GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-07-31 05:32:00 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

tooltip update

Browse Source
This commit is contained in:
supermerill 2022-01-04 23:10:42 +01:00
parent 74e01b5759
commit 3a2256e888
1 changed files with 9 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/libslic3r/PrintConfig.cpp
View File

@ -1257,7 +1257,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("extrusion_width", coFloatOrPercent);
def->label = L("Default extrusion width");
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to allow a manual extrusion width. "
def->tooltip = L("This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width fields. It's useless when all other width fields have a value."
"Set this to a non-zero value to allow a manual extrusion width. "
"If left to zero, Slic3r derives extrusion widths from the nozzle diameter "
"(see the tooltips for perimeter extrusion width, infill extrusion width etc). "
"If expressed as percentage (for example: 105%), it will be computed over nozzle diameter."
@ -1275,7 +1276,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("extrusion_spacing", coFloatOrPercent);
def->label = L("Default extrusion spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like Default extrusion width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
def->tooltip = L("This is the DEFAULT extrusion spacing. It's convert to a width and this width can be used to REPLACE 0-width fields. It's useless when all width fields have a value."
"Like Default extrusion width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
"\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
@ -3372,8 +3374,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("resolution_internal", coFloat);
def->label = L("Internal resolution");
def->category = OptionCategory::slicing;
def->tooltip = L("Minimum detail resolution, used for internal strutures (gapfill and some infill patterns)."
"\nDon't put a too small value (0.05mm is way too low for many printers), as it may creates too many very small segments that may difficult to display and print.");
def->tooltip = L("Minimum detail resolution, used for internal structures (gapfill and some infill patterns)."
"\nDon't put a too-small value (0.05mm is way too low for many printers), as it may create too many very small segments that may be difficult to display and print.");
def->sidetext = L("mm");
def->min = 0.001;
def->precision = 8;
@ -4573,8 +4575,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe", coBools);
def->label = L("Wipe while retracting");
def->category = OptionCategory::extruders;
def->tooltip = L("This flag will move the nozzle while retracting to minimize the possible blob "
"on leaky extruders.");
def->tooltip = L("This flag will move the nozzle while retracting to minimize the possible blob on leaky extruders."
"\nNote that as a wipe only happens when there is a retraction, the 'only retract when crossing perimeters' print setting can greatly reduce the number of wipes.");
def->mode = comAdvanced;
def->is_vector_extruder = true;
def->set_default_value(new ConfigOptionBools{ false });
@ -4582,7 +4584,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("wipe_only_crossing", coBools);
def->label = L("Wipe only when crossing perimeters");
def->category = OptionCategory::extruders;
def->tooltip = L("Don't wipe when you don't cross a perimeter.");
def->tooltip = L("Don't wipe when you don't cross a perimeter. Need 'only_retract_when_crossing_perimeters'and 'wipe' enabled.");
def->mode = comAdvanced;
def->is_vector_extruder = true;
def->set_default_value(new ConfigOptionBools{ true });