GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-08-14 01:25:56 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

more conventional defaults.

Browse Source
This commit is contained in:
supermerill 2018-09-26 17:32:04 +02:00
parent 8e5cc9c906
commit 17e330bc00
1 changed files with 7 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
xs/src/libslic3r/PrintConfig.cpp
View File

@ -264,11 +264,10 @@ PrintConfigDef::PrintConfigDef()
def = this->add("elefant_foot_compensation", coFloat);
def->label = L("First layer");
def->category = L("Advanced");
def->tooltip = L("The first layer will be shrunk in the XY plane by the configured value "
"to compensate for the 1st layer squish aka an Elephant Foot effect. (must be negative = inwards)");
def->tooltip = L("The first layer will be grown / shrunk in the XY plane by the configured value "
"to compensate for the 1st layer squish aka an Elephant Foot effect. (should be negative = inwards)");
def->sidetext = L("mm");
def->cli = "elefant-foot-compensation=f";
def->max = 0;
def->default_value = new ConfigOptionFloat(0);
def = this->add("end_gcode", coString);
@ -320,8 +319,8 @@ PrintConfigDef::PrintConfigDef()
def->enum_labels.push_back(L("Archimedean Chords"));
def->enum_labels.push_back(L("Octagram Spiral"));
def->enum_labels.push_back("Ironing");
def->enum_labels.push_back("Ironing (triple)");
def->enum_labels.push_back("Ironing (hilbert)");
//def->enum_labels.push_back("Ironing (triple)");
//def->enum_labels.push_back("Ironing (hilbert)");
// solid_fill_pattern is an obsolete equivalent to top_fill_pattern/bottom_fill_pattern.
def->aliases.push_back("solid_fill_pattern");
def->default_value = new ConfigOptionEnum<InfillPattern>(ipRectilinear);
@ -776,7 +775,7 @@ PrintConfigDef::PrintConfigDef()
def->enum_labels.push_back("55");
def->enum_labels.push_back("75");
def->enum_labels.push_back("100");
def->default_value = new ConfigOptionPercent(20);
def->default_value = new ConfigOptionPercent(18);
def = this->add("fill_pattern", coEnum);
def->label = L("Inside");
@ -953,7 +952,7 @@ PrintConfigDef::PrintConfigDef()
def->category = L("Infill");
def->tooltip = L("Enable the creation of a support layer under the first solid layer. Allow to use lower infill ratio without compromizing the top quality");
def->cli = "infill-dense!";
def->default_value = new ConfigOptionBool(1);
def->default_value = new ConfigOptionBool(false);
def = this->add("infill_extruder", coInt);
def->label = L("Infill extruder");
@ -2253,7 +2252,7 @@ PrintConfigDef::PrintConfigDef()
def = this->add("hole_size_compensation", coFloat);
def->label = L("Holes");
def->category = L("Advanced");
def->tooltip = L("The convex holes will be grown in the XY plane by the configured value"
def->tooltip = L("The convex holes will be grown / shrunk in the XY plane by the configured value"
" (negative = inwards, positive = outwards, should be positive as the holes are always a bit smaller)."
" This might be useful for fine-tuning hole sizes.");
def->sidetext = L("mm");