GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-08-15 21:06:05 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Spelling and grammar in tooltips (#1345)

Browse Source 
Made numerous minor corrections or improvements to spelling and grammar in print settings tooltips
This commit is contained in:
Andy Brice 2021-06-21 17:45:41 +01:00 committed by remi durand
parent 2b9bda07d6
commit 22593685a3
1 changed files with 131 additions and 129 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

260
src/libslic3r/PrintConfig.cpp
View File

@ -85,7 +85,7 @@ void PrintConfigDef::init_common_params()
def->label = L("Color");
def->full_label = L("Thumbnail color");
def->category = OptionCategory::filament;
def->tooltip = L("This is the color that will be enforce on objects in the thumbnails.");
def->tooltip = L("This is the color that will be enforced on objects in the thumbnails.");
def->gui_type = "color";
def->mode = comExpert;
def->set_default_value(new ConfigOptionString("#018aff"));
@ -461,7 +461,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Detection radius");
def->full_label = L("Brim ear detection length");
def->category = OptionCategory::skirtBrim;
def->tooltip = L("The geometry will be decimated before dectecting sharp angles. This parameter indicate the minimum length of the deviation for the decimation."
def->tooltip = L("The geometry will be decimated before dectecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation."
"\n0 to deactivate");
def->sidetext = L("mm");
def->min = 0;
@ -472,7 +472,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Pattern");
def->full_label = L("Ear pattern");
def->category = OptionCategory::infill;
def->tooltip = L("Pattern for the ear. The concentric id the default one."
def->tooltip = L("Pattern for the ear. The concentric is the default one."
" The rectilinear has a perimeter around it, you can try it if the concentric has too many problems to stick to the build plate.");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values.push_back("concentric");
@ -485,7 +485,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("brim_offset", coFloat);
def->label = L("Brim offset");
def->category = OptionCategory::skirtBrim;
def->tooltip = L("Distance between the brim and the part. Should be kept at 0 unless you encounter great difficulties to separate them. It's subtracted to brim_width and brim_width_interior., so it has to be lower than them");
def->tooltip = L("Distance between the brim and the part. Should be kept at 0 unless you encounter great difficulties to separate them. It's subtracted to brim_width and brim_width_interior, so it has to be lower than them");
def->sidetext = L("mm");
def->min = 0;
def->mode = comExpert;
@ -495,7 +495,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Chamber");
def->full_label = L("Chamber temperature");
def->category = OptionCategory::cooling;
def->tooltip = L("Chamber temperature0. Note that this setting doesn't do anything, but you can access it in Start G-code, Tool change G-code and the other ones, like for other temperature settings.");
def->tooltip = L("Chamber temperature. Note that this setting doesn't do anything, but you can access it in Start G-code, Tool change G-code and the other ones, like for other temperature settings.");
def->sidetext = L("°C");
def->min = 0;
def->max = 300;
@ -768,8 +768,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("solid_fill_pattern", coEnum);
def->label = L("Solid pattern");
def->category = OptionCategory::infill;
def->tooltip = L("Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear is most cases. You can try ironing for transluscnet material."
" Rectilinear (filled) replace zig-zag patterns by a single big line & is more efficient for filling little spaces.");
def->tooltip = L("Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear in most cases. You can try ironing for translucent material."
" Rectilinear (filled) replaces zig-zag patterns by a single big line & is more efficient for filling little spaces.");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values.push_back("smooth");
def->enum_values.push_back("rectilinear");
@ -806,7 +806,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Default");
def->full_label = L("Default infill margin");
def->category = OptionCategory::infill;
def->tooltip = L("This parameter grows the top/bottom/solid layers by the specified MM to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the perimeters.");
def->tooltip = L("This parameter grows the top/bottom/solid layers by the specified mm to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the perimeters.");
def->sidetext = L("mm/%");
def->ratio_over = "perimeter_extrusion_width";
def->min = 0;
@ -817,7 +817,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Bridged");
def->full_label = L("Bridge margin");
def->category = OptionCategory::infill;
def->tooltip = L("This parameter grows the bridged solid infill layers by the specified MM to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the external perimeter.");
def->tooltip = L("This parameter grows the bridged solid infill layers by the specified mm to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the external perimeter.");
def->sidetext = L("mm/%");
def->ratio_over = "external_perimeter_extrusion_width";
def->min = 0;
@ -861,10 +861,10 @@ void PrintConfigDef::init_fff_params()
def->label = L("Cutting corners");
def->full_label = L("Ext. peri. cut corners");
def->category = OptionCategory::width;
def->tooltip = L("Activate this option to modify the flow to acknoledge that the nozzle is round and the corners will have a round shape, and so change the flow to realized that and avoid over-extrusion."
def->tooltip = L("Activate this option to modify the flow to acknowledge that the nozzle is round and the corners will have a round shape, and so change the flow to realize that and avoid over-extrusion."
" 100% is activated, 0% is deactivated and 50% is half-activated."
"\nNote: At 100% this change the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use of it.");
"\nNote: At 100% this changes the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it.");
def->sidetext = L("%");
def->mode = comExpert;
def->set_default_value(new ConfigOptionPercent(0));
@ -886,9 +886,9 @@ void PrintConfigDef::init_fff_params()
def->label = L("external perimeter overlap");
def->full_label = L("Ext. peri. overlap");
def->category = OptionCategory::width;
def->tooltip = L("This setting allow you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters artifacts."
" 100% means that no gaps is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use of it.");
def->tooltip = L("This setting allows you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters' artifacts."
" 100% means that no gap is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it.");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
@ -899,8 +899,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("perimeter overlap");
def->full_label = L("Perimeter overlap");
def->category = OptionCategory::width;
def->tooltip = L("This setting allow you to reduce the overlap between the perimeters, to reduce the impact of the perimeters artifacts."
" 100% means that no gaps is left, and 0% means that perimeters are not touching each other anymore."
def->tooltip = L("This setting allows you to reduce the overlap between the perimeters, to reduce the impact of the perimeters' artifacts."
" 100% means that no gap is left, and 0% means that perimeters are not touching each other anymore."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it.");
def->sidetext = L("%");
def->min = 0;
@ -912,12 +912,12 @@ void PrintConfigDef::init_fff_params()
def->label = L("Better bonding");
def->full_label = L("Perimeter bonding");
def->category = OptionCategory::perimeter;
def->tooltip = L("This setting may degrad a bit the quality of your external perimeter, in exchange for a better bonding between perimeters."
def->tooltip = L("This setting may slightly degrade the quality of your external perimeter, in exchange for a better bonding between perimeters."
"Use it if you have great difficulties with perimeter bonding, for example with high temperature filaments."
"\nThis percentage is the % of overlap between perimeters, a bit like perimeter_overlap and external_perimeter_overlap, but in reverse."
" You have to set perimeter_overlap and external_perimeter_overlap to 100%, or this setting has no effect."
" 0: no effect, 50%: half of the nozzle will be over an already extruded perimeter while extruding a new one"
", unless it's an external ones)."
", unless it's an external one)."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it.");
def->sidetext = L("%");
def->min = 0;
@ -951,11 +951,11 @@ void PrintConfigDef::init_fff_params()
def->label = L("In vase mode (no seam)");
def->full_label = L("ExternalPerimeter in vase mode");
def->category = OptionCategory::perimeter;
def->tooltip = L("Print contour perimeters in two circle, in a contiunous way, like for a vase mode. It needs the external_perimeters_first parameter do work."
def->tooltip = L("Print contour perimeters in two circles, in a continuous way, like for a vase mode. It needs the external_perimeters_first parameter to work."
" \nDoesn't work for the first layer, as it may damage the bed overwise."
" \nNote that It will use min_layer_height from your hardware setting as the base height (it doesn't start at 0)"
" \nNote that it will use min_layer_height from your hardware setting as the base height (it doesn't start at 0)"
", so be sure to put here the lowest value your printer can handle."
" if it's not lower than two times the current layer height, it falls back to the normal algorithm, as there are not enough room to do two loops.");
" if it's not lower than two times the current layer height, it falls back to the normal algorithm, as there is not enough room to do two loops.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(false));
@ -963,7 +963,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Only for outer side");
def->full_label = L("Ext peri first for outer side");
def->category = OptionCategory::perimeter;
def->tooltip = L("Only do the vase trick on the external side. Useful when the thikness is too low.");
def->tooltip = L("Only do the vase trick on the external side. Useful when the thickness is too low.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));
@ -971,7 +971,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Only for inner side");
def->full_label = L("ext peri first for inner side");
def->category = OptionCategory::perimeter;
def->tooltip = L("Only do the vase trick on the external side. Useful when you only want to remode seam from screw hole.");
def->tooltip = L("Only do the vase trick on the external side. Useful when you only want to remove seam from screw hole.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));
@ -1007,8 +1007,8 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Add more perimeters when needed for avoiding gaps in sloping walls. "
"Slic3r keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
"\nIf you succeed to trigger the algorihtm behind this setting, please send me a message."
" Personally, i think it's useless.");
"\nIf you succeed in triggering the algorithm behind this setting, please send me a message."
" Personally, I think it's useless.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(false));
@ -1017,9 +1017,9 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Extra perimeters over overhangs");
def->category = OptionCategory::perimeter;
def->tooltip = L("Add more perimeters when needed for avoiding gaps in sloping walls. "
"Slic3r keeps adding perimeter until all overhangs are filled."
"Slic3r keeps adding perimeters until all overhangs are filled."
"\n!! this is a very slow algorithm !!"
"\nIf you use this setting, consider strongly using also overhangs_reverse.");
"\nIf you use this setting, strongly consider also using overhangs_reverse.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
@ -1027,7 +1027,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("On odd layers");
def->full_label = L("Extra perimeter on odd layers");
def->category = OptionCategory::perimeter;
def->tooltip = L("Add one perimeter every odd layer. With this, infill is taken into sandwitch"
def->tooltip = L("Add one perimeter every odd layer. With this, infill is taken into the sandwich"
" and you may be able to reduce drastically the infill/perimeter overlap setting. ");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
@ -1035,7 +1035,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("only_one_perimeter_top", coBool);
def->label = L("Only one perimeter on Top surfaces");
def->category = OptionCategory::perimeter;
def->tooltip = L("Use only one perimeter on flat top surface, to let more space to the top infill pattern.");
def->tooltip = L("Use only one perimeter on flat top surface, to give more space to the top infill pattern.");
def->set_default_value(new ConfigOptionBool(true));
def = this->add("only_one_perimeter_top_other_algo", coBool);
@ -1070,7 +1070,7 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Set this to the vertical distance between your nozzle tip and (usually) the X carriage rods. "
"In other words, this is the height of the clearance cylinder around your extruder, "
"and it represents the maximum depth the extruder can peek before colliding with "
"other printed objects.");
"other printed objects."); // TODO: "peek?" is this the correct word?
def->sidetext = L("mm");
def->min = 0;
def->mode = comExpert;
@ -1112,7 +1112,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("extruder_temperature_offset", coFloats);
def->label = L("Extruder temp offset");
def->category = OptionCategory::extruders;
def->tooltip = L("This offset will be added to all extruder temperature set by the filament settings."
def->tooltip = L("This offset will be added to all extruder temperatures set in the filament settings."
"\nNote that you should set 'M104 S{first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]}'"
"\ninstead of 'M104 S[first_layer_temperature]' in the start_gcode");
def->sidetext = L("°C");
@ -1122,7 +1122,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("extruder_fan_offset", coPercents);
def->label = L("Extruder fan offset");
def->category = OptionCategory::extruders;
def->tooltip = L("This offset wil be add to all fan value set by the filament properties. It won't make them go higher than 100% and lower than 0%.");
def->tooltip = L("This offset wil be added to all fan values set in the filament properties. It won't make them go higher than 100% nor lower than 0%.");
def->sidetext = L("%");
def->mode = comExpert;
def->set_default_value(new ConfigOptionPercents{ 0 });
@ -1131,7 +1131,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("extrusion_axis", coString);
def->label = L("Extrusion axis");
def->category = OptionCategory::extruders;
def->tooltip = L("Use this option to set the axis letter associated to your printer's extruder "
def->tooltip = L("Use this option to set the axis letter associated with your printer's extruder "
"(usually E but some printers use A).");
def->set_default_value(new ConfigOptionString("E"));
@ -1154,7 +1154,7 @@ void PrintConfigDef::init_fff_params()
"Usual values are between 90% and 110%. If you think you need to change this more, "
"check filament diameter and your firmware E steps."
" This print setting is multiplied against the extrusion_multiplier from the filament tab."
" Its only purpose is to offer the same functionality but with a per-object basis.");
" Its only purpose is to offer the same functionality but on a per-object basis."); // TODO: replace "against" with "with"?
def->sidetext = L("%");
def->mode = comSimple;
def->min = 2;
@ -1194,7 +1194,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("fan_always_on", coBools);
def->label = L("Keep fan always on");
def->category = OptionCategory::cooling;
def->tooltip = L("If this is enabled, fan will continuously run at base speed if no setting override the speed."
def->tooltip = L("If this is enabled, fan will continuously run at base speed if no other setting overrides that speed."
" Useful for PLA, harmful for ABS.");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBools{ false });
@ -1261,7 +1261,7 @@ void PrintConfigDef::init_fff_params()
"\n - SCAFF: 35%"
"\n - FLEX: 35%"
"\n - OTHERS: 100%"
"\nNote that the wipe tower reset the speed at 100% for the unretract in any case."
"\nNote that the wipe tower reset the speed at 100% for the unretract in any case." // TODO: "reset" -> "resets"?
"\nIf using marlin, M220 B/R is used to save the speed override before the wipe tower print.");
def->sidetext = L("%");
def->min = 0;
@ -1406,7 +1406,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_cooling_initial_speed", coFloats);
def->label = L("Speed of the first cooling move");
def->tooltip = L("Cooling moves are gradually accelerating beginning at this speed. ");
def->tooltip = L("Cooling moves are gradually accelerated, starting at this speed. ");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comExpert;
@ -1425,7 +1425,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_cooling_final_speed", coFloats);
def->label = L("Speed of the last cooling move");
def->tooltip = L("Cooling moves are gradually accelerating towards this speed. ");
def->tooltip = L("Cooling moves are gradually accelerated towards this speed. ");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comExpert;
@ -1466,9 +1466,9 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_shrink", coPercents);
def->label = L("Shrinkage");
def->tooltip = L("Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm)."
" The part will be scaled in xy to conpensate."
" The part will be scaled in xy to compensate."
" Only the filament used for the perimeter is taken into account."
"\nBe sure to let enough space between objects, as this compensation is done after the checks.");
"\nBe sure to allow enough space between objects, as this compensation is done after the checks.");
def->sidetext = L("%");
def->min = 10;
def->mode = comExpert;
@ -1577,7 +1577,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::infill;
def->tooltip = L("Add this angle each layer to the base angle for infill. "
"May be useful for art, or to be sure to hit every object's feature even with very low infill. "
"Still experiemental, tell me what makes it useful, or the problems that arise using it.");
"Still experimental, tell me what makes it useful, or the problems that arise using it.");
def->sidetext = L("°");
def->min = 0;
def->max = 360;
@ -1668,7 +1668,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Top fill flow ratio");
def->sidetext = L("%");
def->category = OptionCategory::width;
def->tooltip = L("You can increase this to over-extrude on the top layer if there are not enough plastic to make a good fill.");
def->tooltip = L("You can increase this to over-extrude on the top layer if there is not enough plastic to make a good fill.");
def->min = 0;
def->mode = comExpert;
def->set_default_value(new ConfigOptionPercent(100));
@ -1678,7 +1678,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("First layer flow ratio");
def->sidetext = L("%");
def->category = OptionCategory::width;
def->tooltip = L("You can increase this to over-extrude on the first layer if there are not enough plastic because your bed isn't levelled."
def->tooltip = L("You can increase this to over-extrude on the first layer if there is not enough plastic because your bed isn't levelled."
"\nNote: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED!"
" Use this setting only as last resort after all calibrations failed.");
def->min = 0;
@ -1797,7 +1797,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Default first layer speed");
def->category = OptionCategory::speed;
def->tooltip = L("If expressed as absolute value in mm/s, this speed will be applied to all the print moves "
"but infill of the first layer, it can be overwrite by the 'default' (default depends of the type of the path) "
"but infill of the first layer, it can be overwritten by the 'default' (default depends of the type of the path) "
"speed if it's lower than that. If expressed as a percentage "
"it will scale the current speed."
"\nSet it at 100% to remove any first layer speed modification (with first_layer_infill_speed).");
@ -1812,7 +1812,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Infill first layer speed");
def->category = OptionCategory::speed;
def->tooltip = L("If expressed as absolute value in mm/s, this speed will be applied to infill moves "
"of the first layer, it can be overwrite by the 'default' (solid infill or infill if not bottom) "
"of the first layer, it can be overwritten by the 'default' (solid infill or infill if not bottom) "
"speed if it's lower than that. If expressed as a percentage "
"(for example: 40%) it will scale the current infill speed.");
def->sidetext = L("mm/s or %");
@ -1866,8 +1866,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("Gap fill overlap");
def->full_label = L("Gap fill overlap");
def->category = OptionCategory::width;
def->tooltip = L("This setting allow you to reduce the overlap between the perimeters and the gap fill."
" 100% means that no gaps is left, and 0% means that the gap fill won't touch the perimeters."
def->tooltip = L("This setting allows you to reduce the overlap between the perimeters and the gap fill."
" 100% means that no gaps are left, and 0% means that the gap fill won't touch the perimeters."
"\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it.");
def->sidetext = L("%");
def->min = 0;
@ -1889,8 +1889,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("gcode_comments", coBool);
def->label = L("Verbose G-code");
def->category = OptionCategory::output;
def->tooltip = L("Enable this to get a commented G-code file, with each line explained by a descriptive text. "
"If you print from SD card, the additional weight of the file could make your firmware "
def->tooltip = L("Enable this to get a commented G-code file, with each line explained by descriptive text. "
"If you print from an SD card, the additional weight of the file could make your firmware "
"slow down.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(0));
@ -1944,14 +1944,14 @@ void PrintConfigDef::init_fff_params()
def = this->add("gcode_precision_xyz", coInt);
def->label = L("xyz decimals");
def->category = OptionCategory::output;
def->tooltip = L("Choose how many digit after the dot for xyz coordinates.");
def->tooltip = L("Choose how many digits after the dot for xyz coordinates.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionInt(3));
def = this->add("gcode_precision_e", coInts);
def->label = L("Extruder decimals");
def->category = OptionCategory::output;
def->tooltip = L("Choose how many digit after the dot for extruder moves.");
def->tooltip = L("Choose how many digits after the dot for extruder moves.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionInts{ 5 });
@ -1979,7 +1979,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("infill_every_layers", coInt);
def->label = L("Combine infill every");
def->category = OptionCategory::infill;
def->tooltip = L("This feature allows to combine infill and speed up your print by extruding thicker "
def->tooltip = L("This feature allows you to combine infill and speed up your print by extruding thicker "
"infill layers while preserving thin perimeters, thus accuracy.");
def->sidetext = L("layers");
def->full_label = L("Combine infill every n layers");
@ -2046,9 +2046,9 @@ void PrintConfigDef::init_fff_params()
def = this->add("infill_connection", coEnum);
def->label = L("Connection of sparse infill lines");
def->category = OptionCategory::infill;
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which periemters"
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which perimeters"
" Can be useful for art or with high infill/perimeter overlap."
" The result may varies between infill typers.");
" The result may vary between infill types.");
def->enum_keys_map = &ConfigOptionEnum<InfillConnection>::get_enum_values();
def->enum_values.push_back("connected");
def->enum_values.push_back("holes");
@ -2064,9 +2064,9 @@ void PrintConfigDef::init_fff_params()
def = this->add("infill_connection_top", coEnum);
def->label = L("Connection of top infill lines");
def->category = OptionCategory::infill;
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which periemters"
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which perimeters"
" Can be useful for art or with high infill/perimeter overlap."
" The result may varies between infill typers.");
" The result may vary between infill types.");
def->enum_keys_map = &ConfigOptionEnum<InfillConnection>::get_enum_values();
def->enum_values.push_back("connected");
def->enum_values.push_back("holes");
@ -2082,9 +2082,9 @@ void PrintConfigDef::init_fff_params()
def = this->add("infill_connection_bottom", coEnum);
def->label = L("Connection of bottom infill lines");
def->category = OptionCategory::infill;
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which periemters"
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which perimeters"
" Can be useful for art or with high infill/perimeter overlap."
" The result may varies between infill typers.");
" The result may vary between infill types.");
def->enum_keys_map = &ConfigOptionEnum<InfillConnection>::get_enum_values();
def->enum_values.push_back("connected");
def->enum_values.push_back("holes");
@ -2100,9 +2100,9 @@ void PrintConfigDef::init_fff_params()
def = this->add("infill_connection_solid", coEnum);
def->label = L("Connection of solid infill lines");
def->category = OptionCategory::infill;
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which periemters"
def->tooltip = L("Give to the infill algorithm if the infill needs to be connected, and on which perimeters"
" Can be useful for art or with high infill/perimeter overlap."
" The result may varies between infill typers.");
" The result may vary between infill types.");
def->enum_keys_map = &ConfigOptionEnum<InfillConnection>::get_enum_values();
def->enum_values.push_back("connected");
def->enum_values.push_back("holes");
@ -2119,9 +2119,9 @@ void PrintConfigDef::init_fff_params()
def->label = L("Algorithm");
def->full_label = L("Dense infill algorithm");
def->category = OptionCategory::infill;
def->tooltip = L("Choose the way the dense layer is lay out."
" The automatic option let it try to draw the smallest surface with only strait lines inside the sparse infill."
" The anchored just enlarge a bit (by 'Default infill margin') the surfaces that need a better support.");
def->tooltip = L("Choose the way the dense layer is laid out."
" The automatic option lets it try to draw the smallest surface with only strait lines inside the sparse infill."
" The Anchored option just slightly enlarges (by 'Default infill margin') the surfaces that need a better support.");
def->enum_keys_map = &ConfigOptionEnum<DenseInfillAlgo>::get_enum_values();
def->enum_values.push_back("automatic");
def->enum_values.push_back("autosmall");
@ -2147,7 +2147,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Infill width");
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for infill. "
"If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"If left as zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"You may want to use fatter extrudates to speed up the infill and make your parts stronger. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
"\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
@ -2186,7 +2186,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Only infill where needed");
def->category = OptionCategory::infill;
def->tooltip = L("This option will limit infill to the areas actually needed for supporting ceilings "
"(it will act as internal support material). If enabled, slows down the G-code generation "
"(it will act as internal support material). If enabled, this slows down the G-code generation "
"due to the multiple checks involved.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
@ -2314,7 +2314,7 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("This custom code is inserted at every extrusion type change."
"Note that you can use placeholder variables for all Slic3r settings as well as [extrusion_role], [layer_num] and [layer_z] that can take these string values:"
" { Perimeter, ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, Mixed }."
" Mixed is only used when the role of the extrusion is not unique, not exactly inside an other category or not known.");
" Mixed is only used when the role of the extrusion is not unique, not exactly inside another category or not known.");
def->cli = "feature-gcode";
def->multiline = true;
def->full_width = true;
@ -2365,7 +2365,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("fan_kickstart", coFloat);
def->label = L("Fan KickStart time");
def->category = OptionCategory::firmware;
def->tooltip = L("Add a M106 S255 (max speed for fan) for this amount of seconds before gonig down to the desired speed to kick-start the cooling fan."
def->tooltip = L("Add a M106 S255 (max speed for fan) for this amount of seconds before going down to the desired speed to kick-start the cooling fan."
"\nSet to 0 to deactivate.");
def->sidetext = L("s");
def->min = 0;
@ -2377,11 +2377,11 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Purpose of Machine Limits");
def->category = OptionCategory::limits;
def->tooltip = L("How to apply the Machine Limits."
"\n* In every case, they will be used as safeguard: Even if you use a print profile that set an acceleration of 5000,"
" if your machine limits the acceleration is 4000, the outputted gcode will use the 4000 limit."
"\n* You can also use it as safeguard and to have a better printing time estimate."
"\n* You can also use it as safeguard, to have a better printing time estimate and emit the limits as the begining of the gcode file, with M201 M202 M203 M204 and M205 commands."
" If you want only to write a sub-set, choose the 'for time estimate' option and write yourself gcodes in the custom gcode section.");
"\n* In every case, they will be used as safeguards: Even if you use a print profile that sets an acceleration of 5000,"
" if in your machine limits the acceleration is 4000, the outputted gcode will use the 4000 limit."
"\n* You can also use it as a safeguard and to have a better printing time estimate."
"\n* You can also use it as a safeguard, to have a better printing time estimate and emit the limits at the begining of the gcode file, with M201 M202 M203 M204 and M205 commands."
" If you want only to write a sub-set, choose the 'for time estimate' option and write your own gcodes in the custom gcode section.");
def->enum_keys_map = &ConfigOptionEnum<MachineLimitsUsage>::get_enum_values();
def->enum_values.push_back("emit_to_gcode");
def->enum_values.push_back("time_estimate_only");
@ -2541,7 +2541,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("max_print_speed", coFloat);
def->label = L("Max print speed");
def->category = OptionCategory::speed;
def->tooltip = L("When setting other speed settings to 0 Slic3r will autocalculate the optimal speed "
def->tooltip = L("When setting other speed settings to 0, Slic3r will autocalculate the optimal speed "
"in order to keep constant extruder pressure. This experimental setting is used "
"to set the highest print speed you want to allow.");
def->sidetext = L("mm/s");
@ -2639,7 +2639,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("min_width_top_surface", coFloatOrPercent);
def->label = L("Minimum top width for infill");
def->category = OptionCategory::speed;
def->tooltip = L("If a top surface has to be printed and it's partially covered by an other layer, it won't be considered at a top layer where its width is below this value."
def->tooltip = L("If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value."
" This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters."
" This value can be a mm or a % of the perimeter extrusion width.");
def->sidetext = L("mm or %");
@ -2671,7 +2671,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("notes", coString);
def->label = L("Configuration notes");
def->category = OptionCategory::notes;
def->tooltip = L("You can put here your personal notes. This text will be added to the G-code "
def->tooltip = L("Here you can put your personal notes. This text will be added to the G-code "
"header comments.");
def->multiline = true;
def->full_width = true;
@ -2735,7 +2735,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Only retract when crossing perimeters");
def->category = OptionCategory::extruders;
def->tooltip = L("Disables retraction when the travel path does not exceed the upper layer's perimeters "
"(and thus any ooze will be probably invisible).");
"(and thus any ooze will probably be invisible).");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));
@ -2798,7 +2798,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Reverse on odd");
def->full_label = L("Overhang reversal");
def->category = OptionCategory::perimeter;
def->tooltip = L("Extrude perimeters that have a part over an overhang in the reverse direction in odd layers. That alternating pattern can drastically improve steep overhang."
def->tooltip = L("Extrude perimeters that have a part over an overhang in the reverse direction on odd layers. This alternating pattern can drastically improve steep overhang."
"\n!! this is a very slow algorithm (it uses the same results as extra_perimeters_overhangs) !!");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
@ -2816,12 +2816,12 @@ void PrintConfigDef::init_fff_params()
def = this->add("no_perimeter_unsupported_algo", coEnum);
def->label = L("No perimeters on bridge areas");
def->category = OptionCategory::perimeter;
def->tooltip = L("Experimental option to remove perimeters where there is nothing under it and where a bridged infill should be better. "
"\n * Remove perimeters: remove the unsupported perimeters, let the bridge area as-is."
def->tooltip = L("Experimental option to remove perimeters where there is nothing under them and where a bridged infill should be better. "
"\n * Remove perimeters: remove the unsupported perimeters, leave the bridge area as-is."
"\n * Keep only bridges: remove the perimeters in the bridge areas, keep only bridges that end in solid area."
"\n * Keep bridges and overhangs: remove the unsupported perimeters, keep only bridges that end in solid area, fill the rest with overhang perimeters+bridges."
"\n * Fill the voids with bridges: remove the unsupported perimeters, draw bridges over the whole hole.*"
" !! this one can escalate to problems with overhangs shape like /\\, so you should use it only on one layer at a time via the height-range modifier!"
" !! this one can escalate to problems with overhangs shaped like /\\, so you should use it only on one layer at a time via the height-range modifier!"
"\n!!Computationally intensive!!. ");
def->enum_keys_map = &ConfigOptionEnum<NoPerimeterUnsupportedAlgo>::get_enum_values();
def->enum_values.push_back("none");
@ -2871,7 +2871,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Round corners for perimeters");
def->category = OptionCategory::perimeter;
def->tooltip = L("Internal perimeters will go around sharp corners by turning around instead of making the same sharp corner."
" This can help when there is visible holes in sharp corners on perimeters");
" This can help when there are visible holes in sharp corners on perimeters");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
@ -2999,7 +2999,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("support_material_solid_first_layer", coBool);
def->label = L("Solid first layer");
def->category = OptionCategory::support;
def->tooltip = L("Use a solid layer instead of a raft for the layer that touch the build plate.");
def->tooltip = L("Use a solid layer instead of a raft for the layer that touches the build plate.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
@ -3066,7 +3066,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("print_retract_length", coFloat);
def->label = L("Retraction length");
def->category = OptionCategory::filament;
def->tooltip = L("Override the retract_length settign from the printer config. Used for calibration. Set negative to disable");
def->tooltip = L("Override the retract_length setting from the printer config. Used for calibration. Set negative to disable");
def->mode = comExpert;
def->set_default_value(new ConfigOptionFloat( -1.f));
@ -3100,6 +3100,8 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("retract_lift_below", coFloats);
def->label = L("Below Z");
def->full_label = L("Only lift Z below");
@ -3154,7 +3156,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Retraction Speed");
def->full_label = L("Retraction Speed");
def->category = OptionCategory::extruders;
def->tooltip = L("The speed for retractions (it only applies to the extruder motor).");
def->tooltip = L("The speed for retractions (this only applies to the extruder motor).");
def->sidetext = L("mm/s");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 40. });
@ -3164,7 +3166,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Deretraction Speed");
def->category = OptionCategory::extruders;
def->tooltip = L("The speed for loading of a filament into extruder after retraction "
"(it only applies to the extruder motor). If left to zero, the retraction speed is used.");
"(this only applies to the extruder motor). If left as zero, the retraction speed is used.");
def->sidetext = L("mm/s");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
@ -3172,7 +3174,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("seam_position", coEnum);
def->label = L("Seam position");
def->category = OptionCategory::perimeter;
def->tooltip = L("Position of perimeters starting points."
def->tooltip = L("Position of perimeters' starting points."
"\n ");
def->enum_keys_map = &ConfigOptionEnum<SeamPosition>::get_enum_values();
def->enum_values.push_back("near");
@ -3200,7 +3202,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Travel cost");
def->full_label = L("Seam travel cost");
def->category = OptionCategory::perimeter;
def->tooltip = L("Cost of moving the extruder. The highest penalty is when the point is the farest from the position of the extruder before extruding the external periemter");
def->tooltip = L("Cost of moving the extruder. The highest penalty is when the point is the furthest from the position of the extruder before extruding the external perimeter");
def->sidetext = L("%");
def->min = 0;
def->mode = comExpert;
@ -3254,7 +3256,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Skirt width");
def->category = OptionCategory::width;
def->tooltip = L("Horizontal width of the skirt that will be printed around each object."
" If left zero, first layer extrusion width will be used if set and the skirt is only 1 layer height"
" If left as zero, first layer extrusion width will be used if set and the skirt is only 1 layer height"
", or perimeter extrusion width will be used (using the computed value if not set).");
def->sidetext = L("mm or %");
def->min = 0;
@ -3310,8 +3312,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("Min length");
def->full_label = L("Min small perimeters length");
def->category = OptionCategory::speed;
def->tooltip = L("This set the threshold for small periemter length. Every loop with a length lower than that will be printed at small perimeter speed"
"\nCan be a mm or a % of the nozzle diameter.");
def->tooltip = L("This sets the threshold for small perimeter length. Every loop with a length lower than this will be printed at small perimeter speed"
"\nCan be a mm value or a % of the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -3323,8 +3325,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("Max length");
def->full_label = L("Max small perimeters length");
def->category = OptionCategory::speed;
def->tooltip = L("This set the end of the threshold for small periemter length."
" Every periemter loop lower than that will see their speed reduced a bit, from their normal spee at this length down to small perimeter speed."
def->tooltip = L("This sets the end of the threshold for small perimeter length."
" Every perimeter loop lower than this will see their speed reduced a bit, from their normal speed at this length down to small perimeter speed."
"\nCan be a mm or a % of the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
@ -3338,7 +3340,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::slicing;
def->tooltip = L("Minimum (convex) angle at a vertex to enable smoothing"
" (trying to create a curve around the vertex). "
"180 : nothing will be smooth, 0 : all angles will be smoothen.");
"180 : nothing will be smooth, 0 : all angles will be smoothened.");
def->sidetext = L("°");
def->aliases = { "curve_smoothing_angle" };
def->cli = "curve-smoothing-angle-convex=f";
@ -3353,7 +3355,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::slicing;
def->tooltip = L("Minimum (concave) angle at a vertex to enable smoothing"
" (trying to create a curve around the vertex). "
"180 : nothing will be smooth, 0 : all angles will be smoothen.");
"180 : nothing will be smooth, 0 : all angles will be smoothened.");
def->sidetext = L("°");
def->cli = "curve-smoothing-angle-concave=f";
def->min = 0;
@ -3365,9 +3367,9 @@ void PrintConfigDef::init_fff_params()
def->label = L("Precision");
def->full_label = L("Curve smoothing precision");
def->category = OptionCategory::slicing;
def->tooltip = L("These parameter allow the slicer to smooth the angles in each layer. "
def->tooltip = L("These parameters allow the slicer to smooth the angles in each layer. "
"The precision will be at least the new precision of the curve. Set to 0 to deactivate."
"\nNote: as it use the polygon's edges and only work in the 2D planes, "
"\nNote: as it uses the polygon's edges and only works in the 2D planes, "
"you must have a very clean or hand-made 3D model."
"\nIt's really only useful to smoothen functional models or very wide angles.");
def->sidetext = L("mm");
@ -3381,7 +3383,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("cutoff");
def->full_label = L("Curve smoothing cutoff dist");
def->category = OptionCategory::slicing;
def->tooltip = L("Maximum distance between two points to allow adding new ones. Allow to avoid distording long strait areas. 0 to disable.");
def->tooltip = L("Maximum distance between two points to allow adding new ones. Allow to avoid distorting long strait areas. 0 to disable.");
def->sidetext = L("mm");
def->min = 0;
def->cli = "curve-smoothing-cutoff-dist=f";
@ -3408,7 +3410,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("solid_infill_every_layers", coInt);
def->label = L("Solid infill every");
def->category = OptionCategory::infill;
def->tooltip = L("This feature allows to force a solid layer every given number of layers. "
def->tooltip = L("This feature allows you to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); "
"Slic3r will automatically choose the maximum possible number of layers "
"to combine according to nozzle diameter and layer height.");
@ -3422,7 +3424,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Solid infill width");
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. "
"If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"If left as zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
"\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
@ -3502,7 +3504,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Start G-code");
def->category = OptionCategory::customgcode;
def->tooltip = L("This start procedure is inserted at the beginning, after bed has reached "
"the target temperature and extruder just started heating, and before extruder "
"the target temperature and extruder has just started heating, but before extruder "
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
"such commands will not be prepended automatically so you're free to customize "
"the order of heating commands and other custom actions. Note that you can use "
@ -3654,8 +3656,8 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Support contact distance type");
def->category = OptionCategory::support;
def->tooltip = L("How to compute the vertical z-distance.\n"
"From filament: it use the nearest bit of the filament. When a bridge is extruded, it goes below the current plane.\n"
"From plane: it use the plane-z. Same than 'from filament' if no 'bridge' is extruded.\n"
"From filament: it uses the nearest bit of the filament. When a bridge is extruded, it goes below the current plane.\n"
"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is extruded.\n"
"None: No z-offset. Useful for Soluble supports.\n");
def->enum_keys_map = &ConfigOptionEnum<SupportZDistanceType>::get_enum_values();
def->enum_values.push_back("filament");
@ -3721,7 +3723,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Support material width");
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for support material. "
"If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. "
"If left as zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
@ -3796,7 +3798,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Pattern");
def->full_label = L("Support interface pattern");
def->category = OptionCategory::support;
def->tooltip = L("Pattern for interface layer.");
def->tooltip = L("Pattern for interface layers.");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values.push_back("rectilinear");
def->enum_values.push_back("monotonic");
@ -3879,14 +3881,14 @@ void PrintConfigDef::init_fff_params()
def = this->add("print_temperature", coInt);
def->label = L("Temperature");
def->category = OptionCategory::filament;
def->tooltip = L("Override the temperature of the extruder. Avoid doing too many changes, it won't stop for cooling/heating. 0 to disable. May only works on Height range modifiers.");
def->tooltip = L("Override the temperature of the extruder. Avoid making too many changes, it won't stop for cooling/heating. 0 to disable. May only work on Height range modifiers.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("print_retract_lift", coFloat);
def->label = L("Z-lift override");
def->category = OptionCategory::filament;
def->tooltip = L("Set the new lift-z value for this override. 0 will disable the z-lift. -& to disable. May only works on Height range modifiers.");
def->tooltip = L("Set the new lift-z value for this override. 0 will disable the z-lift. -& to disable. May only work on Height range modifiers.");
def->sidetext = L("mm");
def->mode = comExpert;
def->set_default_value(new ConfigOptionFloat(-1));
@ -3895,7 +3897,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Overlapping external perimeter");
def->full_label = L("Overlapping external perimeter");
def->category = OptionCategory::perimeter;
def->tooltip = L("Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that their flow isn't adjusted and so it will result in over-extruding and undefined behavior.");
def->tooltip = L("Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that flow isn't adjusted and so this will result in over-extruding and undefined behavior.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));
@ -3944,7 +3946,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Thin wall merge");
def->category = OptionCategory::perimeter;
def->tooltip = L("Allow the external perimeter to merge the thin walls in the path."
" You can deactivate it if you use thin walls as a custom support, to reduce adhesion a little bit.");
" You can deactivate this if you are using thin walls as a custom support, to reduce adhesion a little.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));
@ -3952,7 +3954,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Thin walls");
def->full_label = L("Thin walls speed");
def->category = OptionCategory::speed;
def->tooltip = L("Speed for thin wall (external extrusion that are alone because the obect is too thin at these places).");
def->tooltip = L("Speed for thin walls (external extrusions that are alone because the obect is too thin at these places).");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
@ -3973,7 +3975,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("time_estimation_compensation", coPercent);
def->label = L("Time estimation compensation");
def->category = OptionCategory::firmware;
def->tooltip = L("This setting allow you to modify the time estiamtion by a % amount. As Slic3r only use the marlin algorithm, it's not precise enough if an other firmware is used.");
def->tooltip = L("This setting allows you to modify the time estimation by a % amount. As Slic3r only uses the Marlin algorithm, it's not precise enough if another firmware is used.");
def->mode = comAdvanced;
def->sidetext = L("%");
def->min = 0;
@ -3986,7 +3988,7 @@ void PrintConfigDef::init_fff_params()
"expected to take care of the toolchange yourself - Slic3r will not output any other G-code to "
"change the filament. You can use placeholder variables for all Slic3r settings as well as [previous_extruder] "
"and [next_extruder], so e.g. the standard toolchange command can be scripted as T[next_extruder]."
"!! Warning !!: if any charater is written here, Slic3r won't output any toochange command by itself.");
"!! Warning !!: if any character is written here, Slic3r won't output any toochange command by itself.");
def->multiline = true;
def->full_width = true;
def->height = 5;
@ -3996,7 +3998,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("tool_name", coStrings);
def->label = L("Tool name");
def->category = OptionCategory::extruders;
def->tooltip = L("Only used for klipper, where you can name the extruder. If not set, will be 'extruderX' with 'X' replaced by the extruder number.");
def->tooltip = L("Only used for Klipper, where you can name the extruder. If not set, will be 'extruderX' with 'X' replaced by the extruder number.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionStrings(""));
@ -4005,7 +4007,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. "
"You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. "
"If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. "
"If left as zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
"\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
@ -4170,7 +4172,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe_advanced_nozzle_melted_volume", coFloat);
def->label = L("Nozzle volume");
def->tooltip = L("The volume of melted plastic inside your nozlle. Used by 'advanced wiping'.");
def->tooltip = L("The volume of melted plastic inside your nozzle. Used by 'advanced wiping'.");
def->sidetext = L("mm3");
def->mode = comExpert;
def->set_default_value(new ConfigOptionFloat(120));
@ -4195,7 +4197,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe_advanced_algo", coEnum);
def->label = L("Algorithm");
def->full_label = L("Auto-wipe algorithm");
def->tooltip = L("Algo for the advanced wipe.\n"
def->tooltip = L("Algorithm for the advanced wipe.\n"
"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n"
"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ volume_mult * (pigmentBefore-pigmentAfter)^3\n"
"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / (0.5+pigmentAfter)");
@ -4211,7 +4213,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe_tower_brim", coFloatOrPercent);
def->label = L("Wipe tower brim width");
def->tooltip = L("Width of the brim for the wipe tower. Can be in mm of in % of the (assumed) only one nozzle diameter.");
def->tooltip = L("Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) only one nozzle diameter.");
def->ratio_over = "nozzle_diameter";
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(150,true));
@ -4250,7 +4252,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe_into_infill", coBool);
def->category = OptionCategory::wipe;
def->label = L("Wipe into this object's infill");
def->tooltip = L("Purging after toolchange will done inside this object's infills. "
def->tooltip = L("Purging after toolchange will be done inside this object's infills. "
"This lowers the amount of waste but may result in longer print time "
" due to additional travel moves.");
def->set_default_value(new ConfigOptionBool(false));
@ -4266,8 +4268,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe_extra_perimeter", coFloats);
def->category = OptionCategory::extruders;
def->label = L("Extra Wipe for external perimeters");
def->tooltip = L("When the external perimeter loop extrusion end, a wipe is done, going a bit inside the print."
" The number put in this setting increase the wipe by moving the nozzle again along the loop before the final wipe.");
def->tooltip = L("When the external perimeter loop extrusion ends, a wipe is done, going slightly inside the print."
" The number in this settting increases the wipe by moving the nozzle along the loop again before the final wipe.");
def->min = 0;
def->sidetext = L("mm");
def->mode = comAdvanced;
@ -4310,7 +4312,7 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("The convex holes will be grown / shrunk in the XY plane by the configured value"
" (negative = inwards, positive = outwards, should be negative as the holes are always a bit smaller irl)."
" This might be useful for fine-tuning hole sizes."
"\nThis setting behave the same as 'Inner XY size compensation' but only for convex shapes. It's added to 'Inner XY size compensation', it does not replace it. ");
"\nThis setting behaves the same as 'Inner XY size compensation' but only for convex shapes. It's added to 'Inner XY size compensation', it does not replace it. ");
def->sidetext = L("mm");
def->mode = comExpert;
def->set_default_value(new ConfigOptionFloat(0));
@ -4320,7 +4322,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("XY holes threshold");
def->category = OptionCategory::slicing;
def->tooltip = L("Maximum area for the hole where the hole_size_compensation will apply fully."
" After that, it will decraese down to 0 for four time this area."
" After that, it will decrease down to 0 for four times this area."
" Set to 0 to let the hole_size_compensation apply fully for all detected holes");
def->sidetext = L("mm²");
def->mode = comExpert;
@ -4341,8 +4343,8 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Polyhole detection margin");
def->category = OptionCategory::slicing;
def->tooltip = L("Maximum defection of a point to the estimated radius of the circle."
"\nAs cylinder are often exported as triangles of varying size, point may not be on the circle circumference."
" This setting allow you some leway to browden the detection."
"\nAs cylinders are often exported as triangles of varying size, points may not be on the circle circumference."
" This setting allows you some leway to broaden the detection."
"\nIn mm or in % of the radius.");
def->sidetext = L("mm²");
def->mode = comExpert;
@ -4362,7 +4364,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("z_step", coFloat);
def->label = L("Z full step");
def->tooltip = L("Set this to the height moved when your Z motor (or equivalent) turns one step."
"If your motor needs 200 steps to move your head/plater by 1mm, this field have to be 1/200 = 0.005."
"If your motor needs 200 steps to move your head/plater by 1mm, this field should be 1/200 = 0.005."
"\nNote that the gcode will write the z values with 6 digits after the dot if z_step is set (it's 3 digits if it's disabled)."
"\nPut 0 to disable.");
def->cli = "z-step=f";
@ -4529,7 +4531,7 @@ void PrintConfigDef::init_milling_params()
def = this->add("milling_toolchange_end_gcode", coStrings);
def->label = L("G-Code to switch from this toolhead");
def->category = OptionCategory::milling_extruders;
def->tooltip = L("Put here the gcode to end the toolhead action, like stopping the spindle. You have access to [next_extruder] and [previous_extruder]."
def->tooltip = L("Enter here the gcode to end the toolhead action, like stopping the spindle. You have access to [next_extruder] and [previous_extruder]."
" previous_extruder is the 'extruder number' of the current milling tool, it's equal to the index (begining at 0) of the milling tool plus the number of extruders."
" next_extruder is the 'extruder number' of the next tool, it may be a normal extruder, if it's below the number of extruders."
" The number of extruder is available at [extruder]and the number of milling tool is available at [milling_cutter].");
@ -4547,7 +4549,7 @@ void PrintConfigDef::init_milling_params()
def = this->add("milling_extra_size", coFloatOrPercent);
def->label = L("Milling extra XY size");
def->category = OptionCategory::milling;
def->tooltip = L("This increase the size of the object by a certain amount to have enough plastic to mill."
def->tooltip = L("This increases the size of the object by a certain amount to have enough plastic to mill."
" You can set a number of mm or a percentage of the calculated optimal extra width (from flow calculation).");
def->sidetext = L("mm or %");
def->ratio_over = "computed_on_the_fly";
@ -4557,7 +4559,7 @@ void PrintConfigDef::init_milling_params()
def = this->add("milling_after_z", coFloatOrPercent);
def->label = L("Milling only after");
def->category = OptionCategory::milling;
def->tooltip = L("This setting restrict the post-process milling to a certain height, to avoid milling the bed. It can be a mm of a % of the first layer height (so it can depends of the object).");
def->tooltip = L("This setting restricts the post-process milling to a certain height, to avoid milling the bed. It can be a mm or a % of the first layer height (so it can depend on the object).");
def->sidetext = L("mm or %");
def->ratio_over = "first_layer_height";
def->mode = comAdvanced;
@ -4931,7 +4933,7 @@ void PrintConfigDef::init_sla_params()
def = this->add("support_pillar_widening_factor", coFloat);
def->label = L("Pillar widening factor");
def->category = OptionCategory::support;
def->tooltip = L("Merging bridges or pillars into another pillars can "
def->tooltip = L("Merging bridges or pillars into other pillars can "
"increase the radius. Zero means no increase, one means "
"full increase.");
def->min = 0;