.2.1-.3.1-.3.2s-.2.3-.2.4a.9.9,0,0,0-.1.5.6.6,0,0,0,.1.4.8.8,0,0,0,.2.4c0,.1.1.2.3.2Z" style="fill: #fff"/>
|
||||
<path d="M1.7,29.2a.4.4,0,0,0,.5,0h.5l.4-.3a.8.8,0,0,0,.2-.4h.8V34h-1V30H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6,28.3H9.8v.8l-.8,1-.6,1.1L8,32.5a6.8,6.8,0,0,0-.2,1.4h-1A5.9,5.9,0,0,1,7,32.6c.1-.4.3-.8.4-1.2a7.5,7.5,0,0,1,.7-1.2l.8-1H6Z" style="fill: #fff"/>
|
||||
<path d="M1.7.9h.5L2.7.7c.2,0,.3-.2.4-.3A.8.8,0,0,0,3.3,0h.8V5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M7.9,5.7H7.2l-.7-.4-.4-.5A2.2,2.2,0,0,1,6,3.9,2.9,2.9,0,0,1,6.2,3,1.2,1.2,0,0,1,7,2.6H7l-.6-.5a1.9,1.9,0,0,1-.2-.7A1.6,1.6,0,0,1,6.7.3,1.5,1.5,0,0,1,8-.1,1.7,1.7,0,0,1,9.3.3a1.5,1.5,0,0,1,.4,1.1,1.4,1.4,0,0,1-.2.7l-.6.5h0a1.2,1.2,0,0,1,.8.4,2.9,2.9,0,0,1,.2.9,2.2,2.2,0,0,1-.1.8l-.4.5-.7.4Zm0-.7a1.1,1.1,0,0,0,.8-.3A1.1,1.1,0,0,0,9,3.9a.9.9,0,0,0-.3-.7,1.1,1.1,0,0,0-.8-.3,1,1,0,0,0-1,1,1.1,1.1,0,0,0,.3.8A1.1,1.1,0,0,0,7.9,5ZM7.9.6,7.3.8c-.2.2-.3.4-.2.6a.6.6,0,0,0,.2.7,1.5,1.5,0,0,0,1.3,0,1,1,0,0,0,.2-.7A1.1,1.1,0,0,0,8.6.8.8.8,0,0,0,7.9.6Z" style="fill: #fff"/>
|
||||
<path d="M5.1,510a1.5,1.5,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7,1.6,1.6,0,0,1,.3.9,3.8,3.8,0,0,1,.1,1,3.1,3.1,0,0,1-.1,1,1.7,1.7,0,0,1-.3,1,1.9,1.9,0,0,1-.6.7,1.1,1.1,0,0,1-1,.2,1.2,1.2,0,0,1-1-.2l-.5-.7a1.7,1.7,0,0,1-.3-1,3.1,3.1,0,0,1-.1-1,3.8,3.8,0,0,1,.1-1,1.6,1.6,0,0,1,.3-.9,1.8,1.8,0,0,1,.5-.7A1.9,1.9,0,0,1,5.1,510Zm0,5.1.5-.2a1,1,0,0,0,.4-.5c0-.2.1-.4.1-.6v-1.7c0-.2-.1-.5-.1-.7l-.4-.5h-1l-.3.5c0,.2-.1.5-.1.7v1.7c0,.2.1.4.1.6l.3.5Z" style="fill: #fff"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 24 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB |
@ -1,696 +0,0 @@
|
||||
# Print profiles for a basic FDM printer
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = Custom
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.1.4
|
||||
# Where to get the updates from?
|
||||
config_update_url =
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
#TODO: One day we may differentiate variants of the nozzles / hot ends,
|
||||
#for example by the melt zone size, or whether the nozzle is hardened.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
[printer_model:Custom_1.75mm]
|
||||
name = Custom 1.75mm
|
||||
variants = 0.4; 0.15; 0.2; 0.25; 0.3; 0.35; 0.5; 0.6; 0.8; 1.0; 1.2;
|
||||
thumbnail = Basic_thumbnail.png
|
||||
|
||||
[printer_model:Bowden_1.75mm]
|
||||
name = Bowden 1.75mm
|
||||
variants = 0.4; 0.15; 0.2; 0.25; 0.3; 0.35; 0.5; 0.6; 0.8; 1.0; 1.2;
|
||||
thumbnail = Basic_thumbnail.png
|
||||
|
||||
#[printer_model:Custom_2.5mm]
|
||||
#name = Custom 2.5mm
|
||||
#variants = 0.4; 0.15; 0.2; 0.25; 0.3; 0.35; 0.5; 0.6; 0.8; 1.0; 1.2;
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
[printer:*common*]
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X195 Y1\nG1 X190 E4\nG1 F4000\nG1 X180 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
pressure_advance = 0
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 0.5
|
||||
retract_lift = 0.6
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 9999
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 35
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; ENDER3 firmware may only supports the old M204 format\nG28 W ; home all\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X0.0 Y0.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X150.0 E20 F1000.0 ; intro line\nG92 E0.0
|
||||
toolchange_gcode = M600
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
bed_shape = 0x0,200x0,200x200,0x200
|
||||
max_print_height = 200
|
||||
default_filament_profile = Basic PLA
|
||||
silent_mode = 0
|
||||
|
||||
|
||||
[printer:*0.15nozzle*]
|
||||
nozzle_diameter = 0.15
|
||||
max_layer_height = 0.12
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.15
|
||||
default_print_profile = 0.08mm NORMAL .15N
|
||||
|
||||
[printer:*0.2nozzle*]
|
||||
nozzle_diameter = 0.2
|
||||
max_layer_height = 0.16
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.2
|
||||
default_print_profile = 0.1m NORMAL .2N
|
||||
|
||||
[printer:*0.25nozzle*]
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
default_print_profile = 0.1m NORMAL .25N
|
||||
|
||||
[printer:*0.3nozzle*]
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
default_print_profile = 0.15m NORMAL .3N
|
||||
|
||||
[printer:*0.35nozzle*]
|
||||
nozzle_diameter = 0.35
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.35
|
||||
default_print_profile = 0.15m NORMAL .35N
|
||||
|
||||
[printer:*0.4nozzle*]
|
||||
nozzle_diameter = 0.4
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.075
|
||||
printer_variant = 0.4
|
||||
default_print_profile = 0.20mm NORMAL .4N
|
||||
|
||||
[printer:*0.5nozzle*]
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.075
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.20mm NORMAL .5N
|
||||
|
||||
[printer:*0.6nozzle*]
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.5
|
||||
min_layer_height = 0.1
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm NORMAL .6N
|
||||
|
||||
[printer:*0.8nozzle*]
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.6
|
||||
min_layer_height = 0.1
|
||||
printer_variant = 0.8
|
||||
default_print_profile = 0.30mm NORMAL .7N
|
||||
|
||||
[printer:*1.0nozzle*]
|
||||
nozzle_diameter = 1.0
|
||||
max_layer_height = 0.8
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 1.0
|
||||
default_print_profile = 0.50mm NORMAL 1N
|
||||
|
||||
[printer:*1.2nozzle*]
|
||||
nozzle_diameter = 1.2
|
||||
max_layer_height = 1.0
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 1.2
|
||||
default_print_profile = 0.50mm NORMAL 1.2N
|
||||
|
||||
[printer:Basic 0.15 nozzle]
|
||||
inherits = *common*; *0.15nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.2 nozzle]
|
||||
inherits = *common*; *0.2nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.25 nozzle]
|
||||
inherits = *common*; *0.25nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.3 nozzle]
|
||||
inherits = *common*; *0.3nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.4 nozzle]
|
||||
inherits = *common*; *0.4nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.5 nozzle]
|
||||
inherits = *common*; *0.5nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.6 nozzle]
|
||||
inherits = *common*; *0.6nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.8 nozzle]
|
||||
inherits = *common*; *0.8nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 1.0 nozzle]
|
||||
inherits = *common*; *1.0nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 1.2 nozzle]
|
||||
inherits = *common*; *1.2nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:*bowden*]
|
||||
inherits = *common*
|
||||
retract_length = 8
|
||||
retract_speed = 60
|
||||
deretract_speed = 40
|
||||
printer_model = Bowden_1.75mm
|
||||
|
||||
|
||||
[printer:Bowden 0.15 nozzle]
|
||||
inherits = *bowden*; *0.15nozzle*
|
||||
|
||||
[printer:Bowden 0.2 nozzle]
|
||||
inherits = *bowden*; *0.2nozzle*
|
||||
|
||||
[printer:Bowden 0.25 nozzle]
|
||||
inherits = *bowden*; *0.25nozzle*
|
||||
|
||||
[printer:Bowden 0.3 nozzle]
|
||||
inherits = *bowden*; *0.3nozzle*
|
||||
|
||||
[printer:Bowden 0.4 nozzle]
|
||||
inherits = *bowden*; *0.4nozzle*
|
||||
|
||||
[printer:Bowden 0.5 nozzle]
|
||||
inherits = *bowden*; *0.5nozzle*
|
||||
|
||||
[printer:Bowden 0.6 nozzle]
|
||||
inherits = *bowden*; *0.6nozzle*
|
||||
|
||||
[printer:Bowden 0.8 nozzle]
|
||||
inherits = *bowden*; *0.8nozzle*
|
||||
|
||||
[printer:Bowden 1.0 nozzle]
|
||||
inherits = *bowden*; *1.0nozzle*
|
||||
|
||||
[printer:Bowden 1.2 nozzle]
|
||||
inherits = *bowden*; *1.2nozzle*
|
||||
|
||||
# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
|
||||
# All other print presets will derive from the *common* print preset.
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_acceleration = 1000
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 80%
|
||||
over_bridge_flow_ratio = 105%
|
||||
fill_top_flow_ratio = 100%
|
||||
bottom_fill_pattern = concentricgapfill
|
||||
bridge_speed = 20
|
||||
brim_inside_holes = 0
|
||||
brim_width = 0
|
||||
brim_width_interior = 0
|
||||
brim_ears = 1
|
||||
brim_ears_max_angle = 120
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
curve_smoothing_precision = 0
|
||||
curve_smoothing_angle_convex = 170
|
||||
curve_smoothing_angle_concave = 170
|
||||
curve_smoothing_cutoff_dist = 2
|
||||
default_acceleration = 1000
|
||||
dont_support_bridges = 1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 0
|
||||
extra_perimeters_odd_layers = 0
|
||||
only_one_perimeter_top = 1
|
||||
first_layer_size_compensation = -0.05
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
fill_angle = 45
|
||||
fill_density = 13%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_height = 75%
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
hole_size_compensation = -0.03
|
||||
infill_acceleration = 1000
|
||||
infill_dense = 1
|
||||
infill_dense_algo = autosmall
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_first = 0
|
||||
infill_connection = connected
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 20%
|
||||
interface_shells = 0
|
||||
label_printed_objects = 1
|
||||
max_print_speed = 100
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
perimeters = 2
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = hidden
|
||||
skirts = 0
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 25
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_extruder = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance_type = filament
|
||||
support_material_contact_distance_top = 0.15
|
||||
support_material_contact_distance_bottom = 0.15
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_solid_first_layer = 1
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
thin_walls_min_width = 50%
|
||||
thin_walls_overlap = 50%
|
||||
top_fill_pattern = smooth
|
||||
top_solid_infill_speed = 40
|
||||
travel_speed = 180
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
extrusion_width = 105%
|
||||
external_perimeter_extrusion_width = 105%
|
||||
first_layer_extrusion_width = 140%
|
||||
infill_extrusion_width = 110%
|
||||
perimeter_extrusion_width = 110%
|
||||
solid_infill_extrusion_width = 110%
|
||||
top_infill_extrusion_width = 110%
|
||||
support_material_extrusion_width = 110%
|
||||
|
||||
[print:*0.15nozzle*]
|
||||
perimeters = 6
|
||||
infill_overlap = 40%
|
||||
first_layer_height = 0.1
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.15
|
||||
|
||||
[print:*0.2nozzle*]
|
||||
perimeters = 5
|
||||
infill_overlap = 35%
|
||||
first_layer_height = 0.14
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.2
|
||||
|
||||
[print:*0.25nozzle*]
|
||||
perimeters = 4
|
||||
infill_overlap = 30%
|
||||
first_layer_height = 0.17
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.25
|
||||
|
||||
[print:*0.3nozzle*]
|
||||
perimeters = 4
|
||||
infill_overlap = 25%
|
||||
first_layer_height = 0.2
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.3
|
||||
|
||||
[print:*0.35nozzle*]
|
||||
perimeters = 3
|
||||
infill_overlap = 25%
|
||||
first_layer_height = 0.2
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.35
|
||||
|
||||
[print:*0.4nozzle*]
|
||||
perimeters = 3
|
||||
infill_overlap = 25%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
|
||||
[print:*0.5nozzle*]
|
||||
perimeters = 3
|
||||
infill_overlap = 20%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
|
||||
[print:*0.6nozzle*]
|
||||
perimeters = 2
|
||||
infill_overlap = 15%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
|
||||
[print:*0.8nozzle*]
|
||||
perimeters = 2
|
||||
infill_overlap = 15%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.8
|
||||
|
||||
[print:*1.0nozzle*]
|
||||
perimeters = 1
|
||||
infill_overlap = 10%
|
||||
compatible_printers_condition = nozzle_diameter[0]==1
|
||||
|
||||
[print:*1.2nozzle*]
|
||||
perimeters = 1
|
||||
infill_overlap = 10%
|
||||
compatible_printers_condition = nozzle_diameter[0]==1.2
|
||||
|
||||
[print:*0.08mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
top_solid_layers = 9
|
||||
layer_height = 0.08
|
||||
bridge_flow_ratio = 70%
|
||||
perimeter_acceleration = 400
|
||||
|
||||
[print:*0.16mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 6
|
||||
layer_height = 0.16
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
|
||||
[print:*0.24mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
layer_height = 0.24
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
[print:*0.32mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
layer_height = 0.32
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
[print:*0.48mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 2
|
||||
top_solid_layers = 3
|
||||
layer_height = 0.48
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
|
||||
[print:*0.05mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 20
|
||||
top_solid_layers = 20
|
||||
layer_height = 0.05
|
||||
|
||||
[print:*0.1mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 10
|
||||
top_solid_layers = 10
|
||||
layer_height = 0.1
|
||||
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
layer_height = 0.15
|
||||
|
||||
[print:*0.2mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 6
|
||||
layer_height = 0.2
|
||||
|
||||
[print:*0.3mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
layer_height = 0.3
|
||||
|
||||
[print:*0.4mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
layer_height = 0.4
|
||||
|
||||
[print:*0.5mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 2
|
||||
top_solid_layers = 3
|
||||
layer_height = 0.5
|
||||
|
||||
|
||||
|
||||
|
||||
[print:0.05mm NORMAL.15N]
|
||||
inherits = *0.05mm*; *0.15nozzle*
|
||||
[print:0.08mm NORMAL .15N]
|
||||
inherits = *0.08mm*; *0.15nozzle*
|
||||
[print:0.10mm SPEED .15N]
|
||||
inherits = *0.1mm*; *0.15nozzle*
|
||||
|
||||
[print:0.05mm FINE .2N]
|
||||
inherits = *0.05mm*; *0.2nozzle*
|
||||
[print:0.08mm NORMAL .2N]
|
||||
inherits = *0.08mm*; *0.2nozzle*
|
||||
[print:0.10mm NORMAL .2N]
|
||||
inherits = *0.1mm*; *0.2nozzle*
|
||||
[print:0.16mm SPEED .2N]
|
||||
inherits = *0.16mm*; *0.2nozzle*
|
||||
|
||||
[print:0.05mm FINE .25N]
|
||||
inherits = *0.05mm*; *0.25nozzle*
|
||||
[print:0.08mm FINE .25N]
|
||||
inherits = *0.08mm*; *0.25nozzle*
|
||||
[print:0.10mm NORMAL .25N]
|
||||
inherits = *0.1mm*; *0.25nozzle*
|
||||
[print:0.16mm NORMAL .25N]
|
||||
inherits = *0.16mm*; *0.25nozzle*
|
||||
[print:0.20mm SPEED .25N]
|
||||
inherits = *0.2mm*; *0.25nozzle*
|
||||
|
||||
[print:0.05mm EXTRA FINE .3N]
|
||||
inherits = *0.05mm*; *0.3nozzle*
|
||||
[print:0.08mm FINE .3N]
|
||||
inherits = *0.08mm*; *0.3nozzle*
|
||||
[print:0.10mm FINE .3N]
|
||||
inherits = *0.1mm*; *0.3nozzle*
|
||||
[print:0.16mm NORMAL .3N]
|
||||
inherits = *0.16mm*; *0.3nozzle*
|
||||
[print:0.20mm SPEED .3N]
|
||||
inherits = *0.2mm*; *0.3nozzle*
|
||||
[print:0.24mm SPEED .3N]
|
||||
inherits = *0.24mm*; *0.3nozzle*
|
||||
|
||||
[print:0.05mm EXTRA FINE .4N]
|
||||
inherits = *0.05mm*; *0.4nozzle*
|
||||
[print:0.08mm EXTRA FINE .4N]
|
||||
inherits = *0.08mm*; *0.4nozzle*
|
||||
[print:0.10mm FINE .4N]
|
||||
inherits = *0.1mm*; *0.4nozzle*
|
||||
[print:0.16mm NORMAL .4N]
|
||||
inherits = *0.16mm*; *0.4nozzle*
|
||||
[print:0.20mm NORMAL .4N]
|
||||
inherits = *0.2mm*; *0.4nozzle*
|
||||
[print:0.24mm SPEED .4N]
|
||||
inherits = *0.24mm*; *0.4nozzle*
|
||||
[print:0.30mm SPEED .4N]
|
||||
inherits = *0.3mm*; *0.4nozzle*
|
||||
[print:0.32mm SPEED .4N]
|
||||
inherits = *0.32mm*; *0.4nozzle*
|
||||
|
||||
[print:0.10mm FINE .5N]
|
||||
inherits = *0.1mm*; *0.5nozzle*
|
||||
[print:0.16mm FINE .5N]
|
||||
inherits = *0.16mm*; *0.5nozzle*
|
||||
[print:0.20mm NORMAL .5N]
|
||||
inherits = *0.2mm*; *0.5nozzle*
|
||||
[print:0.24mm NORMAL .5N]
|
||||
inherits = *0.24mm*; *0.5nozzle*
|
||||
[print:0.30mm SPEED .5N]
|
||||
inherits = *0.3mm*; *0.5nozzle*
|
||||
[print:0.32mm SPEED .5N]
|
||||
inherits = *0.32mm*; *0.5nozzle*
|
||||
|
||||
[print:0.10mm EXTRA FINE .6N]
|
||||
inherits = *0.1mm*; *0.6nozzle*
|
||||
[print:0.16mm FINE .6N]
|
||||
inherits = *0.16mm*; *0.6nozzle*
|
||||
[print:0.20mm FINE .6N]
|
||||
inherits = *0.2mm*; *0.6nozzle*
|
||||
[print:0.24mm NORMAL .6N]
|
||||
inherits = *0.24mm*; *0.6nozzle*
|
||||
[print:0.30mm NORMAL .6N]
|
||||
inherits = *0.3mm*; *0.6nozzle*
|
||||
[print:0.32mm NORMAL .6N]
|
||||
inherits = *0.32mm*; *0.6nozzle*
|
||||
[print:0.40mm SPEED .6N]
|
||||
inherits = *0.4mm*; *0.6nozzle*
|
||||
[print:0.48mm SPEED .6N]
|
||||
inherits = *0.48mm*; *0.6nozzle*
|
||||
|
||||
[print:0.20mm FINE .8N]
|
||||
inherits = *0.2mm*; *0.8nozzle*
|
||||
[print:0.24mm FINE .8N]
|
||||
inherits = *0.24mm*; *0.8nozzle*
|
||||
[print:0.30mm NORMAL .8N]
|
||||
inherits = *0.3mm*; *0.8nozzle*
|
||||
[print:0.32mm NORMAL .8N]
|
||||
inherits = *0.32mm*; *0.8nozzle*
|
||||
[print:0.40mm NORMAL .8N]
|
||||
inherits = *0.4mm*; *0.8nozzle*
|
||||
[print:0.48mm NORMAL .8N]
|
||||
inherits = *0.48mm*; *0.8nozzle*
|
||||
[print:0.50mm SPEED .8N]
|
||||
inherits = *0.5mm*; *0.8nozzle*
|
||||
|
||||
[print:0.30mm FINE 1N]
|
||||
inherits = *0.3mm*; *1.0nozzle*
|
||||
[print:0.32mm FINE 1N]
|
||||
inherits = *0.32mm*; *1.0nozzle*
|
||||
[print:0.40mm FINE 1N]
|
||||
inherits = *0.4mm*; *1.0nozzle*
|
||||
[print:0.48mm NORMAL 1N]
|
||||
inherits = *0.48mm*; *1.0nozzle*
|
||||
[print:0.50mm NORMAL 1N]
|
||||
inherits = *0.5mm*; *1.0nozzle*
|
||||
|
||||
[print:0.30mm FINE 1.2N]
|
||||
inherits = *0.3mm*; *1.2nozzle*
|
||||
[print:0.32mm FINE 1.2N]
|
||||
inherits = *0.32mm*; *1.2nozzle*
|
||||
[print:0.40mm FINE 1.2N]
|
||||
inherits = *0.4mm*; *1.2nozzle*
|
||||
[print:0.48mm NORMAL 1.2N]
|
||||
inherits = *0.48mm*; *1.2nozzle*
|
||||
[print:0.50mm NORMAL 1.2N]
|
||||
inherits = *0.5mm*; *1.2nozzle*
|
||||
|
||||
|
||||
[filament:*common*]
|
||||
cooling = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_toolchange_delay = 0
|
||||
filament_cooling_moves = 4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_load_time = 0
|
||||
filament_unload_time = 0
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
||||
|
||||
|
||||
[filament:Basic PLA]
|
||||
inherits = *common*
|
||||
bed_temperature = 55
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_max_volumetric_speed = 15
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 215
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
top_fan_speed = 100
|
||||
temperature = 205
|
||||
|
||||
[filament:Basic PET]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = PET
|
||||
filament_density = 1.45
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature =70
|
||||
first_layer_temperature = 230
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 30
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 100
|
||||
top_fan_speed = 20
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
||||
temperature = 240
|
||||
|
||||
[filament:Basic ABS]
|
||||
inherits = *common*
|
||||
bed_temperature = 90
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #3A80CA
|
||||
filament_max_volumetric_speed = 11
|
||||
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_type = ABS
|
||||
filament_density = 1.04
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 250
|
||||
fan_always_on = 0
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
bridge_fan_speed = 30
|
||||
temperature = 240
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 62 KiB |
@ -1,28 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.12-susi ender-3 bltouch fix
|
||||
0.0.12 Added Ender-3V2 and filament profiles.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.
|
||||
0.0.10 Parameter consistency improvements. Enabled conservative elephant foot compensation.
|
||||
0.0.9 Fixed end g-code for Ender 5.
|
||||
0.0.8-susi remove resolution to use default
|
||||
0.0.8 Slight end g-code improvements and spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.6-susi2 Fix G92 that mess up not-relative printer.
|
||||
0.0.6-susi Updated start g-code for Creality printers
|
||||
0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
|
||||
0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
|
||||
0.0.5 Superslicer adaptations
|
||||
0.0.4 Added initial CR-10 profile, end g-code improvements.
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.3 Added Ender-2, Ender-3 BLTouch, updated Ender-3 bed texture.
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.2 Updated for PrusaSlicer 2.2.0-rc
|
||||
0.0.2-beta Update for PrusaSlicer 2.2.0-beta
|
||||
0.0.2-alpha1 Extended list of default filaments to be installed
|
||||
0.0.2-alpha0 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 12.2.0
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
0.0.1 Initial version
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 28 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 27 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 23 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 40 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 27 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 29 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 50 KiB |
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="300mm" height="300mm" version="1.1" viewBox="0 0 300 300" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="299.5" height="299.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="300mm" height="220mm" version="1.1" viewBox="0 0 300 220" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="299.5" height="219.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="400mm" height="400mm" version="1.1" viewBox="0 0 400 400" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="399.5" height="399.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="500mm" height="500mm" version="1.1" viewBox="0 0 500 500" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="499.5" height="499.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="225mm" height="225mm" version="1.1" viewBox="0 0 225 225" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="224.5" height="224.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
@ -1,560 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
sodipodi:docname="ender2.svg"
|
||||
inkscape:version="1.0 (4035a4fb49, 2020-05-01)"
|
||||
id="svg1883"
|
||||
version="1.1"
|
||||
viewBox="0 0 150 150"
|
||||
height="150mm"
|
||||
width="150mm">
|
||||
<defs
|
||||
id="defs1877" />
|
||||
<sodipodi:namedview
|
||||
inkscape:snap-page="false"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-x="85"
|
||||
inkscape:window-height="1177"
|
||||
inkscape:window-width="1827"
|
||||
borderlayer="false"
|
||||
showgrid="false"
|
||||
inkscape:document-rotation="0"
|
||||
inkscape:current-layer="layer1"
|
||||
inkscape:document-units="mm"
|
||||
inkscape:cy="318.48593"
|
||||
inkscape:cx="251.26164"
|
||||
inkscape:zoom="1.4142136"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:pageopacity="0"
|
||||
borderopacity="1"
|
||||
bordercolor="#f14bac"
|
||||
pagecolor="#5d5d5d"
|
||||
id="base">
|
||||
<inkscape:grid
|
||||
id="grid2446"
|
||||
type="xygrid" />
|
||||
</sodipodi:namedview>
|
||||
<metadata
|
||||
id="metadata1880">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title />
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<g
|
||||
inkscape:label="Layer 2"
|
||||
id="layer2"
|
||||
inkscape:groupmode="layer">
|
||||
<path
|
||||
sodipodi:nodetypes="cccccscsccsssccscsscscccccccssssccsscssccsscsccscscsccscsscscscsssccsssccccsccsscsccscscsccscsscscscscccccssscccc"
|
||||
d="m 104.83464,129.87598 -2.1e-4,10.24981 h 35.29136 v -10.25 z m 8.12259,2.01941 c 0.66867,0 1.17978,0.20044 1.53295,0.60064 0.35605,0.40018 0.53409,0.97529 0.53409,1.72563 v 3.84905 h -1.76328 v -3.84905 c 0,-0.36782 -0.12846,-0.5519 -0.38609,-0.5519 -0.24896,0 -0.37361,0.18408 -0.37361,0.5519 v 3.84905 h -1.76274 v -3.91101 c 0,-0.68562 0.20102,-1.23423 0.60339,-1.6462 0.40526,-0.41196 0.94369,-0.61811 1.61529,-0.61811 z m 23.39139,0 c 0.57318,0 1.0595,0.20486 1.45898,0.61388 0.40236,0.409 0.60339,0.90595 0.60339,1.49151 0,0.33547 -0.0737,0.64755 -0.22145,0.93592 l -0.70343,1.39037 h 0.99 v 1.74364 h -3.82978 l 1.90186,-3.62818 0.0651,-0.12394 c 0.0521,-0.097 0.0781,-0.19239 0.0781,-0.28655 0,-0.23835 -0.13768,-0.35752 -0.41267,-0.35752 -0.10711,0 -0.20084,0.041 -0.28189,0.12342 -0.0781,0.0795 -0.11724,0.17343 -0.11724,0.28231 0,0.12357 0.0521,0.23575 0.15631,0.33579 l -0.76022,1.37712 c -0.31842,-0.2001 -0.56285,-0.4548 -0.73365,-0.76376 -0.1708,-0.30897 -0.25637,-0.65013 -0.25637,-1.02384 0,-0.57969 0.20154,-1.07586 0.60391,-1.48782 0.40238,-0.4149 0.8887,-0.62235 1.45896,-0.62235 z m -28.03768,0.15042 h 1.53295 v 1.72988 h -1.12444 c -0.30395,0 -0.45593,0.10023 -0.45593,0.30031 0,0.11771 0.036,0.20027 0.10838,0.24736 0.0723,0.0442 0.20136,0.0662 0.38662,0.0662 h 0.97282 v 1.34164 h -1.15101 c -0.15631,0 -0.26742,0.0233 -0.334,0.0705 -0.0636,0.0471 -0.0958,0.12652 -0.0958,0.23834 0,0.12654 0.0335,0.2104 0.10005,0.2516 0.0665,0.0383 0.20243,0.0577 0.408,0.0577 h 1.1854 v 1.7214 h -1.38497 c -0.65132,0 -1.14941,-0.15761 -1.49388,-0.47246 -0.34448,-0.3178 -0.51689,-0.77554 -0.51689,-1.37289 v -2.36122 c 0,-0.57674 0.16245,-1.02384 0.48667,-1.34163 0.32711,-0.3178 0.78558,-0.4767 1.37612,-0.4767 z m 7.79453,0 h 2.29683 c 1.00739,0 1.79639,0.23211 2.36665,0.69704 0.67738,0.55614 1.01606,1.31091 1.01606,2.26429 0,0.91221 -0.28965,1.65685 -0.8686,2.23359 -0.57895,0.57674 -1.32453,0.86494 -2.23638,0.86494 -0.10712,0 -0.28208,-0.006 -0.52523,-0.0175 v -1.77012 h 0.28241 c 1.02764,0 1.54129,-0.43697 1.54129,-1.31092 0,-0.82097 -0.50497,-1.23145 -1.51523,-1.23145 h -0.59506 v 4.29502 h -1.76274 z m 8.25463,0 h 1.53242 v 1.72988 h -1.12444 c -0.30395,0 -0.45592,0.10023 -0.45592,0.30031 0,0.11771 0.036,0.20027 0.10837,0.24736 0.0723,0.0442 0.20136,0.0662 0.38663,0.0662 h 0.97231 v 1.34164 h -1.1505 c -0.15633,0 -0.26795,0.0233 -0.33453,0.0705 -0.0636,0.0471 -0.0953,0.12652 -0.0953,0.23834 0,0.12654 0.0334,0.2104 0.10006,0.2516 0.0666,0.0383 0.2025,0.0577 0.40799,0.0577 h 1.1854 v 1.7214 h -1.38497 c -0.65133,0 -1.1494,-0.15761 -1.49388,-0.47246 -0.34447,-0.3178 -0.51636,-0.77554 -0.51636,-1.37289 v -2.36122 c 0,-0.57674 0.16194,-1.02384 0.48615,-1.34163 0.32711,-0.3178 0.78609,-0.4767 1.37664,-0.4767 z m 2.54849,0 h 2.26245 c 0.68895,0 1.22304,0.17344 1.60225,0.52066 0.42265,0.38842 0.63361,0.88147 0.63361,1.47882 0,0.60911 -0.2618,1.1224 -0.78576,1.54025 l 1.01608,2.48517 h -1.84978 l -0.85557,-1.94227 v -1.54926 h 0.13913 c 0.37052,0 0.55596,-0.16201 0.55596,-0.4857 0,-0.28541 -0.21456,-0.42796 -0.64299,-0.42796 h -0.31263 v 4.40519 h -1.76275 z"
|
||||
style="display:inline;fill:#ffffff;stroke:#fdfdfd;stroke-width:0;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0"
|
||||
id="rect205" />
|
||||
</g>
|
||||
<g
|
||||
id="layer1"
|
||||
inkscape:groupmode="layer"
|
||||
inkscape:label="Layer 1"
|
||||
style="display:inline">
|
||||
<path
|
||||
id="path2643"
|
||||
d="M 0,0 H 150 V 150 H 0 Z"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2645"
|
||||
d="M 75,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2647"
|
||||
d="M 0,75 H 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2649"
|
||||
d="M 25,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2651"
|
||||
d="M 50,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2653"
|
||||
d="M 100,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2655"
|
||||
d="m 125,0 0,130"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,25 H 2.0000005e-6"
|
||||
id="path2649-5" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,50 H 2.0000005e-6"
|
||||
id="path2651-4" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,100 H 2.0000005e-6"
|
||||
id="path2653-9" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,125 H 2.0000005e-6"
|
||||
id="path2655-5" />
|
||||
<path
|
||||
id="path2681"
|
||||
d="M 4.9735417,-0.26458333 V 150.26458"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2683"
|
||||
d="M 9.9911806,150.26458 V -0.26458333"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2685"
|
||||
d="M 15.008819,-0.26458333 V 150.26458"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2687"
|
||||
d="M 20.026458,150.26458 V -0.26458333"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 29.982361,-0.52917 V 150"
|
||||
id="path2681-2" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 35,150 V -0.52917"
|
||||
id="path2683-1" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 40.017638,-0.52917 V 150"
|
||||
id="path2685-5" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 45.035278,150 V -0.52917"
|
||||
id="path2687-4" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 54.964723,0 V 150.52917"
|
||||
id="path2681-9" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 59.982362,150.52917 V 0"
|
||||
id="path2683-8" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 65,0 V 150.52917"
|
||||
id="path2685-4" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 70.01764,150.52917 V 0"
|
||||
id="path2687-7" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 80,-0.52917033 V 150"
|
||||
id="path2681-3" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 85.017639,150 V -0.52917033"
|
||||
id="path2683-6" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 90.035277,-0.52917033 V 150"
|
||||
id="path2685-3" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 95.052918,150 V -0.52917033"
|
||||
id="path2687-44" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 104.96472,0 V 150.52917"
|
||||
id="path2681-36" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 110,130 109.98236,0"
|
||||
id="path2683-5"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 115,0 0,130"
|
||||
id="path2685-7"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 120,130 120.01764,0"
|
||||
id="path2687-48"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 129.96472,0 130,130"
|
||||
id="path2681-0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 135,130 V 0"
|
||||
id="path2683-0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 140,0 0,150"
|
||||
id="path2685-2"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 145.01764,150.52917 V 0"
|
||||
id="path2687-47" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 149.73541,4.955902 0,5"
|
||||
id="path2681-39"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 0,10 149.73541,9.973541"
|
||||
id="path2683-3"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 149.73541,14.991179 0,15"
|
||||
id="path2685-51"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 0,20 149.73541,0.0088"
|
||||
id="path2687-486"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-2-1"
|
||||
d="M 150,30 H 0"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-1-9"
|
||||
d="M 0,35 150,34.98236"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-5-4"
|
||||
d="M 150,40 H 0"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2687-4-9"
|
||||
d="m 0,45 150,0.01764"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-9-6"
|
||||
d="M 149.47083,54.94708 0,55"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-8-0"
|
||||
d="M 0,60 149.47083,59.96472"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-4-7"
|
||||
d="M 149.47083,64.98236 0,65"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-3-7"
|
||||
d="M 150,79.98236 0,80"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-6-0"
|
||||
d="M 0,85 H 150"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-3-3"
|
||||
d="M 150,90.01764 H -0.529169"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2687-44-3"
|
||||
d="m 0,95 150,0.03528"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-36-5"
|
||||
d="M 149.47083,104.94708 0,105"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-5-1"
|
||||
d="m 0,110 149.47083,-0.0353"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-7-5"
|
||||
d="M 149.47083,114.98236 0,115"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2687-48-9"
|
||||
d="M 0,120 H 149.47083"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-0-8"
|
||||
d="M 150,130 0,130"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-0-5"
|
||||
d="M 0,135 H 105"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-2-7"
|
||||
d="M 150,140 H 0"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2687-47-6"
|
||||
d="M 0,145 H 149.47083"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
id="path2683-5-5"
|
||||
d="m 110,150 0,-10"
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 115,150 V 140"
|
||||
id="path2683-5-5-6"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 120,150 V 140"
|
||||
id="path2683-5-5-0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 130,150 V 140"
|
||||
id="path2683-5-5-9"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 135,150 V 140"
|
||||
id="path2683-5-5-2"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
style="display:inline;fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="m 125,140 0,10"
|
||||
id="path2655-0" />
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-4"
|
||||
aria-label="125">
|
||||
<path
|
||||
id="path188"
|
||||
d="M 121.63635,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24718 v 0.1868966 z" />
|
||||
<path
|
||||
id="path190"
|
||||
d="M 122.58805,2.0732279 V 1.9181985 l 0.26614,-0.2661338 q 0.0749,-0.074931 0.11972,-0.1291912 0.0456,-0.05426 0.0698,-0.096463 0.025,-0.043064 0.0327,-0.079237 0.008,-0.036174 0.008,-0.074931 0,-0.031867 -0.0103,-0.060289 -0.0103,-0.029283 -0.0301,-0.049954 -0.0198,-0.021532 -0.05,-0.03359 -0.0301,-0.012919 -0.0689,-0.012919 -0.0663,0 -0.12316,0.029283 -0.0568,0.028422 -0.10766,0.076654 l -0.1111,-0.1429716 q 0.0732,-0.068041 0.1645,-0.10852056 0.0922,-0.0413412 0.19895,-0.0413412 0.0827,0 0.14987,0.0215319 0.0672,0.0206706 0.11455,0.0620118 0.0482,0.041341 0.0741,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.0181,0.125746 -0.0181,0.057705 -0.0525,0.112827 -0.0344,0.055122 -0.0853,0.1102431 -0.0499,0.055122 -0.11455,0.1162721 l -0.16364,0.1558906 h 0.47456 v 0.1937868 z" />
|
||||
<path
|
||||
id="path192"
|
||||
d="m 124.31491,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10507,0.1179946 -0.0672,0.048231 -0.15848,0.073208 -0.0913,0.024977 -0.19809,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11282,0.019809 0.0637,0.00689 0.13006,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 H 123.6035 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.1378,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-9"
|
||||
aria-label="100">
|
||||
<path
|
||||
id="path181"
|
||||
d="M 96.636346,2.0732279 V 1.8863313 H 96.92315 V 1.1628608 l -0.249769,0.1378039 -0.0689,-0.1713936 0.357429,-0.18861909 h 0.176561 V 1.8863313 h 0.247186 v 0.1868966 z" />
|
||||
<path
|
||||
id="path183"
|
||||
d="m 98.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03015,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.08441,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03015,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01722,0.076653 -0.01722,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 97.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z" />
|
||||
<path
|
||||
id="path185"
|
||||
d="m 99.372615,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.05771,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171394,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171393,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666627,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.61e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 l -0.419441,0.3031686 q 0.02756,0.083544 0.07752,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01722,-0.077515 0.01722,-0.1817289 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-99"
|
||||
aria-label="25">
|
||||
<path
|
||||
id="path166"
|
||||
style="stroke-width:0.264583"
|
||||
d="M 22.616538,2.0732279 V 1.9181985 l 0.266134,-0.2661338 q 0.07493,-0.074931 0.119717,-0.1291912 0.04565,-0.05426 0.06976,-0.096463 0.02498,-0.043064 0.03273,-0.079237 0.0078,-0.036174 0.0078,-0.074931 0,-0.031867 -0.01034,-0.060289 -0.01034,-0.029283 -0.03014,-0.049954 -0.01981,-0.021532 -0.04995,-0.03359 -0.03015,-0.012919 -0.0689,-0.012919 -0.06632,0 -0.123163,0.029283 -0.05684,0.028422 -0.107659,0.076654 L 22.611371,1.0784559 q 0.07321,-0.068041 0.164503,-0.10852056 0.09216,-0.0413412 0.198955,-0.0413412 0.08268,0 0.149861,0.0215319 0.06718,0.0206706 0.11455,0.0620118 0.04823,0.041341 0.07407,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.01809,0.125746 -0.01809,0.057705 -0.05254,0.112827 -0.03445,0.055122 -0.08527,0.1102431 -0.04995,0.055122 -0.114549,0.1162721 l -0.163642,0.1558906 h 0.474562 v 0.1937868 z" />
|
||||
<path
|
||||
id="path168"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 24.343394,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05685,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06374,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 23.631981 V 0.94754221 h 0.649401 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-3"
|
||||
aria-label="50">
|
||||
<path
|
||||
id="path171"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 48.371874,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105075,0.1179946 -0.06718,0.048231 -0.158475,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03015,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06373,0.00689 0.130052,0.00689 0.129191,0 0.196371,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 47.660462 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164503,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z" />
|
||||
<path
|
||||
id="path173"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 49.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03015,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03015,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 48.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-7"
|
||||
aria-label="75">
|
||||
<path
|
||||
id="path176"
|
||||
style="stroke-width:0.264583"
|
||||
d="M 72.926595,2.0732279 H 72.688884 L 73.136746,1.150803 H 72.596727 V 0.94754221 h 0.782037 V 1.1309937 Z" />
|
||||
<path
|
||||
id="path178"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 74.343392,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112826,0.019809 0.06373,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 73.631979 V 0.94754221 H 74.28138 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-5-1"
|
||||
aria-label="150">
|
||||
<path
|
||||
id="path195"
|
||||
style="stroke-width:0.264583"
|
||||
d="M 146.47099,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24719 v 0.1868966 z" />
|
||||
<path
|
||||
id="path197"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 148.17803,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10508,0.1179946 -0.0672,0.048231 -0.15847,0.073208 -0.0913,0.024977 -0.1981,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11283,0.019809 0.0637,0.00689 0.13005,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 h -0.22049 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.13781,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z" />
|
||||
<path
|
||||
id="path199"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 149.20726,1.505648 q 0,0.1386652 -0.0301,0.2480471 -0.0301,0.1093818 -0.0887,0.185174 -0.0577,0.074931 -0.14125,0.1145495 -0.0835,0.039619 -0.1912,0.039619 -0.093,0 -0.1714,-0.032728 -0.0784,-0.032729 -0.13522,-0.1024917 -0.0568,-0.070624 -0.0887,-0.1800063 -0.0319,-0.1093819 -0.0319,-0.2618275 0,-0.1386652 0.0301,-0.248047 0.031,-0.1093819 0.0887,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.1912,-0.0396186 0.093,0 0.1714,0.0327284 0.0784,0.0327284 0.13436,0.10249171 0.0568,0.069763 0.0887,0.179145 0.0319,0.1093819 0.0319,0.2626879 z m -0.66663,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.002,0.030145 l 0.42203,-0.3048912 q -0.0301,-0.085266 -0.0801,-0.125746 -0.0491,-0.041341 -0.11627,-0.041341 -0.0482,0 -0.0896,0.024977 -0.0413,0.024116 -0.0723,0.074931 -0.0301,0.050815 -0.0482,0.1274686 -0.0172,0.076653 -0.0172,0.1817289 z m 0.45475,0.00345 q 0,-0.014642 -8.6e-4,-0.029283 -8.6e-4,-0.015503 -8.6e-4,-0.029283 l -0.41944,0.3031686 q 0.0276,0.083544 0.0775,0.1240235 0.05,0.04048 0.11628,0.04048 0.0482,0 0.0896,-0.024977 0.0422,-0.024977 0.0723,-0.074931 0.031,-0.050815 0.0482,-0.1274686 0.0172,-0.077515 0.0172,-0.1817289 z" />
|
||||
</g>
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 150,70 0.52917,70.01764"
|
||||
id="path2685-4-7-5" />
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 140,135 h 10"
|
||||
id="path2683-0-5-5" />
|
||||
<g
|
||||
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:8.81944px;line-height:1.25;font-family:'Bauhaus 93';-inkscape-font-specification:'Bauhaus 93, Normal';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text893"
|
||||
aria-label="ENDER 2">
|
||||
<g
|
||||
id="g220" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="125"
|
||||
id="text966-0-4-0"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-120.58115,24.81636)">
|
||||
<path
|
||||
d="M 121.63635,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24718 v 0.1868966 z"
|
||||
id="path188-1" />
|
||||
<path
|
||||
d="M 122.58805,2.0732279 V 1.9181985 l 0.26614,-0.2661338 q 0.0749,-0.074931 0.11972,-0.1291912 0.0456,-0.05426 0.0698,-0.096463 0.025,-0.043064 0.0327,-0.079237 0.008,-0.036174 0.008,-0.074931 0,-0.031867 -0.0103,-0.060289 -0.0103,-0.029283 -0.0301,-0.049954 -0.0198,-0.021532 -0.05,-0.03359 -0.0301,-0.012919 -0.0689,-0.012919 -0.0663,0 -0.12316,0.029283 -0.0568,0.028422 -0.10766,0.076654 l -0.1111,-0.1429716 q 0.0732,-0.068041 0.1645,-0.10852056 0.0922,-0.0413412 0.19895,-0.0413412 0.0827,0 0.14987,0.0215319 0.0672,0.0206706 0.11455,0.0620118 0.0482,0.041341 0.0741,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.0181,0.125746 -0.0181,0.057705 -0.0525,0.112827 -0.0344,0.055122 -0.0853,0.1102431 -0.0499,0.055122 -0.11455,0.1162721 l -0.16364,0.1558906 h 0.47456 v 0.1937868 z"
|
||||
id="path190-2" />
|
||||
<path
|
||||
d="m 124.31491,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10507,0.1179946 -0.0672,0.048231 -0.15848,0.073208 -0.0913,0.024977 -0.19809,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11282,0.019809 0.0637,0.00689 0.13006,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 H 123.6035 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.1378,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z"
|
||||
id="path192-3" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="100"
|
||||
id="text966-0-9-0"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-95.765044,49.636453)">
|
||||
<path
|
||||
d="M 96.636346,2.0732279 V 1.8863313 H 96.92315 V 1.1628608 l -0.249769,0.1378039 -0.0689,-0.1713936 0.357429,-0.18861909 h 0.176561 V 1.8863313 h 0.247186 v 0.1868966 z"
|
||||
id="path181-5" />
|
||||
<path
|
||||
d="m 98.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03015,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.08441,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03015,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01722,0.076653 -0.01722,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 97.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z"
|
||||
id="path183-5" />
|
||||
<path
|
||||
d="m 99.372615,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.05771,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171394,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171393,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666627,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.61e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 l -0.419441,0.3031686 q 0.02756,0.083544 0.07752,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01722,-0.077515 0.01722,-0.1817289 z"
|
||||
id="path185-2" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="25"
|
||||
id="text966-0-99-1"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-21.665685,124.65487)">
|
||||
<path
|
||||
d="M 22.616538,2.0732279 V 1.9181985 l 0.266134,-0.2661338 q 0.07493,-0.074931 0.119717,-0.1291912 0.04565,-0.05426 0.06976,-0.096463 0.02498,-0.043064 0.03273,-0.079237 0.0078,-0.036174 0.0078,-0.074931 0,-0.031867 -0.01034,-0.060289 -0.01034,-0.029283 -0.03014,-0.049954 -0.01981,-0.021532 -0.04995,-0.03359 -0.03015,-0.012919 -0.0689,-0.012919 -0.06632,0 -0.123163,0.029283 -0.05684,0.028422 -0.107659,0.076654 L 22.611371,1.0784559 q 0.07321,-0.068041 0.164503,-0.10852056 0.09216,-0.0413412 0.198955,-0.0413412 0.08268,0 0.149861,0.0215319 0.06718,0.0206706 0.11455,0.0620118 0.04823,0.041341 0.07407,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.01809,0.125746 -0.01809,0.057705 -0.05254,0.112827 -0.03445,0.055122 -0.08527,0.1102431 -0.04995,0.055122 -0.114549,0.1162721 l -0.163642,0.1558906 h 0.474562 v 0.1937868 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path166-8" />
|
||||
<path
|
||||
d="m 24.343394,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05685,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06374,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 23.631981 V 0.94754221 h 0.649401 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path168-6" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="50"
|
||||
id="text966-0-3-4"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-46.758479,99.60519)">
|
||||
<path
|
||||
d="m 48.371874,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105075,0.1179946 -0.06718,0.048231 -0.158475,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03015,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06373,0.00689 0.130052,0.00689 0.129191,0 0.196371,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 47.660462 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164503,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path171-2" />
|
||||
<path
|
||||
d="m 49.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03015,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03015,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 48.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path173-7" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="75"
|
||||
id="text966-0-7-6"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-71.57512,75.04448)">
|
||||
<path
|
||||
d="M 72.926595,2.0732279 H 72.688884 L 73.136746,1.150803 H 72.596727 V 0.94754221 h 0.782037 V 1.1309937 Z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path176-3" />
|
||||
<path
|
||||
d="m 74.343392,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112826,0.019809 0.06373,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 73.631979 V 0.94754221 H 74.28138 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path178-3" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="150"
|
||||
id="text966-0-5-1-6"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-145.49952,-0.01156767)">
|
||||
<path
|
||||
d="M 146.47099,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24719 v 0.1868966 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path195-7" />
|
||||
<path
|
||||
d="m 148.17803,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10508,0.1179946 -0.0672,0.048231 -0.15847,0.073208 -0.0913,0.024977 -0.1981,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11283,0.019809 0.0637,0.00689 0.13005,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 h -0.22049 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.13781,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path197-7" />
|
||||
<path
|
||||
d="m 149.20726,1.505648 q 0,0.1386652 -0.0301,0.2480471 -0.0301,0.1093818 -0.0887,0.185174 -0.0577,0.074931 -0.14125,0.1145495 -0.0835,0.039619 -0.1912,0.039619 -0.093,0 -0.1714,-0.032728 -0.0784,-0.032729 -0.13522,-0.1024917 -0.0568,-0.070624 -0.0887,-0.1800063 -0.0319,-0.1093819 -0.0319,-0.2618275 0,-0.1386652 0.0301,-0.248047 0.031,-0.1093819 0.0887,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.1912,-0.0396186 0.093,0 0.1714,0.0327284 0.0784,0.0327284 0.13436,0.10249171 0.0568,0.069763 0.0887,0.179145 0.0319,0.1093819 0.0319,0.2626879 z m -0.66663,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.002,0.030145 l 0.42203,-0.3048912 q -0.0301,-0.085266 -0.0801,-0.125746 -0.0491,-0.041341 -0.11627,-0.041341 -0.0482,0 -0.0896,0.024977 -0.0413,0.024116 -0.0723,0.074931 -0.0301,0.050815 -0.0482,0.1274686 -0.0172,0.076653 -0.0172,0.1817289 z m 0.45475,0.00345 q 0,-0.014642 -8.6e-4,-0.029283 -8.6e-4,-0.015503 -8.6e-4,-0.029283 l -0.41944,0.3031686 q 0.0276,0.083544 0.0775,0.1240235 0.05,0.04048 0.11628,0.04048 0.0482,0 0.0896,-0.024977 0.0422,-0.024977 0.0723,-0.074931 0.031,-0.050815 0.0482,-0.1274686 0.0172,-0.077515 0.0172,-0.1817289 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path199-0" />
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 52 KiB |
File diff suppressed because it is too large
Load Diff
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 15 KiB |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="350mm" height="350mm" version="1.1" viewBox="0 0 350 350" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="349.5" height="349.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,2 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.1 Initial Version
|
||||
@ -1,842 +0,0 @@
|
||||
# Print profiles for the FLSun Delta printers.
|
||||
##
|
||||
# Author: https://github.com/Foxies-CSTL/PrusaSlicer
|
||||
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/5582
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = FLSun
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.1
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:QQSP]
|
||||
name = FLSun QQS Pro
|
||||
variants = 0.4; 0.6
|
||||
technology = FFF
|
||||
bed_model = QQSP_bed.stl
|
||||
bed_texture = QQSP.svg
|
||||
default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
|
||||
|
||||
[printer_model:Q5]
|
||||
name = FLSun Q5
|
||||
variants = 0.4; 0.6
|
||||
technology = FFF
|
||||
bed_model = Q5_bed.stl
|
||||
bed_texture = Q5.svg
|
||||
default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
|
||||
|
||||
#########################################
|
||||
###### begin Common print presets #######
|
||||
#########################################
|
||||
|
||||
# Common print preset
|
||||
[print:*common_flsunq*]
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_acceleration = 800
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.8
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
default_acceleration = 800
|
||||
dont_support_bridges = 1
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 45
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 800
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
infill_acceleration = 800
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
max_print_speed = 200
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco
|
||||
perimeters = 3
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 45
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 2
|
||||
skirt_distance = 5
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 25
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 1
|
||||
support_material_auto = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.38
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 0
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_min_thickness = 0.6
|
||||
travel_speed = 150
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 170
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
## QQS
|
||||
|
||||
[print:*QQSP*]
|
||||
bridge_acceleration = 1000
|
||||
default_acceleration = 1500
|
||||
first_layer_acceleration = 1000
|
||||
infill_acceleration = 800
|
||||
max_print_speed = 200
|
||||
perimeter_acceleration = 800
|
||||
|
||||
## Q5
|
||||
|
||||
[print:*Q5*]
|
||||
bridge_acceleration = 1000
|
||||
default_acceleration = 800
|
||||
first_layer_acceleration = 800
|
||||
infill_acceleration = 1000
|
||||
max_print_speed = 150
|
||||
perimeter_acceleration = 800
|
||||
|
||||
# Print parameters common to a 0.6mm diameter nozzle.
|
||||
|
||||
[print:*0.6nozzleFLSUN*]
|
||||
bridge_acceleration = 1000
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 25
|
||||
default_acceleration = 1000
|
||||
external_perimeter_extrusion_width = 0.65
|
||||
extrusion_width = 0.65
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_extrusion_width = 0.65
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
infill_acceleration = 1000
|
||||
infill_extrusion_width = 0.68
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.68
|
||||
support_material_speed = 40
|
||||
support_material_contact_distance = 0.15
|
||||
support_material_extrusion_width = 0.55
|
||||
support_material_xy_spacing = 80%
|
||||
top_infill_extrusion_width = 0.6
|
||||
travel_speed = 150
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gco
|
||||
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.08mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.08mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 10
|
||||
bridge_flow_ratio = 0.7
|
||||
layer_height = 0.08
|
||||
support_material_contact_distance = 0.06
|
||||
support_material_spacing = 1.5
|
||||
top_solid_layers = 12
|
||||
|
||||
[print:0.08mm DETAIL @FLSUN]
|
||||
inherits = *0.08mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bridge_acceleration = 200
|
||||
bridge_speed = 20
|
||||
external_perimeter_speed = 70%
|
||||
first_layer_acceleration = 500
|
||||
first_layer_speed = 40%
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 80
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
small_perimeter_speed = 70%
|
||||
solid_infill_speed = 95%
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 60%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.15mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.15mm_vase_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
avoid_crossing_perimeters = 1
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_flow_ratio = 0.9
|
||||
elefant_foot_compensation = 0.15
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.9
|
||||
extra_perimeters = 1
|
||||
extrusion_width = 0.9
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_height = 0.3
|
||||
first_layer_extrusion_width = 0.9
|
||||
first_layer_speed = 20
|
||||
fill_density = 0%
|
||||
infill_extrusion_width = 0.9
|
||||
ironing = 0
|
||||
layer_height = 0.15
|
||||
min_skirt_length = 4
|
||||
max_print_speed = 100
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
perimeters = 1
|
||||
perimeter_extrusion_width = 0.9
|
||||
seam_position = aligned
|
||||
slice_closing_radius = 0.049
|
||||
solid_infill_extrusion_width = 0.6
|
||||
spiral_vase = 1
|
||||
support_material = 0
|
||||
top_solid_infill_speed = 40%
|
||||
top_solid_min_thickness = 0.6
|
||||
thin_walls = 0
|
||||
top_fill_pattern = rectilinear
|
||||
top_solid_layers = 0
|
||||
|
||||
[print:0.15mm VASE @FLSUN]
|
||||
inherits = *0.15mm_vase_flsunq*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bottom_solid_layers = 5
|
||||
external_perimeter_speed = 50%
|
||||
gap_fill_speed = 40
|
||||
infill_speed = 100
|
||||
perimeter_speed = 80
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 33%
|
||||
|
||||
[print:0.15mm VASE SPEED @FLSUN]
|
||||
inherits = *0.15mm_vase_flsunq*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bridge_speed = 80
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_speed = 60%
|
||||
gap_fill_speed = 30
|
||||
infill_speed = 80
|
||||
perimeter_speed = 90
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 80%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.16mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.16mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 5
|
||||
bridge_flow_ratio = 0.9
|
||||
layer_height = 0.16
|
||||
support_material_contact_distance = 0.12
|
||||
top_solid_layers = 6
|
||||
|
||||
[print:0.16mm QUALITY @FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
infill_speed = 80
|
||||
ironing = 0
|
||||
perimeter_speed = 90
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 50%
|
||||
top_solid_infill_speed = 30%
|
||||
|
||||
[print:0.16mm SPEED @FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 30%
|
||||
|
||||
[print:0.16mm DETAIL @0.6 nozzle FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.16mm DETAIL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 70
|
||||
max_print_speed = 80
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
infill_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.20mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
layer_height = 0.20
|
||||
support_material_contact_distance = 0.2
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:0.20mm QUALITY @FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *QQSP*
|
||||
avoid_crossing_perimeters = 1
|
||||
bridge_speed = 60
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
fill_density = 15%
|
||||
gap_fill_speed = 30
|
||||
infill_speed = 80
|
||||
ironing = 0
|
||||
ironing_speed = 20
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 85%
|
||||
solid_infill_speed = 90%
|
||||
thin_walls = 0
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
[print:0.20mm DETAIL @0.6 nozzle FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.20mm DETAIL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 70
|
||||
max_print_speed = 80
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
infill_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
|
||||
[print:0.20mm SPEED @FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50
|
||||
extra_perimeters = 1
|
||||
first_layer_speed = 35
|
||||
infill_speed = 90
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 40%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.24mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.24mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
layer_height = 0.24
|
||||
support_material_contact_distance = 0.18
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.24mm DRAFT @FLSUN]
|
||||
inherits = *0.24mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
first_layer_speed = 20%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 95%
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.30mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.30mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
bridge_flow_ratio = 0.95
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
extrusion_width = 0.5
|
||||
infill_extrusion_width = 0.5
|
||||
layer_height = 0.30
|
||||
perimeter_extrusion_width = 0.5
|
||||
solid_infill_extrusion_width = 0.5
|
||||
support_material_contact_distance = 0.22
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.30mm QUALITY @0.6 nozzle FLSUN]
|
||||
inherits = *0.30mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.30mm QUALITY
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 90
|
||||
max_print_speed = 100
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 65
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
|
||||
[print:0.30mm SPEED @FLSUN]
|
||||
inherits = *0.30mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
first_layer_speed = 20%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 80
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.35mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.35mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 40
|
||||
first_layer_extrusion_width = 0.75
|
||||
layer_height = 0.35
|
||||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 50
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.35mm SPEED @0.6 nozzle FLSUN]
|
||||
inherits = *0.35mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.35mm SPEED
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 45
|
||||
infill_speed = 100
|
||||
max_print_speed = 120
|
||||
perimeter_speed = 65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.40mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.40mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 40
|
||||
first_layer_extrusion_width = 0.65
|
||||
infill_acceleration = 2000
|
||||
infill_speed = 60
|
||||
layer_height = 0.4
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.65
|
||||
perimeter_speed = 50
|
||||
solid_infill_extrusion_width = 0.65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.40mm DRAFT @0.6 nozzle FLSUN]
|
||||
inherits = *0.40mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.40mm DRAFT
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 60
|
||||
infill_speed = 100
|
||||
max_print_speed = 120
|
||||
perimeter_speed = 60
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 60
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
infill_extrusion_width = 0.68
|
||||
solid_infill_extrusion_width = 0.68
|
||||
|
||||
#########################################
|
||||
########### end print presets ###########
|
||||
#########################################
|
||||
|
||||
#########################################
|
||||
######## begin filament presets #########
|
||||
#########################################
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common_flsunq*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_fan_speed = 20
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 15
|
||||
start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n"
|
||||
|
||||
[filament:*PLA_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 95
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = 30
|
||||
filament_retract_length = 3
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = 30
|
||||
filament_max_volumetric_speed = 10
|
||||
filament_type = PLA
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 205
|
||||
max_fan_speed = 90
|
||||
min_fan_speed = 50
|
||||
temperature = 200
|
||||
|
||||
[filament:*PLA_VASE_flsunq*]
|
||||
inherits = *PLA_flsunq*
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 60
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
|
||||
[filament:*SPLA_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #008000
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = 70
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_length = 7.5
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = 70
|
||||
filament_type = PLA
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 50
|
||||
temperature = 215
|
||||
|
||||
[filament:*PET_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FFFFFF
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_length = 4
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 45
|
||||
filament_type = PETG
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature =80
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
temperature = 230
|
||||
|
||||
[filament:*FLEX_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.15
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #0000FF
|
||||
filament_density = 1.22
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 1.35
|
||||
filament_retract_length = 0.8
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = nil
|
||||
filament_type = FLEX
|
||||
filament_wipe = 0
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n;M900 K0; Disable Linear Advance 1.5\n"
|
||||
temperature = 240
|
||||
|
||||
[filament:*ABS_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 30
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_density = 1.04
|
||||
filament_deretract_speed = nil
|
||||
filament_retract_length = 5
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = 50
|
||||
filament_max_volumetric_speed = 10
|
||||
filament_type = ABS
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 245
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
slowdown_below_layer_time = 20
|
||||
temperature = 245
|
||||
top_fan_speed = 0
|
||||
|
||||
[filament:Generic PLA @FLSUN]
|
||||
inherits = *PLA_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic PLA VASE @FLSUN]
|
||||
inherits = *PLA_VASE_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic PETG @FLSUN]
|
||||
inherits = *PET_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic ABS @FLSUN]
|
||||
inherits = *ABS_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic FLEX @FLSUN]
|
||||
inherits = *FLEX_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic SPLA @FLSUN]
|
||||
inherits = *SPLA_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
#########################################
|
||||
######### end filament presets ##########
|
||||
#########################################
|
||||
|
||||
#########################################
|
||||
######### begin printer presets #########
|
||||
#########################################
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common_flsunq*]
|
||||
printer_technology = FFF
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 40
|
||||
end_gcode =
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
nozzle_diameter = 0.4
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 70%
|
||||
retract_layer_change = 0
|
||||
retract_length = 0
|
||||
retract_length_toolchange = 1
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
default_print_profile = 0.20mm QUALITY @FLSUN
|
||||
default_filament_profile = Generic PLA @FLSUN
|
||||
|
||||
[printer:FLSun QQS Pro]
|
||||
inherits = *common_flsunq*
|
||||
bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14
|
||||
end_gcode = ; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.
|
||||
machine_max_acceleration_e = 3000,800
|
||||
machine_max_acceleration_extruding = 1500,800
|
||||
machine_max_acceleration_retracting = 2000,800
|
||||
machine_max_acceleration_x = 1500,800
|
||||
machine_max_acceleration_y = 1500,800
|
||||
machine_max_acceleration_z = 1500,800
|
||||
machine_max_feedrate_e = 60,30
|
||||
machine_max_feedrate_x = 200,150
|
||||
machine_max_feedrate_y = 200,150
|
||||
machine_max_feedrate_z = 200,150
|
||||
machine_max_jerk_e = 5,5
|
||||
machine_max_jerk_x = 5,10
|
||||
machine_max_jerk_y = 5,10
|
||||
machine_max_jerk_z = 5,10
|
||||
max_print_height = 360
|
||||
nozzle_diameter = 0.4
|
||||
printer_model = QQSP
|
||||
printer_variant = 0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQSP\nPRINTER_HAS_BOWDEN\n
|
||||
retract_length = 5
|
||||
retract_speed = 30
|
||||
retract_lift = 0.4
|
||||
silent_mode = 1
|
||||
start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250 ; wait between dual beep\nM300 S440 P200 ; 2nd beep for printer ready\nG4 S10 ; wait to clean the nozzle\nM300 S440 P200 ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...
|
||||
thumbnails = 16x16,260x260
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
|
||||
[printer:FLSun QQS Pro 0.6 nozzle]
|
||||
inherits = FLSun QQS Pro
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
|
||||
retract_length = 3.5
|
||||
retract_lift = 0.4
|
||||
retract_speed = 30
|
||||
deretract_speed = 40
|
||||
retract_before_wipe = 70%
|
||||
retract_before_travel = 1
|
||||
|
||||
[printer:FLSun Q5]
|
||||
inherits = *common_flsunq*
|
||||
bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
|
||||
end_gcode = M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n
|
||||
machine_max_acceleration_e = 3000
|
||||
machine_max_acceleration_extruding = 1500
|
||||
machine_max_acceleration_retracting = 2000
|
||||
machine_max_acceleration_x = 1500
|
||||
machine_max_acceleration_y = 1500
|
||||
machine_max_acceleration_z = 1500
|
||||
machine_max_feedrate_e = 60
|
||||
machine_max_feedrate_x = 200
|
||||
machine_max_feedrate_y = 200
|
||||
machine_max_feedrate_z = 200
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 5
|
||||
machine_max_jerk_y = 5
|
||||
machine_max_jerk_z = 5
|
||||
max_print_height = 200
|
||||
nozzle_diameter = 0.4
|
||||
printer_model = Q5
|
||||
printer_variant = 0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n
|
||||
retract_length = 3
|
||||
retract_lift = 0.3
|
||||
start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n
|
||||
thumbnails = 16x16,200x200
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
|
||||
[printer:FLSun Q5 0.6 nozzle]
|
||||
inherits = FLSun Q5
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
|
||||
retract_length = 3
|
||||
retract_lift = 0.4
|
||||
retract_speed = 50
|
||||
deretract_speed = 40
|
||||
retract_before_wipe = 0
|
||||
retract_before_travel = 1
|
||||
|
||||
#########################################
|
||||
####### end common print presets ########
|
||||
#########################################
|
||||
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 19 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB |
@ -1,5 +0,0 @@
|
||||
min_slic3r_version = 2.1.0
|
||||
0.0.3-susi remove resolution to use default
|
||||
0.0.3 slic3r++ adaptation: overlapping & top pattern.
|
||||
0.0.2 changed flow ratio from float to %
|
||||
0.0.1 Initial version
|
||||
@ -1,377 +0,0 @@
|
||||
# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = LulzBot
|
||||
config_version = 0.0.3-susi
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
|
||||
|
||||
[printer_model:MINI_AERO]
|
||||
name = Mini Aero
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
#bed_model = mini_bed.stl
|
||||
#bed_texture = mini.svg
|
||||
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
|
||||
|
||||
[printer_model:TAZ6_AERO]
|
||||
name = Taz6 Aero
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
|
||||
|
||||
[print:0.3mm @lulzbot]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bridge_acceleration = 500
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 100%
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 500
|
||||
dont_support_bridges = 1
|
||||
first_layer_size_compensation = 0
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.56
|
||||
external_perimeter_speed = 50%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.56
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 500
|
||||
first_layer_extrusion_width = 0.6
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 40%
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 500
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.56
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 60
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 0
|
||||
notes =
|
||||
only_one_perimeter_top = 1
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 500
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.56
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
raft_layers = 0
|
||||
seam_position = hidden
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 3
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.56
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance_type = filament
|
||||
support_material_contact_distance_top = 0.2
|
||||
support_material_contact_distance_bottom = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.44
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_perimeters = 1
|
||||
thin_walls = 1
|
||||
thin_walls_min_width = 50%
|
||||
thin_walls_overlap = 50%
|
||||
threads = 12
|
||||
top_fill_pattern = smooth
|
||||
top_infill_extrusion_width = 0.52
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 3
|
||||
travel_speed = 175
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
[filament:ColorFabb PLA-PHA @lulzbot]
|
||||
filament_vendor = ColorFabb
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 2.85
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 200
|
||||
|
||||
[filament:PrintedSolid Jesse PLA @lulzbot]
|
||||
filament_vendor = PrintedSolid
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 27
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 2.85
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 220
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 220
|
||||
|
||||
[printer:Mini Aero 0.5mm]
|
||||
printer_model = MINI_AERO
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.3mm @lulzbot
|
||||
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
|
||||
bed_shape = 0x0,154x0,154x154,0x154
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
deretract_speed = 20
|
||||
end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG92 E1 ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000 ; move to cooling position\nG1 E1 ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77 ; Stop GLCD Timer\nG1 X145 F1000 ; move extruder out of the way\nG1 Y175 F1000 ; present finished print\nM140 S0; cool downs\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 100,200
|
||||
machine_max_feedrate_e = 40,120
|
||||
machine_max_feedrate_x = 800,200
|
||||
machine_max_feedrate_y = 800,200
|
||||
machine_max_feedrate_z = 8,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 20,10
|
||||
machine_max_jerk_y = 20,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 158
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.5
|
||||
parking_pos_retraction = 92
|
||||
printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 1
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
[printer:Taz6 Aero 0.5mm]
|
||||
printer_model = TAZ6_AERO
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.3mm @lulzbot
|
||||
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
|
||||
bed_shape = 0x0,280x0,280x280,0x280
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
deretract_speed = 20
|
||||
end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 1000,5000
|
||||
machine_max_acceleration_extruding = 1000,1250
|
||||
machine_max_acceleration_retracting = 1000,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 100,200
|
||||
machine_max_feedrate_e = 40,120
|
||||
machine_max_feedrate_x = 800,200
|
||||
machine_max_feedrate_y = 800,200
|
||||
machine_max_feedrate_z = 3,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 12,10
|
||||
machine_max_jerk_y = 12,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 250
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.5
|
||||
parking_pos_retraction = 92
|
||||
printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
|
||||
printer_technology = FFF
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 48 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 42 KiB |
@ -1,161 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-rc1
|
||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.2.1 Updated FW version for MK2.5 family printers.
|
||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
1.2.0-susi remove resolution to use default
|
||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
||||
min_slic3r_version = 2.3.0-beta0
|
||||
1.2.1-beta0 remove G92 in layer change, as it's not understand by the slicer.
|
||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha4
|
||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.2.0-alpha0 Added filament spool weights
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.1.11 SuperSlicer version
|
||||
1.1.10 Updated firmware version.
|
||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
||||
1.1.4 Added Prusament PC Blend filament profile.
|
||||
1.1.3 Added SLA material and filament profile
|
||||
1.1.6 superslicer: thumbnails & remove top_fan_speed
|
||||
1.1.5 slic3r++ adaptation: overlapping & top pattern.
|
||||
1.1.4 changed flow ratio from float to %
|
||||
1.1.3 slic3r++ version
|
||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 12.2.0
|
||||
min_slic3r_version = 2.1.0
|
||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
||||
min_slic3r_version = 2.1.1-beta0
|
||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
||||
1.0.7 Updated layer height limits for MINI
|
||||
1.0.6 Added Prusa MINI profiles
|
||||
min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.5 Added SLA materials
|
||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
||||
1.0.3 Added filament profiles
|
||||
1.0.2 Added SLA materials
|
||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
||||
1.0.0-alpha1 Added Prusament ASA profile
|
||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.7 Updated firmware version
|
||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.8.5 Updated SL1 printer and material settings
|
||||
0.8.4 Added Prusament ASA profile
|
||||
0.8.3 FW version and SL1 materials update
|
||||
0.8.2 FFF and SL1 settings update
|
||||
0.8.1 Output settings and SLA materials update
|
||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.8.0-rc1 Updated SLA profiles
|
||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
||||
0.8.0-beta4 Updated SLA profiles
|
||||
0.8.0-beta3 Updated SLA profiles
|
||||
0.8.0-beta2 Updated SLA profiles
|
||||
0.8.0-beta1 Updated SLA profiles
|
||||
0.8.0-beta Updated SLA profiles
|
||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
||||
0.8.0-alpha8 Updated SLA profiles
|
||||
0.8.0-alpha7 Updated SLA profiles
|
||||
0.8.0-alpha6 Updated SLA profiles
|
||||
min_slic3r_version = 1.42.0-alpha
|
||||
0.8.0-alpha Updated SLA profiles
|
||||
0.4.0-alpha4 Updated SLA profiles
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.10 Updated firmware version
|
||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.4.8 MK2.5/3/S FW update
|
||||
0.4.7 MK2/S/MMU FW update
|
||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.1 New MK2.5S and MK3S FW versions
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.3.10 Updated firmware version
|
||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.3.8 MK2.5/3/S FW update
|
||||
0.3.7 MK2/S/MMU FW update
|
||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||
0.3.5 New MK2.5 and MK3 FW versions
|
||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.3.3 Prusament PETG released
|
||||
0.3.2 New MK2.5 and MK3 FW versions
|
||||
0.3.1 New MK2.5 and MK3 FW versions
|
||||
0.3.0 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.9 New MK2.5 and MK3 FW versions
|
||||
0.2.8 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.1
|
||||
0.2.7 New MK2.5 and MK3 FW version
|
||||
0.2.6 Added MMU2 MK2.5 settings
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.5 Prusament is out - added prusament settings
|
||||
0.2.4 Added soluble support profiles for MMU2
|
||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
||||
0.2.2 Edited MMU2 Single mode purge line
|
||||
0.2.1 Added PET and BVOH settings for MMU2
|
||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.18 Updated firmware version
|
||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.1.16 MK2.5/3/S FW update
|
||||
0.1.15 MK2/S/MMU FW update
|
||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||
0.1.13 New MK2.5 and MK3 FW versions
|
||||
0.1.12 New MK2.5 and MK3 FW versions
|
||||
0.1.11 fw version changed to 3.3.1
|
||||
0.1.10 MK3 jerk and acceleration update
|
||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
||||
0.1.6 Split the MK2.5 profile from the MK2S
|
||||
min_slic3r_version = 1.40.0-beta
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
0.1.4 edited fw version, added z-raise after print
|
||||
min_slic3r_version = 1.40.0-alpha
|
||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||
0.1.2 Wipe tower changes
|
||||
0.1.1 Minor print speed adjustments
|
||||
0.1.0 Initial
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 56 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 57 KiB |
Some files were not shown because too many files have changed in this diff Show More
Loading…
x
Reference in New Issue
Block a user